0.4mm Contact Pitch Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8mm type) Two-point Molded structure contact system d. e v r e s e R s ht g Ri All Features Molded structure D. T 1. Two stacking height options L O., Two separate heights available : 0.8 and 1.3mm The molded structure provides security and C insulation between the terminals and the board Fig.1 C 2. Ultra space-saving design RI With its drastically reduced depth of 1.98mm, CT this series can fit in the tightest designs. Solid mating feedback E L 3. Two point contact system E Dimple on contact SE The two point contact structure encloses the Point A O plug contacts and assures a completely secure R connection. (Fig.1) HI 8 4. Superior tactile feedback 1 0 2 A clear tactile click is delivered upon the ht successful completion of the mating process. g (Fig. 2) ri y op 5. Drop and shock resistant structure C 8 Dimples were designed into the plug contacts ; 1 they increase retention force and absorb shock 0 Insertion force 2 when dropped. 1. 70 c. 6. User friendly operations 60 e D The low-profile connectors with stacking height 50 of 0.8mm maintain the mating self-alignment N) 40 range of 0.3mm, securing easy mating e ( 30 Clear tactile operations. rc 20 feeling o 7. No pattern prohibited area n f 10 o ti 0 No restrictions on PCB layout pattern are er -10 s imposed, as thin molding technology maintains n Time I the effective mating length of 0.2mm while Distance (mm) achieving complete insulation between the bottom side of the receptacle and the board. Image : 0.8mm stacking height Fig.2 Ipnl ecaassee sc ownhtaecret ath ceo ampppalincya trieopnr ewsielln dteamtivaen fdo ar fhuirgthh eler vineflo orfm raetliiaobni.lity, such as automotive, 2018.1e 1

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Product Specifi cations Current Operating temperature range -35°C to +85°C (Note 1) 0.3A capacity Operating humidity range 20% to 80% RH Ratings Storage temperature range -10°C to +60°C (Note 2) Rated voltage 30V AC, DC Storage humidity range 40% to 70% RH (Note 2) Item Specifi cation Conditions 1.Insulation resistance Minimum of 500Mø 100V DC 2.Withstanding voltage No fl ashover or insulation breakdown 100V AC / 1minute 3.Contact resistance Maximum of 100mø 20mV AC, 1kHz, 1mA ved. 4.Vibration No electrical discontinuity of 1µs or longer F2 rheoquuresn icny e :a 1c0h toof 5th5eH z3, dsiirnegclteio anmsplitude of 0.75mm, r e s Contact resistance : Maximum of 100mø e 5.Humidity 96 hours at 40 ±2ç and humidity of 90 to 95% R Insulation resistance : Minimum of 25Mø s ht Temperature : -55ç ➝ 5 to 35ç ➝ 85°C ➝ 5 to 35ç g Contact resistance : Maximum of 100mø Ri 6.Temperature cycle Insulation resistance : Minimum of 50Mø Time : 30 ➝ 10 ➝ 30 ➝ 10 (minutes) All 5 cycles D. 7. Durability Contact resistance : Maximum of 100mø 10 mating cycles T (mating/unmating) L O., 8. Resistance to soldering No deformation of components affecting Refl ow : At the recommended temperature profi le C heat performance Manual soldering: 350ç for 3 seconds C RI Note 1 : Includes temperature rise caused by current fl ow. T Note 2 : The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating C temperature and humidity range covers the non-energized condition of connectors after board mounting and the E L temporary storage conditions during transportation, etc. E E S O Materials / Finish R HI Product Component Material Color/Finish Remarks 8 1 Receptacle Insulator LCP Color: Black UL94V-0 0 ht 2 Header Contacts Phosphor bronze Gold plated −−−− g ri y p Product Number Structure o C 8 Refer to the chart below when determining the product specifications from the product number. 1 Please select from the product numbers listed in this catalog when placing orders. 0 2 1. c. e ●Receptacles / Headers D BM 14 # (**) − * DS − 0.4 V (**) ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❾ ❶ Series name : BM ❻ Connector style ❷ Series No. : 14 DS : Double-row receptacle DP : Double-row plug ❸ Confi guration B : With metal fi ttings ❼ Contact pitch : 0.4mm C : Without metal fi ttings ❽ Termination type EB : With metal fi ttings V : SMT vertical mount EC : Without metal fi ttings JB : Connector for conductivity tests, with metal fi ttings ❾ Packaging JC : Connector for conductivity tests, without metal fi ttings (51) : Embossed tape packaging (8,000 pcs/reel) (52) : Embossed tape packaging with pick-and- ❹ Stacking heights : 0.8mm, 1.3mm place tape (8,000 pcs/reel) ❺ Number of contacts : (55) : Embossed tape packaging (500 pcs/reel) 2

