Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Overview KEMET’s 900 encapsulated radial leaded ceramic disc the capacitor fail, but could result in a risk of fire. The class capacitors are specifically designed for interference-sup- Y capacitor is primarily used in line-to-ground (line by-pass) pression AC line filtering applications. Having internation- applications. In this application, failure of the capacitor could ally recognized safety certifications, these capacitors are lead to danger of electric shock. well-suited for applications that require keeping potentially disruptive or damaging line transients and EMI out of sus- With a working voltage of 440 VAC in line-to-line (Class X) ceptible equipment. They are also an ideal solution when and 300 VAC in line-to-ground (Class Y) applications, these needing to suppress line disturbances at the source. safety capacitors meet the impulse test criteria outlined in IEC Standard 60384. Meeting subclass X1 and Y2 require- Safety Certified Capacitors are classified as either X and/ ments, these devices are certified to withstand impulses up or Y capacitors. Class X capacitors are primarily used in to 4 KV (X1) and 5 KV (Y2) respectively. These encapsulated line-to-line (across-the-line) applications. In this applica- devices also meet the flame test requirements outlined in UL tion, there is no danger of electric shock to humans should Standard 94 V–0. Benefits • Safety standard recognized (IEC 60384–14) • Reliable operation up to 125°C • Class X1/Y2 • 7.5 and 10 mm lead spacing • Lead (Pb)-free and RoHS Compliant • Halogen-free • Capacitance offerings ranging from 10 pF up to 10 nF • Available capacitance tolerances of ±5%, ±10%, and ±20% • High reliability • Preformed (crimped) or straight lead configurations • Non-polar device, minimizing installation concerns • Encapsulation meets flammability standard UL 94 V–0 Applications Typical applications include: • Line-to-line (Class X) filtering • Line-to-ground (Class Y) filtering • Antenna coupling • Primary and secondary coupling (switching power supplies) • Line disturbances suppression (motors and motor controls, relays, switching power supplies, and invertors) One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Ordering Information C9 7 1 U 472 M Z W D A A 7317 Ceramic Body Lead Capacitance Capacitance Rated Dielectric/ Lead Failure Packaging Spec. Design Series Diameter Spacing1,3 Code (pF) Tolerance Voltage Temp. Char. Configuration2,3 Rate (C-Spec) C9 = 0 = 7.0 mm 7 = 7.5 mm U = Two J = ±5% Z = X1 S = SL D = A = Straight A = See Ceramic 1 = 8.0 mm 1 = 10.0 Safety significant K = ±10% 440 VAC Y = Y5P Disc B = Vertical N/A "Packaging 900 2 = 9.0 mm mm digits and M = ±20% /Y2 300 W = Y5U Kink C-Spec Series 3 = 10.0 mm number of VAC V = Y5V C = Outside Ordering 4 = 11.0 mm zeroes Kink Options Table" 6 = 13.0 mm 8 = 15.0 mm 1 Capacitor body diameter will limit available lead spacing and packaging options. See "Dimensions" and "Product Ordering Codes and Ratings" sections of this document to determine availability. 2 "Vertical Kink" and "Outside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact KEMET. 