High sensitivity, 100 mW Nominal operating power, GN RELAYS (AGN) 2 Form C and 1 A Slim body type relays FEATURES TYPICAL APPLICATIONS 1.Slim compact size 1.Telephonic equipment 10.6 (L) × 5.7 (W) × 9.0 (H) mm 2.Telecommunications equipment .417 (L) × .224 (W) × .354 (H) inch 3.Security equipment 2.High sensitivity single side stable 4.Test and Measurement equipment type (Nominal operating power: 5.Electronic Consumer and Audio 100mW) is available Visual equipment 3.Outstanding surge resistance 1,500 V 10×160 μs (FCC part 68) (open contacts) 2,500 V 2×10 μs (Telcordia) (contact RoHS compliant and coil) 4.The use of twin crossbar contacts ensures high contact reliability AgPd contact is used because of its good sulfide resistance. Adopting low- gas molding material. Coil assembly molding technology which avoids generating volatile gas from coil. ORDERING INFORMATION AGN 2 0 Contact arrangement 2: 2 Form C Operating function 0: Single side stable 1: 1 coil latching 6: High sensitivity single side stable type Type of operation 0: Standard type (B.B.M.) Terminal shape Nil:Standard PC board terminal A: Surface-mountterminal A type S: Surface-mountterminal S type Nominal coil voltage (DC) 1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V 12: 12V 24: 24V Packing style Nil:Tube packing X: Tape and reel packing (picked from 1/2/3/4 pin side) Z: Tape and reel packing (picked from 5/6/7/8 pin side) –1– ASCTB13E 201407-T

GN (AGN) TYPES 1. Standard PC board terminal Single side stable 1 coil latching High sensitivity single side stable Nominal coil voltage Part No. Part No. Part No. 1.5 V DC AGN2001H AGN2101H AGN2601H 3 V DC AGN20003 AGN21003 AGN26003 4.5 V DC AGN2004H AGN2104H AGN2604H 6 V DC AGN20006 AGN21006 AGN26006 9 V DC AGN20009 AGN21009 AGN26009 12 V DC AGN20012 AGN21012 AGN26012 24 V DC AGN20024 AGN21024 AGN26024 Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2. Surface-mount terminal 1) Tube packing Single side stable 1 coil latching High sensitivity single side stable Nominal coil voltage Part No. Part No. Part No. 1.5 V DC AGN200(cid:2)1H AGN210(cid:2)1H AGN260(cid:2)1H 3 V DC AGN200(cid:2)03 AGN210(cid:2)03 AGN260(cid:2)03 4.5 V DC AGN200(cid:2)4H AGN210(cid:2)4H AGN260(cid:2)4H 6 V DC AGN200(cid:2)06 AGN210(cid:2)06 AGN260(cid:2)06 9 V DC AGN200(cid:2)09 AGN210(cid:2)09 AGN260(cid:2)09 12 V DC AGN200(cid:2)12 AGN210(cid:2)12 AGN260(cid:2)12 24 V DC AGN200(cid:2)24 AGN210(cid:2)24 AGN260(cid:2)24 (cid:2): For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Single side stable 1 coil latching High sensitivity single side stable Nominal coil voltage Part No. Part No. Part No. 1.5 V DC AGN200(cid:2)1HZ AGN210(cid:2)1HZ AGN260(cid:2)1HZ 3 V DC AGN200(cid:2)03Z AGN210(cid:2)03Z AGN260(cid:2)03Z 4.5 V DC AGN200(cid:2)4HZ AGN210(cid:2)4HZ AGN260(cid:2)4HZ 6 V DC AGN200(cid:2)06Z AGN210(cid:2)06Z AGN260(cid:2)06Z 9 V DC AGN200(cid:2)09Z AGN210(cid:2)09Z AGN260(cid:2)09Z 12 V DC AGN200(cid:2)12Z AGN210(cid:2)12Z AGN260(cid:2)12Z 24 V DC AGN200(cid:2)24Z AGN210(cid:2)24Z AGN260(cid:2)24Z (cid:2): For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes:1.Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2.Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed. RATING 1. Coil data 1) Single side stable type Nominal operating Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating Max. applied voltage voltage (at 20°C 68°F) (at 20°C 68°F) [±10%] c(autr r2e0n°tC 68°F) [±10%] (at 20°C 68°F) power (at 20°C 68°F) 1.5 V DC 93.8 mA 16 Ω 3 V DC 46.7 mA 64.2 Ω 4.5 V DC 31 mA 145 Ω 150%V of 6 V DC 75%V or less of 10%V or more of 23.3 mA 257 Ω 140 mW nominal voltage nominal voltage* nominal voltage* 9 V DC (Initial) (Initial) 15.5 mA 579 Ω 12 V DC 11.7 mA 1,028 Ω 24 V DC 9.6 mA 2,504 Ω 230 mW 120%V of nominal voltage 2) 1 coil latching type Nominal operating Nominal coil Set voltage Reset voltage Coil resistance Nominal operating Max. applied voltage voltage (at 20°C 68°F) (at 20°C 68°F) [±10%] c(autr r2e0n°tC 68°F) [±10%] (at 20°C 68°F) power (at 20°C 68°F) 1.5 V DC 66.7 mA 22.5 Ω 3 V DC 33.3 mA 90 Ω 46. 5 VV DDCC n7o5m%inVa ol rv oleltsasg oef* n7o5m%inVa ol rv oleltsasg oef* 2126..27 mmAA 230620. 5 ΩΩ 100 mW 150%V of nominal voltage 9 V DC (Initial) (Initial) 11.1 mA 810 Ω 12 V DC 8.3 mA 1,440 Ω 24 V DC 5.0 mA 4,800 Ω 120 mW *Pulse drive (JIS C 5442-1996) –2– ASCTB13E 201407-T

GN (AGN) 3) High sensitivity single side stable type Nominal operating Nominal coil Set voltage Reset voltage Coil resistance Nominal operating Max. applied voltage voltage (at 20°C 68°F) (at 20°C 68°F) [±10%] c(autr r2e0n°tC 68°F) [±10%] (at 20°C 68°F) power (at 20°C 68°F) 1.5 V DC 66.7 mA 22.5 Ω 3 V DC 33.3 mA 90 Ω 4.5 V DC 22.2 mA 202.5 Ω 150%V of 6 V DC 80%V or less of 10%V or more of 16.7 mA 360 Ω 100 mW nominal voltage nominal voltage* nominal voltage* 9 V DC (Initial) (Initial) 11.1 mA 810 Ω 12 V DC 8.3 mA 1,440 Ω 24 V DC 5.0 mA 4,800 Ω 120 mW 120%V of nominal voltage *Pulse drive (JIS C 5442-1996) 2. Specifications Characteristics Item Specifications Arrangement 2 Form C Contact Initial contact resistance, max. Max. 100 mΩ (By voltage drop 6 V DC 1A) Contact material Stationary contact: AgPd+Au clad Movable contact: AgPd Nominal switching capacity 1 A 30 V DC, 0.3 A 125 V AC (resistive load) Max. switching power 30 W (DC), 37.5 V A (AC) (resistive load) Max. switching voltage 110 V DC, 125 V AC Max. switching current 1 A Rating Min. switching capacity (Reference value)*1 10μA 10 mV DC Single side stable 140mW (1.5 to 12 V DC), 230mW (24 V DC) Nominal operating High sensitivity single side power stable type 100mW (1.5 to 12 V DC), 120mW (24 V DC) 1 coil latching Min. 1,000MΩ (at 500V DC) Insulation resistance (Initial) Measurement at same location as “Initial breakdown voltage” section. Between open contacts 750 Vrms for 1min. (Detection current: 10mA) Breakdown voltage Between contact and coil 1,500 Vrms for 1min. (Detection current: 10mA) (Initial) Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA) Electrical Surge breakdown Between open contacts 1,500 V (10×160μs) (FCC Part 68) characteristics voltage (Initial) Between contacts and coil 2,500 V (2×10μs) (Telcordia) Temperature rise (at 20°C 68°F) Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Operate time [Set time] (at 20°C 68°F) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Release time [Reset time] (at 20°C 68°F) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Functional Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10μs.) Shock resistance Mechanical Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) characteristics Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.) Vibration