Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32520 ... B32529 Date: June 2018 ©EPCOSAG2018.Reproduction,publicationanddisseminationofthispublication,enclosuresheretoandthe informationcontainedthereinwithoutEPCOS'priorexpressconsentisprohibited. EPCOSAGisaTDKGroupCompany.

Metallized polyester film capacitors (MKT) B32520 ... B32529 General purpose (stacked/wound) Typical applications Dimensional drawing Blocking Coupling, decoupling Bypassing RFI for automotive Climatic Max. operating temperature: 125 °C Climatic category (IEC 60068-1:2013): 55/125/56 Construction Dimensions in mm Dielectric: polyethylene terephthalate (polyester, PET) Lead spacing Lead diameter Type Stacked-film technology for lead spacing ±0.4 d ±0.05 5 to 15 mm (= code C, D or E in digit 7 of 1 5.0 0.5 B32529 ordering code) Wound capacitor technology for lead 7.5 0.5 B32520 spacing 10 to 37.5 mm (= code N, Q or R in 10.0 0.61) B32521 digit 7 of ordering code) 15.0 0.8 B32522 Plastic case (UL 94 V-0) 22.5 0.8 B32523 Epoxy resin sealing (UL 94 V-0) 27.5 0.8 B32524 37.5 1.0 B32526 Features High pulse strength 1) 0.5mmforcapacitorwidthw=4mm High contact reliability RoHS-compatible Halogen-free capacitors available on request AEC-Q200D compliant Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated DC voltage, date of manufacture (coded), coded type ("1") for lead spacing 5 mm, series and lot number for lead spacing ≥10 mm Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". PleasereadCautionsandwarningsand Page2of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 5.0 mm 7.5 mm 10.0 mm Type B32529 B32520 B32521 Page 6 9 10 Technology s s s s s s s s s s s s s s s V (V DC) 50 63 100 250 400 630 63 100 250 400 63 100 250 400 630 R V (V AC) 32 40 63 160 200 400 40 63 160 200 40 63 160 200 200 RMS C (μF) R 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Technology: s = Stacked-film technology / w = Wound capacitor technology PleasereadCautionsandwarningsand Page3of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 15.0 mm 22.5 mm 27.5 mm Type B32522 B32523 B32524 Page 12 14 15 Technology s s/w s/w s w s w w w w w w w w w w V (V DC) 63 100 250 400 450 630 63 100 250 400 630 63 100 250 400 630 R V (V AC) 40 63 160 200 200 200 40 63 160 200 200 40 63 160 200 220 RMS C (μF) R 0.047 0.068 0.10 0.15 0.22 0.33 0.39 0.47 0.56 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Technology: s = Stacked-film technology / w = Wound capacitor technology PleasereadCautionsandwarningsand Page4of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Overview of available types Lead spacing 37.5 mm Type B32526 Page 17 Technology w w w w V (V DC) 63 100 250 400 R V (V AC) 40 63 160 200 RMS C (μF) R 3.3 4.7 5.6 6.8 8.2 10 15 22 33 47 56 68 82 100 150 220 Technology: s = Stacked-film technology / w = Wound capacitor technology PleasereadCautionsandwarningsand Page5of44 Importantnotesattheendofthisdocument.

B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 50 32 3.3 7.8 × 13.0 × 7.8 B32529D5335+*** 4000 3200 4000 4.7 7.8 × 13.0 × 7.8 B32529D5475M*** 4000 3200 4000 63 40 0.0010 2.5 × 6.5 × 7.3 B32529C0102+*** 12800 11200 8000 0.0015 2.5 × 6.5 × 7.3 B32529C0152+*** 12800 11200 8000 0.0022 2.5 × 6.5 × 7.3 B32529C0222+*** 12800 11200 8000 0.0033 2.5 × 6.5 × 7.3 B32529C0332+*** 12800 11200 8000 0.0047 2.5 × 6.5 × 7.3 B32529C0472+*** 12800 11200 8000 0.0068 2.5 × 6.5 × 7.3 B32529C0682+*** 12800 11200 8000 0.010 2.5 × 6.5 × 7.3 B32529C0103+*** 12800 11200 8000 0.015 2.5 × 6.5 × 7.3 B32529C0153+*** 12800 11200 8000 0.022 2.5 × 6.5 × 7.3 B32529C0223+*** 12800 11200 8000 0.033 2.5 × 6.5 × 7.3 B32529C0333+*** 12800 11200 8000 0.047 2.5 × 6.5 × 7.3 B32529C0473+*** 12800 11200 8000 0.068 2.5 × 6.5 × 7.3 B32529C0683+*** 12800 11200 8000 0.10 2.5 × 6.5 × 7.3 B32529C0104+*** 12800 11200 8000 0.15 2.5 × 6.5 × 7.3 B32529C0154+*** 12800 11200 8000 0.22 2.5 × 6.5 × 7.3 B32529C0224+*** 12800 11200 8000 0.33 3.0 × 6.5 × 7.3 B32529C0334+*** 10800 9600 8000 0.47 3.5 × 8.0 × 7.3 B32529C0474+*** 9200 8000 8000 0.68 4.5 × 9.5 × 7.3 B32529C0684+*** 7200 6000 6000 1.0 4.5 × 9.5 × 7.3 B32529C0105+*** 7200 6000 6000 1.5 6.0 × 10.5 × 7.5 B32529C0155+*** 5200 4400 4000 2.2 7.8 × 13.0 × 7.8 B32529D0225+*** 4000 3200 4000 100 63 0.0010 2.5 × 6.5 × 7.3 B32529C1102+*** 12800 11200 8000 0.0015 2.5 × 6.5 × 7.3 B32529C1152+*** 12800 11200 8000 0.0022 2.5 × 6.5 × 7.3 B32529C1222+*** 12800 11200 8000 0.0033 2.5 × 6.5 × 7.3 B32529C1332+*** 12800 11200 8000 0.0047 2.5 × 6.5 × 7.3 B32529C1472+*** 12800 11200 8000 0.0068 2.5 × 6.5 × 7.3 B32529C1682+*** 12800 11200 8000 0.010 2.5 × 6.5 × 7.3 B32529C1103+*** 12800 11200 8000 0.015 2.5 × 6.5 × 7.3 B32529C1153+*** 12800 11200 8000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page6of44 Importantnotesattheendofthisdocument.

