Film Chip Capacitors PET-HT DIELECTRIC – CB Series GENERAL DESCRIPTION Film chip capacitor using a naked and stacked construction with metallized High Temperature PET (polyethylene terephtalate). ADVANTAGES • Use of high temperature dielectric films makes these capacitors suitable for IR or vapor phase reflow processes. This chip is built without specific encapsulation. • The intrinsic elasticity of the dielectric film allows an excellent compatibility of the capacitor with all types of material for printed circuit boards. • The self-healing property of film technology results to a safety open failure mode and better overall reliability. • Excellent thermal shock resistance. APPLICATIONS • Low dissipation factor ESR & ESL. General purpose function in low voltage applications where • No piezoelectric effect. miniaturization and SMD is required. Typical applications • Available in tape and reel suitable for automatic placement. would be: • Non-polar construction. • Automotive (Airbag, Fuel injection calculator...) • Telecom (Public switching systems, modems, telephone set, cordless, mobile) Outer Layer • Industrial (SMPS, Power convertor module...) Termination Plating : 100% matte Sn Ni Barrier Under Termination Silver Epoxy Resin Brass Active Layers : PET dielectric PERFORMANCE CHARACTERISTICS Climatic Category 55/125/56 Capacitance Range 10nF to 4.7μF Tolerance on C ±5%, ±10% R Nominal Voltages 63Vdc to 630Vdc Test Voltage 1.4Vr 2 sec. at 25°C Soldering methods IR or vapor phase reflow (not suitable for wave soldering) Tangent of Loss Angle at 1kHz (DF) < 100 x 10-4 Insulation resistance minimum : IR for C ≤ 0.33μF IR > 1000 MΩ at 20°C for 1 min. charge at 10Vdc for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc for C > 0.33μF IR C > 400 sec. at 20°C for 1 min. charge at 10Vdc for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc Temperature range -55°C to 125°C with voltage derating of 1.25%/°C between 105°C and 125°C A.C. applications for high frequency A.C. application please check with AVX 10 120418

Film Chip Capacitors PET-HT DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 63V Vac: 40V Chip Dimensions Capacitance Reel Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Range Pkg Code (page 6) (CR) Code L W H max T W P1 K0 A W1 W2 max Bulk Reel 0.270μF CB042D0274+ -- 5.8 5.0 2.8 0.8 12.0 8.0 3.1 330 12.4 18.4 1500 3000 BC (0.228) (0.195) (0.110) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724) 0.330μF CB042D0334+ -- 5.80 5.00 3.30 0.80 12.0 8.00 3.45 330 12.4 18.4 1500 2800 BC (0.228) (0.195) (0.130) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724) 0.390 CB042D0394++ -- 5.80 5.00 3.40 0.80 12.0 8.00 3.45 330 12.4 18.4 1500 2800 BC (0.228) (0.195) (0.134) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724) 0.470 CB042D0474+ -- 5.80 5.00 3.50 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.138) (0.032) (0.472) (0.315) (0.162) (12.99) (0.488) (0.724) 0.560 CB042D0564+ -- 5.80 5.00 3.50 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.138) (0.032) (0.472) (0.315) (0.162) (12.99) (0.488) (0.724) 0.680 CB042D0684+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.162) (12.99) (0.488) (0.724) 0.820 CB052D0824+ -- 7.2 6.1 3.7 0.8 16.0 8.00 3.8 330 24.4 30.4 1000 2250 BC (0.283) (0.24) (0.146) (0.032) (0.629) (0.315) (0.149) (12.99) (0.96) (1.196) 1μF CB052D0105+ -- 7.2 6.1 3.7 0.8 16.0 8.00 3.8 330 24.4 30.4 1000 2250 BC (0.283) (0.24) (0.146) (0.032) (0.629) (0.315) (0.149) (12.99) (0.96) (1.196) 1.5 CB052D0155+ -- 7.20 6.10 5.30 0.80 16.0 12.0 5.50 330 16.4 22.4 1000 1000 BC (0.283) (0.240) (0.209) (0.032) (0.629) (0.472) (0.216) (12.99) (0.645) (0.881) 2.2 