Features NT MPLIA ■ RoHS compliant* O HS C ■ Convex and concave terminals *Ro ■ 2, 4 or 8 isolated elements available ■ Resistance tolerance ±1 % and ±5 % ■ Resistance range: 10 ohms to 1 megohm CAT/CAY 16 Series - Chip Resistor Arrays Specifi cations Requirement Characteristics Test Method Short Time Overload ±2 % +0.1 ohm Rated Voltage X 2.5, 5 seconds Soldering Heat ±2 % +0.1 ohm 260 °C ±5 °C, 10 seconds ±1 second 125 °C (30 minutes) - normal (15 minutes) Temperature Cycling (5) ±1 % + 0.1 ohm -55 °C (30 minutes) - normal (15 minutes) Moisture Load Life ±3 % +0.1 ohm 1000 hours Load Life ±3 % +0.1 ohm 1000 hours Characteristics How To Order CA Y 16 - 103 J 4 LF Characteristics CAT16/CAY16 Chip Arrays Number of Elements 2 (J2), 4 (F4, J4), 8 (F8, J8) Type • CAT16 = Concave Terminations Power Rating Per Resistor @ 70 °C 0.0625 W • CAY16 = Convex Terminations Resistance Code 0.250 W • For 1 % Tolerance: Package Power Rating @ 70 °C (0.125 W for J2) <100 ohms - “R” represents decimal point (example: 24R3 = 24.3 ohms) Temperature Coeffi cient of Resistance ±200 PPM/°C ≥100 ohms - First three digits are signifi cant, fourth digit represents Resistance Tolerance ±1 %, ±5 % number of zeros to follow (example: 8252 = 82.5k ohms) Resistance Range: E24 (J), E96 + E24 (F) 10 ohms - 1 megohm • For 5 % Tolerance: Zero-Ohm Jumper < 0.05 ohm <10 ohms - “R” represents decimal Max. Working Voltage 50 V (25 V for CAY16-J8) point (example: 4R7 = 4.7 ohms) ≥10 ohms - First two digits are signifi - Operating Temp. Range -55 °C - 125 °C cant, third digit represents number of zeros to follow (example: 474 = 470k ohms) Soldering Profi le for RoHS Compliant Chip Resistors and Arrays • 000 = Zero Ohm Jumper Resistance Tolerance 275 • J = ±5 % (2, 4, 8 resistor pkg. and for <1>Maximum of 20 seconds between 260 °C peak Zero Ohm Jumper) +255 °C and +260 °C < 1 > 255 °C • F = ±1 % (4 resistor pkg. and CAT16-F8) Resistors 225 • 2 = 2 Isolated Resistors 220 °C • 4 = 4 Isolated Resistors • 8 = 8 Isolated Resistors e (°C)175 190 °C s6e0c o- n9d0s T• eLrFm =in Taitnio-npslated (RoHS compliant) ur 150 °C Ramp Down erat 6 °C/second mp Packaging Size Te125 60 - 120 seconds J2 ..........0606 Package Size F4, J4 ....1206 Package Size 10 seconds minimum F8 ..........2406 Package Size for CAT16 75 J8 ..........2406 Package Size for CAT16; Ramp Up 1506 Package Size for CAY16 3 °C/second maximum For Standard Values Used in Capacitors, 25 0 50 100 150 200 250 300 Inductors, and Resistors, click here. Time (seconds) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.

CAT/CAY 16 Series - Chip Resistor Arrays Derating Curve Schematics %) CAT16-J2(cid:1) CAT16-F4, -J4(cid:1) CAY16-J2 CAY16-F4, -J4(cid:1) e ( 100 (cid:1) g a cent 80 R1 R2 R1 R2 R3 R4 per 60 n wer i 40 CAT16-F8, -J8(cid:1) o CAY16-J8(cid:1) d p 20 (cid:1) e Rat 0 -55 0 70 125 R1 R2 R3 R4 R5 R6 R7 R8 Ambient Temperature (˚C) Dimensions Model A A’ B C D E F 0.40 ± 0.15 3.20 ± 0.20 0.80 ± 0.10 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.15 CAT16-F4 — (.016 ± .006) (.126 ± .008) (.032 ± .004) (.063 ± .008) (.020 ± .004) (.012 ± .006) 0.40 ± 0.15 3.20 ± 0.20 0.80 ± 0.10 1.55 ± 0.25 0.50 ± 0.10 0.30 ± 0.20 CAT16-J4 — (.016 ± .006) (.126 ± .008) (.032 ± ± .004) (.061 ± .0098) (.020 ± .004) (.012 ± .008) CAY16-F4, -J4 0.50 ± 0.15 0.70 ± 0.10 3.20 ± 0.20 0.80 ± 0.05 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.20 (.002 ± .006) (.027 ± .004) (.126 ± .008) (.032 ± .002) (.063 ± .008) (.020 ± .004) (.012 ± .008) 0.40 ± 0.15 1.60 ± 0.15 0.80 ± 0.05 1.60 ± 0.15 0.60 ± 0.15 0.30 ± 0.20 CAT16-J2 — (.016 ± .006) (.063 ± .006) (.032 ± .002) (.063 ± .006) (.024 ± .006) (.012 ± .008) 0.60 ± 0.15 1.60 ± 0.15 0.76 ± 0.10 1.60 ± 0.15 0.45 +0.15/-0.10 0.30 ± 0.20 CAY16-J2 — (.024 ± .006) (.063 ± .006) (.030 ± .004) (.063 ± .006) (.018 +0.006/-0.004) (.012 ± .008) 0.40 ± 0.15 6.40 ± 0.20 0.80 ± 0.15 1.60 ± 0.20 0.60 ± 0.15 0.30 ± 0.20 CAT16-F8, -J8 — (.016 ± .006) (.252 ± .008) (.032 ± .006) (.063 ± .008) (.024 ± .006) (.012 ± .008) 0.30 ± 0.15 0.30 ± 0.15 3.80 ± 0.20 0.50 ± 0.05 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.15 CAY16-J8 (.012 ± .006) (.012 ± .006) (.15 ± .008) (.02 ± .002) (.063 ± .008) (.02 ± .004) (.012 ± .006) Confi gurations CAT16-F4, -J4 CAY16-F4, -J4 CAT16-J2 CAY16-J2 A A' A A A' F F F F D C C C C F B B B B E MM DIMENSIONS: CAT16-F8, -J8 CAY16-J8 (INCHES) A A' A F F D C C F B B E Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.

