APHHS1005SURCK 1.0 x 0.5 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with (cid:122) AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could (cid:122) damage the LEDs It is recommended to use a wrist band or (cid:122) anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be (cid:122) electrically grounded FEATURES 1.0 mm x 0.5 mm SMD LED, 0.5 mm thickness (cid:122) Low power consumption (cid:122) Ideal for backlight and indicator (cid:122) Package: 2000 pcs / reel (cid:122) (cid:122) Moisture sensitivity level: 3 RoHS compliant (cid:122) APPLICATIONS Backlight (cid:122) Status indicator (cid:122) (cid:122) Home and smart appliances RECOMMENDED SOLDERING PATTERN Wearable and portable devices (units : mm; tolerance : ± 0.1) (cid:122) Healthcare applications (cid:122) ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Iv (mcd) @ 20mA [2] V i e w i n g Angle [1] Emitting Color Part Number Lens Type (Material) Min. Typ. 2θ1/2 120 220 APHHS1005SURCK ■ Hyper Red (AlGaInP) Water Clear 120° *40 *70 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAD0911 / 1203001434 Rev No: V.16A Date: 04/08/2019

APHHS1005SURCK ELECTRICAL / OPTICAL CHARACTERISTICS at T =25°C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Hyper Red 645 - nm Dominant Wavelength IF = 20mA λdom [1] Hyper Red 630 - nm Spectral Bandwidth at 50% Φ REL MAX Δλ Hyper Red 28 - nm IF = 20mA Capacitance C Hyper Red 35 - pF Forward Voltage IF = 20mA VF [2] Hyper Red 1.95 2.5 V Reverse Current (VR = 5V) IR Hyper Red - 10 µA Temperature Coefficient of λ peak TC Hyper Red 0.13 - nm/°C IF = 20mA, -10°C ≤ T ≤ 85°C λpeak Temperature Coefficient of λ dom TC Hyper Red 0.06 - nm/°C IF = 20mA, -10°C ≤ T ≤ 85°C λdom Temperature Coefficient of VF TC Hyper Red -2.0 - mV/°C IF = 20mA, -10°C ≤ T ≤ 85°C V Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25°C A Parameter Symbol Value Unit Power Dissipation P 75 mW D Reverse Voltage V 5 V R Junction Temperature T 115 °C j Operating Temperature T -40 to +85 °C op Storage Temperature T -40 to +85 °C stg DC Forward Current I 30 mA F Peak Forward Current IFM [1] 185 mA Electrostatic Discharge Threshold (HBM) - 3000 V Thermal Resistance (Junction / Ambient) R [2] 440 °C/W thJA Thermal Resistance (Junction / Solder point) R [2] 285 °C/W thJS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAD0911 / 1203001434 Rev No: V.16A Date: 04/08/2019

APHHS1005SURCK TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION Red 100% -15° 0° 15° a. u.) 80% Ta = 25 °C Ta = 25 °C -30° 30° y ( -45° 45° sit 60% n e e Int 40% -60° 60° v ati Rel 20% -75° 75° 0% 350 400 450 500 550 600 650 700 750 800 -90° 90° Wavelength (nm) 1.0 0.5 0.0 0.5 1.0 HYPER RED Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 at 2.5 A) 50 at 2.5 Forward current (mA) 12340000 Ta = 25 °C ous intensity normalised 20 mA 0112....5050 Ta = 25 °C ssible forward current (m 12340000 ous intensity normalised T = 25 °Ca 0112....5050 0 Lumin 0.0 Permi 0 Lumin 0.0 1.5 1.7 1.9 2.1 2.3 2.5 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. Page 3 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAD0911 / 1203001434 Rev No: V.16A Date: 04/08/2019

APHHS1005SURCK PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes Page 4 / 4 © 2019 Kingbright. All Rights Reserved. Spec No: DSAD0911 / 1203001434 Rev No: V.16A Date: 04/08/2019

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: APHHS1005SURCK