fi MPLAB PM3 USER(cid:146)S GUIDE © 2006 Microchip Technology Inc. DS51464C

Note the following details of the code protection feature on Microchip devices: (cid:149) Microchip products meet the specification contained in their particular Microchip Data Sheet. (cid:149) Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. (cid:149) There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip(cid:146)s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. (cid:149) Microchip is willing to work with the customer who is concerned about the integrity of their code. (cid:149) Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as (cid:147)unbreakable.(cid:148) Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip(cid:146)s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, Accuron, and may be superseded by updates. It is your responsibility to dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART, ensure that your application meets with your specifications. PROMATE, PowerSmart, rfPIC and SmartShunt are MICROCHIP MAKES NO REPRESENTATIONS OR WAR- registered trademarks of Microchip Technology Incorporated RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, in the U.S.A. and other countries. WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB, LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, SEEVAL, SmartSensor and The Embedded Control Solutions MERCHANTABILITY OR FITNESS FOR PURPOSE. Company are registered trademarks of Microchip Technology Microchip disclaims all liability arising from this information and Incorporated in the U.S.A. its use. Use of Microchip devices in life support and/or safety Analog-for-the-Digital Age, Application Maestro, dsPICDEM, applications is entirely at the buyer(cid:146)s risk, and the buyer agrees dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, to defend, indemnify and hold harmless Microchip from any and FanSense, FlexROM, fuzzyLAB, In-Circuit Serial all damages, claims, suits, or expenses resulting from such Programming, ICSP, ICEPIC, Linear Active Thermistor, use. No licenses are conveyed, implicitly or otherwise, under MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, any Microchip intellectual property rights. PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, Real ICE, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and Zena are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ' 2006, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company(cid:146)s quality system processes and procedures are for its PICmicrofi 8-bit MCUs, KEELOQfi code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip(cid:146)s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS51464C-page ii © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Table of Contents Preface ...........................................................................................................................1 Chapter 1. MPLAB PM3 Overview 1.1 Introduction .....................................................................................................7 1.2 What is MPLAB PM3? ....................................................................................7 1.3 What MPLAB PM3 Does ................................................................................7 1.4 MPLAB PM3 System Components ................................................................8 1.5 MPLAB PM3 CE Compliance .........................................................................8 1.6 How MPLAB PM3 Helps You .........................................................................9 1.7 MPLAB PM3 Operating with a PC ..................................................................9 1.8 MPLAB PM3 Operating without a PC (Stand-alone) ......................................9 1.9 MPLAB Integrated Development Environment ...............................................9 1.10 MPLAB Development Tools .......................................................................10 Chapter 2. Installing MPLAB PM3 2.1 Introduction ...................................................................................................11 2.2 Installing MPLAB PM3 Software ..................................................................11 2.3 Installing MPLAB PM3 Hardware .................................................................12 2.4 Powering Up MPLAB PM3 ...........................................................................15 2.5 Configuring MPLAB IDE for Use with MPLAB PM3 .....................................16 Chapter 3. Tutorial 3.1 Introduction ...................................................................................................23 3.2 Before You Begin .........................................................................................23 3.3 Programming Overview ................................................................................23 3.4 Selecting the Device .....................................................................................24 3.5 Creating the Project ......................................................................................24 3.6 Setting Up Language Tools ..........................................................................26 3.7 Naming the Project .......................................................................................27 3.8 Adding Files to the Project ...........................................................................28 3.9 Building the Initial Project .............................................................................30 3.10 Creating Code ............................................................................................31 3.11 Building the Project ....................................................................................34 3.12 Enabling MPLAB PM3 ................................................................................35 3.13 Programming the Device ............................................................................36 3.14 Verifying the Programming .........................................................................36 3.15 Tutorial Summary .......................................................................................36 © 2006 Microchip Technology Inc. DS51464C-page iii

MPLABfi PM3 User(cid:146)s Guide Chapter 4. Using MPLAB PM3 with MPLAB IDE 4.1 Introduction ...................................................................................................37 4.2 Before You Begin .........................................................................................37 4.3 MPLAB PM3 Dialogs ....................................................................................37 4.4 Setup for Programming a Device .................................................................37 4.5 Programming a Device .................................................................................38 4.6 Verifying the Programming ...........................................................................42 4.7 Reading a Device .........................................................................................43 4.8 Special Programming ...................................................................................43 Chapter 5. Using MPLAB PM3 in Stand-Alone Mode 5.1 Introduction ...................................................................................................45 5.2 Getting Started in Stand-alone Mode ...........................................................45 5.3 Programming a Device .................................................................................46 Chapter 6. Using the MPLAB PM3 Card 6.1 Introduction ...................................................................................................49 6.2 MPLAB PM3 Environment ............................................................................50 6.3 MPLAB PM3 Card ........................................................................................53 Chapter 7. MPLAB PM3 (cid:150) MPLAB IDE Reference 7.1 Introduction ...................................................................................................55 7.2 MPLAB PM3 Toolbar ....................................................................................55 7.3 Configure Menu ............................................................................................56 7.4 MPLAB PM3 Programmer Menu ..................................................................57 7.5 Programmer Settings ...................................................................................62 7.6 Special Programming ...................................................................................70 7.7 Files Used by MPLAB PM3 ..........................................................................74 7.8 Upgrading the MPLAB PM3 Operating System ...........................................75 Chapter 8. Stand-Alone Reference 8.1 Introduction ...................................................................................................77 8.2 MPLAB PM3 LCD and Keys .........................................................................77 8.3 Start-Up Sequence .......................................................................................78 8.4 Main Menu ....................................................................................................78 8.5 Command Menu ...........................................................................................82 Chapter 9. MPLAB PM3 Card Reference 9.1 Introduction ...................................................................................................87 9.2 MPLAB PM3 Card ........................................................................................87 9.3 MPLAB PM3 Card Through MPLAB IDE .....................................................87 9.4 MPLAB PM3 Card in Stand-alone Mode ......................................................97 DS51464C-page iv © 2006 Microchip Technology Inc.

Appendix A. Hardware Specifications A.1 Introduction ..................................................................................................99 A.2 Connecting to a PC via the Serial Port ........................................................99 A.3 Programmer Specifications ........................................................................100 A.4 ICSP Hardware Specifications ...................................................................101 A.5 Socket Module Specifications ....................................................................104 Appendix B. Troubleshooting B.1 Introduction ................................................................................................107 B.2 Troubleshooting Hardware .........................................................................107 B.3 Troubleshooting Operational Problems .....................................................108 B.4 Troubleshooting Software ..........................................................................108 B.5 Common Problems ....................................................................................110 B.6 Error Messages (cid:150) PC .................................................................................113 B.7 Error Messages (cid:150) LCD ..............................................................................114 B.8 Limitations ..................................................................................................116 Glossary .....................................................................................................................117 Index ...........................................................................................................................131 Worldwide Sales and Service ..................................................................................134 © 2006 Microchip Technology Inc. DS51464C-page v

MPLABfi PM3 User(cid:146)s Guide NOTES: DS51464C-page vi © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Preface NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available. Documents are identified with a (cid:147)DS(cid:148) number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is (cid:147)DSXXXXXA(cid:148), where (cid:147)XXXXX(cid:148) is the document number and (cid:147)A(cid:148) is the revision level of the document. For the most up-to-date information on development tools, see the MPLABfi IDE on-line help. Select the Help menu, and then Topics to open a list of available on-line help files. INTRODUCTION This chapter contains general information that will be useful to know before using MPLAB PM3. Items discussed include: (cid:149) Document Layout (cid:149) Conventions Used in this Guide (cid:149) Warranty Registration (cid:149) Recommended Reading (cid:149) The Microchip Web Site (cid:149) Development Systems Customer Change Notification Service (cid:149) Customer Support © 2006 Microchip Technology Inc. DS51464C-page 1

MPLABfi PM3 User(cid:146)s Guide DOCUMENT LAYOUT This document describes how to use MPLAB PM3 as a development tool to emulate and debug firmware on a target board. The manual layout is as follows: (cid:149) Chapter 1.MPLAB PM3 Overview (cid:150) Describes MPLAB PM3 and how it works. (cid:149) Chapter 2.Installing MPLAB PM3 (cid:150) Describes how to install MPLAB PM3 hardware and MPLAB software. Explains how to set up MPLAB IDE and MPLAB PM3 to work together and how to start MPLAB PM3 from MPLAB. (cid:149) Chapter 3.Tutorial(cid:150) Contains several examples (tutorials) for programming calibration memory devices, memory devices and other PICmicrofi MCU devices. (cid:149) Chapter 4.Using MPLAB PM3 with MPLAB IDE (cid:150) Provides step-by-step instructions on using MPLAB PM3 with MPLAB IDE to program, read and verify devices. (cid:149) Chapter 5.Using MPLAB PM3 in Stand-Alone Mode (cid:150) Provides instructions for using MPLAB PM3 in Stand-Alone mode. (cid:149) Chapter 6.Using the MPLAB PM3 Card (cid:150) Provides instructions for using the MPLAB PM3 Card. (cid:149) Chapter 7.MPLAB PM3 (cid:150) MPLAB IDE Reference (cid:150) Describes the commands available through the MPLAB PM3 command line interface as well as error messages. (cid:149) Chapter 8.Stand-Alone Reference (cid:150) Describes the commands available through the MPLAB PM3 LCD. (cid:149) Chapter 9.MPLAB PM3 Card Reference (cid:150) Describes the commands available specifically for the MPLAB PM3 Card. (cid:149) Appendix A.Hardware Specifications (cid:150) Describes how to connect MPLAB PM3 to a communication port. Provides instructions on cleaning MPLAB PM3 socket modules. (cid:149) Appendix B.Troubleshooting (cid:150) Provides information on solving common problems. DS51464C-page 2 © 2006 Microchip Technology Inc.

Preface CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Represents Examples Arial font: Italic characters Referenced books MPLABfi IDE User(cid:146)s Guide Emphasized text ...is the only compiler... Initial caps A window the Output window A dialog the Settings dialog A menu selection select Enable Programmer Quotes A field name in a window or (cid:147)Save project before build(cid:148) dialog Underlined, italic text with A menu path File>Save right angle bracket Bold characters A dialog button Click OK A tab Click the Power tab N(cid:145)Rnnnn A number in verilog format, 4(cid:145)b0010, 2(cid:145)hF1 where N is the total number of digits, R is the radix and n is a digit. Text in angle brackets < > A key on the keyboard Press <Enter>, <F1> Courier New font: Plain Courier New Sample source code #define START Filenames autoexec.bat File paths c:\mcc18\h Keywords _asm, _endasm, static Command-line options -Opa+, -Opa- Bit values 0, 1 Constants 0xFF, ‘A’ Italic Courier New A variable argument file.o, where file can be any valid filename Square brackets [ ] Optional arguments mcc18 [options] file [options] Curly brackets and pipe Choice of mutually exclusive errorlevel {0|1} character: { | } arguments; an OR selection Ellipses... Replaces repeated text var_name [, var_name...] Represents code supplied by void main (void) user { ... } © 2006 Microchip Technology Inc. DS51464C-page 3

MPLABfi PM3 User(cid:146)s Guide WARRANTY REGISTRATION Please complete the enclosed Warranty Registration Card and mail it promptly. Sending in the Warranty Registration Card entitles users to receive new product updates. Interim software releases are available at the Microchip web site. RECOMMENDED READING This user’s guide describes how to use the MPLAB PM3 programmer. Other useful documents are listed below. The following Microchip documents are available and recommended as supplemental reference resources. README for MPLAB PM3 For the latest information on using MPLAB PM3, read the Readme for MPLAB PM3.txt file (an ASCII text file) in the MPLAB IDE\readmes direc- tory. The README file contains update information and known issues that may not be included in this on-line help file. MPLAB PM3 On-line Help MPLABfi IDE Quick Start Guide (DS51281) Describes how to set up the MPLAB IDE software and use it to create projects and program devices. MPLABfi IDE User(cid:146)s Guide (DS51519) Comprehensive guide that describes installation and features of Microchip(cid:146)s MPLAB Integrated Development Environment (IDE). MPASM(cid:153) Assembler, MPLINK(cid:153) Object Linker, MPLIB(cid:153) Object Librarian User(cid:146)s Guide (DS33014) Describes how to use the Microchip PICmicro MCU assembler (MPASM assembler), linker (MPLINK linker) and librarian (MPLIB librarian). MPLAB IDE On-line Help In-Circuit Serial Programming(cid:153) (ICSP(cid:153)) Guide (DS30277) This document contains helpful design guidelines for successful ICSP programming. It includes application notes on hardware designs and the ICSP programming specifications. DS51464C-page 4 © 2006 Microchip Technology Inc.

Preface THE MICROCHIP WEB SITE Microchip provides on-line support via our web site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information: (cid:149) Product Support (cid:150) Data sheets and errata, application notes and sample programs, design resources, user(cid:146)s guides and hardware support documents, latest software releases and archived software (cid:149) General Technical Support (cid:150) Frequently Asked Questions (FAQs), technical support requests, on-line discussion groups, Microchip consultant program member listing (cid:149) Business of Microchip (cid:150) Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE Microchip(cid:146)s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. The Development Systems product group categories are: (cid:149) Compilers (cid:150) The latest information on Microchip C compilers and other language tools. These include the MPLAB C18 and MPLAB C30 C compilers; MPASM and MPLAB ASM30 assemblers; MPLINK and MPLAB LINK30 object linkers; and MPLIB and MPLAB LIB30 object librarians. (cid:149) Emulators (cid:150) The latest information on Microchip in-circuit emulators.This includes the MPLAB ICE 2000 and MPLAB ICE 4000. (cid:149) In-Circuit Debuggers (cid:150) The latest information on the Microchip in-circuit debugger, MPLAB ICD 2. (cid:149) MPLABfi IDE (cid:150) The latest information on Microchip MPLAB IDE, the Windowsfi Integrated Development Environment for development systems tools. This list is focused on MPLAB IDE, MPLAB SIM simulator, MPLAB IDE Project Manager and general editing and debugging features. (cid:149) Programmers (cid:150) The latest information on Microchip programmers. These include the MPLAB PM3 and PRO MATEfi II device programmers and the PICSTARTfi Plus and PICkit(cid:153) 1 development programmers. © 2006 Microchip Technology Inc. DS51464C-page 5

MPLABfi PM3 User(cid:146)s Guide CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: (cid:149) Distributor or Representative (cid:149) Local Sales Office (cid:149) Field Application Engineer (FAE) (cid:149) Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com DS51464C-page 6 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 1. MPLAB PM3 Overview 1.1 INTRODUCTION This chapter presents an overview of the features and requirements of MPLAB PM3. Topics covered in this chapter: (cid:149) What is MPLAB PM3? (cid:149) What MPLAB PM3 Does (cid:149) MPLAB PM3 System Components (cid:149) MPLAB PM3 CE Compliance (cid:149) How MPLAB PM3 Helps You (cid:149) MPLAB PM3 Operating with a PC (cid:149) MPLAB PM3 Operating without a PC (Stand-alone) (cid:149) MPLAB Integrated Development Environment (cid:149) MPLAB Development Tools 1.2 WHAT IS MPLAB PM3? MPLAB PM3 is a Microchip microcontroller device programmer. Through interchangeable programming socket modules, MPLAB PM3 enables you to quickly and easily program the entire line of Microchip microcontroller devices. MPLAB PM3 may be used with MPLAB IDE running under supported Windows Oper- ating Systems (OS’s) (see (cid:147)Readme for MPLAB PM3.txt” file for support list) or as a stand-alone programmer. See (cid:147)Recommended Reading(cid:148) in the (cid:147)Preface(cid:148) for more information. 1.3 WHAT MPLAB PM3 DOES MPLAB PM3 can be set up on the serial (COM 1-4) or USB communications port on your PC. With MPLAB PM3 you can perform the following operations: (cid:149) Program memory, Configuration bits, EEPROM data memory, ID locations and calibration data into devices. (cid:149) Program devices using ICSP(cid:153) (In-Circuit Serial Programming(cid:153)) on the target board and user GO, PASS and FAIL signals to interface with MPLAB PM3. (cid:149) Verify that microcontrollers are blank. (cid:149) Verify that code in the target microcontroller matches your firmware. (cid:149) Read code from an unprotected microcontroller into MPLAB IDE(cid:146)s program memory window for debugging and programming into other devices. (cid:149) Program unique serialized ID numbers into your firmware using Serial Quick Turn Programming (SQTPSM) files. (cid:149) Store environments on an MPLAB PM3 Card. © 2006 Microchip Technology Inc. DS51464C-page 7

MPLABfi PM3 User(cid:146)s Guide 1.4 MPLAB PM3 SYSTEM COMPONENTS The MPLAB PM3 device programmer system consists of the following: (cid:149) MPLAB PM3 device programmer (see Figure1-1) (cid:149) Module sockets Note: A complete line of socket modules is available. The socket modules may be ordered separately for the devices that will be programmed. (cid:149) RS-232 Interface cable to connect to any standard PC serial port (cid:149) USB Interface cable to connect to any standard PC USB port (cid:149) ICSP cable (cid:149) Power supply (cid:149) MPLAB IDE software (cid:150) an Integrated Development Environment including a text editor, project manager and simulator for debugging. Also included are the MPASM assembler, MPLINK object linker andMPLIB object librarian. FIGURE 1-1: MPLABfi PM3 DEVICE PROGRAMMER 1.5 MPLAB PM3 CE COMPLIANCE The MPLAB PM3 device programmer is designed, tested and certified to meet the Electromagnetic Compatibility requirements known as the CE compliance directives. These standards, set by the European Union (EU) countries, include limiting radiated emission, reducing susceptibility to radiated emission and reducing susceptibility to Electrostatic Discharge (ESD). DS51464C-page 8 © 2006 Microchip Technology Inc.

MPLAB PM3 Overview 1.6 HOW MPLAB PM3 HELPS YOU With the MPLAB PM3 device programmer, you can program Microchip devices from a PC Host, or you can use the device programmer as a stand-alone unit. (cid:149) MPLAB PM3 is easy to use and flexible in programming Microchip devices and package types. (cid:149) MPLAB PM3 will expand to support future Microchip devices always providing the latest programming algorithms to support Microchip PICfi microcontroller devices and other Microchip parts, via the Microchip web site (http://www.microchip.com). (cid:149) With an optional MPLAB PM3 Card inserted, you can store and transport device settings for programming. 1.7 MPLAB PM3 OPERATING WITH A PC Using MPLAB Integrated Development System (IDE) as the interface, MPLAB PM3 becomes another tool in MPLAB IDE, allowing you to quickly compile, test and debug your firmware, then download it into MPLAB PM3 to be programmed into your device. 1.8 MPLAB PM3 OPERATING WITHOUT A PC (STAND-ALONE) Without a PC connection to MPLAB PM3, the unit operates as a stand-alone device programmer. However, a PC connection is required for operating system updates. The main programmer features of MPLAB PM3 are available, including Read, Program and Verify. 1.9 MPLAB INTEGRATED DEVELOPMENT ENVIRONMENT The MPLAB IDE desktop provides an environment for developing and debugging your application. MPLAB PM3 is integrated into MPLAB IDE, but you do not need MPLAB IDE to use MPLAB PM3. This document covers the basic setup and operation of the MPLAB PM3 device programmer, but it does not cover all functions of MPLAB IDE. Read the MPLAB IDE documentation to get a full understanding of the features and debug capabilities of MPLAB IDE. © 2006 Microchip Technology Inc. DS51464C-page 9

MPLABfi PM3 User(cid:146)s Guide 1.10 MPLAB DEVELOPMENT TOOLS MPLAB IDE integrates several tools to provide a complete development environment. (cid:149) MPLAB Project Manager The Project Manager is used to create a project and work with the specific files related to the project. When using a project, source code is rebuilt and downloaded to the simulator or emulator with a single mouse click. (cid:149) MPLAB Editor The MPLAB Editor is used to create and edit text files such as source files, code and linker script files. (cid:149) MPLAB SIM Simulator The software simulator models the instruction execution and I/O of the PICmicro MCUs. (cid:149) MPLAB ICE Emulator The MPLAB ICE emulator uses hardware to emulate PICmicro MCUs in real time, either with or without a target system. (cid:149) MPASM Universal Assembler/MPLINK Relocatable Linker/MPLIB Librarian The MPASM assembler allows source code to be assembled without leaving MPLAB IDE. MPLINK linker creates the final application by linking relocatable modules from MPASM assembler, MPLAB C17 and MPLAB C18. MPLIB librarian manages custom libraries for maximum code reuse. (cid:149) MPLAB C18 and MPLAB C30 C Compilers The MPLAB C18 and MPLAB C30 C Compilers provide ANSI-based high-level source code solutions. Complex projects can use a combination of C and assembly source files to obtain the maximum benefits of speed and maintainability. (cid:149) MPLAB PM3, PRO MATE II and PICSTART Plus Programmers Develop code with the simulator or an emulator, assemble or compile it, then use one of these tools to program devices. This can all be accomplished with MPLAB IDE. (cid:149) Third Party Tools Many other companies have development tools for Microchip products that work with MPLAB IDE. Consult the Microchip web site for additional information. DS51464C-page 10 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 2. Installing MPLAB PM3 2.1 INTRODUCTION This chapter describes how to install MPLAB PM3 hardware and software. Topics covered in this chapter include: (cid:149) Installing MPLAB PM3 Software (cid:149) Installing MPLAB PM3 Hardware (cid:149) Powering Up MPLAB PM3 (cid:149) Configuring MPLAB IDE for Use with MPLAB PM3 2.2 INSTALLING MPLAB PM3 SOFTWARE MPLAB PM3 hardware requires the following software support if you are using a PC running Windows: (cid:149) MPLAB IDE software Note: There are alternative command-line programs for MPLAB PM3 control, also installed with MPLAB IDE, named PM3CMD and Visual PROCMD. (cid:149) USB communications driver 2.2.1 MPLAB IDE Software Installation The MPLAB IDE software should be installed by following the instructions in the (cid:147)MPLABfi IDE Quick Start Guide(cid:148) (DS51281). A brief summary of this procedure is discussed next. (cid:149) For a CD-ROM: - Insert the MPLAB IDE CD into the CD-ROM drive. - Follow the on-screen instructions to install the MPLAB IDE software. (cid:149) For the Microchip Website: - Go to www.microchip.com and follow the links to the Development Tools page. - Click the links to the latest MPLAB IDE release and download. © 2006 Microchip Technology Inc. DS51464C-page 11

MPLABfi PM3 User(cid:146)s Guide 2.2.2 USB Driver Installation NOTICE Do not allow the Windows OS to pick a USB driver. MPLAB PM3 will not work with this driver. You must follow the procedure specified at MPLAB IDE software installa- tion to set up the USB driver or to fix an improper driver installation. Install MPLAB IDE first. The USB driver installation instructions will pop up at the end of MPLAB IDE installation. Follow those instructions to install the USB driver. The instructions are in the MPLAB IDE installation directory under: MPLAB PM3\Drivers\instr.htm where instr.htm depends on your Personal Computer (PC) OS: (cid:149) ddpm398.htm (cid:150) Windows 98 (cid:149) ddpm3me.htm (cid:150) Windows ME (cid:149) ddpm3.htm (cid:150) Windows 2000/XP 2.3 INSTALLING MPLAB PM3 HARDWARE IMPORTANT: Do not allow the Windows OS to pick a USB driver. Follow the procedure specified in Section2.2.2(cid:147)USB Driver Installation(cid:148). The MPLAB PM3 hardware is simple to set up: (cid:149) If you are using MPLAB IDE: - Attach the communications cable. - Connect the power supply to MPLAB PM3. - Install the socket module (or attach the ICSP cable). (cid:149) If you are using MPLAB PM3 in Stand-Alone mode: - Connect the power supply to MPLAB PM3. - Install the socket module or attach the ICSP cable. (cid:149) If you are using the MPLAB PM3 Card in MPLAB PM3: - Insert the MPLAB PM3 Card into the SD-MMC port on the back of the programmer. 2.3.1 Installing the Communications Cable MPLAB PM3 provides communications with the host PC via an RS-232 9-pin D type connector or a USB connector. See Figure2-1 for communication port locations. MPLAB PM3 is supplied with two 6-foot data cables: one with DB-9 connectors and one with USB connectors. All lines on the serial cable are wired straight through. The serial cable is NOT a null modem cable. FIGURE 2-1: BACK VIEW OF MPLABfi PM3 Power On Power Off Secure Digital/ Power Input USB Port Serial Port Multi-Media Card Port PWR I O USB SD-MMC RS-232 DS51464C-page 12 © 2006 Microchip Technology Inc.

