DATA SHEET AS211-334: 0.1 to 4.0 GHz pHEMT SPDT Switch Applications  General purpose switch for telecommunications Features J3 V2  P1dB: +30 dBm typical @ 3 V  IP3: +43 dBm typical @ 3 V J1  Low insertion loss: 0.3 dB @ 0.9 GHz  Low DC power consumption J2 V1  Small footprint, DFN (6-pin, 1.2 x 1.5 x 0.75 mm) package (MSL1, 260 C per JEDEC J-STD-020) S1614 Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. Figure 1. AS211-334 Block Diagram For additional information, refer to Skyworks Definition of Green™, document number Description SQ04-0074. The AS211-334 is an FET single-pole, double-throw (SPDT) switch for general telecommunications applications. The device features low insertion loss and positive voltage operation with very low DC power consumption. The switch is manufactured in a compact, 1.2 x 1.5 x 0.75 mm, 6-pin Dual Flat No Lead (DFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package J3 1 6 V2 are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. GND 2 5 J1 J2 3 4 V1 Figure 2. AS211-334 Pinout – 6-Pin DFN (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200191G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 20, 2014 1

DATA SHEET • AS211-334: SPDT SWITCH Table 1. AS211-334 Signal Descriptions Pin Name Description Pin Name Description 1 J3 RF output 4 V1 Positive control voltage 2 GND Ground 5 J1 RF common/antenna port 3 J2 RF output 6 V2 Positive control voltage Table 2. AS211-334 Absolute Maximum Ratings Parameter Symbol Test Condition Minimum Typical Maximum Units Input power PIN Any frequency >500 MHz, 6 W VCTL = 0/7 V Control voltage VCTL –0.2 +8.0 V Operating temperature TOP –40 +85 C Storage temperature TSTG –65 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Electrical and Mechanical Specifications The state of the AS211-334 is determined by the logic provided in Table 4. The absolute maximum ratings of the AS211-334 are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics of the AS211-334 are illustrated in Figures 3 through 5. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 June 20, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200191G

DATA SHEET • AS211-334: SPDT SWITCH Table 3. AS211-334 Electrical Specifications (Note 1) (Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss IL 0.1 to 1.0 GHz 0.3 0.5 dB 1.0 to 2.0 GHz 0.4 0.6 dB 2.0 to 3.0 GHz 0.5 0.7 dB 3.0 to 4.0 GHz 0.6 0.8 dB Isolation ISO 0.1 to 1.0 GHz 22 25 dB 1.0 to 2.0 GHz 20 22 dB 2.0 to 3.0 GHz 20 23 dB 3.0 to 4.0 GHz 23 26 dB Voltage Standing Wave Ratio VSWR Low frequency to 4 GHz 1.2:1 1.3:1 – Switching characteristics: Rise, fall 10/90% or 90/10% RF 10 ns On, off 50% control to 90/10% RF 20 ns Video feedthrough TRISE = 1 ns, bandwidth = 500 MHz 25 mV 1 dB input compression point IP1dB VCTL = 0 and 3 V, 0.5 to 3.0 GHz +30 dBm VCTL = 0 and 5 V 0.5 to 3.0 GHz +34 dBm 3rd Order Input Intercept Point IIP3 Two-tone PIN = +5 dBm VCTL = 0 and 3 V +43 dBm VCTL = 0 and 5 V +50 dBm Thermal resistance ΘJC 25 °C/W Control voltage: Low VCTL_L VCTL_L = 0 to 0.2 V @ 20 μA max. High VCTL_H VCTL_H = 3 V @ 100 μA max. to 5 V @ 200 μA max. Note 1: Performance is guaranteed only under the conditions listed in this table. Typical Performance Characteristics (VCTL = 3 V, CBL = 47 pF, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) 0 0 –0.1 –5 –0.2 –10 –0.3 oss (dB) ––00..54 on (dB) –15 on L –0.6 olati –20 erti –0.7 Is –25 s n I –0.8 –30 –0.9 –1.0 –35 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) Figure 3. Insertion Loss vs Frequency Figure 4. Isolation vs Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200191G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 20, 2014 3

