CCM02 MK2 Series Features Typical Applications • Operating life 500,000 cycles • Transaction • Insertion force 40N • Identification • EMV • POS • PCI & PCI ready • Card detection sealed switch e z i S ll Mechanical Contact Electrical Data u F Number of Contacts 8 Insulation resistance 1,000 MΩ min Mechanical life 500,000 cycles min Resistance 100 mΩ max Card insertion force 10N to 40N Current rating 10 µA min / 1 A max Card extraction force 1N min / 10N max Contact force 0,2N / 0,50N max Dielectric strength 750 Vrms min Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop) 1,8 N max for complete depression Switch Electrical Data Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Card detection switch Normally open Duration 6 hours - amplitude 0,35mm Max elect. discontinuity 1µs Contact resistance 100 mΩ max Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Dielectric strength 250 Vrms min Current rating 1 mA min / 10 mA max Packaging Tray 30 parts / Cartons 300 parts Maximum power 0.2 VA Reel 120 parts Environmental Data Soldering Operating temperature -40°C to +85°C Compatible with lead free reflow soldering process For version with security cover, please contact Customer Service for Damp heat IEC 512 test number 11c (10 days) soldering recommendations. Salt mist IEC 512 test number 11f (96 hours) Card detection switch Sealed against dust RoHS compliant PCI Features Total Height Designation Termination Contact Type I/O Protect Security Cover Dimension PCB version Packaging (mm) CCM02-2503LFT THT landing 6,25 38,5 X 55,6 4 clips Tray CCM02-2504LFT SMT landing 6,25 38,5 X 55,6 4 clips Tray CCM02-2508LFT SMT landing 6,25 38,5 X 55,6 4 clips Tray CCM02-F508LFT SMT friction 6,25 36,5 X 55,6 2 plastic pegs Tray CCM02-F844LFT SMT friction Yes Yes 6,6 40,5 X 58 4 metal pegs Tray / Reel Dimensions are shown in mm 4 dec 18 Specifications and dimensions subject to change www.ckwitches.com     14

CCM02 MK2 Series PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PCB through spring finger contacts. Process It must be in open position during the reflow soldering of the connector and has to be locked in closed position after soldering. e z i S l l u F I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. Ordering code: C-CM02-E50 PCI: Security Cover Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PCB through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. 4 dec 18 Specifications and dimensions subject to change www.ckwitches.com     15

CCM02 MK2 Series CCM02-2503 LFT 55,6±0,2 0.65 DETAIL A CB Thickness ECmhabnonsesled 4,3±0,2 Scale 5 1,6 P 6,25 e z 19,12 5x 2,54 0,95 (3,2) i S 4 Snap 10x 0,7 4x 3,15 ull Feet 0,3 A B ø 0,2 A B 2,9±0,2 F 52 A A-A 5,75 Designation & Date-Code area "CCM02" marking is optional SEE DETAIL A Card stop A 3,2 12,7 1±0,25 15,7 10 4 B 38,5 14 12,7 F503T XX XX 20 A 7,7±0,3 Card insertion direction 4,15±0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline 0 19,12 21,66 24,2 26,74 29,28 31,82 52 SWSW C1 C2 C3C4 3,2 10 12,7 Cswairtdc he ntedr mtrainvaells (55,6) 00 3,81 3,81 XX XXF503T 12,7 (50) (38,5) 14 C5C6C7 C8 20 1,8 ø 1+ 00,1 10x ø 0,1 (4x) ø 3,2 + 00,1 ø 0,1 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm 4 dec 18 Specifications and dimensions subject to change www.ckwitches.com     16

CCM02 MK2 Series CCM02-2504 LFT e z i S l l u F Contact location according to ISO 7816-2 Dimensions are shown in mm 4 dec 18 Specifications and dimensions subject to change www.ckwitches.com     17

CCM02 MK2 Series CCM02-2508 LFT / CCM02 F508 LFT 55,6 0,2 2 0,65 54,3 0, DETAIL A 2,05 ECmhabnonsesled 0,95 4,3 0,8 2 Scale 5 5 e 6,2 3,2) 0,8 z ( Si 18,87 5x 2,54 06-0.1 l 2 Pegs 2x 3,1 1, ul 0,2 A B 0,2 0,15 F 51,5 A 2 SEE DETAIL A A-A Designation & Date-Code area "CCMA02" marking is optional +0,43,2-0,2 5,75 Card stop 5 2 14 0,3 10, 15,7 B 7,5 6 2 5 8, 3 0 1 F508T 20 XX XX 3 0, 7 A 7, 10x Card insertion 1 Pick and place area direction 0,3 A 13 4,15 0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline 874195490357 5 Contact foot area 0 18,21,23,26,29,31, 51, 0,8 x 1 7 1, Pad SWSW 6) 14 1 C1C2C3C4 3,2 55, 3, ( 1,5 8.84 0,3 Card end travel XX XX F508T 1 switch terminals 0 5,3 3,81 27,5 0,8 x 1 2 8 (50) (38,5) 3, 10 1,5 C5C6C7C8 20 2,05 1,310x0,2 2x 0,1 3,2+ 00,1 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm 4 dec 18 Specifications and dimensions subject to change www.ckwitches.com     18

CCM02 MK2 Series CCM02-F844A LFT / CCM02-F844B LFT 2 90,2±0,1 DETAIL B Scale 5 58±0,3 8 0, 0,7 2,05 ECmhabnonsesled 0,95 4,3±0,2 +0,43,2-0,2 0,8 e z i S 0,2±0,15 (14x) 1 l 0,3 A 06-0,1 2 ul 18,87 (5x) 2,54 1, F metal peg(4x) 1,62±0,05 A-A 51,5 0.2 A B 6 A A SEE DETAIL B B14 6,35±0,3 15,7 1±0,25 2 6 n) o Labelling : Designation & 10 siti Date-Code arFe8a4 4T 20 16,9ed po s xx xx o cl Contacts security ( (closed position) A 45° 3,6±0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) Contact foot area C5 C6 C7 C8 715937 5 849405 m e(4taxl)li zed1 h,9oles 0 10, 11,3 18,21,23,26,29,31, 3838,8 Card end travel P2 P4 0,1 A switch terminals (Piracy P1 P3 SWSW 1,7 C1C2C3C4 switch) 14 3,1 1 3,8 1,5 5 6 1,27 2, 1 0 P2 3,81 P4 Cdiarerdc tiinosnertion )8 1,27 P1 81 P3 (5 (6x) 1,3 0,05 11,451,5 C5C6C7C8 3, (60x,0) 51,5 xx xxF844T Protection cover terminals 2 Plastic 20 3,24 1,3 outline (50) (40,5) 0,2 Contact location according to ISO/IEC 7816-2 0 7 2 5 9, Ppalesatsee o dno tnh'et saep 4p lpy aadnsy solder 37, 51, Dimensions are shown in mm 4 dec 18 Specifications and dimensions subject to change www.ckwitches.com     19