Features n RoHS compliant* n Convex and concave terminals n 2, 4 or 8 isolated elements available n Resistance tolerance ±1 % and ±5 % n Resistance range: 10 ohms to 1 megohm CAT/CAY 16 Series - Chip Resistor Arrays Specifications Requirement Characteristics Test Method Short Time Overload ±2 % +0.1 ohm Rated Voltage X 2.5, 5 seconds Soldering Heat ±2 % +0.1 ohm 260 °C ±5 °C, 10 seconds ±1 second 125 °C (30 minutes) - normal (15 minutes) Temperature Cycling (5) ±1 % + 0.1 ohm -55 °C (30 minutes) - normal (15 minutes) Moisture Load Life ±3 % +0.1 ohm 1000 hours Load Life ±3 % +0.1 ohm 1000 hours Characteristics How To Order CA Y 16 - 103 J 4 LF Characteristics CAT16/CAY16 Chip Arrays Type Number of Elements 2 (J2), 4 (F4, J4), 8 (F8, J8) • CAT16 = Concave Terminations • CAY16 = Convex Terminations Power Rating Per Resistor @ 70 °C 0.0625 W Resistance Code 0.250 W • For 1 % Tolerance: P ackage Power Rating @ 70 °C (0.125 W for J2) <100 ohms - “R” represents decimal point (example: 24R3 = 24.3 ohms) Temperature Coefficient of Resistance ±200 PPM/°C ≥100 ohms - First three digits are significant, fourth digit represents Resistance Tolerance ±1 %, ±5 % number of zeros to follow (example: 8252 = 82.5k ohms) Resistance Range: E24 (J), E96 + E24 (F) • For 5 % Tolerance: 10 ohms - 1 megohm Zero-Ohm Jumper < 0.05 ohm <10 ohms - “R” represents decimal point (example: 4R7 = 4.7 ohms) Max. Working Voltage 50 V (25 V for CAY16-J8) ≥10 ohms - First two digits are signifi- cant, third digit represents number of Max. Overload Voltage 100 V (50 V for CAY16-J8) zeros to follow (example: 474 = 470k ohms) Operating Temp. Range -55 °C - 125 °C • 000 = Zero Ohm Jumper Resistance Tolerance • J = ±5 % (2, 4, 8 resistor pkg. and for Soldering Profile for RoHS Compliant Chip Resistors and Arrays Zero Ohm Jumper) 275 • F = ±1 % (4 resistor pkg. and CAT16-F8) <1>Maximum of 20 seconds between 260 °C peak Resistors +255 °C and +260 °C < 1 > 255 °C • 2 = 2 Isolated Resistors • 4 = 4 Isolated Resistors 225 • 8 = 8 Isolated Resistors 220 °C C) Terminations e (° 190 °C s6e0c o- n9d0s • LF = Tin-plated (RoHS compliant) ur175 at 150 °C Ramp Down er 6 °C/second p m Packaging Size Te125 60 - 120 seconds J2 ..........0606 Package Size 10 seconds minimum F4, J4 ....1206 Package Size 75 F8 ..........2406 Package Size for CAT16 Ramp Up 3 °C/second maximum J8 ..........2406 Package Size for CAT16; 1506 Package Size for CAY16 25 0 50 100 150 200 250 300 Time (Seconds) For Standard Values Used in Capacitors, Inductors, and Resistors, click here. