SMD Multilayer Chip Power Inductor ASMPH-0805 Pb RoHS/RoHS II Compliant 2.0 x 1.25 x 0.9mm FEATURES: APPLICATIONS: • High DC bias current due to trench technology ASMPH family is a miniature type of multilayer power • Much lower profile than any other series inductors constructed using low loss ferite material to • Monolithic structure for high reliability support high-speed switching frequencies.The compact • Excellent solderability and heat resistance size and high efficiency is ideal for DC/DC converter • Magnetically shielded structure to eliminate cross coupling applications in space limited boards. Switching mode regulators for smart phones and cameras. Buck convertersfor RFIC, RFPA and Audio Codec modules. Boost converters for flash drivers. Wireless cards, DVD players and other electronic devices. ELECTRICAL SPECIFICATIONS: Operating Temperature: -40˚C to +85˚C Storage Temperature: -10˚C to +40˚C, RH 70% (Max .) Part Number Temperature Saturation ASMPH-0805- Inductance Tolerance DCR SRF Min. Rise Current Current Inductance Code (max) (Typ) Units μH % Ω ± 25% MHz mA mA M=±20% Symbol L DCR SRF I I N=±30% rms sat ASMPH-0805-R47 0.47 M, N 0.08 100 1500 1200 ASMPH-0805-1R0 1.0 M, N 0.11 60 1300 1150 ASMPH-0805-1R5 1.5 M, N 0.16 50 1100 800 ASMPH-0805-2R2 2.2 M, N 0.20 40 900 500 ASMPH-0805-3R3 3.3 M, N 0.20 30 900 350 ASMPH-0805-4R7 4.7 M, N 0.25 30 800 280 Unless otherwise specified, the standard atmospheric conditions for measurement/test as: a. Ambient Temperature: 20±15˚C b. Relative Humidity: 65±20% c. Air Pressure: 86 kPa to 106 kPa Inductance (L): HP4291B+HP16192A or Equivalent, tested at 1MHz, -20dBm or 50mV. Direct Current Resistance (DCR): Milliohmeter-HP4338B or Equivalent Self-Resonant Frequency (SRF): HP4291B+HP16192A or Equivalent, -20dBm or 50mV. Temperature Rise current (Irms): Electric Power, Electric current meter, Thermometer. Irms is the value of DC current as chip surface temperature rose just 40°C against chip initial surface temperature. Saturation Current (Isat): HP6632B system DC power supply, HP4291B+HP16192A+HP16200A or equivalent. Isat is the value of DC current as inductance decreased just 30% against initial value AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.12.13 ISOI S9O00 910 /0 Q1:S20 900800 30332 Esperanza, Rancho Santa Margarita, Californi a 9268 CCEERRTTIIFFIIEEDD tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

SMD Multilayer Chip Power Inductor ASMPH-0805 Pb RoHS/RoHS II Compliant 2.0 x 1.25 x 0.9mm PART IDENTIFICATIONS: ASMPH-0805- - Inductance Code Tolerance Packaging Please refer to the M=±20% T: Tape and Reel (3kpcs / reel) table above N=±30% OUTLINE DRAWING: Recommended Land Pattern A B C L W T a 0.8~1.2 0.8~1.2 0.9~1.6 2.0 (+0.3, -0.1) 1.25±0.2 0.9±0.1 0.5±0.3 Dimension: mm MATERIALS: Side View Top View Part Name Material 1 Base Material Ferrite 2 Internal Conductor Ag 1 2 3 4 3 Pull out Electrode Ag Ag (Inner layer) 4 Terminal Electrode Ni-Sn (Outer layer) AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.12.13 ISOI S9O00 910 /0 Q1:S20 900800 30332 Esperanza, Rancho Santa Margarita, Californi a 9268 CCEERRTTIIFFIIEEDD tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

SMD Multilayer Chip Power Inductor ASMPH-0805 Pb RoHS/RoHS II Compliant 2.0 x 1.25 x 0.9mm REFLOW PROFILE: Preheat Condition 150 to 200 ˚C; 60 to 120 sec. Allowed time above 217 ˚C 60 to 90 sec. Max temperature 260 ˚C Max time at max temperature 10 sec. Solder paste Sn/3.0Ag/0.5Cu Allowed Reflow time 2x max. TAPE & REEL: Packing T: 3,000pcs / reel A B P K max T max 1.55±0.1 2.30±0.1 4.0±0.1 1.45 0.3 4.3±0.2mm 8.4+1.5/-0.0mm 2.45±0.2mm 4.0±0.1mm 5.0±0.1mm 58±2.0mm 13.5±0.2mm 3.0±0.1mm max＜14.4mm 178±2.0mm Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.12.13 ISOI S9O00 910 /0 Q1:S20 900800 30332 Esperanza, Rancho Santa Margarita, Californi a 9268 CCEERRTTIIFFIIEEDD tel 949-546-8000 | fax 949-546-8001 | www.abracon.com