图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: AT24MAC602-STUM-T
  • 制造商: Atmel
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

AT24MAC602-STUM-T产品简介:

ICGOO电子元器件商城为您提供AT24MAC602-STUM-T由Atmel设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 AT24MAC602-STUM-T价格参考。AtmelAT24MAC602-STUM-T封装/规格:存储器, EEPROM 存储器 IC 2Kb (256 x 8) I²C 1MHz 550ns SOT-23-5。您可以下载AT24MAC602-STUM-T参考资料、Datasheet数据手册功能说明书,资料中有AT24MAC602-STUM-T 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

集成电路 (IC)

描述

IC EEPROM 2KBIT 1MHZ SOT23-5

产品分类

存储器

品牌

Atmel

数据手册

点击此处下载产品Datasheet点击此处下载产品Datasheet

产品图片

产品型号

AT24MAC602-STUM-T

rohs

无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

-

供应商器件封装

SOT-23-5

其它名称

AT24MAC602-STUM-TDKR

包装

Digi-Reel®

存储器类型

EEPROM

存储容量

2K (256 x 8)

封装/外壳

SC-74A,SOT-753

工作温度

-40°C ~ 85°C

应用说明

点击此处下载产品Datasheet

接口

I²C,2 线串口

标准包装

1

格式-存储器

EEPROM - 串行(带 MAC 地址)

特色产品

http://www.digikey.cn/product-highlights/cn/zh/atmel-at24mac-at24cs-eeprom-devices/2284

电压-电源

1.7 V ~ 5.5 V

速度

400kHz,1MHz

推荐商品

型号:SST39VF3201B-70-4C-EKE

品牌:Microchip Technology

产品名称:集成电路(IC)

获取报价

型号:AS8C403625-QC75N

品牌:Alliance Memory, Inc.

产品名称:集成电路(IC)

获取报价

型号:25LC320AT-E/SN

品牌:Microchip Technology

产品名称:集成电路(IC)

获取报价

型号:MT46H8M16LFCF-10 IT TR

品牌:Micron Technology Inc.

产品名称:集成电路(IC)

获取报价

型号:AS4C4M16S-6TCNTR

品牌:Alliance Memory, Inc.

产品名称:集成电路(IC)

获取报价

型号:93AA46/SN

品牌:Microchip Technology

产品名称:集成电路(IC)

获取报价

型号:70V28L15PFG

品牌:IDT, Integrated Device Technology Inc

产品名称:集成电路(IC)

获取报价

型号:93LC66A/SN

品牌:Microchip Technology

产品名称:集成电路(IC)

获取报价

样品试用

万种样品免费试用

去申请
AT24MAC602-STUM-T 相关产品

PC28F640P30T85A

品牌:Micron Technology Inc.

价格:

R1LV1616RSD-7SI#B0

品牌:Renesas Electronics America

价格:

CY7C2663KV18-550BZXC

品牌:Cypress Semiconductor Corp

价格:¥2574.23-¥3276.29

MT46V32M16FN-6 IT:C TR

品牌:Micron Technology Inc.

价格:

AT28C040-25FI

品牌:Microchip Technology

价格:

IS62WV2568BLL-70HI-TR

品牌:ISSI, Integrated Silicon Solution Inc

价格:

STK11C88-SF45ITR

品牌:Cypress Semiconductor Corp

价格:

AT27C4096-55JU

品牌:Microchip Technology

价格:

PDF Datasheet 数据手册内容提取

AT24MAC402 and AT24MAC602 I2C-Compatible (2-wire) 2-Kbit Serial EEPROM with a Factory-Programmed EUI-48™ or EUI-64™Address Plus an Embedded Unique 128-bit Serial Number 2-Kbit (256 x 8) DATASHEET Standard Serial EEPROM Features  Low-voltage Operation ̶ 1.7V Minimum (V = 1.7V to 5.5V) CC  Internally Organized as 256 x 8 (2K)  I2C-compatible (2-wire) Serial Interface  Schmitt Trigger, Filtered Inputs for Noise Suppression  Bi-directional Data Transfer Protocol  400kHz (1.7V) and 1MHz (2.5V, 5.0V) Compatibility  Write Protect Pin for Hardware Data Protection of the Entire Array  Permanent and Reversible Software Write Protection for the First-half of the Array ̶ Software Procedure to Verify Write Protect Status  16-byte Page Write Modes ̶ Partial Page Writes Allowed  Self-timed Write Cycle (5ms max)  High-reliability ̶ Endurance: 1,000,000 Write Cycles ̶ Data Retention: 100 Years  Green Package Options (PB/Halide-free/RoHS Compliant) ̶ 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 5-lead SOT23  Die Sale Options: Wafer Form and Tape and Reel Enhanced Features in the MAC Serial EEPROM Family  Factory-programmed EUI-48 or EUI-64 Compatible Address ̶ Permanently Locked, Read-only Value ̶ Stored in a Separate Memory Area ̶ Guaranteed Unique EUI Address  Custom Programming Services Available ̶ Manage and Program Customer’s IEEE Assigned OUI  Unique Factory-programmed 128-bit Serial Number ̶ Unique for all Atmel® AT24CS, AT93CS, and AT25S Series Serial EEPROMs ̶ Permanently Locked, Read-only Value ̶ Stored in a Separate Memory Area Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

1. Description The Atmel AT24MAC402 and AT24MAC602 provides 2048 bits of Serial Electrically-Erasable Programmable Read-Only Memory (EEPROM) organized as 256 words of eight bits each and is accessed via an I2C-compatible (2-wire) serial interface. In addition, AT24MAC402/602 incorporates an easy and inexpensive method to obtain a globally unique MAC or EUI address (EUI-48 or EUI-64). AT24MAC402 is an EUI-48 compatible device that contains a 48-bit EUI address, and AT24MAC602 is an EUI-64 compatible device that contains a 64-bit EUI address. The EUI-48 and EUI-64 addresses can be assigned as the actual physical address of a system hardware device or node or it can be assigned to a software instance. These addresses are factory programmed by Atmel and permanently write protected in an extended memory block located outside of the standard 2-Kbit bit memory array. In addition, the AT24MAC402/602 provides the value added feature of a factory-programmed, guaranteed unique 128-bit serial number located in the extended memory block (same area as the EUI address values). The serial number is Atmel factory-programmed and permanently write protected. This 128-bit serial number is compatible with all AT24CS, AT93CS, and AT25S family serial numbers, therefore, providing guaranteed unique serial numbers for any application that is also using Atmel Serial EEPROMs. The first-half of the AT24MAC402/602 incorporates a permanent and a reversible software write protection feature while a hardware write protect feature for the entire array is available via an external pin. The permanent software write protection is enabled by sending a special command to the device. This protection cannot be reversed once executed. However, the reversible software write protection can be reversed by sending and executing a special command. The hardware write protection is controlled by the WP pin state and can be used to protect the entire array regardless of whether or not the software write protection has been enabled. The software and hardware write protection features allow the user the flexibility to protect no portion of the memory, the first-half of the memory, or the entire memory array depending on the specific needs of the application. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The AT24MAC402/602 is available in space saving 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 5-lead SOT23 packages. Both devices operate across a wide supply voltage range from 1.7V to 5.5V V . CC 2 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

