图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: CD4503BM96
  • 制造商: Texas Instruments
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

CD4503BM96产品简介:

ICGOO电子元器件商城为您提供CD4503BM96由Texas Instruments设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 CD4503BM96价格参考¥0.90-¥2.59。Texas InstrumentsCD4503BM96封装/规格:逻辑 - 缓冲器,驱动器,接收器,收发器, Buffer, Non-Inverting 2 Element 2, 4 (Hex) Bit per Element Push-Pull Output 16-SOIC。您可以下载CD4503BM96参考资料、Datasheet数据手册功能说明书,资料中有CD4503BM96 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

集成电路 (IC)半导体

描述

IC BUFF TRI-ST HEX N-INV 16SOIC缓冲器和线路驱动器 CMOS Hex Non- Inverting Buffer

产品分类

逻辑 - 缓冲器,驱动器,接收器,收发器

品牌

Texas Instruments

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

逻辑集成电路,缓冲器和线路驱动器,Texas Instruments CD4503BM964000B

数据手册

点击此处下载产品Datasheet

产品型号

CD4503BM96

产品种类

缓冲器和线路驱动器

传播延迟时间

150 ns at 5 V, 70 ns at 10 V, 50 ns at 15 V

低电平输出电流

19.2 mA

供应商器件封装

16-SOIC N

元件数

2

其它名称

296-31528-1

包装

剪切带 (CT)

单位重量

141.700 mg

商标

Texas Instruments

安装类型

表面贴装

安装风格

SMD/SMT

封装

Reel

封装/外壳

16-SOIC(0.154",3.90mm 宽)

封装/箱体

SOIC-16

工作温度

-55°C ~ 125°C

工厂包装数量

2500

最大功率耗散

100 mW

最大工作温度

+ 125 C

最小工作温度

- 55 C

极性

Non-Inverting

标准包装

1

每元件位数

2,4(六路)

每芯片的通道数量

5

电压-电源

3 V ~ 18 V

电流-输出高,低

14.1mA,23mA

电源电压-最大

18 V

电源电压-最小

3 V

电源电流

0.06 mA

系列

CD4503B

输入线路数量

6

输出类型

3-State

输出线路数量

6

逻辑类型

缓冲器/线路驱动器,非反相

逻辑系列

CD4000

高电平输出电流

- 8.2 mA

推荐商品

型号:CY74FCT245CTSOC

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:74LVTH244AD-Q100J

品牌:Nexperia USA Inc.

产品名称:集成电路(IC)

获取报价

型号:SN74HCT245PWRE4

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:74LCXH162244MTX

品牌:ON Semiconductor

产品名称:集成电路(IC)

获取报价

型号:MC74LCX541DTR2G

品牌:ON Semiconductor

产品名称:集成电路(IC)

获取报价

型号:SN74ALVTH162245GR

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:74HCT2G34GV-Q100H

品牌:Nexperia USA Inc.

产品名称:集成电路(IC)

获取报价

型号:SN74LS07NSRE4

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

样品试用

万种样品免费试用

去申请
CD4503BM96 相关产品

SN74LVTH125PWE4

品牌:Texas Instruments

价格:¥4.03-¥9.12

SN74LVC1G34DRYR

品牌:Texas Instruments

价格:

74LVC1G125GV,125

品牌:Nexperia USA Inc.

价格:¥0.28-¥1.51

74LVC623APW-Q100J

品牌:NXP USA Inc.

价格:

SN74LVC244AN

品牌:Texas Instruments

价格:¥1.75-¥5.03

SN74AHCT126PWG4

品牌:Texas Instruments

价格:

SN74AUP2G241DCUR

品牌:Texas Instruments

价格:¥1.43-¥4.11

74LCX16245MTDX

品牌:ON Semiconductor

价格:¥2.35-¥2.93

PDF Datasheet 数据手册内容提取

Data sheet acquired from Harris Semiconductor SCHS068C − Revised October 2003 CD4503B is a hex noninverting buffer with 3-state outputs having high sink- and source-current capability. Two disable controls are provided, one of which controls four buffers and the other controls the remaining two buffers. The CD4503B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes). Copyright © 2003, Texas Instruments Incorporated

None

None

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) CD4503BE ACTIVE PDIP N 16 25 Green (RoHS NIPDAU N / A for Pkg Type -55 to 125 CD4503BE & no Sb/Br) CD4503BEE4 ACTIVE PDIP N 16 25 Green (RoHS NIPDAU N / A for Pkg Type -55 to 125 CD4503BE & no Sb/Br) CD4503BF ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type -55 to 125 CD4503BF CD4503BF3A ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type -55 to 125 CD4503BF3A CD4503BM ACTIVE SOIC D 16 40 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 CD4503BM & no Sb/Br) CD4503BM96 ACTIVE SOIC D 16 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 CD4503BM & no Sb/Br) CD4503BNSR ACTIVE SO NS 16 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 CD4503B & no Sb/Br) CD4503BPW ACTIVE TSSOP PW 16 90 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 CM503B & no Sb/Br) CD4503BPWR ACTIVE TSSOP PW 16 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 CM503B & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF CD4503B, CD4503B-MIL : •Catalog: CD4503B •Military: CD4503B-MIL NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Military - QML certified for Military and Defense Applications Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2018 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) CD4503BM96 SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 CD4503BNSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 CD4503BPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2018 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) CD4503BM96 SOIC D 16 2500 333.2 345.9 28.6 CD4503BNSR SO NS 16 2000 367.0 367.0 38.0 CD4503BPWR TSSOP PW 16 2000 367.0 367.0 35.0 PackMaterials-Page2

None

None

None

None

PACKAGE OUTLINE PW0016A TSSOP - 1.2 mm max height SCALE 2.500 SMALL OUTLINE PACKAGE SEATING PLANE C 6.6 TYP 6.2 A 0.1 C PIN 1 INDEX AREA 14X 0.65 16 1 2X 5.1 4.55 4.9 NOTE 3 8 9 0.30 B 4.5 16X 0.19 1.2 MAX 4.3 0.1 C A B NOTE 4 (0.15) TYP SEE DETAIL A 0.25 GAGE PLANE 0.15 0.05 0.75 0.50 0 -8 DETA 20AIL A TYPICAL 4220204/A 02/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side. 5. Reference JEDEC registration MO-153. www.ti.com

EXAMPLE BOARD LAYOUT PW0016A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 16X (1.5) SYMM (R0.05) TYP 1 16X (0.45) 16 SYMM 14X (0.65) 8 9 (5.8) LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE: 10X SOLDER MASK METAL UNDER SOLDER MASK OPENING METAL SOLDER MASK OPENING EXPOSED METAL EXPOSED METAL 0.05 MAX 0.05 MIN ALL AROUND ALL AROUND NON-SOLDER MASK SOLDER MASK DEFINED DEFINED (PREFERRED) SOLDE15.000R MASK DETAILS 4220204/A 02/2017 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN PW0016A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 16X (1.5) SYMM (R0.05) TYP 1 16X (0.45) 16 SYMM 14X (0.65) 8 9 (5.8) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE: 10X 4220204/A 02/2017 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated