DATA SHEET AS179-92LF: 20 MHz to 4.0 GHz GaAs SPDT Switch Applications  General purpose medium-power switches in telecommunication J3 V2 applications  Transmit/receive switches in 802.11 b/g WLAN Bluetooth® systems J1 Features  IP1dB = +30 dBm typical @ 3 V J2 V1  IP3 = +43 dBm typical @ 3 V  Low insertion loss, 0.3 dB @ 0.9 GHz 200176H-001  Low DC power consumption Figure 1. AS179-92LF Block Diagram  Ultra-miniature, SC-70 (6-pin, 2.00 x 1.25 mm) package (MSL1, 260 C per JEDEC J-STD-020) Description The AS179-92LF is a pHEMT GaAs FET single-pole, double-throw (SPDT) switch. The device features low insertion loss and positive Skyworks GreenTM products are compliant with voltage operation with very low DC power consumption. The all applicable legislation and are halogen-free. AS179-92LF is manufactured in a compact, low-cost For additional information, refer to Skyworks 2.00 x 1.25 mm, 6-pin SC-70 package. Definition of GreenTM, document number A functional block diagram is shown in Figure 1. The pin SQ04–0074. configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. 2 1 1 V J V 6 5 4 1 2 3 3 D 2 J N J G 200176H-002 Figure 2. AS179-92LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200176H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2016 1

DATA SHEET • AS179-92LF: SPDT SWITCH Table 1. AS179-92LF Signal Descriptions1 Pin Name Description Pin Name Description 1 J3 RF output (Note 1) 4 V1 DC control voltage 2 GND Ground 5 J1 RF output (Note 1) 3 J2 RF output (Note 1) 6 V2 DC control voltage 1 A 100 pF blocking capacitor is required for >500 MHz operation. Use larger value capacitors for lower frequency operation. Electrical and Mechanical Specifications The absolute maximum ratings of the AS179-92LF are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics are shown in Figures 3, 4, and 5. Table 2. AS179-92LF Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units Control voltage VCTL –1.2 +8.0 V RF input power (VCTL = 0 to 7 V): >500 MHz 6 W <500 MHz 500 mW Operating temperature TOP –40 +85 °C Operating temperature (Pinmax < +32 dBm for TOP = 105 °C) TOP –40 +105 °C Storage temperature TSTG –65 +150 °C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. AS179-92LF Electrical Specifications1 (1 of 2) (VCTL = 0 to3 V, TOP = +25 C, Characteristic Impedance = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss2,3 IL 0.02 to 1.0 GHz 0.3 0.4 dB 1.0 to 2.0 GHz 0.4 0.5 dB 2.0 to 3.0 GHz 0.4 0.6 dB 3.0 to 4.0 GHz 0.5 0.7 dB Isolation3 ISO 0.02 to 1.0 GHz 22 25 dB 1.0 to 2.0 GHz 22 25 dB 2.0 to 3.0 GHz 20 23 dB Return loss3,4 RL 0.02 to 1.0 GHz 15 20 dB 1.0 to 2.0 GHz 15 20 dB 2.0 to 3.0 GHz 14 17 dB 3.0 to 4.0 GHz 13 15 dB Switching characteristics: Rise/fall 10/90% or 90/10% RF 10 ns On/off 50% control to 90/10% RF 100 ns Video feedthrough tR = 1 ns, bandwidth = 500 MHz 25 mV Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200176H

DATA SHEET • AS179-92LF SPDT SWITCH Table 3. AS179-92LF Electrical Specifications1 (2 of 2) (VCTL = 0 to 3 V, TOP = +25 C, Characteristic Impedance = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 1 dB input compression point IP1dB @ 0.5 to 3.0 GHz VCTL = 0 to 2 V +26 dBm VCTL = 0 to 3 V +30 dBm VCTL = 0 to 5 V +34 dBm @ 48 MHz VCTL = 0 to 3 V +28.9 dBm VCTL = 0 to 5 V +29.5 dBm @ 3.0 to 4.0 GHz VCTL = 0 to 3 V +29 dBm VCTL = 0 to 5 V +32 dBm Third order intercept point IP3 +5 dBm two-tone input power @ 0.5 to 3.0 GHz VCTL = 0 to 2 V +43 dBm VCTL = 0 to 3 V +43 dBm VCTL = 0 to 5 V +50 dBm +5 dBm two-tone input power @3.0 to 4.0 GHz VCTL = 5 V +45 dBm Thermal resistance 25 °C/W Control voltage: Low (@ 20 μA max) VCTL_L 0 0.2 V High (@100 μA max) VCTL_H 2.0 V High (@ 200 μA max) VCTL_H 5.0 V 1 Performance is guaranteed only under the conditions listed in this table. 2 Insertion loss changes by 0.003 dB/°C. 3 Typical performance maintained with VCTL = 0.2 V. 4 Insertion loss state. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200176H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2015 3