2. Pin Configurations and Pinouts Figure 1. Pin Configurations 8-lead SOIC 8-lead TSSOP Pin Name Function (Top View) (Top View) A -A AddressInputs 0 2 A0 1 8 VCC A0 1 8 VCC SDA SerialData A1 2 7 WP A1 2 7 WP A2 3 6 SCL GNAD2 34 65 SSCDLA SCL SerialClockInput GND 4 5 SDA WP WriteProtect 8-pad UDFN 5-lead SOT23 GND Ground (Top View) (Top View) VCC PowerSupply A0 1 8 VCC SCL 1 5 WP A1 2 7 WP A2 3 6 SCL GND 2 GND 4 5 SDA SDA 3 4 VCC Notes: 1. For use of the 5-lead SOT23, the software A2, A1, and A0 bits in the device address word must be set to zero to properly communicate with the device since the A , A , and A pins are not bonded out. Some functionality 2 1 0 is not possible due to these pins not being available. See “Write Protection” on page 15 for more details. 2. Drawings are not to scale. 3. Absolute Maximum Ratings* Operating Temperature . . . . . . . . . . .-55°C to +125°C *Notice: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage Storage Temperature. . . . . . . . . . . . .-65°C to +150°C to the device. This is a stress rating only and functional operation of the device at these or any Voltage on any pin other conditions beyond those indicated in the with respect to ground . . . . . . . . . . . . . -1.0V to +7.0V operational sections of this specification is not implied. Exposure to absolute maximum rating Maximum Operating Voltage . . . . . . . . . . . . . . . 6.25V conditions for extended periods may affect device DC Output Current. . . . . . . . . . . . . . . . . . . . . . .5.0mA reliability. AT24MAC402/602 [DATASHEET] 3 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

4. Block Diagram Figure 4-1. Block Diagram V CC GND WP Start SCL Stop SDA Logic Serial High Voltage Enable Control Pump & Timing Logic Data Latches Device Load COMP Address INC Comparator r Data Word e d Read/Write ADDR/Counter o A c EEPROM 2 e D Array A1 w 128-bit o A R 0 Serial Read Number MAC-48 Column Serial MUX EUI-48 Decoder EUI-64 Read Address D / ACK OUT Logic D D IN OUT 4 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

5. Pin Description Serial Clock (SCL): The SCL input is used to positive edge clock data into each EEPROM device and negative edge clock data out of each device. Serial Data (SDA): The SDA pin is bidirectional for serial data transfer. This pin is open-drain driven and may be wire-ORed with any number of other open-drain or open collector devices. Device Addresses (A , A , A ): The A , A , and A pins are device address inputs that are hard wired for the 0 1 2 0 1 2 AT24MAC402/602. As many as eight 2K devices may be addressed on a single bus system. Device addressing is discussed in detail in Section 9., “Device Addressing” on page 13. Write Protect (WP): The AT24MAC402/602 has a Write Protect pin that provides hardware data protection. When the Write Protect pin is connected to ground (GND), normal Read/Write operations to the full array are possible. When the Write Protect pin is connected to V , all write operations to the memory are inhibited, but CC read operations are still possible. However, due to capacitive coupling that may appear during customer applications, Atmel recommends always connecting the WP pins to a known state. When using a pull-up resistor, Atmel recommends using 10k or less. The write protection operation is summarized in Table 5-1 below. 5.1 Write Protection Modes Table 5-1. Write Protection Modes Permanent Write Protect Reversible Write Protect Part of the Array Write WP Pin Status Register Register Protected V — — Full Array (2K) CC GND or Floating Not Programmed Not Programmed Normal Read/Write GND or Floating Programmed — First-half of Array GND or Floating — Programmed First-half of Array AT24MAC402/602 [DATASHEET] 5 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

6. Electrical Characteristics 6.1 Pin Capacitance Table 6-1. Pin Capacitance(1) Symbol Test Condition Max Units Conditions C Input/Output Capacitance (SDA) 8 pF V = 0V I/O I/O C Input Capacitance (A , A , A , SCL) 6 pF V = 0V IN 0 1 2 IN Note: 1. This parameter is characterized and is not 100% tested. 6.2 DC Characteristics Table 6-2. DC Characteristics Applicable over recommended operating range from: T = -40°C to +85°C, V = 1.7V to 5.5V (unless otherwise noted). AI CC Symbol Parameter Test Condition Min Typ Max Units V Supply Voltage 1.7 5.5 V CC I Supply Current V = 5.0V Read at 400kHz 0.4 1.0 mA CC1 CC I Supply Current V = 5.0V Write at 400kHz 2.0 3.0 mA CC2 CC I Standby Current V = 1.7V V = V or V 1.0 μA SB1 CC IN CC SS I Standby Current V = 2.5V V = V or V 2.0 μA SB2 CC IN CC SS I Standby Current V = 5.5V V = V or V , A = V 6.0 μA SB3 CC IN CC SS 0 SS I Input Leakage Current V = V or V 0.10 3.0 μA LI IN CC SS I Output Leakage Current V = V or V 0.05 3.0 μA LO OUT CC SS V Input Low Level(1) -0.6 V x 0.3 V IL CC V Input High Level(1) V x 0.7 V + 0.5 V IH CC CC V Output Low Level V = 1.7V I = 0.15mA 0.2 V OL1 CC OL V Output Low Level V = 3.0V I = 2.1mA 0.4 V OL2 CC OL Note: 1. V min and V max are reference only and are not tested. IL IH 6 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