3 Bulk packaging lead length availability is dependent upon "Lead Configuration" and "Lead Spacing." See "Dimensions" section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. Packaging C-Spec Ordering Options Table Lead Length Packaging Packaging Type (mm)2,3 Ordering Code (C-Spec) Ammo Pack See Note 5 7317 3.0±1.0 WL30 3.5±1.0 WL35 4.0±1.0 WL40 Bulk Bag 4.5±1.0 WL45 5.0±1.0 WL50 20.0 minimum4 WL20 1 Preformed (crimped) lead configurations include "Vertical Kink" and "Outside Kink." See "Lead Configurations" and "Ordering Information" sections of this document for further details. 2 "Vertical Kink" and "Outside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contact KEMET. 3 For nonstandard lead length inquiries, please contact KEMET. 4 Lead length of 20.0 mm minimum only available for straight leads. 5 Lead length for ammo pack packaging is defined by the H and H dimensions in Table 3. 0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Lead Configurations Straight Vertical Kink Outside Kink D T D T D T 3.0 3.0 3.0 Maximum Maximum Maximum 4.0 Maximum 5.0 Maximum LL LL LL F F F S S S Dimensions – Millimeters S D T e ØF Lead Lead Lead Configuration Spacing Lead Body Body Lead Lead Configuration Ordering Code1 Tolerance Spacing2 Diameter2 Thickness Meniscus Diameter 7.5 ±1.0 Straight A 10.0 ±1.0 7.5 ±1.0 See Table 1 - Vertical Kink 3.0 B "Product Ordering Codes 0.55±0.1 (Preformed) maximum 10.0 ±1.0 and Ratings" 7.5 ±1.0 Outside Kink C (Preformed) 10.0 ±1.0 1 Lead Configuration is identified in the 13th character of the ordering code. See "Lead Configuration" and "Ordering Information" sections of this document for further details. 2 Body diameter of capacitor will limit available lead spacing and packaging options. See "Product Ordering Codes and Ratings" sections of this document for further details. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Approval Standard and Certification No. Safety Standard Standard No. Subclass Working Voltage Certificate No. VDE X1 440 VAC IEC 60384–14 40036415 (ENEC) Y2 300 VAC UL UL 60384–14 and X1 440 VAC E356389 CAN/CSA E60384–14 Y2 300 VAC These devices are VDE/ENEC and UL recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications per IEC60384–14 and UL 60384–14. Environmental Compliance These devices are Halogen-free and RoHS Compliant. They meet all requirements set forth by both EU and China RoHS directives. General Specifications/Performance Characteristics Dielectric/Temperature Characteristic SL Y5P Y5U Y5V Operating Temperature Range: −40°C to +125°C Capacitance Change with Reference to +25°C −1,000 ~ +350 ppm/ ±10% +20%/−55% ~ +30%/−80% and 0 VDC Applied (TCC): ºC Dielectric Withstanding Voltage 2,600 VAC (7.5 and 10 mm Lead Spacing) (60 ±5 seconds at 25ºC) 30 pF and above: ≥ 1,000 Quality Factor (Q) See “Dissipation Factor” Below 30 pF: ≥ 400 +(20xC)* Dissipation Factor (tanδ) at +25ºC1 See “Quality Factor” 2.50% 2.50% 5.0% 10,000 MΩ Minimum Insulation Resistance (IR) Limit at +25°C (500 VDC applied for 60 ±5 seconds at 25°C) *C = Nominal capacitance 1 Capacitance and Dissipation Factor (DF) measured under the following conditions: SL: 1 MHz ±100 kHz and 1.0 ±0.2 Vrms X5P, Y5U and Y5V: 1 kHz ±50 Hz and 1.0 ±0.2 Vrms Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 1 – Product Ordering Codes and Ratings Dimensions (mm) Lead Spacing Dielectric/ KEMET Capacitance Body Body Temp. Capacitance Lead Bulk Ammo Part Number Tolerance Diameter Thickness Char. Diameter Packaging Packaging (Maximum) (Maximum) C90(1)U100JZSD(2)A(3) 10 pF C90(1)U120JZSD(2)A(3) 12 pF C90(1)U150JZSD(2)A(3) 15 pF C90(1)U180JZSD(2)A(3) 18 pF C90(1)U200JZSD(2)A(3) 20 pF C90(1)U220JZSD(2)A(3) 22 pF C90(1)U240JZSD(2)A(3) 24 pF C90(1)U270JZSD(2)A(3) 