NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 SINGLE PHASE HALL EFFECT LATCH Description Pin Assignments AH375 is an integrated Hall-Effect latched sensor designed for electronic commutation of brush-less DC motor applications. The (Front View) device includes an on-chip Hall voltage generator for magnetic 3.OUT sensing, a comparator that amplifies the Hall voltage, and a Schmitt 2.GND trigger to provide switching hysteresis for noise rejection, and open 1.Vdd drain output. An internal band-gap regulator provides a temperature compensated supply voltage for internal circuits and allows a wide SIP-3 (Bulk Pack) operating supply range. (Top View) When the magnetic flux density (B) is larger than operate point (Bop), output is switched on (OUT pin is pulled low). The output state is held 3. OUT on until a magnetic flux density reversal falls below Brp. When B is GND 2. less than Brp, the output is switched off. 1. Vdd SC59 The AH375 is available in SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) and SC59 packages. Applications • Brush-Less DC Motor Features • Brush-Less DC Fan • Revolution Counting • Bipolar Hall-Effect Latch Sensor • Speed Measurement • 2.2V to 20V DC Operating Voltage • Temperature Compensation • Open Drain Pre-Driver • 25mA Maximum Output Sink Current • Operating Temperature: -40C to +125C • SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) and SC59 Packages (SC59 is Commonly Known as SOT23 in Asia)  Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Typical Applications Circuit Vdd R L C 1 AH375 3 Output 2 GND AH375 1 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Pin Descriptions Pin Name P/I/O Pin # Description Vdd P 1 Positive Power Supply GND P 2 Ground OUT O 3 Output Pin Functional Block Diagram V dd 1 Regulator 23 OUT Hall plate Amp 2 GND Absolute Maximum Ratings (TA = +25C) Symbol Characteristics Values Unit Vdd Supply Voltage 20 V B Magnetic Flux Density Unlimited V Output OFF Voltage 30 V DS Id Output “On” Current Continuous 25 mA T Storage Temperature Range -65 to +150 C S TJ(MAX) Maximum Junction Temperature +150 C SIP-3 (Ammo Pack) 550 P Package Power Dissipation SIP-3 (Bulk Pack) 550 mW D SC59 230 SIP-3 (Ammo Pack) 227 θJC Thermal Resistance SIP-3 (Bulk Pack) 227 C/W SC59 543 Recommended Operating Conditions Symbol Parameter Conditions Min Max Unit Vdd Supply Voltage (Note 4) Operating 2.2 20 V TA Operating Ambient Temperature Operating -40 +125 C Notes: 4. The output of IC will be switched after the supply voltage is over 2.2V, but the magnetic characteristics won't be normal until the supply is over 2.5V. AH375 2 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Electrical Characteristics (TA = +25C, Vdd = 12V) Symbol Characteristic Test Conditions Min Typ. Max Unit VDS (SAT) Output Saturation Voltage IOUT = 20mA - 300 700 mV IOFF Output Leakage Current Vdd = 14V - <0.1 10 µA Idd Supply Current Output Open - 2 4 mA Magnetic Characteristics (TA = +25C, Vdd = 2.5V to 20V, Note 5) (1mT = 10 Gauss) Symbol Parameter Min Typ. Max Unit Bops(South Pole to Brand Side) Operation Point 5 30 60 Gauss Brps(South Pole to Brand Side) Release Point -60 -30 -5 Gauss Bhy(|Bopx|-|Brpx|) Hysteresis - 60 - Gauss Notes: 5. Magnetic characteristics may vary with supply voltage, operating temperature and after soldering. Operating Characteristics Output S S ) ge (off-state) Vdd a Marking side t ol V t Bhy u Turn off Turn on Marking side p t u O N N ( (on-state) VSAT VSAT SC59 SIP-3 (Ammo Pack) Brp 0 Bop SIP-3 (Bulk Pack) (MagneticFluxDensity B) AH375 3 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Performance Characteristics (1) SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) T (C) 25 50 60 70 80 85 90 95 100 A P (mW) 550 440 396 352 308 286 264 242 220 D T (C) 105 110 115 120 125 130 135 140 150 A P (mW) 198 176 154 132 110 88 66 44 0 D (2) SC59 (Commonly Known as SOT23 in Asia) T (C) 25 50 60 70 80 85 90 100 110 120 130 140 150 A PD (mW) 230 184 166 147 129 120 110 92 74 55 37 18 0 AH375 4 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN USE AH3774 AH375 Ordering Information AH375 - X X -X Package Green Packing P : SIP-3 (Ammo Pack) G : Green A : Ammo Box (Note 7) SIP-3 (Bulk Pack) B : Bulk (Note 8) W : SC59 7 : Tape & Reel Bulk 7” Tape and Reel Ammo Box Status Package Packaging Part Part Part Number Part Number (Note 9) Code (Note 6) Quantity Number Quantity Quantity Number Suffix Suffix Suffix SIP-3 AH375-PG-A NRND P NA NA NA NA 4000/Box -A (Ammo Pack) SIP-3 AH375-PG-B NRND P 1000 -B NA NA NA NA (Bulk Pack) AH375-WG-7 NRND W SC59 NA NA 3000/Tape & Reel -7 NA NA Notes: 6. Pad layout as shown on Diodes Incorporated’s suggested pad layout document, which can be found on our website at http://www.diodes.com/package-outlines.html. 7. Ammo Box is for SIP-3 Spread Lead. 8. Bulk is for SIP-3 Straight Lead. 9. NRND = Not Recommended for New Design AH375 5 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Marking Information (1) Package Types: SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) (Top View) Y : Year : 0~9 Part Number 375 WW : Week : 01~52, "52" represents Y WW X 52 and 53 week X : Internal Code : A~Z : Green a~z : Lead Free Part Number Package Identification Code AH375 SIP-3 (Ammo Pack) 375 AH375 SIP-3 (Bulk Pack) 375 (2) Package Type: SC59 (Top View) XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; XX Y W X a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Green a~z : Lead Free Part Number Package Identification Code AH375 SC59 P3 AH375 6 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Package Outline Dimensions (All Dimensions in mm) Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: SIP-3 (Bulk Pack) 0.51mm 2.00 +/- NOM 0.10mm 1.15 +/- 0.10mm BRANDED SURFACE 1 2 3 Active Area Depth Sensor Location Package Dimensions SIP-3 (Bulk Pack) Dim Min Max A 3.9 4.3 a1 5 Typ a2 5 Typ L a1 J a3 45 Typ a4 3 Typ a2 B 2.8 3.2 C B P N C 1.40 1.60 D D 0.33 0.432 E 0.40 0.508 A F 0 0.2 E F G H a3 a4 GH 12..2541 12..3507 J 0.35 0.43 L 14.0 15.0 N 0.63 0.84 P 1.55 - All Dimensions in mm AH375 7 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Package Outline Dimensions (Continued) Please see http://www.diodes.com/package-outlines.html for the latest version. (2) Package Type: SIP-3 (Ammo Pack) SIP-3 (Ammo Pack) Dim Min Max A 3.9 4.3 EF D NC a1 45 Typ a2 3 Typ B 2.8 3.2 A C 1.40 1.60 G a1 D 0.35 0.41 a2 E 0.43 0.48 F (cid:13)0 0.2 B P G 2.4 2.9 N 0.63 0.84 P 1.55 - All Dimensions in mm (3) Package Type: SC59 (Commonly Known as SOT23 in Asia) SC59 Dim Min Max Typ A A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 B C D - - 0.95 G - - 1.90 H 2.90 3.10 3.00 G J 0.013 0.10 0.05 H K 1.00 1.30 1.10 L 0.35 0.55 0.40 K N M MN 00..1700 00..2800 00..1755  0° 8° - J D L All Dimensions in mm AH375 8 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN AH375 USE AH3774 Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: SC59 (Commonly Known as SOT23 in Asia) Y Value Dimensions (in mm) Z C Z 3.4 X 0.8 Y 1.0 C 2.4 E 1.35 X E IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2017, Diodes Incorporated www.diodes.com AH375 9 of 9 July 2017 Document number: DS31172 Rev. 7 - 3 www.diodes.com © Diodes Incorporated

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: D iodes Incorporated: AH375-WG-7 AH375-PG-A AH375-PG-B