6.3 AC Characteristics Table 6-3. AC Characteristics 1.7V 2.5V, 5.0V Symbol Parameter Min Max Min Max Units f Clock Frequency, SCL 400 1000 kHz SCL t Clock Pulse Width Low 1.2 0.4 μs LOW t Clock Pulse Width High 0.6 0.4 μs HIGH t Noise Suppression Time(1) 100 50 ns I t Clock Low to Data Out Valid 0.1 0.9 0.05 0.55 μs AA Time the bus must be free before a new t 1.3 0.5 μs BUF transmission can start.(1) t Start Hold Time 0.6 0.25 μs HD.STA t Start Set-up Time 0.6 0.25 μs SU.STA t Data In Hold Time 0 0 μs HD.DAT t Data In Set-up Time 100 100 ns SU.DAT t Inputs Rise Time(1) 0.3 0.3 μs R t Inputs Fall Time(1) 300 100 ns F t Stop Set-up Time 0.6 0.25 μs SU.STO t Data Out Hold Time 50 50 ns DH t Write Cycle Time 5 5 ms WR Endurance(1) 25°C, Page Mode, 3.3V 1,000,000 Write cycles Note: 1. This parameter is characterized and is not 100% tested. Figure 6-1. Bus Timing SCL Serial Clock, SDA: Serial Data I/O SCL SDA IN SDA OUT AT24MAC402/602 [DATASHEET] 7 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

7. Memory Organization AT24MAC402/602, 2K Serial EEPROM: The 2-Kbit memory array is internally organized as 16 pages of 16 bytes of EEPROM each. Random word addressing requires a 8-bit data word address. EUI Address and Serial Number: The 48-bit EUI address in the AT24MAC402 and the 64-bit EUI address in the AT24MAC602 are located in the extended memory block. In addition, the serial number data is also located in the extended memory block as shown below in Figure 7-1. These EUI-48 or EUI-64 addresses are stored in a dedicated read-only EEPROM memory block located outside the standard 2K memory array as shown below. This means the full standard 2-Kbit EEPROM array is available for use as opposed to solutions where only half of the EEPROM memory array is available for application usage. Figure 7-1. Memory Organization Permanent or Reversible Software First-half Write Protection Capable or Standard Address Range (00h-7Fh) Full Array Hardware 2-Kbit Write Protection Capable EEPROM Device Address ‘1010’ Second-half Full Array Hardware Write Protection Address Range (80h-FFh) Capable Extended 128-bit Serial Number Read-only Memory Address Range (80h-8Fh) Device A ddress ‘1011’ EUI-48/64 Value EUI-48 Address Range (9Ah-9Fh) Read-only EUI-64 Address Range (98h-9Fh) The EUI-48 and EUI-64 address fields contain either six or eight bytes respectively. The first three bytes of the EUI read-only address field are called the Organizationally Unique Identifier (OUI) and the IEEE Registration Authority has assigned FCC23Dh as the Atmel, OUI. Following the OUI, the remaining bytes are called the Extension Identifier and will be either three bytes or five bytes depending on if it is an EUI-48 address (AT24MAC402) or EUI-64 address (AT24MAC602). Atmel generates this unique 24-bit/40-bit data value along with the OUI to guarantee a globally unique EUI address value and programs it at the factory before permanently locking the extended memory region. 8 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

7.1 EUI-48 Support The EUI-48 address is stored in the last six bytes of the AT24MAC402’s extended memory block as shown in Table 7-1. For information on the protocol to read the EUI-48 value, see Section 9., “Device Addressing” on page 13 and Section 12., “Read Operations” on page 19. Table 7-1. 48-Bit EUI Address Memory Map Example 48-Bit EUI Description 24-Bit OUI 24-Bit Extension Identifier Memory Address 9Ah 9Bh 9Ch 9Dh 9Eh 9Fh EUI Data Value FCh C2h 3Dh Byte 1 Byte 2 Byte 3 Using an EUI-48 Value in an EUI-64 Application: An EUI-64 compatible value can be generated from the EUI-48 value contained in the AT24MAC402 by concatenating the 24-bit OUI, an FFFEh data value, and the 24-bit Extension Identifier. This is commonly referred to as an Encapsulated EUI-48 value. However, Atmel recommends using the AT24MAC602 which contains a true EUI-64 value so that post read processing is not required by the application. 7.2 EUI-64 Support For applications that utilize an EUI-64 standard, the EUI-64 address is stored in the last eight bytes of the AT24MAC602’s extended memory block. Similar to EUI-48, the EUI-64 standard consists of the same three byte OUI coupled with a five byte extension identifier (Table 7-2). Atmel generates this unique 40-bit data value coupled with the OUI to guarantee a globally unique 64-bit EUI value and requires no additional data manipulation like other solutions where the application must manually insert a two byte FFFEh value in between the OUI and Extension Identifier. For information on how to read the EUI read protocol, see See Section 9., “Device Addressing” on page 13 and “Read Operations” on page 19. Table 7-2. 64-Bit EUI Address Memory Map Example 64-Bit EUI Description 24-Bit OUI 40-Bit Extension Identifier Memory Address 98h 99h 9Ah 9Bh 9Ch 9Dh 9Eh 9Fh EUI Data Value FCh C2h 3Dh Byte 1(1) Byte 2(1) Byte 3 Byte 4 Byte 5 Note: 1. The data values FFFEh and FFFFh are prohibited beginning from the 40-bit Extension Identifier in Byte 1 and Byte 2. These values are reserved for denoting an encapsulated MAC-48 or EUI-48 value for use in an EUI-64 environment. 7.3 Non-Atmel OUI Programming Option For customers with their own IEEE-assigned OUI or Company ID, Atmel offers the time saving option to manage and deliver custom AT24MAC402/602 devices with their EUI-48/64 values uniquely pre-programmed at delivery. Contact your local Atmel Sales Office for additional information. AT24MAC402/602 [DATASHEET] 9 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

