BAT54W series Schottky barrier diodes Rev. 3 — 20 November 2012 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier diodes with an integrated guard ring for stress protection, encapsulated in a very small SOT323 (SC-70) Surface-MountedDevice (SMD) plastic package. 1.2 Features and benefits  Low forward voltage  Low capacitance  AEC-Q101qualified 1.3 Applications  Ultra high-speed switching  Voltage clamping  Line termination  Reverse polarity protection 1.4 Quick reference data Table 1. Quick reference data T =25C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit Per diode V reverse voltage - - 30 V R V forward voltage I =100mA [1] - - 800 mV F F I reverse current V =25V [1] - - 2 A R R [1] Pulse test: tp300s; 0.02. 2. Pinning information Table 2. Pinning Pin Description Simplified outline Graphic symbol BAT54W 1 anode 3 3 2 not connected 3 cathode 1 2 n.c. 006aaa436 1 2

BAT54W series Nexperia Schottky barrier diodes Table 2. Pinning …continued Pin Description Simplified outline Graphic symbol BAT54AW 1 cathode (diode 1) 3 3 2 cathode (diode 2) 3 common anode 1 2 006aaa439 1 2 BAT54CW 1 anode (diode 1) 3 3 2 anode (diode 2) 3 common cathode 1 2 006aac984 1 2 BAT54SW 1 anode (diode 1) 3 3 2 cathode (diode 2) 3 cathode (diode 1), 1 2 anode(diode 2) 006aaa437 1 2 3. Ordering information Table 3. Ordering information Type number Package Name Description Version BAT54W series SC-70 plastic surface-mounted package; 3leads SOT323 4. Marking Table 4. Marking codes Type number Marking code[1] BAT54W L4* BAT54AW 42* BAT54CW 43* BAT54SW 44* [1] * = placeholder for manufacturing site code. BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 2 of 11

BAT54W series Nexperia Schottky barrier diodes 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit Per diode V reverse voltage - 30 V R I forward current - 200 mA F I repetitive peak forward t 1s; 0.5 300 mA FRM p current I non-repetitive peak square wave; [1] - 600 mA FSM forward current t <10ms p Per device; one diode loaded P total power dissipation T 25C [2] - 200 mW tot amb T junction temperature - 150 C j T ambient temperature 55 +150 C amb T storage temperature 65 +150 C stg [1] Tj=25C before surge. [2] Device mounted on an FR4Printed-Circuit Board(PCB), single-sided copper, tin-plated and standard footprint. 6. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Per device; one diode loaded R thermal resistance from in free air [1] - - 625 K/W th(j-a) junction to ambient [1] Device mounted on an FR4PCB, single-sided copper, tin-plated and standard footprint. BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 3 of 11

BAT54W series Nexperia Schottky barrier diodes 7. Characteristics Table 7. Characteristics T =25C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit Per diode V forward voltage [1] F I =0.1mA - - 240 mV F I =1mA - - 320 mV F I =10mA - - 400 mV F I =30mA - - 500 mV F I =100mA - - 800 mV F I reverse current V =25V [1] - - 2 A R R C diode capacitance f=1MHz; V =1V - - 10 pF d R t reverse recovery time [2] - - 5 ns rr [1] Pulse test: tp300s; 0.02. [2] When switched from IF=10mA to IR=10mA; RL=100; measured at IR=1mA. 103 006aac829 (cid:10)(cid:7)(cid:8)  IF (3) (cid:11)(cid:3) (cid:5)(cid:10)(cid:6) (mA) (1) (cid:5)(cid:12)(cid:13)(cid:6) (2) 102 (cid:10)(cid:7)(cid:9) (cid:5)(cid:9)(cid:6) 10 (cid:10)(cid:7) (1) (2) (3) 1 (cid:10) (cid:5)(cid:8)(cid:6) 10-1 (cid:10)(cid:7)(cid:14)(cid:10) 0.0 0.4 0.8 1.2 (cid:7) (cid:10)(cid:7) (cid:9)(cid:7) (cid:8)(cid:7) VF (V) (cid:2)(cid:3)(cid:4)(cid:5)(cid:2)(cid:6) (1) Tamb=125C (1) Tamb=125C (2) Tamb=85C (2) Tamb=85C (3) Tamb=25C (3) Tamb=25C Fig 1. Forward current as a function of forward Fig 2. Reverse current as a function of reverse voltage; typical values voltage; typical values BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 4 of 11

