Type AVRF –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Type AVRF Capacitors are the best and by a wide margin. With 40% to 60% lower impedance, 30% to 50% smaller case size and more than twice the life compared to low-ESR type AFC, the Type AVRF also excels at cold performance down to –55 °C. In addition, this terrific low- impedance performance, approaching low-ESR tantalum capacitors, is at a significant cost savings compared to tantalum. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltageE derating. Highlights • +105 °C, Up to 5000 Hour Load Life • Ultra-low Impedance T • Voltage Range: 6.3 Vdc to 35 Vdc Specifications E Operating Temperature: –55 °C to +105 °C Rated Voltage: 6.3, 10, 16, 25, 35 Vdc Capacitance: 4.7 µF to 1500 µF Capacitance Tolerance: ±20% @ 120 Hz and +20 L°C Leakage Current: 0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater) Low Temperature Characteristics @ 120 Hz: Rated VoltaOge (Vdc) 6.3 10 16 25 35 Z(-25ºC)/Z(+20ºC) 2 2 2 2 2 Impedance Complies with the EU Z(-40ºC)/Z(+20ºC) 3 3 3 3 3 Ratio Directive 2002/95/EC re- Z(-55ºC)/Z(+20ºC) 4 4 4 3 3 quirement restricting the S use of Lead (Pb), Mercu- Dissipation Factor: ry (Hg), Cadmium (Cd), 6.3V 10 V 16 V 25 V 35 V Hexavalent chromium (Cr(VI)), PolyBrominat- 0.26 0.19 0.16 0.14 0.12 ed Biphenyls (PBB) and B PolyBrominated Diphenyl Ethers (PBDE). Life Test: 2000 h @ 105 °C, 4.0 — 6.3 mm dia. Shelf Test: 1000 h @ 105 °C 5000 h @ 1O05 °C, 8.0 — 10.0 mm dia. ∆ Capacitance ±30% (10 mm Dia.: ±35%) ∆ Capacitance ±30% (10 mm Dia.: ±35% DF: ≤ 200% of limit (10 mm Dia.: ≤300%) DF: ≤ 200% of limit (10 mm Dia.: ≤300%) DCL: ≤ 100% of limit DCL: ≤ 100% of limit Part Numbering System AVRF 106 M 16 B 12T –F Type Capacitance Capacitance Voltage Code Case Packaging Code RoHS AVRF 475 = 4.7 µF Tolerance 06 = 6.3 Vdc 25 = 25 Vdc Code 12 = Carrier tape Compliant 106 = 10.0 µF M = ±20% 10 = 10 Vdc 35 = 35 Vdc Width (mm) 107 = 100.0 µF 16 = 16 Vdc T = Tape & Reel 108 = 1000.0 µF CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type AVRF –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Outline Drawing & Marking (4.0 - 6.3 mm Dia.) (8.0 - 10.0 mm Dia.) E T Case Dimensions E Case D ± .05 L B, C A W E K Code (mm) (mm) (mm) (ref) (mm) (ref) (mm) B 4.0 5.4 ± 0.2 4.3 1.8 0.65 ±0.1 1.0 0.35 +0.15/–0.20 L C 5.0 5.4 ± 0.3 5.3 2.2 0.65 ±0.1 1.5 0.35 +0.15/–0.20 D 6.3 5.4 ± 0.2 6.6 2.6 0.65 ±0.1 1.8 0.35 +0.15/–0.20 F 8.0 10.2 ± 0.5 8.3 O3.4 0.90 ±0.2 3.1 0.70 ±0.20 G 10.0 10.2 ± 0.5 10.3 3.5 0.90 ±0.2 4.6 0.70 ±0.20 Ratings S Max. Ripple B Catalog Max. DCL Max. DF Max. E.S.R. Max. Impedance Current Case Size Quantity Cap. Part Number 2 min. @ 120Hz/20ºC @ 100kHz/20ºC @ 100kHz/20ºC @ 100kHz/105ºC Code DxL /Reel (µF) (µA) (Ω) (Ω) (mA) (mm) (Ea) 6.3 Vdc O 22 AVRF226M06B12T-F 3.0 0.26 1.65 1.65 70 B 4x5.4 2000 47 AVRF476M06B12T-F 3.0 0.26 1.65 1.65 70 B 4x5.4 2000 100 AVRF107M06C12T-F 6.3 0.26 0.90 0.90 100 C 5x5.4 1000 220 AVRF227M06D16T-F 13.9 0.26 0.50 0.50 160 D 6.3x5.4 1000 470 AVRF477M06F24T-F 29.6 0.26 0.16 0.16 600 F 8x10.2 500 1000 AVRF108M06F24T-F 63.0 0.26 0.16 0.16 600 F 8x10.2 500 1500 AVRF158M06G24T-F 