Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product Information in this Catalog (4) Power generation control equipment (nuclear power, Product information in this catalog is as of October 2019. All of the hydroelectric power, thermal power plant control system, etc.) contents specified herein and production status of the products listed (5) Undersea equipment (submarine repeating equipment, in this catalog are subject to change without notice due to technical underwater work equipment, etc.) improvement of our products, etc. Therefore, please check for the (6) Military equipment latest information carefully before practical application or use of our (7) Any other equipment requiring extremely high levels of safety products. and/or reliability equal to the equipment listed above Please note that TAIYO YUDEN shall not be in any way responsible *Notes: for any damages and defects in products or equipment incorporating 1. There is a possibility that our products can be used only our products, which are caused under the conditions other than those for aviation equipment that does not directly affect the safe specified in this catalog or individual product specification sheets. operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets ■ Approval of Product Specifications requirements specified separately by TAIYO YUDEN. Please Please contact TAIYO YUDEN for further details of product be sure to contact TAIYO YUDEN for further information specifications as the individual product specification sheets are before using our products for such aviation equipment. available. When using our products, please be sure to approve our 2. Implantable medical devices contain not only internal unit product specifications or make a written agreement on the product which is implanted in a body, but also external unit which is specification with TAIYO YUDEN in advance. connected to the internal unit. ■ Pre-Evaluation in the Actual Equipment and Conditions 4. Limitation of Liability Please conduct validation and verification of our products in actual Please note that unless you obtain prior written consent of TAIYO conditions of mounting and operating environment before using our YUDEN, TAIYO YUDEN shall not be in any way responsible for products. any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment that is not ■ Limited Application intended for use by TAIYO YUDEN, or any equipment requiring 1. Equipment Intended for Use inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN The products listed in this catalog are intended for general- as described above. purpose and standard use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office ■ Safety Design equipment, information and communication equipment including, When using our products for high safety and/or reliability-required without limitation, mobile phone, and PC) and other equipment equipment or circuits, please fully perform safety and/or reliability specified in this catalog or the individual product specification sheets. evaluation. In addition, please install (i) systems equipped with a protection circuit and a protection device and/or (ii) systems TAIYO YUDEN has the line-up of the products intended for equipped with a redundant circuit or other system to prevent an use in automotive electronic equipment, telecommunications unsafe status in the event of a single fault for a failsafe design to infrastructure and industrial equipment, or medical devices ensure safety. classified as GHTF Classes A to C (Japan Classes I to III). Therefore, when using our products for these equipment, ■ Intellectual Property Rights please check available applications specified in this catalog Information contained in this catalog is intended to convey examples or the individual product specification sheets and use the of typical performances and/or applications of our products and is corresponding products. not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any 2. Equipment Requiring Inquiry third parties nor grant any license under such rights. Please be sure to contact TAIYO YUDEN for further information before using the products listed in this catalog for the following ■ Limited Warranty equipment (excluding intended equipment as specified in this Please note that the scope of warranty for our products is limited to catalog or the individual product specification sheets) which may the delivered our products themselves and TAIYO YUDEN shall not cause loss of human life, bodily injury, serious property damage be in any way responsible for any damages resulting from a failure and/or serious public impact due to a failure or defect of the or defect in our products. Notwithstanding the foregoing, if there is products and/or malfunction attributed thereto. a written agreement (e.g., supply and purchase agreement, quality (1) Transportation equipment (automotive powertrain control assurance agreement) signed by TAIYO YUDEN and your company, system, train control system, and ship control system, etc.) TAIYO YUDEN will warrant our products in accordance with such (2) Traffic signal equipment agreement. (3) Disaster prevention equipment, crime prevention equipment (4) Medical devices classified as GHTF Class C (Japan Class III) ■ TAIYO YUDEN’s Official Sales Channel (5) Highly public information network equipment, data- The contents of this catalog are applicable to our products which are processing equipment (telephone exchange, and base purchased from our sales offices or authorized distributors (hereinafter station, etc.) “TAIYO YUDEN’s official sales channel”). Please note that the contents (6) Any other equipment requiring high levels of quality and/or of this catalog are not applicable to our products purchased from any reliability equal to the equipment listed above seller other than TAIYO YUDEN’s official sales channel. 3. Equipment Prohibited for Use ■ Caution for Export Please do not incorporate our products into the following Some of our products listed in this catalog may require specific equipment requiring extremely high levels of safety and/or procedures for export according to“ U.S. Export Administration reliability. Regulations”,“ Foreign Exchange and Foreign Trade Control Law” (1) Aerospace equipment (artificial satellite, rocket, etc.) of Japan, and other applicable regulations. Should you have any (2) Aviation equipment *1 questions on this matter, please contact our sales staff. (3) Medical devices classified as GHTF Class D (Japan Class IV), implantable medical devices *2 20