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors H = 0.8mm Receptacle A B P=0.4 8 9 1. 0.1 7 6 0.8 0. d. e v r e s e R s ht g Ri Recommended PCB layout (H = 0.8mm) All With metal fittings Without metal fittings D. T C±0.02 B±0.02 L O., 0.3±0.02 0.4±0.02 P=0.4±0.02 C C LECTRI 2.28+0.05 0 01.48-0.05 +0.052.28 0 01.48-0.05 E E 0.2±0.02 S O 0.41±0.02 0.2±0.02 R HI 8 With metal fittings Unit : mm 1 0 Part No. HRS No. No. of Contacts A B C 2 ht BM14B(0.8)-10DS-0.4V(51) 684-8003-5 51 10 4.48 2.4 1.6 g ri BM14B(0.8)-12DS-0.4V(51) 684-8041-4 51 12 4.88 2.8 2.0 y p BM14B(0.8)-20DS-0.4V(51) 684-8004-8 51 20 6.48 4.4 3.6 o C BM14B(0.8)-24DS-0.4V(51) 684-8005-0 51 24 7.28 5.2 4.4 8 BM14B(0.8)-30DS-0.4V(51) 684-8006-0 51 30 8.48 6.4 5.6 1 0 2 BM14B(0.8)-34DS-0.4V(51) 684-8007-6 51 34 9.28 7.2 6.4 1. BM14B(0.8)-40DS-0.4V(51) 684-8008-9 51 40 10.48 8.4 7.6 c. e BM14B(0.8)-50DS-0.4V(51) 684-8009-1 51 50 12.48 10.4 9.6 D BM14B(0.8)-60DS-0.4V(51) 684-8001-0 51 60 14.48 12.4 11.6 Without metal fittings Unit : mm Part No. HRS No. No. of Contacts A B BM14C(0.8)-14DS-0.4V(51) 684-8017-0 51 14 4.48 2.4 BM14C(0.8)-16DS-0.4V(51) 684-8039-2 51 16 4.88 2.8 BM14C(0.8)-24DS-0.4V(51) 684-8018-2 51 24 6.48 4.4 BM14C(0.8)-28DS-0.4V(51) 684-8019-5 51 28 7.28 5.2 BM14C(0.8)-34DS-0.4V(51) 684-8020-4 51 34 8.48 6.4 BM14C(0.8)-38DS-0.4V(51) 684-8021-7 51 38 9.28 7.2 BM14C(0.8)-44DS-0.4V(51) 684-8022-0 51 44 10.48 8.4 BM14C(0.8)-54DS-0.4V(51) 684-8023-2 51 54 12.48 10.4 BM14C(0.8)-64DS-0.4V(51) 684-8024-5 51 64 14.48 12.4 Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fi ttings" and "without metal fi ttings" is that the contacts at the four corners will be used as reinforcing metal fi ttings or signal contacts. There is no difference in the performance or dimensions of the connector. Note 3 : This connector is NOT polarized. 3