resistance Destructive 10 to 55 Hz at double amplitude of 5 mm Mechanical Min. 5 × 107 (at 180 cpm) Expected life Electrical Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 cpm) Ambient temperature: (Single side stable, 1 coil latching type) –40°C to +85°C –40°F to +185°F Conditions Conditions for operation, transport and storage*2 (High sensitivity single side stable type) –40°C to +70°C –40°F to +158°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Max. operating speed (at rated load) 20 cpm Unit weight Approx. 1 g .035 oz Notes:*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES. REFERENCE DATA 1. Max. switching capacity 2. Life curve 3. Mechanical life Tested sample: AGN2004H, 15 pcs. Operating speed: 180 cpm 100 4 DC resistive load 40 3.5 Pick-up voltage Switching current, A10..03 AC resistive load ×No. of operations, 1 53420000 DC 30V resistive load Voltage, V 21..3525 Drop-out voltage MMMaainxx... Min. 10 AreCs is1t2iv5eV load 1 0.5 0 0 30 100 0.2 0.4 0.6 0.8 1.0 1.2 0 10 30 50 Contact voltage, V Switching current, A No. of operations, ×104 –3– ASCTB13E 201407-T

GN (AGN) 4. Electrical life (1A 30V DC resistive load) 5. Coil temperature rise Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, AGN20024, 6 pcs. Operating speed: 20 cpm Point measured: Inside the coil Change of pick-up and drop-out voltage Change of contact resistance Ambient temperature: Room temperature %V 100 100 N.C. contact 70 4.5V DC type ge, 90 Ω 90 N.O. contact 60 24V DC type against the rated volta 4687500000 DPriocpk--uopu tv vooltlataggee MMMaainxx... Contact resistance, m 4687500000 XX °Temperature rise, C 543000 1100 AAAA o 30 30 20 Rati 20 Min. 20 10 10 10 0 0 0 0 5 10 0 5 10 100 110 120 130 140 150 No. of operations, ×104 No. of operations, ×104 Coil applied voltage, % 6-(1). Operate and release time (without diode) 6-(2). Operate and release time (with diode) 7. Ambient temperature characteristics Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, 6 pcs. Tested sample: AGN2004H, 6 pcs. 3 3 50 Operate and release time, ms 21..5251 MMMMaaiinnxx.... ROepleeraastee ttiimmee Operate and release time, ms 21..5251 MMMMaaiinnxx.... ROepleeraastee ttiimmee -40Dvorlot-ap2g-0oeuPvtoicl0tka-guRate of change, %Vep 24321--210000000A4m0bien6t 0temp8e0rxxatu1re0,0 °C -30 0.5 0.5 -40 0 0 -50 80 90 100 110 120 80 90 100 110 120 Coil applied voltage, %V Coil applied voltage, %V 8. Malfunctional shock 9-(1). Influence of adjacent mounting 9-(2). Influence of adjacent mounting Tested sample: AGN2004H Tested sample: AGN20012, 6 pcs. Tested sample: AGN20012, 6 pcs. 1YY,Z0'0'0XmZ/s2XX'1,000m/s2Y DEneeerngeizr1ge,i0dzZ0 ec0dmo n/csdo2intidointion Rate of change, %V 1-0550 Pick-up voltage ON ON Rate of change, %V 1-5500 Pick-up voltage OONN -10 ON -10 ON V 10 V 10 1,000Zm'/s2 Y1',000m/s2 1,0X00'm/s2 Rate of change, % -505 Drop-out voltage OFOFFFOFF Rate of change, % -055 Drop-out voltage OOFFFF -10 -10 OFF 0 2 4 6 8 10 12 0 2 4 6 8 10 12 .079.157.236.315.394.472 .079.157.236.315.394.472 Inter-relay distance , mminch Inter-relay distance , mminch DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. PC board terminal CAD Data External dimensions PC board pattern Schematic (Bottom view) Standard type Single side stable 1 coil latching 10.60±0.3 5.70±0.3 7.60 .417±.012 .224±.012 .299 High sensitivity 3.20 single side stable .126 3.20 .126 (0.50) 9.00±0.3 1 2 3 4 1 2 3 4 (.020) .354±.012 3.50±0.3 2.20 .001.460±.±000.14 2.20±0.15.138±.012 0.0.2150±±0.0.104 0.0.8353 ddiiaa.. .087 8 7 6 5 8 7 6 5 ((1.0.5509)) 3.1.2206.±±00.80.710±56.006 3.1.2206±±0.0.1056 Tolerance: ±0.1 ±.004 Direction indication Direction indication (Deenergized condition) (Reset condition) –4– ASCTB13E 201407-T