Installing MPLAB PM3 2.3.1.1 FOR USB COMMUNICATIONS (cid:149) Connect one end of the USB cable to a USB port on your PC. (cid:149) Connect the cable from the PC USB port to the corresponding USB connector on the back of MPLAB PM3. Note: If you are using USB and a (cid:147)New Hardware Detected(cid:148) notice appears on your PC, you must follow the directions on installing the proper driver or your MPLAB PM3 will not work. 2.3.1.2 FOR RS-232 COMMUNICATIONS NOTICE IMPORTANT: Set the COM port FIFO buffers off, the Flow Control to (cid:147)Hardware(cid:148) and Baud Rate to 57600. You will need to reboot your PC for these settings to take effect. See SectionB.5.2.5(cid:147)Manually Setting Up The Port(cid:148) for more information. (cid:149) Connect one end of the RS-232 cable to an available COM port on your PC. Check your PC setup to see which communications port is available. (cid:149) Connect the cable from the PC COM port to corresponding RS-232 connector on the back of MPLAB PM3. For more on serial connections, see SectionA.2(cid:147)Connecting to a PC via the Serial Port(cid:148). 2.3.2 Installing the Power Supply MPLAB PM3 comes with a proprietary external power supply. 1. Make sure that the power switch on the back of the unit is in the OFF position (see Figure2-1). 2. Plug the power supply into a power socket and connect the power supply cable to the unit. © 2006 Microchip Technology Inc. DS51464C-page 13

MPLABfi PM3 User(cid:146)s Guide 2.3.3 Installing a Socket Module or ICSP Cable Socket modules are sold separately. MPLAB PM3 comes with an 18-inch ICSP cable for ICSP programming. See Figure2-2 for location of socket module connectors and ICSP connector. FIGURE 2-2: TOP VIEW OF MPLABfi PM3 MPLABfi PM3 Device Programmer LCD ICSP Connector LEDs M STATUS POWER Socket Module Connectors ESC ENTER Keys/Buttons 2.3.3.1 SOCKET MODULE INSTALLATION Socket modules are available to accommodate each device package. The (cid:147)Product Selector Guide(cid:148) (DS00148) lists Microchip(cid:146)s devices, tools and socket modules. The (cid:147)Development System Ordering Guide(cid:148) (DS30177) describes the available socket modules. Also, the Readme for MPLAB PM3 file lists socket module support for each device. Note: MPLAB PM3 allows hot swapping of socket modules. If the status LED is not lit, sockets can be replaced. 2.3.3.1.1 For MPLAB PM3 Socket Modules 1. Align the connectors on the socket module with the connectors on MPLAB PM3 (Figure2-2). 2. Push the socket module down evenly mating the connectors. It is always a good practice to insert a known blank device and do a Blank Check whenever the socket module is changed. 2.3.3.1.2 For PRO MATE II Socket Modules Note1: In order to use PRO MATE II socket modules with MPLAB PM3, you must obtain an AC164350 adapter kit. See the (cid:147)Development System Ordering Guide(cid:148) (DS30177). 2: The PRO MATE II ICSP socket module is not supported by MPLAB PM3. An 18-inch ICSP cable is included with MPLAB PM3, eliminating the need for an ICSP socket. DS51464C-page 14 © 2006 Microchip Technology Inc.

Installing MPLAB PM3 1. Align the connectors on the adapter with the connectors on MPLAB PM3. 2. Push the adapter down evenly mating the connectors. 3. Align the socket module with the adapter on MPLAB PM3. 4. Tighten the two socket module thumb screws evenly and simultaneously. Avoid over tightening; they should be finger-tight only. Note: The gold connector strips on the PRO MATE II socket module are relatively fragile. Avoid touching them with the socket module screws and avoid over-tightening the screws. It is always a good practice to insert a known blank device and do a Blank Check whenever the socket module it changed. 2.3.3.2 ICSP CABLE INSTALLATION 1. Connect the ICSP cable connector to the ICSP socket on MPLAB PM3 (Figure2-2). 2. Leave the individual leads unconnected at this time. 2.3.3.3 MPLAB PM3 CARD INSERTION 1. Align the MPLAB PM3 Card with the SD-MMC slot on the back of the MPLAB PM3 programmer, and insert the notched corner end of the card into the slot. The card is keyed so that it only goes in one way. 2. Push the card into the slot. 3. To remove the card, push in to eject. 2.4 POWERING UP MPLAB PM3 Once you have connected the hardware and installed the software, you are ready to turn on MPLAB PM3. Turn the power switch on the side of MPLAB PM3 to l (ON) (refer back to Figure2-1). Note: MPLAB PM3 automatically performs a self-test ensuring the programmer is functional. No calibration is required. If any portion of the self-test fails, MPLAB PM3 will display the corrective course of action on the LCD panel. For normal start-up, the MPLAB PM3 will beep once. See SectionB.7(cid:147)Error Messages (cid:150) LCD(cid:148) for information on beep codes and LCD error messages. MPLAB IDE will provide further information to help you debug the issue. On a successful power-up, you should see the following types of messages appear on the LCD panel on the front of MPLAB PM3: (cid:149) MPLAB PM3 splash screen (cid:149) Version numbers and copyright dates (cid:149) MPLAB PM3 menu At this point, you are ready to use MPLAB PM3. If you are going to use MPLAB PM3 with MPLAB IDE (Windows), please refer to Chapter 4.(cid:147)Using MPLAB PM3 with MPLAB IDE(cid:148). If you are going to use MPLAB PM3 in Stand-Alone mode, please refer to Chapter 5.(cid:147)Using MPLAB PM3 in Stand-Alone Mode(cid:148). If you are using the MPLAB PM3 Card with either MPLAB IDE or in Stand-Alone mode, also refer to Chapter 6.(cid:147)Using the MPLAB PM3 Card(cid:148) © 2006 Microchip Technology Inc. DS51464C-page 15

MPLABfi PM3 User(cid:146)s Guide 2.4.1 Indicator Lights and Buzzer Two indicator lights (LEDs) are located on the front of the programmer. A buzzer, for audio indication, is incorporated into the programmer as well. TABLE 2-1: STATUS LED INDICATIONS LED Condition Red Booting up, Programming Failed, Other Error Orange Working/Busy Green Programming Passed TABLE 2-2: POWER LED LED Condition On Programmer powered Off Programmer not powered 2.4.2 Powering Down MPLAB PM3 Turn the power switch on the back of MPLAB PM3 to (cid:147)OFF(cid:148). 2.5 CONFIGURING MPLAB IDE FOR USE WITH MPLAB PM3 2.5.1 Starting MPLAB IDE Once MPLAB IDE is installed on your PC, from the Start menu, select AllPrograms> Microchip MPLAB IDE>MPLAB IDE. The MPLAB IDE desktop should look similar to Figure2-3. FIGURE 2-3: MPLABfi IDE DESKTOP DS51464C-page 16 © 2006 Microchip Technology Inc.

Installing MPLAB PM3 2.5.2 Selecting MPLAB PM3 as the Programmer In addition to MPLAB PM3, the PRO MATE II and PICSTART Plus device programmers are supported under MPLAB IDE. However, only one programmer can be used at a time. Select Programmer>Select Programmer>MPLAB PM3 to select MPLAB PM3 from the list of available programmers (Figure2-4). After MPLAB PM3 is selected: (cid:149) The Programmer menu changes to include the MPLAB PM3 Programmer Menu and Settings. (cid:149) The MPLAB PM3 Toolbar is revealed. (cid:149) The name of the programmer appears on the status bar. FIGURE 2-4: SELECT PROGRAMMER MENU © 2006 Microchip Technology Inc. DS51464C-page 17

MPLABfi PM3 User(cid:146)s Guide 2.5.3 Setting Up the Communications Port You can set up MPLAB PM3 to communicate with MPLAB IDE through one of the serial COM ports (1-4) or USB. 2.5.3.1 SERIAL COMMUNICATIONS From the MPLAB Programmer menu, select Programmer>Settings and click on the Communications tab. A dialog similar to the one shown in Figure2-5 will display. FIGURE 2-5: COMMUNICATIONS PORT SETUP DIALOG The Communications Port Setup dialog shows the possible PC serial and USB communication ports. Click OK to set the options or Cancel to ignore the changes and close the dialog. DS51464C-page 18 © 2006 Microchip Technology Inc.

Installing MPLAB PM3 2.5.3.2 USB COMMUNICATIONS To use USB communications between the PC and the MPLAB PM3 device programmer, select the USB port (Figure2-6). Click OK. CAUTION Do not allow the Windows OS to pick a USB driver; it will not work and you will then not be able to install the proper driver. Follow the procedure specified in Section2.2(cid:147)Installing MPLAB PM3 Software(cid:148). FIGURE 2-6: USB PORT To make sure the port is set up properly, follow the instructions in the (cid:147)For USB Communications(cid:148) subsection in Section2.3.1(cid:147)Installing the Communications Cable(cid:148). © 2006 Microchip Technology Inc. DS51464C-page 19

MPLABfi PM3 User(cid:146)s Guide 2.5.4 Selecting a Device in MPLAB IDE Chose Configure>Select Device to select the device you wish to program from the list of available devices (Figure2-7). When you select a device, indicators next to the Microchip Tools names show the level of support for that device: (cid:149) Green (cid:150) supports the device (cid:149) Yellow (cid:150) limited (advance) support (cid:149) Red (cid:150) no support. If the selected device is supported by MPLAB PM3, click OK. FIGURE 2-7: SELECT DEVICE DIALOG 2.5.5 Enabling MPLAB PM3 To enable MPLAB PM3, select Programmer>Enable Programmer (Figure2-8). The MPLAB PM3 toolbar will appear when the programmer is enabled. See Chapter 7.(cid:147)MPLAB PM3 (cid:150) MPLAB IDE Reference(cid:148) for more reference information on the MPLAB PM3 programmer. The MPLAB PM3 Card is available from the Programmer menu only if you have the MPLAB PM3 Card inserted in the MPLAB PM3 programmer. MPLAB IDE may warn you that your programmer OS Suite is out of date. If you choose, MPLAB IDE will automatically update the necessary files at these warnings. FIGURE 2-8: ENABLE PROGRAMMER DS51464C-page 20 © 2006 Microchip Technology Inc.

Installing MPLAB PM3 If MPLAB PM3 is not found on the selected port, the Communications Error dialog (Figure2-9) will appear. FIGURE 2-9: COMMUNICATIONS ERROR DIALOG If you cannot establish communications between the PC and MPLAB PM3, please make sure you have installed the hardware and software correctly. If you still cannot establish communications between the PC and MPLAB PM3, refer to Appendix B.(cid:147)Troubleshooting(cid:148). If you have been using another programmer (e.g., PICSTART Plus), the MPLAB PM3 menu may be unavailable. From the Programmer menu, select Programmer> SelectProgrammer to bring up the Select Programmer dialog and choose MPLAB PM3 from the list. The MPLAB PM3 menu will appear on the menu bar. 2.5.6 Inserting a Device into MPLAB PM3 If you are using a socket module, insert the device to be programmed into the MPLAB PM3 socket. Position pin one to be top justified in the socket. Secure the device by pushing down the silver lever on the socket or closing the clamshell. © 2006 Microchip Technology Inc. DS51464C-page 21

MPLABfi PM3 User(cid:146)s Guide NOTES: DS51464C-page 22 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 3. Tutorial 3.1 INTRODUCTION The tutorial in this chapter leads you through the steps involved in programming the PIC18F452 PICmicro device using MPLAB IDE Project Wizard. 3.2 BEFORE YOU BEGIN Before you can begin this tutorial, you must: 1. Install the MPLAB IDE software. See Section2.2(cid:147)Installing MPLAB PM3 Software(cid:148). 2. Install the MPLAB PM3 hardware. See Section2.3(cid:147)Installing MPLAB PM3 Hardware(cid:148). 3. Make sure you have read and completed all the instructions in Section2.4(cid:147)Powering Up MPLAB PM3(cid:148) and Section2.5(cid:147)Configuring MPLAB IDE for Use with MPLAB PM3(cid:148). 4. Make sure that your PC and MPLAB PM3 are communicating and the MPLAB PM3 menu appears on the MPLAB IDE menu before you begin this tutorial. 3.3 PROGRAMMING OVERVIEW Programming a device involves the following steps: (cid:149) Selecting the Device (cid:149) Creating the Project (cid:149) Setting Up Language Tools (cid:149) Naming the Project (cid:149) Adding Files to the Project (cid:149) Building the Initial Project (cid:149) Creating Code (cid:149) Building the Project (cid:149) Enabling MPLAB PM3 (cid:149) Programming the Device (cid:149) Verifying the Programming © 2006 Microchip Technology Inc. DS51464C-page 23

MPLABfi PM3 User(cid:146)s Guide 3.4 SELECTING THE DEVICE If you have not already selected the device in MPLAB IDE, do so by selecting Configure>Select Device to open the Select Device dialog (Figure3-1) and select the PIC18F452 device. Under Microchip Programmer Tool Support, verify that this device is supported (green light) by MPLAB PM3. Click OK. FIGURE 3-1: SELECTING THE DEVICE 3.5 CREATING THE PROJECT In order to program the device, you(cid:146)ll need a hex file. In this example, we(cid:146)ll create a project using the Project Wizard. We will use a single assembly file for this project and a linker script. Choose the Project>Project Wizard. FIGURE 3-2: PROJECT WIZARD WELCOME SCREEN Click on Next> to advance to the next dialog in the Project Wizard. DS51464C-page 24 © 2006 Microchip Technology Inc.

Tutorial The next dialog allows you to select the device, which we(cid:146)ve already done. Make sure that it says PIC18F452. If it does not, select the PIC18F452 from the drop down menu. Click Next>. FIGURE 3-3: PROJECT WIZARD (cid:150) SELECT DEVICE © 2006 Microchip Technology Inc. DS51464C-page 25

MPLABfi PM3 User(cid:146)s Guide 3.6 SETTING UP LANGUAGE TOOLS Step Two of the Project Wizard sets up the language tools that are used with this project. Select (cid:147)Microchip MPASM Toolsuite(cid:148) in the Active Toolsuite list box. Then (cid:147)MPASM(cid:148) and (cid:147)MPLINK(cid:148) should be visible in the Toolsuite Contents box. Click on each one to see its location. If MPLAB IDE was installed into the default directory, the MPASM assembler executable will be: C:\Program Files\Microchip\MPASM Suite\MPAsmWin.exe and the MPLINK linker executable will be: C:\Program Files\Microchip\MPASM Suite\MPLink.exe If these do not show up correctly, use the Browse button to set them to the proper files in the MPLAB IDE subfolders. FIGURE 3-4: PROJECT WIZARD (cid:150) SELECT LANGUAGE TOOLS When you are finished, click Next>. DS51464C-page 26 © 2006 Microchip Technology Inc.

Tutorial 3.7 NAMING THE PROJECT Step Three of the wizard allows you to name the project and put it into a folder. This sample project will be called 18F452Proj. Using the Browse button, place the project in a folder on the C drive named My Projects. Click Next>. FIGURE 3-5: PROJECT WIZARD (cid:150) NAME PROJECT © 2006 Microchip Technology Inc. DS51464C-page 27

MPLABfi PM3 User(cid:146)s Guide 3.8 ADDING FILES TO THE PROJECT Step Four of the Project Wizard allows file selection for the project. A source file has not yet been selected, so we will use an MPLAB IDE template file. The template files are simple files that can be used to start a project. They have the essential sections for any source file, and contain information that will help you write and organize your code. These files are in the MPLAB IDE folder, which by default is in the Program Files folder on the PC. There is one template file for each Microchip PICmicro MCU and dsPICfi DSC device. Scroll to the Program Files folder on Drive C:, open it, and scroll down to the Microchip folder. Open the Microchip folder and scroll down to the MPASM Suite directory. Open the MPASM Suite directory and get a template from the Object folder in the Template folder, and choose the file named f452tmpo.asm. If MPLAB IDE is installed in the default location, the full path to the file will be: C:\Program Files\Microchip\MPASM Suite\TEMPLATE\Object\f452tmpo.asm FIGURE 3-6: PROJECT WIZARD (cid:150) SELECT TEMPLATE FILE Press Add>> to move the file name to the right panel, and click on the check box at the start of the line with the file name to enable this file to be copied to our project directory. DS51464C-page 28 © 2006 Microchip Technology Inc.

Tutorial Next, add the second file for our project, the linker script. There is a linker script for each device. These files define the memory configuration and register names for the various parts. The linker scripts are in the folder named LKR under the MPASM Suite folder. Use the file named 18F452.lkr The full path is: C:\Program Files\Microchip\MPASM Suite\LKR\18F452.lkr To copy this linker script into our project, click on the check box. FIGURE 3-7: PROJECT WIZARD (cid:150) SELECT LINKER SCRIPT Make sure that your dialog looks like the picture above, with both check boxes checked, then press Next> to finish the Project Wizard. The final screen of the Project Wizard is a summary showing the selected device, the toolsuite and the new project file name. FIGURE 3-8: PROJECT WIZARD (cid:150) SUMMARY © 2006 Microchip Technology Inc. DS51464C-page 29

MPLABfi PM3 User(cid:146)s Guide After pressing the Finish button, review the Project window on the MPLAB IDE desktop. It should look like Figure3-9. If the Project window is not open, select View>Project. FIGURE 3-9: PROJECT WINDOW 3.9 BUILDING THE INITIAL PROJECT From the Project menu, we can assemble and link the current files. They don(cid:146)t have any of our code in them yet, but this ensures that the project is set up correctly. Click back on the 18f452Proj.mcw window to make it the active window. Now, build the project by selecting Project>Build All. The Output window shows the result of the build process as shown in Figure3-10. FIGURE 3-10: INITIAL BUILD RESULTS WINDOW DS51464C-page 30 © 2006 Microchip Technology Inc.

Tutorial 3.10 CREATING CODE Open the template file in the project by double clicking on its name in the Project window (see Figure3-11). The file has some comments at the beginning, and this area can be used as a standard comment information header for the file. For now, you(cid:146)ll leave this as it is, but if this were a real project, you could put information about your design here. FIGURE 3-11: TEMPLATE FILE Scroll down to the bottom of the file. The code in the first part of the file is for more advanced functions such as setting up interrupts and Configuration bits in a final application. These details can be ignored at this point with focus on writing the code. The new code will be placed in the file at the point after the symbol Main is defined. FIGURE 3-12: TEMPLATE FILE (cid:150) MAIN © 2006 Microchip Technology Inc. DS51464C-page 31

MPLABfi PM3 User(cid:146)s Guide When any source file is opened, you are automatically in the editor. Type in this code: Main: clrf WREG movwf PORTC; clear PORTC movwf TRISC; configure PORTC as all outputs Init clrf COUNT IncCount incf COUNT movf COUNT,W movwf PORTC; display COUNT on PORTC callDelay goto IncCount; infinite loop Delay movlw 0x40; set outer delay loop movwf DVAR2 Delay0 movlw 0xFF movwf DVAR; set inner delay loop Delay1 decfsz DVAR goto Delay1 decfsz DVAR2 goto Delay0 return The template file should now look like Figure3-13. FIGURE 3-13: TEMPLATE FILE (cid:150) ADD CODE DS51464C-page 32 © 2006 Microchip Technology Inc.

Tutorial In this bit of code, we used three variables named COUNT, DVAR and DVAR2. These variables need to be defined in the template file in the UDATA section for uninitialized data. There are already three variables in this section of the template file, ours can be added at the end using the same format. Each variable is an 8-bit variable, so they only need to reserve 1 byte each. FIGURE 3-14: TEMPLATE FILE (cid:150) ADD VARIABLES Add these three lines © 2006 Microchip Technology Inc. DS51464C-page 33

MPLABfi PM3 User(cid:146)s Guide 3.11 BUILDING THE PROJECT Select Project>Build All to assemble and link the code. If the code assembled with no errors, the Output window will look like Figure3-15. FIGURE 3-15: BUILD OUTPUT WINDOW Save your project by selecting File>Save Workspace. If these do not assemble and link successfully, check the following items and then build the project again: (cid:149) Check the spelling and format of the code entered in the Editor window. Make sure the new variables and the special function registers, TRISC and PORTC, are in upper case. If the assembler reported errors in the Output window, double click on the error and MPLAB IDE will open the corresponding line in the source code with a green arrow in the left margin of the source code window. (cid:149) Check that the correct assembler (MPASM assembler) and linker for PICmicro MCU devices is being used. Select Project>Set Language Tool Locations. Click on the plus boxes to expand the Microchip MPASM assembler toolsuite and its executables. Click MPASM Assembler (mpasmwin.exe) and review their location in the display. If the location is correct, click Cancel. If it is not, change it and then click OK. The default search paths can be empty. Upon a successful build, the output file generated by the language tool will be loaded. This file contains the object code that can be programmed into a PICmicro MCU and debugging information so that source code can be debugged, and source variables can be viewed symbolically in Watch windows. Now that you(cid:146)ve built your project successfully, you can prepare for programming your device. DS51464C-page 34 © 2006 Microchip Technology Inc.

