SMT inductors SIMID series, SIMID 0603-C Series/Type: B82496C Date: October 2019 aa~~íí~~==ppÜÜÉÉÉÉíí (cid:164)(cid:3)TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics’ prior express consent is prohibited.

SMT inductors, SIMID series B82496C SIMID 0603-C Size 0603 (EIA) and/or 1608 (IEC) Rated inductance 1 ... 220 nH Rated current 110 ... 1800 mA Construction ■ Copper-plated ceramic core ■ Laser-cut winding, epoxy-coated Features ■ Temperature range up to +150 °C ■ High resonance frequency ■ Close inductance tolerance ■ Free of polarization effect ■ High mechanical stability ■ Qualified to AEC-Q200 ■ Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020D ■ RoHS-compatible Applications Resonant circuits, impedance matching for ■ Multimedia ■ Car access systems ■ Wireless communication systems ■ TPMS (Tire Pressure Monitoring System) ■ GPS (Global Positioning System) ■ Digital cameras Terminals ■ Base material Al O ceramic with Cu layer 2 3 ■ Layer composition Ni, Sn (lead-free) ■ Electro-plated Marking ■ No marking on component ■ Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing unit ■ 8-mm cardboard tape, wound on 180-mm (cid:135) reel ■ Packing unit: 4000 pcs./reel Please read Cautions and warnings and 2 10/19 Important notes at the end of this document.

SMT inductors, SIMID series B82496C SIMID 0603-C Dimensional drawing and layout recommendation A B C 0.8 (cid:114)0.1 2.3 (cid:114)0.3 0.9 (cid:114)0.1 Dimensions in mm Taping and packing Cardboard tape Reel Dimensions in mm Please read Cautions and warnings and 3 10/19 Important notes at the end of this document.

SMT inductors, SIMID series B82496C SIMID 0603-C Technical data and measuring conditions Rated inductance L Measured with impedance analyzer Agilent 4291A R and test fixture Agilent 16196A or equivalent at frequency f , 0.1 V, +20 °C L Q factor Q , Q Measured with impedance analyzer Agilent 4291A min typ and test fixture Agilent 16196A or equivalent, Q measured at frequency f , +20 °C min Q Rated temperature T +125 (cid:113)C R Rated current I Maximum permissible DC with a temperature increase R of (cid:100) 15 K at rated temperature Self-resonance frequency f Measured with network analyzer Agilent 8720D or res,min equivalent, +20 °C DC resistance R Measured at +20 °C max Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 (cid:114)5) °C, (5 (cid:114)0.3) s Wetting of soldering area (cid:116) 95% (based on IEC 60068-2-58) Resistance to soldering heat +260 (cid:113)C, 40 s (as referenced in JEDEC J-STD 020D) Climatic category 55/150/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +150 °C Packaged: –25 °C … +40 °C, (cid:100) 75% RH Weight Approx. 4 mg Please read Cautions and warnings and 4 10/19 Important notes at the end of this document.

