[ For General Electronic Equipment Notice for TAIYO YUDEN Products (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or use of our products. Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or equipment incorporating our products, which are caused under the conditions other than those specified in this catalog or individual product specification sheets. ■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification sheets are available. ■ Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our products. ■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone exchange, and base station). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment). *Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment. When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary. Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. ■ Information contained in this catalog is intended to convey examples of typical performances and/or applications of our products and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights. ■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in accordance with such agreement. ■ The contents of this catalog are applicable to our products which are purchased from our sales offices or authorized distributors (hereinafter“ TAIYO YUDEN’s official sales channel”). Please note that the contents of this catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales channel. ■ Caution for Export Some of our products listed in this catalog may require specific procedures for export according to“ U.S. Export Administration Regulations”,“ Foreign Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. 18

CHIP ANTENNAS CHIP ANTENNAS REFLOW REFLOW ■PARTS NUMBER A F △ 2 1 6 M 2 4 5 0 0 1 - T △＝Blank space ① ② ③ ④ ⑤ ⑥ ⑦ ①Series name ④Special code Code Series name Code Special code AH Multilayer antenna F Inverted F AF Helical antenna M Mono pole N Mono pole（Dual） ②Electrode code Code Electrode code ⑤Frequency △ With plating Code Frequency［MHz］ （example） ③Dimensions（case size） 1575 1574.397～1576.443 Code Dimensions（case size）［mm］ 2450 2400～2500 212 2.0×1.25 5550 3100～8000 H 216 2.5×1.6 1.Describe Center Frequency IG 316 3.2×1.6 2.Lower Frequency for Dual band H 083 8.0×3.0 F 104 10.0×4.0 ⑥Spec code R 086 8.0×6.0 Code Spec code EQ 01～ U S1～ Applicable to AH 104F E N C ⑦Packaging Y Code Packaging P -T Taping R ■ EXTERNAL DIMENSIONS / STANDARD QUANTITY O D U AH 212M type, AF 216M type AH 316M type AH 083F type C L W Directionmark Directionmark FeeLdmark W TS L W T T T b E b E b b c c ba a AH 104F type AH 104N type AH 086M type Directionmark FLeedmark W Directionmark FLeedmark W Directionmark W LFeedmark T T T b ba c c ba b b ba cb cba b ｂ aｂ aｂ Standard quantity［pcs］ Type L W T E a b c Embossed tape AF 216M 2.5±0.2 1.6±0.2 1.6±0.2 0.5±0.3 - - - 2000 AH 212M 2＋0.3/－0.1 1.25±0.2 0.85±0.2 0.5±0.3 - - - 4000 AH 316M 3.2±0.15 1.6±0.15 0.5±0.1 0.5±0.2 - 1.0min. - 3000 AH 083F 8±0.3 3±0.3 1±0.3 - 3.1±0.3 1±0.3 1.15±0.3 1000 AH 104F 10±0.3 4±0.3 1±0.3 - 2.5±0.3 1±0.3 1±0.3 2000 AH 104N 10±0.3 4±0.3 1±0.3 - 3±0.3 0.8±0.3 1.5±0.3 2000 AH 086M 8±0.3 6±0.3 1±0.3 - 1.8±0.2 1±0.3 - 1000 Unit：mm ■PARTS NUMBER Applications Part number External dimensions（L×W×T）［mm］ Center frequency［MHｚ］ GPS AH 316M157501 3.2×1.6×0.5 1575 AF 216M245001 2.5×1.6×1.6 2450 W-LAN（2.4GHｚ） AH 212M245001 2.0×1.25×0.85 2450 Bluetooth® AH 316M245001 3.2×1.6×0.5 2450 WiMAX（2.5GHｚ） AH 083F245001 8.0×3.0×1.0 2450 ZigBee AH 104F2450S1 10.0×4.0×1.0 2450 AH 104F2650S1 10.0×4.0×1.0 2650 W-LAN（2.4GHｚ/5GHｚ） AH 104N2450D1 10.0×4.0×1.0 2450/5400 UWB & WiMAX（3.5GHz） AH 086M555003 8.0×6.0×1.0 5550 chipantenna_e-E05R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 18 165

■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS Typical characteristics on TAIYO YUDEN evaluation board ●AH 316M157501 Typical characteristics of VSWR Typical characteristics of radiation pattern（@1.575GHz） ●AF 216M245001 H IG H F R E Q U E Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） N C ●AH 212M245001 Y P R O D U C T S Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） ●AH 316M245001 Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） ●AH 083F245001 Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） chipantenna_e-E05R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 166 18

■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS Typical characteristics on TAIYO YUDEN evaluation board ●AH 104F2450S1 Typical characteristics of VSWR Typical characteristics of radiation pattern（@2.45GHz） ●AH 104N2450D1 H IG H F R E Q U Typical characteristics of VSWR（2GHz band） Typical characteristics of radiation pattern（@2.45GHz） E N C Y P R O D U C T S Typical characteristics of VSWR（5GHz band） Typical characteristics of radiation pattern（@5.25GHz） ●AH 086M555003 Typical characteristics of VSWR Typical characteristics of radiation pattern（@3.96GHz） chipantenna_e-E05R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 18 167