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors H = 1.3mm Receptacle A B P=0.4 8 9 1. 0.1 7 1 3 1. d. 1. e v r e s e R s ht g Ri All Recommended PCB layout (H = 1.3mm) D. With metal fittings Without metal fittings T O., L 0.285±0.02 P=0.4±0.02 C±0.02 B±0.02 C P=0.4±0.02 C RI ELECT +0.052.28 0 01.24-0.05 +0.052.28 0 01.48-0.05 E S O 0.2±0.02 R 0.2±0.02 HI 0.43±0.02 8 1 20 With metal fittings Unit : mm ht Part No. HRS No. No. of Contacts A B C g yri BM14EB(1.3)-40DS-0.4V(51) 684-8174-8 51 40 10.48 8.4 7.6 p o C Without metal fittings Unit : mm 8 1 Part No. HRS No. No. of Contacts A B 0 2 BM14EC(1.3)-44DS-0.4V(51) 684-8155-3 51 44 10.48 8.4 1. c. BM14EC(1.3)-54DS-0.4V(51) 684-8157-9 51 54 12.48 10.4 e D Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fi ttings" and "without metal fi ttings" is that the contacts at the four corners will be used as reinforcing metal fi ttings or signal contacts. There is no difference in the performance or dimensions of the connector. Note 3 : This connector is NOT polarized. 4

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Connector for Conductivity Tests A B P=0.4 8 9 1. 0.1 7 6 0.8 0. d. e v r e s e R s ht g Ri All Recommended PCB mounting pattern D. With metal fittings T L O., 0.3±0.02 C±0.02 C 0.4±0.02 C RI T E ELEC 2.28+0.05 0 01.48-0.05 S 0.2±0.02 O R 0.41±0.02 HI 8 1 0 With metal fittings Unit : mm 2 ht Part No. HRS No. No. of Contacts A B C g yri BM14JB-10DS-0.4V(55) 684-8225-7 55 10 4.48 2.4 1.6 p o BM14JB-20DS-0.4V(55) 684-8226-0 55 20 6.48 4.4 3.6 C 8 BM14JB-24DS-0.4V(55) 684-8227-2 55 24 7.28 5.2 4.4 1 0 BM14JB-30DS-0.4V(55) 684-8228-5 55 30 8.48 6.4 5.6 2 1. BM14JB-40DS-0.4V(55) 684-8230-7 55 40 10.48 8.4 7.6 c. e BM14JB-50DS-0.4V(55) 684-8231-0 55 50 12.48 10.4 9.6 D BM14JB-60DS-0.4V(55) 684-8232-2 55 60 14.48 12.4 11.6 Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fi ttings" and "without metal fi ttings" is that the contacts at the four corners will be are used as reinforcing metal fi ttings or signal contacts. There is no difference in the performance or dimensions of the connector. Note 3 : This connector is NOT polarized. 5

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Header A B 8 P=0.4 5 1. 1 0.15 d. e v ser 0.61 e R s ht g Ri Recommended PCB layout All With metal fittings Without metal fittings D. T L 0.285±0.02 C±0.02 B±0.02 O., 0.4±0.02 C P=0.4±0.02 C RI CT +0.05 0 +0.05 0 E 88 88 L 1. 1. E ROSE 0.54 0-0.05 00..2333±±00..0022 00.54-0.05 0.23±0.02 HI 8 With metal fittings Unit : mm 1 0 2 Part No. HRS No. No. of Contacts A B C ht BM14B(0.8)-10DP-0.4V(51) 684-8010-0 51 10 3.66 2.4 1.6 g ri BM14B(0.8)-12DP-0.4V(51) 684-8042-7 51 12 4.06 2.8 2.0 y op BM14B(0.8)-20DP-0.4V(51) 684-8011-3 51 20 5.66 4.4 3.6 C 8 BM14B(0.8)-24DP-0.4V(51) 684-8012-6 51 24 6.46 5.2 4.4 1 BM14B(0.8)-30DP-0.4V(51) 684-8013-9 51 30 7.66 6.4 5.6 0 2 BM14B(0.8)-34DP-0.4V(51) 684-8014-1 51 34 8.46 7.2 6.4 1. c. BM14B(0.8)-40DP-0.4V(51) 684-8015-4 51 40 9.66 8.4 7.6 e D BM14B(0.8)-50DP-0.4V(51) 684-8016-7 51 50 11.66 10.4 9.6 BM14B(0.8)-60DP-0.4V(51) 684-8002-2 51 60 13.66 12.4 11.6 Without metal fittings Unit : mm Part No. HRS No. No. of Contacts A B BM14C(0.8)-14DP-0.4V(51) 684-8025-8 51 14 3.66 2.4 BM14C(0.8)-16DP-0.4V(51) 684-8040-1 51 16 4.06 2.8 BM14C(0.8)-24DP-0.4V(51) 684-8026-0 51 24 5.66 4.4 BM14C(0.8)-28DP-0.4V(51) 684-8027-3 51 28 6.46 5.2 BM14C(0.8)-34DP-0.4V(51) 684-8028-6 51 34 7.66 6.4 BM14C(0.8)-38DP-0.4V(51) 684-8029-9 51 38 8.46 7.2 BM14C(0.8)-44DP-0.4V(51) 684-8030-8 51 44 9.66 8.4 BM14C(0.8)-54DP-0.4V(51) 684-8031-0 51 54 11.66 10.4 BM14C(0.8)-64DP-0.4V(51) 684-8032-3 51 64 13.66 12.4 Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fi ttings" and "without metal fi ttings" is that the contacts at the four corners will be used as reinforcing metal fi ttings or signal contacts. There is no difference in the performance or dimensions of the connector. Note 3 : This connector is NOT polarized. 6

