ACAS 0612 - Professional www.vishay.com Vishay Beyschlag Professional Thin Film Chip Resistor Array FEATURES • Advanced thin film technology • Two pairs or four equal resistor values • TCR down to ± 25 ppm/K • Tolerance down to ± 0.5 % • Pure Sn termination on Ni barrier layer • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS The ACAS 0612 thin film chip resistor arrays combine the • Voltage divider proven reliability of professional thin film chip resistor • Feedback circuits products with the advantages of chip resistor arrays. A small package enables the design of high density circuits in • Signal conditioning combination with reduction of assembly costs. Four equal resistor values or two pairs are available. TECHNICAL SPECIFICATIONS DESCRIPTION ACAS 0612 EIA size 0612 Metric size RR1632M Configuration, isolated 4 x 0603 Design: All equal AE Two pairs TP Resistance values 47 to221 k (1) Absolute tolerance (2) ±1 %; ± 0.5 % Absolute temperature coefficient (2) ± 50 ppm/K; ± 25 ppm/K Max. resistance ratio R /R 1:10 min. max. Rated dissipation: P 70 Element 0.1 W Package, 4 x 0603 0.3 W Operating voltage 75 V Permissibe film temperature 125°C Operating temperature range - 55°C to 125 °C Insulation voltage (U ) against ambient and between isolated ins 75 V resistors, continuous Notes (1) Resistance values to be selected from E24; E192. (2) For specified TCR tracking, tolerance matching and even tighter absolute tolerance and TCR please refer to data sheet ACAS 0612 - Precision available on our web site at www.vishay.com/doc?28751. Revision: 13-Dec-12 1 Document Number: 28754 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Professional www.vishay.com Vishay Beyschlag APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. CIRCUITS R1 R2 R3 R4 ACAS 0612 DESIGN ACAS 0612 AE R = R = R = R 1 2 3 4 TP R = R < R = R 1 4 2 3 PART NUMBER AND PRODUCT DESCRIPTION Part Number: ACASA110012200P500 A C A S A 1 1 0 0 1 2 2 0 0 P 5 0 0 MODEL/ ACCURACY TERMINAL SIZE RESISTANCE (1) RESISTANCE (1) PACKAGING SPECIAL SIZE GRADE (2) ACA S = Convex A = 0612 3 digit TCR and 3 digit P1 00 = Standard square resistance tolerance resistance P5 value R , R 1 value R , R 1 4 2 3 1 digit 2 1 digit multiplier multiplier 3 MULTIPLIER MULTIPLIER 9 = *10-1 9 = *10-1 0 = *100 0 = *100 1 = *101 1 = *101 2 = *102 2 = *102 3 = *103 3 = *103 Product Description: ACAS 0612 110R1220RP5 ACA S 0612 110R 1 220R P5 RESISTANCE ACCURACY RESISTANCE MODEL/SIZE TERMINATION SIZE PACKAGING R , R (1) GRADE (2) R , R (1) 1 4 2 3 ACA = Chip S = Convex 0612 110R = 110  TCR and 220R = 220 P1 Array square 1K1 = 1.1 k tolerance 1K1 = 1.1 k P5 22K1 = 22.1 k 1 22K1 = 22.1 k 2 3 Notes • Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION. (1) R1 = R4  R2 = R3. (2) Please refer to the table TEMPERATURE COEFFICIENT AND RESISTANCE RANGE, see next page. (3) Please refer to the table PACKAGING, see next page. Revision: 13-Dec-12 2 Document Number: 28754 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Professional www.vishay.com Vishay Beyschlag TEMPERATURE COEFFICIENT AND RESISTANCE RANGE ABSOLUTE RELATIVE ACCURACY RESISTANCE TYPE GRADE VALUE TCR TOLERANCE TCR TOLERANCE 1 ± 25 ppm/K ± 0.5 % - - 47  to 221 k ACAS 0612 2 ± 50 ppm/K ± 0.5 % - - 47  to 221 k 3 ± 50 ppm/K ± 1 % - - 47  to 221 k PACKAGING PACKAGING TYPE CODE QUANTITY WIDTH PITCH REEL DIAMETER STYLE Tape and reel P1 1000 cardboard tape ACAS 0612 8 mm 4 mm 180 mm/7" acc. IEC 60286-3 P5 5000 Type I DIMENSIONS W A T2 T1 L H A1 A DIMENSIONS - Chip resistor array, mass and relevant physical dimensions L W H P A A T T MASS TYPE 1 1 2 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mg) ACAS 