Tutorial 3.12 ENABLING MPLAB PM3 If you haven(cid:146)t already started the MPLAB PM3 device programmer, select Programmer>Enable Programmer. The MPLAB PM3 toolbar will appear when the programmer is enabled. Select View>Program Memory and click on Opcode Hex at the bottom of the window (see Figure3-16) to view the hex code you(cid:146)ve just built. You can resize or move the Program Memory window on your display. You may wish to close the Build Results window. FIGURE 3-16: VIEWING PROGRAM MEMORY © 2006 Microchip Technology Inc. DS51464C-page 35

MPLABfi PM3 User(cid:146)s Guide 3.13 PROGRAMMING THE DEVICE Now that you have your data in program memory, you can program the device. Make sure your PIC18F452 device is inserted in the appropriate socket on MPLAB PM3. Then, select Programmer>Program. The MPLAB IDE window will indicate the progress and, when finished, the Output window will display the results (see Figure3-17). FIGURE 3-17: PROGRAMMING RESULTS 3.14 VERIFYING THE PROGRAMMING Select Programmer>Verify to double-check the programming in the device. If any address locations on the device do not match program memory, an error log will display the discrepancies. If the bad data in the error log is 0000, try reseating the socket module. 3.15 TUTORIAL SUMMARY By completing this tutorial, you have performed the major steps for creating, building and programming a simple project. Tasks completed include: Selecting the device (cid:150) the PIC18F452. Using the Project Wizard to create a project, and using the wizard to: (cid:149) select MPLAB IDE built in MPASM assembler and MPLINK linker language tools, (cid:149) add files for the project: a template file for the device selected, and a linker script to build it properly. Writing some simple code to send a changing value out an I/O port. Building the project. And finally, programming the PIC18F452 device. These are the essential steps for programming a device with MPLAB IDE and MPLAB PM3. DS51464C-page 36 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 4. Using MPLAB PM3 with MPLAB IDE 4.1 INTRODUCTION This chapter describes the main steps in programming and reading a device using the MPLAB PM3 device programmer. Topics covered in this chapter include: (cid:149) Before You Begin (cid:149) MPLAB PM3 Dialogs (cid:149) Setup for Programming a Device (cid:149) Programming a Device (cid:149) Verifying the Programming (cid:149) Reading a Device (cid:149) Special Programming 4.2 BEFORE YOU BEGIN Before using MPLAB PM3, you must have performed the following initialization steps: 1. Installed the MPLAB IDE software (Section2.2(cid:147)Installing MPLAB PM3 Software(cid:148)) and MPLAB PM3 hardware (Section2.3(cid:147)Installing MPLAB PM3 Hardware(cid:148)). 2. Turned the power on MPLAB PM3 (Section2.4(cid:147)Powering Up MPLAB PM3(cid:148)). 3. Selected MPLAB PM3 as your programmer (Section2.5.2(cid:147)Selecting MPLAB PM3 as the Programmer(cid:148)). 4. Configured the communications port that MPLAB IDE will use to communicate with MPLAB PM3 (Section2.5.3(cid:147)Setting Up the Communications Port(cid:148)). 5. Selected the device you wish to program from the list of available devices (Section2.5.4(cid:147)Selecting a Device in MPLAB IDE(cid:148)). 6. Enabled (started) the MPLAB PM3 programmer (Section2.5.5(cid:147)Enabling MPLAB PM3(cid:148)). 4.3 MPLAB PM3 DIALOGS The MPLAB PM3 Programmer Menu options are displayed when the programmer is enabled. If the option is unavailable, the item appears in gray (not black) text. The next section will discuss how these dialogs are used to program devices. 4.4 SETUP FOR PROGRAMMING A DEVICE To program a device, you will need: (cid:149) A hex file to program into the device. (cid:149) A device to program. Must be blank if non-flash device. (See Section7.4.7(cid:147)Blank Check All(cid:148).) © 2006 Microchip Technology Inc. DS51464C-page 37

MPLABfi PM3 User(cid:146)s Guide 4.5 PROGRAMMING A DEVICE The steps to program a device include: (cid:149) Setting up the Configuration bits in the Configuration Bits dialog (cid:149) If needed, editing the ID in the User ID Memory dialog (cid:149) Loading the hex code into program memory or building the project into program memory (cid:149) Checking for a blank device (non-flash devices) (cid:149) Programming the device (cid:149) Verifying the programming (cid:149) Reading a device 4.5.1 Configuration Bits Dialog The Configuration Bits dialog opens when you select Configure>Configuration Bits. The type and number of Configuration bits you see in this dialog will depend on the device you have selected. You can also specify the Configuration bit values in your source code. Use the __CONFIG directive in MPASM assembler to set the Configuration bits for the device to be programmed. Each time you rebuild your project or reload your hex file, the Configuration bits will be set according to the values from this directive. If you do not set Configuration bits in your source code, then these bits will not be changed. You can manually change them from their default values using the Configuration Bits dialog and they will be programmed into the device when you program the microcontroller. A value set in the Configuration Bits dialog overrides any value set in the program. Note: Setting Configuration bits here will not affect emulator or simulator operation. To change the Configuration bits settings: 1. Make sure the Configuration Bits window is opened wide enough to view the Settings column (Figure4-1). FIGURE 4-1: CONFIGURATION BITS DIALOG 2. Click on the setting value you wish to change. A down arrow appears to the right of the value. Select a value from the drop-down list box. DS51464C-page 38 © 2006 Microchip Technology Inc.

Using MPLAB PM3 with MPLAB IDE 4.5.2 User ID Memory Dialog Select Configure>ID Memory to edit the user ID memory address. You can also use the __IDLOCS directive to set the ID bytes from MPASM assembler. Each time you rebuild your project or reload your hex file, the ID locations will be set according to the values from the __IDLOCS directive. An ID value set in the User ID Memory dialog (Figure4-2) overrides any value set in the program. FIGURE 4-2: USER ID MEMORY DIALOG To change the User ID: 1. Type the User ID in the field. 2. Select or clear the (cid:147)Use Unprotected Checksum(cid:148) check box as needed. It is recommended that if the device is code-protected, this box be checked to use an unprotected checksum. Most devices use this information to calculate the code-protected checksum. 3. Click OK to set the option or click Cancel to cancel the entry. © 2006 Microchip Technology Inc. DS51464C-page 39

MPLABfi PM3 User(cid:146)s Guide 4.5.3 Loading the Hex Code into Program Memory If you have a hex file (e.g., code.hex) ready for programming into a microcontroller, open the Program Memory window if it is not already open. To do so, from the MPLAB IDE menu, select View>Program Memory. Then, select File>Import... to browse for the file you want to load into the MPLAB IDE Program Memory window. Note: There is no warning for importing files with invalid hex values. That is, the hex file of a 14-bit device may be loaded into the program memory of a 12-bit device and the hex file of a 16-bit device may be loaded into the program memory of a 14-bit device. The Program Memory window should now contain the hex code from the hex file (Figure4-3). FIGURE 4-3: PROGRAM MEMORY (cid:151) HEX CODE DISPLAY If you do not have a hex file with which to program your device, you can build one using MPLAB IDE Projects. MPLAB IDE provides a text editor for generation of source code and compatibility with various assemblers/compilers for assembling/compiling your source code into hex code in MPLAB IDE program memory. For an example on using MPLAB IDE Projects to create a hex file for device programming, refer to Chapter 3.(cid:147)Tutorial(cid:148). Please read the MPLAB IDE documentation to see how to use MPLAB IDE Projects to develop your own firmware. Each time you rebuild your project, the Program Memory window will be updated. 4.5.3.1 IMPORTED HEX FILES AND EEPROM DATA If you imported your hex file into MPLAB IDE and are using EEPROM data memory, make sure your hex code specifies the start of EEPROM data memory. This needs to be specified for use with programmers. DS51464C-page 40 © 2006 Microchip Technology Inc.

Using MPLAB PM3 with MPLAB IDE 4.5.4 Checking For a Blank Device (Non-Flash Devices) You can perform a Blank Check by selecting Programmer>Blank Check All from the MPLAB PM3 menu. This check will verify that the device is completely blank (all bits are set to a (cid:145)1(cid:146)) and all Configuration bits are set to a (cid:145)1(cid:146) (unprogrammed state). If you are using a One-Time Programmable (OTP) device, some Configuration bits (e.g., oscillator bits) might have already been programmed at the factory. Make sure the Configuration bits are set to the factory settings and select Programmer> BlankCheckOTP. This will check that all program memory bits are set to (cid:145)1(cid:146), and that the Configuration bits match the value in the dialog. An OTP device cannot be erased and reprogrammed. If the EPROM device is not blank, you will have to erase it before programming, or select another device: 1. Remove any labels covering the device window. If you do not have a windowed device (Figure4-4) you cannot reprogram it. A windowed version of all EPROM devices may be ordered by requesting the JW package. FIGURE 4-4: WINDOWED DEVICE 2. Place the device in an Ultraviolet (UV) EPROM Eraser. The amount of time required to completely erase a UV erasable device depends on: the wavelength of the light, its intensity, distance from UV source and the process technology of the device (the size of the memory cells). 3. Verify that the device is blank (i.e., perform the Blank Check again) before attempting to program it. If the device is EEPROM/Flash, you do not have to erase it before reprogramming it. These devices are electrically erased before programming. © 2006 Microchip Technology Inc. DS51464C-page 41

MPLABfi PM3 User(cid:146)s Guide 4.5.5 Programming the Device You are ready to program your device. Select Programmer>Program to program the entire device (i.e., all of the program memory, Configuration bits, etc.). If you want to program selectively (e.g., part of program memory, only Configuration bits), select Programmer>Settings to open the Programmer Settings dialog. Click the Memory Ranges tab (see Table4-1 and Section7.5.1(cid:147)Memory Ranges Tab(cid:148)) and select the options for programming. Areas that are grayed out are not available on the device. Click OK. Then, select Programmer>Program to program the device. The memory area corresponding to the checked boxes will be programmed. TABLE 4-1: MEMORY RANGES TAB OPTIONS Option Description Program Memory Start Address Type the start address for the range of program memory. Program Memory End Address Type the end address for the range of program memory. Reset Addresses Click this button to reset the program memory addresses. Program Memory Select this check box if you want to program Program Memory. The program memory range is determined by the program memory start and end address fields. Configuration Bits Select this check box if configuration memory is to be programmed. ID Location Select this check box if the ID location is to be programmed. EEPROM Data Select this check box if the EEPROM data memory is to be programmed. Calibration Memory Select this check box if calibration memory to be programmed. Erase All Before Program Select this check box if the device is to be erased before programming. After MPLAB PM3 programs a device, it automatically performs a verify operation and displays any errors found. An additional verify operation may be done via selecting Programmer>Verify. 4.6 VERIFYING THE PROGRAMMING Click Programmer>Verify to verify that the programming on the device matches the program memory, Configuration bits, ID locations, EEPROM and calibration memory values in MPLAB IDE and in the Settings dialog and Configuration Bits dialog. If there are more errors than expected and those errors claim that the bad data is all zeros (0000), the socket module might not be seated properly. Remove and reseat the socket module. It is always a good practice to insert a known blank device and do a Blank Check whenever the socket module is changed. Note: A verify is automatically done after a program command. DS51464C-page 42 © 2006 Microchip Technology Inc.

Using MPLAB PM3 with MPLAB IDE 4.7 READING A DEVICE To copy the firmware from a programmed device into an unprogrammed device, read the programmed firmware (program memory, Configuration bits, etc.) into MPLAB IDE, then program the new device based on this information. To read the entire device (i.e., all of program memory, Configuration bits, etc.), click Programmer>Read. To read selectively (e.g., part of program memory, only Configuration bits), select Programmer>Settings>Memory Ranges to display the Memory Ranges dialog. Select the options to be read, then click OK in this dialog. Areas that are grayed out are not available on the device. Then, select Programmer>Read. The memory area corresponding to the checked boxes will be read. Once the Read is complete, the Program Memory window will display the data read from the device master. You can save that data as a hex file (File>Export), insert a new device into MPLAB PM3 to copy that same data into a new device, or modify the data in MPLAB IDE before you save to a hex file or program another device. If you attempt to read a code-protected device, you will get a warning indicating that the device is code-protected and that the program memory may be invalid. If this happens, obtain the original hex code from a file or a non-protected device. If you have an MPLAB ICE emulator connected to MPLAB IDE, your code will be downloaded to the emulated program memory of MPLAB ICE. If you have a project open, you will be asked if you want to close it before reading memory from a device. Note: If you keep your project open, the Absolute Listing window and the Source Code window may not match the data you have read into the Program Memory window. Symbols may not match the proper addresses in the Program Memory window. After reading a device into MPLAB IDE, its data will appear in the Program Memory window. You can modify the data, then save it to a hex file by selecting Project>Build Options>Project. See the MPLAB IDE documentation for more information. 4.8 SPECIAL PROGRAMMING 4.8.1 SQTP Serial Quick Turn Programming (SQTP) allows you to program a unique serial number into each device. This number can be used as an entry code, password or ID number. Serialization is done by using a series of RETLW (Return Literal W) instructions, with the serial number bytes as the literal data. To serialize, you must first generate a serialization file, and then use that file to serialize locations in the device microcontroller: 1. To generate an SQTP file, select Programmer>Settings>, click on the SQTP tab and fill in the dialog. 2. To activate serialization, select Programmer>Load SQTP File and choose the file. 3. To program the device, select Programmer>Program. Refer to Section7.5.3(cid:147)SQTP Tab(cid:148) and Section7.6.1(cid:147)Using SQTP(cid:148) for more detailed information on SQTP programming. See Section7.7.1(cid:147)Using Hexadecimal Record Formats(cid:148) for information on hex record formats. © 2006 Microchip Technology Inc. DS51464C-page 43

MPLABfi PM3 User(cid:146)s Guide 4.8.2 ICSP Programming The ICSP (In-Circuit Serial Programming) socket is an extension of the MPLAB PM3 device programmer that allows you to program PICmicro microcontroller devices that are already installed in the target board. MPLAB PM3 comes equipped with an ICSP header and cable. You can locate this con- nector under where a socket module would be installed. See SectionA.4(cid:147)ICSP Hard- ware Specifications(cid:148) for header and cable pinout information. To program a device using ICSP: 1. Select Programmer>Settings and click the Voltages tab. 2. In the (cid:147)ICSP Options(cid:148) area, select (cid:147)Low Voltage Program(cid:148) to program using this method. Be sure to connect the LVP/PGM pin and Enable the Low Voltage Pro- gram Configuration bit if the Low Voltage Program option has been selected. Select (cid:147)Power target circuit from MPLAB PM3(cid:148) if you want to power the circuit through MPLAB PM3 instead of using power from the target board (Figure4-5). FIGURE 4-5: ICSP(cid:153) OPTIONS 3. Connect the ICSP cable connector to the ICSP socket on MPLAB PM3. 4. Connect the necessary cables to the header on your target board. Refer to TableA-3 in Appendix A.(cid:147)Hardware Specifications(cid:148) for cable pins, colors and signals. 5. Program the device. See Section4.5(cid:147)Programming a Device(cid:148). Note: For information on how to program a specific device using ICSP, consult the programming specification for that device. See the README for MPLAB PM3 for a list of programming specifications of supported devices. Programming specifications may also be found on the Microchip web site at www.microchip.com. DS51464C-page 44 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 5. Using MPLAB PM3 in Stand-Alone Mode 5.1 INTRODUCTION This chapter briefly describes how to use the MPLAB PM3 device programmer in Stand-Alone mode. The device programmer provides a graphical LCD interface that gives complete control over a programming session. Topics covered in this chapter include: (cid:149) Getting Started in Stand-alone Mode (cid:149) Programming a Device See Chapter 8.(cid:147)Stand-Alone Reference(cid:148) for detailed descriptions on how to use MPLAB PM3 in Stand-Alone mode. 5.2 GETTING STARTED IN STAND-ALONE MODE MPLAB PM3 operating in Stand-Alone mode allows you to read, program and verify a device without using a PC. Stand-Alone mode is useful in situations where a PC may not be available or even required, such as in the field or in a lab production environment. 5.2.1 Installing a Socket Module See Section2.3.3(cid:147)Installing a Socket Module or ICSP Cable(cid:148) for instructions. Note: An 18-inch ICSP cable is included with MPLAB PM3, eliminating the need for an ICSP socket. Be sure to install the appropriate socket for the device being programmed. When the MPLAB PM3 device programmer is powered up, the unit automatically detects the type of socket module installed. If the part does not support the installed socket, MPLAB PM3 will list the appropriate sockets to use. Note1: MPLAB PM3 allows hot swapping of socket modules. If the status LED is not lit, feel free to switch sockets. 2: In order to use PRO MATE II socket modules with MPLAB PM3, you must obtain an AC164350 adapter kit. See the (cid:147)Development System Ordering Guide(cid:148) (DS30177). 5.2.2 Downloading a Hex File into MPLAB PM3 Memory To set up MPLAB PM3 for Stand-Alone mode, you will need either a PC to download the hex file or a master device to read into MPLAB PM3 memory. Refer to Chapter 2.(cid:147)Installing MPLAB PM3(cid:148) and Section4.5.3(cid:147)Loading the Hex Code into Pro- gram Memory(cid:148) for instructions on connecting MPLAB PM3 to a PC and downloading a hex file, respectively. Now you are ready to use MPLAB PM3 in Stand-Alone mode. © 2006 Microchip Technology Inc. DS51464C-page 45

MPLABfi PM3 User(cid:146)s Guide 5.3 PROGRAMMING A DEVICE After applying power to MPLAB PM3, the unit briefly displays the MPLAB PM3 splash screen and versions screen. Then, MPLAB PM3 displays the Main menu. FIGURE 5-1: MPLABfi PM3 MAIN MENU MPLABfi PM3 Recently Used Select Device MPLAB PM3 Card Programmer Settings Help (cid:149) Recently Used (cid:149) Select Device (cid:149) MPLAB PM3 Card (if inserted) (cid:149) Programmer Settings (cid:149) Help 5.3.1 Recently Used Select (cid:147)Recently Used(cid:148) to retrieve the last device used in MPLAB PM3. This option dis- plays the seven most recently used devices and enables quick access to the Command menu for the device. 5.3.2 Select Device Select (cid:147)Select Device(cid:148) to indicate the device family and then, the device that is to be programmed. After the device is selected, MPLAB PM3 will display the Command Menu with commands that are applicable to the device type and its features, such as Program/Verify Device, Verify Device and All Functions. 5.3.2.1 PROGRAM/VERIFY DEVICE Select (cid:147)Program Verify Device(cid:148) to program the device in the socket module with the hex file that was previously loaded into the internal memory of the device programmer. This is referred to as the image. If the hex file has not been loaded, the system displays a message stating (cid:147)Valid image not present! Please download an image or use a master device before continuing(cid:148). Download the hex file desired for programming the device into MPLAB PM3 before attempting to continue. The device programmer checks to see if the installed microcontroller device is blank. If the device is not blank, the device programmer asks if you want to continue. Answer (cid:147)Yes(cid:148) to continue. Answer (cid:147)No(cid:148) to return to the Command menu. If a flash device is in use, the device will immediately be programmed with the image in the MPLAB PM3. If a One-Time Programmable (OTP) device is being used and the Blank Check Override is enabled on MPLAB PM3, two options (Stop Programming and Continue) will display if the device is not blank. Select (cid:147)Stop Programming(cid:148) if you do not wish programming to continue. Otherwise, select (cid:147)Continue(cid:148) and the device will be pro- grammed. MPLAB PM3 programs the image of the hex file into the microcontroller device con- nected to the programmer. DS51464C-page 46 © 2006 Microchip Technology Inc.

Using MPLAB PM3 in Stand-Alone Mode Programming is performed at the VDD Applied, the VDD minimum and maximum volt- ages (OTP devices) or VDD Nominal that has been established as the default per oper- ating range for the device. See Section8.5.3.7.3(cid:147)Adjust Voltages(cid:148) if the verification needs to be performed at different voltage settings. Verification of the device against the MPLAB PM3 image occurs immediately after programming, along with the display of the resulting checksum if both have been successful. If errors occur during programming or verification, the first address of each memory area that failed will be reported on the LCD. 5.3.2.2 VERIFY DEVICE Select (cid:147)Verify Device(cid:148) to compare the contents of the device to that of the MPLAB PM3 memory (image). This comparison is performed at the VDD Applied, VDD minimum and maximum voltage (OPT devices) or VDD Nominal that has been established as the default per the operating range for the device. See Section8.5.3.7.3(cid:147)Adjust Volt- ages(cid:148) if the verification needs to be performed at different voltage settings. If the content of the device matches the MPLAB PM3 image, the message (cid:147)Passed!(cid:148) and the resulting checksum are displayed on the LCD. If not, the first address of each memory area that failed will be reported on the LCD. 5.3.2.3 READ DEVICE Select (cid:147)All Functions(cid:148) then (cid:147)Read Device(cid:148) to retrieve the contents of the device and place it into the MPLAB PM3 memory. This image can then be used to program suc- cessive devices with the same information or the information can be code-protected then used for programming. If the device is code-protected, a message stating that the device is code-protected will be displayed on the LCD and the contents will not be placed into the MPLAB PM3 memory. However, the resulting checksum will be included in the display if this option has been enabled in the Programmer Settings. If the device is not code-protected, the contents will be placed into the MPLAB PM3 memory. Two options (No and Code Protect All?) will be displayed on the LCD along with the resulting checksum. Select (cid:147)No(cid:148) if code protection of the current or successive devices in not desired. Otherwise, select (cid:147)Code Protect All?(cid:148) if code protection of the current or successive devices is desired. After selecting either code protection option, the display returns to the (cid:147)Read Device(cid:148) option. Press the <ESC> key to return to the Command menu for the device. If code protection was selected, (cid:147)Program Verify Device(cid:148) must be used to program the current or successive devices with the code-protected image in the MPLAB PM3 memory. 5.3.2.4 ALL FUNCTIONS Select (cid:147)All Functions(cid:148) to display all of the stand-alone commands that are applicable to programming, reading, verifying and displaying the status of the currently selected device. See Section8.5.3(cid:147)All Functions(cid:148) for details on each of the options that may be available for the device. © 2006 Microchip Technology Inc. DS51464C-page 47

MPLABfi PM3 User(cid:146)s Guide 5.3.3 MPLAB PM3 Card If a memory card is inserted into MPLAB PM3, the Main menu included the MPLAB PM3 Card option. Selecting this option displays these additional options. Refer to Section9.4(cid:147)MPLAB PM3 Card in Stand-alone Mode(cid:148) for details on these options: (cid:149) Load an Environment (cid:149) View an Environment (cid:149) View Disk Contents (cid:149) Open a test File (*.txt) (cid:149) Card Properties 5.3.4 Programmer Settings From the Programmer Settings option on the Main menu, you can access these options. Refer to Section8.4.3(cid:147)Programmer Settings(cid:148) for more details. (cid:149) Screen Contrast (cid:149) Buzzer Volume (cid:149) Socket Information (cid:149) Checksum Calculation (cid:149) Device ID Option (Beta) (cid:149) Blank Check Override (cid:149) Go Pin Functionality 5.3.5 Help The Help option displays the version number of the MPLAB PM3 OS Suite running on MPLAB PM3 and these submenu options. Refer to Section8.4.4(cid:147)Help(cid:148) for details. (cid:149) ICSP Connector Pinout (cid:149) Status Bar Icons (cid:149) About DS51464C-page 48 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 6. Using the MPLAB PM3 Card 6.1 INTRODUCTION This chapter describes the MPLAB PM3 Card functions and introduces the concept of an Environment. The MPLAB PM3 Card is a multimedia, stamp-sized, Flash memory card that weighs approximately 2 grams. It provides: (cid:149) portable means to store and transfer information (cid:149) fast copy/download (cid:149) high storage capacity (cid:149) nonvolatile solid-state; data is not lost when power is turned off (cid:149) write-protect switch on the card casing (for SD cards only) Using the MPLAB PM3 Card allows you to store information onto the MMC card, send it to a manufacturer, have them place it in their MPLAB PM3 and program Microchip microcontrollers without ever touching a PC. Topics covered in this chapter include: (cid:149) MPLAB PM3 Environment (cid:149) MPLAB PM3 Card © 2006 Microchip Technology Inc. DS51464C-page 49

MPLABfi PM3 User(cid:146)s Guide 6.2 MPLAB PM3 ENVIRONMENT The MPLAB PM3 device programmer uses a new concept called an MPLAB PM3 Environment. An Environment is a snapshot of the current programming settings for a specific device. It contains all the necessary information to recreate the current programming state, including a binary image of the device(cid:146)s memory data, links to an optional SQTP file, specific part information and optional miscellaneous files. When an Environment is saved, a directory is created on the removable MPLAB PM3 Card (an SD-MMC memory card), on the selected drive on a PC or another storage device. The name of the directory created is the same as the name given to the Environment file. Figure6-1 illustrates the layout of an Environment. As an introduction to environments, this covers: (cid:149) Creating an MPLAB PM3 Environment on the MPLAB PM3 Card (cid:149) Loading an MPLAB PM3 Environment into the MPLAB PM3 programmer There are additional operations, such as viewing, copying and deleting Environments. Refer to Chapter 9.(cid:147)MPLAB PM3 Card Reference(cid:148) for specific instructions for each of these operations. FIGURE 6-1: LAYOUT OF AN ENVIRONMENT Environment PM3 File (*.pm3) Programmer Settings Device Optional Misc. files Memory SQTP file (*.txt, Image (*.num) *.hex, etc.) (*.bin) An Environment is the encapsulation of the environment file (*.pm3), the binary bin file (*.bin), optional SQTP num file (*.num) and miscellaneous files. The PM3 file (*.pm3) is a part of the Environment. It is the high-level file that contains MPLAB PM3’s settings, name of the bin file and name of the SQTP file. The device(cid:146)s image (binary file) is the data that should be programmed into the device. It is the same continuous data chunk that is sent between MPLAB IDE and MPLAB PM3 during a standard operation. Error detection mechanisms are also attached. DS51464C-page 50 © 2006 Microchip Technology Inc.