94.5 0.26 0.08 0.08 850 G 10x10.2 500 10 Vdc 22 AVRF226M10B12T-F 3.0 0.19 1.65 1.65 70 B 4x5.4 2000 33 AVRF336M10B12T-F 3.3 0.19 1.65 1.65 70 B 4x5.4 2000 150 AVRF157M10D16T-F 15.0 0.19 0.50 0.50 160 D 6.3x5.4 1000 330 AVRF337M10F24T-F 33.0 0.19 0.16 0.16 600 F 8x10.2 500 470 AVRF477M10F24T-F 47.0 0.19 0.16 0.16 600 F 8x10.2 500 1000 AVRF108M10G24T-F 100.0 0.19 0.08 0.08 850 G 10x10.2 500 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type AVRF –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Max. Ripple Catalog Max. DCL Max. DF Max. E.S.R. Max. Impedance Current Case Size Quantity Cap. Part Number 2 min. @ 120Hz/20ºC @ 100kHz/20ºC @ 100kHz/20ºC @ 100kHz/105ºC Code DxL /Reel (µF) (µA) (Ω) (Ω) (mA) (mm) (Ea) 16 Vdc 10 AVRF106M16B12T-F 3.0 0.16 1.65 1.65 70 B 4x5.4 2000 22 AVRF226M16B12T-F 3.5 0.16 1.65 1.65 70 B 4x5.4 2000 47 AVRF476M16C12T-F 7.5 0.16 0.90 0.90 100 C 5x5.4 1000 E 68 AVRF686M16D16T-F 10.9 0.16 0.50 0.50 160 D 6.3x5.4 1000 330 AVRF337M16F24T-F 52.8 0.16 0.16 0.16 600 F 8x10.2 500 470 AVRF477M16F24T-F 75.2 0.16 0.16 0.16 600 F 8x10.2 500 25 Vdc T 10 AVRF106M25B12T-F 3.0 0.14 1.65 1.65 70 B 4x5.4 2000 22 AVRF226M25C12T-F 5.5 0.14 0.90 0.90 100 C 5x5.4 1000 33 AVRF336M25D16T-F 8.3 0.14 0.50 0.50 160 D 6.3x5.4 1000 47 AVRF476M25D16T-F 11.8 0.14 0.50 0.50 E 160 D 6.3x5.4 1000 68 AVRF686M25D16T-F 17.0 0.14 0.50 0.50 160 D 6.3x5.4 1000 150 AVRF157M25F24T-F 37.5 0.14 0.16 0.16 600 F 8x10.2 500 220 AVRF227M25F24T-F 55.0 0.14 0.16 0.16 600 F 8x10.2 500 L 330 AVRF337M25F24T-F 82.5 0.14 0.16 0.16 600 F 8x10.2 500 470 AVRF477M25G24T-F 117.5 0.14 0.08 0.08 850 G 10x10.2 500 35 Vdc O 4.7 AVRF475M35B12T-F 3.0 0.12 1.65 1.65 70 B 4x5.4 2000 10 AVRF106M35C12T-F 3.5 0.12 0.90 0.90 100 C 5x5.4 1000 22 AVRF226M35D16T-F 7.7 0.12 0.50 0.50 160 D 6.3x5.4 1000 33 AVRF336M35D16T-F 11.6 0.12 0.50 0.50 160 D 6.3x5.4 1000 47 AVRF476M35F24T-F 16.5 0.12 S 0.16 0.16 600 F 8x10.2 500 100 AVRF107M35F24T-F 35.0 0.12 0.16 0.16 600 F 8x10.2 500 150 AVRF157M35F24T-F 52.5 0.12 0.16 0.16 600 F 8x10.2 500 220 AVRF227M35F24T-F 77.0 0.12 0.16 0.16 600 F 8x10.2 500 B 330 AVRF337M35G24T-F 115.5 0.12 0.08 0.08 850 G 10x10.2 500 Recommended Land Patterns by case size for AVRF series O B A B C Case Case Land Dimensions (mm) Code Size C B A B 4x5.4 1.6 2.6 1.0 C 5x5.4 1.6 3.0 1.4 D 6.3x5.4 1.6 3.5 1.9 F 8x10.2 2.5 3.5 3.0 G 10x10.2 2.5 4.0 4.0 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type AVRF –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Recommended Soldering methods Recommended Reflow Soldering Profiles: E For case diameters 4 thru 6.3 mm T E L O For 8 mm case diameter S B O For 10 mm case diameter Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Type AVRF –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for suEch applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. T The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given E gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state L of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the O failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. S B O CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com