Dual-Channel Digital Isolators, Enhanced System-Level ESD Reliability Enhanced Product ADuM3210-EP/ADuM3211-EP FEATURES GENERAL DESCRIPTION Enhanced system-level ESD performance per IEC 61000-4-x The ADuM3210-EP/ADuM3211-EP1 are dual-channel digital High temperature operation: 125°C isolators based on Analog Devices, Inc., iCoupler® technology. Narrow body, RoHS-compliant, 8-lead SOIC Combining high speed CMOS and monolithic transformer Low power operation technology, this isolation component provides outstanding 5 V operation performance characteristics superior to alternatives such as 1.7 mA per channel maximum at 0 Mbps to 1 Mbps optocoupler devices. 4.1 mA per channel maximum at 10 Mbps The ADuM3210-EP/ADuM3211-EP isolators provide two 8.4 mA per channel maximum at 25 Mbps independent isolation channels in two channel configurations 3.3 V operation with data rates up to 25 Mbps (see the Ordering Guide). They 1.5 mA per channel maximum at 0 Mbps to 1 Mbps operate with 3.3 V or 5 V supply voltages on either side, 2.6 mA per channel maximum at 10 Mbps providing compatibility with lower voltage systems, as well as 5.2 mA per channel maximum at 25 Mbps enabling voltage translation functionality across the isolation Precise timing characteristics barrier. The ADuM3210-EP/ADuM3211-EP isolators have a High common-mode transient immunity: >25 kV/µs default output low characteristic in comparison to the Safety and regulatory approvals (pending) ADuM3200/ADuM3201 models, which have a default output high UL recognition: 2500 V rms for 1 minute per UL 1577 characteristic. CSA Component Acceptance Notice #5A VDE certificate of conformity In comparison to the ADuM1200-EP isolator, the DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 ADuM3210-EP/ADuM3211-EP isolators contain various V = 560 V peak circuit and layout changes providing increased capability relative IORM to system-level IEC 61000-4-x testing (ESD, burst, and surge). The ENHANCED FEATURES precise capability in these tests for either the ADuM1200-EP or Supports defense and aerospace applications (AQEC standard) ADuM3210-EP/ADuM3211-EP products is strongly determined Military temperature range: −55°C to +125°C by the design and layout of the user’s board or module. For more Controlled manufacturing baseline information, see the AN-793 Application Note, ESD/Latch-Up Enhanced product change notification Considerations with iCoupler Isolation Products. Qualification data available on request Refer to the ADuM3210/ADuM3211 data sheet for additional APPLICATIONS application and technical information. Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Gate drive interfaces FUNCTIONAL BLOCK DIAGRAMS ADuM3210-EP ADuM3211-EP VDD1 1 8 VDD2 VDD1 1 8 VDD2 VIA 2 ENCODE DECODE 7 VOA VOA 2 DECODE ENCODE 7 VIA VIB 3 ENCODE DECODE 6 VOB VIB 3 ENCODE DECODE 6 VOB GND1 4 5 GND2 13094-001 GND1 4 5 GND2 13094-017 Figure 1. ADuM3210-EP Functional Block Diagram Figure 2. ADuM3211-EP Functional Block Diagram 1 Protected by U.S. Patents 5,952,849; 6,873,065; and 7,075,239. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Tel: 781.329.4700 ©2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Technical Support www.analog.com

