DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R 6.3 V TO 50 V 100 pF to 22 µF RoHS compliant & Halogen Free 8 1 V. 7 1 0 2 6, 1 e n u J – n o ti a c cifi e p S t c u d o r P

Product specification 2 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP This specification describes X7R CTC & 12NC series chip capacitors with lead- All part numbers are identified by the series, size, tolerance, TC material, free terminat ions. packing style, voltage, process code, termination and capacitance value. YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee APPLICATIONS GLOBAL PART NUMBER (PREFERRED)  PCs, Hard disk, Game PCs  DVDs, Video cameras CC XXXX X X X7R X BB XXX  Mobile phones (1) (2) (3) (4) (5)  Data processing (1) SIZE – INCH BASED (METRIC) 0201 (0603) FEATURES 0402 (1005)  Supplied in tape on reel 0603 (1608)  Nickel-barrier end termination 0805 (2012)  RoHS compliant 1206 (3216)  Halogen Free compliant 1210 (3225) 1812 (4532) (2) TOLERANCE J = ±5% (1) K = ±10% M = ±20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch (4) RATED VOLTAGE 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF NOTE 1. Tolerance ±5% is not available for full product range, please contact local sales force before ordering www.yageo.com June 16, 2017 V.18

Product specification 3 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in w hich a number of interleaved m etal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is Fig. 1 Surface mounted multilayer cerami c capacitor construction shown in Fig.1. DIMENSION Table 1 For outlines see fig. 2 OOUUTTLLIINNEESS T Y PE L (mm) W (mm) T (MM) L2 / L3 (mm) L4 (mm) DIMENSION 1 min. Max. min. CODE For dimension see Table 1 0 201 0.6 ±0.03 0.3 ±0.03 0.3 ±0.03 0.1 0.2 0.2 BA 0402 1.0 ±0.05 0.5 ±0.05 0.5 ±0.05 0.15 0.35 0.4 CA 1.6 ±0.1 0.8 ±0.1 0.8 ±0.1 0.2 0.6 0.4 DA 0 603 1.6 ±0.15 0.8 ±0.15 0.8 ±0.15 0.2 0.6 0.4 DB 1.6 ±0.2 0.8 ±0.2 0.8 ±0.2 0.2 0.6 0.4 DC 2.0 ±0.1 1.25 ±0.1 0.6 ±0.1 0.25 0.75 0.7 E0 0 805 2.0 ±0.1 1.25 ±0.1 0.85 ±0.1 0.25 0.75 0.7 EA 2.0 ±0.2 1.25 ±0.2 1.25 ±0.2 0.25 0.75 0.7 EB 3.2 ±0.15 1.6 ±0.15 0.85 ±0.1 0.25 0.75 1.4 F0 Fig. 2 Surface mo unted multilayer 3.2 ±0.2 1.6 ±0.2 1.0 ±0.1 0.25 0.75 1.4 F1 ceramic ca pacitor dimension 1 206 3.2 ±0.2 1.6 ±0.2 1.15 ±0.1 0.25 0.75 1.4 FA 3.2 ±0.3 1.6 ±0.2 1.6 ±0.2 0.25 0.8 1.4 FC 3.2 ±0.3 1.6 ±0.3 1.6 ±0.3 0.3 0.9 1.4 FD 3.2 ±0.2 2.5 ±0.2 0.85 ±0.1 0.25 0.75 1.4 G0 3.2 ±0.4 2.5 ±0.3 1.15 ±0.1 0.25 0.75 1.4 G1 3.2 ±0.4 2.5 ±0.3 1.25 ±0.2 0.25 0.75 1.4 GA 3.2 ±0.4 2.5 ±0.3 1.6 ±0.2 0.25 0.75 1.4 G2 1210 3.2 ±0.4 2.5 ±0.3 1.9 ±0.2 0.25 0.75 1.4 GB 3.2 ±0.4 2.5 ±0.3 2.0 ±0.2 0.25 0.75 1.4 G3 3.2 ±0.4 2.5 ±0.3 2.5 ±0.2 0.25 0.75 1.0 GC 3.2 ±0.4 2.5 ±0.3 2.5 ±0.3 0.25 0.75 1.0 GD 4.5 ±0.2 3.2 ±0.2 0.85 ±0.1 0.25 0.75 2.2 JA 1812 4.5 ±0.2 3.2 ±0.2 1.15 ±0.1 0.25 0.75 2.2 JB 4.5 ±0.4 3.2 ±0.4 1.6 ±0.2 0.25 0.75 2.2 JC www.yageo.com June 16, 2017 V.18