BAT54W series Nexperia Schottky barrier diodes 006aac891 10 Cd (pF) 8 6 4 2 0 0 10 20 30 VR (V) f=1MHz; Tamb=25C Fig 3. Diode capacitance as a function of reverse voltage; typical values 8. Test information tr tp t D.U.T. 10 % RS = 50 Ω IF SAMPLING + IF trr t OSCILLOSCOPE V = VR + IF × RS Ri = 50 Ω 90 % (1) VR mga881 input signal output signal (1) I =1mA R Fig 4. Reverse recovery time test circuit and waveforms 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 5 of 11

BAT54W series Nexperia Schottky barrier diodes 9. Package outline 2.2 1.1 1.8 0.8 3 0.45 0.15 2.2 1.35 2.0 1.15 1 2 0.4 0.25 0.3 0.10 1.3 Dimensions in mm 04-11-04 Fig 5. Package outline SOT323 (SC-70) 10. Packing information Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package Description Packing quantity 3000 10000 BAT54W series SOT323 4mm pitch, 8mm tape and reel -115 -135 [1] For further information and the availability of packing methods, see Section14. BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 6 of 11

BAT54W series Nexperia Schottky barrier diodes 11. Soldering 2.65 1.85 1.325 solder lands 2 solder resist 2.35 (03.×6) 3 1.3 solder paste 0.5 occupied area 1 (3×) Dimensions in mm 0.55 (3×) sot323_fr Fig 6. Reflow soldering footprint SOT323 (SC-70) 4.6 2.575 1.425 (3×) solder lands solder resist occupied area 3.65 2.1 1.8 Dimensions in mm preferred transport 09 (2×) direction during soldering sot323_fw Fig 7. Wave soldering footprint SOT323 (SC-70) BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 7 of 11

BAT54W series Nexperia Schottky barrier diodes 12. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes BAT54W_SER v.3 20121120 Product data sheet - BAT54W v.2 Modifications: • The format of this document has been redesigned to comply with the new identity guidelines of NXP Sem.iconductors • Legal texts have been adapted to the new company name where appropriate. • Section1: updated • Section4: updated • Table5: updated ambient temperature T maximum value to 150 C amb • Figure1 to 4: updated • Section 8 “Test information”: added • Figure5: replaced by minimized package outline drawing • Section 10 “Packing information”: added • Section 11 “Soldering”: added • Section 13 “Legal information”: updated BAT54W v.2 19960319 Product specification - BAT54W v.1 BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 8 of 11