ADuM3210-EP/ADuM3211-EP Enhanced Product TABLE OF CONTENTS Features .............................................................................................. 1 Regulatory Information ................................................................7 Enhanced Features ............................................................................ 1 Insulation and Safety-Related Specifications .............................7 Applications ....................................................................................... 1 Insulation Characteristics (DIN V VDE V 0884-10 General Description ......................................................................... 1 (VDE V 0884-10):2006-12) ..........................................................8 Functional Block Diagrams ............................................................. 1 Recommended Operating Conditions .......................................8 Revision History ............................................................................... 2 Absolute Maximum Ratings ............................................................9 Specifications ..................................................................................... 3 ESD Caution...................................................................................9 Electrical Characteristics—5 V, 125°C Operation ....................... 3 Pin Configurations and Function Descriptions ......................... 10 Electrical Characteristics—3.3 V, 125°C Operation .................... 4 Truth Tables................................................................................. 10 Electrical Characteristics—Mixed 5 V/3.3 V, 125°C Operation ... 5 Typical Performance Characteristics ........................................... 11 Electrical Characteristics—Mixed 3.3 V/5 V, 125°C Operation ... 6 Outline Dimensions ....................................................................... 12 Package Characteristics ................................................................ 7 Ordering Guide .......................................................................... 12 REVISION HISTORY 10/15—Rev. 0 to Rev. A Changes to Table 3 ............................................................................ 3 Changes to Table 6 ............................................................................ 4 Changes to Table 9 ............................................................................ 5 Changes to Table 12 .......................................................................... 6 5/15—Revision 0: Initial Version Rev. A | Page 2 of 12

Enhanced Product ADuM3210-EP/ADuM3211-EP SPECIFICATIONS ELECTRICAL CHARACTERISTICS—5 V, 125°C OPERATION All typical specifications are at T = 25°C, V = V = 5 V. Minimum/maximum specifications apply over the entire recommended A DD1 DD2 operation range: 4.5 V ≤ V ≤ 5.5 V, 4.5 V ≤ V ≤ 5.5 V, and −55°C ≤ T ≤ +125°C, unless otherwise noted. Switching specifications DD1 DD2 A are tested with C = 15 pF and CMOS signal levels, unless otherwise noted. L Table 1. Parameter Symbol Min Typ Max Unit Test Conditions/Comments SWITCHING SPECIFICATIONS Data Rate 25 Mbps Within PWD limit Propagation Delay t , t 20 50 ns 50% input to 50% output PHL PLH Pulse Width Distortion PWD 3 ns |t − t | PLH PHL Change vs. Temperature 5 ps/°C Pulse Width PW 40 ns Within PWD limit Propagation Delay Skew t 18 ns Between any two units PSK Channel Matching Codirectional t 3 ns PSKCD Opposing Directional t 18 ns PSKOD Output Rise/Fall Time t /t 2.5 ns 10% to 90% R F Table 2. 