Product specification 4 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 CAPACITANCE RANGE & THICKNESS FOR X7R Table 2 Sizes from 0201 to 0402 CAP. 0201 0402 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V 100 pF BA BA BA BA BA CA CA CA CA CA 150 pF BA BA BA BA BA CA CA CA CA CA 220 pF BA BA BA BA BA CA CA CA CA CA 330 pF BA BA BA BA BA CA CA CA CA CA 470 pF BA BA BA BA BA CA CA CA CA CA 680 pF BA BA BA BA BA CA CA CA CA CA 1.0 nF BA BA BA BA BA CA CA CA CA CA 1.5 nF BA BA BA BA CA CA CA CA CA 2.2 nF BA BA BA BA CA CA CA CA CA 3.3 nF BA BA BA BA CA CA CA CA CA 4.7 nF BA BA BA BA CA CA CA CA CA 6.8 nF BA BA BA BA CA CA CA CA CA 10 nF BA BA BA BA CA CA CA CA CA 15 nF CA CA CA CA CA 22 nF CA CA CA CA CA 33 nF CA CA CA CA CA 47 nF CA CA CA CA CA 68 nF CA CA CA CA 100 nF BA CA CA CA CA CA 150 nF 220 nF CA CA CA 330 nF 470 nF CA CA 680 nF 1.0 µF CA 2.2 µF 4.7 µF 10 µF 22 µF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering www.yageo.com June 16, 2017 V.18

Product specification 5 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 CAPACITANCE RANGE & THICKNESS FOR X7R Table 3 Sizes from 0603 to 0805 CAP. 0603 0805 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V 100 pF DA DA DA DA DA 150 pF DA DA DA DA DA 220 pF DA DA DA DA DA E0 E0 E0 E0 E0 330 pF DA DA DA DA DA E0 E0 E0 E0 E0 470 pF DA DA DA DA DA E0 E0 E0 E0 E0 680 pF DA DA DA DA DA E0 E0 E0 E0 E0 1.0 nF DA DA DA DA DA E0 E0 E0 E0 E0 1.5 nF DA DA DA DA DA E0 E0 E0 E0 E0 2.2 nF DA DA DA DA DA E0 E0 E0 E0 E0 3.3 nF DA DA DA DA DA E0 E0 E0 E0 E0 4.7 nF DA DA DA DA DA E0 E0 E0 E0 E0 6.8 nF DA DA DA DA DA E0 E0 E0 E0 E0 10 nF DA DA DA DA DA E0 E0 E0 E0 E0 15 nF DA DA DA DA DA E0 E0 E0 E0 E0 22 nF DA DA DA DA DA E0 E0 E0 E0 E0 33 nF DA DA DA DA DA EA EA EA EA EA 47 nF DA DA DA DA DA EA EA EA EA EA 68 nF DA DA DA DA DA EA EA EA EA EA 100 nF DA DA DA DA DA EA EA EA EA EA 150 nF DA DA DA DA DA EA EA EA EA EA 220 nF DA DA DA DA DA EA EA EA EA EB 330 nF DA DA DA DA EB EB EB EB EB 470 nF DA DA DA DA DA EB EB EB EB EB 680 nF DA DA DA DA EB EB EB EB EB 1.0 µF DA DA DA DA DB EB EB EB EB EB 2.2 µF DA DA DC EB EB EB EB EB 4.7 µF DC EB EB EB EB 10 µF EB EB EB 22 µF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering www.yageo.com June 16, 2017 V.18