B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 100 63 0.022 2.5 × 6.5 × 7.3 B32529C1223+*** 12800 11200 8000 0.033 2.5 × 6.5 × 7.3 B32529C1333+*** 12800 11200 8000 0.047 2.5 × 6.5 × 7.3 B32529C1473+*** 12800 11200 8000 0.068 2.5 × 6.5 × 7.3 B32529C1683+*** 12800 11200 8000 0.10 2.5 × 6.5 × 7.3 B32529C1104+*** 12800 11200 8000 0.15 3.0 × 6.5 × 7.3 B32529C1154+*** 10800 9600 8000 0.22 3.5 × 8.0 × 7.3 B32529C1224+*** 9200 8000 8000 0.33 3.5 × 8.0 × 7.3 B32529C1334+*** 9200 8000 8000 0.47 4.5 × 9.5 × 7.3 B32529C1474+*** 7200 6000 6000 0.68 6.0 × 10.5 × 7.5 B32529C1684+*** 5200 4400 4000 1.0 7.8 × 13.0 × 7.8 B32529D1105+*** 4000 3200 4000 250 160 0.0010 2.5 × 6.5 × 7.3 B32529C3102+*** 12800 11200 8000 0.0015 2.5 × 6.5 × 7.3 B32529C3152+*** 12800 11200 8000 0.0022 2.5 × 6.5 × 7.3 B32529C3222+*** 12800 11200 8000 0.0033 2.5 × 6.5 × 7.3 B32529C3332+*** 12800 11200 8000 0.0047 2.5 × 6.5 × 7.3 B32529C3472+*** 12800 11200 8000 0.0068 2.5 × 6.5 × 7.3 B32529C3682+*** 12800 11200 8000 0.010 2.5 × 6.5 × 7.3 B32529C3103+*** 12800 11200 8000 0.015 2.5 × 6.5 × 7.3 B32529C3153+*** 12800 11200 8000 0.022 2.5 × 6.5 × 7.3 B32529C3223+*** 12800 11200 8000 0.033 3.0 × 6.5 × 7.3 B32529C3333+*** 10800 9600 8000 0.047 3.5 × 8.0 × 7.3 B32529C3473+*** 9200 8000 8000 0.068 4.5 × 9.5 × 7.3 B32529C3683+*** 7200 6000 6000 0.10 4.5 × 9.5 × 7.3 B32529C3104+*** 7200 6000 6000 0.15 5.0 × 10.0 × 7.5 B32529C3154+*** 6400 5600 6000 0.22 7.8 × 13.0 × 7.8 B32529D3224+*** 4000 3200 4000 0.33 7.8 × 13.0 × 7.8 B32529C3334+*** 4000 3200 4000 0.47 7.8 × 13.0 × 7.8 B32529C3474+*** 4000 3200 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page7of44 Importantnotesattheendofthisdocument.

B32529 General purpose (stacked) Ordering codes and packing units (lead spacing 5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 400 200 0.0010 2.5 × 6.5 × 7.3 B32529C6102+*** 12800 11200 8000 0.0015 2.5 × 6.5 × 7.3 B32529C6152+*** 12800 11200 8000 0.0022 2.5 × 6.5 × 7.3 B32529C6222+*** 12800 11200 8000 0.0033 2.5 × 6.5 × 7.3 B32529C6332+*** 12800 11200 8000 0.0047 2.5 × 6.5 × 7.3 B32529C6472+*** 12800 11200 8000 0.0068 2.5 × 6.5 × 7.3 B32529C6682+*** 12800 11200 8000 0.010 3.0 × 6.5 × 7.3 B32529E6103+*** 10800 9600 8000 0.015 3.0 × 6.5 × 7.3 B32529E6153+*** 10800 9600 8000 0.022 3.5 × 8.0 × 7.3 B32529E6223+*** 9200 8000 8000 0.033 4.5 × 9.5 × 7.3 B32529E6333+*** 7200 6000 6000 0.047 4.5 × 9.5 × 7.3 B32529E6473+*** 7200 6000 6000 0.068 6.0 × 10.5 × 7.5 B32529E6683+*** 5200 4400 4000 0.10 7.8 × 13.0 × 7.8 B32529E6104+*** 4000 3200 4000 0.15 7.8 × 13.0 × 7.8 B32529E6154+*** 4000 3200 4000 630 400 0.0010 2.5 × 6.5 × 7.3 B32529C8102+*** 12800 11200 8000 0.0015 2.5 × 6.5 × 7.3 B32529C8152+*** 12800 11200 8000 0.0022 2.5 × 6.5 × 7.3 B32529C8222+*** 12800 11200 8000 0.0033 3.5 × 8.0 × 7.3 B32529C8332+*** 9200 8000 8000 0.0047 3.5 × 8.0 × 7.3 B32529C8472+*** 9200 8000 8000 0.0068 3.5 × 8.0 × 7.3 B32529C8682+*** 9200 8000 8000 0.010 5.0 × 10.0 × 7.5 B32529C8103+*** 6400 5600 6000 0.015 5.0 × 10.0 × 7.5 B32529C8153+*** 6400 5600 6000 0.022 7.8 × 13.0 × 7.8 B32529C8223+*** 5200 4400 4000 0.033 7.8 × 13.0 × 7.8 B32529C8333+*** 4000 3200 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page8of44 Importantnotesattheendofthisdocument.

B32520 General purpose (stacked) Ordering codes and packing units (lead spacing 7.5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 63 40 0.47 3.0 × 8.0 × 10.0 B32520C0474+*** 10400 9600 8000 0.68 4.0 × 8.5 × 10.0 B32520C0684+*** 8000 7200 6000 1.0 5.0 × 10.5 × 10.0 B32520C0105+*** 6400 5600 4000 1.5 5.0 × 10.5 × 10.0 B32520C0155+*** 6400 5600 4000 2.2 6.0 × 12.0 × 10.3 B32520C0225+*** 5200 4400 3000 100 63 0.15 3.0 × 8.0 × 10.0 B32520C1154+*** 10400 9600 8000 0.22 3.0 × 8.0 × 10.0 B32520C1224+*** 10400 9600 8000 0.33 4.0 × 8.5 × 10.0 B32520C1334+*** 8000 7200 6000 0.47 5.0 × 10.5 × 10.0 B32520C1474+*** 6400 5600 4000 0.68 6.0 × 12.0 × 10.3 B32520C1684+*** 5200 4400 3000 1.0 6.0 × 12.0 × 10.3 B32520C1105+*** 5200 4400 3000 250 160 0.068 3.0 × 8.0 × 10.0 B32520C3683+*** 10400 9600 8000 0.10 4.0 × 8.5 × 10.0 B32520C3104+*** 8000 7200 6000 0.15 5.0 × 10.5 × 10.0 B32520C3154+*** 6400 5600 4000 0.22 6.0 × 12.0 × 10.3 B32520C3224+*** 5200 4400 3000 400 200 0.015 3.0 × 8.0 × 10.0 B32520E6153+*** 10400 9600 8000 0.022 3.0 × 8.0 × 10.0 B32520E6223+*** 10400 9600 8000 0.033 4.0 × 8.5 × 10.0 B32520E6333+*** 8000 7200 6000 0.047 4.0 × 8.5 × 10.0 B32520E6473+*** 8000 7200 6000 0.068 5.0 × 10.5 × 10.0 B32520E6683+*** 6400 5600 4000 0.10 5.0 × 10.5 × 10.0 B32520E6104+*** 6400 5600 4000 0.15 6.0 × 12.0 × 10.3 B32520E6154+*** 5200 4400 3000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page9of44 Importantnotesattheendofthisdocument.