27 pF 7.0 C90(1)U300JZSD(2)A(3) 30 pF C90(1)U330JZSD(2)A(3) 33 pF 7.5 mm SL C90(1)U360JZSD(2)A(3) 36 pF ±5% 5.0 0.55±0.1 or C90(1)U390JZSD(2)A(3) 39 pF 10 mm C90(1)U470JZSD(2)A(3) 47 pF C90(1)U500JZSD(2)A(3) 50 pF C90(1)U510JZSD(2)A(3) 51 pF C91(1)U560JZSD(2)A(3) 56 pF C91(1)U620JZSD(2)A(3) 62 pF 8.0 C91(1)U680JZSD(2)A(3) 68 pF C91(1)U750JZSD(2)A(3) 75 pF C92(1)U820JZSD(2)A(3) 82 pF 9.0 C93(1)U101JZSD(2)A(3) 100 pF 10.0 C90(1)U101KZYD(2)A(3) 100 pF C90(1)U151KZYD(2)A(3) 150 pF C90(1)U221KZYD(2)A(3) 220 pF 7.0 C90(1)U331KZYD(2)A(3) 330 pF 7.5 mm Y5P C90(1)U471KZYD(2)A(3) 470 pF ±10% 5.0 0.55±0.1 or C91(1)U561KZYD(2)A(3) 560 pF 10 mm 8.0 C91(1)U681KZYD(2)A(3) 680 pF C92(1)U821KZYD(2)A(3) 820 pF 9.0 C92(1)U102KZYD(2)A(3) 1,000 pF C90(1)U102MZWD(2)A(3) 1,000 pF 7.0 C92(1)U152MZWD(2)A(3) 1,500 pF 9.0 7.5 mm C92(1)U222MZWD(2)A(3) 2,200 pF Y5U ±20% 5.0 0.55±0.1 or C94(1)U332MZWD(2)A(3) 3,300 pF 11.0 10 mm C96(1)U392MZWD(2)A(3) 3,900 pF 13.0 C96(1)U472MZWD(2)A(3) 4,700 pF C90(1)U102MZVD(2)A(3) 1,000 pF C90(1)U152MZVD(2)A(3) 1,500 pF 7.0 C90(1)U222MZVD(2)A(3) 2,200 pF 7.5 mm C92(1)U332MZVD(2)A(3) 3,300 pF 9.0 Y5V ±20% 5.0 0.55±0.1 or C94(1)U392MZVD(2)A(3) 3,900 pF 11.0 10 mm C94(1)U472MZVD(2)A(3) 4,700 pF C96(1)U682MZVD(2)A(3) 6,800 pF 13.0 C98(1)U103MZVD(2)A(3) 10,000 pF 15.0 Capacitance Body Diameter Body Thickness KEMET Part Number Capacitance Lead Diameter Lead Spacing Tolerance (Maximum) (Maximum) (1) To properly complete ordering code, insert the one-digit numeric code to reflect required lead spacing: (Note that select capacitance values and packaging options may limit lead spacing availability. See table above to verify availability.) 7 = 7.5 mm 1 = 10.0 mm (2) To properly complete ordering code, insert the one-digit character code to reflect the required lead configuration: (See "Lead Configuration" section of this document, page 2, for further details.) A = Straight B = Vertical Kink C = Outside Kink (3) To properly complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See "Dimensions" section of this document, page 2, for available options. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions Item Specification Test Method Operating Temperature Range −40ºC to +125ºC Between lead The capacitor shall not be damaged when 2,600 VAC (rms) is No failures wires applied between the lead wires for 60 seconds. The terminals (leads) of the capacitor shall be connected together. A metal foil is tightly Dielectric wrapped around the body of the capacitor at a distance of about 3 to 4 mm from each Strength Body Insulation No failures terminal. The capacitor is then inserted MFeotiall about into a container filled with metal balls 3 to 4 mm approximately 1 mm in diameter. 2,600 VAC Metal (rms) is applied for 60 seconds between the Balls capacitor lead wires and metal balls. The insulation resistance shall be measured with 500 ±50 VDC Insulation Resistance (IR) 10,000 MΩ minimum applied after 60 ±5 seconds of charging. Capacitance Within specified tolerance Temperature Specification Characteristics Y5P, Y5U DF ≤ 2.5% Y5P, Y5U, and Y5V: Capacitance is measured at 1 kHz ±20% and 5 V or less. (20±2°C) Y5V DF ≤ 5.0% rms SL: Capacitance is measured at 1 MHz ±20% and Dissipation Factor (DF) or Q SL ≥ 30 pF: Q ≥ 1,000 1.0 ±0.2 V (25°C) rms < 30 pF: Q ≥ 400 +(20 x C) C = Nominal capacitance A capacitance measurement is made at each step specified: Step Temperature Temperature Capacitance Characteristics