Product specification 6 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 C APACITANCE RANGE & THICKNESS FOR X7R Table 4 Size 1206 CAP. 1206 6.3 V 10 V 16 V 25 V 50 V 100 pF 150 pF 220 pF F0 F0 F0 F0 F0 330 pF F0 F0 F0 F0 F0 470 pF F0 F0 F0 F0 F0 680 pF F0 F0 F0 F0 F0 1.0 nF F0 F0 F0 F0 F0 1.5 nF F0 F0 F0 F0 F0 2.2 nF F0 F0 F0 F0 F0 3.3 nF F0 F0 F0 F0 F0 4.7 nF F0 F0 F0 F0 F0 6.8 nF F0 F0 F0 F0 F0 10 nF F0 F0 F0 F0 F0 15 nF F0 F0 F0 F0 F0 22 nF F0 F0 F0 F0 F0 33 nF F0 F0 F0 F0 F0 47 nF F0 F0 F0 F0 F0 68 nF F0 F0 F0 F0 F0 100 nF F0 F0 F0 F0 F0 150 nF F0 F0 F0 F0 FA 220 nF F0 F0 F0 F0 FA 330 nF F0 F0 F0 F0 F0 470 nF F0 F0 F0 F0 F1 680 nF FA FA FA FA FC 1.0 µF FA FA FA FA FC 2.2 µF FA FA FA FA FC 4.7 µF FC FC FC FC FC 10 µF FC FC FC FC 22 µF FC FC FD 47 µF N OTE 1 . Values in shaded cells indicate thickness class in mm 2 . Capacitance value of non E-6 series is on request 3 . For product with 5% tolerance, please contact local sales force before ordering 4. Please contact local sales force for special ordering code before ordering www.yageo.com June 16, 2017 V.18

Product specification 7 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 CAPACITANCE RANGE & THICKNESS FOR X7R Table 5 Sizes from 1210 to 1812 CAP. 1210 1812 6.3 V 10 V 16 V 25 V 50 V 50 V 100 pF 150 pF 220 pF 330 pF 470 pF 680 pF 1.0 nF 1.5 nF 2.2 nF G0 G0 G0 G0 G0 3.3 nF G0 G0 G0 G0 G0 4.7 nF G0 G0 G0 G0 G0 JA 6.8 nF G0 G0 G0 G0 G0 JA 10 nF G0 G0 G0 G0 G0 JA 15 nF G0 G0 G0 G0 G0 JA 22 nF G0 G0 G0 G0 G0 JA 33 nF G0 G0 G0 G0 G0 JA 47 nF G0 G0 G0 G0 G0 JA 68 nF G0 G0 G0 G0 G0 JA 100 nF G0 G0 G0 G0 G0 JB 150 nF G0 G0 G0 G0 G1 JB 220 nF G0 G0 G0 G0 G1 JB 330 nF G0 G0 G0 G0 G1 JB 470 nF G1 G1 G1 G1 GA JB 680 nF G1 G1 G1 G1 GA JC 1.0 µF GA GA GA GA GA JC 2.2 µF G3 G3 G3 G3 G3 4.7 µF GB GB GB GB GD 10 µF GB GB GB GB GD 22 µF GC GC GC GC 47 µF GC GC NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering 4. Please contact local sales force for special ordering code before ordering www.yageo.com June 16, 2017 V.18