CAT/CAY 16 Series - Chip Resistor Arrays Land Patterns CAT16-F4, -J4, -F8, -J8 CAY16-F4, -J4, -J8 CAT16-J2 CAY16-J2 p p Solder Solder Solder Solder resist resist resist resist f Land f Land f Land f Land Chip Chip Chip Chip resistor resistor resistor resistor array array array array a a a a b p b p b b Model a b p f 0.7 to 0.9 0.4 to 0.45 0.80 2.2 to 2.6 CAT16-F4, -J4, -F8, -J8 (.028 to .035) (.016 to .0178) (.032) (.087 to .102) 0.7 to 0.9 0.4 to 0.45 0.80 2.4 to 2.8 CAY16-F4, -J4 (.028 to .035) (.016 to .0178) (.032) (.094 to .11) 0.7 to 0.9 0.3 to 0.35 0.50 2.0 to 2.2 CAY16-J8 (.028 to .035) (.012 to .014) (.020) (.079 to .087) 0.7 to 0.9 0.4 to 0.45 0.80 2.2 to 2.6 CAT16-J2 (.028 to .035) (.016 to .0178) (.032) (.087 to .102) 0.7 to 0.9 0.4 to 0.5 0.80 2.0 to 2.6 CAY16-J2 (.028 to .035) (.016 to .020) (.032) (.079 to .102) Packaging Dimensions 1.0 MAX. 1.5 + 0.1 - 0 4.0 ± 0.1 2.0 ± 0.5 (.039) (.059 + .004 - 0) (.158 ± .004) (.079 ± .020) 13.0 ± 0.5 (.511 ± .020) b c 60 (2.362) a D IMENSIONS: (INMCHMES) (.028. 0+ +.0 00.41//--.00.028) (.145.70 ±± .00.014) 180 (.82217.0 ± ± . 003.81) de (7.087) Model a b c d e 3.60 ± 0.20 3.50 ± .005 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0 CAT16-F4, -J4 & CAY16-F4, J4 (.142 ± .008) (.138 ± .004) (.315 ± .012) (.354 ± .012) (.449 ± .040) 1.80 ± 0.10 3.50 ± .005 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0 CAT16-J2 & CAY16-J2 (.070 ± .004) (.138 ± .004) (.315 ± .012) (.354 ± .012) (.449 ± .040) 6.90 ± 0.20 5.50 ± 0.10 12.0 ± 0.2 13.0 ± 0.2 15.4 ± 1.0 CAT16-F8, -J8 (.272 ± .008) (.217 ± .004) (.472 ± .008) (.512 ± .008) (.606 ± .040) 4.10 ± 0.15 3.50 ± 0.05 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0 CAY16-J8 (.161 ± .012) (.138 ± .002) (.315 ± .012) (.354 ± .012) (.449 ± .040) • 5,000 pcs. per reel (J2, J4, CAY16-J8) 4,000 pcs. per reel (CAT16-F8, -J8) REV. 09/14 • Paper tape Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.

Chip Resistor Arrays - Application Note Component Placement a. Reduce the mechanical stress to a minimum during and after placing of the unit in order not to damage the terminals and protective coating. b. Misplacement of components may cause solder bridges. Soldering a. Refl ow soldering: Recommendation is shown in the following chart. b. Wave soldering: Recommendation according to IEC standards. c. Hand soldering: Don’t touch the protective coating of the part. Solder within 3 seconds when the temperature is over 280 ºC. ) Preheating Soldering Gradual Cooling C ° ( 250 e r 200 u at 150 r e 100 p m 50 e T 0 60 sec. min. 10-30 sec. 120 sec. min. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.