8. Device Operation Clock and Data Transitions: The SDA pin is normally pulled high with an external component such as a pull-up resistor. Data on the SDA pin may change only during SCL low time periods. Data changes during SCL high periods will indicate a Start or Stop condition as defined below. Figure 8-1. Data Validity SDA SCL Data Stable Data Stable Data Change Start Condition: A high-to-low transition of SDA with SCL high is a Start condition which must precede any other command. Stop Condition: A low-to-high transition of SDA with SCL high is a Stop condition. After a read sequence, the stop command will place the EEPROM in a standby power mode. Figure 8-2. Start and Stop Condition SDA SCL Start Stop 10 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Acknowledge: All addresses and data words are serially transmitted to and from the EEPROM in 8-bit words. The EEPROM sends a zero to acknowledge that it has received each word. This happens during the ninth clock cycle. Figure 8-3. Output Acknowledge SCL 1 8 9 Data IN Data OUT Start Acknowledge Standby Mode: The AT24MAC402/602 features a low-power standby mode which is enabled upon  Power-up or  After the receipt of the Stop condition and the completion of any internal operations. 2-Wire Software Reset: After an interruption in protocol, power loss or system reset, any 2-wire part can be reset by following these steps: 1. Create a Start condition (if possible). 2. Clock nine cycles. 3. Create another Start condition followed by Stop condition as shown below. The device should be ready for the next communication after above steps have been completed. In the event that the device is still non-responsive or remains active on the SDA bus, a power cycle must be used to reset the device. Figure 8-4. Software Reset Dummy Clock Cycles SCL 1 2 3 8 9 Start Start Stop Condition Condition Condition SDA AT24MAC402/602 [DATASHEET] 11 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Figure 8-5. Write Cycle Timing SCL Serial Clock, SDA: Serial Data I/O SCL SDA 8th bit ACK WordN (1) t WR Stop Start Condition Condition Note: 1. The write cycle time t is the time from a valid Stop condition of a write sequence to the end of WR the internal clear/write cycle. 12 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

9. Device Addressing Standard EEPROM Access: The 2K EEPROM requires an 8-bit device address word following a start condition to enable the chip for a read or write operation (see Figure 10-1 on page 14). The device address word consists of a mandatory one-zero sequence for the first four most-significant bits ‘1010’(Ah) for normal read and write operations and ‘0110’ (6h) for writing to the Software Write Protect Register. The next three bits in the protocol sequence are the A2, A1, and A0 device address bits. These three bits must match their corresponding hard-wired input pins A , A , and A in order for the part to acknowledge. 2 1 0 The eighth bit of the device address is the read/write operation select bit. A read operation is initiated if this bit is high, and a write operation is initiated if this bit is low. Upon a compare of the device address, the EEPROM will output a zero. If a compare is not made, the device will return to a standby state. The device will not acknowledge if the Write Protect Register has been programmed and the control code is ‘0110’(6h). Serial Number Access: The AT24MAC402/602 incorporates an extended memory block containing a factory-programmed 128-bit serial number. Access to this memory location is obtained by beginning the device address word with a ‘1011’(Bh) sequence. The behavior of the next three bits (A2, A1, and A0) remain the same as during a standard memory addressing sequence. The eighth bit of the device address needs to be set to a one to read the serial number. A zero in this bit position, other than during a dummy write sequence to set the address pointer, will result in a unknown condition and behavior. Writing or altering the 128-bit serial number is not possible as it is permanently write protected. Further specific protocol is needed to address the serial number feature of the part. For more details on accessing this special feature, See Section 12., “Read Operations” on page 19. EUI Address Access: The AT24MAC402/602 utilizes an extended memory block containing a factory-programmed read-only EUI-48 or EUI-64 address respectively. Access to this memory block is obtained by beginning the device address word with a ‘1011’ (Bh) sequence. The behavior of the next three bits (A2, A1, and A0) remain the same as during a standard memory addressing sequence. The eighth bit of the device address needs to be set to a one to read the EUI address. A zero in this bit position, other than during a dummy write sequence to set the address pointer, will result in a unknown condition and behavior. Attempting to write or alter the EUI address is not possible as it is permanently write protected. Further specific protocol is needed to address this feature of the part. For more details on accessing this special feature, see Section 12., “Read Operations”. Table 9-1. Device Address Access Area Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 EEPROM 1 0 1 0 A A A R/W 2 1 0 EUI or Serial Number Read 1 0 1 1 A A A 1 2 1 0 AT24MAC402/602 [DATASHEET] 13 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

10. Write Operations Byte Write: A Byte Write operation requires an 8-bit data word address following the device address word and acknowledgment. Upon receipt of this address, the EEPROM will again acknowledge or respond with a zero and then clock in the first 8-bit data word. Following receipt of the 8-bit data word, the EEPROM will output a zero and the addressing device, such as a microcontroller, must terminate the write sequence with a Stop condition. At this time, the EEPROM enters an internally-timed write cycle, t , to the nonvolatile memory. All WR inputs are disabled during this write cycle and the EEPROM will not respond until the write is complete. The device will acknowledge a write command, but not write the data if the software or hardware write protection has been enabled. The write cycle time must be observed even when the write protection is enabled. Figure 10-1. Byte Write S W T R S A I T R Device T Word O T Address E Address Data P SDA LINE M L R A A A S S / C C C B BW K K K Page Write: The AT24MAC402/602 is capable of a 16-byte Page Write. A Page Write is initiated by the same method as a Byte Write, but the microcontroller does not send a Stop condition after the first data word is clocked in. Instead, after the EEPROM acknowledges receipt of the first data word, the microcontroller can transmit up to fifteen more data words. The EEPROM will respond with a zero after each data word received. The microcontroller must terminate the page write sequence with a Stop condition. The lower four data word address bits are internally incremented following the receipt of each data word. The higher data word address bits are not incremented, retaining the memory page row location. When the internally generated word address reaches the page boundary, the next byte is placed at the beginning of the same page. If more than sixteen data words are transmitted to the EEPROM, the data word address will roll-over and previous data will be overwritten. The address roll-over during write is from the last byte of the current page to the first byte of the same page. The device will acknowledge a write command, but will not write the data if the software or hardware write protection has been enabled. The write cycle time must be observed even when the write protection is enabled. Figure 10-2. Page Write S W T R S A I T R Device T Word O T Address E Address Data (n) Data (n + 1) Data (n + x) P SDA LINE M L R A A A A A S S / C C C C C B BW K K K K K Acknowledge Polling: Once the internally-timed write cycle has started and the EEPROM inputs are disabled, acknowledge polling can be initiated. This involves sending a Start condition followed by the device address word. The read/write bit is representative of the operation desired. Only if the internal write cycle has completed will the EEPROM respond with a zero allowing the read or write sequence to continue. 14 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

