3-teminal Filters For power line ACH series Type: ACH32C [1206 inch]* ACH3218 [1207 inch] ACH4518 [1807 inch] * Dimensions Code [EIA] Issue date: September 2011 • All specifications are subject to change without notice. (cid:127) Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

(1/6) 3-terminal Filters Conformity to RoHS Directive For Power Line ACH Series ACH32C FEATURES PRODUCT IDENTIFICATION (cid:127) These T-type EMC filters comprise ferrite beads and chip ACH 32C - 103 - T capacitors and are engineered to handle high current levels. (1) (2) (3) (4) (5) (cid:127) The series offers even greater attenuation characteristics when used in a stable circuit on the ground. (1)Series name (cid:127) The ACH series is ideal for high-density circuit design, since the (2)Dimensions series is vertically mounted and does not require much mounting 32C: 3216 type(3.2×1.6mm) space. (3)Capacitance (cid:127) Because guarantee temperature range is –40 to +125°C, it is 103: 10000pF possible to use in strict environmental condition. (4)Packaging style (cid:127) Available for reflow soldering. T: ø180mm reel taping (5) TDK internal code APPLICATIONS Home electronic equipment, (TVs, VCRs, CD players, DAT players, TEMPERATURE RANGES electric musical instruments, PCs, etc.), office automation equip- Operating –40 to +125°C ment (computers, terminals, stand-alone word processors, fax Storage(After mount) –40 to +125°C machines, etc.), factory automation equipment (robots, numerical control devices, process controllers, etc.), automotive electronics PACKAGING STYLE AND QUANTITIES (car navigation, ECU, etc.) Packaging style Reel Quantity Taping ø180mm 2000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM RECOMMENDED SOLDERING CONDITIONS 3.2±0.2 RECOMMENDED TEMPERATURE PROFILE 3.0 FOR LEAD-FREE SOLDER 2 0. Marking 1 3 Peak 245˚C max. Natural ±6 cooling 1. 230˚C GND 2 2 180˚C ±10. 1 3 No polarity 150˚C 2. 2 1 60 to 120s 10 to 30s 0.45 1.7 0. Ferrite Time(s) GND terminal 7 0. Terminal REFLOW PROFILE FOR SOLDER HEAT RESISTANCE electrode Dimensions in mm Peak 260˚C max. Natural cooling RECOMMENDED PC BOARD PATTERN 230˚C REFLOW SOLDERING 180˚C 4.2 1.0 0.6 1.0 150˚C 60 to 120s 40s max. 6 5 2. 0. Time(s) Land pattern Dimensions in mm (cid:127) Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (cid:127) Please contact our Sales office when your application is considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) (cid:127) All specifications are subject to change without notice. 001-03 / 20110928 / e9611_ach

(2/6) ELECTRICAL CHARACTERISTICS Guaranteed Guaranteed frequency Rated voltage Rated current Insulation resistance DC resistance Part No. attenuation bandwidth Edc(V)max. (A)max. (MΩ)min. (mΩ)max. (dB) (MHz) ACH32C-100-T001 50 6 100 2 –15 2000 to 6000 ACH32C-220-T001 50 6 100 2 –15 1300 to 2500 ACH32C-470-T001 50 6 100 2 –15 650 to 2500 ACH32C-101-T001 50 6 100 2 –20 450 to 1300 ACH32C-331-T001 50 6 100 2 –20 200 to 800 ACH32C-102-T001 50 6 100 2 –25 100 to 350 ACH32C-222-T001 50 6 100 2 –25 55 to 300 ACH32C-103-T001 50 6 100 2 –25 30 to 200 ACH32C-333-T001 50 6 100 2 –25 10 to 300 ACH32C-104-T001 50 6 100 2 –25 3.5 to 200 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS (Glass epoxy coated double side mounting PCB) 0 0 102 –10 –10 222 )B–20 103 )B–20 (nd–30 (nd–30 333 o o uati–40 104 uati–40 en–50 en–50 Att–60 Att–60 –70 –70 –80 –80 1 10 100 1000 10000 1 10 100 1000 10000 Frequency(MHz) Frequency(MHz) 0 0 331 100 –10 –10 ()ndB––3200 ()ndB––3200 242700 o o ati–40 ati–40 101 u u n–50 n–50 e e Att–60 Att–60 –70 –70 –80 –80 1 10 100 1000 10000 1 10 100 1000 10000 Frequency(MHz) Frequency(MHz) CIRCUIT DIAGRAM S.G. ACH-C Series L.M. 50Ω Ω 0 5 (cid:127) All specifications are subject to change without notice. 001-03 / 20110928 / e9611_ach