1 Mbps 10 Mbps 25 Mbps Parameter Symbol Min Typ Max Min Typ Max Min Typ Max Unit SUPPLY CURRENT ADuM3210-EP I 1.3 1.7 3.5 4.8 7.6 9.9 mA DD1 I 1.0 1.6 2.0 2.8 3.8 5.1 mA DD2 ADuM3211-EP I 1.1 1.5 3.0 4.0 6.4 8.7 mA DD1 I 1.3 1.8 3.1 4.1 6.1 8.0 mA DD2 Table 3. For All Models Parameter Symbol Min Typ Max Unit Test Conditions/Comments DC SPECIFICATIONS Logic High Input Threshold V 0.7 V V IH DDx Logic Low Input Threshold V 0.3 V V IL DDx Logic High Output Voltages V V − 0.1 V V I = −20 µA, V = V OH DDx DDx Ox Ix IxH V − 0.5 V − 0.2 V I = −3.2 mA, V = V DDx DDx Ox Ix IxH Logic Low Output Voltages V 0.0 0.1 V I = 20 µA, V = V OL Ox Ix IxL 0.2 0.4 V I = 3.2 mA, V = V Ox Ix IxL Input Current per Channel I −10 +0.01 +10 µA 0 V ≤ V ≤ V I Ix DDx Supply Current per Channel Quiescent Input Supply Current I 0.4 0.8 mA DDI(Q) Quiescent Output Supply Current I 0.4 0.8 mA DDO(Q) Dynamic Input Supply Current I 0.19 mA/Mbps DDI(D) Dynamic Output Supply Current I 0.05 mA/Mbps DDO(D) AC SPECIFICATIONS Common-Mode Transient Immunity1 |CM| 25 35 kV/µs V = V , V = 1000 V, Ix DDx CM transient magnitude = 800 V Refresh Rate f 1.2 Mbps r 1 |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. A | Page 3 of 12

ADuM3210-EP/ADuM3211-EP Enhanced Product ELECTRICAL CHARACTERISTICS—3.3 V, 125°C OPERATION All typical specifications are at T = 25°C, V = V = 3.3 V. Minimum/maximum specifications apply over the entire recommended A DD1 DD2 operation range: 3.0 V ≤ V ≤ 3.6 V, 3.0 V ≤ V ≤ 3.6 V, and −55°C ≤ T ≤ +125°C, unless otherwise noted. Switching specifications DD1 DD2 A are tested with C = 15 pF and CMOS signal levels, unless otherwise noted. L Table 4. Parameter Symbol Min Typ Max Unit Test Conditions/Comments SWITCHING SPECIFICATIONS Data Rate 25 Mbps Within PWD limit Propagation Delay t , t 20 60 ns 50% input to 50% output PHL PLH Pulse Width Distortion PWD 4 ns |t − t | PLH PHL Change vs. Temperature 5 ps/°C Pulse Width PW 40 ns Within PWD limit Propagation Delay Skew t 22 ns Between any two units PSK Channel Matching Codirectional t 3 ns PSKCD Opposing Directional t 20 ns PSKOD Output Rise/Fall Time t /t 3.0 ns 10% to 90% R F Table 5. 1 Mbps 10 Mbps 25 Mbps Parameter Symbol Min Typ Max Min Typ Max Min Typ Max Unit SUPPLY CURRENT ADuM3210-EP I 0.8 1.3 2.1 3.2 4.6 6.1 mA DD1 I 0.7 1.0 1.3 1.9 2.4 3.4 mA DD2 ADuM3211-EP I 0.7 1.3 1.8 2.6 3.8 5.4 mA DD1 I 0.8 1.6 1.9 2.5 3.7 5.0 mA DD2 Table 6. For All Models Parameter Symbol Min Typ Max Unit Test Conditions/Comments DC SPECIFICATIONS Logic High Input Threshold V 0.7 V V IH DDx Logic Low Input Threshold V 0.3 V V IL DDx Logic High Output Voltages V V − 0.1 V V I = −20 µA, V = V OH DDx DDx Ox Ix IxH V − 0.5 V − 0.2 V I = −3.2 mA, V = V DDx DDx Ox Ix IxH Logic Low Output Voltages V 0.0 0.1 V I = 20 µA, V = V OL Ox Ix IxL 0.2 0.4 V I = 3.2 mA, V = V Ox Ix IxL Input Current per Channel I −10 +0.01 +10 µA 0 V ≤ V ≤ V I Ix DDx Supply Current per Channel Quiescent Input Supply Current I 0.3 0.5 mA DDI(Q) Quiescent Output Supply Current I 0.3 0.5 mA DDO(Q) Dynamic Input Supply Current I 0.10 mA/Mbps DDI(D) Dynamic Output Supply Current I 0.03 mA/Mbps DDO(D) AC SPECIFICATIONS Common-Mode Transient Immunity1 |CM| 25 35 kV/µs V = V , V = 1000 V, Ix DDx CM transient magnitude = 800 V Refresh Rate f 1.1 Mbps r 1 |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. A | Page 4 of 12

