NT *RoHS VCEOARVMSIAPILOLINAASBLE Features Applications NT MPLIA n Lead free as standard* n HDMI 1.4 HS CO n ESD protection 30 kV max. n Digital Visual Interface (DVI) Ro n Low capacitance ~ 1.0 pF n USB 3.0 / USB OTG ** n Protects 1 line n Memory protection n Uni/bidirectional configuration n SIM card ports REE D F LEA CDSOD323-TxxLC - TVS Diode Series General Information Pcchooamrtllapebonlngeei ncngot smt.hme usneimcaictioonnds,u ccotomr pinudtuinsgtr ayn tdoLVE EAvdRDH SieISdF ORCveNEOeSE oMAlPo RLeIE pAqN Tui*nipcrmeaesnitn mglayn sumfaacllteurr eerles catrreo n ic UNIDIRE1CTIONAL BIDIREC1TIONAL Bourns offers Transient Voltage SuppressoRor Diodes for surge and ESD protection applications in SOD323 package size format. The Transient Voltage Suppressor Diode series offers a choice of voltage types ranging from 5 V to 24 V in a unidirectional or bidirectional configuration. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle on standard pick and place equipment and their flat configuration minimizes roll away. The Bourns® device will assist compliance with IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 2 2 61000-4-5 (Surge) requirements. Note: For 12 V and 24 V VDSL applications, the CDSOD323-TxxC-DSL family of devices is recommended. Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Unidirectional Peak Pulse Power (tp = 8/20 µs) PPP 350 W Bidirectional Peak Pulse Power (tp = 8/20 µs) PPP 250 W Operating Temperature TL -55 to +150 ºC Storage Temperature TSTG -55 to +150 ºC ESD Protection (per IEC 61000-4-2) Contact - Min. ±8 Contact - Max. ESD ±30 kV Air - Min. ±15 Air - Max. ±30 CDSOD323- Uni- Bi- Uni- Bi- Uni- Bi- Parameter Symbol T05L T05LC T08L T08LC T12L T12LC Unit Min. Breakdown Voltage @ 1 mA VBR 6.0 6.0 8.5 8.5 13.3 13.3 V Working Peak Voltage V 5.0 5.0 8.0 8.0 12.0 12.0 V M Maximum Clamping Voltage @ I = 1 A V 9.8 9.8 13.4 13.4 19.0 19.0 V P C Typical Clamping Voltage 18.3 V @ 18.3 V @ 18.3 V @ 18.3 V 28.6 V @ 28.6 V @ V V @ 8/20 µs @ I C 15 A 15 A 15 A @ 15 A 11 A 11 A PP Maximum Leakage Current @ V I 5 5 2 2 1 1 µA WM D Typical Capacitance @ 0 V, 1 MHz CP 1.0 pF Notes: 1. Part numbers with suffix “C” indicate bidirectional device, i.e. CDSOD323-T05LC. 2. For bidirectional devices only, the electrical specifications apply in both directions. 3. Unidirectional only: Positive potential is applied from pin 1 to 2. *No lead detected in standard tests of homogeneous materials. **RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CDSOD323-TxxLC - TVS Diode Series Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) CDSOD323- Uni- Bi- Uni- Bi- Uni- Bi- Parameter Symbol T15L T15LC T18L T18LC T24L T24LC Unit Min. Breakdown Voltage @ 1 mA VBR 16.7 16.7 20.0 20.0 26.7 26.7 V Working Peak Voltage V 15.0 15.0 18.0 18.0 24.0 24.0 V M Maximum Clamping Voltage @ I = 1 A V 24.0 24.0 29.0 29.0 43.0 43.0 V P C Typical Clamping Voltage 31.8 V 31.8 V 45.0 V 45.0 V 56.0 V 56.0 V V V @ 8/20 µs @ I C @ 10 A @ 10 A @ 8 A @ 8 A @ 6 A @ 6 A PP Maximum Leakage Current @ V I 1 µA WM D Typical Capacitance @ 0 V, 1 MHz CJ 1.0 pF Notes: 1. Part numbers with suffix “C” indicate bidirectional device, i.e. CDSOD323-T05LC. 2. For bidirectional devices only, the electrical specifications apply in both directions. 3. Unidirectional only: Positive potential is applied from pin 1 to 2. Performance Graphs Peak Pulse Power vs. Pulse Time Pulse Waveform 10,000 120 nt (W) % of I)PP 100 tt tTttd e ==s t82 W 0µ saµvseform Parameters urre 1,000 350 W, 8/20 µs Waveform nt ( 80 et C e Pulse e Curr 60 – Peak 100 ak Puls 40 td = t|IPP/2 P PP – Pe 20 10 I PP 0 0.1 1 10 100 1,000 10,000 0 5 10 15 20 25 30 td – Pulse Duration (µs) t – Time (µs) Block Diagram How to Order UNIDIRECTIONAL BIDIRECTIONAL CD SOD323 - T 05 LC 1 1 Common Code Chip Diode Package • SOD323 = SOD-323 Package Model T = Transient Voltage Suppressor Working Peak Reverse Voltage 05 = 5 VRWM (Volts) Suffix