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CAT/CAY 16 Series - Chip Resistor Arrays Derating Curve Schematics %) CAT16-J2(cid:20) CAT16-F4, -J4(cid:20) ge ( 100 CAY16-J2 C(cid:20)AY16-F4, -J4(cid:20) a cent 80 R1 R2 R1 R2 R3 R4 per 60 n er i 40 w CAT16-F8, -J8(cid:20) d po 20 C(cid:20)AY16-J8(cid:20) e Rat 0 -55 0 70 125 R1 R2 R3 R4 R5 R6 R7 R8 Ambient Temperature (˚C) Dimensions Model A A’ B C D E F 0.40 ± 0.15 3.20 ± 0.20 0.80 ± 0.10 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.15 CAT16-F4 — (.016 ± .006) (.126 ± .008) (.032 ± .004) (.063 ± .008) (.020 ± .004) (.012 ± .006) 0.40 ± 0.15 3.20 ± 0.20 0.80 ± 0.10 1.55 ± 0.25 0.50 ± 0.10 0.30 ± 0.20 CAT16-J4 — (.016 ± .006) (.126 ± .008) (.032 ± ± .004) (.061 ± .0098) (.020 ± .004) (.012 ± .008) CAY16-F4, -J4 0.50 ± 0.15 0.70 ± 0.10 3.20 ± 0.20 0.80 ± 0.05 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.20 (.002 ± .006) (.027 ± .004) (.126 ± .008) (.032 ± .002) (.063 ± .008) (.020 ± .004) (.012 ± .008) 0.40 ± 0.15 1.60 ± 0.15 0.80 ± 0.05 1.60 ± 0.15 0.60 ± 0.15 0.30 ± 0.20 CAT16-J2 — (.016 ± .006) (.063 ± .006) (.032 ± .002) (.063 ± .006) (.024 ± .006) (.012 ± .008) 0.60 ± 0.15 1.60 ± 0.15 0.76 ± 0.10 1.60 ± 0.15 0.45 +0.15/-0.10 0.30 ± 0.20 CAY16-J2 — (.024 ± .006) (.063 ± .006) (.030 ± .004) (.063 ± .006) (.018 +0.006/-0.004) (.012 ± .008) 0.40 ± 0.15 6.40 ± 0.20 0.80 ± 0.15 1.60 ± 0.20 0.60 ± 0.15 0.30 ± 0.20 CAT16-F8, -J8 — (.016 ± .006) (.252 ± .008) (.032 ± .006) (.063 ± .008) (.024 ± .006) (.012 ± .008) 0.30 ± 0.15 0.30 ± 0.15 3.80 ± 0.20 0.50 ± 0.05 1.60 ± 0.20 0.50 ± 0.10 0.30 ± 0.15 CAY16-J8 (.012 ± .006) (.012 ± .006) (.15 ± .008) (.02 ± .002) (.063 ± .008) (.02 ± .004) (.012 ± .006) Configurations CAT16-F4, -J4 CAY16-F4, -J4 CAT16-J2 CAY16-J2 A A' A A A' CAT16-F4, -J4 CAY16-F4, -J4 CAT16-J2 CAY16-J2 A A' A A A' F F F F D F F F F D C C C C F DIMENSIONS: MM BC BC B C BC E F (INCHES) B B B B E CAT16-F8, -J8 CAY16-J8 A A' A CAT16-F8, -J8 CAY16-J8 A A' A F F D F F D C C F C B BC E F B B E Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CAT/CAY 16 Series - Chip Resistor Arrays Land Patterns CAT16-F4, -J4, -F8, -J8 CAY16-F4, -J4, -J8 CAT16-J2 CAY16-J2 p p Solder Solder Solder Solder resist resist resist resist f Land f Land f Land f Land Chip Chip Chip Chip resistor resistor resistor resistor array array array array a a a a b p b p b b Model a b p f 0.7 to 0.9 0.4 to 0.45 0.80 2.2 to 2.6 CAT16-F4, -J4, -F8, -J8 (.028 to .035) (.016 to .0178) (.032) (.087 to .102) 0.7 to 0.9 0.4 to 0.45 0.80 2.4 to 2.8 CAY16-F4, -J4 (.028 to .035) (.016 to .0178) (.032) (.094 to .11) 0.7 to 0.9 0.3 to 0.35 0.50 2.0 to 2.2 CAY16-J8 (.028 to .035) (.012 to .014) (.020) (.079 to .087) 0.7 to 0.9 0.4 to 0.45 0.80 2.2 to 2.6 CAT16-J2 (.028 to .035) (.016 to .0178) (.032) (.087 to .102) 0.7 to 0.9 0.4 to 0.5 0.80 2.0 to 2.6 CAY16-J2 (.028 to .035) (.016 to .020) (.032) (.079 to .102) Packaging Dimensions 1.0 MAX. 1.5 + 0.1 - 0 4.0 ± 0.1 2.0 ± 0.5 (.039) (.059 + .004 - 0) (.158 ± .004) (.079 ± .020) 13.0 ± 0.5 (.511 ± .020) b c 60 (2.362) a D IMENSIONS: (INMCHMES) (.028. 0+ +.0 00.41//--.00.028) (.145.70 ±± .00.014) 180 (.82217.0 ± ± . 