B32521 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 10 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 63 40 0.47 4.0 × 7.0 × 13.0 B32521C0474+*** 4000 6800 4000 0.68 4.0 × 7.0 × 13.0 B32521C0684+*** 4000 6800 4000 1.0 4.0 × 9.0 × 13.0 B32521C0105+*** 4000 6800 4000 1.5 5.0 × 11.0 × 13.0 B32521C0155+*** 3320 5200 4000 2.2 5.0 × 11.0 × 13.0 B32521C0225+*** 3320 5200 4000 3.3 6.0 × 12.0 × 13.0 B32521C0335+*** 2720 4400 4000 100 63 0.047 4.0 × 7.0 × 13.0 B32521C1473+*** 4000 6800 4000 0.068 4.0 × 7.0 × 13.0 B32521C1683+*** 4000 6800 4000 0.10 4.0 × 7.0 × 13.0 B32521C1104+*** 4000 6800 4000 0.15 4.0 × 7.0 × 13.0 B32521C1154+*** 4000 6800 4000 0.22 4.0 × 7.0 × 13.0 B32521C1224+*** 4000 6800 4000 0.33 4.0 × 7.0 × 13.0 B32521C1334+*** 4000 6800 4000 0.47 4.0 × 9.0 × 13.0 B32521C1474+*** 4000 6800 4000 0.68 5.0 × 11.0 × 13.0 B32521C1684+*** 3320 5200 4000 1.0 6.0 × 12.0 × 13.0 B32521C1105+*** 2720 4400 4000 250 160 0.010 4.0 × 7.0 × 13.0 B32521C3103+*** 4000 6800 4000 0.015 4.0 × 7.0 × 13.0 B32521C3153+*** 4000 6800 4000 0.022 4.0 × 7.0 × 13.0 B32521C3223+*** 4000 6800 4000 0.033 4.0 × 7.0 × 13.0 B32521C3333+*** 4000 6800 4000 0.047 4.0 × 7.0 × 13.0 B32521C3473+*** 4000 6800 4000 0.056 4.0 × 7.0 × 13.0 B32521C3563+*** 4000 6800 4000 0.068 4.0 × 7.0 × 13.0 B32521C3683+*** 4000 6800 4000 0.082 4.0 × 7.0 × 13.0 B32521C3823+*** 4000 6800 4000 0.10 4.0 × 7.0 × 13.0 B32521C3104+*** 4000 6800 4000 0.12 4.0 × 9.0 × 13.0 B32521C3124+*** 4000 6800 4000 0.15 4.0 × 9.0 × 13.0 B32521C3154+*** 4000 6800 4000 0.18 5.0 × 11.0 × 13.0 B32521C3184+*** 3320 5200 4000 0.22 5.0 × 11.0 × 13.0 B32521C3224+*** 3320 5200 4000 0.33 5.0 × 11.0 × 13.0 B32521C3334+*** 3320 5200 4000 0.47 6.0 × 12.0 × 13.0 B32521C3474+*** 2720 4400 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page10of44 Importantnotesattheendofthisdocument.

B32521 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 10 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 400 200 0.010 4.0 × 7.0 × 13.0 B32521E6103+*** 4000 6800 4000 0.015 4.0 × 7.0 × 13.0 B32521E6153+*** 4000 6800 4000 0.022 4.0 × 7.0 × 13.0 B32521E6223+*** 4000 6800 4000 0.033 4.0 × 7.0 × 13.0 B32521E6333+*** 4000 6800 4000 0.047 4.0 × 9.0 × 13.0 B32521E6473+*** 4000 6800 4000 0.068 4.0 × 9.0 × 13.0 B32521E6683+*** 4000 6800 4000 0.10 5.0 × 11.0 × 13.0 B32521E6104+*** 3320 5200 4000 0.15 6.0 × 12.0 × 13.0 B32521E6154+*** 2720 4400 4000 630 200 0.010 4.0 × 9.0 × 13.0 B32521D8103+*** (cid:4) 6800 4000 0.015 5.0 × 11.0 × 13.0 B32521D8153+*** (cid:4) 6800 4000 0.022 5.0 × 11.0 × 13.0 B32521D8223+*** (cid:4) 5200 4000 0.033 6.0 × 12.0 × 13.0 B32521D8333+*** (cid:4) 5200 4000 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page11of44 Importantnotesattheendofthisdocument.

B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack pcs./ pcs./ V DC V AC μF mm below) pcs./MOQ MOQ MOQ 63 40 0.68 5.0 × 10.5 × 18.0 B32522C0684+*** 4680 5200 4000 1.0 5.0 × 10.5 × 18.0 B32522C0105+*** 4680 5200 4000 1.5 5.0 × 10.5 × 18.0 B32522C0155+*** 4680 5200 4000 2.2 5.0 × 10.5 × 18.0 B32522C0225+*** 4680 5200 4000 3.3 6.0 × 11.0 × 18.0 B32522C0335+*** 3840 4400 4000 4.7 7.0 × 12.5 × 18.0 B32522C0475+*** 3320 3600 4000 6.8 8.5 × 14.5 × 18.0 B32522C0685+*** 2720 2800 2000 10 9.0 × 17.5 × 18.0 B32522C0106+*** 2560 2800 2000 100 63 0.33 5.0 × 10.5 × 18.0 B32522C1334+*** 4680 5200 4000 0.47 5.0 × 10.5 × 18.0 B32522C1474+*** 4680 5200 4000 0.68 5.0 × 10.5 × 18.0 B32522C1684+*** 4680 5200 4000 1.0 5.0 × 10.5 × 18.0 B32522C1105+*** 4680 5200 4000 1.0 ∇ 6.0 × 11.0 × 18.0 B32522Q1105+*** 3840 4400 4000 1.5 6.0 × 11.0 × 18.0 B32522C1155+*** 3840 4400 4000 1.5 ∇ 7.0 × 12.5 × 18.0 B32522Q1155+*** 3320 3600 4000 2.2 7.0 × 12.5 × 18.0 B32522C1225+*** 3320 3600 4000 2.2 ∇ 8.5 × 14.5 × 18.0 B32522Q1225+*** 2720 2800 2000 3.3 8.5 × 14.5 × 18.0 B32522C1335+*** 2720 2800 2000 3.3 ∇ 9.0 × 17.5 × 18.0 B32522Q1335+*** 2560 2800 2000 4.7 9.0 × 17.5 × 18.0 B32522C1475+*** 2560 2800 2000 4.7 ∇ 11.0 × 18.5 × 18.0 B32522Q1475+*** (cid:4) 2200 1200 6.8 11.0 × 18.5 × 18.0 B32522C1685+*** (cid:4) (cid:4) 1200 250 160 0.10 5.0 × 10.5 × 18.0 B32522C3104+*** 4680 5200 4000 0.15 5.0 × 10.5 × 18.0 B32522C3154+*** 4680 5200 4000 0.22 5.0 × 10.5 × 18.0 B32522C3224+*** 4680 5200 4000 0.33 5.0 × 10.5 × 18.0 B32522C3334+*** 4680 5200 4000 0.39 5.0 × 10.5 × 18.0 B32522C3394+*** 4680 5200 4000 0.47 6.0 × 11.0 × 18.0 B32522C3474+*** 3840 4400 4000 0.56 7.0 × 12.5 × 18.0 B32522C3564+*** 3320 3600 4000 ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page12of44 Importantnotesattheendofthisdocument.