Enhanced Product ADuM3210-EP/ADuM3211-EP ELECTRICAL CHARACTERISTICS—MIXED 5 V/3.3 V, 125°C OPERATION All typical specifications are at T = 25°C, V = 5 V, V = 3.3 V. Minimum/maximum specifications apply over the entire recommended A DD1 DD2 operation range: 4.5 V ≤ V ≤ 5.5 V, 3.0 V ≤ V ≤ 3.6 V, and −55°C ≤ T ≤ +125°C, unless otherwise noted. Switching specifications DD1 DD2 A are tested with C = 15 pF and CMOS signal levels, unless otherwise noted. L Table 7. Parameter Symbol Min Typ Max Unit Test Conditions/Comments SWITCHING SPECIFICATIONS Data Rate 25 Mbps Within PWD limit Propagation Delay t , t 15 55 ns 50% input to 50% output PHL PLH Pulse Width Distortion PWD 3 ns |t − t | PLH PHL Change vs. Temperature 5 ps/°C Pulse Width PW 40 ns Within PWD limit Propagation Delay Skew t 22 ns Between any two units PSK Channel Matching Codirectional t 3 ns PSKCD Opposing Directional t 20 ns PSKOD Output Rise/Fall Time t /t 3.0 ns 10% to 90% R F Table 8. 1 Mbps 10 Mbps 25 Mbps Parameter Symbol Min Typ Max Min Typ Max Min Typ Max Unit SUPPLY CURRENT ADuM3210-EP I 1.3 1.7 3.5 4.8 7.6 9.9 mA DD1 I 0.7 1.0 1.3 1.9 2.4 3.4 mA DD2 ADuM3211-EP I 1.1 1.5 2.9 4.0 6.4 8.7 mA DD1 I 0.8 1.6 1.9 2.5 3.7 5.0 mA DD2 Table 9. For All Models Parameter Symbol Min Typ Max Unit Test Conditions/Comments DC SPECIFICATIONS Logic High Input Threshold V 0.7 V V IH DDx Logic Low Input Threshold V 0.3 V V IL DDx Logic High Output Voltages V V − 0.1 V V I = −20 µA, V = V OH DDx DDx Ox Ix IxH V − 0.5 V − 0.2 V I = −3.2 mA, V = V DDx DDx Ox Ix IxH Logic Low Output Voltages V 0.0 0.1 V I = 20 µA, V = V OL Ox Ix IxL 0.2 0.4 V I = 3.2 mA, V = V Ox Ix IxL Input Current per Channel I −10 +0.01 +10 µA 0 V ≤ V ≤ V I Ix DDx Supply Current per Channel Quiescent Input Supply Current I 0.4 0.8 mA DDI(Q) Quiescent Output Supply Current I 0.3 0.5 mA DDO(Q) Dynamic Input Supply Current I 0.19 mA/Mbps DDI(D) Dynamic Output Supply Current I 0.03 mA/Mbps DDO(D) AC SPECIFICATIONS Common-Mode Transient Immunity1 |CM| 25 35 kV/µs V = V , V = 1000 V, Ix DDx CM transient magnitude = 800 V Refresh Rate f 1.2 Mbps r 1 |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. A | Page 5 of 12

ADuM3210-EP/ADuM3211-EP Enhanced Product ELECTRICAL CHARACTERISTICS—MIXED 3.3 V/5 V, 125°C OPERATION All typical specifications are at T = 25°C, V = 3.3 V, V = 5.0 V. Minimum/maximum specifications apply over the entire recommended A DD1 DD2 operation range: 3.0 V ≤ V ≤ 3.6 V, 4.5 V ≤ V ≤ 5.5 V, and −55°C ≤ T ≤ +125°C, unless otherwise noted. Switching specifications DD1 DD2 A are tested with C = 15 pF and CMOS signal levels, unless otherwise noted. L Table 10. Parameter Symbol Min Typ Max Unit Test Conditions/Comments SWITCHING SPECIFICATIONS Data Rate 25 Mbps Within PWD limit Propagation Delay t , t 15 55 ns 50% input to 50% output PHL PLH Pulse Width Distortion PWD 4 ns |t − t | PLH PHL Change vs. Temperature 5 ps/°C Pulse Width PW 40 ns Within PWD limit Propagation Delay Skew t 22 ns Between any two units PSK Channel Matching Codirectional t 3 ns PSKCD Opposing Directional t 20 ns PSKOD Output Rise/Fall Time t /t 2.5 ns 10% to 90% R F Table 11. 