ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag Precision Thin Film Chip Resistor Array Superior Moisture Resistivity FEATURES • Superior moisture resistivity, |R/R| < 0.5 % (85 °C; 85 % RH; 1000 h) • Rated dissipation P up to 125 mW per 70 resistor • ESD stability 1000 V, human body model • Relative TCR down to ± 5 ppm/K (tracking) • Relative tolerance down to ± 0.05 % (matching) ACAS 0606 AT and ACAS 0612 AT precision automotive • AEC-Q200 qualified grade thin film chip resistor arrays with convex terminations • Material categorization: For definitions of compliance combine the proven reliability of discrete chip resistors with please see www.vishay.com/doc?99912 the advantages of chip resistor arrays. Defined relative tolerance (matching) and relative TCR (tracking) make this APPLICATIONS product perfectly suited for applications with outstanding • Precision analogue circuits requirements towards stable fixed resistor ratios. The ACAS AT is available with equal or different resistor values. Find • Voltage divider out more about Vishay’s automotive grade product • Feedback circuits requirements at: www.vishay.com/applications • Signal conditioning TECHNICAL SPECIFICATIONS DESCRIPTION ACAS 0606 AT ACAS 0612 AT EIA size 0606 0612 Metric size RR1616M RR1632M Configuration, isolated 2 x 0603 4 x 0603 Design: All equal values (AE) AE AE Two pairs of values (TP) TP Different values (DF) DF Resistance values 47  to 150 k (1) Absolute tolerance ± 0.1 % Relative tolerance ± 0.05 % Absolute temperature coefficient 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K Relative temperature coefficient 15 ppm/K; ± 10 ppm/K; ± 5 ppm/K Max. resistance ratio R /R 1:20 min. max. Rated dissipation: P 70 Element 0.125 W 0.125 W Package 0.2 W 0.4 W Operating voltage, U . AC/DC 75 V max Operating temperature range - 55 °C to 155 °C Permissible film temperature 155 °C Insulation voltage (Uins) against ambient and 75 V between integrated resistors, continuous Notes • The relative figures of tolerance, TCR and drift are related to a medial axis between the maximum and minimum permissable deviation of the resistor array. For detailed information please refer to the application note: Increasing Accuracy in Feedback Circuits and Voltage Dividers with Thin Film Chip Resistor Arrays (www.vishay.com/doc?28194) (1) Resistance values to be selected from E24; E192. Revision: 12-Apr-13 1 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. MAXIMUM RESISTANCE CHANGE AT RATED POWER (1) DESCRIPTION ACAS 0606 AT ACAS 0612 AT Configuration, isolated 2 x 0603 4 x 0603 Operation mode Standard Power Standard Power Rated power per element, P 0.1 W 0.125 W 0.1 W 0.125 W 70 Rated power per package, P 0.15 W 0.2 W 0.3 W 0.4 W 70 Film temperature 125 °C 155 °C 125 °C 155 °C Max. resistance change at P 70 R/R max., after: 1000 h ± 0.1 % ± 0.25 % ± 0.1 % ± 0.25 % 8000 h ± 0.25 % ± 0.5 % ± 0.25 % ± 0.5 % Max. relative resistance change (relative drift) at P 70 R/R max., after: 1000 h ± 0.05 % ± 0.125 % ± 0.05 % ± 0.125 % 8000 h ± 0.125 % ± 0.25 % ± 0.125 % ± 0.25 % Note (1) Figures are given for arrays with equal values, design type AE. CIRCUITS 4 3 8 7 6 5 R R R