2.5X2.0mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.2mm Moisture Sensitivity Level (MSL) – This p roduct is not Moisture Sensitive - MSL = 1 FEATURES: APPLICATIONS: • Low resonant impedance • Remote controls, Microprocessor clocks, Mobile • Built-in load capacitors phones, DVD & CD-Roms, Electric appliances • IR reflow capable • Consumer electronics STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Frequency Range 20.00 60.00 MHz 60 20.00 MHz – 25.99 MHz Resonant Impedance (Ro) 50 Ω 26.00 MHz – 35.00 MHz 50 35.01 MHz – 60.00 MHz 10 – 20% 10 10 + 20% 20.00 MHz – 25.99 MHz Built-in Load Capacitance (C1=C2) 5 – 20% 5 5 + 20% pF 26.00 MHz – 35.00 MHz 5 – 20% 5 5 + 20% 35.01 MHz – 60.00 MHz Frequency Tolerance @25 ºC -0.5 0.5 % Frequency Stability @ -25ºC to +85ºC -0.2 0.2 % Withstanding Voltage 50 V DC , 1 min (1) D.C.Voltage 6 V Rating Voltage (2) A.C. Voltage 15 Vp-p. Insulation Resistance 100 MΩ 10V, 1min Operation Temperature -25 85 ºC Storage Temperature -55 85 ºC Aging Rate (Fosc) (10 years) -0.2 0.2 % From Initial Value OPTIONS AND PART IDENTIFICATION: Frequency Load Capacitance Packaging Contact ABRACON for T: 3000pcs/Reel Frequency in MHz Built-in Capacitance options Revised: 08.08.14 Visit www.abracon.com for Terms & Conditions of Sale AABBRRAACCOONN IISS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CCEERRTTIIFFIIEEDD tel 949-546-8000 | fax 949-546-8001| www.abracon.com

2.5X2.0mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.2mm TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure X: Ceramic Resonator C1=C2: 10pF ±20% ( 20.00MHz~25.99MHz) 5pF ±20% (26.00MHz~35.00MHz) 5pF ±20% (35.01MHz~60.00MHz) OUTLINE DIMENSION: Recommended Land Pattern 1.2 max ：Land Pattern Dimension: mm Revised: 08.08.14 Visit www.abracon.com for Terms & Conditions of Sale AABBRRAACCOONN IISS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CCEERRTTIIFFIIEEDD tel 949-546-8000 | fax 949-546-8001| www.abracon.com

2.5X2.0mm INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-CW RoHS/RoHS II compliant Pb in ceramic, exemption (7c-I) 2.5 x 2.0 x 1.2mm SUGGESTED REFLOW PROFILE TAPE & REEL: T: tape and reel (3,000pcs/reel) ФA ФB W T Carrier tape size 180 ±3 60 min. 8.4 min 12.4 max 8 Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed Dimension: mm in airtight packaging according to MSL 1 requirements to maintain solderability. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high- reliability, life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Appl ications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high relia bility where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environ- ment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Revised: 08.08.14 Visit www.abracon.com for Terms & Conditions of Sale AABBRRAACCOONN IISS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CCEERRTTIIFFIIEEDD tel 949-546-8000 | fax 949-546-8001| www.abracon.com