Product specification 8 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 THICKNESS CLASSES AND PACKING QUANTITY Table 6 SIZ E THICKNESS TAPE WIDTH Ø180 MM / 7 INCH Ø 330 MM / 13 INCH QUANTITY Paper Blister Paper Blister CODE CLASSIFICATION QUANTITY PER REEL PER BULK CASE 0201 0.3 ±0.03 mm 8 mm 15,000 --- 50,000 --- --- 0402 0.5 ±0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0603 0.8 ±0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- 10,000 0805 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 5,000 0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- --- 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- --- 1.00 / 1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 --- 1206 1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 --- 1.6 ±0.15 mm 8 mm --- 2,500 --- 10,000 --- 1.6 ±0.2 mm 8 mm --- 2,000 --- 8,000 --- 0.6 / 0.7 ±0.1 mm 8 mm --- 4,000 --- 15,000 --- 0.85 ±0.1 mm 8 mm --- 4,000 --- 10,000 --- 1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.15 ±0.15 mm 8 mm --- 3,000 --- 10,000 --- 1.25 ±0.2 mm 8 mm --- 3,000 --- --- --- 1210 1.5 ±0.1 mm 8 mm --- 2,000 --- --- --- 1.6 / 1.9 ±0.2 mm 8 mm --- 2,000 --- --- --- 2,000 2.0 ±0.2 mm 8 mm --- --- --- --- 1,000 1,000 2.5 ±0.2 mm 8 mm --- --- --- --- 500 1.15 ±0.15 mm 12 mm --- 3,000 --- --- --- 1.25 ±0.2 mm 12 mm --- 3,000 --- --- --- 1.35 ±0.15 mm 12 mm --- 2,000 --- --- --- 1808 1.5 ±0.1 mm 12 mm --- 2,000 --- --- --- 1.6 ±0.2 mm 12 mm --- 2,000 --- 8,000 --- 2.0 ±0.2 mm 12 mm --- 2,000 --- --- --- 0.6 / 0.85 ±0.1 mm 12 mm --- 2,000 --- --- --- 1.15 ±0.1 mm 12 mm --- 1,000 --- --- --- 1.25 ±0.2 mm 12 mm --- 1,000 --- --- --- 1812 1.5 ±0.1 mm 12 mm --- 1,000 --- --- --- 1.6 ±0.2 mm 12 mm --- 1,000 --- --- --- 2.0 ±0.2 mm 12 mm --- 1,000 --- --- --- 2.5 ±0.2 mm 12 mm --- 500 --- --- --- www.yageo.com June 16, 2017 V.18

Product specification 9 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 ELECTRICAL CHARACTERISTICS XX77RR DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC 60068-1: - Temperature: 15 °C to 35 °C - Relative humidity: 25% to 75% - Air pressure: 86 kPa to 106 kPa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capacitor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose. Table 7 DESCRIPTION VALUE Capacitance range 100 pF to 47 µF Capacitance tolerance ±5%, ±10%, ±20% Dissipation factor (D.F.) X7R 0201 0402 0603 0805 1206 1210 ≤10V 100pF to 10nF 100pF to 100nF 100pF to 1µF 150pF to 2.2µF 220pF to 2.2µF 2.2nF to 2.2µF ≤5% 100nF 2 20nF to 470nF 2.2µF to 4.7µF 4.7µF to 10µF 4.7µF to 22µF 4.7µF to 47µF ≤10% 1µF ≤12.5% 16V 100pF to 1.2nF 100pF to 22nF 100pF to 220nF 150pF to 470nF 220pF to 1µF 2.2nF to 1µF ≤ 3.5% 1.5nF to 10nF 27nF to 100nF 470nF to 1.0µF 680 nF to 2.2µF 2.2µF 2.2µF ≤ 5% 220nF 2.2µF 4.7µF to 10µF 4.7µF to 22µF 4.7µF to 22µF ≤10% 25V 100pF to 470pF 100pF to 10nF 100pF to 39nF 150pF to 180nF 220pF to 680nF 2.2nF to 1µF ≤ 2.5% 12 nF to 47nF 47nF to 220nF 220nF to 470nF 1µF ≤ 3.5% 560pF to 10nF 56nF to 100nF 680nF to 1µF 2.2µF 2.2µF ≤ 5% 270nF to 1µF 2.2µF to 4.7µF 4.7µF to 22µF 4.7µF to 22µF ≤10% 50V 100pF to 1nF 100pF to 10nF 100pF to 39nF 150pF to 180nF 220pF to 470nF 2.2nF to 1µF ≤2.5% 12 nF to 47nF 47nF to 220nF 220nF to 470nF 680nF to 1µF ≤ 3.5% 680nF ≤ 5% 100nF 470nF to 1µF 1µF to 2.2µF 2.2µF to 4.7µF 2.2µF to 10µF ≤10% Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × Cr ≥ 500/100/50* seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): ±15% Operating temperature range: –55 °C to +125 °C NOTE * Rins ≥ 10 GΩ or Rins × Cr ≥ 500Ω.F: * Rins × Cr ≥ 100Ω.F: * Rins × Cr ≥ 50Ω.F: 0201 : 100pF to 10nF 0201 : 100nF/6.3V 0402 : 1uF/6.3V 0402 : 100pF to 220nF 0402 : 470nF/6.3V to 10V 0603 : 4.7uF/6.3V 0603 : 100pF to 1uF 0603 : 2.2uF/6.3V to 16V 0805 : 220pF to 1uF, 2.2uF/6.3V to 16V 0805 : 2.2uF/25V to 50V, 4.7uF/6.3V to 25V 1206/1210 : 220pF to 1uF, 2.2uF/6.3V to 25V, 10uF/6.3V to 16V 4.7uF/6.3V to 16V 1206 : 2.2uF/50V, 4.7uF/25V to 50V, 10uF/6.3V to 25V, 1812 : 4.7nF to 1uF 22uF/6.3V to 16V 1210 : 2.2uF/50V, 4.7uF/25V to 50V, 10uF/6.3V to 50V, 22uF/6.3V to 16V, 47uF/6.3V to 10V www.yageo.com June 16, 2017 V.18