CB162D0225+ -- 10.5 7.6 5.8 0.8 24.0 12 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.229) (0.032) (0.944) (0.472) (0.244) (12.99) (0.96) (1.196) 3.3 CB172D0335+ -- 12.8 10.2 5.50 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC (0.503) (0.401) (0.216) (0.032) (0.944) (0.629) (0.224) (12.99) (0.961) (1.196) 4.7μF CB182D0475+ -- 15.3 13.7 4.90 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC (0.601) (0.539) (0.193) (0.032) (0.944) (0.944) (0.216) (12.99) (0.961) (1.196) VOLTAGE Vdc: 100V Vac: 63V 0.180μF CB042E0184+ -- 5.8 5.0 2.3 0.8 12.0 8.0 2.43 330 12.4 18.4 1500 3500 BC (0.228) (0.195) (0.091) (0.032) (0.472) (0.315) (0.096) (12.99) (0.488) (0.724) 0.220μF CB042E0224+ -- 5.80 5.00 3.30 0.80 12.0 8.00 3.45 330 12.4 18.4 1500 3000 BC (0.228) (0.195) (0.130) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724) 0.270μF CB042E0274 +-- 5.8 5.0 3.4 0.8 12.0 8.0 3.45 330 12.4 18.4 1500 2800 BC (0.228) (0.195) (0.134) (0.032) (0.472) (0.315) (0.136) (12.99) (0.488) (0.724) 0.330 CB042E0334+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.390 CB042E0394+ -- 5.80 5.00 3.90 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.154) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.470 CB042E0474+ -- 5.80 5.00 4.30 0.80 12.0 8.0 4.50 330 12.4 18.4 1500 1900 BC (0.228) (0.195) (0.169) (0.032) (0.472) (0.315) (0.177) (12.99) (0.488) (0.724) 0.560 CB052E0564+ -- 7.20 6.10 4.20 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC (0.283) (0.240) (0.165) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.680 CB052E0684+ -- 7.20 6.10 5.00 0.80 16.0 12.0 5.23 330 16.4 22.4 1000 1100 BC (0.283) (0.240) (0.197) (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881) 0.820 CB052E0824+ -- 7.20 6.10 4.70 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC (0.283) (0.240) (0.185) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 1μF CB052E0105+ -- 7.20 6.10 5.70 0.80 16.0 12.0 5.90 330 16.4 22.4 1000 900 BC (0.283) (0.240) (0.224) (0.032) (0.629) (0.472) (0.232) (12.99) (0.645) (0.881) 1.5 CB162E0155+ -- 10.5 7.60 6.10 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.240) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 120418 11

Film Chip Capacitors PET-HT DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 100V Vac: 63V Chip Dimensions Capacitance Reel Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Range Pkg Code (page 6) (CR) Code L W H max T W P1 K0 A W1 W2 max Bulk Reel 2.2 CB172E0225+ -- 12.8 10.2 5.50 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC (0.503) (0.401) (0.216) (0.032) (0.944) (0.629) (0.224) (12.99) (0.961) (1.196) 3.3 CB182E0335+ -- 15.3 13.7 5.20 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC (0.601) (0.539) (0.204) (0.032) (0.944) (0.944) (0.216) (12.99) (0.961) (1.196) 4.7μF CB182E0475+ -- 15.3 13.7 7.10 0.80 24.0 24.0 7.60 330 24.4 30.4 300 300 BC (0.601) (0.539) (0.279) (0.032) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196) VOLTAGE Vdc: 250V Vac: 160V 0.047μF CB042G0473+ -- 5.80 5.00 3.00 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 3000 BC (0.228) (0.195) (0.118) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724) 0.056 CB042G0563+ -- 5.80 5.00 3.60 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.142) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.068 CB042G0683+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.082 CB042G0823+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.1μF CB042G0104+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.448) (0.724) 0.120 CB052G0124+ -- 7.20 6.10 4.30 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC (0.283) (0.240) (0.169) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.150 