1 Mbps 10 Mbps 25 Mbps Parameter Symbol Min Typ Max Min Typ Max Min Typ Max Unit SUPPLY CURRENT ADuM3210-EP I 0.8 1.3 2.1 3.2 4.6 6.1 mA DD1 I 1.0 1.6 2.0 2.8 3.7 5.1 mA DD2 ADuM3211-EP I 0.7 1.3 1.8 2.6 3.8 5.4 mA DD1 I 1.3 1.8 3.1 4.1 6.1 8.0 mA DD2 Table 12. For All Models Parameter Symbol Min Typ Max Unit Test Conditions/Comments DC SPECIFICATIONS Logic High Input Threshold V 0.7 V V IH DDx Logic Low Input Threshold V 0.3 V V IL DDx Logic High Output Voltages V V − 0.1 V V I = −20 µA, V = V OH DDx DDx Ox Ix IxH V − 0.5 V − 0.2 V I = −3.2 mA, V = V DDx DDx Ox Ix IxH Logic Low Output Voltages V 0.0 0.1 V I = 20 µA, V = V OL Ox Ix IxL 0.2 0.4 V I = 3.2 mA, V = V Ox Ix IxL Input Current per Channel I −10 +0.01 +10 µA 0 V ≤ V ≤ V I Ix DDx Supply Current per Channel Quiescent Input Supply Current I 0.4 0.8 mA DDI(Q) Quiescent Output Supply Current I 0.5 0.8 mA DDO(Q) Dynamic Input Supply Current I 0.10 mA/Mbps DDI(D) Dynamic Output Supply Current I 0.05 mA/Mbps DDO(D) AC SPECIFICATIONS Common-Mode Transient Immunity1 |CM| 25 35 kV/µs V = V , V = 1000 V, Ix DDx CM transient magnitude = 800 V Refresh Rate f 1.1 Mbps r 1 |CM| is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. Rev. A | Page 6 of 12

Enhanced Product ADuM3210-EP/ADuM3211-EP PACKAGE CHARACTERISTICS Table 13. Parameter Symbol Min Typ Max Unit Test Conditions/Comments Resistance (Input-to-Output)1 R 1012 Ω I-O Capacitance (Input-to-Output)1 C 1.0 pF f = 1 MHz I-O Input Capacitance C 4.0 pF I IC Junction-to-Case Thermal Resistance, Side 1 θ 46 °C/W Thermocouple located at center JCI of package underside IC Junction-to-Case Thermal Resistance, Side 2 θ 41 °C/W JCO 1 The device is considered a 2-terminal device; Pin 1 through Pin 4 are shorted together, and Pin 5 through Pin 8 are shorted together. REGULATORY INFORMATION The ADuM3210-EP/ADuM3211-EP are pending approval by the organizations listed in Table 14. Table 14. UL (Pending) CSA (Pending) VDE (Pending) Recognized under UL 1577 Approved under CSA Component Acceptance Notice #5A Certified according to DIN V VDE V 0884-10 component recognition program1 (VDE V 0884-10):2006-122 Single/basic 2500 V rms Basic insulation per CSA 60950-1-03 and IEC 60950-1, Reinforced insulation, 560 V peak isolation voltage 400 V rms (566 V peak) maximum working voltage Functional insulation per CSA 60950-1-03 and IEC 60950-1, 800 V rms (1131 V peak) maximum working voltage File E214100 File 205078 File 2471900-4880-0001 1 In accordance with UL 1577, each ADuM3210-EP/ADuM3211-EP is proof tested by applying an insulation test voltage ≥ 3000 V rms for 1 sec. 2 In accordance with DIN V VDE V 0884-10 (VDE V 0884-10):2006-12, each ADuM3210-EP/ADuM3211-EP is proof tested by applying an insulation test voltage ≥ 1050 V peak for 1 sec (partial discharge detection limit = 5 pC). The asterisk (*) marking branded on the component designates DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 approval. INSULATION AND SAFETY-RELATED SPECIFICATIONS Table 15. Parameter