SMT inductors, SIMID series B82496C SIMID 0603-C Characteristics and ordering codes L Tolerance Q Q f ;f I R f Ordering code1) R min typ L Q R max res,min (at (reel packing) nH 800 MHz) MHz mA (cid:58) GHz 1.0 (cid:114)0.3 nH ^ A 7 60 100 1800 0.02 16 B82496C3109+000 1.2 (cid:114)0.2 nH ^ Z 8 60 100 1800 0.025 15 B82496C3129+000 1.5 8 50 100 1500 0.03 13 B82496C3159+000 1.8 12 50 100 1500 0.033 12 B82496C3189+000 2.2 14 50 100 1500 0.035 10 B82496C3229+000 2.7 14 40 100 1400 0.04 10 B82496C3279+000 3.3 14 40 100 1200 0.06 9 B82496C3339+000 3.9 (cid:114)5% ^ J 14 40 100 1100 0.065 8 B82496C3399+000 4.7 (cid:114)0.2 nH ^ Z 14 40 100 800 0.10 7 B82496C3479+000 5.6 14 40 100 700 0.15 6 B82496C3569+000 6.8 14 40 100 700 0.15 6 B82496C3689+000 8.2 14 40 100 650 0.18 6 B82496C3829+000 10 (cid:114)5% ^ J 14 40 100 600 0.20 5 B82496C3100+000 12 (cid:114)2% ^ G 14 40 100 450 0.35 5 B82496C3120+000 15 14 40 100 420 0.40 4.5 B82496C3150+000 18 14 40 100 400 0.45 4.0 B82496C3180+000 22 14 40 100 380 0.50 4.0 B82496C3220+000 27 14 35 100 360 0.55 3.0 B82496C3270+000 33 14 35 100 350 0.60 3.0 B82496C3330+000 39 14 35 100 300 0.80 2.5 B82496C3390+000 47 14 35 100 270 0.95 2.5 B82496C3470+000 56 14 35 100 250 1.2 2.5 B82496C3560+000 68 14 35 100 230 1.3 2.0 B82496C3680+000 82 14 35 100 220 1.5 2.0 B82496C3820+000 100 14 30 100 200 1.8 1.8 B82496C3101+000 120 5 30 25.2 160 3.0 1.8 B82496C3121+000 150 5 30 25.2 130 5.0 1.6 B82496C3151+000 180 4 25 25.2 120 6.0 1.4 B82496C3181+000 220 4 25 25.2 110 7.0 1.3 B82496C3221+000 Special versions on request. Higher currents possible at temperatures <T on request. R Sample kit available (see also chapter “Sample kits”. Ordering code: B82496X001 1) Replace the + by the code letter for the required inductance tolerance. Please read Cautions and warnings and 5 10/19 Important notes at the end of this document.

SMT inductors, SIMID series B82496C SIMID 0603-C Impedance |Z| versus frequency f Inductance L versus DC load current I DC measured with impedance analyzer measured with LCR meter Agilent 4275A, Agilent 4291A/16196A, typical values at +20 °C typical values at +20 °C Q factor versus frequency f Current derating I /I op R measured with impedance analyzer versus ambient temperature T A Agilent 4291A/16196A, typical values at +20 °C (rated temperature T = +125 °C) R Please read Cautions and warnings and 6 10/19 Important notes at the end of this document.

Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire, wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. – Many coating materials have a negative effect (chemically and mechanically) on the winding wires, insulation materials and connecting points. Customers are always obligated to determine whether and to what extent their coating materials influence the component. Customers are responsible and bear all risk for the use of the coating material. TDK Electronics does not assume any liability for failures of our components that are caused by the coating material. ■ Ceramics / ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Display of ordering codes for TDK Electronics products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. Please read Cautions and warnings and 7 10/19 Important notes at the end of this document.

Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical require- ments that are often placed on our products in the areas of application concerned. We never- theless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, we are either unfamiliar with individual customer applications or less familiar with them than the cus- tomers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or fail- ure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the mal- function or failure of an electronic component could endanger human life or health (e.g. in acci- dent prevention or life-saving systems), it must therefore be ensured by means of suitable de- sign of the customer application or other action taken by the customer (e.g. installation of pro- tective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this pub- lication may contain substances subject to restrictions in certain jurisdictions (e.g. be- cause they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequent- ly, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 8 10/19

Important notes 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality manage- ment system in the automotive industry. Referring to customer requirements and customer spe- cific requirements (“CSR”) TDK always has and will continue to have the policy of respecting in- dividual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral re- quirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other coun- tries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10 9 10/19

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: E PCOS / TDK: B82496C3100J B82496C3101J B82496C3109A B82496C3120J B82496C3121J B82496C3129A B82496C3150J B82496C3151J B82496C3159A B82496C3180J B82496C3181J B82496C3189A B82496C3220J B82496C3221J B82496C3229A B82496C3270J B82496C3279A B82496C3330J B82496C3339A B82496C3390J B82496C3399J B82496C3470J B82496C3479J B82496C3560J B82496C3569J B82496C3680J B82496C3689J B82496C3820J B82496C3829J B82496C3429J000 B82496C3680J8 B82496C3221J8 B82496C3560J8 B82496C3180J8 B82496C3180J008 B82496C3221J008 B82496C3560J008 B82496C3680J008