CHIP ANTENNAS ■PACKAGING ①Minimum Quantity Standard Quantity (pcs) Type Embossed Tape AF216M, AH104F, AH104N 2000 AH316M 3000 AH083F, AH086M 1000 AH212M 4000 ②Tape Material ●Embossed Tape Top tape Chip Filled Sprocket hole Base tape Chip cavity Chip ③Taping Dimensions ●Embossed Tape φ1.5＋0.1/－0 1.75±0.1 Sprockethole (φ0.059＋0.004/-0) (0.069±0.004） A D C B F 4.0±0.1 (0.157±0.004) 2.0±0.1 (0.079±0.004) Chip Cavity Tape Widthness Insertion Pitch Tape Thickness max. Type A B C D F K T 1.85±0.2 2.75±0.2 8±0.2 3.5±0.1 4±0.1 1.95 0.3 AF216M （0.073±0.008） （0.108±0.008） （0.315±0.008） （0.138±0.004） （0.157±0.004） （0.077） （0.012） 1.9±0.2 3.5±0.2 8±0.2 3.5±0.1 4±0.1 0.85 0.3 AH316M （0.075±0.008） （0.138±0.008） （0.315±0.008） （0.138±0.004） （0.157±0.004） （0.033） （0.012） 3.35±0.2 8.35±0.2 16±0.3 7.5±0.1 8±0.1 1.55 0.3 AH083F （0.132±0.008） （0.329±0.008） （0.630±0.012） （0.295±0.004） （0.315±0.004） （0.061） （0.012） AH104F, 4.35±0.2 10.35±0.2 24±0.3 11.5±0.1 8±0.1 1.55 0.3 AH104N （0.171±0.008） （0.407±0.008） （0.945±0.012） （0.435±0.004） （0.315±0.004） （0.061） （0.012） 6.25±0.2 8.26±0.2 16±0.3 7.5±0.1 12±0.1 1.3 0.3 AH086M （0.246±0.008） （0.325±0.008） （0.630±0.012） （0.296±0.004） （0.473±0.004） （0.051） （0.012） 1.5±0.2 2.3±0.2 8±0.3 3.5±0.1 4±0.1 1.5 0.3 AH212M （0.059±0.008） （0.091±0.008） （0.315±0.012） （0.138±0.004） （0.157±0.004） （0.059） （0.012） Unit：mm （inch） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_pack_e-E05R01

④Leader and Blank Portion ⑤Reel size Type A B W T AF216M, AH212M 178±2.0 50 min. 10.0±1.5 3.0 max. AH316M （7.0±0.08） （2.0 min.） （0.394±0.06） （0.12 max.） 178±2.0 50 min. 17.0±1.0 2.5 max. AH083F （7.0±0.08） （2.0 min.） （0.67±0.04） （0.1 max.） AH104F 330±2.0 100±1.0 25.5±1.0 3.0 max. AH104N （13.0±0.08） （3.94±0.04） （1.0±0.04） （0.12 max.） 330±2.0 100±1.0 17.0±1.0 2.5 max. AH086M （13.0±0.08） （3.94±0.04） （0.67±0.04） （0.1 max.） Unit：mm（inch） ⑥Top Tape Strength The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_pack_e-E05R01

CHIP ANTENNAS ■RELIABILITY DATA 1. Operating Temperature Range Specified Value －40～＋85℃ 2. Storage Temperature Range Specified Value －40～＋85℃ Test Methods and ※with being taped, －20～＋40℃ Remarks 3. Solderability Specified Value At least 90% of immersed terminal surface is covered by new solder. Solder temperature : 230±5℃ Test Methods and Duration : 3±1 sec. Remarks Preconditioning : Preheating at 150℃ after immersion into flux. 4. Thermal Shock Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery after 10 times of 30min.immersion alternately at －40℃ and 85℃ of temperature, followed by evaluating electrical Remarks characteristics. 5. High Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical Remarks characteristics. 6. Low Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with －40℃ of temperature, followed by evaluating electrical Remarks characteristics. 7. Humidity Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90～95% relative humidity followed by Remarks evaluating electrical characteristics. 8. Resistance to Reflow Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics. Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_reli_e-E04R01

CHIP ANTENNAS ■PRECAUTIONS 1. PCB Design ◆Land pattern design Precautions Please do not arrange the surface and inside layer pattern near the antenna mounting area. ◆Land pattern design Land pattern dimension examples and recommended antenna land pattern AF216M AH316M Dimensions Type L P A AF216M 2.5 1.5 3 AH212M 2 1 3 Unit：mm AH083F AH104F Technical Considerations AH104N AH086M 2. Soldering ◆Conditions of Reflow soldering (for reference) ・ Pb Free Reflow Profile ・ Reflow profile 300 Peak 260℃ Max. Within 10sec. ） ℃ 200 e（ Slow CoTnseicdhenraictaiol ns peratur cooling ※ tCoo 1m3p0o℃ne nftrso ms hsoouldlde rbineg ptreemhpeeartaetdu rteo. within 100 m 100 e ※ Assured to be reflow soldering for 2 times. T Preheating150℃ Heating above Note : The above profiles are the maximum allowable 60sec. Min. 230℃ soldering condition, therefore these 0 40sec. Max. profiles are not always recommended. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_prec_e-E05R01

3. Storage Conditions ◆Storage conditions 1. The Products should not be used in the following environments : ・ exposure to special gases such as (C12, NH3, SOx, NOx) ・ exposure to volatile gas or inflammable gas ・ exposure to a lot of dust ・ exposure to water or condensation Precautions ・ exposure to direct sunlight or freezing 2. The Products should be kept in the following conditions : ・ Temperature : －10～＋40℃ ・ Humidity : 70％RH max. 3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage. ■ Please contact our offices for further details of specifications. All of the standard values listed here are subject to change without notice due to technical improvements. Therefore, please check the specifications carefully before use. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_prec_e-E05R01

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T aiyo Yuden: AF216M245001-T AH083F245001-T AH086M555003-T AH104F2450S1-T AH104F2650S1-T AH104N2450D1-T AH212M245001-T AH316M157501-T AH316M245001-T