CB052G0154+ -- 7.20 6.10 4.30 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC (0.283) (0.240) (0.169) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.180 CB052G0184+ -- 7.20 6.10 5.10 0.80 16.0 12.0 5.23 330 16.4 22.4 1000 1100 BC (0.283) (0.240) (0.200) (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881) 0.220 CB052G0224+ -- 7.20 6.10 4.90 0.80 16.0 12.0 5.23 330 16.4 22.4 1000 1100 BC (0.283) (0.240) (0.193) (0.032) (0.629) (0.472) (0.206) (12.99) (0.645) (0.881) 0.270 CB162G0274+ -- 10.5 7.60 4.80 0.80 24.0 12.0 6.19 330 24.4 30.4 500 1100 BC (0.413) (0.299) (0.189) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.330 CB162G0334+ -- 10.5 7.60 5.60 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.220) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.390 CB162G0394+ -- 10.5 7.60 5.40 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.213) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.470 CB162G0474+ -- 10.5 7.6 6.15 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.241) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.560 CB172G0564+ -- 12.8 10.2 5.60 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC (0.503) (0.402) (0.220) (0.032) (0.944) (0.629) (0.225) (12.99) (0.961) (1.196) 0.680 CB172G0684+ -- 12.8 10.2 6.50 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC (0.503) (0.402) (0.255) (0.032) (0.944) (0.629) (0.275) (12.99) (0.961) (1.196) 0.820 CB182G0824+ -- 15.3 13.7 5.10 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC (0.601) (0.539) (0.201) (0.032) (0.944) (0.944) (0.217) (12.99) (0.961) (1.196) 1μF CB182G0105+ -- 15.3 13.7 6.00 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC (0.601) (0.539) (0.236) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196) 1.5 CB182G0155+ -- 15.3 13.7 7.00 0.80 24.0 24.0 7.60 330 24.4 30.4 300 300 BC (0.601) (0.539) (0.276) (0.0315) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 12 120418

Film Chip Capacitors PET-HT DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 400V Vac: 200V Chip Dimensions Capacitance Reel Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Range Pkg Code (page 6) (CR) Code L W H max T W P1 K0 A W1 W2 max Bulk Reel 0.010μF CB042I0103+ -- 5.80 5.00 3.00 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 3000 BC (0.228) (0.195) (0.017) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724) 0.012 CB042I0123+ -- 5.80 5.00 2.40 0.80 12.0 8.00 2.43 330 12.4 18.4 1500 3500 BC (0.228) (0.195) (0.095) (0.032) (0.472) (0.315) (0.096) (12.99) (0.488) (0.724) 0.015 CB042I0153+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.018 CB052I0183+ -- 7.2 6.1 2.8 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC (0.283) (0.240) (0.110) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881) 0.022 CB052I0223+ -- 7.2 6.1 3.5 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC (0.283) (0.240) (0.138) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881) 0.027 CB052I0273+ -- 7.2 6.1 2.8 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC (0.283) (0.240) (0.110) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881) 0.033 CB052I0333+ -- 7.2 6.1 3.3 0.8 16.0 12 3.8 330 16.4 22.4 1000 2250 BC (0.283) (0.240) (0.130) (0.032) (0.629) (0.472) (0.150) (12.99) (0.645) (0.881) 0.047 CB052I0473+ -- 7.20 6.10 4.50 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC (0.283) (0.240) (0.177) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.056 CB162I0563+ -- 10.5 7.60 3.10 0.80 24.0 12.0 3.93 330 24.4 30.4 500 1400 BC (0.413) (0.299) (0.122) (0.032) (0.944) (0.472) (0.155) (12.99) (0.961) (1.196) 0.068 CB162I0683+ -- 10.5 7.60 3.60 0.80 24.0 