NT *RoHS VCEOARVMSIAPILOLINAASBLE Features NT MPLIA n RoHS compliant* n Paper tape on reel for automatic placement HS CO n 2/4 isolated resistors in an 0404/0804 size Ro package * n E24 series from 10 ohms to 1 megohm n Convex termination style n Resistance tolerance ±5 % REE n Suitable for all types of soldering processes D F LEA Model CAY10 - Chip Resistor Array Specifications RSShoeolqdruet irTrineimgm eHe Onetav te rload LVEEARDH SISF ORCNEOSE MAPRLIE ANCT*hara±±c21t e%%ri stics 260R °aCte ±d5 V °oCTlte,a 1sgt0e MsXe e2ct.oh5no, dd5s s ±e1c osnedcsond Ro Temperature Cycling (5) ±1 % 125 °C (30 minutes) - normal (15 minutes) -30 °C (30 minutes) - normal (15 minutes) Moisture Load Life ±3 % 1000 hours Load Life ±3 % 1000 hours Characteristics How To Order CA Y 10 - 103 J 4 LF Characteristics CAY10-xxxJ2 CAY10-xxxJ4 Chip Arrays Number of Elements (Isolated) 2 4 Type • Y = Convex Power Rating @ 70 °C per Resistor 0.0625 W 0.0625 W Model • 10 = 04 Package Width Package Power Rating @ 70 °C 0.125 W 0.250 W Resistance Code • <10 ohms: “R” represents decimal Resistance Tolerance ±5 % point (example: 4R7 = 4.7 ohms). • ≥10 ohms: First two digits are signifi- Resistance Range (E24) 3 ohms - 1 megohm cant, third digit represents number of plus Zero-ohm Jumper zeros to follow (example: 474 = 470k ohms 3 ohms ~ 9.1 ohms: ±500 ppm/°C T.C.R. • 000 = Zero-ohm Jumper 10 ohms ~ 1 megohm: ±250 ppm/°C Resistance Tolerance • J = ±5 % Max. Overload Voltage 50 V Resistors Max. Working Voltage 25 V • 2 = 2 Resistors • 4 = 4 Resistors Operating Temp. Range -55 °C to +125 °C Terminations • LF = Tin-plated (RoHS compliant) Rating Temperature +70 °C For Standard Values Used in Capacitors, Packaging 10,000 pieces per reel Inductors, and Resistors, click here. Characteristics Derating Curve Environmental Characteristics Protective 70 ϒC 125 ϒC 100 Moisture Sensitivity Level .........................1 Glass Overcoat Thick Film %) 80(cid:31) ESD Classification (HBM) .....................N/A Resistive Element d ( 60 a ed Lo 2400 Isolated Circuit Rat 0 CAY10-xxxJ2 44 33 -55 40 60 80 100 120 140 160 Ambient Temp. (˚C) RR RR Typical Part Marking Termination 11 22 High Purity Alumina None on part. Label on reel will include Substrate part number. CAY10-xxxJ4 88 77 66 55 RR RR RR RR WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov 11 22 33 44 *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf.

