AP Series Industrial Pushbutton Switch Features/Benefits Typical Applications A • IP67 sealed • Harsh environments • 1,000,000 life cycle • Off-Road n o • Illumination / non-illumination • Industrial t • Medical t • Multiple colored caps u • Transportation b • Threaded or snap-in mounting h • Joystick control modules s • Caps available separately • Gaming u • RoHS compliant P • Military Specifications Materials FUNCTION: SPST Momentary HOUSING: PBT CONTACT ARRANGEMENT: N.O. BASE: PBT MOUNTING TYPE: CAP: PBT Snap-in (no panel seal) ACTUATOR: Threaded body (hex nut, lock washer, and panel seal gasket provided) Illuminated: Clear polycarbonate Torque spec for threaded body: Do not exceed 8-9 in-lbs (0.9-1.0 N.m) Non-illuminated: PBT Mechanical INTERNAL SEAL: Silicone rubber OPERATING LIFE: 1,000,000 cycles TERMINALS: Copper alloy, gold over silver plating TOTAL TRAVEL: 2.1 ± 0.2 mm MOVABLE CONTACT: Copper alloy, gold over silver plating OPERATING POINT 1.55 ± 0.25 mm TERMINAL SEAL: Epoxy OVER TRAVEL: 0.6 min. WIRE LEADS: UL1569 Black 22 AWG OPERATING FORCE: 4N ± 1N standard configuration; other force Operating Environment option 2N ± 0.5N VIBRATION: 10-500 Hz 10g Max OPERATING TEMPERATURE: -40˚C to 85˚C (+105˚C non-illuminated) SHOCK: 60g 11ms sawtooth wave ESD PROTECTION: 20 KV min. Electrical Process Environment CONTACT RATING: 200mA @ 24 V DC resistive (500,000 cycles) SEALING: IP67 for threaded body 100mA @ 50 V DC resistive (500,000 cycles) IP65 for snap-in version (no panel seal) 400mA @ 32 V AC resistive (500,000 cycles) 125mA @ 125 V AC resistive (1,000,000 cycles) DIELECTRIC STRENGTH: 1000 V AC min. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. INSULATION RESISTANCE: 1 G Ω @ 500 VDC INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads) BOUNCE TIME: <5 ms Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. A P B E Designation AP AP Series Terminal Seal Operating Force E Epoxy 2 2 Newtons All models are epoxy sealed 4 4 Newtons Actuator Style Contact Material D Dome / Convex B Gold C Concave E Extended Dome Termination N None Z Solder Lug W 12” Wire Leads 22 AWG Actuator Color C*** PC Terminals 0 No Cap Illumination 2 Black 00 No LED* Bushing Style** Please contact Customer 3 Red 01 Super White S** Snap-in plastic Service for additional 4 Orange 02 Bi-color; Red (Green) T Threaded plastic colors and paint / laser 5 Yellow 03 Red etched button options. 6 Green 05 Amber ** No panel seal option 7 Blue 06 Green *** PC terminals not available with illumination 9 Gray 07 Super Blue 08 Bi-color; Amber (Green) Contact Customer Service for additional hardware options. * No LED available in short body only Specifications and dimensions subject to change A-108 www.ckswitches.com

AP Series Industrial Pushbutton Switch STANDARD VIEW A 28,00 [1.102] P 10,90 ELECTRICAL SCHEMATIC u [0.429] 4 s ø 17,40 ø 12,35 4,20 h [0.685] [0.486] [0.165] b 1[,05.0059] 3,90 1 2 u [0.154] t 3 4 t o 8[,08.0346] n 1 2 3 5[,04.5215] SPST-NO SEE SCHEMATIC 7,74 4,50 [0.305] [0.177] OPERATING FORCE OPTION CODE OPERATING FORCE 2 2 N, 200 g 4 4 N, 400 g ACTUATOR STYLE D E C DOME / CONVEX EXTENDED DOME CONCAVE 3,54 TYP 3,54 TYP 0,65 [0.140] [0.140] [0.026] 3,99 TYP [0.157] 7,74 TYP 7,74 TYP 8,19 TYP [0.305] [0.305] [0.323] 1[,06.4065] TYP 1[,06.4065] TYP 2[,00.9082] TYP DOWN POSITION Terminal Seal E Epoxy All models are epoxy sealed ACTUATOR COLOR OPTION CODE ACTUATOR COLOR 0 No Cap 2 Black 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray Third Angle For additional colors please contact Customer Service. Projection Dimensions are shown: mm (inches Specifications and dimensions subject to change www.ckswitches.com A-109

