Model BD0810J50100AHF Rev E Ultra Low Profile 0805 BPaRElLIuMINnARY 50Ω to 100Ω Balanced Description The BD0810J50100AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering the GSM frequency. The BD0810J50100AHF is ideal for high volume manufacturing and is higher performance than traditional ceramic and lumped element baluns. The BD0810J50100AHF has an unbalanced port impedance of 50 and a 100 balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD0810J50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features: Parameter Min. Typ. Max Min. Typ. Max Unit  700 – 1600 MHz Frequency 800 1000 700 1600 MHz  0.8mm Height Profile Unbalanced Port Impedance 50 50 Ω  50 Ohm to 2 x 50 Ohm Balanced Port Impedance 100 100 Ω  GSM  Low Insertion Loss Return Loss 13 15 11 14 dB  Input to Output DC Insertion Loss* 0.70 0.95 0.9 1.2 dB Isolation Amplitude Balance 0.2 0.4 0.3 0.6 dB  Surface Mountable Phase Balance 1 2 1 3 Degrees  Tape & Reel CMRR 39 35 dB  Non-conductive Surface Power Handling @85C 2 2 Watts  RoHS Compliant Power Handling @105C 1.2 1.2 Watts  Halogen Free DC Current Rating 300 300 mA Operating Temperature -55 +105 -55 +105 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 2.04±0.10 0.76±0.08 1 2 3 2x 0.15 1.29±0.10 6x 0.98 6x 0.22 6 5 4 Orientation Marker 6x Orientation Marker Denotes Pin Location 0.30 Denotes Pin Location 4x 0.65 PinDesignation 1 In 2 GND/DC Feed +RF GND Mechanical Outline 3 Out 1 -Dimensions are in Millimeters 4 Out 2 -Tolerences are Non-Cumulative 5 GND 6 NC USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 www.anaren.com Europe: +44 2392-232392 Asia: +86 512-62749282

Model BD0810J50100AHF Rev E Typical Broadband Performance: 0.01 GHz. to 8.01 GHz. Differential insertion loss Return Loss 0 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 B] -18 B] -1.8 d d [ -21 [ -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 -36 -3.6 0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01 0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01 Freq [GHz] Freq [GHz] Phase balance Amplitude Balance 20 2 1.5 15 1 10 0.5 5 e] ] e dB 0 gr 0 [ e d -0.5 [ -5 -1 -10 -1.5 -15 -2 -20 0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01 0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01 Freq [GHz] Freq [GHz] CMRR 0 -5 -10 -15 -20 ] B -25 d [ -30 -35 -40 -45 -50 0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01 Freq [GHz] USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 www.anaren.com Europe: +44 2392-232392 Asia: +86 512-62749282

Model BD0810J50100AHF Rev E Typical Performance: 600 MHz to 1800 MHz PRELIMINARY Return Loss Differential insertion loss 0 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 B] -18 B]-1.8 d d [ -21 [-2.1 -24 -2.4 -27 -2.7 -30 -3 -3.3 -33 -3.6 -36 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Freq [GHz] Freq [GHz] Amplitude Balance Phase balance 2 20 1.5 15 1 10 0.5 5 e] ] e dB 0 gr 0 [ e d -0.5 [ -5 -1 -10 -1.5 -15 -20 -2 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Freq [GHz] Freq [GHz] CMRR 0 -5 -10 -15 -20 ] dB -25 [ -30 -35 -40 -45 -50 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Freq [GHz] USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 www.anaren.com Europe: +44 2392-232392 Asia: +86 512-62749282

Model BD0810J50100AHF Rev E Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. No Bias Footprint DC Bias Footprint Circuit Pattern Dimensions are in Millimeters Circuit Pattern Dimensions are in Millimeters Mounting Footprint Plated thru Mounting Footprint Footprint Pad (s) Footprint Pad (s) holes to ground Solder Resist Solder Resist Capacitor 6x .41 4x .25 Plated thru holes to ground 6x .41 DC Bias 3x Transmission 3x Transmission lines lines .04 .04 6x .33 6x .33 .66 .66 PART ORIENTATION PART ORIENTATION TOP DOWN TOP DOWN Plated thru Plated thru holes to 4x .25 holes to ground ground USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 www.anaren.com Europe: +44 2392-232392 Asia: +86 512-62749282

Model BD0810J50100AHF Rev E Packaging and Ordering Information PRELIMINARY Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. USA/Canada: (315) 432-8909 Visit us at Toll Free: (800) 411-6596 www.anaren.com Europe: +44 2392-232392 Asia: +86 512-62749282

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A naren: BD0810J50100AHF