Change 1 +20±2ºC 2 −25±2ºC Y5P Within ±10% Temperature Characteristics 3 +20±2ºC Y5U Within +20%/−55% 4 +85±2ºC Y5V Within ~+30%/−80% 5 +20±2ºC SL −1,000 ~+350 ppmºC Pre-treatment: (+20ºC ~+85ºC) Capacitor is stored at 85±2ºC for 1 hour and then placed at room condition1 for 24±2 hours before measurement. With the termination in its normal position, the specimen is held by its body in such a manner that the axis of the termination is Lead wire or capacitor body shall not Tensile vertical; a tensile force of 10 N is applied to the termination in the break. direction of its axis and acting in a direction away from the body of the specimen. With the termination in its normal position, the specimen is held Terminal by its body in such a manner that the axis of the termination is Strength vertical; a mass force of 5 N is then suspended from the end of the termination. The body of the specimen is then inclined within Lead wire or capacitor body shall not Bending a period of 2 to 3 seconds, through an angle of approximately 90° break. in the vertical plane and then resumed to its initial position over the same period of time; this operation constitutes one bend. One bend immediately followed by a second bend in the opposite direction. 1 “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont'd Item Specification Test Method The lead wire of the capacitor is dipped into molten solder for Lead wire should have a uniform coating 5±0.5 seconds. The depth of immersion is up to 1.5 mm Solderability of solder in the axial direction and over (+5/−0 mm) from the root of lead wires. 3/4 of its circumference. Solder Temperature: Lead free solder (Sn-3Ag – 0.5 Cu) 245°C ±5°C. Appearance No visual defect As shown in the figure below, the lead wires are immersed in molten solder up to 1.5 mm (+5/−0 mm) from the end of the IR 1,000 MΩ epoxy meniscus (root of lead wire). Dielectric Duration/Solder Temperature: 3.5±0.5 seconds/350°C ±10°C or Per item 1 10±1 seconds/260°C ±5°C Strength Thermal Capacitor Screen Soldering Effect 1.5 to (Non-Preheat) 2.0 mm Y5P, Y5U, and Y5V: Within ±10% Molten Solder Capacitance SL: Within ±2.5% or ±0.25 pF, whichever is larger Pre-treatment: Capacitor is stored at 85°C ±2°C for 1 hour and then placed at room condition1 for 24 ±2 hours before initial measurements. Post-treatment: Capacitor is stored for 1 to 2 hours at room condition1. Appearance No visual defect Capacitor is stored at 120°C +0/−5°C for 60 +0/−5 seconds. Then, as shown in the figure below, the lead wires are immersed IR 1,000 MΩ in molten solder up to 1.5 mm (+5/-0mm) from the end of the Dielectric epoxy meniscus (root of lead wire). Per item 1 Strength Duration/Solder Temperature: 7.5 +0/−1 seconds/260°C ±5°C Thermal Capacitor Screen Soldering Effect 1.5 to (Preheat) 2.0 mm Y5P, Y5U, and Y5V: Within ±10% Molten Capacitance SL: Within ±2.5% or ±0.25 pF, whichever Solder is larger Pre-treatment: Capacitor is stored at 85°C ±2°C for 1 hour and then placed at room condition1 for 24 ±2 hours before initial measurements. Post-treatment: Capacitor is stored for 1 to 2 hours at room condition1. Appearance No visual defect Steady State Humidity: Load Humidity: Temperature Capacitance Characteristics Change Y5P Within ±10% Y5U Within ±20% Capacitance Y5V Within ±30% SL Within ±2.5% or 90 to 95% humidity at 40°C 90 to 95% humidity at 40°C ±0.25 pF, whichever ±2°C for 500 ±12 hours. ±2°C for 500 ±12 hours with Biased Humidity