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Embossed Carrier Tape Dimensions : H = 0.8mm (JIS C 0806 Compliant) Receptacle 1 Ø1.5 0+0.1 8±0.1 2±0.1 4±0.1 K 1.75±0. K-K 3 1 ±0.C) ±0. T( B d. ve 0.3 er A± D) s ( e R s ht g 2±0.3 Ri (6) All D. LT J J K Unreeling direction 0.3±0.1 O., J-J 1.1±0.15 C C TRI (2.2) Without pick-and-place tape Unit : mm C Part No. A B C D E F E L BM14B(0.8)-10DS-0.4V(51) 2.58 4.7 E E BM14B(0.8)-12DS-0.4V(51) 2.98 5.1 S 16 7.5 17.5 21.5 O BM14B(0.8)-20DS-0.4V(51) 4.58 6.7 R Reel Dimensions HI BM14B(0.8)-24DS-0.4V(51) 5.38 7.5 8 BM14B(0.8)-30DS-0.4V(51) 6.58 8.7 1 0 2 BM14B(0.8)-34DS-0.4V(51) 7.38 9.5 ht Product label BM14B(0.8)-40DS-0.4V(51) 24 11.5 8.58 10.7 25.5 29.5 Copyrig Ø21±0.8 2±0.5 Ø13±0.2Øfoon1r . b5fea mecdkm me hdeogcleeh sao nfism BBMM1144BB((00..88))--5600DDSS--00..44VV((5511)) 1102..5588 1124..77 8 carrier tape Unit : mm 1 0 ° 2 0 Part No. A B C D E F 1. 12 12 c. 0° ±2 ±1 BM14C(0.8)-14DS-0.4V(51) 2.58 4.7 De Ø380 Ø80 BM14C(0.8)-16DS-0.4V(51) 16 7.5 2.98 5.1 17.5 21.5 BM14C(0.8)-24DS-0.4V(51) 4.58 6.7 BM14C(0.8)-28DS-0.4V(51) 5.38 7.5 BM14C(0.8)-34DS-0.4V(51) 6.58 8.7 BM14C(0.8)-38DS-0.4V(51) 7.38 9.5 E±0.5 BM14C(0.8)-44DS-0.4V(51) 24 11.5 8.58 10.7 25.5 29.5 F±1 BM14C(0.8)-54DS-0.4V(51) 10.58 12.7 BM14C(0.8)-64DS-0.4V(51) 12.58 14.7 7