12.0 3.93 330 24.4 30.4 500 1400 BC (0.413) (0.299) (0.141) (0.032) (0.944) (0.472) (0.155) (12.99) (0.961) (1.196) 0.082 CB162I0823+ -- 10.5 7.60 4.20 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.165) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.100μF CB162I0104+ -- 10.5 7.60 4.70 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.185) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.120 CB172I0124+ -- 12.8 10.2 3.90 0.80 24.0 16.0 4.00 330 24.4 30.4 300 1100 BC (0.503) (0.402) (0.154) (0.032) (0.944) (0.629) (0.157) (12.99) (0.961) (1.196) 0.150 CB172I0154+ -- 12.8 10.2 4.60 0.80 24.0 16.0 4.70 330 24.4 30.4 300 900 BC (0.503) (0.402) (0.181) (0.032) (0.944) (0.629) (0.185) (12.99) (0.961) (1.196) 0.180 CB172I0184+ -- 12.8 10.2 5.60 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC (0.503) (0.402) (0.220) (0.032) (0.944) (0.629) (0.274) (12.99) (0.961) (1.196) 0.220 CB172I0224+ -- 12.8 10.2 6.80 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC (0.503) (0.402) (0.265) (0.032) (0.944) (0.629) (0.274) (12.99) (0.961) (1.196) 0.270 CB172I0274+ -- 12.8 10.2 6.80 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC (0.503) (0.402) (0.265) (0.032) (0.944) (0.629) (0.274) (12.99) (0.961) (1.196) 0.330 CB182I0334+ -- 15.3 13.7 5.60 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC (0.601) (0.539) (0.220) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196) 0.470μF CB182I0474+ -- 15.3 13.7 6.20 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC (0.601) (0.539) (0.244) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196) VOLTAGE Vdc: 630V Vac: 250V 0.010μF CB042K0103+ -- 5.80 5.00 2.80 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 3000 BC (0.228) (0.195) (0.110) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724) 0.012 CB042K0123+ -- 5.80 5.00 3.30 0.80 12.0 8.00 3.10 330 12.4 18.4 1500 2800 BC (0.228) (0.195) (0.130) (0.032) (0.472) (0.315) (0.122) (12.99) (0.488) (0.724) 0.015 CB042K0153+ -- 5.80 5.00 4.00 0.80 12.0 8.00 4.10 330 12.4 18.4 1500 2300 BC (0.228) (0.195) (0.158) (0.032) (0.472) (0.315) (0.161) (12.99) (0.488) (0.724) 0.018 CB052K0183+ -- 5.80 6.10 2.80 0.80 24.0 12.0 3.80 330 24.4 30.4 1000 2250 BC (0.228) (0.240) (0.110) (0.032) (0.944) (0.472) (0.149) (12.99) (0.961) (1.196) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 120418 13

Film Chip Capacitors PET-HT DIELECTRIC – CB Series CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR) W H T millimeters (inches) L VOLTAGE Vdc: 630V Vac: 250V Chip Dimensions Capacitance Reel Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Range Pkg Code (page 6) (CR) Code L W H max T W P1 K0 A W1 W2 max Bulk Reel 0.022 CB052K0223+ -- 7.20 6.10 3.50 0.80 24.0 12.0 3.80 330 24.4 30.4 1000 2250 BC (0.283) (0.240) (0.138) (0.032) (0.944) (0.472) (0.149) (12.99) (0.961) (1.196) 0.027 CB052K0273+ -- 7.20 6.10 4.10 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1800 BC (0.283) (0.240) (0.161) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.033 CB052K0333+ -- 7.20 6.10 5.00 0.80 16.0 12.0 4.80 330 16.4 22.4 1000 1100 BC (0.283) (0.240) (0.197) (0.032) (0.629) (0.472) (0.189) (12.99) (0.645) (0.881) 0.047 CB162K0473+ -- 10.5 7.60 3.60 0.80 24.0 12.0 3.93 330 24.4 30.4 500 1400 BC (0.413) (0.299) (0.141) (0.032) (0.944) (0.472) (0.155) (12.99) (0.961) (1.196) 0.056 CB162K0563+ -- 10.5 7.60 4.30 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.169) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.068 CB162K0683+ -- 10.5 7.60 5.20 0.80 24.0 12.0 6.19 330 24.4 30.4 500 900 BC (0.413) (0.299) (0.205) (0.032) (0.944) (0.472) (0.244) (12.99) (0.961) (1.196) 0.082 CB172K0823+ -- 12.8 10.2 