Product specification 10 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20  Fig. 3 Typical capacitance change as a function of temperature www.yageo.com June 16, 2017 V.18

Product specification 11 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 Size 0201 10 nF / 16 V Solid lines: Impedance / Dotted lines: ESR Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0402 100 nF / 16 V Solid lines: Impedance / Dotted lines: ESR Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com June 16, 2017 V.18

Product specification 12 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 Size 0603 1 µF / 1 6 V Solid lines: Impedance / Dotted lines: ESR Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0805 1 µF / 16 V Solid lines: Impedance / Dotted lines: ESR Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com June 16, 2017 V.18

Product specification 13 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 Size 1206 1 µF / 2 5 V Solid lines: Impedance / Dotted lines: ESR Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1206 10 µF / 10 V Solid lines: Impedance / Dotted lines: ESR Fig. 9 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com June 16, 2017 V.18

Product specification 14 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 SOLDERING RECOMMENDATION Table 8 SOLDERING SIZE MET HOD 0201 0402 0603 0805 1206 ≥ 1210 Reflow Reflow only > 100 nF > 1 µF > 2.2 µF > 4.7 µF Reflow only Reflow/Wave ≤ 100 nF ≤ 1 µF ≤ 2.2 µF ≤ 4.7 µF --- TESTS AND REQUIREMENTS Table 9 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384- 4.3 The capacitors may be mounted on printed-circuit boards or No visible damage 21/22 ceramic substrates Visual Inspection 4.4 Any applicable method using × 10 magnification In accordance with and Dimension specification Check Capacitance (1) 4.5.1 Class 2: Within specified tolerance Dissipation 4.5.2 At 20 °C, 24 hrs after annealing Factor (D.F.) (1) Cap ≤ 1 µF, f = 1 KHz, measuring at voltage 1 Vrms at 20 °C Cap > 1 µF, f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C Insulation 4.5.3 At U (DC) for 1 minute In accordance with r Resistance specification NOTE: 1. For individual product specification, please contact local sales. www.yageo.com June 16, 2017 V.18