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Embossed Carrier Tape Dimensions : H = 1.3mm (JIS C 0806 Compliant) Receptacle Reel Dimensions Ø1. 8±0.1 2±0.14±0.1 ±0.1 K-K Product label 5 0+0.1 K 1.75 Ø21±0. 2±0.5 Ø13±0.2Øfo1r. 5fe medm m heoclehsa nism 8 on back edge of carrier tape T±0.3(C)B±0.1 120° 12 A±0.3 (D) 0° Ø380±2 Ø80±1 d. e 2±0.3 v r (6) e s e R J J K 0.3±0.1 E±0.5 hts J-J Unreeling direction 1.49±0.15 F±1 g Ri (2.2) All D. Without pick-and-place tape Unit : mm T L Part No. A B C D E F O., BM14EB(1.3)-40DS-0.4V(51) 24 11.5 8.58 10.7 25.5 29.5 C C Unit : mm RI Part No. A B C D E F T C BM14EC(1.3)-44DS-0.4V(51) 8.58 10.7 E 24 11.5 25.5 29.5 L BM14EC(1.3)-54DS-0.4V(51) 10.58 12.7 E E S O Embossed Carrier Tape Dimensions : Connector for Conductivity Tests (JIS C 0806 Compliant) R HI Receptacle Reel Dimensions 8 1 0 1 Product label yright 2 Ø1.50+0.1 8±0.1 2±0.14±0.1 H 1.75±0. H-H Ø21±0. 2±0.5 Ø13±0.2Øfo1r. 5fe medm m heoclehsa nism p 8 on back edge of o carrier tape C 018 (C)B±0.1 120° 12 ec.1.2 A±0.3 (D) 0° Ø380±2 Ø80±1 D (6) 0.3±0.1 J J H Unreeling direction 1.1±0.15 E±0.5 J-J F±1 (2.2) Without pick-and-place tape Unit : mm Part No. A B C D E F BM14JB-10DS-0.4V(55) 2.58 4.7 BM14JB-20DS-0.4V(55) 16 7.5 4.58 6.7 17.5 21.5 BM14JB-24DS-0.4V(55) 5.38 8.5 BM14JB-30DS-0.4V(55) 6.58 8.7 BM14JB-40DS-0.4V(55) 8.58 10.7 24 11.5 25.5 29.5 BM14JB-50DS-0.4V(55) 10.58 12.7 BM14JB-60DS-0.4V(55) 12.58 14.7 8

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Header 1 Ø1.5 8±0.1 2±0.1 4±0.1 K 75±0. K-K 0+0.1 1. 1 0. 3 ± 0. B T±(C) 3 0. ± A D) d. ( e v r e s e 1.5±0.3 R s (6) ht g Ri 0.3±0.15 All J J K 0.86±0.15 D. J-J Unreeling direction T L O., (1.8) C C RI Without pick-and-place tape Unit : mm T C Part No. A B C D E F E L BM14B(**)-10DP-0.4V(51) – 3.68 E 12 5.5 13.5 17.5 E Reel Dimensions BM14B(**)-12DP-0.4V(51) – 4.28 S O BM14B(**)-20DP-0.4V(51) 2.77 5.88 R 16 7.5 17.5 21.5 HI BM14B(**)-24DP-0.4V(51) 3.57 6.68 8 Product label BM14B(**)-30DP-0.4V(51) 4.77 7.88 1 ght 20 Ø21±0. 2±0.5 Ø13±0.2Øfo1r. 5fe medm m heoclehsa nism BBMM1144BB((****))--4304DDPP--00..44VV((5511)) 24 11.5 56..5777 89..6888 25.5 29.5 yri 8 ocanr rbiearc kta epdege of BM14B(**)-50DP-0.4V(51) 8.77 11.88 p o C ° BM14B(**)-60DP-0.4V(51) 10.77 13.88 0 1.2018 12 120° Ø380±2 Ø80±1 Part No. A B C D UEnit : mFm c. BM14C(**)-14DP-0.4V(51) – 3.68 e 12 5.5 13.5 17.5 D BM14C(**)-16DP-0.4V(51) – 4.28 BM14C(**)-24DP-0.4V(51) 2.77 5.88 16 7.5 17.5 21.5 BM14C(**)-28DP-0.4V(51) 3.57 6.68 E±0.5 BM14C(**)-34DP-0.4V(51) 4.77 7.88 F±1 BM14C(**)-38DP-0.4V(51) 5.57 8.68 BM14C(**)-44DP-0.4V(51) 24 11.5 6.77 9.88 25.5 29.5 BM14C(**)-54DP-0.4V(51) 8.77 11.88 BM14C(**)-64DP-0.4V(51) 10.77 13.88 9