AP Series Industrial Pushbutton Switch ILLUMINATION A n OPTION ILLUMINATION TYPICAL INTENSITY* PEAK o CODE TYPE MIN MAX WAVELENGTH Vf Forward Voltage t ut (mcd) (nm) b 00 Model without illumination N/A N/A h 01 LED Super White 4,000 5,000 N/A 3.5 s u 02 LED Bi-Color – Red (Green) 10 20 635/565 2.0 P 03 LED Red 4 8 700 2.0 05 LED Amber 35 50 610 2.0 06 LED Green 35 50 565 2.0 07 LED Super Blue 800 1,500 470 3.8 08 LED Bi-Color – Amber (Green) 10 10 585/565 2.0 *LED FORWARD CURRENT: 20 mA LED FORWARD VOLTAGE: see chart above LED REVERSE VOLTAGE: 5.0 V MAX * For information on specific and custom LED, please contact Customer Service. + Anode - Cathode NOTE: For bi-color LED’s the polarity must be reversed to alternate the color 3 4 BUSHING STYLE S SNAP-IN 28,00 24,00 [1.102 ] [0.945 ] 7,74 20,25 7,75 16,25 [0.305 ] [0.797 ] [0.305 ] [0.640 ] SNAP-IN SNAP-IN WITH ILLUMINATION NO ILLUMINATION 1,50 1,50 [0.059 ] [0.059 ] T THREADED PLASTIC M13 X 1.25-6g M13 X 1.25-6g THREADED WITH THREADED ILLUMINATION 0,85 NO ILLUMINATION 0,85 [0.033 ] [0.033 ] PANEL CUTOUT øA B PANEL THICKNESS DIM A (± 0.05 mm) DIM B (± 0.05 mm) 1 mm 13.70 mm 13.00 mm [0.039 in] [0.539 in] [0.512 in] 2 mm 13.80 mm 13.00 mm [0.079 in] [0.539 in] [0.512 in] 3 mm 13.90 mm 13.10 mm [0.118 in] [0.547 in] [0.516 in] THREADED BODY 13.70 mm 13.00 mm Third Angle MIN PANEL THICKNESS 1 mm [0.539 in] [0.512 in] Projection A 0.1mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version. Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-110

AP Series Industrial Pushbutton Switch TERMINATION A Z SOLDER LUG P LED TERMINAL u [03.,19504] CATHODE (-) s 0,75 TYP h [0.030] b LED TERMINAL ANODE (+) u 0,50 TYP t [0.020] 6,44 TYP to [0.254] 2,83[ 0. 1T1Y1P] 2[0,8.131 1] TYP 2,75 n [0.108] 0,50 TYP [0.020] LED TERMINAL ANODE (+) 2,04 TYP [0.080] * Switching terminals are gold and LED terminals are silver LED TERMINAL CATHODE (-) 5,65 TYP [0.222] C PC TERMINALS *** Illumination not available with PC Terminals 2,50 TYP [0.098] 0,50 [0.020] 0,70 [0.028] 5,65 TYP [0.222] 5,70 [0.224] 2X ø 1,00 [0.039] PCB HOLE PATTERN BOARD VIEW W 12” WIRE LEADS 22 AWG 34,78 TYP [1.369] 28,44 TYP [1.120] 27,04 TYP [1.065] 20,69 TYP [0.815] WIRE LEADS WITH WIRE LEADS WITH POTTED BASE, POTTED BASE, SNAP-IN SNAP-IN ILLUMINATION NO ILLUMINATION 304,81 304,81 ø[ 01.14,3171] 2W2I [RA1WE2.L0GE0 A0S]DTDS ø[ 01.14,3171] 2W2I [RA1WE2.L0GE0 A0S]DTDS WIRE LEADS WITH WIRE LEADS WITH POTTED BASE, POTTED BASE, THREADED THREADED ILLUMINATION NO ILLUMINATION 304,81 304,81 [12.000] [12.000] WIRELEADS WIRELEADS 22 AWG STD 22 AWG STD Wires: Black wires - Terminals Red wires - LED (+) Positive Third Angle White wire - LED (-) Negative Projection Dimensions are shown: mm (inches Specifications and dimensions subject to change www.ckswitches.com A-111

AP Series Industrial Pushbutton Switch CONTACT MATERIAL A n B GOLD OPTION o CODE CONTACT MATERIAL t B Gold t u b TERMINAL SEAL h s u P E EPOXY All models are epoxy sealed HARDWARE LOCK WASHER HEX NUT 2.40 Part Number 647D00000 ø17.25 Part number 515D00000 18.36 REF ø15.90 M13 X 1.25-6H 13.82 0.77 15.90 PANEL SEAL Part Number 655D00000 See Detail A 4X 0.13 0.30 4X R 0.13 REF 0.56 REF Detail A 2 X ø 14.60 Scale 15:1 2 X ø 16.30 ø 17.00 ø 13.80 A A Caps available on next page TThhiirrdd AAnnggllee PPrroojjeeccttiioonn Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-112

AP Series Industrial Pushbutton Switch AVAILABLE CAPS A P u s h 481D XX XXX b u t t Cap Color o Style n OPTION CAP COLOR PART NUMBER HOLE STYLE 01 WHITE 481DXX000 NO DOME 02 BLACK 481DXX001 YES DOME 03 RED 481DXX002 NO EXTENDED DOME 04 ORANGE 481DXX003 YES EXTENDED DOME 05 YELLOW 481DXX004 NO CONCAVE 06 GREEN 481DXX005 YES CONCAVE 07 BLUE 08 BROWN 09 GRAY ø 12.35 ø 3.00 DOME THRU HOLE 481DXX000 = NO HOLE 481DXX001 = HOLE 6.10 6.25 ø12.35 EXTENDED DOME ø3.00 THRU HOLE 481DXX002 = NO HOLE 481DXX003 = HOLE 6.10 6.15 ø 12.35 CONCAVE ø3.00 THRU HOLE 0.65 481DXX004 = NO HOLE 481DXX005 = HOLE 0.61 6.69 6.69 Third Angle Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-113