B32522 General purpose (stacked/wound) Ordering codes and packing units (lead spacing 15 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack pcs./ pcs./ V DC V AC μF mm below) pcs./MOQ MOQ MOQ 250 160 0.68 7.0 × 12.5 × 18.0 B32522C3684+*** 3320 3600 4000 1.0 8.5 × 14.5 × 18.0 B32522C3105+*** 2720 2800 2000 1.0 ∇ 8.5 × 14.5 × 18.0 B32522N3105+*** 2720 2800 2000 1.5 9.0 × 17.5 × 18.0 B32522C3155+*** 2560 2800 2000 1.5 ∇ 9.0 × 17.5 × 18.0 B32522N3155+*** 2560 2800 2000 2.2 11.0 × 18.5 × 18.0 B32522C3225+*** (cid:4) (cid:4) 1200 400 200 0.047 5.0 × 10.5 × 18.0 B32522E6473+*** 4680 5200 4000 0.068 5.0 × 10.5 × 18.0 B32522E6683+*** 4680 5200 4000 0.10 5.0 × 10.5 × 18.0 B32522E6104+*** 4680 5200 4000 0.15 5.0 × 10.5 × 18.0 B32522E6154+*** 4680 5200 4000 0.22 6.0 × 11.0 × 18.0 B32522E6224+*** 3840 4400 4000 0.33 7.0 × 12.5 × 18.0 B32522E6334+*** 3320 3600 4000 0.39 9.0 × 17.5 × 18.0 B32522E6394+*** 2560 2800 2000 0.47 9.0 × 17.5 × 18.0 B32522E6474+*** 2560 2800 2000 0.56 9.0 × 17.5 × 18.0 B32522E6564+*** 2560 2800 2000 0.68 9.0 × 17.5 × 18.0 B32522E6684+*** 2560 2800 2000 1.0 11.0 × 18.5 × 18.0 B32522E6105+*** (cid:4) (cid:4) 1200 450 200 0.10 ∇ 5.0 × 10.5 × 18.0 B32522N6104+*** 4680 5200 4000 0.15 ∇ 5.0 × 10.5 × 18.0 B32522N6154+*** 4680 5200 4000 0.22 ∇ 6.0 × 11.0 × 18.0 B32522N6224+*** 3840 4400 4000 0.33 ∇ 7.0 × 12.5 × 18.0 B32522N6334+*** 3320 3600 4000 0.47 ∇ 8.5 × 14.5 × 18.0 B32522N6474+*** 2720 2800 2000 0.68 ∇ 9.0 × 17.5 × 18.0 B32522N6684+*** 2560 2800 2000 1.0 ∇ 11.0 × 18.5 × 18.0 B32522N6105+*** (cid:4) 2200 1200 630 200 0.047 5.0 × 10.5 × 18.0 B32522D8473+*** (cid:4) 5200 4000 0.068 6.0 × 11.0 × 18.0 B32522D8683+*** (cid:4) 4400 4000 0.10 7.0 × 12.5 × 18.0 B32522D8104+*** (cid:4) 3600 4000 0.15 8.5 × 14.5 × 18.0 B32522D8154+*** (cid:4) 2800 2000 0.22 9.0 × 17.5 × 18.0 B32522D8224+*** (cid:4) 2800 2000 ∇ Wound capacitor technology MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page13of44 Importantnotesattheendofthisdocument.

B32523 General purpose (wound) Ordering codes and packing units (lead spacing 22.5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 63 40 3.3 6.0 × 15.0 × 26.5 B32523R0335+*** 2720 2800 2880 4.7 6.0 × 15.0 × 26.5 B32523R0475+*** 2720 2800 2880 6.8 6.0 × 15.0 × 26.5 B32523R0685+*** 2720 2800 2880 10 7.0 × 16.0 × 26.5 B32523R0106+*** 2320 2400 2520 15 10.5 × 16.5 × 26.5 B32523R0156+*** 1560 1600 2160 22 12.0 × 22.0 × 26.5 B32523R0226+*** (cid:4) (cid:4) 1800 100 63 1.5 6.0 × 15.0 × 26.5 B32523Q1155+*** 2720 2800 2880 2.2 6.0 × 15.0 × 26.5 B32523Q1225+*** 2720 2800 2880 3.3 6.0 × 15.0 × 26.5 B32523Q1335+*** 2720 2800 2880 4.7 7.0 × 16.0 × 26.5 B32523Q1475+*** 2320 2400 2520 6.8 8.5 × 16.5 × 26.5 B32523Q1685+*** 1960 2000 2040 10 10.5 × 18.5 × 26.5 B32523Q1106+*** 1560 1600 2160 15 12.0 × 22.0 × 26.5 B32523Q1156+*** (cid:4) (cid:4) 1800 250 160 0.47 6.0 × 15.0 × 26.5 B32523Q3474+*** 2720 2800 2880 0.68 6.0 × 15.0 × 26.5 B32523Q3684+*** 2720 2800 2880 1.0 6.0 × 15.0 × 26.5 B32523Q3105+*** 2720 2800 2880 1.5 7.0 × 16.0 × 26.5 B32523Q3155+*** 2320 2400 2520 2.2 10.5 × 16.5 × 26.5 B32523Q3225+*** 1560 1600 2160 3.3 11.0 × 20.5 × 26.5 B32523Q3335+*** 1480 1400 2040 400 200 0.22 6.0 × 15.0 × 26.5 B32523Q6224+*** 2720 2800 2880 0.33 6.0 × 15.0 × 26.5 B32523Q6334+*** 2720 2800 2880 0.47 7.0 × 16.0 × 26.5 B32523Q6474+*** 2320 2400 2520 0.68 8.5 × 16.5 × 26.5 B32523Q6684+*** 1920 2000 2040 1.0 10.5 × 16.5 × 26.5 B32523Q6105+*** 1560 1600 2160 1.5 11.0 × 20.5 × 26.5 B32523Q6155+*** 1480 1400 2040 630 200 0.10 6.0 × 15.0 × 26.5 B32523Q8104+*** 2720 2800 2880 0.15 6.0 × 15.0 × 26.5 B32523Q8154+*** 2720 2800 2880 0.22 7.0 × 16.0 × 26.5 B32523Q8224+*** 2320 2400 2520 0.33 10.5 × 16.5 × 26.5 B32523Q8334+*** 1560 1600 2160 0.47 10.5 × 20.5 × 26.5 B32523Q8474+*** 1560 1600 2160 0.68 12.0 × 22.0 × 26.5 B32523Q8684+*** (cid:4) (cid:4) 1800 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page14of44 Importantnotesattheendofthisdocument.