Using the MPLAB PM3 Card 6.2.1 Creating an MPLAB PM3 Environment on the MPLAB PM3 Card An Environment can be created in MPLAB IDE and saved to the MPLAB PM3 Card, your hard drive or other storage device. Multiple Environments can be created, each with its unique name and settings. When an Environment is created and saved, the environment file and all associated files are saved into the same folder. To create and save an MPLAB PM3 Environment on the MPLAB PM3 Card using MPLAB IDE: 1. Open a workspace or import a hex file into MPLAB IDE. Refer to the MPLAB IDE on-line help for additional information. 2. If the MPLAB PM3 programmer is not already enabled, select Programmer>Enable Programmer to enable the programmer. 3. Select Configure>Select Device to open the Select Device dialog. Select the device for which you wish to create an Environment. (See Section2.5.4(cid:147)Selecting a Device in MPLAB IDE(cid:148) for additional information.) 4. Select Programmer>Settings to configure the MPLAB PM3 programmer(cid:146)s settings, such as the memory ranges, voltages or SQTP. (See Section7.5(cid:147)Programmer Settings(cid:148) for additional information.) When finished, click OK to close the Programmer dialog. 5. Select Programmer>Environment>Save to open the Save Environment dialog (Figure6-2). FIGURE 6-2: SAVE ENVIRONMENT DIALOG © 2006 Microchip Technology Inc. DS51464C-page 51

MPLABfi PM3 User(cid:146)s Guide 6. Enter a name for your environment into the (cid:147)Environment Name(cid:148) field. The Environment name can be a maximum of 127 characters. 7. (Optional) Click Browse in the (cid:147)Misc. Files(cid:148) field and select a maximum of 10 files (.txt, .hex, etc.) you want to associate with the Environment. 8. (Optional) Enter a brief description into the (cid:147)Description(cid:148) field. 9. Click Browse in the (cid:147)Destination(cid:148) field and select (cid:147)MPLAB PM3 CARD(cid:148) as the destination. Note: The destination can also be your hard drive or another storage device. 10. Click OK to close the Environment Destination dialog. 11. Click Save to save the environment to the MPLAB PM3 Card. Once successfully created, the Output window will display (cid:147)Environment Name has been created(cid:148). 12. Click Close to close the Save Environment dialog. 6.2.2 Loading an MPLAB PM3 Environment into the MPLAB PM3 Programmer You can load an Environment from the MPLAB PM3 Card into the MPLAB PM3 programmer using either the MPLAB IDE software or Stand-Alone mode. 6.2.2.1 USING MPLAB IDE TO LOAD AN ENVIRONMENT 1. Ensure the MPLAB PM3 Card is fully inserted into the SD-MMC card slot on the back of the MPLAB PM3 programmer, the programmer is powered on and the programmer is enabled through the MPLAB IDE Programmer menu. 2. From the MPLAB IDE Main menu, select Programmer>Environment>Load to open the Load Environment window. 3. Expand the MPLAB PM3 Card directory to display the *.pm3 file you want to load into the programmer. 4. Select the *.pm3 file you wish to load and click OK. 5. When complete, the Load Environment window closes and a completion message displays in the Output window. 6.2.2.2 USING STAND-ALONE MODE TO LOAD AN ENVIRONMENT 1. Ensure the MPLAB PM3 Card is fully inserted into the SD-MMC card slot on the back of the MPLAB PM3 programmer and the programmer is powered on. 2. From the MPLAB PM3 Main menu, select MPLAB PM3 card and press <ENTER>. 3. From the MPLAB PM3 card menu, select Load an Environment and press <ENTER>. 4. From the PM3CARD:\*.pm3 menu, select your Environment folder and press <ENTER>. 5. Select your Environment.pm3 from the your Environment folder and press <ENTER>. DS51464C-page 52 © 2006 Microchip Technology Inc.

Using the MPLAB PM3 Card 6.3 MPLAB PM3 CARD The MPLAB PM3 Card is an MMC card formatted, FAT16-based file system for cross-readability through an external reader. MPLAB IDE is able to communicate to the MPLAB PM3 Card through both serial and USB interfaces. The MPLAB PM3 Card can also be accessed through the MPLAB IDE software or through the MPLAB PM3 programmer in Stand-Alone mode. 6.3.1 MPLAB PM3 Card Through MPLAB IDE Through the MPLAB IDE Programmer menu, you can perform these operations on the MPLAB PM3 Card: (cid:149) List files (cid:150) displays a list of files on the MPLAB PM3 Card (cid:149) Format (cid:150) formats MMC cards in FAT16 format. This operation erases any data that may be stored on the MPLAB PM3 Card and formats the card to the standard FAT16 format. (cid:149) Properties (cid:150) displays the properties of the MPLAB PM3 Card including card capacity, bytes free, bytes used and cluster size. For detailed instructions, see Section9.3(cid:147)MPLAB PM3 Card Through MPLAB IDE(cid:148). 6.3.2 MPLAB PM3 Card Through MPLAB PM3 Programmer In Stand-Alone mode, you can perform these operations on the MPLAB PM3 Card: (cid:149) View Disk Contents (cid:150) displays the contents of the MPLAB PM3 Card on the MPLAB PM3 LCD screen (cid:149) Open a text File (*.txt) (cid:150) displays the first 10 lines (approximately) of text from the selected text file on the programmer(cid:146)s LCD screen (cid:149) Load an Environment (cid:150) loads the selected Environment stored on the MPLAB PM3 Card into the MPLAB PM3 programmer (cid:149) View an Environment (cid:150) displays information including the device, memory files and description of an Environment stored on the MPLAB PM3 Card (cid:149) Card Properties (cid:150) displays the properties of the MPLAB PM3 Card including card capacity, bytes free, bytes used and cluster size For detailed instructions, see Section9.4(cid:147)MPLAB PM3 Card in Stand-alone Mode(cid:148). © 2006 Microchip Technology Inc. DS51464C-page 53

MPLABfi PM3 User(cid:146)s Guide NOTES: DS51464C-page 54 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 7. MPLAB PM3 (cid:150) MPLAB IDE Reference 7.1 INTRODUCTION This chapter describes the dialogs, windows, menus and options of the MPLAB PM3 development system. Topics covered in this chapter include: (cid:149) MPLAB PM3 Toolbar (cid:149) Configure Menu (cid:149) MPLAB PM3 Programmer Menu (cid:149) Programmer Settings (cid:149) Special Programming (cid:149) Files Used by MPLAB PM3 (cid:149) Upgrading the MPLAB PM3 Operating System 7.2 MPLAB PM3 TOOLBAR The MPLAB PM3 toolbar (Figure7-1) consists of icons for some of the programmer functions and a program statistics display. FIGURE 7-1: MPLABfi PM3 TOOLBAR © 2006 Microchip Technology Inc. DS51464C-page 55

MPLABfi PM3 User(cid:146)s Guide Position the mouse pointer over the toolbar item to display the name. Table7-1 lists the items on the toolbar. TABLE 7-1: MPLABfi PM3 TOOLBAR COMMANDS Symbol Command Description Blank Check All Checks that the device is completely blank (all bits are set to (cid:145)1(cid:146)). This will also check that all Configuration bits are set to (cid:145)1(cid:146) (unprogrammed state). (Same as Programmer>Blank Check All.) Read Reads the device. (Same as Programmer>Read.) Program Programs the device. (Same as Programmer>Program.) Verify Verifies that the device was programmed properly. (Same as Programmer>Verify.) Erase Flash Device Erase all memory on a Flash Device. (Same as Programmer>Erase Flash Device.) Program Statistics Provides the number of programming attempts: passed, failed and total. To clear the values in this display, select Programmer>Reset Program Statistics. SQTP File Path Displays the Serial Quick Turn Programming (SQTP) file path. 7.3 CONFIGURE MENU The Configure Menu is an MPLAB IDE menu used in conjunction with the MPLAB PM3 Programmer Menu. Refer to the MPLAB IDE documentation for detailed information. The Configure Menu consists of five dialog selections listed in Table7-2. TABLE 7-2: CONFIGURE MENU Selection Description Select Device Select the device. Configuration Bits Select values for the device Configuration bits. Setting these values will affect both debugger and programmer operation. External Memory Select whether to use external memory or not. Also specify external memory range. ID Memory Enter value into ID memory. Settings Enter default setting for the workspace, debugger, program loading, hot keys and project. DS51464C-page 56 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference 7.4 MPLAB PM3 PROGRAMMER MENU Once the MPLAB PM3 programmer is selected, the full programmer menu displays (see Table7-3). The programmer must be enabled to make additional options available. Some of the MPLAB PM3 options are accessible through the MPLAB PM3 Toolbar. TABLE 7-3: MPLABfi PM3 MENU Selection Description Select Programmer Lists the available programmers. Enable Programmer Enables the programmer. Disable Programmer Disables the programmer. Program Transfers the hex data file to the programmer and programs the device. Selective programming (e.g., part of program memory, or only Configuration bits) can be configured with the (cid:147)Programmer Settings(cid:148) option below. Verify Verifies that the device was programmed properly. Read Reads the device content. Selective read (e.g., part of program memory, only Configuration bits of the device) can be done by setting up (cid:147)Settings(cid:148) below. Blank Check All Checks that the device is completely blank (all bits are set to (cid:145)1(cid:146)). This will also check that all Configuration bits are set to the default value. Blank Check OTP This function is intended for use with OTP devices that come with factory programmed Configuration bits. Before using this function, set the displayed Configuration bits to match the factory programmed settings. The function verifies that all program memory bits are set to (cid:145)1(cid:146) and that the Configuration bits match the settings displayed in the Configuration Bits dialog. Erase Flash Device Erase all memory on a Flash device. Reset Program Statistics Resets the counters in the Program Statistics area. Transfer to MPLAB PM3 Transfers the image of the MPLAB IDE(cid:146)s memory to the programmer, but does not program the device. This is useful for stand-alone operation. Transfer from MPLAB PM3 Transfers the image of the programmer(cid:146)s memory to MPLAB IDE, but does not read the device memory. This is useful for reading back the memory after working in Stand-Alone mode. Establish Resets the programmer hardware and reestablishes Communications communications. Use this option if power has been disconnected from the programmer. This option does not reset programming information in the Program Memory window, Configuration bits or IDs. Load SQTP File Allows the user to select a previously defined SQTP file. Refer to Using SQTP. About Displays the OS Suite version of MPLAB PM3. Environment Displays a submenu of operations the can be performed on the environment. See Chapter 9.(cid:147)MPLAB PM3 Card Reference(cid:148) for more information on the environment operations. MPLAB PM3 Card Displays a submenu of operations that pertain to the MPLAB PM3 Card. See Chapter 9.(cid:147)MPLAB PM3 Card Reference(cid:148) for more information on the MPLAB PM3 Card operations. Settings Opens the Programmer dialog, which allows setting the memory ranges and voltage specs, SQTP and communication ports. Programmer options Program, Read, Verify, Transfer to MPLAB PM3 and Transfer from MPLAB PM3 will be limited to these settings until reset. © 2006 Microchip Technology Inc. DS51464C-page 57

MPLABfi PM3 User(cid:146)s Guide 7.4.1 Select Programmer To select the MPLAB PM3 programmer, select Select Programmer>MPLAB PM3. Once the programmer is selected, the Output window opens. 7.4.2 Enable Programmer To enable the MPLAB PM3 programmer, select Programmer>Enable Programmer. If updates are available for the programmer firmware, MPLAB IDE may display a prompt to update. If auto download has been set in the Configuration dialog, MPLAB IDE will automatically update the necessary files. Once the MPLAB PM3 programmer is selected, the full menu displays. Enable the programmer to make additional menu items available. Some of the MPLAB PM3 menu items are similar to buttons on the MPLAB PM3 Toolbar. 7.4.2.1 OUTPUT WINDOW When you select Programmer>Select Programmer>MPLAB PM3 from the MPLAB PM3 menu or select View>Output from the MPLAB IDE menu, the Output window opens. This window contains tabbed information about program output. Refer to the MPLAB IDE documentation for more information. The menu items in the Output window available from the right mouse button menu are: (cid:149) Select All (cid:150) Selects all text and graphics in the Edit window. (cid:149) Copy (cid:150) Copies the selected text in the current window onto the clipboard. After this operation, paste the copied text into another MPLAB Editor window, into another location in the same MPLAB Editor window, or into another Windows application. (cid:149) Clear Page (cid:150) Clears the contents of the Output window. 7.4.2.2 PROGRAM MEMORY WINDOW When you select View>Program Memory from the MPLAB IDE menu, the Program Memory window (Figure7-2) opens in machine code view. FIGURE 7-2: PROGRAM MEMORY WINDOW DS51464C-page 58 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference You can view the Program Memory as hex code, machine code or disassembled with symbols (if available). Change the display mode by clicking on the Display Option button in the lower left corner of the window. When the MPLAB ICE emulator is selected as the Debugger, the Program Memory window shows the data that is in the emulation memory of the MPLAB ICE pod. This memory is read by the MPLAB ICE probe when run, single stepped or traced using the emulator. When the simulator is selected as the Debugger, the Program Memory window reflects the contents of a memory buffer on the PC. This memory is read by MPLAB SIM when run, single stepped or traced. If program memory is read with the MPLAB PM3 programmer while in emulator or simulator mode, it will overwrite the program memory being emulated or simulated. This can cause (cid:147)mismatches(cid:148) between the program memory and debug information if an MPLAB IDE project is open. The system displays an option to either close the cur- rent MPLAB IDE project or to continue and read the device(cid:146)s memory into the Program Memory window. Subsequent debug operations might not work properly. 7.4.3 Disable Programmer To disable the MPLAB PM3 programmer, select Programmer>Disable Programmer. 7.4.4 Program Select Programmer>Program to program the entire device (i.e., all of the program memory, Configuration bits, etc.). To program selectively (e.g., part of program memory, only Configuration bits), select Programmer>Settings to open the Programmer Settings dialog. Click the Memory Ranges tab and select the options for programming. Areas that are grayed out are not available on the device. Click OK. Then select Programmer>Program to program the device. The memory area corresponding to the checked boxes will be programmed. After MPLAB PM3 programs a device, it automatically performs a verify operation and displays any errors found. An additional verify operation may be done via selecting Programmer>Verify. 7.4.5 Verify To verify the programming on the device, select Programmer>Verify. This verifies that the programming on the device matches the program memory, Configuration bits, ID locations, EEPROM and calibration memory values in MPLAB IDE and in the Settings dialog and Configuration Bits dialog. If there are more errors than expected and those errors claim that the bad data is all zeros (0000), the socket module might not be seated properly. Remove and reseat the socket module. It is always a good practice to insert a known blank device and do a Blank Check whenever the socket module is changed. When the programming is finished, (cid:147)Programming/Verification completed successfully!(cid:148) will be displayed in the Output window. If the programming failed, an error message will appear showing the good (expected) data and the bad (actual) data for each address it attempted to program. © 2006 Microchip Technology Inc. DS51464C-page 59

MPLABfi PM3 User(cid:146)s Guide 7.4.6 Read To copy the firmware from a programmed PIC MCU device into an unprogrammed device, read the programmed firmware (program memory, Configuration bits, etc.) into MPLAB IDE, then program the new device based on this information. To read the entire device (i.e., all of program memory, Configuration bits, etc.), click Programmer>Read. To read selectively (e.g., part of program memory, only Configuration bits), select Programmer>Settings>Memory Ranges to display the Memory Ranges dialog. Select the options to be read, then click OK in this dialog. Areas that are grayed out are not available on the device. Then, select Programmer>Read. The memory area corresponding to the checked boxes will be read. Once the Read is complete, the Program Memory window will display the data read from the device master. Save that data as a hex file and insert a new device into MPLAB PM3 to copy that same data into a new device, or modify the data in MPLAB IDE before saving to a hex file or program another device. Attempting to read a code-protected device displays a warning indicating that the device is code-protected, and that the program memory may be invalid. If this happens, obtain the original hex code from a file or a non-protected device. If an MPLAB ICE emulator is connected to MPLAB IDE, the code will be downloaded to the emulated program memory of the MPLAB ICE. If a project is open, the system asks if you want to close it before reading memory from a device. Note: If the project is kept open, the Absolute Listing window and the Source Code window may not match the data previously read into the Program Memory window. Symbols may not match the proper addresses in the Program Memory window. 7.4.7 Blank Check All After inserting the device in the socket, select Programmer>Blank Check All from the MPLAB PM3 menu. This check will verify that the device is completely blank (all bits are set to (cid:145)1(cid:146)) and all Configuration bits are set to the default value. When complete, the results will be displayed in the Output window, for example: Configuration memory is blank. EEData memory is blank. ID memory is blank. Program memory is blank. If using a One-Time Programmable (OTP) device, some Configuration bits (e.g., oscillator bits) might have already been programmed at the factory. Make sure the Configuration bits are set to the factory settings and select Programmer>Blank CheckOTP. This will check that all program memory bits are set to (cid:145)1(cid:146), and that the Configuration bits match the value in the dialog. An OTP device cannot be erased and reprogrammed. DS51464C-page 60 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference If the EPROM device is not blank, erase it before programming, or select another device: 1. Remove any labels covering the device window. A non-windowed device cannot be reprogrammed. A windowed version of all EPROM devices may be ordered by requesting the JW package. 2. Place the device in an Ultraviolet (UV) EPROM Eraser. The amount of time required to completely erase a UV erasable device depends on: the wavelength of the light, its intensity, distance from UV source and the process technology of the device (how small the memory cells are). 3. Before attempting to program the device, perform the Blank Check again to verify that it is blank. Note: If the device is EEPROM or Flash, it is not necessary to erase it before reprogramming it. These devices are electrically erased before programming. 7.4.8 Erase Flash Device With the device inserted the socket, select Programmer>Erase Flash Device from the MPLAB PM3 menu. Then, select Programmer>Blank Check All from the MPLAB PM3 menu. This check will verify that the device is completely blank (all bits are set to (cid:145)1(cid:146)) and all Configuration bits are set to the default value. 7.4.9 Reset Program Statistics To reset all the program statistics, select Programmer>Reset Program Statistics. This command will reset the counters in the Program Statistics area. 7.4.10 Transfer to MPLAB PM3 To transfer the hex file to the programmer, select Programmer>Transfer to MPLAB PM3. This command only transfers the data, it does not program the device. This is usually used for stand-alone operation. 7.4.11 Transfer from MPLAB PM3 To transfer the programmer memory to the hex file, select Programmer>Transfer from MPLAB PM3. This command only transfers the programmer memory, it does not read the device memory. This is especially useful for reading the programmer memory back after working in Stand-Alone mode. 7.4.12 Establish Communications To establish communications between the PC and MPLAB PM3 after power has been disconnected from the programmer, select Programmer>Establish Communications. This command resets the programmer hardware and reestablishes communications. It does not reset programming information in the Program Memory window, Configuration bits or IDs. 7.4.13 About Select Programmer>About to display version of the MPLAB PM3 OS Suite in the programmer. © 2006 Microchip Technology Inc. DS51464C-page 61

MPLABfi PM3 User(cid:146)s Guide 7.5 PROGRAMMER SETTINGS Select Programmer>Settings to display the Programmer Settings dialog. (cid:149) Memory Ranges Tab (cid:149) Voltages Tab (cid:149) SQTP Tab (cid:149) Communications Tab (cid:149) Configuration Tab 7.5.1 Memory Ranges Tab Select Programmer>Settings and click on the Memory Ranges tab to select device memory areas for programming (see Figure7-3 and Table7-4). FIGURE 7-3: MEMORY RANGES TAB DS51464C-page 62 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference TABLE 7-4: MEMORY RANGES OPTIONS Selection Description Program Memory Start Address Type the start address for the range of program memory (in hex). Program Memory End Address Type the end address for the range of program memory (in hex). Reset Addresses Click this button to reset the program memory addresses. Program Memory Select this check box to program Program Memory. The program memory range is determined by the Program memory start and end address fields. Configuration Bits Select this check box if configuration memory is to be programmed. ID Location Select this check box if the ID location is to be programmed. EEPROM Data Select this check box if the EEPROM data memory is to be programmed. Calibration Memory Select this check box if calibration memory to be programmed. Erase All Before Program Select this check box if the device is to be erased before programming. 7.5.2 Voltages Tab Select Programmer>Settings and click on the Voltages tab to view or set the voltages for the device (Figure7-4). FIGURE 7-4: VOLTAGES TAB © 2006 Microchip Technology Inc. DS51464C-page 63

MPLABfi PM3 User(cid:146)s Guide Certain voltages may be viewed/set for Flash devices (see Table7-5) and Non-Flash devices (see Table7-6). Other voltages are applicable to both types of devices (see Table7-7). For Information on changing voltage settings and using low voltage pro- gramming, see Section7.5.2.1(cid:147)Changing Voltage Settings(cid:148) and Section7.5.2.2(cid:147)Using Low Voltage Program(cid:148), respectively. TABLE 7-5: FLASH DEVICES Selection Description VDD APP This is the voltage used by the programmer to verify Flash memory. The default is the device’s nominal voltage value. TABLE 7-6: NON-FLASH DEVICES Selection Description VDD Min This voltage and VDD Max are used by the programmer to verify memory in EEPROM devices. The value should be the minimum voltage for the designated circuit. The default is the device’s minimum voltage value. VDD Max This voltage and VDD Min are used by the programmer to verify memory. The value should be the maximum voltage for the designated circuit. The default is the device’s maximum voltage value. TABLE 7-7: ALL DEVICES Selection Description VDD Nom This is the voltage at which the device is programmed. This should be the average voltage at which the system will run. The default is 5 volts. VPP This is the voltage used to bring the device into a program- ming mode. Although this is dependent of the device’s programming specification, it may be changed. If (cid:147)Low Voltage Program(cid:148) is selected, this is changed to VDD Nom by the programmer. Reset Voltages Resets all voltages to their default values. Low Voltage Program In ICSP(cid:153) mode, select this checkbox to perform Low Volt- age programming. Low Voltage programming uses a dedi- cated pin to enter into the programming mode versus a high voltage on VPP. This check box is ignored when a socket is installed. Power Target Circuit from In ICSP mode, this allows the target circuit to be powered MPLAB PM3 from MPLAB PM3 to supply power for programming. This check box is ignored when a socket is installed. DS51464C-page 64 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference 7.5.2.1 CHANGING VOLTAGE SETTINGS Change voltage settings only if the application runs at the extreme voltage operating range. Most users will never need to change the default voltage settings. (cid:149) Flash Devices: VDD APP is the voltage that a Flash device will be verified. (cid:149) Non-Flash Devices: VDD MAX and VDD MIN are the voltages at which programmed microcontroller devices will be verified. (cid:149) VDD NOM is the voltage at which the device will be programmed. (cid:149) VPP is the voltage at which the device will enter programming mode. Select Programmer>Settings and click on the Voltages tab to display the current voltage settings. To change a voltage, select the desired VDD minimum, nominal, maximum or VPP voltage value from the list next to each setting. Note: The voltage range and default voltage setting may be different for each microcontroller device type. Refer to the device programming specification for voltage values for each device. TABLE 7-8: VOLTAGE SETTINGS Voltage Selection Default Voltage VDD APP (2.00 .. 5.5) 5.00 VDD MIN (2.00 .. 5.5) 3.00 VDD MAX (2.00 .. 5.5) 5.50 VDD NOM (2.00 .. 5.5) 5.00 VPP (12.5 .. 13.5) 13.25 7.5.2.2 USING LOW VOLTAGE PROGRAM The Low Voltage Program checkbox under Voltages functions as follows: (cid:149) Enabled only when a Flash device that is low voltage capable is selected. (cid:149) Selection is transferred from MPLAB IDE to MPLAB PM3 by performing a Blank Check, read, program, verify or transfer to MPLAB PM3. Transfer from the pro- grammer will not update the checkbox in MPLAB IDE. (cid:149) Setting of the low voltage checkbox has no impact on the enabling/disabling of the low voltage Configuration bit. (cid:149) Only performs a Low Voltage Program in ICSP mode. See Section7.6.2.1(cid:147)Using Low Voltage Program(cid:148). © 2006 Microchip Technology Inc. DS51464C-page 65