R R R 1 2 1 2 3 4 Pin 1 2 Pin 1 2 3 4 ACAS 0606 AT ACAS 0612 AT Marking on ACAS 0606 AT: For types with different resistor values pin 1 is marked. DESIGN ACAS 0606 AT ACAS 0612 AT AE R = R R = R = R = R 1 2 1 2 3 4 TP R = R < R = R 1 4 2 3 DF R < R 1 2 Revision: 12-Apr-13 2 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION Part Number: ACASA1100S2200P5AT A C A S A 1 1 0 0 S 2 2 0 0 P 5 A T MODEL/ ACCURACY TERMINAL SIZE RESISTANCE (1) RESISTANCE (1) PACKAGING Special SIZE GRADE (2) ACA S = Convex N = 0606 3 digit TCR, Tracking, 3 digit P1 AT = square A = 0612 resistance Tolerance and resistance P5 Automotive value R1, R4 Matching value R2, R3 1 digit S, T, or U 1 digit multiplier multiplier MULTIPLIER MULTIPLIER 9 = *10-1 9 = *10-1 0 = *100 0 = *100 1 = *101 1 = *101 2 = *102 2 = *102 3 = *103 3 = *103 Product Description: ACAS 0612 110R S 220R AT P5 ACA S 0612 110R S 220R AT P5 MODEL/ RESISTANCE ACCURACY RESISTANCE TERMINAL SIZE SPECIAL PACKAGING SIZE R , R (1) GRADE (2) R , R (1) 1 4 2 3 ACA = Chip S = Convex 0606 110R = 110  TCR, Tracking, 220R = 220  AT = P1 Array square 0612 1K1 = 1.1 k Tolerance and 1K1 = 1.1 k Automotive P5 22K1 = 22.1 k Matching 22K1 = 22.1 k S, T, or U Notes • Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION. (1) R1 = R4  R2 = R3. (2) For historical temperature coefficient and resistance ranges please refer to the end of the data sheet. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE ABSOLUTE RELATIVE ACCURACY RESISTANCE TYPE GRADE VALUE TCR TOLERANCE TCR TOLERANCE S ± 25 ppm/K ± 0.1 % ± 15 ppm/K ± 0.05 % 47  to 150 k ACAS 0606 AT T ± 15 ppm/K ± 0.1 % ± 10 ppm/K ± 0.05 % 47  to 150 k ACAS 0612 AT U ± 10 ppm/K ± 0.1 % ± 5 ppm/K ± 0.05 % 47  to 100 k Notes • For historical temperature coefficent and resistance range please refer to the end of the data sheet. • Relative TCR (tracking) down to ± 2.5 ppm/K on request. • Relative tolerance for resistance values < 80  on request. Revision: 12-Apr-13 3 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag PACKAGING PACKAGING TYPE CODE QUANTITY WIDTH PITCH REEL DIAMETER STYLE Tape and reel P1 1000 ACAS 0606 AT cardboard tape 8 mm 4 mm 180 mm/7" ACAS 0612 AT acc. IEC 60286-3 P5 5000 Type I DIMENSIONS ACAS 0606 AT ACAS 0612 AT W W A A Pin 4 Pin 3 Pin 8 T2 T2 T1 L T1 L HH H Pin 1 A1 Pin 2 Pin 1 A1 A DIMENSION AND MASS L W H P A A T T MASS TYPE 1 1 2 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mg) ACAS 0606 AT 1.5 ± 0.15 1.6 ± 0.15 0.45 ± 0.1 - 0.6 ± 0.1 0.4 ± 0.1 0.3 ± 0.15 0.4 ± 0.15 3.6 ACAS 0612 AT 1.5 ± 0.15 3.2 ± 0.15 0.45 ± 0.1 0.8 ± 0.1 0.6 ± 0.1 0.4 ± 0.1 0.3 ± 0.15 0.4 ± 0.15 6.8 PATTERN STYLES FOR CHIP RESISTOR ARRAYS I X U I X Y Y Dimensions in mm G Z G Z Pin 1 Pin 1 0.1 P 0.1 limits for solder resist limits for solder resist RECOMMENDED SOLDER PAD DIMENSIONS G Y X U Z I P TYPE (mm) (mm) (mm) (mm) (mm) (mm) (mm) ACAS 0606 AT 0.7 0.7 0.64 - 2.1 0.3 0.8 ACAS 0612 AT 0.7 0.7 0.64 0.5 2.1 0.3 0.8 Revision: 12-Apr-13 4 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag DESCRIPTION The production of the components is strictly controlled and The suitability of conformal coatings, if applied, shall be follows an extensive set