Symbol Value Unit Test Conditions/Comments Rated Dielectric Insulation Voltage 2500 V rms 1-minute duration Minimum External Air Gap (Clearance) L(I01) 4.0 mm min Measured from input terminals to output terminals, shortest distance through air, in the plane of the PCB Minimum External Tracking (Creepage) L(I02) 4.0 mm min Measured from input terminals to output terminals, shortest distance path along body Minimum Internal Distance (Internal Clearance) 0.017 min mm min Insulation distance through insulation Tracking Resistance (Comparative Tracking Index) CTI >400 V DIN IEC 112/VDE 0303, Part 1 Isolation Group II Material Group (DIN VDE 0110, 1/89, Table 1) Rev. A | Page 7 of 12

ADuM3210-EP/ADuM3211-EP Enhanced Product INSULATION CHARACTERISTICS (DIN V VDE V 0884-10 (VDE V 0884-10):2006-12) These isolators are suitable for reinforced isolation only within the safety limit data. Maintenance of the safety data is ensured by protective circuits. The asterisk (*) marking branded on the component designates DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 approval for a 560 V peak working voltage. Table 16. Description Test Conditions/Comments Symbol Characteristic Unit Installation Classification per DIN VDE 0110 For Rated Mains Voltage ≤ 150 V rms I to IV For Rated Mains Voltage ≤ 300 V rms I to III For Rated Mains Voltage ≤ 400 V rms I to II Climatic Classification 40/125/21 Pollution Degree per DIN VDE 0110, Table 1 2 Maximum Working Insulation Voltage V 560 V peak IORM Input-to-Output Test Voltage, Method B1 V × 1.875 = V , 100% production test, t = 1 sec, V 1050 V peak IORM PR m PR partial discharge < 5 pC Input-to-Output Test Voltage, Method A After Environmental Tests Subgroup 1 V × 1.6 = V , t = 60 sec, partial discharge < 5 pC V 896 V peak IORM PR m PR After Input and/or Safety Tests V × 1.2 = V , t = 60 sec, partial discharge < 5 pC V 672 V peak IORM PR m PR Subgroup 2 and Subgroup 3 Highest Allowable Overvoltage Transient overvoltage, t = 10 sec V 4000 V peak TR TR Surge Isolation Voltage VPEAK = 10 kV, 1.2 µs rise time, 50 µs, 50% fall time VIOSM 4000 V peak Safety-Limiting Values Maximum value allowed in the event of a failure (see Figure 3) Case Temperature T 150 °C S Total Power Dissipation at 25°C PS 1.56 W Insulation Resistance at T V = 500 V R >109 Ω S IO S 200 RECOMMENDED OPERATING CONDITIONS 180 Table 17. A) 160 m Parameter Symbol Rating T ( 140 EN SIDE 1 SIDE 2 Operating Temperature TA −55°C to +125°C RR 120 Supply Voltages1 V , V 3 V to 5.5 V U DD1 DD2 C G 100 Maximum Input Signal Rise and 1 ms N MITI 80 Fall Times LI Start-Up Current IDD1, IDD2 20 mA ETY- 60 1 All voltages are relative to their respective ground. F 40 A S 20 00 50CASE TEMP1E0R0ATURE (°C)150 200 13094-002 Figure 3. Thermal Derating Curve, Dependence of Safety-Limiting Values on Case Temperature per DIN V VDE V 0884-10 Rev. A | Page 8 of 12