0612 1.5 ± 0.15 3.2 ± 0.15 0.45 ± 0.1 0.8 ± 0.1 0.6 ± 0.1 0.4 ± 0.1 0.3 ± 0.15 0.4 ± 0.15 6.6 PATTERN STYLES FOR CHIP RESISTOR ARRAY ACAS 0612 U I X Y Dimensions in mm G Z limits for solder resist P 0.1 RECOMMENDED SOLDER PAD DIMENSIONS FOR CHIP RESISTOR ARRAYS G Y X U Z I P TYPE (mm) (mm) (mm) (mm) (mm) (mm) (mm) ACAS 0612 0.7 0.7 0.64 0.5 2.1 0.3 0.8 Revision: 13-Dec-12 3 Document Number: 28754 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Professional www.vishay.com Vishay Beyschlag DESCRIPTION ASSEMBLY The production of the components is strictly controlled and The resistors are suitable for processing on automatic follows an extensive set of instructions established for SMD assembly systems. They are suitable for automatic reproducibility. A homogeneous film of metal alloy is soldering using reflow or vapour phase as shown in deposited on a high grade (Al O ) ceramic substrate using a IEC 61760-1 (3). The encapsulation is resistant to all 2 3 mask to separate the adjacent resistors and conditioned to cleaning solvents commonly used in the electronics achieve the desired temperature coefficient. Specially industry, including alcohols, esters and aqueous solutions. designed inner contacts are realized on both sides. A The suitability of conformal coatings, if applied, shall be special laser is used to achieve the target value by smoothly qualified by appropriate means to ensure the long-term cutting a meander groove in the resistive layer without stability of the whole system. The resistors are RoHS damaging the ceramics. compliant; the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The The resistor elements are covered by a protective coating permitted storage time is 20 years, whereas the solderability designed for electrical, mechanical and climatic protection. is specified for 2 years after production or requalification. The terminations receive a final pure tin on nickel plating. The immunity of the plating against tin whisker growth has The result of the determined production is verified by an been proven under extensive testing. extensive testing procedure and optical inspection All products comply with the GADSL(1) and the performed on 100 % of the individual chip resistors. Only CEFIC-EECA-EICTA(2) list of legal restrictions on accepted products are laid directly into the paper tape in hazardous substances. This includes full compliance with accordance with IEC 60286-3 (3). the following directives: • 2000/53/EC End of Vehicle life Directive (ELV) and Annex II (ELV II) • 2011/65/EC Restriction of the use of Hazardous Substances directive (RoHS) • 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) TESTS Where applicable, the resistors are tested in accordance with EN140401-801 which refers to EN60115-1 and EN140400. Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org. (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org  policy  environmental policy group  chemicals  jig  Joint Industry Guide (JIG-101 Ed 2.0). (3) The quoted IEC standards are also released as EN standards with the same number and identical contents. Revision: 13-Dec-12 4 Document Number: 28754 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Professional www.vishay.com Vishay Beyschlag FUNCTIONAL PERFORMANCE % n r i e w o 100 P d ate 80 R 60 40 20 0 - 55 0 50 70 100 125 155 180 Ambient Temperature in °C Derating e g a10K olt V st V e T 1K 100 10 10 100 1K 10K 100K 1M 10M Ω Resistance Value R Pulse load rating for arrays with equal values, design type AE, in accordance with EN 60115-1 clause 4.27; 1.2 µs/50 µs; 5 pulses at 12 s interval; for permissible resistance change (0.5 % R + 0.05 