HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | || | | | FEATURES: APPLICATIONS: • Higher Q and lower DCR than other 0603 inductors • Widely used in communications applications such as cell phones, • Very high SRF – as high as 8.5 GHz cable modems, ADSL, repeaters. • Excellent current handling capability – up to 2100mA • Bluetooth, W-LAN, GPS, Broadband Network • Wide range of Inductance values available for flexible needs • Video cameras, liquid crystal television, and other electronic devices • Tight tolerance of 2% is available. • Suitable for RF circuit ELECTRICAL SPECIFICATIONS: PPAARRAAMMEETTEERRSS ABRACON P/N: AISC-0603HPSeries Operating temperature: -40°C to + 125°C Storage temperature: -10ºC to +40ºC, 20% to 70% RH in Tape & Reel Typ. Part Number Min. Quality L/Q Test Max. DC Max. Rated Min. Self-resonant AISC-0603HP- Inductance Tolerance Quality Factor @ Freq. Resistance Current Frequency Inductance Code Factor 250MHz /900MHz Units nH - - MHz Ω mA MHz Symbol L - Q Freq. DCR Ir S.R.F AISC-0603HP-1N7 1.7 B, S 24 250 31/50 0.033 2100 8500 AISC-0603HP-2N2 2.2 B, S 13 250 15/27 0.150 900 7000 AISC-0603HP-3N3 3.3 B, S 35 250 37/64 0.035 1700 6900 AISC-0603HP-3N6 3.6 B, S 35 250 42/67 0.035 1700 6900 AISC-0603HP-3N9 3.9 B, S 30 250 39/62 0.039 1600 6900 AISC-0603HP-4N3 4.3 B, S 30 250 40/64 0.045 1500 6000 AISC-0603HP-4N7 4.7 B, S 22 250 29/50 0.090 1100 5800 AISC-0603HP-5N1 5.1 B, J, K 20 250 27/46 0.108 1000 5700 AISC-0603HP-6N2 6.2 B, J, K 35 250 44/68 0.050 1400 5800 AISC-0603HP-6N8 6.8 B, J, K 35 250 50/79 0.050 1400 5800 AISC-0603HP-7N2 7.2 B, J, K 35 250 47/71 0.052 1400 4800 AISC-0603HP-7N5 7.5 B, J, K 35 250 46/74 0.070 1300 4800 AISC-0603HP-8N2 8.2 B, J, K 35 250 45/69 0.054 1400 4300 AISC-0603HP-8N7 8.7 B, J, K 30 250 38/61 0.100 1000 4600 AISC-0603HP-9N1 9.1 J, K 28 250 35/57 0.108 1000 4300 AISC-0603HP-9N5 9.5 J, K 35 250 50/76 0.060 1350 5000 AISC-0603HP-10N 10 G, J, K 35 250 50/82 0.060 1350 4800 AISC-0603HP-11N 11 G, J, K 35 250 54/82 0.060 1350 4200 AISC-0603HP-12N 12 G, J, K 35 250 52/80 0.078 1200 4000 AISC-0603HP-15N 15 G, J, K 38 250 54/83 0.085 1100 4000 AISC-0603HP-16N 16 G, J, K 38 250 53/78 0.085 1100 3300 AISC-0603HP-18N 18 G, J, K 38 250 51/71 0.078 1200 3100 AISC-0603HP-22N 22 G, J, K 40 250 55/75 0.120 950 3000 AISC-0603HP-23N 23 G, J, K 40 250 55/75 0.120 950 2850 AISC-0603HP-24N 24 G, J, K 40 250 50/66 0.080 1100 2650 AISC-0603HP-27N 27 J, K 40 250 53/68 0.125 950 2800 AISC-0603HP-30N 30 G, J, K 40 250 55/66 0.130 920 2400 AISC-0603HP-33N 33 G, J, K 40 250 51/55 0.170 680 2300 AISC-0603HP-36N 36 G, J, K 40 250 55/63 0.150 750 2300 AISC-0603HP-39N 39 G, J, K 40 250 55/58 0.180 680 2200 AISC-0603HP-43N 43 G, J, K 40 250 52/53 0.170 810 2100 AISC-0603HP-47N 47 G, J, K 38 200 51/50 0.200 680 2000 AISC-0603HP-51N 51 G, J, K 38 200 50/46 0.250 660 1900 AISC-0603HP-56N 56 G, J, K 38 200 53/46 0.230 700 1900 AISC-0603HP-68N 68 G, J, K 38 200 50/39 0.280 650 1700 AISC-0603HP-72N 72 G, J, K 34 150 50/38 0.350 580 1700 AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale Revised: 04.06.13 ISIOS O90 90010 /1 Q:2S0 098000 30332 Esperanza, Rancho Santa Margarita, Californi9a2 6 88 CCEERRTTIIFFIIEEDD tel 949-546-8000| fax 949-546-8001| www.abracon.com

HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | | || | | Typ. Part Number Min. Quality L/Q Test Max. DC Max. Rated Min. Self-resonant AISC-0603HP- Inductance Tolerance Quality Factor @ Freq. Resistance Current Frequency Inductance Code Factor 250MHz /900MHz Units nH - - MHz Ω mA MHz Symbol L - Q Freq. DCR Ir S.R.F AISC-0603HP-75N 75 G, J, K 34 150 46/35 0.42 550 1700 AISC-0603HP-82N 82 G, J, K 34 150 51/36 0.46 510 1600 AISC-0603HP-91N 91 G, J, K 34 150 48/33 0.42 550 1500 AISC-0603HP-R10 100 G, J, K 34 150 52/32 0.54 470 1400 AISC-0603HP-R11 110 G, J, K 33 150 46/29 0.54 470 1350 AISC-0603HP-R12 120 G, J, K 33 150 50/33 0.65 420 1300 AISC-0603HP-R15 150 G, J, K 30 150 46/22 0.82 390 1150 AISC-0603HP-R18 180 G, J, K 28 100 48/20 1.2 320 1050 AISC-0603HP-R20 200 G, J, K 28 100 45/10 1.3 310 1000 AISC-0603HP-R21 210 G, J, K 28 100 48/12 1.9 280 1000 AISC-0603HP-R22 220 G, J, K 28 100 47/16 1.9 280 950 AISC-0603HP-R25 250 G, J, K 28 100 46/- 2.0 260 900 AISC-0603HP-R27 270 G, J, K 28 100 48/- 2.2 260 900 AISC-0603HP-R30 300 G, J, K 28 100 44/- 2.7 220 780 AISC-0603HP-R33 330 G, J, K 28 100 43/- 2.9 200 750 AISC-0603HP-R36 360 G, J, K 28 100 45/- 3.8 180 720 AISC-0603HP-R39 390 G, J, K 28 100 43/- 3.8 180 700 Test Conditions 1. Inductance is measured in HP-4287A RF LCR meter with HP-16193 fixture. 2. SRF is measured in ENA E5071B network analyzer 3. RDC is measured in HP-4338B milliohmeter. 4. Definition of Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 25oC against chip initial surface temperature (Ta) PART NUMBER IDENTIFICATION AISC-0603HP- - Tolerance Inductance Code Packaging Code P lease refer to the Table B: ± 0.2nH T: 3kpcs/ reel S: ± 0.3nH G: ±2% J: ±5% K: ±10% Revised: 04.06.13 AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale ISIOS O90 90010 /1 Q:2S0 098000 30332 Esperanza, Rancho Santa Margarita, Californi9a2 6 88 CCEERRTTIIFFIIEEDD tel 949-546-8000| fax 949-546-8001| www.abracon.com

HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | || | | | OUTLINE DIMENSIONS Recommended Land Pattern A B C L W T S W1 t 1 1.92 0.64 1.27 1.80 max 1.12 max 1.02 max 0.36 ± 0.10 0.76 ref 0.50 ref Dimension: mm ELECTRODE MATERIALS Components Material 1st Layer Ag/Pd 2nd Layer Nickel 3rd Layer Tin Revised: 04.06.13 AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale ISIOS O90 90010 /1 Q:2S0 098000 30332 Esperanza, Rancho Santa Margarita, Californi9a2 6 88 CCEERRTTIIFFIIEEDD tel 949-546-8000| fax 949-546-8001| www.abracon.com

HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | | || | | REFLOW PROFILE TAPE & REEL: T= tape and reel (3,000pcs/reel) A B F K T W 1.15 1.80 4.00 0.95 0.20 8.00 Dimension: mm Storage period Use the product within 12 months after delivered. Solderability should be checked if this period is exceeded. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Revised: 04.06.13 AABBRRAACCOONN IISS Visit www.abracon.com for Terms & Conditions of Sale ISIOS O90 90010 /1 Q:2S0 098000 30332 Esperanza, Rancho Santa Margarita, Californi9a2 6 88 CCEERRTTIIFFIIEEDD tel 949-546-8000| fax 949-546-8001| www.abracon.com