Product specification 15 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature IEC 60384- 4.6 Capacitance shall be measured by the steps shown in the <General purpose series> Characteristic 21/22 following table. Class1: ∆ C/C: ±30ppm The capacitance change should be measured after 5 min at each specified temperature stage. Class2: X7R: ∆ C/C: ±15% Step Temperature(℃) Y5V: ∆ C/C: 22~-82% a 25±2 <High Capacitance series> b Lower temperature±3℃ Class2: c 25±2 X7R/X5R: ∆ C/C: ±15% Y5V: ∆ C/C: 22~-82% d Upper Temperature±2℃ e 25±2 (1) Class I Temperature Coefficient shall be calculated from the formula as below C2-C1 Temp, Coefficient = 106 [ppm/℃] C1 xΔT C1: Capacitance at step c C2: Capacitance at 125℃ ∆T: 100℃(=125℃-25℃) (2) Class II Capacitance Change shall be calculated from the formula as below C2-C1 ∆C = x 100% C1 C1: Capacitance at step c C2: Capacitance at step b or d Adhesion 4.7 A force applied for 10 seconds to the line joining the Force terminations and in a plane parallel to the substrate size ≥ 0603: 5N size = 0402: 2.5N size = 0201: 1N www.yageo.com June 16, 2017 V.18

Product specification 16 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 TEST TEST METHOD PROCEDURE REQUIREMENTS Bond Strength 4.8 Mounting in accordance with IEC 60384-22 No visible damage paragraph 4.3 Conditions: bending 1 mm at a rate of 1 mm/s, ∆C/C radius jig 5 mm Class2: <General purpose series> X7R: ±10% <High Capacitance series> Test Substrate: X7R: ±12.5% b 4.5 YNSC147 Dimension(mm) Type a b c 0201 0.3 0.9 0.3 C 40 0402 0.4 1.5 0.5 a 0603 1.0 3.0 1.2 100 0805 1.2 4.0 1.65 unit:mm 1206 2.2 5.0 1.65 1210 2.2 5.0 2.0 1808 3.5 7.0 3.7 Resistance to 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep Dissolution of the end face plating shall not Soldering Heat for 24 ±1 hours at room temperature exceed 25% of the length of the edge Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 concerned minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute ∆C/C Solder bath temperature: 260 ±5 °C Class2: X7R: ±10% Dipping time: 10 ±0.5 seconds Recovery time: 24 ±2 hours D.F. within initial specified value R within initial specified value ins www.yageo.com June 16, 2017 V.18

Product specification 17 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability IEC 60384- 4.10 Preheated to a temperature of 80 °C to 140 °C and The solder should cover over 95% of the 21/22 maintained for 30 seconds to 60 seconds. critical area of each termination 1. Temperature: 235±5°C / Dipping time: 2 ±0.5 s 2. Temperature: 245±5°C / Dipping time: 3 ±0.5 s (lead free) Depth of immersion: 10mm Rapid Change of 4.11 Preconditioning; No visual damage Temperature 150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature ∆C/C 5 cycles with following detail: Class2: 30 minutes at lower category temperature X7R: ±15% 30 minutes at upper category temperature Recovery time 24 ±2 hours D.F. meet initial specified value R meet initial specified value ins www.yageo.com June 16, 2017 V.18

Product specification 18 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 TEST TEST METHOD PROCEDURE REQUIREMENTS Damp Heat IEC 60384- 4.13 1. Preconditioning, class 2 only: No visual damage after recovery with Ur Load 21/22 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp <General Purpose series> 2. Initial measure: ∆C/C Spec: refer to initial spec C, D, IR Class2: 3. Damp heat test: X7R: ±15% 500 ±12 hours at 40 ±2 °C; D.F. 90 to 95% R.H. 1.0 U applied r Class2: 4. Recovery: X7R: ≤ 16V: ≤ 7% Class 2: 24 ±2 hours ≥ 25V: ≤ 5% 5. Final measure: C, D, IR R ins Class2: P.S. If the capacitance value is less than the X7R: ≥ 500 MΩ or R x C ≥ 25s ins r minimum value permitted, then after the other whichever is less measurements have been made the capacitor shall be preconditioned according to “IEC 60384 <High Capacitance series(≥ 1uF) and 4.1” and then the requirement shall be met. CC0402xRX7R9BB104> ∆C/C Class2: X7R: ±20% D.F. Class2: X7R: 2 x initial value max R ins Class2: X7R: 500 MΩ or R x C ≥ 5s ins r whichever is less www.yageo.com June 16, 2017 V.18

