APB3025YSGC-F01 3.0 x 2.5 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Yellow source color devices are made with (cid:122) Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode The Super Bright Green source color devices are (cid:122) made with Gallium Phosphide Green Light Emitting Diode Yellow FEATURES Green 3.0 mm x 2.5 mm SMD LED, 1.1 mm thickness (cid:122) Bi -color, low power consumption (cid:122) Wide viewing angle (cid:122) Ideal for backlight and indicator (cid:122) Package: 2000 pcs / reel (cid:122) Moisture sensitivity level: 3 (cid:122) RoHS compliant (cid:122) APPLICATIONS Backlight (cid:122) Status indicator (cid:122) Home and smart appliances (cid:122) (cid:122) Wearable and portable devices RECOMMENDED SOLDERING PATTERN Healthcare applications (units : mm; tolerance : ± 0.1) (cid:122) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Emitting Color Iv (mcd) @ 20mA [2] V i e w i n g A ngle [1] Part Number Lens Type (Material) Min. Typ. 2θ1/2 ■ Yellow (GaAsP/GaP) 5 10 APB3025YSGC-F01 Water Clear 160° ■ Super Bright Green 8 15 (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAE5919 / 1203000776 Rev No: V.13B Date: 01/16/2018

APB3025YSGC-F01 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25°C A Value Parameter Symbol Emitting Color Unit Typ. Max. Yellow 590 Wavelength at Peak Emission IF = 20mA λpeak Super Bright Green 565 - nm Yellow 588 Dominant Wavelength IF = 20mA λdom [1] Super Bright Green 568 - nm Spectral Bandwidth at 50% Φ REL MAX Yellow 35 Δλ - nm IF = 20mA Super Bright Green 30 Yellow 20 Capacitance C - pF Super Bright Green 15 Yellow 2.1 2.5 Forward Voltage IF = 20mA VF [2] Super Bright Green 2.2 2.5 V Yellow 10 Reverse Current (VR = 5V) IR Super Bright Green - 10 uA Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25°C A Value Parameter Symbol Unit Yellow Super Bright Green Power Dissipation P 75 62.5 mW D Reverse Voltage V 5 5 V R Junction Temperature T 110 110 °C J Operating Temperature T -40 To +85 °C op Storage Temperature T -40 To +85 °C stg DC Forward Current I 30 25 mA F Peak Forward Current IFM [1] 140 140 mA Electrostatic Discharge Threshold (HBM) - 8000 8000 V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAE5919 / 1203000776 Rev No: V.13B Date: 01/16/2018

APB3025YSGC-F01 TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION GreenYellow a. u.)10800%% Ta = 25 °C Ta = 25 °C -30° -15° 0° 15° 30° sity ( 60% -45° 45° n e e Int 40% -60° 60° v ati el 20% R -75° 75° 0% 350 400 450 500 550 600 650 700 750 800 -90° 90° Wavelength (nm) 1.0 0.5 0.0 0.5 1.0 YELLOW Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature Forward current (mA) 12345000000 Ta = 25 °C Luminous intensity normalised at20 mA 001122......050505 Ta = 25 °C Permissible forward current (mA) 12345000000 Luminous intensity normalisedat T = 25 °Ca 001122......050505 1.5 1.7 1.9 2.1 2.3 2.5 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) SUPER BRIGHT GREEN Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature Forward current (mA) 12345000000 Ta = 25 °C Luminous intensity normalised at20 mA 001122......050505 Ta = 25 °C Permissible forward current (mA) 12345000000 Luminous intensity normalisedat T = 25 °Ca 001122......050505 1.7 1.9 2.1 2.3 2.5 2.7 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) Page 3 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAE5919 / 1203000776 Rev No: V.13B Date: 01/16/2018

APB3025YSGC-F01 TECHNICAL DATA TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes Page 4 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAE5919 / 1203000776 Rev No: V.13B Date: 01/16/2018

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: APB3025YSGC-F01