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Usage Recommendations 1. Recommended solder profi le Temperature(ç) 250 250ç 220ç 200 Maximum of 60 seconds 180ç 150 150ç d. 100 90 to 120 sec e v r e s e 50 R s Room ht temperature g Ri 0 50 100 150 200 250 300 All Heating time (sec) D. LT 【Conditions】 O., 1. Peak temperature : 250°C 2. Heating part : 220°C or more, 60 seconds or less C C 3. Preheating part : 150 to 180°C, 90 to 120 seconds RI 4. Cycle : Maximum of 2 cycles T Note 1 : The temperatures indicated are the surface temperatures of a printed circuit C E board at the points of contact with the terminals. L E E 2. Recommended manual soldering Manual soldering : 340 ±10°C for 3 seconds S O R H = 0.8mm for DP and DS HI Thickness : 0.1mm 8 3. Recommended screen thickness 1 Open area ratio : DP 0.1mm 95%, DS 0.1mm 95% 0 and open area ratio (Pattern area 2 H = 1.3mm for DP and DS ht ratio) Thickness : 0.1mm g ri Open area ratio : DP 0.1mm 95%, DS 0.1mm 95% y p o Maximum of 0.02mm at the connector center, with both ends of the connector as C 4. Board warpage reference points 8 1 Cleaning is not recommended for this connector. Cleaning agents can deteriorate the 0 5. Cleaning conditions 2 mechanical operation and the environmental resistance of this connector. 1. c. De 6. Precautions ■ Do not mate or unmate these connectors until they are mounted, failure to follow this precaution can lead to deformation or damage to these connectors. ■ Provide another form of support to the PCB, this connector was not designed to be the main form of support. ■ When mating/un-mating, do not twist or lift by the corners. It may cause damage or deformation. ■ Do not apply excessive amounts of fl ux as it may cause excess solder and fl ux wicking. ■ There may be a slight variance in the color of the molding between production lots, this variance will not affect the performance of the connector. ■ Refer to the next page for the handling precautions when mating and unmating the connectors. ■ If the connector becomes disconnected due to impact, a fall or a counterforce to the FPC, it may be necessary to hold the connector in place with an addition to the device’s case or other cushioning material to hold the connector in place. 10

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Handling precautions when mating BM14＃(※※)-＊＊DP-0.4V d. BM14＃(※※)-＊＊DS-0.4V e v r e s e R s ht g Ri All D. T L O., C C RI T C E L E E S O Prior to mating, locate the guide ribs and align the header. R HI Do not apply excessive force during the mating process as 8 it may damage the contacts. 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D Once aligned, the position of the connector will drop down slightly. Make sure that the connector is square to the other side, then press it down until it is fully mated. 11

BM14 Series●0.4mm Contact Pitch Board-to-FPC Connectors Handling precautions for unmating BM14＃(※※)-＊＊DP-0.4V BM14＃(※※)-＊＊DS-0.4V d. e v r e s e R s To unmate this connector, lift evenly across the header. ht Make sure that each side of the connector stays parallel to g Ri the other. All D. T L O., C C RI If circumstances prevent the connectors from staying T parallel to each other, then one side may be lifted as C E shown in the diagram. This method is only approved L if the connector is mounted onto an extremely rigid E E circuit board. If the board were to warp during this S process it may result in damage to the connector or its O R solder joints. HI 8 1 0 2 ht Do not try to disconnect these connectors by g pulling on one side or a single corner, or to unmate ri py it when it is hasn’t been securely mounted onto a o C rigid FPC. These actions may lead to deformities 8 and ultimately a damaged connector. Prior to the 1 mounting of these connectors we recommend that 0 2 you check the rigidity of your FPC to ensure that 1. c. it meets the standards needed to support these e D connectors. If the FPC is not strong enough, there is a risk that the connector could break as illustrated in the diagram to the left. Proper testing and checks must be made with the customers FPC to determine if the FPC stiffener has sufficient rigidity. Evaluative reports of FPC rigidity and other items are available. ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 12 The contents of this catalog are current as of date of 01/2018. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H irose Electric: BM14EC-54DP-0.4V(51) BM14EC(1.3)-54DS-0.4V(51) BM14C(0.8)-38DP-0.4V(51) BM14C(0.8)-28DP-0.4V(51) BM14C(0.8)-38DS-0.4V(51) BM14C(0.8)-28DS-0.4V(51)