Inductors VHF chokes Series/Type: B82131, B82132, B82133, B82134 Date: June 2012 DDaattaa SShheeeett  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

VHF chokes B82131 … B82134 Rated voltage 500 V AC/DC Rated current 0.15 ... 6 A Rated inductance 1 ... 420 μH Construction ■ Cylinder core of carbonyl iron ■ Winding: single-layer, enamel copper wire ■ Polyester insulating sleeve Features ■ High resonant frequency ■ Design complies with EN 60938 ■ Suitable for wave soldering ■ RoHS-compatible Applications ■ RF blocking and filtering ■ Interference suppression in small appliances ■ Decoupling in telecommunications and entertainment electronics Terminals ■ Central axial leads ■ Base material Cu ■ Hot-dip tinned with pure tin Marking L and I in clear text R R Delivery mode and packing units ■ Taped and reeled ■ Packing units: Series Pcs./reel B82131, B82132 2000 B82133, B82134 1000 Please read Cautions and warnings and 2 06/12 Important notes at the end of this document.

VHF chokes B82131 … B82134 Dimensional drawing _ 73 1 9±0.5 l max. ax. m 8 d 0. ø e min. 5 *)±0. IND0145-U 0 1 5 *)±0. Lead spacing Type 10 e (mm) min 17.5 B82131 x. k max. ma 22.5 B82132 2 27.5 B82133 1. *)Tolerance over 10 spacings ±2 mm IND0144-Z-E 32.5 B82134 Dimensions in mm Reel packing 5 1 0. ± 5 0. 30 _1 ø3 +1 3 0 6 3 6 2 1 3 1 ø ø ø Label 95+1 30 107 max. IND0451-4-E Dimensions in mm Please read Cautions and warnings and 3 06/12 Important notes at the end of this document.

VHF chokes B82131 … B82134 Technical data and measuring conditions Test voltage V 2500 V AC, 1 min test Rated inductance L Measured with LCR meter Agilent 4284A R or impedance analyzer Agilent 4294A Measuring frequency: L (cid:100) 10 (cid:80)H = 1 MHz R 10 (cid:80)H < L (cid:100) 1000 (cid:80)H = 100 kHz R Measuring voltage: 1 V Measuring temperature: +20 °C Inductance tolerance (cid:114)20% Rated temperature T +60 °C R Rated current I Maximum permissible DC current at rated temperature R DC resistance R Measured at +20 (cid:113)C, tolerance (cid:114)20%, typical values typ Resonance frequency f Measured with Agilent 4294A or 8753ES, +20 °C, res tolerance (cid:114)30% Solderability (lead-free) Sn95.5Ag3.8Cu0.7: +(245 (cid:114)5) °C, (3 (cid:114)0.3) s Wetting of soldering area (cid:116)(cid:3)90% (to IEC 60068-2-20, test Ta) Resistance to soldering heat +(260 (cid:114)5) (cid:113)C, 10 s (wave soldering) (to IEC 60068-2-20, test Tb) Tensile strength of leads (cid:116)(cid:3)30 N (to IEC 60068-2-21, test Ua) Climatic category 55/125/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +125 °C Packaged: –25 °C … +40 °C, (cid:100)(cid:3)75% RH Mounting information When bending the leads, take care that the bending point is at least 3 mm apart from the face ends of the core and that the start-of-winding areas are not subjected to any mechanical stress. Please read Cautions and warnings and 4 06/12 Important notes at the end of this document.