Model CAY10 - Chip Resistor Array Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1>Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C < 1 > 255 °C 225 220 °C e (°C)175 190 °C s6e0c o- n9d0s ur 150 °C Ramp Down erat 6 °C/second p m Te125 60 - 120 seconds 0.40 ± 0.15 0.40 ± 0.15 (.016 ± .006) (.016 ± .006) 10 seconds minimum 75 0.15 ± 0.10 0.25 ± 0.10 0.2 ± 0.10 Ramp Up (.006 ± .004) 1.0 ± 0.10 (.010 ± .004) 1.0 ± 0.10 (.0078 ± .004) 3 °C/second maximum (.040 ±.004) (.040 ±.004) 0.2 ± 0.10 (.0078 ± .004) 25 0 50 100 150 200 250 300 Time (seconds) 0.5 ± 0.05 0.30 ± 0.15 0.35 ± 0.10 0.5 ± 0.05 0.30 ± 0.15 0.35 ± 0.10 (.020 ± .002) (.012 ± .006) (.014 ± .004) (.020 ± .002) (.012 ± .006) (.014 ± .004) 2.0 ± 0.10 2.0 ± 0.10 (.079 ± .004) (.079 ± .004) Product Dimensions 0.50 0.50 CAY10-xxxJ4 CAY10-xx(.x02J02) (.020) 0.40 ± 0.15 0.40 ± 0.15 00.5.303 ± 0.10 0.33 ± 0.10 (.016 ± .006) (.016 ± .006) (.(0.02103) ± .004) (.013 ± .004) 1.50 (.059) 0.15 ± 0.10 0.25 ± 0.10 0.15 ± 0.10 0.250 .±2 0±. 100.10 0.2 ± 0.15 0.25 ± 0.10 (.006 ± .004) 1.0 ± 0.10 (.010 ± .004) (.006 ± .004) 1.0 ± 0.101.0 ± 0.10 (.0(1.000 ±7 8.0 ±0 4.0) 04) (.0078 ± .006) 1.0 ± 0.20 (.010 ± .004) (.040 ±.004) (.040 ±.00(4.0)4 0 ±.004) (.040 ±.008) 0.2 ± 0.10 (.0078 ± .004) 0.40 0.30 (.016) (.012) 0.5 ± 0.05 0.30 ± 0.15 0.35 ± 0.10 0.5 ± 0.05 0.67 ± 0.10 0.30 ± 0.15 0.305. 3±5 0 ±.1 00.10 0.65 ± 0.10 0.35 ± 0.10 (.020 ± .002) (.012 ± .006) (.014 ± .004) (.020 ± .002) (.026 ± .004) (.012 ± .006) (.01(.40 1±4 . 0±0 .40)0 4) (.025 ± .004) (.014 ± .004) 2.0 ± 0.10 2.10. 0± ±0 .01.010 1.0 ± 0.20 (.079 ± .004) (.0(.7094 0± ±.0 .0040)4 ) (.040 ± .008) Land Pattern 0.33 ± 0.10 0.33 ± 0.10 CAY10-xxx(J.0413 ± .004) (.013 ± .004) CAY10-xxxJ2 0.50 0.50 0.65 (.020) (.020) (.026) 0.15 ± 0.10 0.25 ± 0.10 0.2 ± 0.15 0.25 ± 0.10 DIMENSIONS: MM (.006 ± .(0.000.2450)0 ) (.10.400 ± ± 0.0.1004) (.010 ± .004) (.0078 ± .006) ((.0.010.254.0000 )± ± 0.0.2008) (.010 ± .004) (INCHES) 1.50 1.50 (.059) (.059) 0.67 ± 0.10 0.35 ± 0.10 0.65 ± 0.10 0.35 ± 0.10 (.026 ± .004) (.014 ± .004) (.025 ± .004) (.014 ± .004) 1.0 ± 0.10 1.0 ± 0.20 (.040 ± .004) (.040 ± .008) 0.40 0.30 0.35 MM (.016) (.012) DIMENSIONS: (.014) (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf. 0.65 (.026) 0.50 (.020) 1.50 (.059) 0.35 (.014)

Model CAY10 - Chip Resistor Array Packaging Dimensions (.00.1485 ±± ..000140) MAX. (.10.5590D +I±A ...000140) (.41.5070 ±± .00.0140) (.10.6795 ±± .00.0140) (.027.90 ±± .00.250) 13.0 ± 0.2 (.511 ± .008) CAY10-xxxJ2:(.10.4270 ±± .00.0140) 3.50 ± 0.05 60 (.138 ± .002) (2.362) 8.00 ± 0.20 (.315 ± .008) CAY10-xxxJ4: 2.20 ± 0.10 9.0 ± 0.3 (.087 ± .004) 21.0 ± 0.8 (.354 ± .012) (.014.00) MAX. (.10.4270 ±± .00.0140) (.20.7090 ±± .00.0140) (71.08807) (.827 ± .031) (.41419.4 ± ± . 014.00) MM DIMENSIONS: (INCHES) REV. 09/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and atw ww.bourns.com/docs/legal/disclaimer.pdf.

Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R