Ω) 1.2/50 Pulse e g a10K olt V st V e T 1K 100 10 10 100 1K 10K 100K 1M 10M Ω Resistance Value R Pulse load rating rating for arrays with equal values, design type AE in accordance with EN 60115-1 clause 4.27; 10 µs/700 µs; 10 pulses at 1 min intervals; for permissible resistance change (0.5 % R + 0.05 Ω) 10/700 Pulse Revision: 13-Dec-12 5 Document Number: 28754 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Professional www.vishay.com Vishay Beyschlag TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the temperature range: Lower category temperature, upper following specifications: category temperature; damp heat, long term, 56 days) is EN60115-1, generic specification valid (LCT = - 55 °C/UCT = 125 °C). EN140400, sectional specification Unless otherwise specified the following values apply: EN140401-801, detail specification Temperature: 15 °C to 35 °C Relative humidity: 45 % to 75 % The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202. Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar) The tests are carried out in accordance with IEC60068 (1) The requirements stated in the “Test Procedures and and under standard atmospheric conditions according to Requirements” table are based on the required tests and IEC60068-1 (1), 5.3. Climatic category LCT/UCT/56 (rated permitted limits of EN 140401-801 where applicable. TEST PROCEDURES AND REQUIREMENTS IEC EN REQUIREMENTS 60068-2 (1) 60115-1 TEST PROCEDURE PERMISSIBLE CHANGE (2) TEST CLAUSE (R) METHOD Stability for product types: ACAS 0612 47 to221 k 4.5 - Resistance - ± 1 %; ± 0.5 % At (20/- 55/20) °C and 4.8.4.2 - Temperature coefficient ± 50 ppm/K; ± 25 ppm/K (20/125/20) °C U= P x R or U = U 70 max.; 1.5 h on; 0.5 h off; 4.25.1 - Endurance ± (0.25 % R+ 0.05) whichever is the less severe; 70 °C; 1000 h Endurance at upper 4.25.3 - 125°C; 1000 h ± (0.25 % R+ 0.05) category temperature Damp heat, (40± 2) °C; 56days; 4.24 78 (Cab) ± (0.5 % R+ 0.05) steady state (93 ± 3) %RH U= 2.5 x P x R or ± (0.1 % R+ 0.01) 4.13 - Short time overload (3) 70 U = 2xU ; 5 s no visible damage max. 30min at - 55 °C and Rapid change of ± (0.1 % R+ 0.01) 4.19 14 (Na) 30min at 125 °C; temperature no visible damage 5cycles Reflow method 2 Resistance to soldering ± (0.25 % R+ 0.01) 4.18.2 58 (Td) (IR/forced gas convection); heat no visible damage (260± 5)°C; (10± 1) s Solder bath method; SnPb; non-activated flux accelerated ageing 4 h/155 °C (215± 3) °C; (3 ± 0.3) s Good tinning ( 95 % covered); 4.17.2 58 (Td) Solderability Solder bath method; no visible damage SnAgCu; non-activated flux accelerated ageing 4 h/155 °C (235± 3) °C; (2 ± 0.2) s 4.32 21 (Ue ) Shear (adhesion) 45 N No visible damage 3 ± (0.1 % R+ 0.01) 4.33 21 (Ue ) Substrate bending Depth 2 mm, 3 times no visible damage; 1 no open circuit in bent position U = U RMS ins 4.7 - Voltage proof (60 ± 5)s; against ambient, No flashover or breakdown between adjacent resistors Notes (1) The quoted IEC standards are also released as EN standards with the same number and identical contents. (2) Figures are given for arrays with equal values, design type AE. (3) For a single element. Revision: 13-Dec-12 6 Document Number: 28754 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: ACASA100021000P100 ACASA100022000P100 ACASA100023000P100 ACASA100121001P100 ACASA100122001P100 ACASA100123001P100 ACASA100221002P100 ACASA100221502P100 ACASA100222002P100 ACASA100223002P100 ACASA470124701P100 ACASA470224702P100 ACASA100121002P100 ACASA100125001P100 ACASA100225002P100 ACASA100321003P100 ACASA200122001P100 ACASA200222002P100 ACASA500225002P100 ACASA909139091P500 ACASA499214992P100 ACASA200212002P500 ACASA100211002P500