MPLABfi PM3 User(cid:146)s Guide 7.5.3 SQTP Tab Use Serial Quick Turn Programming (SQTP) to program a unique serial number into each device. This number can be used as an entry code, password or ID number. Select Programmer>Settings and click on the SQTP tab to view or set up SQTP programming for the device (Figure7-5). Also see Section7.6.1(cid:147)Using SQTP(cid:148). FIGURE 7-5: SQTP TAB TABLE 7-9: SQTP MENU Selection Description Random Select this option to generate unique, random numbers for each part. Pseudo-Random Select this option to generate a pseudo-random set of Seed Value (Hex) non-repeating numbers based on the seed value specified. Sequential Select this option to generate sequential numbers based on Start Value (Hex) the starting value specified and incrementing each number Increment (Hex) by the amount specified. Start Address (Hex) Enter the starting address (in hex) for the serial number. Number of Words (Dec) Enter the size of the serial number. Make sure a large enough serial number is specified for the number of parts planned to program using this file. Number of Parts (Dec) Enter the number of parts to be programmed using this file. Generate Opens the Save SQTP File As dialog. DS51464C-page 66 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference 7.5.4 Communications Tab To set the port for communications between the programmer and the PC, select Programmer>Settings and click on the Communications tab. Communications between the programmer and the PC may be either over a serial connection or a USB connection. Note: Do not physically connect both. The Windows COM port setup requires special attention. The proper drivers must be installed and the port may need to be set up manually. For additional information on the communication port setup, refer to Section2.3.1(cid:147)Installing the Communications Cable(cid:148), Section2.5(cid:147)Configuring MPLAB IDE for Use with MPLAB PM3(cid:148) and B.5.1(cid:147)Failure to Establish Communication with Programmer(cid:148). 7.5.4.1 SERIAL COMMUNICATION To use RS-232 (serial) communications between the PC and the MPLAB PM3 device programmer, select the PC COM port for use: COM1, COM2, COM3 or COM4 (Figure7-6). COM1 is the default. Click OK. FIGURE 7-6: SERIAL COM PORT To make sure the port is set up properly, follow the instructions in the (cid:147)For RS-232 Communications(cid:148) subsection in Section2.3.1(cid:147)Installing the Communications Cable(cid:148). © 2006 Microchip Technology Inc. DS51464C-page 67

MPLABfi PM3 User(cid:146)s Guide 7.5.4.2 USB COMMUNICATIONS To use USB communications between the PC and the MPLAB PM3 device programmer, select the USB port (Figure7-7). Click OK. CAUTION Do not allow the Windows OS to pick a USB driver. Follow the procedure specified in Section2.2(cid:147)Installing MPLAB PM3 Software(cid:148). FIGURE 7-7: USB PORT To make sure the port is set up properly, follow the instructions in the (cid:147)For USB Communications(cid:148) subsection in Section2.3.1(cid:147)Installing the Communications Cable(cid:148). 7.5.4.3 SWITCHING THE COMMUNICATION MODE If MPLAB PM3 is enabled in one mode of communication (USB or serial) and you wish to switch to the other mode, do the following: 1. Deselect the programmer in MPLAB IDE (Programmer>Select Programmer>None). 2. Turn the MPLAB PM3 programmer off and physically change the communications cable connection. If not already done, install the proper drivers. 3. Turn the MPLAB PM3 programmer back on. 4. Reselect the programmer (Programmer>Select Programmer>MPLAB PM3). 5. Select the other mode of communication (Programmer>Settings, Communications tab). 6. Enable the programmer (Programmer>Enable Programmer). DS51464C-page 68 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference 7.5.5 Configuration Tab 7.5.5.1 AUTOMATIC DOWNLOAD To set MPLAB PM3 to automatically download any firmware updates, select Programmer>Settings and click on the Configuration tab (Figure7-8). Then, select the Auto Download Firmware check box for new firmware to be automatically downloaded upon starting MPLAB PM3. FIGURE 7-8: CONFIGURATION TAB If you do not want firmware updates to automatically download, leave the checkbox empty. If there are updates available, the system will prompt to download. © 2006 Microchip Technology Inc. DS51464C-page 69

MPLABfi PM3 User(cid:146)s Guide 7.5.5.2 MANUAL DOWNLOAD It is recommended that MPLAB PM3 automatically detect and notify of any upgrades. Normally, it is not necessary to manually update the OS Suite for the MPLAB PM3 programmer; however, if you need to revert to an earlier OS Suite version, select Programmer>Settings and click on the Configuration tab. Then, click the Manual Download button. If this option is selected, the system will prompt with an auto update notice (Figure7-9). To continue with the download, click Yes, or click No to cancel. FIGURE 7-9: MANUAL DOWNLOAD Clicking Yes opens a Browse window to select the appropriate file from the MPLAB IDE directory. The format of the OS Suite file is pm3nnnnnn.mjc, where nnnnnn is the OS Suite version. 7.6 SPECIAL PROGRAMMING 7.6.1 Using SQTP Serialization of devices is done by using a series of RETLW (Return Literal W) instructions, with the serial number bytes as the literal data. To serialize, first generate a serialization file, and then use that file to serialize locations in the device microcontroller. Using SQTP includes these steps: (cid:149) Generating the SQTP File (cid:149) Activating Serialization (cid:149) Programming the Device Refer to Section7.7.1(cid:147)Using Hexadecimal Record Formats(cid:148) for more information on hex record formats. DS51464C-page 70 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference 7.6.1.1 GENERATING THE SQTP FILE 1. Select Programmer>Settings and click on the SQTP tab to view or select the SQTP settings (Figure7-10). FIGURE 7-10: SQTP TAB 2. Fill in the appropriate values for the type of SQTP file. TABLE 7-10: SQTP MENU Selection Description Random Select this option to generate unique, random numbers for each part. Pseudo-Random Select this option to generate a pseudo-random set of Seed Value (Hex) non-repeating numbers based on the seed value specified. Sequential Select this option to generate sequential numbers based on Start Value (Hex) the starting value specified and incrementing each number by Increment (Hex) the amount specified. Start Address (Hex) Enter the starting address (in hex) for the serial number. Number of Words (Dec) Enter the size of the serial number. Make sure a large enough serial number is specified for the number of parts planned to program using this file. Number of Parts (Dec) Enter the number of parts to be programmed using this file. Generate Opens the Save SQTP File As dialog. 3. Click Generate. The Save SQTP File As dialog opens. 4. Select the location and file name for the file and click Save. The SQTP file will contain a line for each part; if specified for 1,000 parts or devices, the file will contain 1,000 lines, each with a unique serial number. © 2006 Microchip Technology Inc. DS51464C-page 71

MPLABfi PM3 User(cid:146)s Guide 7.6.1.2 ACTIVATING SERIALIZATION Select Programmer>Load SQTP File to choose the SQTP file to use. Click Open to enable serialization for the current programming session. After enabling serialization, the serial number that will be programmed into the next device can be seen at the program memory address specified when the SQTP file was generated. Look for the RETLW instruction in the Program Memory window. 7.6.1.3 PROGRAMMING THE DEVICE After loading the SQTP file, simply select Programmer>Program to program a device. When the device is programmed, the Program Memory window will display the next serial number. If the last serial number in the file has been used, a message will appear and serialization will be disabled. When a serial number is used, the SQTP file is marked by replacing the colon for that entry with a semicolon so that MPLAB PM3 will skip that line during later programming sessions. To use the same SQTP file over multiple programming sessions without repeating any numbers, generate an SQTP file with many more parts than will be programmed in a single session. For example, if an SQTP file for 10,000 parts was generated and only 1,000 parts are programmed in each session, the file can be used ten times. 7.6.2 Using ICSP MPLAB PM3 comes equipped with an ICSP pin header and cable. Attach the ICSP cable to the connector located between the two socket module connectors on MPLAB PM3. A socket module cannot be installed while using the ICSP connection. Note: Since MPLAB PM3 has ICSP built in, the PRO MATE II ICSP Socket Mod- ule (AC04004) and MPLAB PM3-to-PRO MATE II device adapter cannot be used. 7.6.2.1 USING LOW VOLTAGE PROGRAM MPLAB PM3 allows Low Voltage Programming (LVP) with certain PICXXFXXX Flash devices. The Flash device selected must be capable of low voltage and programming must be performed in ICSP mode. Refer to the specific device(cid:146)s specification and the (cid:147)In-Circuit Serial Programming(cid:153) (ICSP(cid:153)) Guide(cid:148) (DS30277). (cid:149) Selection is transferred from MPLAB IDE to MPLAB PM3 by performing a Blank Check, read, program, verify or transfer to MPLAB PM3. Transfer from the pro- grammer will not update the checkbox in MPLAB IDE. (cid:149) Setting of the low voltage checkbox has no impact on the enabling/disabling of the low voltage Configuration bit. DS51464C-page 72 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference To use low voltage programming: 1. Select the device to program using Configure>Select Device and choosing the device. 2. Select and enable MPLAB PM3. 3. Go to Programmer>Settings and click on the Voltages tab. 4. In the ICSP Options area, select the Low Voltage Program checkbox (Figure7-11). FIGURE 7-11: LOW VOLTAGE PROGRAM OPTION © 2006 Microchip Technology Inc. DS51464C-page 73

MPLABfi PM3 User(cid:146)s Guide 7.7 FILES USED BY MPLAB PM3 MPLAB PM3 can use information directly from MPLAB IDE projects without any intermediate steps. MPASM assembler can be used separately from MPLAB IDE to produce hex files for MPLAB PM3. Alternatively, devices can be programmed with hex files from any PICmicro MCU-compatible cross-assembler or cross-compiler. If using MPASM assembler separate from MPLAB IDE, or generating hex files from within MPLAB IDE for use later with MPLAB PM3, use either INHX8M or INHX32 hex formats. MPASM assembler(cid:146)s default output format for hex files is INHX32. If programming PIC17CXXX, PIC18CXXX or PIC18FXXX devices, use INHX32 format. See the (cid:147)MPASM(cid:153) Assembler, MPLINK(cid:153) Object Linker, MPLIB(cid:153) Object Librarian User(cid:146)s Guide(cid:148) (DS33014) for details on file formats. 7.7.1 Using Hexadecimal Record Formats The following provides the proper file format for the PICmicro MCU device families. Make sure the assembler or compiler is configured to generate hex files in the proper format. MPLAB PM3 uses the formats described in Table7-11. TABLE 7-11: PICmicrofi MCU DEVICE FAMILY FILE FORMATS Device Family File Format PIC16C5X/6X Uses INHX8M PIC17CXX Uses INHX32 PIC18XXX Uses INHX32 Firmware Downloads Uses INHX32 Each hexadecimal data record has the following format: :BBAAAATTHHHH....HHCC TABLE 7-12: HEX DATA RECORD FORMAT Record Format Description : Start character (prefix) BB 2-digit byte count specifying the number of data blocks in a record AAAA 4-digit starting address of the data record TT 2-digit record type: 00 = Data record 01 = End of file record 02 = Segment address record 04 = Extended linear address record (INHX32) HHHH....HH 2-Digit data blocks CC 2-Digit checksum. Two’s complement of the sum of all preceding bytes in the data record except the colon (start character). INHX8M The data record is output as described above. INHX32 The extended linear address record is output to establish upper 16 bits of data address. DS51464C-page 74 © 2006 Microchip Technology Inc.

MPLAB PM3 (cid:150) MPLAB IDE Reference 7.8 UPGRADING THE MPLAB PM3 OPERATING SYSTEM It may be necessary to upgrade the MPLAB PM3 operating system if: (cid:149) MPLAB IDE indicates that there is a newer version of the MPLAB PM3 operating system when attempting to enable MPLAB PM3 If Automatic Update is enabled (see Section7.5.5(cid:147)Configuration Tab(cid:148)), the follow- ing message will appear in the Output window if an upgrade is found: An upgrade for your MPLAB PM3 has been detected and is being downloaded now. If Automatic Update is disabled, the following message will appear in a message box with Yes and No options: An upgrade for your MPLAB PM3 has been detected. Would you like to upgrade now? Select Yes to update or No to not allow the update. When updating the operating system, MPLAB PM3 may click or beep a couple times while MPLAB IDE is updating the programmer. (cid:147)Downloading xx to MPLAB PM3: nn% Completed(cid:148) is displayed and continually updated in the bottom of the Output window, where (cid:147)xx(cid:148) is either the BIOS, Operating System or Database and (cid:147)nn(cid:148) is a number between 0 and 100. (cid:147)Downloading Now(cid:148) is displayed on the MPLAB PM3 LCD, along with an activity indicator in the top right corner of the LCD. Downloading may take a couple of minutes. When the upgrade is complete, the (cid:147)Download Complete(cid:148) message will display in the Output window. The MPLAB PM3 programmer is now ready to use. The updated version of the operating system is in the MPLAB PM3 directory. The latest version of MPLAB IDE, which contains the latest MPLAB PM3 operating system can be obtained from our web site at www.microchip.com. Click Development Tools and find MPLAB PM3 listed under Hardware. Near the bottom of the MPLAB PM3 page find the latest operating system update. © 2006 Microchip Technology Inc. DS51464C-page 75

MPLABfi PM3 User(cid:146)s Guide NOTES: DS51464C-page 76 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 8. Stand-Alone Reference 8.1 INTRODUCTION This chapter describes how to use the MPLAB PM3 device programmer in Stand-Alone mode. The device programmer provides an LCD interface that gives you complete control over a programming session. Topics covered in this chapter include: (cid:149) MPLAB PM3 LCD and Keys (cid:149) Start-Up Sequence (cid:149) Main Menu (cid:149) Command Menu 8.2 MPLAB PM3 LCD AND KEYS The front panel of the programmer looks similar to Figure8-1. FIGURE 8-1: MPLABfi PM3 FRONT PANEL MPLAB fi PM3 Device Programmer LCD ICSP(cid:153) Connector LEDs M STATUS POWER ESC ENTER Socket Module Connectors Move Up Move Down 8.2.1 LCD The graphical LCD is a 128 x 64 pixel screen which displays information on a blue background. The selection bar highlights the entire line. When you press <Enter> on a line ending with a right-pointing triangle, a submenu is displayed. When you press <Enter> on a line ending with two greater-than symbols (>>), the action is performed. © 2006 Microchip Technology Inc. DS51464C-page 77

MPLABfi PM3 User(cid:146)s Guide 8.2.2 Keys MPLAB PM3 provides four keys for navigation. The function of each key is: (cid:149) <ESC> (cid:150) return to the previous menu or entry. (cid:149) <Up> (cid:150) moves the selection bar up one line each time it is pressed. (cid:149) <Down> (cid:150) moves the selection bar down one line each time it is pressed. (cid:149) <Enter> (cid:150) performs the selected function. 8.3 START-UP SEQUENCE When power is applied to the MPLAB PM3 programmer, it initiates a start-up sequence. The system performs a self-check, briefly displays the splash screen, then the versions, followed by the MPLAB PM3 Main menu. If you do not get to the Main menu, see Appendix B.(cid:147)Troubleshooting(cid:148). Note: If you need to update the operating system, you will have to connect to a PC with MPLAB IDE running to accomplish this. Once the start-up sequence has completed, you will see the Main menu: 8.4 MAIN MENU The Main menu gives you these options: (cid:149) Recently Used (cid:149) Select Device (cid:149) Programmer Settings (cid:149) Help 8.4.1 Recently Used To display the most recently used devices: 1. Select (highlight) the (cid:147)Recently Used(cid:148) option and press <Enter>. Up to seven of the most recently used devices are listed. 2. To continue using this device, press <Enter>. 3. The system displays the Command menu. See Section8.5(cid:147)Command Menu(cid:148). 8.4.2 Select Device To select a specific device, you must: 1. Select (highlight) the (cid:147)Select Device(cid:148) option and press <Enter>. 2. Select the device family and press <Enter>. 3. Select the device and press <Enter>. 4. The system displays the Command menu. See Section8.5(cid:147)Command Menu(cid:148). 8.4.3 Programmer Settings From the Programmer Settings option on the Main menu, you can access: (cid:149) Screen Contrast (cid:149) Buzzer Volume (cid:149) Socket Information (cid:149) Checksum Calculation (cid:149) Device ID Option (Beta) (cid:149) Blank Check Override (cid:149) Go Pin Functionality DS51464C-page 78 © 2006 Microchip Technology Inc.

Stand-Alone Reference 8.4.3.1 SCREEN CONTRAST This option enables you to select the default, darker or lighter setting to adjust the con- trast on your screen. Sample text lines are provided so you can see the results of your selection. (cid:149) Normal (default) (cid:150) to reset the contrast to the default settings, select (cid:147)Default(cid:148) and press <Enter> once. (cid:149) Darker (cid:150) to increase the contrast, select (cid:147)Darker(cid:148) and press <Enter> until you achieve the desired contrast. (cid:149) Lighter (cid:150) to reduce the contrast, select (cid:147)Lighter(cid:148) and press <Enter> until you achieve the desired contrast. 8.4.3.2 BUZZER VOLUME This options enables you to select the volume of the buzzer tone. (cid:149) Loud (cid:150) to make the buzzer volume loud, select (cid:147)Loud(cid:148) and press <Enter>. (cid:149) Medium (default) (cid:150) to return to the default volume, select (cid:147)Default(cid:148) and press <Enter>. (cid:149) Low (cid:150) to make the buzzer volume low, select (cid:147)Low(cid:148) and press <Enter>. (cid:149) Mute (cid:150) to mute the buzzer volume, select (cid:147)Mute(cid:148) and press <Enter>. 8.4.3.3 SOCKET INFORMATION This option displays the socket part number and the socket ID of the socket module for the socket currently installed on MPLAB PM3. 8.4.3.4 CHECKSUM CALCULATION With this option, you can enable or disable calculating the checksum of a code-protected device. When you select this menu option from the Main menu, a message appears asking if you want to calculate the checksum, states the current setting and offers two options (see Figure8-2). FIGURE 8-2: CHECKSUM CALCULATION SCREEN Checksum Calculation --------------------------------------------------------- Would you like to calculate the Code Protected Checksum Currently: No Do Not Calculate >> Calculate Checksum >> The default setting is (cid:147)Do Not Calculate(cid:148). The setting is saved when the programmer is powered off. Selecting the Calculate Checksum option saves time when programming or verifying larger code-protected devices such as the PIC18F8720, since the entire device does not get re-read. If you set the checksum calculation option to (cid:147)Do Not Calculate(cid:148) and successfully program a code-protected device, the screen will display, (cid:147)Passed! Protected csum disabled(cid:148). If you set the checksum calculation option to (cid:147)Do Not Calculate(cid:148) and the program operation of a code-protected device fails, the screen will display, (cid:147)Failed! CP sum disabled(cid:148). © 2006 Microchip Technology Inc. DS51464C-page 79

MPLABfi PM3 User(cid:146)s Guide If you set the checksum calculation option to (cid:147)Calculate Checksum(cid:148) for a code- protected device, the checksum will be displayed with the results of a program or verify operation. 8.4.3.5 DEVICE ID OPTION (BETA) This option checks that the selected device is inserted in the socket module. When you select this menu option, a message appears asking if you want to check device IDs, states the current setting and offers two options (see Figure8-3). FIGURE 8-3: DEVICE ID OPTION SCREEN Device Id Option --------------------------------------------------------- Would you like to check device ids? Currently: No Test Device Ids >> Don’t Test Device Ids >> The default setting is (cid:147)Don(cid:146)t Test Device Ids(cid:148) ((cid:147)Currently: No(cid:148)). The setting is saved when the programmer is powered off. Selecting the (cid:147)Test Device Ids(cid:148) option verifies that the device selected through MPLAB PM3 matches the device installed in the socket module. This is helpful in avoid- ing programming the wrong device. The (cid:147)Currently:(cid:148) display changes to Yes when the (cid:147)Test Device Ids(cid:148) option is set. 8.4.3.6 BLANK CHECK OVERRIDE Selecting this option disables the Blank Check from occurring before programming an EEPROM or (cid:145)C(cid:146) device. When you select this menu option, a message appears asking if you want to override the Blank Check, states the current setting and offers two options (see Figure8-4). FIGURE 8-4: BLANK CHECK OVERRIDE SCREEN Blank Check Override --------------------------------------------------------- Blank check before programming ‘C’ devices? Currently: Yes Blank Check ‘C’ devices >> Override Blank Check >> The default setting is (cid:147)Blank Check (cid:145)C(cid:146) devices(cid:148) ((cid:147)Currently: Yes(cid:148)). The setting is saved when the programmer is powered off. Selecting the (cid:147)Override Blank Check(cid:148) enables programming C devices without first checking that they are blank. The (cid:147)Currently:(cid:148) display changes to No when the (cid:147)Override Blank Check(cid:148) option is set. This setting is used if the C device is preprogrammed, for example, with oscillator val- ues. In that case, if you performed a Blank Check, the device would fail because MPLAB PM3 would detect the preprogrammed settings. Using the override setting is helpful in those situations. DS51464C-page 80 © 2006 Microchip Technology Inc.