11. Write Protection Once enabled, the Software Write Protection write protects only the first-half of the array (00h - 7Fh) while the hardware write protection, via the WP pin, is used to protect the entire array (see Table 11-2 on page 16). Permanent Software Write Protection (PSWP): The Permanent Software Write Protection is enabled by sending a command to the device, similar to a normal write command, which programs the Permanent Write Protect Register. This must be done with the WP pin low. The Write Protect Register is programmed by sending a write command with the device address of ‘0110’(6h) instead of ‘1010’ (Ah) with the address and data bit(s) being don’t cares. The write cycle time must be observed. Once the permanent software write protection has been enabled, the device will no longer acknowledge the ‘0110’ (6h) control byte and cannot be reversed even if the device is powered down. The Permanent Software Write Protection can only be invoked on a SOT23 packaged device with the A2, A1, and A0 bits set to zero. Figure 11-1. Setting Permanent Write Protect Register (PSWP) S T S A T R Control Byte Word Address Data O T P SDA LINE 0 1 1 0 A2A1A0 0 A A A C C C K K K = Don’t Care Reversible Software Write Protection (RSWP): The Reversible Software Write Protection is enabled by sending a command to the device, similar to a normal write command, which programs the Reversible Write Protect Register. This must be done with the WP pin low. The Reversible Write Protect Register is programmed by sending a write command ‘01100010’(62h) with pins A and A tied to ground or not connected and the A 2 1 0 pin connected to V (see Figure 11-2 and Table 11-1 on page 16). The Reversible Write Protection Register or HV Write Protection can be reversed by sending a command ‘01100110’(66h) with the A pin tied to ground or no 2 connect, the A pin tied to V and the A pin tied to V (see Figure 11-3 on page 16 and Table 11-1 on page 1 CC 0 HV 16). Due to the unavailability of the A , A , and A pins, the Reversible Software Write Protection function is not 2 1 0 available on the SOT23 package. Figure 11-2. Setting Reversible Write Protect Register (RSWP) S T S A T R Control Byte Word Address Data O T P SDA LINE 0 1 1 0 0 0 1 0 A A A C C C K K K = Don’t Care AT24MAC402/602 [DATASHEET] 15 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Figure 11-3. Clearing Reversible Write Protect Register (RSWP) S T S A T R Control Byte Word Address Data O T P SDA LINE 0 1 1 0 0 1 1 0 A A A C C C K K K = Don’t Care Table 11-1. V HV Min Max Units V 7 10 V HV Note: V – V > 4.8V HV CC Hardware Write Protection: The WP pin can be connected to V , GND, or left floating. Connecting the WP CC pin to V will write protect the entire array regardless of whether or not the Software Write Protection has been CC enabled or invoked (see Table 11-3 on page 17 and Table 11-4 on page 18). The Software Write Protection Register cannot be programmed when the WP pin is connected to V . If the WP pin is connected to GND or left CC floating, the write protection mode is determined by the status of the Software Write Protect Register. Table 11-2. Write Protection Pin Preamble R/W Command A A A Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 2 1 0 Set PSWP A A A 0 1 1 0 A A A 0 2 1 0 2 1 0 Set RSWP 0 0 V 0 1 1 0 0 0 1 0 HV Clear RSWP 0 V V 0 1 1 0 0 1 1 0 CC HV 16 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Table 11-3. WP Connected to GND or Floating WP Connected to GND or Floating Permanent Reversible Write Protect Write Protect Response R/W Register Register from Command Bit PSWP RSWP Device Action from Device 1010 R X X ACK Read Array. 1010 W Programmed X ACK Can write to second-half (80h - FFh) only. 1010 W X Programmed ACK Can write to second-half (80h - FFh) only. 1010 W Not Programmed Not Programmed ACK Can write to full array. STOP – Indicates Permanent Write Protect Read PSWP R Programmed X No ACK Register is programmed. Data read out is undefined. Indicates PSWP Read PSWP R Not Programmed X ACK Register is not programmed. STOP – Indicates Permanent Write Protect Set PSWP W Programmed X No ACK Register is programmed. Program Permanent Write Protect Register Set PSWP W Not Programmed X ACK (irreversible). STOP – Indicates Reversible Write Protect Read RSWP R X Programmed No ACK Register is programmed. Data read out is undefined. Indicates RSWP Read RSWP R X Not Programmed ACK Register is not programmed. STOP – Indicates Reversible Write Protect Set RSWP W X Programmed No ACK Register is programmed. Program Reversible Write Protect Register Set RSWP W X Not Programmed ACK (reversible). STOP – Indicates Permanent Write Protect Clear RSWP W Programmed X No ACK Register is programmed. Clear (unprogram) Reversible Write Protect Clear RSWP W Not Programmed X ACK Register (reversible). AT24MAC402/602 [DATASHEET] 17 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Table 11-4. WP Connected to V CC WP Connected to V CC Permanent Reversible Write Protect Write Protect Response R/W Register Register from Command Bit PSWP RSWP Device Action from Device 1010 R X X ACK Read array. 1010 W X X ACK Device is write protected. STOP – Indicates pErmanent Write Protect Read PSWP R Programmed X No ACK Register is programmed. Data read out is undefined. Indicates PSWP Read PSWP R Not Programmed X ACK Register is not programmed. STOP – Indicates Permanent Write Protect Set PSWP W Programmed X No ACK Register is programmed. Set PSWP W Not Programmed X ACK Cannot program write protect registers. STOP – Indicates Reversible Write Protect Read RSWP R X Programmed No ACK Register is programmed. Data read out is undefined. Indicates RSWP Read RSWP R X Not Programmed ACK Register is not programmed. STOP – Indicates Reversible Write Protect Set RSWP W X Programmed No ACK Register is programmed. Set RSWP W X Not Programmed ACK Cannot program write protect registers. STOP – Indicates Permanent Write Protect Clear RSWP W Programmed X No ACK Register is programmed. Clear RSWP W Not Programmed X ACK Cannot write to Write Protect Registers. 18 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