4.30 0.80 24.0 16.0 4.70 330 24.4 30.4 300 900 BC (0.503) (0.402) (0.169) (0.032) (0.944) (0.629) (0.185) (12.99) (0.961) (1.196) 0.100μF CB172K0104+ -- 12.8 10.2 5.00 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC (0.503) (0.402) (0.197) (0.032) (0.944) (0.629) (0.225) (12.99) (0.961) (1.196) 0.120 CB172K0124+ -- 12.8 10.2 5.60 0.80 24.0 16.0 5.70 330 24.4 30.4 300 700 BC (0.503) (0.402) (0.220) (0.032) (0.944) (0.629) (0.225) (12.99 ) (0.961) (1.196 ) 0.150 CB172K0154+ -- 12.8 10.2 6.90 0.80 24.0 16.0 7.00 330 24.4 30.4 300 600 BC (0.503) (0.402) (0.271) (0.032) (0.944) (0.629) (0.275) (12.99 ) (0.961) (1.196 ) 0.180 CB182K0184+ -- 15.3 13.7 5.00 0.80 24.0 24.0 5.50 330 24.4 30.4 300 500 BC (0.601) (0.539) (0.197) (0.032) (0.944) (0.944) (0.217) (12.99) (0.961) (1.196) 0.220 CB182K0224+ -- 15.3 13.7 5.80 0.80 24.0 24.0 6.30 330 24.4 30.4 300 400 BC (0.601) (0.539) (0.229) (0.032) (0.944) (0.944) (0.248) (12.99) (0.961) (1.196) 0.270μF CB182K0274+ -- 15.3 13.7 7.20 0.80 24.0 24.0 7.60 330 24.4 30.4 300 300 BC (0.601) (0.539) (0.284) (0.032) (0.944) (0.944) (0.299) (12.99) (0.961) (1.196) Replace the + by the tolerance code: J = 5% or K = 10% Replace the -- by the packaging suffix: -- = bulk BC = tape & reel 14 120418

Film Chip Capacitors PET-HT DIELECTRIC – CB Series MOUNTING AND SOLDERING RECOMMENDATIONS SOLDERING PROFILE The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT suitable for wave soldering. All temperature refer to topside of the package, measured on the package body surface. T Profile Feature 2220 to 2824 4030 to 6054 Pmax Ramp-Up (Tsmaxto Tp) 3°C / second max 3°C / second max T Ramp up P--- rTTTeeiemhmmeeapp t(eet srr aa m tt uui n rr eet o MM t s ia nm x a( T(x T) s s m m in a )x ) 1 8 0 12 s 50 e 00c°°.CC m a x 1 8 0 12 s50e00c°°.CC max erature (ºC) TTS S mmLainx tL Ramp Time maintained above mp ts down - Temperature (TL) 217°C 217°C Te - Time (tL) 60 sec. max 75 sec. max Peak temperature (Tp max) 240°C 245°C Customer Peak temperature (Tp) < 240ºC < 245ºC Time within 5°C of peak 10 sec. 10 sec. temperature (Tp -5ºC)* 0 30 60 90 120 150 180 210 240 270 300 330 Ramp-Down 6°C / sec. 6°C / sec. Time (sec onds) * Example : Tp= 238.5°C =>> tp= time between 238.5°C and 233.5°C (Tp-5°C) # Reflow soldering referring to JEDECStandard with some limitations # JEDEC J-Std 020C RECOMMENDED SOLDER PASTE THICKNESS For optimum solderability, the recommended soldering In case of hand soldering, the temperature of the soldering paste thickness: 2220 to 2824 :150 to 200μm iron should not be above 250°C. Special care must be taken 4030 to 6054 :200 to 300μm to avoid touching the capacitor body with the iron tip. C B PAD DIMENSIONS: millimeters (inches) Size Code Case Size A B C 04 2220 5.00 (0.195) 1.90 (0.075) 4.50 (0.178) 05 2824 6.00 (0.234) 2.50 (0.098) 5.70 (0.224) A 16 4030 7.50 (0.295) 3.00 (0.118) 8.00 (0.315) 17 5040 11.2 (0.441) 3.50 (0.137) 10.3 (0.406) 18 6064 14.6 (0.575) 3.60 (0.147) 12.6 (0.496) RECOMMENDED CLEANING OTHER CAUTIONS To clean flux from the PC board assembly, the recommended Flame retardancy:the dielectric film is not a flame retardant products are: ethanol, isopropyl alcohol, and deionized water material. wash. The cleaning products to avoid are: Toluene, Xylene, Environment: contact us when chips are used in humid or Trichloroethylene, Terpene Cleaner EC-7, surface active gas atmosphere and /or when using resin. agent. In case of using another solvent, please contact us. Recommended handling: do not use edged tools, so not to damage the capacitors. TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121 Stress Type Ref. Spec. Test Conditions Analysis Results -55°C +85(+10/-0)°C air Temperature cycling JESD22-A104 SEM x 1000 Pass 5 to 10 minutes soak 3 cycles/hour Ambient Temperature / 30+/-2°C - 60+/-3% RH -2000H SEM x 1000 Pass Humidity Storage High Temperature / 70+/-5°C - 93+3/-2% RH -1000H SEM x 1000 Pass Humidity Storage 120418 15