Stand-Alone Reference 8.4.3.7 GO PIN FUNCTIONALITY This option allows the user to change the functionality of the go pin. When you select this menu option, a message appears with the current setting and offers four options (see Figure8-5). FIGURE 8-5: GO PIN FUNCTIONALITY SCREEN Go Pin Functionality --------------------------------------------------------- Currently: as Program Verify Use as PgmVfy (default) >> Use as Verify >> Use as Erase >> Use as Blank Check >> The default setting is (cid:147)Use as PgmVfy(cid:148) ((cid:147)Currently: as Program Verify(cid:148)). The setting is saved when the programmer is powered off. This feature is especially useful on the production line where speed in processing a device is required. It enables repeated operations to be performed on devices as they are automatically loaded/unloaded into the programmer. Each time the device is loaded, the Go pin is activated and the preset operation is performed. Option Action Use as PgmVfy Programs and verifies device Use as Verify Verifies device Use as Erase Erases device Use as Blank Check Blank checks device The (cid:147)Currently:(cid:148) display changes to reflect the selected option. 8.4.4 Help This option displays the version number of the MPLAB PM3 OS Suite running on MPLAB PM3. It also contains these submenu options: (cid:149) ICSP Connector Pinout (cid:150) displays a diagram of the ICSP connector and has an option to view the pin definitions. The definition for all the ICSP pins are listed with the number, color and signal. See SectionA.4.1(cid:147)ICSP Header and Cable Pinout(cid:148). (cid:149) Status Bar Icons (cid:150) displays these icons and definitions: - I (cid:150) ICSP Mode - T (cid:150) Target is powered - V (cid:150) LVP Program Entry - Q (cid:150) SQTP file is loaded - O (cid:150) Options Set - R (cid:150) Ranges/Regions Set (cid:149) About (cid:150) displays the name of the product and the manufacturer and has an option to view the versions. The versions for MPLAB PM3-related programs is listed. © 2006 Microchip Technology Inc. DS51464C-page 81

MPLABfi PM3 User(cid:146)s Guide 8.5 COMMAND MENU After a device is selected, the device programmer displays the Command menu: (cid:149) Program Verify Device (cid:149) Verify Device (cid:149) All Functions The functions on the Command menu allow you to perform the basic user tasks for programming a microcontroller device. Pressing <ESC> repeatedly will return you to the Main menu. 8.5.1 Program Verify Device The Program Verify Device option erases (if Flash device), programs and verifies the device (see Section8.5.3.7(cid:147)Settings(cid:148)). 8.5.2 Verify Device The Verify Device option verifies that the device was programmed properly. 8.5.3 All Functions The All Functions option displays a submenu with the selections listed in Table8-1: TABLE 8-1: ALL FUNCTIONS MENU Selection Description Read Device Reads the device content. Selective read (e.g., part of program memory, only Configuration bits of the device) can be done by setting up Settings below. Program Verify Device Programs and verifies the device. Verify Device Verifies that the device was programmed properly. Blank Check Device Checks that the device is completely blank (all bits are set to (cid:145)1(cid:146)). This will also check that all Configuration bits are set to (cid:145)1(cid:146) (unprogrammed state). Erase Device Erases the device in the MPLABfi PM3 device programmer. This option displays only for erasable devices. Device Information Displays the device name, Device ID, Device Revision, Last Checksum and the User IDs. Settings Sets up program/verify options, ICSP(cid:153) settings, adjust voltages, reset voltages, reset statistics count and safe mode. 8.5.3.1 READ DEVICE If you want to copy firmware from a programmed device into an unprogrammed device, you can read the programmed firmware into MPLAB PM3 memory, then program the new device based on this information. Select (cid:147)Read Device(cid:148) to copy the contents of the device in the socket module into the internal memory of the device programmer. For PIC16CXX devices, the device programmer will ask the question: (cid:147)Code Protect Parts?(cid:148) Answer (cid:147)Yes(cid:148) to code-protect the parts that you will be programming. Code protection will remain effective until a new device is read. Answer (cid:147)No(cid:148) to program devices exactly as read. After reading a device, the device programmer displays a checksum. If the device is code-protected, a code protection message will be displayed prior to the read. Answer (cid:147)Yes(cid:148) to continue. Answer (cid:147)No(cid:148) to return to the Command menu. DS51464C-page 82 © 2006 Microchip Technology Inc.

Stand-Alone Reference 8.5.3.2 PROGRAM VERIFY DEVICE To program a device, select (cid:147)Program Verify Device(cid:148) and press <Enter>. This command programs the device in the socket module with the contents of the internal memory of the device programmer (image). For non-Flash devices, the device programmer checks to see if the installed microcontroller device is blank. If the device is not blank, the device programmer asks if you want to continue. Answer (cid:147)Yes(cid:148) to continue. Answer (cid:147)No(cid:148) to return to the Command menu. The device programmer programs the contents of its memory into the microcontroller device loaded in the socket module. If a hex file is not loaded into the device program- mer, an event message is displayed, (cid:147)Valid image not present! Please download an image or use a master device before continuing.(cid:148) You must have an image in the device programmer in order to program a device. To load a hex file into MPLAB PM3, you must connect the device programmer to a PC or read from a master device. See Section5.2.2(cid:147)Downloading a Hex File into MPLAB PM3 Memory(cid:148). After programming a device without errors, the device programmer performs a check to verify the data programmed into the device and returns the results of the verification. For the installed device, the device programmer performs the verification at the VDD Minimum and VDD Maximum voltages for non-Flash devices or VDD Nominal for Flash devices. The device programmer reports programming errors and verify errors according to where the error occurred. Errors are reported for program, Configuration bits, EEPROM data memory and ID locations. Only the first location to fail in each region is displayed. The address, expected value and read value are displayed. After programming, the device programmer displays the checksum. 8.5.3.3 VERIFY DEVICE To verify a device, select (cid:147)Verify Device(cid:148) and press <Enter>. The device programmer compares the contents of its internal memory to the contents of the programmed micro- controller device loaded in the socket module. If the data and Configuration bit settings are correct, (cid:147)PASSED!(cid:148) and the checksum will display on the LCD. The device programmer performs the verification at the VDD Minimum and VDD Maximum voltages for non-Flash devices and VDD Nominal for Flash devices. The device programmer reports errors according to which part of the device failed. Only the first location to fail in each region is displayed. The address, expected value and read value are displayed. 8.5.3.4 BLANK CHECK DEVICE To perform a Blank Check, select (cid:147)Blank Check Device(cid:148) and press <Enter>. This check will verify that the device is completely blank (all bits are set to (cid:145)1(cid:146)) and all Configuration bits are set to (cid:145)1(cid:146) (unprogrammed state). When completed, the programmer LCD dis- plays (cid:147)Device Blank.(cid:148) Only the first location to fail in each region is displayed. The address, expected value and read value are displayed. An OTP device cannot be erased and reprogrammed. If the EPROM device is not blank, you will have to erase it before programming, or select another device: 1. Remove any labels covering the device window. If you do not have a windowed device, you cannot reprogram it. A windowed version of all EPROM devices may be ordered by requesting the JW package. 2. Place the device in an Ultraviolet (UV) EPROM Eraser. The amount of time required to completely erase a UV erasable device depends on: the wavelength of the light, its intensity, distance from UV source and the process technology of © 2006 Microchip Technology Inc. DS51464C-page 83

MPLABfi PM3 User(cid:146)s Guide the device (how small the memory cells are). 3. Before attempting to program the device, perform the Blank Check again to verify that it is blank. Note: If the device is EEPROM or Flash, you do not have to erase it before reprogramming it. These devices are electrically erased before programming. 8.5.3.5 ERASE DEVICE To erase a Flash device, select All Functions>Erase Device, press <Enter>. Press <Enter> a second time to erase the device. When completed, the LCD displays (cid:147)Done.(cid:148) 8.5.3.6 DEVICE INFORMATION To display device information, select All Functions>Device Information and press <Enter>. The system displays the device ID, device revision, last checksum and user ID. It also contains an option for (cid:147)Check Code Protect(cid:148). To check if the device is code-protected, press <Enter>. 8.5.3.7 SETTINGS To display the Settings option, select All Functions>Settings and press <Enter>. The Settings option contains a submenu with the following options: (cid:149) Pgm/Vfy Settings (cid:149) ICSP Settings (cid:149) Adjust Voltages (cid:149) Reset Voltages (cid:149) Reset Statistics Count (cid:149) Safe Mode 8.5.3.7.1 Pgm/Vfy Settings (cid:149) Memory Ranges (cid:150) Displays the memory ranges selected for the device as retrieved from an environment. (cid:149) Select Regions (cid:150) Toggles the Yes/No settings for programming Program Memory, EEPROM, IDs, and Configuration bits. (cid:149) Program Options (cid:150) Toggles the Yes/No settings for the program options to (cid:147)Erase before Pgm(cid:148) and (cid:147)Preserve EEPROM(cid:148). (cid:149) Reset to Defaults (cid:150) Restores the default ranges, regions and options settings for the selected device. DS51464C-page 84 © 2006 Microchip Technology Inc.

Stand-Alone Reference 8.5.3.7.2 ICSP Settings These options will be available only if the selected device supports ICSP. 1. ICSP Power Source (cid:150) MPLAB PM3 displays the current ICSP power source and provides two options: (cid:149) Power from MPLAB PM3 (cid:150) programming the device will be powered through MPLAB PM3. (cid:149) Target has own supply (cid:150) programming the device will be powered from the target(cid:146)s own power supply. 2. ICSP Programming Mode (cid:150) MPLAB PM3 displays the current ICSP program mode voltage criteria and provides two options: (cid:149) MCLR High Voltage (cid:150) utilizes MCLR high voltage for programming the device. (cid:149) PGM Pin (LVP) (cid:150) utilizes the low voltage programming pin for program- ming the device. 8.5.3.7.3 Adjust Voltages This option enables you to adjust the VDD nominal, VDD APP and VPP for a Flash device and VDD Max, VDD Min, VDD Nominal and VPP for an EEPROM device. Each option displays the current setting and enables you to select (cid:147)Up(cid:148) or (cid:147)Down(cid:148). Each time you press <Enter> the voltage setting is adjusted up or down by 0.125. 8.5.3.7.4 Reset Voltages To reset the voltages, select All Functions>Settings>Reset Voltages and press <Enter>. This command resets the voltages to the default voltages. 8.5.3.7.5 Reset Statistics Count To reset all the program statistics, select All Functions>Settings>Reset Statistics Count and press <Enter>. This command will reset the counters to zero. 8.5.3.7.6 Safe Mode Safe mode was designed to prevent operational errors during production. When in Safe mode, the only functions that are allowed are Program and Verify. If any other buttons are pressed, a message is displayed stating that the system is in Safe mode and the operation is not allowed. Requesting other functions in MPLAB IDE when MPLAB PM3 is connected to the PC will deactivate Safe mode. To enter Safe mode, select All Functions>Settings>Safe Mode and press <Enter>. In Safe mode, only Program and Verify options on the Command menu are available. After Safe mode is implemented, you will be sent to the Command menu. © 2006 Microchip Technology Inc. DS51464C-page 85

MPLABfi PM3 User(cid:146)s Guide NOTES: DS51464C-page 86 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Chapter 9. MPLAB PM3 Card Reference 9.1 INTRODUCTION This chapter explains how to use the MPLAB PM3 Card in the MPLAB PM3 device programmer. The MPLAB PM3 Card can be accessed through the MPLAB IDE soft- ware and directly in the MPLAB PM3 programmer in Stand-Alone mode. This chapter covers only those commands specifically for the MPLAB PM3 Card. For other MPLAB IDE commands, refer to Chapter 7.(cid:147)MPLAB PM3 (cid:150) MPLAB IDE Reference(cid:148). For other Stand-Alone mode commands, refer to Chapter 8.(cid:147)Stand-Alone Reference(cid:148). Topics covered in this chapter include: (cid:149) MPLAB PM3 Card (cid:149) MPLAB PM3 Card Through MPLAB IDE (cid:149) MPLAB PM3 Card in Stand-alone Mode 9.2 MPLAB PM3 CARD The MPLAB PM3 Card is a memory device that fits in the SD-MMC port on the back of the MPLAB PM3 programmer (see Figure9-1). The card only fits into the slot one way. It can be used to store Environments that can be transferred to and from the MPLAB PM3 programmer. FIGURE 9-1: BACK VIEW OF MPLABfi PM3 Power On Power Off Secure Digital/ Power Input USB Port Serial Port Multi-Media Card Port PWR I O USB SD-MMC RS-232 For a list of Microchip tested and recommended cards, refer to the Readme for MPLAB PM3. 9.3 MPLAB PM3 CARD THROUGH MPLAB IDE The MPLAB IDE Programmer menu contains two options for use with the MPLAB PM3 Card: (cid:149) Environment (cid:150) displays a submenu of operations that can be performed on the environment. (cid:149) MPLAB PM3 Card (cid:150) displays a submenu of operations that pertain to the MPLAB PM3 Card. © 2006 Microchip Technology Inc. DS51464C-page 87

MPLABfi PM3 User(cid:146)s Guide 9.3.1 Environment Select Programmer>Environment to display the submenu options (Figure9-2). FIGURE 9-2: ENVIRONMENT SUBMENU The Environment option on the MPLAB IDE Programmer menu offers several operations that can be performed through MPLAB IDE: (cid:149) Save (cid:149) Copy (cid:149) View (cid:149) Load (cid:149) Delete DS51464C-page 88 © 2006 Microchip Technology Inc.

MPLAB PM3 Card Reference 9.3.1.1 SAVE This options enables you to save an Environment to the MPLAB PM3 Card, your hard drive or another location. Select Programmer>Environment>Save to open the Save Environment dialog (Figure9-3) and perform these steps: FIGURE 9-3: SAVE ENVIRONMENT DIALOG 1. In the (cid:147)Environment Name(cid:148) field, type a name (maximum 127 characters) for the Environment you wish to save. 2. If an SQTP file is specified for the device in the Programmer>Settings>SQTP dialog, then the SQTP file name will appear in the (cid:147)SQTP File(cid:148) field. The file must be generated and loaded into MPLAB IDE before saving the Environment. This is a display-only field, type cannot be entered into this field. 3. In the optional (cid:147)Misc. Files(cid:148) field, click Browse or type the file name(s) to add files you wish to save with the Environment. If typing the file name, the full path must be specified. Multiple files must be separated by a comma. A maximum number of 10 miscellaneous files (.txt, .hex, etc.) can be saved in an Environment. 4. In the optional Description field, type a brief description of the Environment. 5. Click Browse to open the Environment Destination window (Figure9-4). MPLAB PM3 must be enabled for the MPLAB PM3 Card to appear in the Environment Destination window. © 2006 Microchip Technology Inc. DS51464C-page 89

MPLABfi PM3 User(cid:146)s Guide FIGURE 9-4: ENVIRONMENT DESTINATION WINDOW 6. Select the MPLAB PM3 Card to save the Environment to the MPLAB PM3 Card, or select another destination to save it to another location. Click OK to close the Environment Destination window and return to the Save Environment dialog. 7. In the Save Environment dialog, the (cid:147)Destination(cid:148) field will display the selected location. Click Save to save the Environment. Click Close to close the dialog. The Output window displays a message confirming the Environment has been saved. Note: In order to save the Environment, the MPLAB PM3 Card must be inserted in the programmer. 9.3.1.2 COPY This option enables you to create a copy of the Environment so you can store it, use it in another location, or create a new Environment based on this Environment. Select Programmer>Environment>Copy to open the Copy Environment dialog (Figure9-5). This command copies an Environment from one location to another, for example, from the MPLAB PM3 Card to your hard drive. Use these steps to copy an Environment: FIGURE 9-5: COPY ENVIRONMENT DIALOG DS51464C-page 90 © 2006 Microchip Technology Inc.

MPLAB PM3 Card Reference 1. In the Environment Source field, click Browse to open the Select Environment window (Figure9-6). FIGURE 9-6: SELECT ENVIRONMENT WINDOW 2. Locate and select the *.pm3 file you wish to copy and click OK. (You may have to expand the directories to locate the file you want.) The Select Environment window closes and returns you to the Copy Environment dialog. The location now displays in the (cid:147)Environment Source(cid:148) field. 3. In the (cid:147)Environment Destination(cid:148) field, click Browse to open the Environment Destination window (Figure9-4). 4. Select the destination location where you wish to copy the Environment. Click OK, then Close to return to the Copy Environment dialog. The location now displays in the (cid:147)Environment Destination(cid:148) field. 5. Click Copy to perform the operation, then click Close. A message displays in the Output window confirming the environment was copied. When an Environment is copied, the Environment file and any other associated files are copied. A folder of the same name as the Environment file is created in the destination directory and the associated files are placed in the folder. © 2006 Microchip Technology Inc. DS51464C-page 91

MPLABfi PM3 User(cid:146)s Guide 9.3.1.3 VIEW Use this option to view an Environment before loading, copying or other functions. Select Programmer>Environment>View to open the View Environment window (Figure9-7). Use this dialog to view or load environments. FIGURE 9-7: VIEW ENVIRONMENT WINDOW 1. Select the Environment (*.pm3) you wish to view and click OK. (You may need to expand the directories to display the file.) The system closes the View Environment window and displays the selected Environment (see example in Figure9-8). FIGURE 9-8: EXAMPLE OF VIEWING AN ENVIRONMENT 2. From here, either click Close or, to load the viewed Environment into MPLAB IDE, click Load. After the load is complete, a message displays in the Output window. DS51464C-page 92 © 2006 Microchip Technology Inc.

MPLAB PM3 Card Reference 9.3.1.4 LOAD This option load the Environment file from the MPLAB PM3 Card into the MPLAB PM3 Programmer. Select Programmer>Environment>Load to open the Load Environment window (Figure9-9). FIGURE 9-9: LOAD ENVIRONMENT WINDOW Expand the directories to display the *.pm3 files to be loaded into MPLAB IDE and click OK. The Environment file is loaded into MPLAB IDE and a confirmation message is displayed in the Output window. © 2006 Microchip Technology Inc. DS51464C-page 93

MPLABfi PM3 User(cid:146)s Guide 9.3.1.5 DELETE This option deletes the selected Environment file from the specified location. If the directory is empty after deleting the environment file, the directory is also deleted. Select Programmer>Environment>Delete to open the Delete Environment window (Figure9-10). FIGURE 9-10: DELETE ENVIRONMENT WINDOW Expand the directories to display the *.pm3 file you wish to delete from the specified location and click OK. The environment, including any associated files, are deleted and a confirmation message is displayed in the Output window. If the directory is empty after deleting the Environment file, the directory is also deleted. 9.3.2 MPLAB PM3 Card When the MPLAB PM3 Card is inserted and MPLAB PM3 is enabled, these MPLAB PM3 Card options are available on the MPLAB IDE Programmer menu: (cid:149) List Files (cid:149) Format (cid:149) Properties DS51464C-page 94 © 2006 Microchip Technology Inc.

MPLAB PM3 Card Reference 9.3.2.1 LIST FILES This option enables all of the files in an Environment to be viewed so the files can be reviewed before performing another action, such as loading, copying or deleting. Select Programmer>MPLAB PM3 Card>List Files to open the List Files window (see example in Figure9-11). Expand the directories to display all the files. Click OK or Close after viewing the listing. FIGURE 9-11: LIST FILES WINDOW 9.3.2.2 FORMAT This option reformats MMC cards in the FAT16 format. If the card is not in FAT16 format, a warning message displays on the LCD screen: MPLAB PM3 only supports FAT16. Would you like to format now as FAT16? DATA WILL BE DESTROYED! Press <ENTER> to reformat a non-FAT16 card. For FAT16 cards, with the MPLAB PM3 Card inserted in the programmer, select Programmer>MPLAB PM3 Card>Format to open the Format PM3 Card dialog (Figure9-12). FIGURE 9-12: FORMAT PM3 CARD DIALOG Click OK to continue formatting the MPLAB PM3 Card or click Cancel. When formatting the MPLAB PM3 Card, all data is erased from the card. © 2006 Microchip Technology Inc. DS51464C-page 95

MPLABfi PM3 User(cid:146)s Guide 9.3.2.3 PROPERTIES This option lists information about the inserted MPLAB PM3 Card, including capacity, number of free bytes, used bytes and cluster size. Select Programmer>MPLAB PM3 Card>Properties to display the properties in the Output window (see example in Figure9-13). FIGURE 9-13: MPLABfi PM3 CARD PROPERTIES DS51464C-page 96 © 2006 Microchip Technology Inc.

MPLAB PM3 Card Reference 9.4 MPLAB PM3 CARD IN STAND-ALONE MODE There are two ways to access the MPLAB PM3 Card in through the MPLAB PM3 programmer in Stand-Alone mode: (cid:149) through the MPLAB PM3 Card Menu from the Main menu (cid:149) through the All Functions Menu after a device is selected 9.4.1 MPLAB PM3 Card Menu In Stand-Alone mode, with the MPLAB PM3 Card inserted, the Main menu has several options: (cid:149) Recently Used (see Section8.4.1(cid:147)Recently Used(cid:148)) (cid:149) Select Device (see Section8.4.2(cid:147)Select Device(cid:148)) (cid:149) MPLAB PM3 Card (cid:149) Programmer Settings (see Section8.4.3(cid:147)Programmer Settings(cid:148)) (cid:149) Help (see Section8.4.4(cid:147)Help(cid:148)) After you select the MPLAB PM3 Card from the Main menu, the device programmer displays the MPLAB PM3 Card command menu: (cid:149) Load an Environment (cid:149) View an Environment (cid:149) View Disk Contents (cid:149) Open a Text File (cid:149) Card Properties The functions on the Command menu allow you to perform the basic user tasks for programming a microcontroller device. Pressing <ESC> repeatedly will return you to the Main menu. 9.4.1.1 LOAD AN ENVIRONMENT The Load an Environment option loads the Environment into the MPLAB PM3 programmer from the MPLAB PM3 Card. The Environment includes the associated BIN file, the memory, voltage, ICSP settings and the optional SQTP file. Note: Program ranges, erase options and memory region settings are not used in Stand-Alone mode. 9.4.1.2 VIEW AN ENVIRONMENT The View an Environment option displays the contents and settings of an Environment. You can only view the Environment using this option. 9.4.1.3 VIEW DISK CONTENTS The View Disk Contents option displays the contents of the MPLAB PM3 Card inserted in the MPLAB PM3 programmer. Directories (designated with a folder icon) can be expanded further by pressing <ENTER>. 9.4.1.4 OPEN A TEXT FILE The Open a Text File (*.txt) option displays the first couple hundred characters of a text file. 9.4.1.5 CARD PROPERTIES Displays the card(cid:146)s byte capacity, bytes free, bytes used and cluster size. © 2006 Microchip Technology Inc. DS51464C-page 97

MPLABfi PM3 User(cid:146)s Guide 9.4.2 All Functions Menu Once a device is selected, the device(cid:146)s menu is displayed: (cid:149) Program Verify Device (see Section8.5.1(cid:147)Program Verify Device(cid:148)) (cid:149) Verify Device (see Section8.5.2(cid:147)Verify Device(cid:148)) (cid:149) All Functions When the MPLAB PM3 Card is inserted, the All Functions option displays a submenu with the selections listed in Table9-1. Note that there is an additional option for the MPLAB PM3 Card at the end of the list. For all other functions listed, refer to Section8.5.3(cid:147)All Functions(cid:148). TABLE 9-1: ALL FUNCTIONS MENU Selection Description Read Device Reads the device content. Selective read (e.g., part of program memory, only Configuration bits of the device) can be done by setting up Settings below. Program Verify Device Programs and verifies the device. Verify Device Verifies that the device was programmed properly. Blank Check Device Checks that the device is completely blank (all bits are set to (cid:145)1(cid:146)). This will also check that all Configuration bits are set to (cid:145)1(cid:146) (unprogrammed state). Erase Device Erases the device in the MPLABfi PM3 device programmer. This option displays only for erasable devices. Device Information Displays the device name, Device ID, Device Revision, Last Checksum and the User IDs. MPLAB PM3 Card Displays a submenu of operations that pertain to the MPLAB PM3 Card. Settings Sets up program/verify options, ICSP(cid:153) settings, adjust voltages, reset voltages, reset statistics count and Safe mode. The MPLAB PM3 Card function displays these options: TABLE 9-2: MPLABfi PM3 CARD FUNCTIONS Load an Environment Loads the Environment into the MPLAB PM3 programmer from the MPLAB PM3 Card View an Environment The View an Environment option displays the contents and settings of an Environment. You can only view the Environment using this option. Card Properties Displays the card(cid:146)s byte capacity, bytes free, bytes used and byte cluster. DS51464C-page 98 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Appendix A. Hardware Specifications A.1 INTRODUCTION This appendix describes MPLAB PM3 to PC connections, programmer hardware and socket module hardware. Contents of this appendix include: (cid:149) Connecting to a PC via the Serial Port (cid:149) Programmer Specifications (cid:149) ICSP Hardware Specifications (cid:149) Socket Module Specifications A.2 CONNECTING TO A PC VIA THE SERIAL PORT MPLAB PM3 interfaces to the PC via a standard RS-232 port with a DB9 connector. The unit defaults to a 57.6K baud rate. Serial port communications are as follows: (cid:149) 57.6K (default) or 9.6K baud (PROCMD only) (cid:149) 8 data bits, 1 stop bit, no parity (cid:149) Hardware flow control TableA-1 gives the data for connecting the MPLAB PM3 programmer (9-pin straight-through) to a 25-pin serial port. Connect the corresponding terminals indicated on each line of the table. TABLE A-1: PC HOST TO MPLABfi PM3 SIGNALS 25-pin (PC-Host) 9-pin (MPLAB PM3) 2 TX 2 RX 3 RX 3 TX 20 DTR 4 DTR 7 Common 5 Common 6 DSR 6 +5 volts (pulled up) 4 RTS 7 CTS 5 CTS 8 RTS © 2006 Microchip Technology Inc. DS51464C-page 99

MPLABfi PM3 User(cid:146)s Guide A.3 PROGRAMMER SPECIFICATIONS This section discusses the following topics: (cid:149) Physical Dimensions and Layout (cid:149) General Specifications Note: Values are specified under normal operation and represent recommended operating conditions. Absolute maximum ratings have not been published at this time. A.3.1 Physical Dimensions and Layout The MPLAB PM3 device programmer has the physical dimensions of 8 3/8″ L x 6 5/16″W x 13/16″ H. Top and back views of the programmer are shown in FigureA-1 and FigureA-2, respectively. FIGURE A-1: MPLABfi PM3 TOP VIEW MPLABfi PM3 Device Programmer LCD ICSP Connector LEDs M STATUS POWER Socket Module Connectors ESC ENTER Keys/Buttons FIGURE A-2: MPLABfi PM3 BACK VIEW Power On Power Off Secure Digital/ Power Input USB Port Serial Port Multi-Media Card Port PWR I O USB SD-MMC RS232 DS51464C-page 100 © 2006 Microchip Technology Inc.