DATA SHEET • AS211-334: SPDT SWITCH 2.0 1.9 1.8 1.7 1.6 R W 1.5 S V 1.4 1.3 1.2 1.1 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Figure 5. VSWR vs Frequency Table 4. AS211-334 Truth Table V1 (Pin 4) V2 (Pin 6) J1 to J2 Path J1 to J3 Path 0 VHIGH Insertion loss Isolation VHIGH 0 Isolation Insertion loss Note: VHIGH = +3 V to +5 V. “0” = 0 V to +0.2 V. Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device. Evaluation Board Description Package and Handling Information The AS211-334 Evaluation Board is used to test the performance Instructions on the shipping container label regarding exposure to of the AS211-334 SPDT Switch. An assembly drawing for the moisture after the container seal is broken must be followed. Evaluation Board is shown in Figure 6. The Evaluation Board Otherwise, problems related to moisture absorption may occur schematic diagram is provided in Figure 7. when the part is subjected to high temperature during solder assembly. The AS211-334 is rated to Moisture Sensitivity Level 1 (MSL1) at Package Dimensions 260 C. It can be used for lead or lead-free soldering. The PCB layout footprint for the AS211-334 is provided in Care must be taken when attaching this product, whether it is Figure 8. Typical case markings are shown in Figure 9. Package done manually or in a production solder reflow environment. dimensions for the 6-pin DFN are shown in Figure 10, and tape Production quantities of this product are shipped in a standard and reel dimensions are provided in Figure 11. tape and reel format. For packaging details, refer to the Skyworks Application Note, Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation, document number 200083. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 June 20, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200191G

DATA SHEET • AS211-334: SPDT SWITCH 0 0 0 0 0 0 0 5 0 0. 0. 1. 0.125 THRU V2 J3 * J1 * * J2 V1 SK39653 2.000 Dimensions are in millimeters S1837 Figure 6. AS211-334 Evaluation Board Assembly Diagram C RF Output BL 1 J3 V2 6 Positive Control Voltage C BL 2 GND J1 5 RF Common/Antenna Port C RF Output BL 3 J2 V1 4 Positive Control Voltage S1613 Figure 7. AS211-334 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200191G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 20, 2014 5

DATA SHEET • AS211-334: SPDT SWITCH 6X 0.20 Pitch 0.50 Detail A 0.05 Metal Land Pad Solder Mask Opening 0.33 0.23 0.55 0.65 Detail A 6X Scale = 60X S1616 Figure 8. AS211-334 PCB Layout Footprint (Top View) Device Marking Pin 1 Indicator F Figure 9. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 June 20, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200191G

DATA SHEET • AS211-334: SPDT SWITCH C Seating Plane 1.20 A 0.02 +0.03/–0.02 Pin 1 Indicator B C’0.10 Pin 1 Indicator 4 1 0.50 Pitch 1.50 2X 0.05 C 6 3 6X 3 A 0.05 C 2X 0.05 C 0.75 + 0.05/–0.04 0.05 C Top View Side View Bottom View 5 0.10 M C A B 0.2 ± 0.05 0.4 ± 0.075 Detail A Scale: 100X All measurements are in millimeters. 6 Places Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the terminals and all other bottom surface metalization. Dimension applies to metalized terminal. If the terminal has a radius on its end, the width dimension should not be measured in that radius area. S3037 Figure 10. AS211-334 6-Pin DFN Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200191G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 20, 2014 7

DATA SHEET • AS211-334: SPDT SWITCH 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 ø1.50 +0.10 1.75 ± 0.10 0.30 ± 0.05 (T) B 5 0 R0.30 Max 0. 8.0 + 0.30 1.40 ± A A 3.50 ± –0.10 0 .1 0 (B o ) 1.00 ± 0.10 (Ko) B Pin 1 Indicator ø0.76 +0.10 Section B 1.70 ± 0.10 (Ao) Notes: 1. Carrier tape: black conductive polystyrene or polycarbonate. 2. Cover tape: transparent conductive material. R0.30 Max 3. ESD surface resistivity shall meet GP01-D232. 4. Ao and Bo measurement point is 0.30 mm from bottom pocket. Section A 5. 10-sprocket hole pitch cumulative tolerance: ±0.20 mm. Y1045 6. All dimensions are in millimeters. Figure 11. AS211-334 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 June 20, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200191G

DATA SHEET • AS211-334: SPDT SWITCH Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number AS211-334: SPDT Switch AS211-334 AS211-334 EVB Copyright © 2008-2009, 2012, 2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200191G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 20, 2014 9