Enhanced Product ADuM3210-EP/ADuM3211-EP ABSOLUTE MAXIMUM RATINGS T = 25°C, unless otherwise noted. A Table 19. Maximum Continuous Working Voltage Parameter Max Unit Constraint Table 18. AC Voltage, Bipolar 565 V peak 50-year minimum Parameter Rating Waveform lifetime Storage Temperature (T ) −55°C to +150°C ST AC Voltage, Unipolar Ambient Operating Temperature (T ) −55°C to +125°C A Waveform Supply Voltages (V , V )1 −0.5 V to +7.0 V DD1 DD2 Functional Insulation 1131 V peak Maximum approved Input Voltage (VIA, VIB)1, 2 −0.5 V to VDDI + 0.5 V working voltage per Output Voltage (VOA, VOB)1, 2 −0.5 V to VDDO + 0.5 V IEC 60950-1 Average Output Current per Pin (IO)3 −22 mA to +22 mA Basic Insulation 560 V peak Maximum approved Common-Mode Transients −100 kV/µs to +100 kV/µs working voltage per (CM , CM)4 IEC 60950-1 and H L VDE V 0884-10 1 Each voltage is relative to its respective ground. DC Voltage 2 VDDI and VDDO refer to the supply voltages on the input and output sides of a given channel, respectively. Functional Insulation 1131 V peak Maximum approved 3 See Figure 3 for maximum allowable current values for various temperatures. working voltage per 4 Refers to common-mode transients across the insulation barrier. Common- IEC 60950-1 mode transients exceeding the absolute maximum rating can cause latch-up or permanent damage. Basic Insulation 560 V peak Maximum approved working voltage per Stresses at or above those listed under Absolute Maximum IEC 60950-1 and Ratings may cause permanent damage to the product. This is a VDE V 0884-10 stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational ESD CAUTION section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. Rev. A | Page 9 of 12

ADuM3210-EP/ADuM3211-EP Enhanced Product PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS VDD1 1 8 VDD2 VDD1 1 8 VDD2 VIA 2 ADuM3210-EP 7 VOA VOA 2 ADuM3211-EP 7 VIA GNVDIB1 34 (NToOt Pto V SIEcaWle) 65 VGONBD2 13094-003 GNVDIB1 34 (NToOt Pto V SIEcaWle) 65 VGONBD2 13094-016 Figure 4. ADuM3210-EP Pin Configuration Figure 5. ADuM3211-EP Pin Configuration Table 20. ADuM3210-EP Pin Function Descriptions Table 21. ADuM3211-EP Pin Function Descriptions Pin No. Mnemonic Description Pin No. Mnemonic Description 1 V Supply Voltage for Isolator Side 1, 1 V Supply Voltage for Isolator Side 1, DD1 DD1 3.0 V to 5.5 V. 3.0 V to 5.5 V. 2 V Logic Input A. 2 V Logic Output A. IA OA 3 V Logic Input B. 3 V Logic Input B. IB IB 4 GND Ground 1. Ground reference for 4 GND Ground 1. Ground reference for 1 1 Isolator Side 1. Isolator Side 1. 5 GND Ground 2. Ground reference for 5 GND Ground 2. Ground reference for 2 2 Isolator Side 2. Isolator Side 2. 6 V Logic Output B. 6 V Logic Output B. OB OB 7 V Logic Output A. 7 V Logic Input A. OA IA 8 V Supply Voltage for Isolator Side 2, 8 V Supply Voltage for Isolator Side 2, DD2 DD2 3.0 V to 5.5 V. 3.0 V to 5.5 V. TRUTH TABLES Table 22. ADuM3210-EP Truth Table (Positive Logic) V Input1 V Input1 V State V State V Output1 V Output1 Notes IA IB DD1 DD2 OA OB H H Powered Powered H H L L Powered Powered L L H L Powered Powered H L L H Powered Powered L H X X Unpowered Powered L L Outputs return to the input state within 1 μs of V power restoration DDI X X Powered Unpowered Indeterminate Indeterminate Outputs return to the input state within 1 μs of V power restoration DDO 1 H is logic high, L is logic low, and X is don’t care. Table 23. ADuM3211-EP Truth Table (Positive Logic) V Input1 V Input1 V State V State V Output1 V Output1 Notes IA IB DD1 DD2 OA OB H H Powered Powered H H L L Powered Powered L L H L Powered Powered H L L H Powered Powered L H X X Unpowered Powered Indeterminate L Outputs return to the input state within 1 μs of V power restoration DDI X X Powered Unpowered L Indeterminate Outputs return to the input state within 1 μs of V power restoration DDO 1 H is logic high, L is logic low, and X is don’t care. Rev. A | Page 10 of 12

