1.0X0.5mm SMD CHIP LED LAMP Part Number: APHHS1005QWF/D White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions (cid:122) 1.0mmX0.5mm SMT LED, 0.5mm thickness. (cid:122) The source color devices are made with InGaN Light (cid:122) Low power consumption. Emitting Diode. (cid:122) Wide viewing angle. (cid:122) Electrostatic discharge and power surge could damage (cid:122) Ideal for backlight and indicator. the LEDs. (cid:122) Package: 2000pcs / reel . (cid:122) It is recommended to use a wrist band or anti- (cid:122) Moisture sensitivity level : level 3. electrostatic glove when handling the LEDs. (cid:122) RoHS compliant. (cid:122) All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228

Selection Guide Iv (mcd) [2] V i e w i n g @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 APHHS1005QWF/D White (InGaN) Yellow Fluorescent 120 200 120° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2.Luminous intensity/ luminous Flux: +/-15%. 3.Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions VF [1] Forward Voltage White 3.3 4.0 V IF=20mA IR Reverse Current White 50 uA VR = 5V x [2] 0.31 Chromaticity Coordinates White y [2] 0.31 C Capacitance White 100 pF VF=0V;f=1MHz Notes: 1.Forward Voltage: +/-0.1V. 2.Measurement Tolerance Of The Chromaticity Coordinates Is ±0.01. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1.1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228

White APHHS1005QWF/D SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228

White APT1608QWF/D White CIE 0.40 c0 0.35 b1 y 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 a2 a0 b2 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 b1 c0 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228

APHHS1005QWF/D Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228

PACKING & LABEL SPECIFICATIONS APHHS1005QWF/D Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAK0125 REV NO: V.5B DATE: AUG/22/2014 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203009228

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: APHHS1005QWF/D