of instructions established for qualified by appropriate means to ensure the long-term reproducibility. A homogeneous film of metal alloy is stability of the whole system. The resistors are RoHS deposited on a high grade (Al O ) ceramic substrate using a compliant; the pure tin plating provides compatibility with 2 3 mask to separate the adjacent resistors and conditioned to lead (Pb)-free and lead-containing soldering processes. The achieve the desired temperature coefficient. Specially permitted storage time is 20 years, whereas the solderability designed inner contacts are realized on both sides. A is specified for 2 years after production or requalification. special laser is used to achieve the target value by smoothly The immunity of the plating against tin whisker growth has cutting a meander groove in the resistive layer without been proven under extensive testing. damaging the ceramics. The resistor elements are covered by a protective coating All products comply with the GADSL (1) and the designed for electrical, mechanical and climatic protection. CEFIC-EECA-EICTA (2) list of legal restrictions on The terminations receive a final pure tin on nickel plating. hazardous substances. This includes full compliance with the following directives: The result of the determined production is verified by an extensive testing procedure and optical inspection • 2000/53/EC End of Life Vehicle Directive (ELV) and performed on 100 % of the individual chip resistors. Only Annex II (ELV II) accepted products are laid directly into the paper tape in • 2011/65/EC Restriction of the use of Hazardous accordance with IEC 60286-3 (3). Substances directive (RoHS) • 2002/96/EC Waste Electrical and Electronic Equipment ASSEMBLY Directive (WEEE) The resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic APPROVALS soldering using reflow or vapour phase as shown in The chip resistor array is AEC-Q200 qualified.  IEC 61760-1 (3). The encapsulation is resistant to all Where applicable, the resistors are tested in accordance cleaning solvents commonly used in the electronics with EN 140401-801 which refers to EN 60115-1 and industry, including alcohols, esters and aqueous solutions. EN 140400. Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org. (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org  policy  environmental policy group  chemicals  jig Joint Industry Guide (JIG-101 Ed 2.0). (3) The quoted IEC standards are also released as EN standards with the same number and identical contents. FUNCTIONAL PERFORMANCE % n Power Mode r i Standard Mode e w o 100 P d ate 80 R 60 40 20 0 - 55 0 50 70 100 125 155 180 Ambient Temperature in °C For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER, above Derating Revision: 12-Apr-13 5 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the Lower category temperature, upper category temperature; following specifications: damp heat, long term, 56 days) is valid (LCT = - 55 °C/ EN 60115-1, generic specification UCT = 125 °C). EN 140400, sectional specification Unless otherwise specified the following values apply: EN 140401-801, detail specification Temperature: 15 °C to 35 °C Relative humidity: 45 % to 75 % The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202. Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar) The tests are are carried out under standard atmospheric The requirements stated in the “Test Procedures and conditions according to IEC 60068-1 (1), 5.3. Climatic Requirements” table are based on the required tests and category LCT/UCT/56 (rated temperature range: permitted limits of EN 140401-801 where applicable. TEST PROCEDURES AND REQUIREMENTS IEC EN REQUIREMENTS 60 068-2 (1) 60 115-1 TEST PROCEDURE PERMISSIBLE CHANGE (2) TEST CLAUSE (R) METHOD Stability for product types: ACAS 0606 AT 47  to 150 k ACAS 0612 AT 47  to 150 k 4.5 - Resistance - 0.1 % At (20/- 55/ 20) °C and 4.8.4.2 - Temperature coefficient  25 ppm/K;  15 ppm/K;  10 ppm/K (20/125/20) °C U = P x R 70 or U = U ; max. 1.5 h on; 0.5 h off; whichever is the less severe; Endurance at 70 °C: 1000 h: Standard operation mode Absolute ± (0.1 % R + 0.05) Relative ± (0.05 % R + 0.05) 8000 h: Absolute ± (0.25 % R + 0.05) Relative ± (0.125 % R + 0.05) 4.25.1 - U = P x R 70 or U = U ; max. 1.5 h on; 0.5 h off; whichever is the less severe; Endurance at 70 °C: 1000 h: Power operation mode Absolute ± (0.25 % R + 0.05) Relative ± (0.125 % R + 0.05) 8000 h: Absolute ± (0.5 % R + 0.05) Relative ± (0.25 % R + 0.05) 125 °C; 1000 h: Absolute ± (0.25 % R + 0.05 ) Relative ± (0.125 % R + 0.05 ) 125 °C; 8000 h: Endurance at upper 4.25.3 - Absolute ± (0.5 % R + 0.05 ) category temperature Relative ± (0.25 % R + 0.05 ) 155 °C; 1000 h: ± (0.4 % R + 0.05 ) Absolute ± (0.2 % R + 0.05 ) Relative Damp heat, (40 2)C; 56 days; 4.24 78 (Cab) ± (0.25 % R + 0.05) steady state (93  3) % RH (85 ± 2) °C Damp heat, (85 ± 5) % RH 4.39 67 (Cy) steady state, U = 0.1 x P x R; ± (0.5 % R + 0.05) 70 accelerated U  0.3 x Umax.; 1000 h Revision: 12-Apr-13 6 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS IEC EN REQUIREMENTS 60 068-2 (1) 60 115-1 TEST PROCEDURE PERMISSIBLE CHANGE (2) TEST CLAUSE (R) METHOD Stability for product types: ACAS 0606 AT 47  to 150 k ACAS 0612 AT 47  to 150 k U = 2.5 x P x R or Short time overload (3) 70 ± (0.1 % R + 0.01) 4.13 - U = 2 x U ; Standard operation mode max. no visible damage 5 s IEC 61340-3-1; Electrostatic discharge 3 pos. + 3 neg. 4.40 - ± (0.5 % R + 0.05) (human body model) (3) (equivalent to MIL-STD-883, Method 3015); 1000 V 30 min at - 55 °C and Rapid change of ± (0.25 % R + 0.05) 4.19 14 (Na) 30 min at 125 °C; temperature no visible damage 1000 cycles Reflow method 2 Resistance to soldering (IR/forced gas convection); ± (0.1 % R + 0.01 ) 4.18.2 58 (Td) heat (260 ± 5) C; no visible damage (10  1) s Solder bath method; SnPb; non-activated flux accelerated aging 4 h/155 °C (215 ± 3) °C; (3 ± 0.3) s Good tinning ( 95 % covered); 4.17.2 58 (Td) Solderability Solder bath method; no visible damage SnAgCu; non-activated flux accelerated aging 4 h/155 °C (235 ± 3) °C; (2 ± 0.2) s 4.32 21 (Ue ) Shear (adhesion) 45 N No visible damage 3 ± (0.1 % R + 0.01 ) 4.33 21 (Ue ) Substrate bending Depth 2 mm, 3 times no visible damage; 1 no open circuit in bent position IEC 60695-11-5, 4.35 - Flammability No burning after 30 s needle flame test; 