Enhanced Product ADuM3210-EP/ADuM3211-EP TYPICAL PERFORMANCE CHARACTERISTICS 10 20 8 15 A) m NEL ( 6 mA) HAN NT ( 10 RENT/C 4 CURRE 5.0V R 5.0V U 5 C 2 3.3V 3.3V 00 10DATA RATE (Mbps)20 30 13094-004 00 10DATA RATE (Mbps)20 30 13094-007 Figure 6. Typical Input Supply Current per Channel vs. Data Rate Figure 9. ADuM3210-EP Typical IDD1 Supply Current vs. Data Rate for 5.0 V and 3.3 V Operation for 5.0 V and 3.3 V Operation 4 4 3 3 A) m NEL ( mA) 5.0V RRENT/CHAN 2 5.0V CURRENT ( 2 3.3V U 1 1 C 3.3V 00 10DATA RATE (Mbps)20 30 13094-005 00 10DATA RATE (Mbps)20 30 13094-008 Figure 7. Typical Output Supply Current per Channel vs. Data Rate Figure 10. ADuM3210-EP Typical IDD2 Supply Current vs. Data Rate for 5.0 V and 3.3 V Operation (No Output Load) for 5.0 V and 3.3 V Operation 4 10 8 3 A) m NEL ( mA) 6 T/CHAN 2 5.0V RRENT ( 4 REN CU 5.0V R U 1 C 3.3V 2 3.3V 00 10DATA RATE (Mbps)20 30 13094-006 00 10DATA RATE (Mbps)20 30 13094-015 Figure 8. Typical Output Supply Current per Channel vs. Data Rate Figure 11. ADuM3211-EP Typical IDD1 or IDD2 Supply Current vs. Data Rate for 5.0 V and 3.3 V Operation (15 pF Output Load) for 5.0 V and 3.3 V Operation Rev. A | Page 11 of 12

ADuM3210-EP/ADuM3211-EP Enhanced Product OUTLINE DIMENSIONS 5.00(0.1968) 4.80(0.1890) 8 5 4.00(0.1574) 6.20(0.2441) 3.80(0.1497) 1 4 5.80(0.2284) 1.27(0.0500) 0.50(0.0196) BSC 1.75(0.0688) 0.25(0.0099) 45° 0.25(0.0098) 1.35(0.0532) 8° 0.10(0.0040) 0° COPLANARITY 0.51(0.0201) 0.10 SEATING 0.31(0.0122) 0.25(0.0098) 10..2470((00..00510507)) PLANE 0.17(0.0067) COMPLIANTTOJEDECSTANDARDSMS-012-AA C(RINOEFNPEATRRREOENNLCLTEIHNEOGSNDELISYM)AEANNRDSEIAORRNOESUNANORDETEDAIN-POMPFRIFLOLMPIMIRLELIATIMTEEERTFSEO;RIRNECUQHSUEDIVIINMAELDENENSSTIIOGSNNFS.OR 012407-A Figure 12. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) ORDERING GUIDE Number Number Maximum Maximum Maximum of Inputs, of Inputs, Data Rate Propagation Pulse Width Temperature Package Package Model1 V Side V Side (Mbps) Delay, 5 V (ns) Distortion (ns) Range Description Option2 DD1 DD2 ADuM3210TRZ-EP 2 0 25 50 3 −55°C to +125°C 8-Lead SOIC_N R-8 ADuM3210TRZ-EP-RL7 2 0 25 50 3 −55°C to +125°C 8-Lead SOIC_N R-8 ADuM3211TRZ-EP 1 1 25 50 4 −55°C to +125°C 8-Lead SOIC_N R-8 ADuM3211TRZ-EP-RL7 1 1 25 50 4 −55°C to +125°C 8-Lead SOIC_N R-8 1 Z = RoHS Compliant Part. 2 R-8 means 8-lead, narrow body SOIC_N. ©2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D13094-0-10/15(A) Rev. A | Page 12 of 12

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A nalog Devices Inc.: ADUM3211ARZ ADUM3211BRZ-RL7 ADUM3211TRZ ADUM3210ARZ ADUM3210BRZ-RL7 ADUM3210ARZ-RL7 ADUM3211TRZ-RL7 ADUM3210TRZ ADUM3210BRZ ADUM3211ARZ-RL7 ADUM3210TRZ-RL7 ADUM3211BRZ ADUM3210TRZ-EP ADUM3210TRZ-EP-RL7 ADUM3211TRZ-EP ADUM3211TRZ-EP-RL7 ADUM3210WBRZ ADUM3211WARZ-RL7 ADUM3210WARZ ADUM3210WBRZ-RL7 ADUM3211WBRZ-RL7 ADUM3210WCRZ ADUM3211WARZ ADUM3210WCRZ-RL7 ADUM3211WCRZ ADUM3211WCRZ-RL7 ADUM3210WARZ-RL7 ADUM3211WBRZ