Product specification 19 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC 60384- 4.14 1. Preconditioning, class 2 only: No visual damage 21/22 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp <General Purpose series> 2. Initial measure: ∆C/C Spec: refer to initial spec C, D, IR Class2: 3. Endurance test: X7R: ±15% Temperature: X7R: 125 °C D.F. Specified stress voltage applied for 1,000 hours: Class2: Applied 2.0 x U for general products* r X7R: ≤ 16V: ≤ 7% Applied 1.5 x U for high cap. Products* r ≥ 25V: ≤ 5% 4. Recovery time: 24 ±2 hours R ins 5. Final measure: C, D, IR Class2: X7R: ≥ 1,000 MΩ or R x C ≥ 50s ins r P.S. If the capacitance value is less than the minimum whichever is less value permitted, then after the other measurements have been made the capacitor shall be preconditioned <High Capacitance series> according to “IEC 60384 4.1” and then the ∆C/C requirement shall be met. Class 2: X7R: ±20% * General product (Applied 2.0 x Ur): D.F. 0201 ≤ 10nF Class 2: 0402 ≤ 100nF X7R: 2 x initial value max 0603 ≤ 470nF 0805, 1206, 1210 ≤ 1uF; Rins * High cap product (Applied 1.5 x Ur): Class 2: 0201 > 10nF X7R: 1,000 MΩ or Rins x Cr ≥ 10s 0402 > 100nF whichever is less 0603 > 470nF 0805, 1206, 1210 > 1uF; Voltage Proof IEC 60384- 4.6 Specified stress voltage applied for 1~5 seconds No breakdown or flashover 1 Ur ≤ 100 V: series applied 2.5 Ur Charge/Discharge current is less than 50 mA www.yageo.com June 16, 2017 V.18

Product specification 20 Surface-Mount Ceramic Multilayer Capacitors General Purpose & High Cap. X7R 6.3 V to 50 V 20 REVISION HI STORY REVISION D ATE CHANGE NOTIFICATION DESCRIPTION Version 18 M ay. 11th, 2017 - Add 1210/10uF/50V Version 17 Mar. 7th, 2017 - - 0805 L4 spec updated - Dimension updated Version 16 Dec. 7th, 2016 - - Dimension updated Version 15 Oct. 3rd, 2016 - - Dimension updated, Soldering recommendation updated Version 14 May 31st, 2016 - - Dimension updated Version 13 Dec. 30, 2015 - - Dimension on 0603 and 1206 case size updated Version 12 May 26, 2015 - - 1210, 25V dissipation factor updated Version 11 Jan. 06, 2015 - - 0402, 100nF, 50V Dissipation factor (D.F.) updated. Version 10 Jul. 08, 2014 - - Dimension updated Version 9 Aug. 19, 2013 - - Dimension updated Version 8 Oct. 13, 2011 - - Dimension updated - 50V Dissipation factor(D.F) updated Version 7 Jan. 13, 2011 - - Dimension updated Version 6 Oct. 13, 2010 - - Rated voltage of 0201 extend to 50 V - Capacitance range of 0201 X7R 6.3V to 16V extend to 100 pF - Capacitance range of 0805 X7R 10V extend to 10 µF - Capacitance range of 0805 X7R 50V extend to 1 µF - Capacitance range of 1210 X7R 10V extend to 22 µF - Figures of impedance ESR updated Version 5 Jul 27, 2010 - - Dimension on 0603 and 1206 case size updated - 16V to 25V Dissipation factor(D.F) updated Version 4 Apr 21, 2010 - - The statement of "Halogen Free" on the cover added - Dimension updated Version 3 Oct 26, 2009 - - Capacitance range of 0402 X7R 25 V extend to 100 nF - 16V Dissipation factor updated Version 2 May 11, 2009 - - Product range updated Version 1 Apr 24, 2009 - - Ordering code updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X7R series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: X7R_10V_9, X7R_16V-to- 100V_9, X7R_16-to-500V_9, UP-X5R_X7R_HighCaps_6.3-to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated www.yageo.com June 16, 2017 V.18