VHF chokes B82131 … B82134 Characteristics and ordering codes I L R f Dimensions (mm) Approx. Ordering code R R typ res weight A (cid:80)H (cid:58) MHz dmax lmax kmax emin g 0.15 80 11 22 5 15 16.4 17.5 0.8 B82131A5151M000 160 17 20 5.5 20 21.4 22.5 0.9 B82132A5151M000 350 21 11 7.5 25 26.4 27.5 2.3 B82133A5151M000 420 19 12 7.5 30 31.4 32.5 2.6 B82134A5151M000 0.3 40 4.1 31 5 15 16.4 17.5 0.8 B82131A5301M000 70 5.7 29 5.5 20 21.4 22.5 0.9 B82132A5301M000 160 6.5 16 7.5 25 26.4 27.5 2.2 B82133A5301M000 210 6.4 18 7.5 30 31.4 32.5 2.8 B82134A5301M000 0.4 27 2.0 40 5 15 16.4 17.5 0.8 B82131A5401M000 50 3.0 37 5.5 20 21.4 22.5 1.0 B82132A5401M000 130 4.8 18 7.5 25 26.4 27.5 2.8 B82133A5401M000 150 3.5 18 7.5 30 31.4 32.5 2.8 B82134A5401M000 0.7 14 0.76 53 5 15 16.4 17.5 0.8 B82131A5701M000 23 0.73 55 5.5 20 21.4 22.5 1.0 B82132A5701M000 55 1.20 26 7.5 25 26.4 27.5 2.4 B82133A5701M000 60 0.77 34 7.5 30 31.4 32.5 3.0 B82134A5701M000 1.5 6 0.19 84 5 15 16.4 17.5 0.8 B82131A5152M000 8 0.16 90 5.5 20 21.4 22.5 1.1 B82132A5152M000 25 0.32 40 7.5 25 26.4 27.5 2.5 B82133A5152M000 30 0.30 44 7.5 30 31.4 32.5 3.2 B82134A5152M000 2 3 0.09 113 5 15 16.4 17.5 0.8 B82131A5202M000 6 0.11 108 5.5 20 21.4 22.5 1.1 B82132A5202M000 14 0.13 57 7.5 25 26.4 27.5 2.8 B82133A5202M000 20 0.15 59 7.5 30 31.4 32.5 3.3 B82134A5202M000 3 2 0.038 147 5 15 16.4 17.5 1.0 B82131A5302M000 3 0.035 151 5.5 20 21.4 22.5 1.2 B82132A5302M000 10 0.077 69 7.5 25 26.4 27.5 2.9 B82133A5302M000 12 0.090 75 7.5 30 31.4 32.5 3.5 B82134A5302M000 4 1 0.014 199 5 15 16.4 17.5 1.1 B82131A5402M000 2 0.020 186 5.5 20 21.4 22.5 1.4 B82132A5402M000 5 0.034 87 7.5 25 26.4 27.5 3.0 B82133A5402M000 Please read Cautions and warnings and 5 06/12 Important notes at the end of this document.

VHF chokes B82131 … B82134 Impedance |Z| versus frequency f measured with impedance analyzer Agilent 4294A or S-parameter network analyzer Agilent 8753ES, typical values at +20 °C B82131A5***M000 B82132A5***M000 106 IND0146-1 106 IND0147-5 B82131 Ω B82132 Ω A5151 |Z| |Z| 105 105 A5301 A5151 A5401 A5301 A5401 104 104 103 103 102 102 A5701 A5701 A5152 A5152 A5202 A5202 101 A5302 101 A5302 A5402 A5402 100 100 106 107 108 Hz 109 106 107 108 Hz 109 f f B82133A5***M000 B82134A5***M000 106 IND0148-6 106 IND0149-9 Ω B82133 B82134 Ω |Z| |Z| 105 105 104 104 103 103 A5151 A5151 A5301 A5301 102 A5401 102 A5401 A5701 A5701 A5152 A5152 A5202 A5202 101 A5302 101 A5302 A5402 100 100 106 107 108 Hz 109 106 107 108 Hz 109 f f 6 06/12

VHF chokes B82131 … B82134 Current derating I /I op R versus ambient temperature T A (rated temperature T = +60 °C) R IND0143-T-E 1.2 I op I R 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 ˚C 140 T A 7 06/12

Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. ■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Please read Cautions and warnings and 8 06/12 Important notes at the end of this document.

Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk- electronics.tdk.com/trademarks. Release 2018-10 9 06/12

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: E PCOS / TDK: B82131A5151M B82131A5152M B82131A5202M B82131A5301M B82131A5302M B82131A5401M B82131A5402M B82131A5701M B82132A5151M B82132A5152M B82132A5202M B82132A5301M B82132A5302M B82132A5401M B82132A5402M B82132A5701M B82133A5151M B82133A5152M B82133A5202M B82133A5301M B82133A5302M B82133A5401M B82133A5402M B82133A5701M B82134A5151M B82134A5152M B82134A5202M B82134A5301M B82134A5302M B82134A5401M B82134A5701M