GN (AGN) 2. Surface-mount terminal CAD Data External dimensions Suggested mounting pad (Tolerance: ±0.1 ±.004) Type Single side stable/1 coil latching/High sensitivity single side stable Single side stable/1 coil latching/High sensitivity single side stable 10.60±0.3 5.70±0.3 .417±.012 .224±.012 3.20 2.20 .126 .087 A type 0.0.2150±±0.0.104 ((0.0.5200))9.3.0504±±0.0.312 Max. 10.3.0904 3.1.1202 5.30 .209 0.40±0.1 3.20±0.15 .016±.004 2.20±0.15 .126±.006 .087±.006 0.80 ((1.0.5509)) 3.1.2206±±0.0.1056 .72.9410±±.00.132 .031 10.60±0.3 5.70±0.3 .417±.012 .224±.012 3.20 2.20 .126 .087 S type 0.0.2150±±0.0.104 ((0.0.5200))9.3.0504±±0.0.312Max. 10.3.0904 2.0.2859 4.45 .175 3.20±0.15 .001.460±.±000.14 2.0.2807±±0.0.1056 .126±.006 0.0.8301 (1.50) 3.20±0.15 5.70±0.3 (.059) .126±.006 .224±.012 Schematic (Top view) Single side stable 1 coil latching High sensitivity single side stable 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 Direction indication Direction indication (Deenergized condition) (Reset condition) NOTES 1. Packing style (S type) 2. Automatic insertion 1) The relay is packed in a tube with the (1)-2 Tape dimensions To maintain the internal function of the relay orientation mark on the left side, as relay, the chucking pressure should not Relay polarity bar shown in the figure below. (Z type) 1.0.5509+ + 000.0.104ddiaia..2.0.0709 4.1.0507 2.0.07 9d idai1..a0..7659 1.402.710.0±0..±4100060.28 eCxhcuecekdin tgh ep rveaslsuuerse b ine lothwe. direction A: Orientation (indicates PIN No.1)stripe 1.14151.53.0102.944.050±.±001.32 4.9 N {500gf} or less .437 Chucking pressure in the direction B: GN relays .1663.000 .62.438 9.8 N {1 kgf} or less Tape coming out direction Chucking pressure in the direction C: General tolerance ±0.1 mm.004 inch Stopper (green) Stopper (red) 9.8 N {1 kgf} or less (2) Dimensions of plastic peel 2) Tape and reel packing mm inch A C B (A type) (1)-1 Tape dimensions mm inch 2.0 .079 .00.1460 R(Ze tlaypy ep)olarity bar 1.0.5509+ + 000.0.104ddiaia.. .41.2.050.707090 .1415.350.10.6795 .51132 ddiiaa.. 2.812 d7i ad.ia. 8031 d84i0.a9 .d6i1a .dia. Please chuck the portion. 11.10 .2944.50±0.±001.23 3.150 dia. Avoid chucking the center of the relay. .437 In addition, excessive chucking pressure 2.00 dia. .1402.17±0.±000.82 GN relays .079 dia. .1663.000 .83.1050 to the pinpoint of the relay should be Tape coming out direction avoided. General tolerance ±0.1 mm.004 inch For general cautions for use, please refer to the “Cautions for use of Signal Relays” or “General Application Guidelines”. –5– ASCTB13E 201407-T

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: P anasonic: AGN200A03 AGN200A4H AGN2004H AGN200A12 AGN20012 AGN20024 AGN200S03 AGN20003 AGN21003 AGN200S4H AGN210A4H AGN2104H AGN21012 AGN200A24 AGN200S12 AGN200S24 AGN210A03 AGN260A4HZ