12. Read Operations Read operations are initiated the same way as write operations with the exception that the read/write select bit in the device address word is set to one. There are three types of read operations:  Current Address Read  Random Address Read  Sequential Read Current Address Read: The internal data word address counter maintains the last address accessed during the last read or write operation, incremented by one. This address stays valid between operations as long as V to the chip is maintained. The address roll-over during read is from the last byte of the last memory page to CC the first byte of the first page. Once the device address with the read/write select bit set to one is clocked in and acknowledged by the EEPROM, the current address data word is serially clocked out. To end the command, the microcontroller does not respond with a zero but does generate a Stop condition in the subsequent clock cycle. Figure 12-1. Current Address Read S T R S A E T R Device A O T Address D Data P SDA LINE M L R A N S S / C O B BW K A C K Random Read: A Random Read requires a dummy byte write sequence to load in the data word address. Once the device address word and data word address are clocked in and acknowledged by the EEPROM, the microcontroller must generate another Start condition. The microcontroller now initiates a current address read by sending a device address with the read/write select bit high. The EEPROM acknowledges the device address and serially clocks out the data word. To end the random read sequence, the microcontroller does not respond with a zero but does generate a Stop condition in the subsequent clock cycle. Figure 12-2. Random Read S W S T R T R S A I A E T R Device T Word R Device A O T Address E Address (n) T Address D Data (n) P SDA LINE M R A A A N S / C C C O B W K K K A C Dummy Write K AT24MAC402/602 [DATASHEET] 19 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Sequential Read: Sequential reads are initiated by either a current address read or a random address read. After the microcontroller receives a data word, it responds with an acknowledge. As long as the Serial EEPROM receives an acknowledge, it will continue to increment the data word address and serially clock out sequential data words. When the memory address limit is reached, the data word address will “roll over” and the sequential read will continue. The sequential read operation is terminated when the microcontroller does not respond with a zero but does generate a following Stop condition in the subsequent clock cycle. Figure 12-3. Sequential Read R S E T Device A O Address D Data (n) Data (n + 1) Data (n + 2) Data (n + x) P SDA LINE R A A A A N / C C C C O WK K K K A C K Serial Number Read: Reading the serial number is similar to the sequential read sequence but requires use of a different device address value as shown in Figure 12-4, followed by a dummy write, and the use of a specific word address. Note: The entire 128-bit value must be read from the starting address of the serial number block to guarantee a unique number. Since the address pointer of the device is shared between the regular EEPROM array and the serial number block, a dummy write sequence, as part of a Random Read or Sequential Read protocol, should be performed to ensure the address pointer is set to zero. A Current Address Read of the serial number block is supported but if the previous operation was to the EEPROM array, the address pointer will retain the last location accessed, incremented by one. Reading the serial number from a location other than the first address of the block will not result in a unique serial number. Additionally, the most-significant four bits of the word address must be ‘1000’(8h). Thus, if the application desires to read the pre-programmed serial number, then the corresponding word address input would be 80h. If a word address other than 80h is used, then the device will output undefined data. Figure 12-4. Serial Number Read S W S T R T R A I A E R Device T Word R Device A T Address E Address (n) T Address D SDA LINE 1 0 1 1 1 0 0 0 0 0 0 0 1 0 1 1 M R A A A Serial Number A S / C C C Data Byte 0h C B W K K K K Dummy Write S T O P Serial Number Serial Number Serial Number Serial Number N Data Byte 1h Data Byte 2h Data Byte 3h Data Byte Fh O A C K 20 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

EUI Address Read: Reading the EUI address is very similar to the Serial Number read sequence with the exceptions of the starting word address and the amount of data bytes clocked out (see Figure 12-5 on page 21). The EUI read sequence requires use of the device address values as shown in Table 10-1 on page 14, followed by a dummy write, and the use of a specific word address from Figure 7-1 on page 9 for EUI-48 standard or Figure 7-2 on page 9 for EUI-64 standard. Note: The entire six byte (EUI-48) or eight byte (EUI-64) values must be read from the respective starting address of either 9Ah (for EUI-48) or 98h (for EUI-64) to guarantee a unique EUI data value. Since the address pointer of the device is shared between the regular EEPROM array, the serial number block, and the EUI block, a dummy write sequence should be performed to ensure the address pointer is set to the correct starting EUI-48 or EUI-64 address. Random reads of the EUI block are supported, but if the previous operation was to the EEPROM array or to the serial number block, the address pointer will retain the last location accessed, incremented by one. Reading the EUI data from a location other than the correct starting EUI address of the block will not result in a unique EUI data value. Additionally, the most-significant four bits of the word address must be ‘1001’(9h). Therefore, if the application desires to read the pre-programmed EUI value, then the corresponding word address input would be 9Ah in the AT24MAC402 and 98h for the AT24MAC602. If a word address other than 9Ah or 98h respectively is used, the device will output undefined data. Once the EUI block of six or eight bytes of data have been clocked out of the device, the EUI read operation will end when the microcontroller does not respond with a zero or acknowledge, but then creates a Stop condition. It is important to note that the data word address will not roll-over back to the beginning of the respective EUI starting address. If the read operation continues past the last EUI data value, the data word address will roll-over back to the beginning of the extended memory block where the 128-bit serial number will begin to read out. Therefore, every EUI read sequence attempt requires a valid starting address in the dummy write sequence as shown in Figure 12-5. Figure 12-5. EUI Address Read S W S T R T R A I A E R Device T Word R Device A T Address E Address (n) T Address D SDA LINE 1 0 1 1 1 0 0 1 * * * * 1 0 1 1 M R A A A EUI Address A S / C C C Data Byte (n) C B W K K K K Dummy Write S T O P N EUI Address A EUI Address A EUI Address EUI Address O Data Byte (n + 1) C Data Byte (n + 2) C Data Byte (n + 3) Data Byte (n + x) K K A C K * = 1010 (Ah) for 48-Bit EUI and 1000 (8h) for 64-Bit EUI. AT24MAC402/602 [DATASHEET] 21 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

Checking the Permanent Write Protect Register (PSWP) Status: Determining the status of the Permanent Write Protect Register can be accomplished by sending a similar command to the device as was used when programming the register, except the R/W bit must be set to one. If the device responds with an acknowledge, the Permanent Write Protect Register has not been programmed; otherwise, it has been programmed and the first-half of the array is permanently write protected. Checking the Reversible Write Protect Register (RSWP) Status: Determining the status of the Reversible Write Protect Register can be accomplished by sending a similar command to the device as was used when programming the register, except the R/W bit must be set to one. If the device returns an acknowledge, the Reversible Write Protect Register has not been programmed; otherwise, it has been programmed and the first-half of the array is write protected, but remains reversible. Table 12-1. PSWP and RSWP Status Pin Preamble R/W Command A A A Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 2 1 0 Read PSWP A A A 0 1 1 0 A A A 1 2 1 0 2 1 0 Read RSWP 0 0 A 0 1 1 0 0 0 1 1 0 22 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

