ALSR, ALVR www.vishay.com Vishay Huntington Wirewound Resistors, Commercial Power, Silicone Coated, Axial Lead FEATURES • High temperature coating (> 350 °C) • All welded construction • Available with “vitreous like appearance” coating as ALVR • Available in non-inductive styles with Ayrton- Perry winding for lowest reactive components, special “NI” • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING (1) POWER RATING (1) RESISTANCE WEIGHT GLOBAL HISTORICAL TOLERANCE (2) P W P W RANGE (typical) MODEL MODEL 25 °C 25 °C % CHARACTERISTIC U +250 °C CHARACTERISTIC V +350 °C  g ALSR01 ALSR-1 1 - 0.10 to 6.37K 1, 3, 5, 10 0.27 ALVR01 ALVR-1 1 - 0.10 to 6.37K 1, 3, 5, 10 0.27 ALSR03 ALSR-3 3 - 0.10 to 12K 1, 3, 5, 10 0.68 ALVR03 ALVR-3 3 - 0.10 to 12K 1, 3, 5, 10 0.68 ALSR5A ALSR-5A 4 5 0.10 to 40.3K 1, 3, 5, 10 2.1 ALVR5A ALVR-5A 4 5 0.10 to 40.3K 1, 3, 5, 10 2.1 ALSR05 ALSR-5 5 7 0.10 to 58.5K 1, 3, 5, 10 3.2 ALVR05 ALVR-5 5 7 0.10 to 58.5K 1, 3, 5, 10 3.2 ALSR10 ALSR-10 7 10 0.10 to 92K 1, 3, 5, 10 4.9 ALVR10 ALVR-10 7 10 0.10 to 92K 1, 3, 5, 10 4.9 Notes (1) Vishay Huntington ALSR / ALVR models have two power ratings depending on operation temperature and stability requirements. Models not available for characteristic V are: ALSR01, ALVR01, ALSR03, and ALVR03. (2) Other tolerances may be available, contact factory. GLOBAL PART NUMBER INFORMATION Global Part Numbering example: ALSR0325R00FE12NI A L S R 0 3 2 5 R 0 0 F E 1 2 N I GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (6 digits) (5 digits) (1 digit) (3 digits) (up to 2 digits) (see Standard Electrical R = decimal F = ± 1.0 % E07 = tape / reel (dash number) Specifications Global K = thousand H = ± 3.0 % (ALSR5A / ALVR5A, ALSR05 / ALVR05) from 1 to 99 Model column for 1R500 = 1.5  J = ± 5.0 % E08 = tape / reel (ALSR01 / ALVR01) as applicable options) 1K500 = 1.5 k K = ± 10.0 % E29 = tape / reel (ALSR10 / ALVR10) NI = non-inductive E48 = tape / reel (ALSR03 / ALVR03) E70 = tape / reel, 1K pieces (smaller than ALSR05 / ALVR05) E73 = tape / reel, 500 pieces E12 = bulk, 100 pc boxes Historical Part Number example: ALSR-3-25-1 %-NI ALSR-3 25  1 % NI HISTORICAL MODEL RESISTANCE VALUE TOLERANCE SPECIAL Revision: 18-Feb-16 1 Document Number: 31800 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ALSR, ALVR www.vishay.com Vishay Huntington DIMENSIONS in inches [millimeters] 1.50 [38.10] D L min. LD DIMENSIONS in inches [millimeters] GLOBAL MODEL L D LD ± 0.032 [0.813] ± 0.032 [0.813] ± 0.002 [0.051] ALSR01 0.406 [10.31] 0.110 [2.79] 0.020 [0.508] ALVR01 0.406 [10.31] 0.110 [2.79] 0.020 [0.508] ALSR03 0.500 [12.70] 0.180 [4.57] 0.032 [0.813] ALVR03 0.500 [12.70] 0.180 [4.57] 0.032 [0.813] ALSR5A 0.920 [23.37] 0.200 [5.08] 0.032 [0.813] ALVR5A 0.920 [23.37] 0.200 [5.08] 0.032 [0.813] ALSR05 0.875 [22.23] 0.312 [7.92] 0.032 [0.813] ALVR05 0.875 [22.23] 0.312 [7.92] 0.032 [0.813] ALSR10 1.730 [43.94] 0.312 [7.92] 0.032 [0.813] ALVR10 1.730 [43.94] 0.312 [7.92] 0.032 [0.813] MATERIAL SPECIFICATIONS DERATING Element: copper-nickel alloy or nickel-chrome alloy, % 120 depending on resistance value N R I 100 Core: ceramic: steatite or alumina, depending on physical E W 80 size O P Characteristic V End Caps: stainless steel D 60 E T Coating: special high temperature silicone or special A 40 R formula of “vitreous like appearance” coating on ALVR Characteristic U 20 Terminals: tinned Copper clad steel 0 Part Marking: HEI, model, value, tolerance, date code - 6-5 50 0 25 50 100 15A0MBIE2N00T TEM25P0ERA3T0U0RE I3N5 0°C TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR CHARACTERISTICS Temperature Coefficient ppm/°C ± 30 for 10  and above; ± 50 for 1  to 9.9 ; ± 90 for 0.5  to 0.99  Terminal Strength lb 10 minimum Dielectric Withstanding Voltage V 500 for 1 W and 1000 for 3 W and above AC Operating Temperature Range °C Characteristic U = -65 to +250, characteristic V = -65 to +350 Maximum Working Voltage V (P x R)1/2 PERFORMANCE TEST LIMITS TEST CONDITIONS OF TEST (CHARACTERISTIC V) Thermal Shock Rated power applied until thermally stable, then a minimum of 15 min at -55 °C ± (2.0 % + 0.05 ) > R Short Time Overload 5x rated power (3 W and smaller), 10x rated power (4 W and larger) for 5 s ± (2.0 % + 0.05 ) > R Dielectric Withstanding Voltage 500 VRMS, 1 min for 1 W and 1000 VRMS, 1 min for 3 W and above ± (0.1 % + 0.05 ) > R Low Temperature Storage -65 °C for 24 h ± (2.0 % + 0.05 ) > R High Temperature Exposure 250 h at U = +250 °C, V = +350 °C ± (4.0 % + 0.05 ) > R Mechanical Shock MIL-STD-202 method 213, 100 g’s for 6 ms, 10 shocks ± (0.2 % + 0.05 ) > R Vibration Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.2 % + 0.05 ) > R Load Life 2000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (3.0 % + 0.05 ) > R Moisture Resistance MIL-STD-202 method 106, 7b not applicable ± (2.0 % + 0.05 ) > R Revision: 18-Feb-16 2 Document Number: 31800 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000