Hardware Specifications A.3.2 General Specifications TABLE A-2: GENERAL SPECIFICATIONS Component Description Power Supply 20.3W Dual Output +3.3VDC/5A, +5.0VDC/0.75A, w/ 5-pin Mini Din plug USB Cable USB A-B M-M cable, 6 feet Serial Cable RS-232 DB9 (1 end male, 1 end female) ICSP(cid:153) Cable 18″ 15-pin, 22 AWG Super Flex Stranded Series 200 wire leads with 2 x 7 keyed housing Pin Drivers 40 Universal pin drivers capable of supplying VDD, VPP, I/O, Ground Diagnostics Power supply, CPU’s, FPGA, CPLD A.4 ICSP HARDWARE SPECIFICATIONS This section covers: (cid:149) ICSP Header and Cable Pinout (cid:149) ICSP VDD/VPP Operating Characteristics (cid:149) MPLAB PM3 Handler Operating Characteristics A.4.1 ICSP Header and Cable Pinout MPLAB PM3 comes equipped with an ICSP pin header and cable. You can locate this under where a socket module would be installed. The header configuration can be found in FigureA-3 (viewed from above MPLAB PM3) and the cable color and signal designations are listed in TableA-3. FIGURE A-3: ICSP(cid:153) HEADER CONFIGURATION TABLE A-3: ICSP(cid:153) CABLE PINOUT Pin Color Signal 1 Violet CLK 2 Green PASS 3 Orange DATA 4 Brown FAIL 5 White LVP/Clock 6 Blue GO 7 Yellow VPP 8 Yellow VPP 9 Red VDD 10 White with blue stripe Test 11 Red VDD 12 Gray +5V 13 Black GND 14 Black GND © 2006 Microchip Technology Inc. DS51464C-page 101

MPLABfi PM3 User(cid:146)s Guide Information on using ICSP for a specific device is described in the device(cid:146)s programming specification. You can find programming specifications on the Microchip web site. Note: Since MPLAB PM3 has ICSP built-in, you cannot use the PRO MATE II ICSP Socket Module (AC04004) and the MPLAB PM3-to-PRO MATE II device adapter. A.4.2 ICSP VDD/VPP Operating Characteristics TABLE A-4: POWER VIA MPLABfi PM3 Parameter Value VPP Range 9-14V in 125 mV steps IPP Range 150 mA max VDD Range 2-5.5V in 125 mV steps IDD Range 500 mA max Protection Over Voltage Shutdown TABLE A-5: POWER VIA TARGET Parameter Value Target VDD Range 2-5.5V VPP Range 9-14V in 125 mV steps IPP -150 mA max Target VDD Range 2-5.5V Protection IPP Overcurrent Fuse, Over Voltage Shutdown Note: The use of any cable (other material, length...) other than the one provided with MPLAB PM3 unit may result in unreliable device programming. DS51464C-page 102 © 2006 Microchip Technology Inc.

Hardware Specifications TABLE A-6: ICSP(cid:153) I/O OPERATING CHARACTERISTICS Parameter Conditions VDD Min Max VDD Supply Voltage Range 2.00 5.50 VIH Minimum High-level Input Voltage 2.0 1.50 3.0 2.10 5.5 3.85 VIL Maximum Low-level Input Voltage 2.0 0.50 3.0 0.90 5.5 1.65 VOH Minimum High-level Output Voltage 2.0 1.90 @ IOH = -50 μA 3.0 2.90 4.5 4.40 VOL Maximum Low-level Output Voltage 2.0 0.10 @ IOL = 50 μA 3.0 0.10 4.5 0.10 IOH High-level Output Current 2.00 -50 μA 3.3 -4 mA 5.0 -8 mA IOL Low-level Output Current 2.00 -50 μA 3.3 -4 mA 5.0 -8 mA tR, tF Rise/Fall Times 50 nS tPD Propagation Delay Cl = 50 pF 1 nS 5.5 nS A.4.3 MPLAB PM3 Handler Operating Characteristics TABLE A-7: PASS/FAIL SIGNALS Parameter Conditions VCC Min Max VOH Minimum High-level Output Voltage 5.0 4.50 @ IOH = -5.2 mA VOL Maximum Low-level Output Voltage 5.0 0.26 @ IOL = 5.2 mA IOH High-level Output Current 5.0 -20 mA IOL Low-level Output Current 5.0 20 mA TABLE A-8: GO SIGNAL Parameter Conditions VCC Min Max VIH Minimum High-level Input Voltage 5.0 3.50 VIL Maximum Low-level Input Voltage 5.0 1.50 Note: The GO signal has internal 10K pull-up to +5.0V and a 0.1 μF cap to GND. © 2006 Microchip Technology Inc. DS51464C-page 103

MPLABfi PM3 User(cid:146)s Guide A.5 SOCKET MODULE SPECIFICATIONS This section discusses the following topics: (cid:149) Socket Specifications (cid:149) MPLAB PM3 Socket Module Insertion (cid:149) Compatibility with MPLAB PRO MATE II Socket Modules (cid:149) Socket Life Expectancy and Cleaning Method (cid:149) Typical Programming Times A.5.1 Socket Specifications TABLE A-9: SOCKET VDD/VPP OPERATING CHARACTERISTICS Parameter Value VPP Range 9-14V in 125 mV steps IPP Range 150 mA max VDD Range 2-5.5V in 125 mV steps IDD Range 500 mA max Protection Overcurrent Shutdown TABLE A-10: SOCKET I/O OPERATING CHARACTERISTICS Parameter Conditions VCC Min Max VCC Supply Voltage Range 2.00 5.50 VIH Minimum High-level Input Voltage 2.0 1.50 3.0 2.10 4.5 3.15 5.5 3.85 VIL Maximum Low-level Input Voltage 2.0 0.50 3.0 0.90 4.5 1.35 5.5 1.65 VOH Minimum High-level Output Voltage 2.0 1.90 @ IOH = -50 μA 3.0 2.90 VOL Maximum Low-level Output Voltage 2.0 0.10 @ IOL = 50 μA 3.0 0.10 4.5 0.10 IOH High-level Output Current 1.65 -4 mA 2.3 -8 mA 3.0 -24 mA 4.5 -32 mA IOL Low-level Output Current 1.65 4 mA 2.3 8 mA 3.0 24 mA 4.5 32 mA DS51464C-page 104 © 2006 Microchip Technology Inc.

Hardware Specifications A.5.2 MPLAB PM3 Socket Module Insertion MPLAB PM3 utilizes socket modules to accommodate various Microchip devices. MPLAB PM3 socket modules have two interface connectors on the programmer. (FigureA-4). FIGURE A-4: SOCKET MODULE ALIGNMENT Socket Module Programmer A.5.3 Compatibility with MPLAB PRO MATE II Socket Modules MPLAB PM3 can accept PRO MATE II socket modules with the use of an adapter module. CAUTION Do not attempt to connect the PRO MATE II ICSP socket module to MPLAB PM3. A.5.4 Socket Life Expectancy and Cleaning Method Microchip uses socket modules from several manufacturers. TableA-11 gives the expected life (in number of automatic insertions) and cleaning method for each socket module as reported by the manufacturer. TABLE A-11: SOCKET LIFE EXPECTANCY AND CLEANING METHOD Manufacturer Insertions Cleaning Method Aries 10,000 None AMP (18 pin) 25,000 None 3M Textool 10,000 Methyl Alcohol Yamaichi 25,000 Methyl Alcohol A.5.4.1 MANUFACTURER All sockets (except Yamaichi) are labeled with the manufacturer(cid:146)s name. Identify a Yamaichi socket by looking for the letters IC51(cid:150) (as the prefix to a part number) on the socket. © 2006 Microchip Technology Inc. DS51464C-page 105

MPLABfi PM3 User(cid:146)s Guide A.5.4.2 INSERTIONS The expected life for manual insertions has been found to be less than the manufac- turer(cid:146)s reported number. The number of manual insertions depends on the socket condition and how often the socket is cleaned. Careless insertions or dirty socket conditions can bring the number of insertions down to less than 5,000. Cleanliness and care in inserting devices into a socket are most important with surface mount devices because the socket contacts must remain planar to function properly. Any bent or nonplanar contacts will result in a failure. Nonplanar socket module contacts occur earlier in the life of a socket module when devices are inserted manually into a socket module. Early contact failure from manual insertions is due to the non repeatability of the manual insertion method. Therefore, the listed number of insertions might not be reached for sockets if devices are inserted manually. No good method exists to ensure that the contacts are planar. A.5.4.3 CLEANING METHOD (cid:150) METHYL ALCOHOL Clean with methyl alcohol, then blow off the contacts with dry compressed air. DANGER Methyl alcohol is highly flammable. Use methyl alcohol in a well ventilated area away from sparks, flames or any other source of ignition. Methyl alcohol is poisonous and may cause blindness if taken internally. Avoid inhaling methyl alcohol vapor. A.5.5 Typical Programming Times TableA-12 shows typical programming times for MPLAB PM3 when used in Stand-Alone mode. Results may vary when programming through MPLAB IDE. TABLE A-12: TYPICAL PROGRAMMING TIMES IN STAND-ALONE MODE Device Programming Time PIC12F675 4 seconds PIC16F877A 5 seconds PIC16F819 4 seconds PIC18F452 7 seconds PIC16F88 3.7 seconds PIC16C55A 2.5 seconds PIC17C44 10 seconds PIC12C509 4 seconds PIC16F77 6.6 seconds PIC16F877 37 seconds PIC18F8720 24 seconds DS51464C-page 106 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Appendix B. Troubleshooting B.1 INTRODUCTION The troubleshooting information in this chapter can help you resolve typical problems or obstacles in programming microcontroller devices. Topics covered in this appendix: (cid:149) Troubleshooting Hardware (cid:149) Troubleshooting Operational Problems (cid:149) Troubleshooting Software (cid:149) Common Problems (cid:149) Error Messages (cid:150) PC (cid:149) Error Messages (cid:150) LCD (cid:149) Limitations B.2 TROUBLESHOOTING HARDWARE Some problems involving the hardware include: (cid:149) Communication Failure (cid:149) Ensuring Proper Socket Module Contact (cid:149) Socket Module Failure B.2.1 Communication Failure Appendix A.(cid:147)Hardware Specifications(cid:148) gives the data for connecting the MPLAB PM3 Device Programmer to a communications port. If communication fails, check your communications port. B.2.2 Ensuring Proper Socket Module Contact After changing a socket, insert a blank device and do a Blank Check to ensure the socket is making proper contact. A blank device will show erased. An improperly seated module socket may cause a device to fail the Verify process with errors claiming that the bad data is all zeros (0000). B.2.3 Socket Module Failure If you can program a master chip, and if you can read and try to program code-protected chips, but the chips fail the programming attempts, then potential socket pin damage may be the cause of the problem. Contact your Microchip Field Application Engineer (FAE) if your socket module is not operating properly. © 2006 Microchip Technology Inc. DS51464C-page 107

MPLABfi PM3 User(cid:146)s Guide B.3 TROUBLESHOOTING OPERATIONAL PROBLEMS Problems involving the basic operation of MPLAB PM3 include: (cid:149) Reading a Device Master in Stand-Alone Mode (cid:149) Device Pin Damage B.3.1 Reading a Device Master in Stand-Alone Mode When reading a device master in Stand-Alone mode, the Device Programmer asks the question: (cid:147)Code Protect Parts(cid:148) being programmed. Answer Yes to code-protect the parts that you will be programming. B.3.2 Device Pin Damage On the smaller device packages (SSOP, PQFP and SOIC) the pins can bend easily and cause problems in programming the devices. B.4 TROUBLESHOOTING SOFTWARE Some problems involving the software include: (cid:149) Establishing Communication with MPLAB PM3 (cid:149) No MPLAB PM3 Menu Visible (cid:149) Default Serial Port (cid:149) Operating System Update Needed B.4.1 Establishing Communication with MPLAB PM3 MPLAB IDE attempts to establish communication with MPLAB PM3 when you enable the programmer. If communication cannot be established, no programming can occur. A dialog box appears if the attempt to establish communication fails. If you encounter communications problems, review the following information. B.4.1.1 SERIAL PORT COMMUNICATIONS 1. Windows 98 and Windows 2000 require special attention when setting up COM ports. If you suspect a driver-hardware incompatibility, try changing Flow Control to Hardware and/or turning off the FIFO for the serial port. This is done in the Control Panel. In Windows 98, click the System Icon. Click the Device Manager tab and click Ports. If necessary, expand the Ports selection by clicking the ’+’ sign next to it. Double click the I/O port that MPLAB PM3 is connected to. This is where you can set flow control to Hardware. To turn off FIFO, click the Advanced button, dese- lect the Use FIFO box and click OK. Restart the PC. 2. In Windows 2000, click the System Icon. Click the Hardware tab and click the Device Manager button. If necessary, expand the Ports selection by clicking the ’+’sign next to it. Double click the I/O port that MPLAB PM3 is connected to. This is where you can set flow control to Hardware. To turn off FIFO, click the Port Settings tab and click the Advanced button. Deselect the Use FIFO box and click OK. Restart the PC. 3. Make sure that the RS-232 cable is connected, the power supply is connected and the power switch on MPLAB PM3 is on. 4. Try connecting MPLAB PM3 to a different serial port. If your PC has a 25-pin serial port, you will need a 25-to-9 serial port adapter. DS51464C-page 108 © 2006 Microchip Technology Inc.

Troubleshooting 5. Make sure that a COM port is properly set up exclusively for use by MPLAB PM3. Check the resources to ensure they are operating properly and that there are no conflicts with other devices. This commonly happens when you have a modem or other serial device that is improperly configured. Consult your Windows man- ual or other reference literature. You can try removing, reconfiguring or disabling the conflicting device, but do so only if you are familiar with those procedures. 6. Some system errors are caused by driver and hardware incompatibility. 7. You must use the Microsoft Windows communications driver that is native to the version of Windows that you use. 8. Make sure you are not using a third party communications driver. Open your SYSTEM.INI file and look for the line in the [OPTIONS] section that reads COMM.DRV=COMM.DRV If this line reads differently, you are using a different communications driver. B.4.2 No MPLAB PM3 Menu Visible If you have been using another programmer (e.g., PICSTART Plus), the MPLAB PM3 menu might not be available. Select Programmer>Select Programmer to open the Select Programmer dialog and choose MPLAB PM3 from the list. After you select the programmer, MPLAB IDE will issue you a warning prompt and shut itself down. MPLAB IDE must be restarted before the programmer options are available. The MPLAB PM3 menu will appear on the menu bar when MPLAB IDE is restarted. B.4.3 Default Serial Port MPLAB PM3 uses COM1 as the default serial port the first time you run MPLAB PM3. If you change your serial port selection with the Programmer>Communications Port Setup command, then the next time you run MPLAB PM3, the host software will use the same serial port used in the previous session. B.4.4 Operating System Update Needed If the device you selected when setting up the development mode in MPLAB IDE is not supported by the MPLAB PM3 Operating System, a message box will appear when you try to enable the programmer. Make sure you allow MPLAB PM3 to upgrade to get the latest versions for MPLAB IDE software and MPLAB PM3 operating system (Section7.8(cid:147)Upgrading the MPLAB PM3 Operating System(cid:148)). © 2006 Microchip Technology Inc. DS51464C-page 109

MPLABfi PM3 User(cid:146)s Guide B.5 COMMON PROBLEMS Some common problems you may have include: (cid:149) Failure to Establish Communication with Programmer (cid:149) Advanced Serial Communications Help (cid:149) Device Pin Damage (see SectionB.3.2(cid:147)Device Pin Damage(cid:148)) (cid:149) No Programmer Options Visible (see SectionB.4.2(cid:147)No MPLAB PM3 Menu Visible(cid:148)) (cid:149) MPLAB PM3 Card Option Not Available on Programmer Menu B.5.1 Failure to Establish Communication with Programmer MPLAB IDE attempts to establish communication with the programmer upon Enable Programmer selection. If communication cannot be established, no programming can occur. If the attempt to establish communication fails, it is reported in the Output window. (cid:149) General Communications Troubleshooting (cid:149) Serial Communications (cid:149) USB Communications B.5.1.1 GENERAL COMMUNICATIONS TROUBLESHOOTING 1. Check that the RS-232 or USB cable is connected securely to MPLAB PM3 and the host computer. 2. Check that the power supply is connected and the power LED on the programmer is on. 3. Make sure you are not using a third party communications driver. Open your SYSTEM.INI file and look for the line in the [OPTIONS] section that reads: COMM.DRV=COMM.DRV If this line reads differently you are using a different communications driver. B.5.1.2 SERIAL COMMUNICATIONS 1. Windows COM port setup requires special attention. If you suspect a driver-hardware incompatibility, try changing Flow Control to Hardware and/or turning off the FIFO for the serial port. This is done in the Control Panel. In Windows 98/ME, click the System Icon. Click the Device Manager tab, and click Ports. If necessary, expand the Ports selection by clicking the (cid:145)+(cid:146) sign next to it. Double click the I/O port to which the programmer is connected. This is where you can set flow control to Hardware. To turn off FIFO, click the Advanced button, deselect the Use FIFO box and click OK. Reboot the PC to implement the change. In Windows NT, click the Ports Icon. Select the COM port, click Settings and then click the Advanced button. Deselect the FIFO box, and click OK. Reboot the PC to implement the change. In Windows 2000/XP, click the System Icon. Click the Hardware tab, and click the Device Manager button. If necessary, expand the Ports selection by clicking the (cid:145)+(cid:146) sign next to it. Double click the I/O port to which the programmer is connected. This is where you can set flow control to Hardware. To turn off FIFO, click the Port Settings tab, and click the Advanced button. Deselect the Use FIFO box, and click OK. Reboot the PC to implement the change. DS51464C-page 110 © 2006 Microchip Technology Inc.

Troubleshooting 2. Make sure that a COM port is properly set up exclusively for use by the program- mer. Check the resources to ensure they are operating properly and that there are no conflicts with other devices. This commonly happens when you have another device that is improperly configured. Consult your Windows manual or other reference literature. You can try removing, reconfiguring or disabling the conflicting device, but do so only if you are familiar with those procedures. 3. Some system errors are caused by driver and hardware incompatibility. 4. Try connecting the programmer to a different serial port. If your PC has a 25-pin serial port, you will need a 25-to-9 serial port adapter. 5. Check that the device is plugged into the demo board/target application correctly; e.g., all pins are plugged into the socket and the device is correctly oriented. For more information, see SectionB.5.2(cid:147)Advanced Serial Communications Help(cid:148). B.5.1.3 USB COMMUNICATIONS 1. Make sure you used the MPLAB IDE supplied USB driver for MPLAB ICD 2. CAUTION If the Windows OS picked a USB driver, MPLAB ICD 2 will not work and you will not be able to install the proper driver. 2. Make sure USB is selected on the Programmer>Settings Communications tab. B.5.2 Advanced Serial Communications Help Here are some areas that can cause problems: (cid:149) Modem Interaction (cid:149) Problems with a Serial Mouse (cid:149) Interrupt Conflicts (cid:149) Third Party Communications Drivers (cid:149) Manually Setting Up The Port B.5.2.1 MODEM INTERACTION The programmers cannot be on the same communications port or the same interrupt as a modem. You can try disabling the modem in software, moving one or the other to a different communications port or removing the modem. B.5.2.2 PROBLEMS WITH A SERIAL MOUSE If you have a serial mouse, make sure you are not accidentally specifying that communications port as your programmer port. B.5.2.3 INTERRUPT CONFLICTS Make sure that your system has no interrupt conflicts. That is, make sure that only one device is using each interrupt. On Windows 98/ME, select Settings>Control Panel from the Start menu. Select System and click on the Device Manager tab. Expand the Ports selection and make sure there are no conflict indicators. On Windows NT/2000/XP, select Settings>Control Panel from the Start menu. Select System and double click on Ports. Click on a COM port from the list and then click Settings. In the Settings dialog, click Advanced. Make sure there are no IRQ conflicts. © 2006 Microchip Technology Inc. DS51464C-page 111

MPLABfi PM3 User(cid:146)s Guide B.5.2.4 THIRD PARTY COMMUNICATIONS DRIVERS The programmers are designed to run with the drivers shipped with the Windows operating system. Third party drivers may or may not work. Check your SYSTEM.INI file. Under [OPTIONS] you should have a line that reads: COMM.DRV=COMM.DRV If this line reads differently, you are using a third party driver. B.5.2.5 MANUALLY SETTING UP THE PORT On some systems, the programmer is unable to set up the communications port. It must be set up manually. On Windows 98/ME, select Settings>Control Panel from the Start menu. Select System and click on the Device Manager tab. Expand the Ports selection and double click on the port you are trying to use. Click the Port Settings tab, and select 57600 baud, 8 data bits, no parity, 1 stop bit and hardware flow control. Click Advanced. Uncheck the (cid:147)Use FIFO buffers(cid:148) checkbox. Some systems have a problem with this. Reboot the PC to implement the change. On Windows NT, select Settings>Control Panel from the Start menu. Select System and double click on Ports. Click on a COM port from the list and then click Settings. In the Settings dialog, select 57600 baud, 8 data bits, no parity, 1 stop bit and hardware flow control. Click Advanced and uncheck the (cid:147)Use FIFO buffers(cid:148) checkbox. Reboot the PC to implement the change. On Windows 2000/XP, click the System Icon. Click the Hardware tab, and click the Device Manager button. If necessary, expand the Ports selection by clicking the ’+’ sign next to it. Double click the I/O port to which the programmer is connected. This is where you can set flow control to Hardware. To turn off FIFO, click the Port Settings tab, and click the Advanced button. Uncheck the (cid:147)Use FIFO buffers(cid:148) checkbox, and click OK. Reboot the PC to implement the change. B.5.3 MPLAB PM3 Card Option Not Available on Programmer Menu In order for the MPLAB PM3 Card options to be available on the MPLAB IDE Program- mer menu, the MPLAB PM3 Card must be inserted in the MPLAB PM3 Programmer, the programmer must be powered on and the programmer must be enabled through MPLAB IDE. If the card is not supported, the MPLAB PM3 Card will not appear on the Programmer menu. (See the Readme for MPLAB PM3 for a list of recommended cards.) DS51464C-page 112 © 2006 Microchip Technology Inc.