for General Electronic Equipment for General Electronic Equipment CHIP ANTENNAS CHIP ANTENNAS REFLOW REFLOW ■PARTS NUMBER A F △ 2 1 6 M 2 4 5 0 0 1 - T △＝Blank space ① ② ③ ④ ⑤ ⑥ ⑦ ①Series name ④Special code Code Series name Code Special code AH Multilayer antenna F Inverted F AF Helical antenna M Mono pole N Mono pole（Dual） ②Electrode code Code Electrode code ⑤Frequency △ With plating Code Frequency［MHz］ （example） ③Dimensions（case size） 1575 1574.397～1576.443 Code Dimensions（case size）［mm］ 2450 2400～2500 212 2.0×1.25 5550 3100～8000 216 2.5×1.6 1.Describe Center Frequency 316 3.2×1.6 2.Lower Frequency for Dual band 083 8.0×3.0 104 10.0×4.0 ⑥Spec code 086 8.0×6.0 Code Spec code H 01～ IG PH S1～ Applicable to AH 104F RO F DRE UQ ⑦Packaging CU TE Code Packaging SN C -T Taping Y ■ EXTERNAL DIMENSIONS / STANDARD QUANTITY AH 212M type, AF 216M type AH 316M type AH 083F type L W Directionmark Directionmark FeeLdmark W L W T T T b E b E b b c c ba a AH 104F type AH 104N type AH 086M type Directionmark FLeedmark W Directionmark FLeedmark W Directionmark W LFeedmark T T T b ba c c ba b b ba cb cba b ｂ aｂ aｂ Standard quantity［pcs］ Type L W T E a b c Embossed tape AF 216M 2.5±0.2 1.6±0.2 1.6±0.2 0.5±0.3 - - - 2000 AH 212M 2＋0.3/－0.1 1.25±0.2 0.85±0.2 0.5±0.3 - - - 4000 AH 316M 3.2±0.15 1.6±0.15 0.5±0.1 0.5±0.2 - 1.0min. - 3000 AH 083F 8±0.3 3±0.3 1±0.3 - 3.1±0.3 1±0.3 1.15±0.3 1000 AH 104F 10±0.3 4±0.3 1±0.3 - 2.5±0.3 1±0.3 1±0.3 2000 AH 104N 10±0.3 4±0.3 1±0.3 - 3±0.3 0.8±0.3 1.5±0.3 2000 AH 086M 8±0.3 6±0.3 1±0.3 - 1.8±0.2 1±0.3 - 1000 Unit：mm ■PARTS NUMBER Applications Part number External dimensions（L×W×T）［mm］ Center frequency［MHｚ］ GPS AH 316M157501 3.2×1.6×0.5 1575 AF 216M245001 2.5×1.6×1.6 2450 W-LAN（2.4GHｚ） AH 212M245001 2.0×1.25×0.85 2450 Bluetooth® AH 316M245001 3.2×1.6×0.5 2450 WiMAX（2.5GHｚ） AH 083F245001 8.0×3.0×1.0 2450 ZigBee AH 104F2450S1 10.0×4.0×1.0 2450 AH 104F2650S1 10.0×4.0×1.0 2650 W-LAN（2.4GHｚ/5GHｚ） AH 104N2450D1 10.0×4.0×1.0 2450/5400 UWB & WiMAX（3.5GHz） AH 086M555003 8.0×6.0×1.0 5550 chipantenna_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 20 149

for General Electronic Equipment ■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS Typical characteristics on TAIYO YUDEN evaluation board ●AH 316M157501 Typical characteristics of VSWR Typical characteristics of radiation pattern（@1.575GHz） ●AF 216M245001 H IG PH RO F Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） DRE UCQU ●AH 212M245001 TE SN C Y Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） ●AH 316M245001 Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） ●AH 083F245001 Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） chipantenna_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 150 20

for General Electronic Equipment ■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS Typical characteristics on TAIYO YUDEN evaluation board ●AH 104F2450S1 Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） ●AH 104N2450D1 H IG PH Typical characteristics of VSWR（2GHz band） Typical characteristics of radiation pattern（@2.45GHz） RO F DRE UQ CU TE SN C Y Typical characteristics of VSWR（5GHz band） Typical characteristics of radiation pattern（@5.25GHz） ●AH 086M555003 Typical characteristics of VSWR Typical characteristics of radiation pattern（@3.96GHz） chipantenna_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 20 151