10 s Endurance by sweeping; 10 Hz to 2000 Hz; no resonance; ± (0.1 % R + 0.01 ) 4.22 6 (Fc) Vibration amplitude  1.5 mm or no visible damage  200 m/s2; 7.5 h U = U RMS ins 4.7 - Voltage proof 60 s ± 5 s; against ambient, No flashover or breakdown between adjacent resistors Notes (1) The quoted IEC standards are also released as EN standards with the same number and identical contents. (2) Figures are given for arrays with equal values, design type AE. (3) For a single element. HISTORICAL TEMPERATURE COEFFICIENT AND RESISTANCE RANGES DESCRIPTION RESISTANCE VALUE ACCURACY ABSOLUTE TOLERANCE ACAS 0606 AT ABSOLUTE TCR TCR TRACKING GRADE TOLERANCE MATCHING ACAS 0612 AT A ± 25 ppm/K 10 ppm/K ± 0.25 % 0.1 % 47  to 150 k B ± 25 ppm/K 10 ppm/K ± 0.5 % 0.25 % 47  to 150 k E ± 25 ppm/K 15 ppm/K ± 0.25 % 0.1 % 47  to 150 k F ± 25 ppm/K 15 ppm/K ± 0.5 % 0.25 % 47  to 150 k J ± 25 ppm/K 25 ppm/K ± 0.25 % 0.1 % 47  to 150 k K ± 25 ppm/K 25 ppm/K ± 0.5 % 0.25 % 47  to 150 k N ± 50 ppm/K 25 ppm/K ± 0.5 % 0.5 % 47  to 150 k P ± 50 ppm/K 50 ppm/K ± 0.5 % 0.5 % 47  to 150 k Note • Special temperature coefficent and resistance combinations remain available. For optimized availability please refer to the table TEMPERATURE COEFFICENT AND RESISTANCE. Revision: 12-Apr-13 7 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: ACASA1000E1000P1AT ACASA1000E2000P1AT ACASA1000E3000P1AT ACASA1001E1001P1AT ACASA1001E2001P1AT ACASA1001E3001P1AT ACASA1002E1002P1AT ACASA1002E1502P1AT ACASA1002E2002P1AT ACASA1002E3002P1AT ACASA4701E4701P1AT ACASA4702E4702P1AT ACASN1000E1000P1AT ACASN1000E2000P1AT ACASN1000E3000P1AT ACASN1001E1001P1AT ACASN1001E2001P1AT ACASN1001E3001P1AT ACASN1002E1002P1AT ACASN1002E1502P1AT ACASN1002E2002P1AT ACASN1002E3002P1AT ACASN4701E4701P1AT ACASN4702E4702P1AT ACASA1001E1002P1AT ACASA1001E5001P1AT ACASA1002E5002P1AT ACASA1003E1003P1AT ACASA2001E2001P1AT ACASA2002E2002P1AT ACASA5002E5002P1AT ACASN1001E1002P1AT ACASN1001E5001P1AT ACASN1002E5002P1AT ACASN1003E1003P1AT ACASN2001E2001P1AT ACASN2002E2002P1AT ACASN5002E5002P1AT ACASA1500N1530P5AT ACASN1082N1162P5AT ACASA1002S3002P1AT ACASA1000S1000P1AT ACASN1001S1001P1AT ACASA4702S4702P1AT ACASN1002S1002P1AT ACASA1001S3001P1AT ACASN5001S5001P1AT ACASN1002S5002P1AT ACASN1001S5001P1AT ACASA1002S5002P1AT ACASN1002S3002P1AT ACASN1001S3001P1AT ACASN5002S5002P1AT ACASN1002S2002P1AT ACASA1002S2002P1AT ACASA1003S1003P1AT ACASA1001S2001P1AT ACASN1001S2001P1AT ACASA1001S1001P1AT ACASA1001S1002P1AT ACASA5002S5002P1AT ACASN2002S2002P1AT ACASA1002S1002P1AT ACASA2002S2002P1AT ACASN1000S1000P1AT ACASN2001S2001P1AT ACASA2001S2001P1AT ACASA2002U2002P1AT ACASA1000U1000P1AT ACASA1002U1002P1AT ACASA1003U1003P1AT ACASA1001U1001P1AT ACASN5001U5001P1AT ACASN1001U1001P1AT ACASN1002U1002P1AT ACASN2002U2002P1AT ACASN1000U1000P1AT ACASA5001U5001P1AT ACASA4702B4702P5AT ACASA2401B2401P5AT ACASA1672B8332P5AT ACASA4300S6800P1AT ACASA7151F5112P5AT ACASN5600U5600P1AT ACASN5600S5600P1AT ACASN1001S2002P5AT ACASN2150E8200P1AT ACASA4300U6800P1AT ACASN3001S3001P1AT ACASA1201S1201P1AT ACASN1602S5102P1AT ACASN2402S7502P1AT ACASN1002S1003P1AT ACASA1151S7151P5AT ACASA1002K1203P5AT ACASA1740S1740P1AT ACASN1801S3602P5AT ACASA4701S4701P1AT