full rated voltage applied. is larger Post Treatment: Y5P and Y5U: 5.0% maximum Capacitor is stored for 1 to 2 Post Treatment: DF Capacitor is stored for 1 to 2 Y5V: 7.5% maximum hours at room condition1. hours at room condition1. SL: Less than 30 pF: Q ≥ 100 + 10 × C/3 Q More than 30 pF: Q ≥ 200 C = Nominal capacitance Y5P, Y5V, and Y5U: 3,000 MΩ minimum IR SL: 1,000 MΩ minimum Dielectric No failures Strength 1 “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont'd Item Specification Test Method Appearance No visual defect Impulse Voltage: Each individual capacitor is subjected to three 5 kv impulses prior to life testing. Y5P, Y5V, and Y5U: Within ±20% Capacitance SL: Within ±3 or ±0.3 pF, Vp UPR Cx tr td Change (uF)(uS)(uS) whichever is larger. e0.9Vp g UPP 0.011.2 46 3,000 MΩ minimum a 0.1 1.5 47 IR t SL: 1,000 MΩ minimum ol0.5Vp High V Temperature Life Dielectric tr td Time No failures Strength Capacitors are placed in a circulating air oven for a period of 1,000 hours. The air in the oven is maintained at a temperature of 125°C ±2 throughout the test. The capacitors are subjected to AC 510 V . Each hour the voltage is increased to 1,000 V for 0.1 rms rms seconds. The capacitor is exposed to a flame for 15 seconds and then The capacitor flame extinguishes as removed for 15 seconds. This test is repeated for 5 cycles. follows: Capacitor Cycle Time Flame 76 Flame Test 1 ~ 4 30 seconds 38 127 maximum 60 seconds 5 Gas Burner maximum 20º (Unit:mm) The capacitors are individually wrapped in at least one, but not more than two, complete layers of cheesecloth. They are then subjected to 20 discharges. The interval between successive discharges is 5 seconds. The VAC is maintained for 2 minutes after the last discharge. S1 F L1 L2 R C1 C2 C3 CX Ct Vt Tr S2 Vac L3 L4 Oscilloscope C 1 μF ±10% C 0.033 μF ±5% 10 kV 1, 2 3 Active Flammability The cheesecloth should not ignite. L 1.5 Mh ±20% 16A Rod core choke Cx Test capacitor 1-4 R 100±2% V VR ±5% AC Ct 3 μF ±5% 10 kV V Rated Voltage R F Fuse, Rated 10A Vt Voltage applied to Ct Vx 5kV time 1 “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 2 – Performance & Reliability: Test Methods and Conditions cont'd Item Specification Test Method The capacitor under test is held into a flame and in a position which best promotes burning. Each specimen is exposed to the flame one time. m Test Specimen m 8 ut bo 200 A 45º ±5mm Tissue The burning time should not exceed 30 Passive Flammability seconds. About 10mm The tissue paper should not ignite. Thick Board Time of exposure to flame: 30 seconds Length of flame: 12 ±1 mm Gas burner length: 35 mm minimum Inside diameter: 0.5 ±0.1 mm Outside diameter: 0.9 mm maximum Gas butane gas purity: 95% minimum Appearance No visual defect Temperature Capacitance The capacitor is subjected to 5 temperature cycles. Characteristics Change Temperature Cycle Capacitance SL Within ±5% Dwell Transition Y5P Within ±10% Step Temperature (°C) Time Time Y5U, Y5V Within ±20% (minutes) (minutes) 1 −40+0/−3 30 Temperature SL ≥ 30 pF: Q ≥ 350 Cycle < 30 pF: Q ≥ 275 2 Room temperature 3 +5/2C 3 3 125+3/−0 30 C = Nominal DF/Q capacitance 4 Room temperature 3 Y5P DF ≤ 5% Pre-treatment: Capacitor shall be stored at 85 ±2 for 1 hour then Y5U, Y5V DF ≤ 7.5% placed at room condition1 for 24 ±2 hours. Post-treatment: Capacitor is stored for 1 to 2 hours at room IR 3,000 MΩ minimum condition1. Dielectric No failures Strength 1 “Room Condition” is