CHIP ANTENNAS ■PACKAGING ①Minimum Quantity Standard Quantity (pcs) Type Embossed Tape AF216M, AH104F, AH104N 2000 AH316M 3000 AH083F, AH086M 1000 AH212M 4000 ②Tape Material ●Embossed Tape Top tape Chip Filled Sprocket hole Base tape Chip cavity Chip ③Taping Dimensions ●Embossed Tape φ1.5＋0.1/－0 1.75±0.1 Sprockethole (φ0.059＋0.004/-0) (0.069±0.004） A D C B F 4.0±0.1 (0.157±0.004) 2.0±0.1 (0.079±0.004) Chip Cavity Tape Widthness Insertion Pitch Tape Thickness max. Type A B C D F K T 1.85±0.2 2.75±0.2 8±0.2 3.5±0.1 4±0.1 1.95 0.3 AF216M （0.073±0.008） （0.108±0.008） （0.315±0.008） （0.138±0.004） （0.157±0.004） （0.077） （0.012） 1.9±0.2 3.5±0.2 8±0.2 3.5±0.1 4±0.1 0.85 0.3 AH316M （0.075±0.008） （0.138±0.008） （0.315±0.008） （0.138±0.004） （0.157±0.004） （0.033） （0.012） 3.35±0.2 8.35±0.2 16±0.3 7.5±0.1 8±0.1 1.55 0.3 AH083F （0.132±0.008） （0.329±0.008） （0.630±0.012） （0.295±0.004） （0.315±0.004） （0.061） （0.012） AH104F, 4.35±0.2 10.35±0.2 24±0.3 11.5±0.1 8±0.1 1.55 0.3 AH104N （0.171±0.008） （0.407±0.008） （0.945±0.012） （0.435±0.004） （0.315±0.004） （0.061） （0.012） 6.25±0.2 8.26±0.2 16±0.3 7.5±0.1 12±0.1 1.3 0.3 AH086M （0.246±0.008） （0.325±0.008） （0.630±0.012） （0.296±0.004） （0.473±0.004） （0.051） （0.012） 1.5±0.2 2.3±0.2 8±0.3 3.5±0.1 4±0.1 1.5 0.3 AH212M （0.059±0.008） （0.091±0.008） （0.315±0.012） （0.138±0.004） （0.157±0.004） （0.059） （0.012） Unit：mm （inch） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_pack_e-E05R01

④Leader and Blank Portion ⑤Reel size Type A B W T AF216M, AH212M 178±2.0 50 min. 10.0±1.5 3.0 max. AH316M （7.0±0.08） （2.0 min.） （0.394±0.06） （0.12 max.） 178±2.0 50 min. 17.0±1.0 2.5 max. AH083F （7.0±0.08） （2.0 min.） （0.67±0.04） （0.1 max.） AH104F 330±2.0 100±1.0 25.5±1.0 3.0 max. AH104N （13.0±0.08） （3.94±0.04） （1.0±0.04） （0.12 max.） 330±2.0 100±1.0 17.0±1.0 2.5 max. AH086M （13.0±0.08） （3.94±0.04） （0.67±0.04） （0.1 max.） Unit：mm（inch） ⑥Top Tape Strength The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_pack_e-E05R01

CHIP ANTENNAS ■RELIABILITY DATA 1. Operating Temperature Range Specified Value －40～＋85℃ 2. Storage Temperature Range Specified Value －40～＋85℃ Test Methods and ※with being taped, －20～＋40℃ Remarks 3. Solderability Specified Value At least 90% of immersed terminal surface is covered by new solder. Solder temperature : 230±5℃ Test Methods and Duration : 3±1 sec. Remarks Preconditioning : Preheating at 150℃ after immersion into flux. 4. Thermal Shock Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery after 10 times of 30min.immersion alternately at －40℃ and 85℃ of temperature, followed by evaluating electrical Remarks characteristics. 5. High Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical Remarks characteristics. 6. Low Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with －40℃ of temperature, followed by evaluating electrical Remarks characteristics. 7. Humidity Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90～95% relative humidity followed by Remarks evaluating electrical characteristics. 8. Resistance to Reflow Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics. Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_reli_e-E04R01

CHIP ANTENNAS ■PRECAUTIONS 1. PCB Design ◆Land pattern design Precautions Please do not arrange the surface and inside layer pattern near the antenna mounting area. ◆Land pattern design Land pattern dimension examples and recommended antenna land pattern AF216M AH316M Dimensions Type L P A AF216M 2.5 1.5 3 AH212M 2 1 3 Unit：mm AH083F AH104F Technical Considerations AH104N AH086M 2. Soldering ◆Conditions of Reflow soldering (for reference) ・ Pb Free Reflow Profile ・ Reflow profile 300 Peak 260℃ Max. Within 10sec. ） ℃ 200 e（ Slow CoTnseicdhenraictaiol ns peratur cooling ※ tCoo 1m3p0o℃ne nftrso ms hsoouldlde rbineg ptreemhpeeartaetdu rteo. within 100 m 100 e ※ Assured to be reflow soldering for 2 times. T Preheating150℃ Heating above Note : The above profiles are the maximum allowable 60sec. Min. 230℃ soldering condition, therefore these 0 40sec. Max. profiles are not always recommended. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_prec_e-E05R01

3. Storage Conditions ◆Storage conditions 1. The Products should not be used in the following environments : ・ exposure to special gases such as (C12, NH3, SOx, NOx) ・ exposure to volatile gas or inflammable gas ・ exposure to a lot of dust ・ exposure to water or condensation Precautions ・ exposure to direct sunlight or freezing 2. The Products should be kept in the following conditions : ・ Temperature : －10～＋40℃ ・ Humidity : 70％RH max. 3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage. ■ Please contact our offices for further details of specifications. All of the standard values listed here are subject to change without notice due to technical improvements. Therefore, please check the specifications carefully before use. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_prec_e-E05R01

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T aiyo Yuden: AF216M245001-T AH083F245001-T AH086M555003-T AH104F2450S1-T AH104F2650S1-T AH104N2450D1-T AH212M245001-T AH316M157501-T AH316M245001-T