B32524 General purpose (wound) Ordering codes and packing units (lead spacing 27.5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 63 40 4.7 11.0 × 21.0 × 31.5 B32524R0475+*** (cid:4) 1400 1280 6.8 11.0 × 21.0 × 31.5 B32524Q0685+*** (cid:4) 1400 1280 10 11.0 × 21.0 × 31.5 B32524R0106+*** (cid:4) 1400 1280 15 11.0 × 21.0 × 31.5 B32524R0156+*** (cid:4) 1400 1280 22 11.0 × 21.0 × 31.5 B32524R0226+*** (cid:4) 1400 1280 33 12.5 × 21.5 × 31.5 B32524R0336+*** (cid:4) 1200 1120 47 18.0 × 27.5 × 31.5 B32524R0476+*** (cid:4) (cid:4) 800 68 18.0 × 27.5 × 31.5 B32524R0686+*** (cid:4) (cid:4) 800 100 22.0 × 36.5 × 31.5 B32524R0107+*** (cid:4) (cid:4) 640 100 63 4.7 11.0 × 21.0 × 31.5 B32524Q1475+*** (cid:4) 1400 1280 6.8 11.0 × 21.0 × 31.5 B32524Q1685+*** (cid:4) 1400 1280 10 11.0 × 21.0 × 31.5 B32524Q1106+*** (cid:4) 1400 1280 15 11.0 × 21.0 × 31.5 B32524Q1156+*** (cid:4) 1400 1280 22 14.0 × 24.5 × 31.5 B32524Q1226+*** (cid:4) 1000 1040 33 18.0 × 27.5 × 31.5 B32524Q1336+*** (cid:4) (cid:4) 800 47 21.0 × 31.0 × 31.5 B32524Q1476+*** (cid:4) (cid:4) 720 68 22.0 × 36.5 × 31.5 B32524Q1686+*** (cid:4) (cid:4) 640 250 160 1.5 11.0 × 21.0 × 31.5 B32524Q3155+*** (cid:4) 1400 1280 2.2 11.0 × 21.0 × 31.5 B32524Q3225+*** (cid:4) 1400 1280 3.3 11.0 × 21.0 × 31.5 B32524Q3335+*** (cid:4) 1400 1280 4.7 11.0 × 21.0 × 31.5 B32524Q3475+*** (cid:4) 1400 1280 6.8 11.0 × 21.0 × 31.5 B32524R3685+*** (cid:4) 1400 1280 10 12.5 × 21.5 × 31.5 B32524R3106+*** (cid:4) 1200 1120 15 15.0 × 24.5 × 31.5 B32524R3156M*** (cid:4) (cid:4) 960 15 18.0 × 27.5 × 31.5 B32524R3156J*** (cid:4) (cid:4) 960 15 18.0 × 27.5 × 31.5 B32524R3156K*** (cid:4) (cid:4) 960 22 19.0 × 30.0 × 31.5 B32524R3226+*** (cid:4) (cid:4) 720 33 22.0 × 36.5 × 31.5 B32524R3336+*** (cid:4) (cid:4) 640 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page15of44 Importantnotesattheendofthisdocument.

B32524 General purpose (wound) Ordering codes and packing units (lead spacing 27.5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 400 200 0.68 11.0 × 19.0 × 31.5 B32524Q6684+*** (cid:4) 1400 1280 1.0 11.0 × 19.0 × 31.5 B32524Q6105+*** (cid:4) 1400 1280 1.5 11.0 × 19.0 × 31.5 B32524Q6155+*** (cid:4) 1400 1280 2.2 11.0 × 21.0 × 31.5 B32524R6225+*** (cid:4) 1400 1280 3.3 14.0 × 24.5 × 31.5 B32524R6335+*** (cid:4) 1000 1040 4.7 14.0 × 24.5 × 31.5 B32524R6475+*** (cid:4) 1000 1040 6.8 18.0 × 27.5 × 31.5 B32524R6685+*** (cid:4) (cid:4) 800 10 22.0 × 36.5 × 31.5 B32524R6106+*** (cid:4) (cid:4) 640 630 220 0.33 11.0 × 21.0 × 31.5 B32524Q8334+*** (cid:4) 1400 1280 0.47 11.0 × 21.0 × 31.5 B32524Q8474+*** (cid:4) 1400 1280 0.68 11.0 × 21.0 × 31.5 B32524Q8684+*** (cid:4) 1400 1280 1.0 14.0 × 24.5 × 31.5 B32524Q8105+*** (cid:4) 1000 1040 1.5 18.0 × 27.5 × 31.5 B32524Q8155+*** (cid:4) (cid:4) 800 2.2 21.0 × 31.0 × 31.5 B32524Q8225+*** (cid:4) (cid:4) 720 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 289= Ammopack K= ±10% 189= Reel J= ±5% 000= Untaped(standardleadlength6(cid:4)1mm) PleasereadCautionsandwarningsand Page16of44 Importantnotesattheendofthisdocument.