003.81) de (7.087) Model a b c d e 3.60 ± 0.20 3.50 ± .005 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0 CAT16-F4, -J4 & CAY16-F4, J4 (.142 ± .008) (.138 ± .004) (.315 ± .012) (.354 ± .012) (.449 ± .040) MM DIMENSIONS: (INCHES) 1.80 ± 0.10 3.50 ± .005 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0 CAT16-J2 & CAY16-J2 (.070 ± .004) (.138 ± .004) (.315 ± .012) (.354 ± .012) (.449 ± .040) 6.90 ± 0.20 5.50 ± 0.10 12.0 ± 0.2 13.0 ± 0.2 15.4 ± 1.0 CAT16-F8, -J8 (.272 ± .008) (.217 ± .004) (.472 ± .008) (.512 ± .008) (.606 ± .040) 4.10 ± 0.15 3.50 ± 0.05 8.0 ± 0.3 9.0 ± 0.3 11.4 ± 1.0 CAY16-J8 (.161 ± .012) (.138 ± .002) (.315 ± .012) (.354 ± .012) (.449 ± .040) • 5,000 pcs. per reel (J2, J4, CAY16-J8) 4,000 pcs. per reel (CAT16-F8, -J8) • Paper tape REV. 05/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Chip Resistor Arrays - Application Note Component Placement a. Reduce the mechanical stress to a minimum during and after placing of the unit in order not to damage the terminals and protective coating. b. Misplacement of components may cause solder bridges. Soldering a. Reflow soldering: Recommendation is shown in the following chart. b. Wave soldering: Recommendation according to IEC standards. c. Hand soldering: Don’t touch the protective coating of the part. Solder within 3 seconds when the temperature is over 280 ºC. C) Preheating Soldering Gradual Cooling ° e ( 250 ur 200 at 150 r e p 100 m 50 e T 0 60 sec. min. 10-30 sec. 120 sec. min. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B ourns: CAT16-150J4 CAT16-560J4 CAT16-240J4 CAT16-510J4 CAT16-220J4 CAY16-6801F4 CAT16-PT4F4LF CAY16-J4-LAB2 CAY16-6040F4 CAT16-301J4 CAY16-183J4 CAT16-153J4LF CAY16-683J8LF CAY16-183J8LF CAY16-301J4 CAY16-1002F4 CAT16-333J4 CAT16-242J4 CAY16-183J4LF CAY16-120J8LF CAY16-220J8LF CAY16-274J4 CAY16-683J4LF CAY16-333J4 CAT16-270J4 CAY16-334J8LF CAY16-821J4LF CAT16-1003F4 CAY16-621J4 CAY16-153J4 CAT16-2702F4 CAY16-91R0F4 CAT16-1690F4LF CAY16-222J8LF CAY16-122J8LF CAT16-PC2F6LF CAY16-474J4 CAY16-100J8LF CAY16-472J4GLF CAY16-222J4GLF CAY16-1202F4 CAY16- 102J4GLF CAT16-120J4 CAT16-000J4 CAY16-124J4 CAT16-2703F4LF CAT16-1003F4LF CAT16-86R6F4 CAT16-682J2 CAT16-682J4 CAT16-103J4 CAT16-103J8LF CAY16-4751F4 CAT16-3R0J4 CAT16-3R0J2 CAY16- 203J4LF CAY16-103J4LF CAY16-161J4 CAY16-3010F4LF CAY16-151J4LF CAY16-1210F4LF CAY16-5110F4LF CAY16-5491F4 CAT16-000J4G CAT16-151J8LF CAY16-224J4 CAT16-1800F4LF CAY16-103J4G CAY16-2430F4 CAT16-360J4 CAY16-105J4 CAY16-330J4LF CAT16-681J8LF CAY16-430J4LF CAY16-1622F4 CAT16-431J4 CAY16-6040F4LF CAY16-130J4LF CAY16-202J4 CAT16-390J4 CAY16-120J4 CAT16-2400F4LF CAT16- 2000F4LF CAT16-2200F4LF CAT16-4700F4LF CAT16-3300F4LF CAT16-1000F4LF CAY16-49R9F4 CAT16- 1500F4LF CAT16-LV2F6 CAT16-1100F4LF CAY16-2200F4LF CAY16-2700F4LF CAY16-3300F4LF CAY16- 1100F4LF CAY16-1500F4LF CAY16-1000F4LF CAY16-1200F4LF CAT16-20R0F4 CAY16-221J4