Film Chip Capacitors PET-HT DIELECTRIC – CB Series ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY ELECTRICAL CHARACTERISTICS FREQUENCY CHARACTERISTICS Capacitance Capacitance (cid:2)C/C 20°C (%) 10 4 (cid:2)C/C vs TEMPERATURE 8 3 6 2 4 1 2 0 0 -1 -2 -2 -4 -6 -3 -8 -4 -55˚C -30˚C -5˚C +20˚C +45˚C +70˚C +95˚C +120˚C -5 Temperature 0.1 1 10 100 1000 FREQUENCY (kHz) Dissipation Factor Dissipation Factor DF 20°C (10 - 4) 160 400 DDCF/C ( 1= k(tHemzp) evrsat uTrEe)MPERATURE 140 300 120 -40)100 200 1 80 F. ( D. 60 100 40 20 0 0.1 1 10 100 1000 0 FREQUENCY (kHz) -55˚C -30˚C -5˚C +20˚C +45˚C +70˚C +95˚C +120˚C Temperature Insulation Resistance Impedance Z (mOhm) 10000.0 1000.00 IR vs TEMPERATURE 100nF 1000.0 100.00 m) 100.0 h o 47 nF G. 100 nF R( 10.0 220 nF I 10.00 470 nF 1µF 1.0 4.7µF 0.1 1.00 -55˚C -30˚C -5˚C +20˚C +45˚C +70˚C +95˚C +120˚C 1.00 10.00 FREQUENCY (MHz) Temperature 16 120418

Film Chip Capacitors PET-HT DIELECTRIC – CB Series RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms (for size CB04 to CB18) 63Vdc / 40 Vac 63Vdc / 40 Vac 45 5 4.7µF 1.5µF 0.47µF 40 4.5 4.7µF 35 4 30 3.5 V rms (V) 11220505 I rms (A) 2.523 1.5µF 0.47µF 1.5 5 1 0 0.5 0.1 1 10 100 1000 10000 0 FREQUENCY (kHz) 0.1 1 10 100 1000 10000 FREQUENCY (kHz) 100 Vdc / 63 Vac 100 Vdc / 63 Vac 70 6.5 60 4.7µF 1.5µF 0.22µF 6 4.7µF 5.5 50 5 4.5 V) 40 4 V rms ( 30 ms (A) 3.53 1.5µF 20 I r 2.52 0.22µF 10 1.5 1 0 0.1 1 10 100 1000 10000 0.5 0 FREQUENCY (kHz) 0.1 1 10 100 1000 10000 FREQUENCY (kHz) 250 Vdc / 160 Vac 250 Vdc / 160 Vac 180 6 1µF 0.47µF 5.5 160 0.1µF 5 1µF 140 4.5 120 4 V rms (V) 1068000 I rms (A) 23..5523 0.47µF 0.1µF 40 1.5 20 1 0.5 0 0 0.1 1 10 100 1000 10000 0.1 1 10 100 1000 10000 FREQUENCY (kHz) FREQUENCY (kHz) 120418 17

Film Chip Capacitors PET-HT DIELECTRIC – CB Series RMS VOLTAGE AND CURRENT VERSUS FREQUENCY MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms (for size CB04 to CB18) 400 Vdc / 200 Vac 400 Vdc / 200 Vac 1 220 0.47µF 0.1µF 0.01µF 200 0.47µF 180 160 140 V rms (V) 11028000 I rms (A) 0.5 0.1µF 60 40 0.01µF 20 0 0 0.1 1 10 100 1000 10000 0.1 1 10 100 1000 10000 FREQUENCY (kHz) FREQUENCY (kHz) 630 Vdc / 250 Vac 630 Vdc / 250 Vac 280 1 0.27µF 0.1µF 0.01µF 260 240 0.27µF 220 200 180 ms (V) 111246000 ms (A) 0.5 0.1µF V r 100 I r 80 60 40 0.01µF 20 0 0 0.1 1 10 100 1000 10000 0.1 1 10 100 1000 10000 FREQUENCY (kHz) FREQUENCY (kHz) MAXIMUM PULSE RISE TIME (DV/DT) Voltage Range 63 100 250 400 630 Dv/dt max. 40 50 150 200 250 (V/µsec) 18 120418

Film Chip Capacitors PET-HT DIELECTRIC – CB Series – RoHS MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT): Hexavalent Mass / unit (g) Lead Mercury Cadmium PBB PBDE Chromium CB range 0 0 0 0 0 0 RoHS Limit (ppm) 1000 1000 100 1000 1000 1000 Pass/Fail Pass Pass Pass Pass Pass Pass This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC regarding ELV or End of Life Vehicle. ROHS / ELV STATUS LEAD-FREE STATUS / MOISTURE SENSITIVITY RANKING External Plating 100% Matte Sn as standard Pb Free Reflow Solder compliant, MSL = 3. Reflow soldering referring to Jedec Standard with some limitations. Additional JESD-97 data to be phased in MSL e3 termination. PRODUCT LABELING: PRODUCT TRACEABILITY: (For informational purposes only to be phased in on reel and Full internal material traceability by reference to unique lot container.) number marked on reel and external package. Pb Free: RoHS Compliant: 120418 19