B32526 General purpose (wound) Ordering codes and packing units (lead spacing 37.5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 63 40 22 12.0 × 22.0 × 41.5 B32526R0226+*** (cid:4) (cid:4) 1620 33 12.0 × 22.0 × 41.5 B32526R0336+*** (cid:4) (cid:4) 1620 47 12.0 × 22.0 × 41.5 B32526R0476+*** (cid:4) (cid:4) 1620 56 24.0 × 15.0 × 41.5 B32526T0566+*** (cid:4) (cid:4) 1040 68 16.0 × 28.5 × 41.5 B32526R0686+*** (cid:4) (cid:4) 800 82 24.0 × 19.0 × 41.5 B32526T0826+*** (cid:4) (cid:4) 780 100 18.0 × 32.5 × 41.5 B32526R0107+*** (cid:4) (cid:4) 720 150 20.0 × 39.5 × 41.5 B32526R0157+*** (cid:4) (cid:4) 640 220 28.0 × 42.5 × 41.5 B32526R0227A*** (cid:4) (cid:4) 440 100 63 15 12.0 × 22.0 × 41.5 B32526R1156+*** (cid:4) (cid:4) 1620 22 12.0 × 22.0 × 41.5 B32526R1226+*** (cid:4) (cid:4) 1620 33 14.0 × 25.0 × 41.5 B32526R1336+*** (cid:4) (cid:4) 1380 33 24.0 × 15.0 × 41.5 B32526T1336+*** (cid:4) (cid:4) 1040 47 16.0 × 28.5 × 41.5 B32526R1476+*** (cid:4) (cid:4) 800 47 24.0 × 19.0 × 41.5 B32526T1476+*** (cid:4) (cid:4) 780 68 18.0 × 32.5 × 41.5 B32526R1686+*** (cid:4) (cid:4) 720 100 20.0 × 39.5 × 41.5 B32526R1107+*** (cid:4) (cid:4) 640 150 28.0 × 42.5 × 41.5 B32526R1157+*** (cid:4) (cid:4) 440 250 160 4.7 12.0 × 22.0 × 41.5 B32526R3475+*** (cid:4) (cid:4) 1620 6.8 12.0 × 22.0 × 41.5 B32526R3685+*** (cid:4) (cid:4) 1620 10 12.0 × 22.0 × 41.5 B32526R3106+*** (cid:4) (cid:4) 1620 15 14.0 × 25.0 × 41.5 B32526R3156+*** (cid:4) (cid:4) 1380 15 24.0 × 15.0 × 41.5 B32526T3156+*** (cid:4) (cid:4) 1040 22 16.0 × 28.5 × 41.5 B32526R3226+*** (cid:4) (cid:4) 800 22 24.0 × 19.0 × 41.5 B32526T3226+*** (cid:4) (cid:4) 780 33 20.0 × 39.5 × 41.5 B32526R3336+*** (cid:4) (cid:4) 640 47 20.0 × 39.5 × 41.5 B32526R3476+*** (cid:4) (cid:4) 640 68 28.0 × 42.5 × 41.5 B32526R3686+*** (cid:4) (cid:4) 440 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 000= Untaped(standardleadlength6(cid:4)1mm) K= ±10% J= ±5% A= (cid:4)15...+5%(220μFtypeonly) PleasereadCautionsandwarningsand Page17of44 Importantnotesattheendofthisdocument.

B32526 General purpose (wound) Ordering codes and packing units (lead spacing 37.5 mm) V V C Max. dimensions Ordering code Ammo Reel Untaped R RMS R f ≤60 Hz w × h × l (composition see pack V DC V AC μF mm below) pcs./MOQ pcs./MOQ pcs./MOQ 400 200 3.3 12.0 × 22.0 × 41.5 B32526R6335+*** (cid:4) (cid:4) 1620 4.7 12.0 × 22.0 × 41.5 B32526R6475+*** (cid:4) (cid:4) 1620 5.6 24.0 × 15.0 × 41.5 B32526T6565+*** (cid:4) (cid:4) 1040 6.8 14.0 × 25.0 × 41.5 B32526R6685+*** (cid:4) (cid:4) 1380 8.2 24.0 × 19.0 × 41.5 B32526T6825+*** (cid:4) (cid:4) 780 10 18.0 × 32.5 × 41.5 B32526R6106+*** (cid:4) (cid:4) 720 15 20.0 × 39.5 × 41.5 B32526R6156+*** (cid:4) (cid:4) 640 22 28.0 × 42.5 × 41.5 B32526R6226+*** (cid:4) (cid:4) 440 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Compositionoforderingcode += Capacitancetolerancecode: ***= Packagingcode: M=±20% 000= Untaped(standardleadlength6(cid:4)1mm) K= ±10% J= ±5% A= (cid:4)15...+5%(220μFtypeonly) PleasereadCautionsandwarningsand Page18of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Technical data Reference standard: IEC 61071:2007. AEC-Q200D compliance on request. All data given at T = 20 °C, unless otherwise specified. Rated temperature T +85 °C R Operating temperature range Max. operating temperature T +125 °C op,max Upper category temperature T +125 °C max Lower category temperature Tmin (cid:4)55 °C Rated temperature T +85 °C R Dissipation factor tan δ (in 10-3) at C ≤ 0.1 μF 0.1 μF < C ≤ 1 μF C > 1 μF R R R at 20 °C (upper limit values) 1 kHz 8 8 10 10 kHz 15 15 (cid:4) 100 kHz 30 (cid:4) (cid:4) Insulation resistance R V C ≤ 0.33 μF C > 0.33 μF ins R R R or time constant τ = CR (cid:5) Rins ≤ 100 V DC 3750 MΩ 1250 s at 20 °C, rel. humidity ≤ 65% ≥ 250 V DC 7500 MΩ 2500 s (minimum as-delivered values) DC test voltage 1.4 (cid:5) VR, 2 s Category voltage V T (°C) DC voltage derating AC voltage derating C op (continuous operation with T ≤ 85 V = V V = V op C R C,RMS RMS VDC or VAC at f ≤ 60 Hz) 85<Top≤125 VC = VR (cid:5) (165(cid:4)Top)/80 VC,RMS=VRMS(cid:5) (165(cid:4)Top)/80 Operating voltage V for T (°C) DC voltage (max. hours) AC voltage (max. hours) op op short operating periods Top ≤ 100 Vop = 1.25 (cid:5) VC (2000 h) Vop = 1.0 (cid:5) VC,RMS (2000 h) (VDC or VAC at f ≤ 60 Hz) 100<Top≤125Vop = 1.25 (cid:5) VC (1000 h) Vop = 1.0 (cid:5) VC,RMS (1000 h) Biased humidity 1000 h / 40 °C / 93% relative humidity with V R,DC Limit value after biased Capacitance change (cid:6)ΔC/C(cid:6) ≤ 5% humidity test Dissipation factor change Δ tan δ ≤ 5 (cid:5) 10-3 (at 1 kHz) Insulation resistance R ≥ 50% of minimum ins or time constant τ = CR (cid:5) Rins as-delivered values Reliability: Failure rate λ 1 fit (≤ 1 (cid:5) 10-9/h) at 0.5 (cid:5) VR, 40 °C Service life tSL 200 000 h at 1.0 (cid:5) VR, 85 °C For conversion to other operating conditions and temperatures, Failure criteria: refer to chapter "Quality, 2 Reliability". Total failure Short circuit or open circuit Failure due to variation Capacitance change (cid:6)ΔC/C(cid:6) > 10% of parameters Dissipation factor tan δ > 2 (cid:5) upper limit value Insulation resistance R < 150 MΩ (C ≤ 0.33 μF) ins R or time constant τ = CR (cid:5) Rins < 50 s (CR> 0.33 μF) PleasereadCautionsandwarningsand Page19of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/μs. "k " represents the maximum permissible pulse characteristic of the waveform applied to the 0 capacitor, expressed in V2/μs. Note: The values of dV/dt and k provided below must not be exceeded in order to avoid damaging the 0 capacitor. dV/dt values Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm Technology S S S W S W W W W V V R RMS V DC V AC dV/dt in V/μs 50 32 200 (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) 63 40 250 120 50 (cid:4) 30 (cid:4) 3 1 0.8 100 63 300 150 75 (cid:4) 50 5 4 3 1 250 160 400 200 150 (cid:4) 100 10 8 5 4 400 200 600 275 175 (cid:4) 125 (cid:4) 10 8.5 6 450 200 (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) 20 (cid:4) (cid:4) (cid:4) 630 400 800 (cid:4) 320 (cid:4) 150 (cid:4) 15 12 (cid:4) S = Stacked, W = Wound k values 0 Lead spacing 5 mm 7.5 mm 10 mm 15 mm 22.5 mm 27.5 mm 37.5 mm Technology S S S W S W W W W V V R RMS V DC V AC k in V2/μs 0 50 32 20000 (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) 63 40 30000 15000 6300 (cid:4) 3800 (cid:4) 375 130 100 100 63 60000 30000 15000 (cid:4) 10000 850 800 600 200 250 160 200000 100000 75000 (cid:4) 50000 5000 4000 2500 2000 400 200 500000 220000 140000 (cid:4) 100000 (cid:4) 10000 8500 6000 450 200 (cid:4) (cid:4) (cid:4) (cid:4) (cid:4) 15000 (cid:4) (cid:4) (cid:4) 630 400 1000000 (cid:4) 400000 (cid:4) 190000 (cid:4) 18000 15000 (cid:4) S = Stacked, W = Wound PleasereadCautionsandwarningsand Page20of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Impedance Z versus frequency f (typical values) PleasereadCautionsandwarningsand Page21of44 Importantnotesattheendofthisdocument.

