APTF1616SEEZGQBDC 1.6 x 1.6 mm Full-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with (cid:122) AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with InGaN (cid:122) on Sapphire Light Emitting Diode The Blue source color devices are made with InGaN (cid:122) Light Emitting Diode Electrostatic discharge and power surge could (cid:122) damage the LEDs It is recommended to use a wrist band or (cid:122) anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be (cid:122) electrically grounded FEATURES 1.6 mm x 1.6 mm SMD LED, 0.7 mm thickness (cid:122) Low power consumption (cid:122) Can produce any color in visible spectrum, including (cid:122) white light Package: 2000 pcs / reel (cid:122) Moisture sensitivity level: 3 (cid:122) RoHS compliant (cid:122) RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) APPLICATIONS Backlight (cid:122) Status indicator (cid:122) Home and smart appliances (cid:122) Wearable and portable devices (cid:122) Healthcare applications (cid:122) ATTENTION Notes: Observe precautions for handling 1. All dimensions are in millimeters (inches). electrostatic discharge sensitive devices 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Iv (mcd) @ 20mA [2] V i e w i n g Angle [1] Emitting Color Part Number Lens Type (Material) Min. Typ. 2θ1/2 ■ Hyper Red 55 110 (AlGaInP) ■ APTF1616SEEZGQBDC Green (InGaN) Water Clear 120 280 130° ■ Blue (InGaN) 40 70 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAJ8681 / 1203013277 Rev No: V.10B Date: 04/11/2019

APTF1616SEEZGQBDC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25°C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 630 Wavelength at Peak Emission IF = 20mA λpeak Green 515 - nm Blue 460 Hyper Red 621 Dominant Wavelength IF = 20mA λdom [1] Green 525 - nm Blue 465 Hyper Red 20 Spectral Bandwidth at 50% Φ REL MAX Δλ Green 35 - nm IF = 20mA Blue 25 Hyper Red 25 Capacitance C Green 45 - pF Blue 100 Hyper Red 2 2.5 Forward Voltage IF = 20mA VF [2] Green 3.3 4.1 V Blue 3.3 4 Hyper Red 10 Reverse Current (VR = 5V) IR Green - 50 µA Blue 50 Hyper Red 0.13 Temperature Coefficient of λ peak TC Green 0.05 - nm/°C IF = 20mA, -10°C ≤ T ≤ 85°C λpeak Blue 0.04 Hyper Red 0.06 Temperature Coefficient of λ dom TC Green 0.03 - nm/°C IF = 20mA, -10°C ≤ T ≤ 85°C λdom Blue 0.03 Hyper Red -2 Temperature Coefficient of VF TC Green -3 - mV/°C IF = 20mA, -10°C ≤ T ≤ 85°C V Blue -3 Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25°C A Value Parameter Symbol Unit Hyper Red Green Blue Power Dissipation P 75 102.5 120 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 °C j Operating Temperature T -40 to +85 °C op Storage Temperature T -40 to +85 °C stg DC Forward Current I 30 25 30 mA F Peak Forward Current IFM [1] 195 150 150 mA Electrostatic Discharge Threshold (HBM) - 3000 450 250 V Thermal Resistance (Junction / Ambient) R [2] 560 690 495 °C/W thJA Thermal Resistance (Junction / Solder point) R [2] 455 590 385 °C/W thJS Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAJ8681 / 1203013277 Rev No: V.10B Date: 04/11/2019

APTF1616SEEZGQBDC TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION Blue Green Red y (a. u.)10800%% Ta = 25 °C Ta = 25 °C-45° -30° -15° 0° 15° 30° 45° RGB sit 60% n e e Int 40% -60° 60° v ati el 20% R -75° 75° 0% 350 400 450 500 550 600 650 700 750 800 -90° 90° Wavelength (nm) 1.0 0.5 0.0 0.5 1.0 HYPER RED Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 at 2.5 A) 50 at 2.5 Forward current (mA) 12340000 Ta = 25 °C ous intensity normalised 20 mA 0112....5050 Ta = 25 °C ssible forward current (m 12340000 ous intensity normalised T = 25 °Ca 0112....5050 0 Lumin 0.0 Permi 0 Lumin 0.0 1.5 1.7 1.9 2.1 2.3 2.5 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) GREEN Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 at 2.5 A) 50 at 2.5 Forward current (mA) 12340000 Ta = 25 °C ous intensity normalised 20 mA 0112....5050 Ta = 25 °C ssible forward current (m 12340000 ous intensity normalised T = 25 °Ca 0112....5050 0 Lumin 0.0 Permi 0 Lumin 0.0 2.0 2.5 3.0 3.5 4.0 4.5 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) BLUE Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 2.5 A) 50 2.5 Forward current (mA) 123400000 Ta = 25 °C Luminous intensity normalisedat 20 mA00112.....05050 Ta = 25 °C Permissible forward current (m 123400000 Luminous intensity normalisedat T = 25 °Ca00112.....05050 2.0 2.4 2.8 3.2 3.6 4.0 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) Page 3 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAJ8681 / 1203013277 Rev No: V.10B Date: 04/11/2019

APTF1616SEEZGQBDC REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes Page 4 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAJ8681 / 1203013277 Rev No: V.10B Date: 04/11/2019