13. Ordering Information 13.1 Ordering Code Detail A T 2 4 M A C 4 0 2 - S S H M - B Atmel Designator Shipping Carrier Option B = Bulk (Tubes) T = Tape and Reel, Standard Quantity Option E = Tape and Reel, Expanded Quantity Option Product Family Operating Voltage 24MAC = I2C-compatible Serial EEPROM with EUI Address Feature M = 1.7V to 5.5V with 128-bit Serial Number Feature Package Device Grade or Wafer/Die Thickness EUI Option H = Green, NiPdAu Lead Finish, Industrial Temperature Range, 4 = EUI-48 Standard (-40°C to +85°C) 6 = EUI-64 Standard U = Green, Matte Sn Lead Finish, Industrial Temperature Range, (-40°C to +85°C) 11 = 11 mil Wafer Thickness Device Density Package Option 02 = 2-Kbit Density SS = JEDEC SOIC X = TSSOP MA = UDFN ST = SOT23 WWU = Wafer Unsawn AT24MAC402/602 [DATASHEET] 23 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

13.2 AT24MAC402/602 Ordering Codes Programming of IEEE assigned customer OUIs (non-Atmel OUIs) in conjunction with specific blocks of EUI-48 (AT24MAC402) or EUI-64 (AT24MAC602) values is available. Contact Atmel for more details. Additional package types that are not listed may be available. Contact Atmel for more details. Delivery Information Operation Atmel Ordering Codes Finish Package Form Quantity Range AT24MAC402-SSHM-B Bulk (Tubes) 100 per Tube 8S1 AT24MAC402-SSHM-T Tape and Reel 4,000 per Reel AT24MAC402-XHM-B Bulk (Tubes) 100 per Tube NiPdAu 8X (Lead-free/Halogen-free) AT24MAC402-XHM-T Tape and Reel 5,000 per Reel Industrial Temperature AT24MAC402-MAHM-T Tape and Reel 5,000 per Reel (-40°C to 85°C) 8MA2 AT24MAC402-MAHM-E Tape and Reel 15,000 per Reel Matte Tin AT24MAC402-STUM-T 5TS1 Tape and Reel 5,000 per Reel (Lead-free/Halogen-free) AT24MAC402-WWU11M(1) N/A Wafer Sale Note 1 AT24MAC602-SSHM-B Bulk (Tubes) 100 per Tube 8S1 AT24MAC602-SSHM-T Tape and Reel 4,000 per Reel AT24MAC602-XHM-B Bulk (Tubes) 100 per Tube NiPdAu 8X (Lead-free/Halogen-free) AT24MAC602-XHM-T Tape and Reel 5,000 per Reel Industrial Temperature AT24MAC602-MAHM-T Tape and Reel 5,000 per Reel (-40°C to 85°C) 8MA2 AT24MAC602-MAHM-E Tape and Reel 15,000 per Reel Matte Tin AT24MAC602-STUM-T 5TS1 Tape and Reel 5,000 per Reel (Lead-free/Halogen-free) AT24MAC602-WWU11M(1) N/A Wafer Sale Note 1 Note: 1. For wafer sales, please contact Atmel Sales. Package Type 8S1 8-lead, 0.150" wide, Plastic Gull Wing Small Outline (JEDEC SOIC) 8X 8-lead, 0.170" wide, Thin Shrink Small Outline Package (TSSOP) 8MA2 8-pad, 2.00mm x 3.00mm body, 0.50mm pitch, Ultra Thin Dual No Lead (UDFN) 5TS1 5-lead, 2.90mm x 1.60mm body, Plastic Thin Shrink Small Outline (SOT23) 24 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

14. Part Markings AT24MAC402 and AT24MAC602: Package Marking Information 8-lead SOIC 8-lead TSSOP ATMLHYWW ATHYWW ## M @ ## M @ AAAAAAAA AAAAAAA 8-lead UDFN 5-lead SOT-23 2.0 x 3.0 mm Body ## ## MU Top Mark HM@ YXX YMXX Bottom Mark Note 1: designates pin 1 Note 2: Package drawings are not to scale Catalog Number Truncation AT24MAC402 Truncation Code ##: P4 AT24MAC602 Truncation Code ##: P6 Date Codes Voltages Y = Year M = Month WW = Work Week of Assembly M: 1.7V min 2: 2012 6: 2016 A: January 02: Week 2 3: 2013 7: 2017 B: February 04: Week 4 4: 2014 8: 2018 ... ... 5: 2015 9: 2019 L: December 52: Week 52 Country of Assembly Lot Number G rade/Lead Finish Material @ = Country of Assembly AAA...A = Atmel Wafer Lot Number H: Industrial/NiPdAu U: Industrial/Matte Tin Trace Code Atmel Truncation XX = Trace Code (Atmel Lot Numbers Correspond to Code) AT: Atmel Example: AA, AB.... YZ, ZZ ATM: Atmel ATML: Atmel 4/3/12 TITLE DRAWING NO. REV. 24MAC402-602SM, AT24MAC402 and AT24MAC602 Package Mark Contact: 24MAC402-602CSM C Package Marking Information DL-CSO-Assy_eng@atmel.com AT24MAC402/602 [DATASHEET] 25 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

15. Packaging Information 15.1 8S1 — 8-lead JEDEC SOIC C 1 E E1 L N Ø TOP VIEW END VIEW e b A COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL MIN NOM MAX NOTE A1 A 1.35 – 1.75 A1 0.10 – 0.25 b 0.31 – 0.51 C 0.17 – 0.25 D 4.80 – 5.05 D E1 3.81 – 3.99 E 5.79 – 6.20 SIDE VIEW e 1.27 BSC Notes: This drawing is for general information only. L 0.40 – 1.27 Refer to JEDEC Drawing MS-012, Variation AA ØØ 0° – 8° for proper dimensions, tolerances, datums, etc. 6/22/11 TITLE GPC DRAWING NO. REV. 8S1, 8-lead (0.150” Wide Body), Plastic Gull Wing SWB 8S1 G Package Drawing Contact: Small Outline (JEDEC SOIC) packagedrawings@atmel.com 26 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

