FIBERExpress 1 Sheet DATA Secure/Keyed LC Optimax The Secure/Keyed LC Optimax field installable Features & Benefits connectors, are part of the Belden IBDN > 6physically discreet, color-coded keying FiberExpress Secure/Keyed LC System. options — provide design flexibility and facilitate network administration The FiberExpress Secure/Keyed LC System allows AX102197 Secure/Keyed LC Optimax for physical segregation of networks segments > Tamper-resistant key design — prevents intruder access in secure fiber cabling infrastructure. The various components offered in this system allow network > Uses the same inexpensive tool kit as for managers to design and build very efficiently a regular Optimax LC installation — facilitating logistics and material ordering secure network with restricted access to sensitive information to specific users only. > All Optimax Multimode 50 µmconnectors contain a Laser-Optimized fiber stub The Secure/Keyed LC Optimax are available (FX2000 fiber) and are also backward with 6 different keying options each carrying compatible with the FX600 series 50 µm fiber types adifferent color to facilitate network adminis- tration. The keying detail inside the connector > No polishing required — saves installation Secure/Keyed LC Optimax – components is totally tamper-resistant and cannot be time and the cost of polishing paper re-produced inside a standard LC connector > No epoxy required — saves installation time, to violate the network security. All other no oven required, safe to use, no power physical requirements comply with the FOCIS required, saves cost of epoxy 10standardand optical performance exceeds > Pre-radiused PC ceramic ferrule — ensures all industry standards for SFF connectors. contact with optical fibers, improves durability,provides high performance The connectorsareavailable in multimode 50 µm > Unlimited shelf life — unlike epoxy products laser-optimized and 62.5 µmfiber versions. which have a tendency to dry out if left on the shelf too long About the Optimax: the Optimax Connectors are reliable field installable optical fiber > Easy connection to learn — Optimax training video on CD offers efficient and consistent connectors that are easy to install. They do not training for field services personnel. require epoxy, curing or polishing. Their unique design incorporates a factory polished fiber stub in a splice mechanism which provides a fast, secure, and reliable termination on optical fiber cables. All critical steps areperformed in the factory, ensuring a superior-quality connection every time. Only simple tools are required for installation, making Optimax a cost effective field termination. The Optimax Optical Fiber Field Installable Connectors are high-quality connectors that use a ceramic ferrule with a physical contact (PC) polish for Multimode connectors. 1-800-BELDEN-1 • www.belden.com

FIBERExpress 2 Sheet DATA Secure/Keyed LC Optimax Applications Technical Specifications Installation Tips > Secure networks in government agencies > Field Assembly Time: 1 minute for > Cleaving the fiber: and military facilities 900 µm, 3 minutes for jacketed fiber Optimax works like a mechanical splice > Data Centers treating sensitive and > Insertion Loss (Multimode): 0.3 dB (typical) and is sensitive to the quality of classified information the fiber cleave > Durability: > Indoor termination of fiber cables Alight touch is all you need to score the Multimode: Less than 0.2 dB change, fiber and consequently cleave it > Patch panels/Distribution frames 500 cycles. Always inspect the cleave with the > Communication outlets, Fiber-to- > Nominal Fiber O.D.: 125 µm microscope: stripping and cleaving the-desk > Storage Temperature: -40°to 65°C should be redone if the fiber end is > Direct termination to equipment (-40°to 149°F) chipped, crushed or at an angle > Fiber cable repair > Operating Temperature: 0°to 60°C Make sure that the length of the bare (32°to 140°F) fiber is between 7.0 and 7.5 mm > Campus (0.27 and 0.3 in.). Verify your measurement > Tensile Load: > Customer premise/Access network. using the installation card. On jacketed fiber: 50 N > Pen mark: Always make a pen mark on (5.1 Kg/11.2 lbs) the fiber buffer before cleaving Cable Color Code On 900 micron tight buffered fiber: > Crimping the fiber: This step is necessary Connector Types Color of connector 6.7 N (0.68 Kg/1.5 lbs). to provide the mechanical strength LC Key1 (0°) Red > Ferrule: Ceramic between the fiber and the connector LC Key2 (240°) Green > Reflectance: > Installation on jacketed fiber: If the LC Key3 (120°) Yellow termination of a breakout cable or dual Multimode: -30 dB (typical). zip cordis contained in an enclosure, LC Key4 (300°) Black Note: All related performance specifications meet follow instructions for terminating on LC Key5 (60°) Orange or exceed TIA/EIA-568-B.3 requirements. 900 µm, it is sufficient, easier and quicker than installation on jacketed fiber LC Key6 (180°) Blue > Safety tips: Always wear safety glasses Dispose waste fiber properly in the waste bottle. > Testing procedure: Use the proper test method such as the one recommended by ANSI/TIA/EIA-568-B, TIA TSB-140 or Belden IBDN acceptance testing notes. 1-800-BELDEN-1 • www.belden.com

FIBERExpress 3 Sheet DATA Secure/Keyed LC Optimax Packaging For More Information > Individually packaged in a clear plastic For any other product information call: bag 1-800-BELDEN-1 or visit us at > Standard shipping packaging is a bag www.Belden.com of 25 units. > Accessory Kit: All information is subject to change without notice, since Belden reserves The LC Accessory Kit contains one 2 mm the right to change its products as progress boot and a crimp sleeve. in engineering and manufacturing methods or other circumstances may warrant. Ordering Information Secure/Keyed LC Optimax “Patent Pending” DETAIL INSTALLATION UPC ORDERING NUMBER Multimode, 50 µm K1, Red for 900 µm buffered fiber only AX102197 K2,Green for 900 µm buffered fiber only AX102198 K3, Yellow for 900 µm buffered fiber only AX102199 K4, Black for 900 µm buffered fiber only AX102200 K5, Orange for 900 µmbuffered fiber only AX102201 K6, Blue for 900 µm buffered fiber only AX102202 Multimode, 62.5 µm K1, Red for 900 µmbuffered fiber only AX102203 K2,Green for 900 µm buffered fiber only AX102204 K3, Yellow for 900 µm buffered fiber only AX102205 K4, Black for 900 µmbuffered fiber only AX102206 K5, Orange for 900 µmbuffered fiber only AX102207 K6, Blue for 900 µm buffered fiber only AX102208 LC Accessory Kit for jacketed fiber containsa2mm boot and a crimp sleeve 628575118045 AX101984 1-800-BELDEN-1 • www.belden.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B elden Wire & Cable: AX102197 AX102198 AX102199 AX102200 AX102201 AX102202 AX102203 AX102204 AX102206 AX102207 AX102208