(3/6) 3-terminal Filters Conformity to RoHS Directive For Power Line ACH Series ACH3218, ACH4518 FEATURES (cid:127) The ACH series consists of products with superior attenuation characteristics, in which the T-type filter circuit is magnetically shielded with ferrite. (cid:127) The series offers even greater attenuation characteristics when used in a stable circuit on the ground. (cid:127) The ACH series is ideal for high-density circuit design, since the series is vertically mounted and does not require much mounting space. (cid:127) Available for reflow soldering. (cid:127) It is a product conforming to RoHS directive. PRODUCT IDENTIFICATION HANDLING AND PRECAUTIONS ACH 3218 - 223 - T D (cid:127) Before soldering, be sure to preheat components. The preheat- (1) (2) (3) (4) (5) ing temperature should be set so that the temperature difference between the solder temperature and product temperature does (1) Series name not exceed 150°C. (2) Dimensions (cid:127) After mounting components onto the printed circuit board, do not (3) Type apply stress through board bending or mishandling. (4) Packaging style (cid:127) The inductance value may change due to magnetic saturation if (5) TDK internal code the current exceeds the rated maximum. (cid:127) Do not expose the inductors to stray magnetic fields. TEMPERATURE RANGES (cid:127) Avoid static electricity discharge during handling. Operating –40 to +125°C (cid:127) When hand soldering, apply the soldering iron to the printed cir- Storage(After mount) –40 to +125°C cuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. PACKAGING STYLE AND QUANTITIES Packaging style Quantity Taping 1000 pieces/reel (cid:127) Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (cid:127) Please contact our Sales office when your application is considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) (cid:127) All specifications are subject to change without notice. 001-03 / 20110928 / e9611_ach

(4/6) ACH3218 TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM RECOMMENDED PC BOARD PATTERN REFLOW SOLDERING 3.2±0.3 Terminal 1 3 5 electrode 2 4 ±0. 1 3 Insulation 1.9 5 resin 2. GND 2 2 0.6 0.45 No polarity Resist 0.6 Land pattern 0.2 Ferrite Dimensions in mm 1.4 2.2 1.4 Dimensions in mm ±8 GND terminal (cid:127) Dimension without tolerance 1. is reference value. ELECTRICAL CHARACTERISTICS Rated Insulation 25dB attenuation Rated DC resistance voltage resistance Part No. frequency range current (Ω)max. Edc (MΩ)min. (MHz) (A)max. [Terminal No.1 to 3] (V)max. [Terminal No.1 to 2/No.2 to 3] ACH3218-223 11 to 55 20 1.5 0.06 1000 ACH3218-103 17 to 60 20 1.5 0.06 1000 ACH3218-682 22 to 75 20 1.5 0.06 1000 ACH3218-472 30 to 85 20 1.5 0.06 1000 ACH3218-332 37 to 90 20 1.5 0.06 1000 ACH3218-222 45 to 105 20 1.5 0.06 1000 ACH3218-152 60 to 115 20 1.5 0.06 1000 ACH3218-102 80 to 140 20 1.5 0.06 1000 ACH3218-681 95 to 150 20 1.5 0.06 1000 ACH3218-471 120 to 180 20 1.5 0.06 1000 ACH3218-331 130 to 210 20 1.5 0.06 1000 ACH3218-221 170 to 250 20 1.5 0.06 1000 ACH3218-151 205 to 280 20 1.5 0.06 1000 ACH3218-101 265 to 340 20 1.5 0.06 1000 ACH3218-680 340 to 420 20 1.5 0.06 1000 ACH3218-470 420 to 500 20 1.5 0.06 1000 ACH3218-330 500 to 600 20 1.5 0.06 1000 ACH3218-220 600 to 700 20 1.5 0.06 1000 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS MEASURING CIRCUIT 0 S.G. ACH Series L.M. 50Ω 10 Ω 0 )B 223 103682472332222102681471331221151101680470330220 5 (nd20 152 o ati u en30 Att 40 50 1 3 10 30 100 300 1000 Frequency(MHz) (cid:127) All specifications are subject to change without notice. 001-03 / 20110928 / e9611_ach