B32529 General purpose (stacked) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 5 mm 50 V DC/32 V AC 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC PleasereadCautionsandwarningsand Page22of44 Importantnotesattheendofthisdocument.

B32529 General purpose (stacked) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 5 mm 400 V DC/200 V AC 630 V DC/400 V AC PleasereadCautionsandwarningsand Page23of44 Importantnotesattheendofthisdocument.

B32520 General purpose (stacked) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 7.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC PleasereadCautionsandwarningsand Page24of44 Importantnotesattheendofthisdocument.

B32521 General purpose (stacked/wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 10 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC PleasereadCautionsandwarningsand Page25of44 Importantnotesattheendofthisdocument.

B32521 General purpose (stacked/wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 10 mm 630 V DC/200 V AC PleasereadCautionsandwarningsand Page26of44 Importantnotesattheendofthisdocument.

B32522 General purpose (stacked/wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 15 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC PleasereadCautionsandwarningsand Page27of44 Importantnotesattheendofthisdocument.

B32522 General purpose (stacked/wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 15 mm 450 V DC/200 V AC 630 V DC/200 V AC PleasereadCautionsandwarningsand Page28of44 Importantnotesattheendofthisdocument.

B32523 General purpose (wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 22.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC PleasereadCautionsandwarningsand Page29of44 Importantnotesattheendofthisdocument.

B32523 General purpose (wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 22.5 mm 630 V DC/200 V AC PleasereadCautionsandwarningsand Page30of44 Importantnotesattheendofthisdocument.

B32524 General purpose (wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 27.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC PleasereadCautionsandwarningsand Page31of44 Importantnotesattheendofthisdocument.

B32524 General purpose (wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 27.5 mm 630 V DC/220 V AC PleasereadCautionsandwarningsand Page32of44 Importantnotesattheendofthisdocument.