L = Ultralow Capacitance Unidirectional Diode 2 2 LC = Ultralow Capacitance Bidirectional Diode Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CDSOD323-TxxLC - TVS Diode Series C A Product DimEensions Recommended Footprint This is a molded JEDEC SOD-323 package with lead free 100 % B W Sn plating on the terminations. It weighs approximately 30 mg and has a flammability rating of UL 94V-0. CATHODE BAND C (FOR UNIDIRECTIONAL PRODUCTS ONLY) A L S L F D H E B W Dimensions (Nominal) J 0.80 L (0.031) L S L F D H 1.40 S (0.055) J 0.50 W (0.020) MM DIMENSIONS: (INCHES) Dimensions 1.60 - 1.90 A Typical Part Marking (0.063 - 0.075) Each device has device marking outlined below and the 1.15 - 1.45 B unidirectional devices have an additional Polarity Band indicating (0.045 - 0.057) the cathode. 2.39 - 2.70 C (0.094 - 0.106) CDSOD323-T05L .........................................................................T5 CDSOD323-T05LC .......................................................................S5 0.92 - 1.14 D CDSOD323-T08L .........................................................................T8 (0.036 - 0.045) CDSOD323-T08LC .......................................................................S8 0.25 - 0.40 CDSOD323-T12L .......................................................................T12 E (0.010 - 0.016) CDSOD323-T12LC ....................................................................S12 CDSOD323-T15L .......................................................................T15 0.08 - 0.20 CDSOD323-T15LC ....................................................................S15 F (0.003 - 0.008) CDSOD323-T18L .......................................................................T18 CDSOD323-T18LC ....................................................................S18 0.13 H MAX. CDSOD323-T24L .......................................................................T24 (0.005) ......... CDSOD323-T24LC .....................................................................S24 0.30 - 0.45 J (0.012 - 0.018) MM Environmental Specifications DIMENSIONS: (INCHES) Moisture Sensitivity Level ................................................................1 ESD Classification (HBM).............................................................3B Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CDSOD323-TxxLC - TVS Diode Series Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard. P 0 d P1 E T Index Hole 120 ° F D2 W B D1 D P A C Product Trailer Orientation Device Leader ....... ....... ....... ....... W1 End ....... ....... ....... ....... Start MM DIMENSIONS: (INCHES) 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard Direction of Feed RS-481-A. Item Symbol SOD323 1.55 ± 0.10 Carrier Width A (0.061 ± 0.004) 2.90 ± 0.10 Carrier Length B (0.114 ± 0.004) 1.35 ± 0.10 Carrier Depth C (0.053 ± 0.004) 1.55 ± 0.05 Sprocket Hole d (0.061 ± 0.002) 178 Reel Outside Diameter D (7.008) 80.0 ... Reel Inner Diameter D1 (3.150) Min. Asia-Pacific: 13.0 ± 0.20 Tel: +886-2 2562-4117 Feed Hole Diameter D2 (0.512 ± 0.008) Email: asiacus@bourns.com 1.75 ± 0.10 Europe: Sprocket Hole Position E (0.069 ± 0.004) Tel: +36 88 520 390 3.50 ± 0.05 Email: eurocus@bourns.com Punch Hole Position F (0.138 ± 0.002) The Americas: 4.00 ± 0.10 Tel: +1-951 781-5500 Punch Hole Pitch P (0.157 ± 0.004) Email: americus@bourns.com 4.00 ± 0.10 www.bourns.com Sprocket Hole Pitch P0 (0.157 ± 0.004) 2.00 ± 0.05 Embossment Center P1 (0.079 ± 0.002) 0.20 ± 0.10 Overall Tape Thickness T (0.008 ± 0.004) REV. 01/18 8.00 ± 0.20 Tape Width W Specifications are subject to change without notice. (0.315 ± 0.008) The device characteristics and parameters in this data sheet can and do 13.5 . vary in different applications and actual device performance may vary over time. Reel Width W1 (0.531) Max. Users should verify actual device performance in their specific applications. Quantity per Reel -- 3,000