DATA SHEET • AS179-92LF: SPDT SWITCH Typical Performance Characteristics (VCTL = 0 to 3 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [Zo] = 50 Ω, CBL = 100 pF, Unless Otherwise Noted) 0 0 –10 –0.2 B) –20 d B) n Loss ( –0.4 ation (d ––3400 sertio –0.6 Isol –50 In ––01..80 JJ11––JJ23 200176H-003 ––6700 JJ11––JJ32 200176H-004 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) Figure 3. Insertion Loss vs Frequency Figure 4. Isolation vs Frequency 0 –5 J1 |S11| J2 |S22| –10 B) J1 |S11| d –15 J3 |S22| s ( s o –20 L n ur –25 et R –30 ––3450 200176H-005 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Figure 5. Return Loss vs Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200176H

DATA SHEET • AS179-92LF SPDT SWITCH Table 4. Truth Table (VHIGH = 2 to 5 V)1 V1 V2 J1-J2 J1-J3 VHIGH 0 Isolation Insertion loss 0 VHIGH Insertion loss Isolation 1 Any state other than described in this table places the device in an undefined state. An undefined state does not damage the device. Evaluation Board Description Package and Handling Information The AS179-92LF Evaluation Board is used to test the performance Instructions on the shipping container label regarding exposure to of the AS179-92LF SPDT switch. An Evaluation Board schematic moisture after the container seal is broken must be followed. diagram is provided in Figure 6. An assembly drawing for the Otherwise, problems related to moisture absorption may occur Evaluation Board is shown in Figure 7. when the part is subjected to high temperature during solder assembly. The AS179-92LF is rated to Moisture Sensitivity Level 1 (MSL1) at Package Dimensions 260 C. It can be used for lead or lead-free soldering. Package dimensions are shown in Figure 8, and tape and reel Care must be taken when attaching this product, whether it is dimensions are provided in Figure 9. done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200176H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2015 5

DATA SHEET • AS179-92LF: SPDT SWITCH C3 RF Output 1 J3 V2 6 DC Control Voltage C1 2 GND J1 5 RF Output C2 3 J2 V1 4 DC Control RF Output Voltage Note: Use 100 pF blocking capacitors (C1, C2, C3) for >500 MHz operation. Higher values recommended for lower frequency operation. Exposed paddle must be grounded. Use 10 nF blocking capacitors (C1, C2, C3) for <50 MHz operation. 200176H-006 Figure 6. AS179-92LF Evaluation Board Schematic THRU C3 V2 J3 C1 J1 J2 C2 V1 200176H-007 Figure 7. AS179-92LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200176H

DATA SHEET • AS179-92LF SPDT SWITCH 2.00 ± 0.20 0.90 ± 0.10 0.65 mm BSC 0.95 ± 0.15 2.20 ± 0.20 1.25 ± 0.10 0.005 ± 0.005 Pin 1 Indicator 0.23 Ref 0.25 ± 0.15 Notes: 0.14 ± 0.04 0.20 mm ± 0.10 All measurements are in millimeters. Dimensions and tolerances according to ASME Y14.5M-1994. 200176H-008 Figure 8. AS179-92LF Package Dimensions ∅1.50+ 0.10/–0.00 4.00 ± 0.10 4.00 (Note 4) 2.00 ± 0.05 1.75 ± 0.10 1.20 ± 0.10 (Ko) B ± 0.10 (Bo) A A 3.50 ± 0.05 +0.30/–0.10 2.70 8.00 Pin 1 B B 0.30 ± 0.05 ∅1.00 Min R0.30 Typ 2.25 ± 0.10 (Ao) A Notes: 1. Carrier tape: black conductive polystyrene. 2. Cover tape material: transparent conductive HSA. 3. Cover tape size: 5.40 mm width. 4. 10-sprocket hole pitch cumulative tolerance ±0.20 mm. 200176H-009 5. All measurements are in millimeters. Figure 9. AS179-92LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200176H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 25, 2015 7

DATA SHEET • AS179-92LF: SPDT SWITCH Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number AS179-92LF: SPDT Switch AS179-92LF AS179-92LF-EVB Copyright © 2008-2010, 2015-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 January 25, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200176H