E M C C o m p o n e n t s Common mode filters Cl Pb Br For high-speed differential signal line, general differential signal line ACM series RoHS SRVEHCA-CFrHee HaFlroegeen LFereaed ACM2012 type FEATURES Downsized wound type chip common mode filter that maintains required common mode filter characteristics. 　Impedance for common mode noise can clear 1500 [100MHz], and has excellent EMC suppression. Differential mode impedance is suppressed, so there is virtually no affect on high speed signals. Operating temperature range: –40 to +85°C APPLICATION Common mode noise countermeasure for high-speed differential signals where influence to the signal is a concern. USB line for PCs and peripheral devices. IEEE1394 lines and ETHERNET lines for PCs, STBs, etc. LCD panel LVDS and Panel Link lines. PART NUMBER CONSTRUCTION ACM 2012 - 900 - 2P - T 002 L×W×H dimensions Impedance Series name Number of lines Packaging style Internal code 2.0×1.2×1.3 mm () at 100MHz CHARACTERISTICS SPECIFICATION TABLE Impedance DC resistance Rated voltage Rated current Part No. [100MHz］ [per 1 line] ()min. ()typ. ()max. (V)max. (A)max. 65 90 0.19 50 0.4 ACM2012-900-2P-T002 90 120 0.22 50 0.37 ACM2012-121-2P-T002 150 200 0.25 50 0.35 ACM2012-201-2P-T002 270 360 0.5 50 0.22 ACM2012-361-2P-T002 1500 2000 2.5 50 0.15 ACM2012-202-2P-T002 Measurement equipment Measurement item Product No. Manufacturer Common mode impedance 4991A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012_en.fm

E M C C o m p o n e n t s ACM2012 type IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 202 Common mode 121 Common mode 1000 201 Common mode Ω) (ce 361 Common mode n 100 a d e p m I 202 Differential mode 900 Common mode 10 121 Differential mode 201 Differential mode 361 Differential mode 900 Differential mode 1 1 10 100 1000 Frequency (MHz) Measurement equipment Product No. Manufacturer 4991A Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012_en.fm

E M C C o m p o n e n t s ACM2012 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 2.0±0.2 1 4 2.0±0.5 2 typ. 1.2±0.2 2 3 0 1.2±0.1 0.8 60+1/– 0.4 1.2 1.0 ø13.0±0.2 9+1/–0 0.5 ø21.0±0.8 13±1 0.3 ø180±3 0.05 Dimensions in mm Dimensions in mm TAPE DIMENSIONS RECOMMENDED LAND PATTERN 1 1 Sprocket 0. 0. 0.25±0.05 hole 1.5+00.1 2.0±0.1 4.0±0.1 1.75± 3.5± 0.4 1.2 2 0. ± 1.1 B 8.0 2.6 K A 4.0±0.1 Cavity Dimensions in mm Dimensions in mm CIRCUIT DIAGRAM Type A B K 1 4 ACM2012 1.4±0.1 2.25±0.1 1.4±0.1 2 3 500 to 560min. (cid:129) No polarity 160min. Taping 440min. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural Drawing direction cooling Peak Dimensions in mm 245°C PACKAGE QUANTITY e 230°C 230°C atur Package quantity 2000 pcs/reel er p m e 180°C T TEMPERATURE RANGE, INDIVIDUAL WEIGHT 5s 150°C Operating Storage Individual temperature range temperature range weight 60 to 120s 10 to 30s –40 to +85 °C –40 to +85 °C 10 mg The storage temperature range is for after the assembly. Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012_en.fm

E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment　　 (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro- tection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181011 cmf_commercial_signal_acm2012_en.fm