15.2 8X — 8-lead TSSOP C 1 Pin 1 indicator this corner E1 E L1 N L Top View End View A b A1 COMMON DIMENSIONS e A2 (Unit of Measure = mm) D SYMBOL MIN NOM MAX NOTE Side View A - - 1.20 A1 0.05 - 0.15 Notes: 1. This drawing is for general information only. A2 0.80 1.00 1.05 Refer to JEDEC Drawing MO-153, Variation AA, for proper dimensions, tolerances, datums, etc. D 2.90 3.00 3.10 2, 5 2. Dimension D does not include mold Flash, protrusions or gate E 6.40 BSC burrs. Mold Flash, protrusions and gate burrs shall not exceed 0.15mm (0.006in) per side. E1 4.30 4.40 4.50 3, 5 3. Dimension E1 does not include inter-lead Flash or protrusions. Inter-lead Flash and protrusions shall not exceed 0.25mm b 0.19 0.25 0.30 4 (0.010in) per side. e 0.65 BSC 4. Dimension b does not include Dambar protrusion. Allowable Dambar protrusion shall be 0.08mm total in excess L 0.45 0.60 0.75 of the b dimension at maximum material condition. Dambar L1 1.00 REF cannot be located on the lower radius of the foot. Minimum space between protrusion and adjacent lead is 0.07mm. C 0.09 - 0.20 5. Dimension D and E1 to be determined at Datum Plane H. 2/27/14 TITLE GPC DRAWING NO. REV. 8X, 8-lead 4.4mm Body, Plastic Thin Package Drawing Contact: Shrink Small Outline Package (TSSOP) TNR 8X E packagedrawings@atmel.com AT24MAC402/602 [DATASHEET] 27 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

15.3 8MA2 — 8-pad UDFN E 1 8 Pin 1 ID 2 7 D 3 6 4 5 TOP VIEW C SIDE VIEW A2 A A1 E2 b (8x) 8 1 COMMON DIMENSIONS 7 2 Pin#1 ID (Unit of Measure = mm) D2 6 3 SYMBOL MIN NOM MAX NOTE A 0.50 0.55 0.60 5 4 A1 0.0 0.02 0.05 e (6x) A2 - - 0.55 L (8x) K D 1.90 2.00 2.10 BOTTOM VIEW D2 1.40 1.50 1.60 Notes: 1. This drawing is for general information only. Refer to E 2.90 3.00 3.10 Drawing MO-229, for proper dimensions, tolerances, E2 1.20 1.30 1.40 datums, etc. 2. The Pin #1 ID is a laser-marked feature on Top View. b 0.18 0.25 0.30 3 3. Dimensions b applies to metallized terminal and is C 1.52 REF measured between 0.15 mm and 0.30 mm from the terminal tip. If the terminal has the optional radius on L 0.30 0.35 0.40 the other end of the terminal, the dimension should e 0.50 BSC not be measured in that radius area. 4. The Pin #1 ID on the Bottom View is an orientation K 0.20 - - feature on the thermal pad. 11/26/14 TITLE GPC DRAWING NO. REV. 8MA2, 8-pad 2 x 3 x 0.6mm Body, Thermally Package Drawing Contact: Enhanced Plastic Ultra Thin Dual Flat No-Lead YNZ 8MA2 G packagedrawings@atmel.com Package (UDFN) 28 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

15.4 5TS1 — 5-lead SOT23 e1 5 4 C E1 E CL L1 1 2 3 TOP VIEW END VIEW b A2 A SEATING PLANE e A1 D SIDE VIEW COMMON DIMENSIONS (Unit of Measure = mm) 1. Dimension D does not include mold flash, protrusions or gate burrs. Mold flash, protrusions or gate burrs shall not exceed 0.15 mm per end. Dimension E1 does SYMBOL MIN NOM MAX NOTE not include interlead flash or protrusion. Interlead flash or protrusion shall not A - - 1.00 exceed 0.15 mm per side. 2. The package top may be smaller than the package bottom. Dimensions D and E1 A1 0.00 - 0.10 are determined at the outermost extremes of the plastic body exclusive of mold A2 0.70 0.90 1.00 flash, tie bar burrs, gate burrs and interlead flash, but including any mismatch between the top and bottom of the plastic body. c 0.08 - 0.20 3 3. These dimensions apply to the flat section of the lead between 0.08 mm and 0.15 D 2.90 BSC 1,2 mm from the lead tip. 4. Dimension "b" does not include dambar protrusion. Allowable dambar protrusion E 2.80 BSC 1,2 shall be 0.08 mm total in excess of the "b" dimension at maximum material condition. The dambar cannot be located on the lower radius of the foot. Minimum E1 1.60 BSC 1,2 space between protrusion and an adjacent lead shall not be less than 0.07 mm. L1 0.60 REF e 0.95 BSC e1 1.90 BSC This drawing is for general information only. Refer to JEDEC b 0.30 - 0.50 3,4 Drawing MO-193, Variation AB for additional information. 5/31/12 TITLE GPC DRAWING NO. REV. 5TS1, 5-lead 1.60mm Body, Plastic Thin Package Drawing Contact: Shrink Small Outline Package (Shrink SOT) TSZ 5TS1 D packagedrawings@atmel.com AT24MAC402/602 [DATASHEET] 29 Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

16. Revision History Doc. Rev. Date Description Add the UDFN Expanded Quantity Option and the ordering information section and 8808E 01/2015 reorganize sections. Update the 8MA2 package outline drawing. Add bulk SOIC and TSSOP ordering codes. Update ordering code table, 8X and 8MA2 package drawings, and the disclaimer page. 8808D 08/2014 Correct pinouts from bottom to top view and reorganization figures. No changes to functional specification. Update status from preliminary to release. 8807C 07/2013 Update footers and disclaimer page. 8807B 09/2012 Update ordering information. 8807A 06/2012 Initial document release. 30 AT24MAC402/602 [DATASHEET] Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015

X X X X X X Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441.0311 F: (+1)(408) 436.4200 | www.atmel.com © 2015 Atmel Corporation. / Rev.: Atmel-8807E-SEEPROM-AT24MAC402-602-Datasheet_012015. Atmel®, Atmel logo and combinations thereof, Enabling Unlimited Possibilities®,and others are registered trademarks or trademarks of Atmel Corporation in U.S. and other countries. Other terms and product names may be trademarks of others. DISCLAIMER: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and will not be used in connection with any applications where the failure of such products would reasonably be expected to result in significant personal injury or death (“Safety-Critical Applications”) without an Atmel officer's specific written consent. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the operation of nuclear facilities and weapons systems. Atmel products are not designed nor intended for use in military or aerospace applications or environments unless specifically designated by Atmel as military-grade. Atmel products are not designed nor intended for use in automotive applications unless specifically designated by Atmel as automotive-grade.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrochip: AT24MAC402-SSHM-T AT24MAC402-XHM-T AT24MAC602-SSHM-T AT24MAC602-XHM-T AT24MAC402-STUM- T AT24MAC402-MAHM-T AT24MAC602-MAHM-T AT24MAC602-STUM-T AT24MAC402-SSHM-B AT24MAC602- XHM-B AT24MAC402-XHM-B AT24MAC602-SSHM-B AT24MAC402-MAHM-E AT24MAC602-MAHM-E