defined as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Soldering and Mounting Information Soldering: When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may result in thermal shocks that can crack the ceramic element. When soldering these capacitors with a soldering iron, it should be performed under the following conditions: • Temperature of iron-tip: 400ºC maximum • Soldering iron wattage: 50 W maximum • Soldering time: 3.5 seconds maximum Cleaning (ultrasonic cleaning): To perform ultrasonic cleaning, observe the following conditions: • Rinse bath capacity: Output of 20 watts per liter or less • Rinsing time: 5 minute maximum • Do not vibrate the PCB/PWB directly • Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires Construction Detailed Cross Section Epoxy Encapsulation (0.4 mm Minimum Thickness, Pigment = Blue/UL 94 V-0) Lead Attach Solder (Sn96.5/Ag3/Cu0.5) Dielectric Material (BaTiO) 3 Electrode Electrode (Ag – Glass Frit) (Ag – Glass Frit) Lead Attach Solder Lead Wire (Sn96.5/Ag3/Cu0. Core Metal Steel Dielectric Barrier Layer Cu Material 100% Sn (BaTiO) Finish Layer (3-7 µm) 3 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Marking These capacitors shall be stamped or laser marked with KEMET's trademark, type designation, capacitor class, rated voltage, rated capacitance, and capacitance tolerance codes. In addition, all devices are marked with the recognized approval mark and a date/lot code for traceability. Marking will be supplied either on one side or both sides of the encapsulated capacitor body. All marking shall be legible to allow for clear identification of the component. Marking appears in legible contrast. Illustrated below is an example of the marking format and content. (Two-sided marking is limited to capacitors with body diameters ≤ 8.0 mm) Single Sided Rated Capacitance KEMET ID (3 Numeric Characters) Type Designation Capacitance Tolerance Code (2 Characters) (1 Character) VDE & ENEC Capacitor Class approval marks and Rated Voltage IEC 60384-14 3rd (2005) UL approval mark Date/Lot Code (See Table Below) Double Sided Front Back Rated Capacitance UL approval mark KEMET ID (3 Numeric Characters) Type Designation Capacitance VDE & ENEC (2 Characters) Tolerance Code approval marks (1 Character) IEC 60384-14 3rd Capacitor Class (2005) and Rated Voltage Date/Lot Code (See Table Below) Date/Lot Code Explanation 6 C 6 1234 Manufacturing Month: Last digit of year, e.g., Manufacturing Last 4 digits of 1-9 = Jan - Sept Location Code lot number A = October 6 = 2016 N = November D = December © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Packaging Quantities Ammo Pack (Carrier Tape) Capacitor Body Diameter Bulk Bag Body Diameter Component pitch on carrier tape2 Code1 (Loose) (mm) 12.7 mm 15 mm 25.4 mm 7.0 0 8.0 1 9.0 2 1,000 pieces/box 10.0 3 11.0 4 500 pieces/bag 1,000 pieces/box 12.0 5 13.0 6 14.0 7 500 pieces/box 15.0 8 1 The "Body Diameter Code" is located in the third character position of the ordering code. This code identifies the maximum diameter of the capacitor body in millimeters. For more information regarding the ordering code, see "Ordering Information" section of this document. 2 For details regarding component pitch on carrier tape, see "Ammo Pack Taping Format" and "Ammo Pack Taping Specifications" sections of this document. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 12 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Figure 1 - Ammo Pack Taping Format 5 mm and 7.5 mm Lead Spacing: For All Lead Spacing: ∆S P P D 2 ∆h 0 ∆h 1 2 e T maximum P Ød W Marking Side 1 F 2 L W 1 W W 0 P0 ℓ ØD0 t2 t1 10 mm Lead Spacing: P P ∆S 2 D e P 1 F Ød W2 H H L W 0 1 W0 W P0 ℓ ØD0 Table 3 – Ammo Pack Taping Specifications Lead Spacing 5 mm 7.5 mm 10 mm Lead Style Straight Preformed1 Straight Preformed1 Straight Preformed1 Item Symbol Dimensions (mm) Lead Spacing F 5.0+0.8/−0.2 7.5±1.0 10.0±1.0 Component Pitch P 12.7 15.0 25.4±2 Sprocket Hole Pitch P 12.7±0.3 15.0±0.3 12.7±0.3 0 Sprocket Hole Center to P 6.35±1.5 7.5±1.5 12.7±1.5 Component Center 2 Sprocket Hole Center to Lead P 3.75±1.0 3.75±1.0 7.7±1.5 Center 1 Body Diameter D See "Product Ordering Codes and Ratings" section of this document. Component Alignment (side/side) ∆S 0±2.0 Carrier Tape Width W 18.0+1.0/−0.5 1 Prefromed (crimped) lead configurations include vertical kink and outside kink. See "Lead Configurations" and "Ordering Information" sections of this document for further details. 2 Also referred to as "lead length" in this document. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 3 – Ammo Pack Taping Specifications cont'd Lead Spacing 5 mm 7.5 mm 10 mm Lead Style Straight Preformed1 Straight Preformed1 Straight Preformed1 Item Symbol Dimensions (mm) Sprocket Hole Position W 9.0±0.5 1 Height to Seating Plane2 H N/A 18.0+2.0/−0 N/A 18.0+2.0/−0 N/A 18.0+2.0/−0 (preformed leads1) 0 Height to Seating Plane2 H 20.0+1.5/−1.0 N/A 20.0+1.5/−1.0 N/A 20.0+1.5/−1.0 N/A (straight leads) Lead Protrusion ℓ 2.0 maximum Diameter of Sprocket Hole D 4.0±0.2 0 Lead Diameter φd 0.55±0.1 Carrier Tape Thickness t 0.6±0.3 1 Total Thickness (Carrier Tape, t 1.5 maximum Hold-Down Tape and Lead) 2 Component Alignment (front/ ∆h 1 2.0 maximum back ) ∆h 2 Cut Out Length L 11.0 maximum Hold-Down Tape Width W 11.0 minimum 11.5 minimum 0 Hold-Down Tape Position W 3.0 maximum 1.5±1.5 2 1 Prefromed (crimped) lead configurations include vertical kink and outside kink. See "Lead Configurations" and "Ordering Information" sections of this document for further details. 2 Also referred to as "lead length" in this document. Application Notes: Storage and Operating Conditions: The insulating coating of these devices does not form an air and moisture-tight seal. Avoid exposure to moisture and do not use or store these devices in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt, or the like are present. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. Store the capacitors where the temperature and relative humidity do not exceed 40 degrees Centigrade and 70% respectively. For optimum solderability, capacitor stock should be used promptly, preferably within 6 months of receipt. Working Voltage: Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a capacitor with a voltage rating greater than or equal to these irregular voltages. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Operating Temperature and Self-Generating Heat: The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated heating should not exceed 20°C (while operated at an atmosphere temperature of 25°C). Handling - Vibration and Impact: Do not expose these devices or their leads to excessive shock or vibration during use. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 15 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1065_X1_440 VAC_Y2_300 VAC • 05/23/19 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com