B32526 General purpose (wound) Permissible AC voltage V versus frequency f (for sinusoidal waveforms, T ≤55 °C) RMS A For T >55 °C, please refer to "General technical information", section 3.2.3. A Lead spacing 37.5 mm 63 V DC/40 V AC 100 V DC/63 V AC 250 V DC/160 V AC 400 V DC/200 V AC PleasereadCautionsandwarningsand Page33of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/(cid:4)0.5 mm from capacitor body or seating plane Evaluation criteria: Wetting of wire surface by new solder ≥90%, Visual inspection free-flowing solder 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C 10 ±1 s coated uncoated (lead spacing >10 mm) MFP MKP (lead spacing >7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) 5 ±1 s MKP (lead spacing ≤7.5 mm) <4 s MKT uncoated (lead spacing ≤10 mm) recommended soldering insulated (B32559) profile for MKT uncoated (lead spacing ≤ 10 mm) and insulated (B32559) PleasereadCautionsandwarningsand Page34of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Immersion depth 2.0 +0/(cid:4)0.5 mm from capacitor body or seating plane Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor body and liquid solder Evaluation criteria: Visual inspection No visible damage 2% for MKT/MKP/MFP ΔC/C 0 5% for EMI suppression capacitors tan δ As specified in sectional specification 1.3 General notes on soldering Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate- gory temperature T . Long exposure to temperatures above this type-related temperature limit max can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. For short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: Pre-heating temperature and time Forced cooling immediately after soldering Terminal characteristics: diameter, length, thermal resistance, special configurations (e.g. crimping) Height of capacitor above solder bath Shadowing by neighboring components Additional heating due to heat dissipation by neighboring components Use of solder-resist coatings PleasereadCautionsandwarningsand Page35of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) The overheating associated with some of these factors can usually be reduced by suitable coun- termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. EPCOS recommendations As a reference, the recommended wave soldering profile for our film capacitors is as follows: PleasereadCautionsandwarningsand Page36of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Body temperature should follow the description below: MKP capacitor During pre-heating: T ≤110 °C p During soldering: T ≤120 °C, t ≤45 s s s MKT capacitor During pre-heating: T ≤125 °C p During soldering: T ≤160 °C, t ≤45 s s s When SMD components are used together with leaded ones, the film capacitors should not pass into the SMD adhesive curing oven. The leaded components should be assembled after the SMD curing step. Leaded film capacitors are not suitable for reflow soldering. In order to ensure proper conditions for manual or selective soldering, the body temperature of the capacitor (T ) must be ≤120 °C. s One recommended condition for manual soldering is that the tip of the soldering iron should be <360 °C and the soldering contact time should be no longer than 3 seconds. For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea- sures are recommended: pre-heating to not more than 110 °C in the preheater phase rapid cooling after soldering Please refer to EPCOS Film Capacitor Data Book in case more details are needed. PleasereadCautionsandwarningsand Page37of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Cautions and warnings Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing. Do not exceed the specified time or temperature limits during soldering. Avoid external energy inputs, such as fire or electricity. Avoid overload of the capacitors. Consult us if application is with severe temperature and humidity condition. There are no serviceable or repairable parts inside the capacitor. Opening the capacitor or any attempts to open or repair the capacitor will void the warranty and liability of EPCOS. Please note that the standards referred to in this publication may have been revised in the meantime. The table below summarizes the safety instructions that must always be observed. A detailed de- scription can be found in the relevant sections of the chapters "General technical information" and "Mounting guidelines". Topic Safety information Reference chapter "General technical information" Storage Make sure that capacitors are stored within the specified 4.5 conditions range of time, temperature and humidity conditions. "Storage conditions" Flammability Avoid external energy, such as fire or electricity (passive 5.3 flammability), avoid overload of the capacitors (active "Flammability" flammability) and consider the flammability of materials. Resistance to Do not exceed the tested ability to withstand vibration. 5.2 vibration The capacitors are tested to IEC 60068-2-6:2007. "Resistance to EPCOS offers film capacitors specially designed for vibration" operation under more severe vibration regimes such as those found in automotive applications. Consult our catalog "Film Capacitors for Automotive Electronics". Topic Safety information Reference chapter "Mounting guidelines" Soldering Do not exceed the specified time or temperature limits 1 "Soldering" during soldering. Cleaning Use only suitable solvents for cleaning capacitors. 2 "Cleaning" PleasereadCautionsandwarningsand Page38of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Topic Safety information Reference chapter "Mounting guidelines" Embedding of When embedding finished circuit assemblies in plastic 3 "Embedding of capacitors in resins, chemical and thermal influences must be taken capacitors in finished finished into account. assemblies" assemblies Caution: Consult us first, if you also wish to embed other uncoated component types! Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the or- dering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. PleasereadCautionsandwarningsand Page39of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Symbols and terms Symbol English German α Heat transfer coefficient Wärmeübergangszahl α Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität C A Capacitor surface area Kondensatoroberfläche β Humidity coefficient of capacitance Feuchtekoeffizient der Kapazität C C Capacitance Kapazität C Rated capacitance Nennkapazität R ΔC Absolute capacitance change Absolute Kapazitätsänderung ΔC/C Relative capacitance change (relative Relative Kapazitätsänderung (relative deviation of actual value) Abweichung vom Ist-Wert) ΔC/C Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung R from rated capacitance) vom Nennwert) dt Time differential Differentielle Zeit Δt Time interval Zeitintervall ΔT Absolute temperature change Absolute Temperaturänderung (self-heating) (Selbsterwärmung) Δtan δ Absolute change of dissipation factor Absolute Änderung des Verlustfaktors ΔV Absolute voltage change Absolute Spannungsänderung dV/dt Time differential of voltage function (rate Differentielle Spannungsänderung of voltage rise) (Spannungsflankensteilheit) ΔV/Δt Voltage change per time interval Spannungsänderung pro Zeitintervall E Activation energy for diffusion Aktivierungsenergie zur Diffusion ESL Self-inductance Eigeninduktivität ESR Equivalent series resistance Ersatz-Serienwiderstand f Frequency Frequenz f Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte 1 AC voltage due to thermal limits Reduzierung der zulässigen Wechselspannung f Frequency limit for reducing permissible Grenzfrequenz für strombedingte 2 AC voltage due to current limit Reduzierung der zulässigen Wechselspannung f Resonant frequency Resonanzfrequenz r F Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur D Diffusion F Derating factor Deratingfaktor T i Current (peak) Stromspitze I Category current (max. continuous Kategoriestrom (max. Dauerstrom) C current) PleasereadCautionsandwarningsand Page40of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Symbol English German I (Sinusoidal) alternating current, (Sinusförmiger) Wechselstrom RMS root-mean-square value i Capacitance drift Inkonstanz der Kapazität z k Pulse characteristic Impulskennwert 0 L Series inductance Serieninduktivität S λ Failure rate Ausfallrate λ Constant failure rate during useful Konstante Ausfallrate in der 0 service life Nutzungsphase λ Failure rate, determined by tests Experimentell ermittelte Ausfallrate test P Dissipated power Abgegebene Verlustleistung diss P Generated power Erzeugte Verlustleistung gen Q Heat energy Wärmeenergie ρ Density of water vapor in air Dichte von Wasserdampf in Luft R Universal molar constant for gases Allg. Molarkonstante für Gas R Ohmic resistance of discharge circuit Ohmscher Widerstand des Entladekreises R Internal resistance Innenwiderstand i R Insulation resistance Isolationswiderstand ins R Parallel resistance Parallelwiderstand P R Series resistance Serienwiderstand S S severity (humidity test) Schärfegrad (Feuchtetest) t Time Zeit T Temperature Temperatur τ Time constant Zeitkonstante tan δ Dissipation factor Verlustfaktor tan δ Dielectric component of dissipation Dielektrischer Anteil des Verlustfaktors D factor tan δ Parallel component of dissipation factor Parallelanteil des Verlfustfaktors P tan δ Series component of dissipation factor Serienanteil des Verlustfaktors S T Temperature of the air surrounding the Temperatur der Luft, die das Bauteil A component umgibt T Upper category temperature Obere Kategorietemperatur max T Lower category temperature Untere Kategorietemperatur min t Operating life at operating temperature Betriebszeit bei Betriebstemperatur und OL and voltage -spannung T Operating temperature, T + ΔT Beriebstemperatur, T + ΔT op A A T Rated temperature Nenntemperatur R T Reference temperature Referenztemperatur ref t Reference service life Referenz-Lebensdauer SL PleasereadCautionsandwarningsand Page41of44 Importantnotesattheendofthisdocument.

B32520 ... B32529 General purpose (stacked/wound) Symbol English German V AC voltage Wechselspannung AC V Category voltage Kategoriespannung C V Category AC voltage (Sinusförmige) C,RMS Kategorie-Wechselspannung V Corona-discharge onset voltage Teilentlade-Einsatzspannung CD V Charging voltage Ladespannung ch V DC voltage Gleichspannung DC V Fly-back capacitor voltage Spannung (Flyback) FB V Input voltage Eingangsspannung i V Output voltage Ausgangssspannung o V Operating voltage Betriebsspannung op V Peak pulse voltage Impuls-Spitzenspannung p V Peak-to-peak voltage Impedance Spannungshub pp V Rated voltage Nennspannung R Amplitude of rated AC voltage Amplitude der Nenn-Wechselspannung R V (Sinusoidal) alternating voltage, (Sinusförmige) Wechselspannung RMS root-mean-square value V S-correction voltage Spannung bei Anwendung "S-correction" SC V Snubber capacitor voltage Spannung bei Anwendung sn "Beschaltung" Z Impedance Scheinwiderstand Lead spacing Rastermaß PleasereadCautionsandwarningsand Page42of44 Importantnotesattheendofthisdocument.

Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incum- bent on the customer to check and decide whether an EPCOS product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Ma- terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de- tailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "General Terms of Delivery for Products and Services in the Electrical In- dustry" published by the German Electrical and Electronics Industry Association (ZVEI). Page43of44

Important notes 7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other coun- tries. Further information will be found on the Internet at www.epcos.com/trademarks. Release 2018-06 Page44of44