BAT54W series Nexperia Schottky barrier diodes 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URLhttp://www.nexperia.com. 13.2 Definitions Suitability for use in automotive applications — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, Draft — The document is a draft version only. The content is still under authorized or warranted to be suitable for use in life support, life-critical or internal review and subject to formal approval, which may result in safety-critical systems or equipment, nor in applications where failure or modifications or additions. Nexperia does not give any malfunction of a Nexperia product can reasonably be expected representations or warranties as to the accuracy or completeness of to result in personal injury, death or severe property or environmental information included herein and shall have no liability for the consequences of damage. Nexperia and its suppliers accept no liability for use of such information. inclusion and/or use of Nexperia products in such equipment or Short data sheet — A short data sheet is an extract from a full data sheet applications and therefore such inclusion and/or use is at the customer's own with the same product type number(s) and title. A short data sheet is intended risk. for quick reference only and should not be relied upon to contain detailed and Applications — Applications that are described herein for any of these full information. For detailed and full information see the relevant full data products are for illustrative purposes only. Nexperia makes no sheet, which is available on request via the local Nexperia sales representation or warranty that such applications will be suitable for the office. In case of any inconsistency or conflict with the short data sheet, the specified use without further testing or modification. full data sheet shall prevail. Customers are responsible for the design and operation of their applications Product specification — The information and data provided in a Product and products using Nexperia products, and Nexperia data sheet shall define the specification of the product as agreed between accepts no liability for any assistance with applications or customer product Nexperia and its customer, unless Nexperia and design. It is customer’s sole responsibility to determine whether the Nexperia customer have explicitly agreed otherwise in writing. In no event however, product is suitable and fit for the customer’s applications and shall an agreement be valid in which the Nexperia product is products planned, as well as for the planned application and use of deemed to offer functions and qualities beyond those described in the customer’s third party customer(s). Customers should provide appropriate Product data sheet. design and operating safeguards to minimize the risks associated with their applications and products. 13.3 Disclaimers Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s Limited warranty and liability — Information in this document is believed to third party customer(s). Customer is responsible for doing all necessary be accurate and reliable. However, Nexperia does not give any testing for the customer’s applications and products using Nexperia representations or warranties, expressed or implied, as to the accuracy or products in order to avoid a default of the applications and completeness of such information and shall have no liability for the the products or of the application or use by customer’s third party consequences of use of such information. Nexperia takes no customer(s). Nexperia does not accept any liability in this respect. responsibility for the content in this document if provided by an information source outside of Nexperia. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC60134) will cause permanent In no event shall Nexperia be liable for any indirect, incidental, damage to the device. Limiting values are stress ratings only and (proper) punitive, special or consequential damages (including - without limitation - lost operation of the device at these or any other conditions above those given in profits, lost savings, business interruption, costs related to the removal or the Recommended operating conditions section (if present) or the replacement of any products or rework charges) whether or not such Characteristics sections of this document is not warranted. Constant or damages are based on tort (including negligence), warranty, breach of repeated exposure to limiting values will permanently and irreversibly affect contract or any other legal theory. the quality and reliability of the device. Notwithstanding any damages that customer might incur for any reason Terms and conditions of commercial sale — Nexperia whatsoever, Nexperia’s aggregate and cumulative liability towards products are sold subject to the general terms and conditions of commercial customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual Right to make changes — Nexperia reserves the right to make agreement is concluded only the terms and conditions of the respective changes to information published in this document, including without agreement shall apply. Nexperia hereby expressly objects to limitation specifications and product descriptions, at any time and without applying the customer’s general terms and conditions with regard to the notice. This document supersedes and replaces all information supplied prior purchase of Nexperia products by customer. to the publication hereof. BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 9 of 11

BAT54W series Nexperia Schottky barrier diodes No offer to sell or license — Nothing in this document may be interpreted or Quick reference data — The Quick reference data is an extract of the construed as an offer to sell products that is open for acceptance or the grant, product data given in the Limiting values and Characteristics sections of this conveyance or implication of any license under any copyrights, patents or document, and as such is not complete, exhaustive or legally binding. other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein 13.4 Trademarks may be subject to export control regulations. Export might require a prior authorization from competent authorities. Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com BAT54W_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 3 — 20 November 2012 10 of 11

BAT54W series Nexperia Schottky barrier diodes 15. Contents 1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 General description . . . . . . . . . . . . . . . . . . . . . 1 1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1 1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1 3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2 4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 5 8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 5 9 Package outline. . . . . . . . . . . . . . . . . . . . . . . . . 6 10 Packing information . . . . . . . . . . . . . . . . . . . . . 6 11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8 13 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9 13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9 13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 14 Contact information. . . . . . . . . . . . . . . . . . . . . 10 15 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 20 November 2012