3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: APBL3025ESGC-F01 High Efficiency Red Super Bright Green Features Descriptions (cid:122) 3.0mmx2.5mm SMT LED, 1.4mm thickness. (cid:122) The High Efficiency Red source color devices are made (cid:122) Low power consumption. with Gallium Arsenide Phosphide on Gallium Phosphide (cid:122) Wide viewing angle. Orange Light Emitting Diode. (cid:122) Ideal for back light and indicator. (cid:122) The Super Bright Green source color devices are made (cid:122) Inner lens type. with Gallium Phosphide Green Light Emitting Diode. (cid:122) Moisture sensitivity level : level 3. (cid:122) Package : 2000pcs / reel. (cid:122) RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE5938 REV NO: V.10A DATE: MAR/17/20135 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000884

Selection Guide Iv (mcd) [2] V i e w i n g @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 12 20 High Efficiency Red (GaAsP/GaP) *8 *15 APBL3025ESGC-F01 Water Clear 100° 12 20 Super Bright Green (GaP) *12 *20 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 λpeak Peak Wavelength Super Bright Green 565 nm IF=20mA High Efficiency Red 617 λD [1] Dominant Wavelength Super Bright Green 568 nm IF=20mA High Efficiency Red 45 Δλ1/2 Spectral Line Half-width Super Bright Green 30 nm IF=20mA High Efficiency Red 15 C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz High Efficiency Red 2 2.5 VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA High Efficiency Red 10 IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE5938 REV NO: V.10A DATE: MAR/17/20135 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000884

APBL3025ESGC-F01 High Efficiency Red SPEC NO: DSAE5938 REV NO: V.10A DATE: MAR/17/20135 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000884

Super Bright Green SPEC NO: DSAE5938 REV NO: V.10A DATE: MAR/17/20135 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000884

APBL3025ESGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAE5938 REV NO: V.10A DATE: MAR/17/20135 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000884

PACKING & LABEL SPECIFICATIONS APBL3025ESGC-F01 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAE5938 REV NO: V.10A DATE: MAR/17/20135 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203000884

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: APBL3025ESGC-F01