(5/6) ACH4518 TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM RECOMMENDED PC BOARD PATTERN REFLOW SOLDERING 4.5±0.4 Terminal electrode 1 3 3 ±20. 1 3 Irnessuinlation 1.94 3. GND 2 2 1.0 0.45 No polarity Resist 2 Ferrite Dimensions in mm 1.0 Land pattern ±80. GND terminal (cid:127) Dimension without tolerance 1.75 3.5 1.75 Dimensions in mm 1. is reference value. ELECTRICAL CHARACTERISTICS Rated Insulation 25dB attenuation Rated DC resistance voltage resistance Part No. frequency range current (Ω)max. Edc (MΩ)min. (MHz) (A)max. [Terminal No.1 to 3] (V)max. [Terminal No.1 to 2/No.2 to 3] ACH4518-333 6 to 60 50 2.0 0.06 1000 ACH4518-223 9 to 65 50 2.0 0.06 1000 ACH4518-153 11 to 70 50 2.0 0.06 1000 ACH4518-103 15 to 75 50 2.0 0.06 1000 ACH4518-682 20 to 85 50 2.0 0.06 1000 ACH4518-472 25 to 90 50 2.0 0.06 1000 ACH4518-332 35 to 100 50 2.0 0.06 1000 ACH4518-222 40 to 110 50 2.0 0.06 1000 ACH4518-152 50 to 130 50 2.0 0.06 1000 ACH4518-102 65 to 150 50 2.0 0.06 1000 ACH4518-681 75 to 160 50 2.0 0.06 1000 ACH4518-471 95 to 180 50 2.0 0.06 1000 ACH4518-331 115 to 205 50 2.0 0.06 1000 ACH4518-221 150 to 250 50 2.0 0.06 1000 ACH4518-151 190 to 290 50 2.0 0.06 1000 ACH4518-101 235 to 335 50 2.0 0.06 1000 ACH4518-680 290 to 395 50 2.0 0.06 1000 ACH4518-470 360 to 460 50 2.0 0.06 1000 ACH4518-330 450 to 550 50 2.0 0.06 1000 ACH4518-220 530 to 650 50 2.0 0.06 1000 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS MEASURING CIRCUIT 0 S.G. ACH Series L.M. 50Ω 10 Ω 223153103682472332222 102471221151101 470330220 50 ()ndB20 333 152681331 680 o ati30 u n e Att40 50 60 1 3 10 30 100 300 1000 Frequency(MHz) (cid:127) All specifications are subject to change without notice. 001-03 / 20110928 / e9611_ach

(6/6) PACKAGING STYLES REEL DIMENSIONS 1.0 0 2. ± 0 6 ø 2.0±0.5 13.0±0.3 ø13±0.5 17.0±1.4 ø21±0.8 ø178±2.0 Dimensions in mm TAPE DIMENSIONS 1 5 0.3 to 0.4 Shoplreocket 1.5+–00..01 Cavity ±750.±50.0 1. 5. 3 0. ± 0 2. 1 B T A 4.0±0.1 D C Dimensions in mm Type A B C D T 321825 2.2±0.2 3.7±0.2 4.0±0.1 2.0±0.05 3.3max. 451832 2.2±0.2 5.2±0.2 4.0±0.1 2.0±0.05 3.8max. 40 to 80 Taping 200min. Drawing direction 300min. Dimensions in mm (cid:127) All specifications are subject to change without notice. 001-03 / 20110928 / e9611_ach