Troubleshooting B.6 ERROR MESSAGES (cid:150) PC These are some error messages you may receive: (cid:149) Could Not Open the Communications Port (cid:149) USB Communication Could Not Be Established (cid:149) Device is Code-Protected (cid:149) Parity Error Found in Program Memory (cid:149) Program Memory Contains Code-Protected Data (cid:149) Invalid Checksum B.6.1 Could Not Open the Communications Port If the communications port cannot be opened, it is either because another application has opened the port, or the port does not exist. Make sure the port number is valid and that no other application is using it, such as another instance of MPLAB IDE. B.6.2 USB Communication Could Not Be Established If, while MPLAB PM3 is enabled using USB, the MPLAB PM3 unit is powered off and on quickly or power is temporarily interrupted, to reestablish USB communications, you must: (cid:149) Make sure the MPLAB PM3 power switch is off. (cid:149) Deselect MPLAB PM3 as the current programmer (Programmer>Select Programmer>None). (cid:149) Turn the MPLAB PM3 power back on. (cid:149) Reselect MPLAB PM3 as the programmer (Programmer>Select Programmer> MPLAB PM3). (cid:149) Enable the MPLAB PM3 programmer (Programmer>Enable Programmer). Wait 10 seconds for Windows to recognize it. If it doesn(cid:146)t work, restart the PC or try connecting to a different USB root hub. B.6.3 Device is Code-Protected If you attempt to read a code-protected device, you will get this warning. Obtain the original hex code from a file or a non-protected device. Also see SectionB.6.5(cid:147)Program Memory Contains Code-Protected Data(cid:148). B.6.4 Parity Error Found in Program Memory Several devices have a Configuration bit to request the calculation of parity. When the bit is set to (cid:147)ON,(cid:148) the contents of the program memory are compared and assigned (cid:147)even(cid:148) or (cid:147)odd(cid:148) parity. When set to (cid:147)OFF,(cid:148) the device does not perform a comparison. On a blank device, the parity Configuration bit is set to (cid:147)ON(cid:148) by default. If the device is programmed with the parity Configuration bit set to (cid:147)ON,(cid:148) any reprogramming of the device may result in a parity error being displayed. This occurs because a mismatch has been detected between the current parity and the parity last programmed. Receiving a parity error, however, does not stop the device from being programmed. However, if the device is programmed with the parity bit set to (cid:147)OFF,(cid:148) no comparison of the program memory contents for parity will take place. The device can be reprogrammed without receiving a message regarding parity. All OTP devices, including those that have the parity Configuration bit, cannot successfully reprogram any bit value of (cid:145)0(cid:146) to a (cid:145)1(cid:146). If a device has been programmed with the parity Configuration bit set to (cid:147)OFF,(cid:148) the parity checking cannot be turned back to (cid:147)ON.(cid:148) A blank device will have to be used. © 2006 Microchip Technology Inc. DS51464C-page 113

MPLABfi PM3 User(cid:146)s Guide B.6.5 Program Memory Contains Code-Protected Data Program memory contains data that was read from a code-protected device. Most or all of this data is not usable. Obtain the original hex code from a file or a non-protected device. See also SectionB.6.3(cid:147)Device is Code-Protected(cid:148). B.6.6 Invalid Checksum This error indicates a hardware problem occurred while trying to read from the programmer. It is not a very common error. It usually indicates some sort of problem with the communication hardware on either the PC or the programmer. B.7 ERROR MESSAGES (cid:150) LCD B.7.1 BIOS Errors TABLE B-1: MPLABfi PM3 BEEP CODES Number Meaning Corrective Action of Beeps 1 Normal start up No action required. 2 CPLD Not Configured Reset and connect to MPLAB IDE. 3 Power Monitor Not Found Reset and connect to MPLAB IDE. 4 Display Not Found Reset the unit. If the problem persists, contact your field representative to SAR the unit. 5 Display Read Write Test Failure Reset the unit. If the problem persists, contact your field representative to SAR the unit. 6 FPGA Time-out Reset the unit. If the problem persists, contact your field representative to SAR the unit. DS51464C-page 114 © 2006 Microchip Technology Inc.

Troubleshooting TABLE B-2: BIOS ERROR CODES Error Definition Corrective Action Code 1 CPLD is Not Configured Reset and connect to MPLABfi IDE. 2 CPLD is Old Reset and connect to MPLAB IDE. 3 Flash is Missing Reset the unit. If the problem persists, contact your field representative to SAR the unit. 4 Flash is Crossed Incorrectly Reset the unit. If the problem persists, contact your field representative to SAR the unit. 5 FPGA Configuration has Reset and connect to MPLAB IDE. Time-out 6 FPGA Image is Missing Reset and connect to MPLAB IDE. 7 FPGA is Old Reset and connect to MPLAB IDE. 8 Power Monitor is Not Found Reset and connect to MPLAB IDE. 9 Power Monitor is Old Reset and connect to MPLAB IDE. 10 ICSP(cid:153) Monitor is Not Found Reset and connect to MPLAB IDE. 11 ICSP Monitor is Old Reset and connect to MPLAB IDE. 12 Failure on the Daughter Board Reset the unit. If the problem persists, contact your field representative to SAR the unit 13 USB is Not Found Reset and connect to MPLAB IDE. 14 USB is Old Reset and connect to MPLAB IDE. 15 Display was Not Found Reset the unit. If the problem persists, contact your field representative to SAR the unit 16 Memory Failure Reset the unit. If the problem persists, contact your field representative to SAR the unit 17 OS is Not Found Reset and connect to MPLAB IDE. 18 VDD is Over Current If programming using a socket module, verify that the proper part is selected and the part is inserted in the socket properly. 19 VPP is Over Current If programming using a socket module, verify that the proper part is selected and the part is inserted in the socket properly. 20 OS is Old Reset and connect to MPLAB IDE. 24 Clock is Missing Reset the unit. If the problem persists, contact your field representative to SAR the unit 25 Display Read Write Failure Reset the unit. If the problem persists, contact your field representative to SAR the unit 26 Power Monitor Can Not Ramp Ensure the target is disconnected from Up Voltages MPLAB PM3 and retry. If it passes, check the ICSP wiring. If it fails again, contact your field representative to SAR the unit. 27 Updating Failed Turn unit off. Check connections to PC. Make sure the appropriate port is selected and the proper drivers are installed. Restart and retry. © 2006 Microchip Technology Inc. DS51464C-page 115

MPLABfi PM3 User(cid:146)s Guide B.7.2 Additional Error Messages (cid:149) Hardware needs to be reconfigured. Please attach to PC and connect through MPLAB IDE to update [error number] (cid:150) BIOS needs to download a newer version of some firmware. (cid:149) Fatal Error: Hardware not found. Contact your local field office for assistance [error number] (cid:150) Cannot read a piece of hardware. (cid:149) Fatal Error: Memory Failure. Contact your local field office for assistance. [error number] (cid:150) Memory test failed. B.7.3 LCD Version Screen On system boot-up, the version screen is displayed. Bios Version………………………………………………[ver] OS Version……………………………………………………[ver] Supervisor Version………………………………[ver] Memory Controller Version……………[ver] HS Shifter Version………………………………[ver] Daughter Board Version……………………[ver] USB EEPROM Version………………………………[ver] Database Version……………………………………[ver] No Calibration Required! B.8 LIMITATIONS B.8.1 General Limitations (cid:149) View the (cid:147)Readme for MPLAB PM3.txt(cid:148) file for a list of currently supported devices. (cid:149) Program memory ranges that are not code-protected may only be changed from a (cid:145)1(cid:146) to a (cid:145)0(cid:146). Most devices need to be erased before they can be reprogrammed. DataEE does not need to be erased before it is programmed; however, it is programmed one location at a time. For more information, consult the specific programming specification for your device. (cid:149) Some devices program multiple locations at once. MPLAB PM3 therefore inhibits programming ranges not aligned to these bounds. See individual programming specifications for more information. B.8.2 Device-Specific Limitations In addition to the general limitations listed above, some PICmicro MCUs may have device-specific limitations. Select the device family limitations listed below, or search for your device in the index. B.8.2.1 MPLAB PM3 LIMITATIONS FOR PIC18C601/801 (cid:149) Your own memory read/write routines must be used for these ROMless devices. B.8.2.2 MPLAB PM3 LIMITATIONS FOR ALL DEVICES (cid:149) For ICSP you must connect the AVDD and AVSS pins in addition to the VDD and VSS pins for the device to program. DS51464C-page 116 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Glossary Absolute Section A section with a fixed (absolute) address that cannot be changed by the linker. Access Memory (PIC18 Only) Special registers on PIC18XXXXX devices that allow access regardless of the setting of the Bank Select Register (BSR). Address Value that identifies a location in memory. Alphabetic Character Alphabetic characters are those characters that are letters of the arabic alphabet (a, b, (cid:133), z, A, B, (cid:133), Z). Alphanumeric Alphanumeric characters are comprised of alphabetic characters and decimal digits (0,1, (cid:133), 9). ANSI American National Standards Institute is an organization responsible for formulating and approving standards in the United States. Application A set of software and hardware that may be controlled by a PICmicro microcontroller. Archive A collection of relocatable object modules. It is created by assembling multiple source files to object files, then using the archiver to combine the object files into one library file. A library can be linked with object modules and other libraries to create executable code. Archiver A tool that creates and manipulates libraries. ASCII American Standard Code for Information Interchange is a character set encoding that uses 7 binary digits to represent each character. It includes upper and lower case letters, digits, symbols and control characters. Assembler A language tool that translates assembly language source code into machine code. Assembly Language A programming language that describes binary machine code in a symbolic form. Asynchronous Stimulus Data generated to simulate external inputs to a simulator device. Breakpoint, Hardware An event whose execution will cause a halt. © 2006 Microchip Technology Inc. DS51464C-page 117

MPLABfi PM3 User(cid:146)s Guide Breakpoint, Software An address where execution of the firmware will halt. Usually achieved by a special break instruction. Build Compile and link all the source files for an application. C A general purpose programming language which features economy of expression, modern control flow and data structures and a rich set of operators. Calibration Memory A Special Function Register or registers used to hold values for calibration of a PICmi- cro microcontroller on-board RC oscillator or other device peripherals. COFF Common Object File Format. An object file of this format contains machine code, debugging and other information. Command Line Interface A means of communication between a program and its user based solely on textual input and output. Compiler A program that translates a source file written in a high-level language into machine code. Configuration Bits Special-purpose bits programmed to set PICmicro microcontroller modes of operation. A Configuration bit may or may not be preprogrammed. Control Directives Directives in assembly language code that cause code to be included or omitted based on the assembly-time value of a specified expression. Cross Reference File A file that references a table of symbols and a list of files that references the symbol. If the symbol is defined, the first file listed is the location of the definition. The remaining files contain references to the symbol. Data Directives Data directives are those that control the assembler(cid:146)s allocation of program or data memory and provide a way to refer to data items symbolically; that is, by meaningful names. Data Memory On Microchip MCU and DSC devices, data memory (RAM) is comprised of General Purpose Registers (GPRs) and Special Function Registers (SFRs). Some devices also have EEPROM data memory. Device Programmer A tool used to program electrically programmable semiconductor devices such as microcontrollers. Directives Statements in source code that provide control of the language tool(cid:146)s operation. Download Download is the process of sending data from a host to another device, such as an emulator, programmer or target board. DS51464C-page 118 © 2006 Microchip Technology Inc.

Glossary EEPROM Electrically Erasable Programmable Read Only Memory. A special type of PROM that can be erased electrically. Data is written or erased one byte at a time. EEPROM retains its contents even when power is turned off. Emulation The process of executing software loaded into emulation memory as if it were firmware residing on a microcontroller device. Emulation Memory Program memory contained within the emulator. Emulator Hardware that performs emulation. Emulator System The MPLAB ICE 2000 and MPLAB ICE 4000 emulator systems include the pod, processor module, device adapter, cables and MPLAB IDE software. Environment A snapshot of the current programming settings. It contains all the necessary informa- tion to recreate the current programming state including links to the device(cid:146)s memory file, optional SQTP file and specific part information. EPROM Erasable Programmable Read Only Memory. A programmable read-only memory that can be erased usually by exposure to ultraviolet radiation. Event A description of a bus cycle which may include address, data, pass count, external input, cycle type (fetch, R/W) and time stamp. Events are used to describe triggers, breakpoints and interrupts. Export Send data out of MPLAB IDE in a standardized format. Extended Microcontroller Mode In Extended Microcontroller mode, on-chip program memory as well as external memory is available. Execution automatically switches to external if the program memory address is greater than the internal memory space of the PIC17CXXX or PIC18CXXX device. External Label A label that has external linkage. External Linkage A function or variable has external linkage if it can be referenced from outside the module in which it is defined. External Symbol A symbol for an identifier which has external linkage. This may be a reference or a definition. External Symbol Resolution A process performed by the linker in which external symbol definitions from all input modules are collected in an attempt to resolve all external symbol references. Any external symbol references which do not have a corresponding definition cause a linker error to be reported. © 2006 Microchip Technology Inc. DS51464C-page 119

MPLABfi PM3 User(cid:146)s Guide External Input Line An external input signal logic probe line (TRIGIN) for setting an event based upon external signals. External RAM Off-chip Read/Write memory. File Registers On-chip data memory, including General Purpose Registers (GPRs) and Special Function Registers (SFRs). Flash A type of EEPROM where data is written or erased in blocks instead of bytes. FNOP Forced No Operation. A forced NOP cycle is the second cycle of a two-cycle instruction. Since the PICmicro microcontroller architecture is pipelined, it prefetches the next instruction in the physical address space while it is executing the current instruction. However, if the current instruction changes the program counter, this prefetched instruction is explicitly ignored, causing a forced NOP cycle. GPR General Purpose Register. The portion of device data memory (RAM) available for general use. Halt A stop of program execution. Executing Halt is the same as stopping at a breakpoint. HEX Code Executable instructions stored in a hexadecimal format code. HEX code is contained in a HEX file. HEX File An ASCII file containing hexadecimal addresses and values (HEX code) suitable for programming a device. High-Level Language A language for writing programs that is further removed from the processor than assembly. ICD In-Circuit Debugger. MPLAB ICD and MPLAB ICD 2 are Microchip(cid:146)s in-circuit debuggers for PIC16F87X and PIC18FXXX devices, respectively. These ICDs work with MPLAB IDE. ICE In-Circuit Emulator. MPLAB ICE 2000 and 4000 are Microchip(cid:146)s in-circuit emulators that work with MPLAB IDE. IDE Integrated Development Environment. MPLAB IDE is Microchip(cid:146)s integrated development environment. Import Bring data into MPLAB IDE from an outside source, such as from a HEX file. Instruction Set The collection of machine language instructions that a particular processor understands. DS51464C-page 120 © 2006 Microchip Technology Inc.

Glossary Instructions A sequence of bits that tells a central processing unit to perform a particular operation and can contain data to be used in the operation. Internal Linkage A function or variable has internal linkage if it can not be accessed from outside the module in which it is defined. International Organization for Standardization An organization that sets standards in many businesses and technologies, including computing and communications. Interrupt A signal to the CPU that suspends the execution of a running application and transfers control to an Interrupt Service Routine (ISR) so that the event may be processed. Interrupt Handler A routine that processes special code when an interrupt occurs. Interrupt Request An event which causes the processor to temporarily suspend normal instruction execution and to start executing an interrupt handler routine. Some processors have several interrupt request events allowing different priority interrupts. Interrupt Service Routine User-generated code that is entered when an interrupt occurs. The location of the code in program memory will usually depend on the type of interrupt that has occurred. IRQ See Interrupt Request. ISO See International Organization for Standardization. ISR See Interrupt Service Routine. Librarian See Archiver. Library See Archive. Linker A language tool that combines object files and libraries to create executable code, resolving references from one module to another. Linker Script Files Linker script files are the command files of a linker. They define linker options and describe available memory on the target platform. Listing Directives Listing directives are those directives that control the assembler listing file format. They allow the specification of titles, pagination and other listing control. Listing File A listing file is an ASCII text file that shows the machine code generated for each C source statement, assembly instruction, assembler directive, or macro encountered in a source file. © 2006 Microchip Technology Inc. DS51464C-page 121

MPLABfi PM3 User(cid:146)s Guide Local Label A local label is one that is defined inside a macro with the LOCAL directive. These labels are particular to a given instance of a macro(cid:146)s instantiation. In other words, the symbols and labels that are declared as local are no longer accessible after the ENDM macro is encountered. Logic Probes Up to 14 logic probes can be connected to some Microchip emulators. The logic probes provide external trace inputs, trigger output signal, +5V and a common ground. Machine Code The representation of a computer program that is actually read and interpreted by the processor. A program in binary machine code consists of a sequence of machine instructions (possibly interspersed with data). The collection of all possible instructions for a particular processor is known as its (cid:147)instruction set(cid:148). Machine Language A set of instructions for a specific central processing unit, designed to be usable by a processor without being translated. Macro Macroinstruction. An instruction that represents a sequence of instructions in abbreviated form. Macro Directives Directives that control the execution and data allocation within macro body definitions. Make Project A command that rebuilds an application, re-compiling only those source files that have changed since the last complete compilation. MCU Microcontroller Unit. An abbreviation for microcontroller. Also uC. Message Text displayed to alert you to potential problems in language tool operation. A message will not stop operation. Microcontroller A highly integrated chip that contains a CPU, RAM, program memory, I/O ports and timers. Microcontroller Mode One of the possible program memory configurations of the PIC17CXXX and PIC18CXXX families of microcontrollers. In Microcontroller mode, only internal execution is allowed. Thus, only the on-chip program memory is available in Microcontroller mode. Microprocessor Mode One of the possible program memory configurations of the PIC17CXXX and PIC18CXXX families of microcontrollers. In microprocessor mode, the on-chip program memory is not used. The entire program memory is mapped externally. Mnemonics Text instructions that can be translated directly into machine code. Also referred to as Opcodes. DS51464C-page 122 © 2006 Microchip Technology Inc.

Glossary MPASM Assembler Microchip(cid:146)s relocatable macro assembler for PICmicro microcontroller devices, KEELOQfi devices and Microchip memory devices. MPLAB ASM30 Microchip(cid:146)s relocatable macro assembler for dsPIC30F digital signal controller devices. MPLAB C1X Refers to both the MPLAB C17 and MPLAB C18 C compilers from Microchip. MPLAB C17 is the C compiler for PIC17CXXX devices and MPLAB C18 is the C compiler for PIC18CXXX and PIC18FXXXX devices. MPLAB C30 Microchip(cid:146)s C compiler for dsPIC30F digital signal controller devices. MPLAB ICD 2 Microchip(cid:146)s in-circuit debugger for PIC16F87X, PIC18FXXX and dsPIC30FXXXX devices. The ICD works with MPLAB IDE. The main component of each ICD is the module. A complete system consists of a module, header, demo board, cables and MPLAB IDE Software. MPLAB ICE 2000 Microchip(cid:146)s in-circuit emulator for PICmicro MCU(cid:146)s that works with MPLAB IDE. MPLAB ICE 4000 Microchip(cid:146)s in-circuit emulator for dsPIC DSC(cid:146)s that works with MPLAB IDE. MPLAB IDE Microchip(cid:146)s Integrated Development Environment. MPLAB LIB30 MPLAB LIB30 archiver/librarian is an object librarian for use with COFF object modules created using either MPLAB ASM30 or MPLAB C30 C compiler. MPLAB LINK30 MPLAB LINK30 is an object linker for the Microchip MPLAB ASM30 assembler and the Microchip MPLAB C30 C compiler. MPLAB PM3 Microchip(cid:146)s production device programmer that works with MPLAB IDE in support of PICmicro MCU devices. It can be used with MPLAB IDE or as a stand-alone unit. MPLAB SIM Microchip(cid:146)s simulator that works with MPLAB IDE in support of PICmicro MCU devices. MPLAB SIM30 Microchip(cid:146)s simulator that works with MPLAB IDE in support of dsPIC DSC devices. MPLIB Object Librarian MPLIB librarian is an object librarian for use with COFF object modules created using either MPASM assembler (mpasm or mpasmwin v2.0) or MPLAB C1X C compilers. MPLINK Object Linker MPLINK linker is an object linker for the Microchip MPASM assembler and the Microchip MPLAB C17 or C18 C compilers. MPLINK linker also may be used with the Microchip MPLIB librarian. MPLINK linker is designed to be used with MPLAB IDE, though it does not have to be. © 2006 Microchip Technology Inc. DS51464C-page 123

MPLABfi PM3 User(cid:146)s Guide MRU Most Recently Used. Refers to files and windows available to be selected from MPLAB IDE main pull down menus. Nesting Depth The maximum level to which macros can include other macros. Node MPLAB IDE project component. Non Real-Time Refers to the processor at a breakpoint or executing single step instructions or MPLAB IDE being run in simulator mode. Nonvolatile Storage A storage device whose contents are preserved when its power is off. NOP No Operation. An instruction that has no effect when executed except to advance the program counter. Object Code The machine code generated by an assembler or compiler. Object File A file containing machine code and possibly debug information. It may be immediately executable or it may be relocatable, requiring linking with other object files, e.g. libraries, to produce a complete executable program. Object File Directives Directives that are used only when creating an object file. Off-Chip Memory Off-chip memory refers to the memory selection option for the PIC17CXXX or PIC18CXXX device where memory may reside on the target board, or where all program memory may be supplied by the Emulator. The Memory tab accessed from Options>Development Mode provides the Off-Chip Memory Selection dialog box. Opcodes Operational Codes. See Mnemonics. Operators Symbols, like the plus sign (cid:145)+(cid:146) and the minus sign (cid:145)-(cid:146), that are used when forming well-defined expressions. Each operator has an assigned precedence that is used to determine order of evaluation. OTP One Time Programmable. EPROM devices that are not in windowed packages. Since EPROM needs ultraviolet light to erase its memory, only windowed devices are erasable. Pass Counter A counter that decrements each time an event (such as the execution of an instruction at a particular address) occurs. When the pass count value reaches zero, the event is satisfied. You can assign the Pass Counter to break and trace logic, and to any sequential event in the complex trigger dialog. PC Personal Computer or Program Counter. DS51464C-page 124 © 2006 Microchip Technology Inc.

Glossary PC Host Any IBM or compatible personal computer running a supported Windows operating system. PICmicro MCUs PICmicro microcontrollers (MCUs) refers to all Microchip microcontroller families. PICSTART Plus A developmental device programmer from Microchip. Programs 8-, 14-, 28- and 40-pin PICmicro microcontrollers. Must be used with MPLAB IDE Software. Pod, Emulator The external emulator box that contains emulation memory, trace memory, event and cycle timers and trace/breakpoint logic. Power-on-Reset Emulation A software randomization process that writes random values in data RAM areas to simulate uninitialized values in RAM upon initial power application. PRO MATE II A device programmer from Microchip. Programs all PICmicro microcontrollers and most memory and Keeloq devices. Can be used with MPLAB IDE or stand-alone. Program Counter The location that contains the address of the instruction that is currently executing. Program Memory The memory area in a device where instructions are stored. Also, the memory in the emulator or simulator containing the downloaded target application firmware. Project A set of source files and instructions to build the object and executable code for an application. Prototype System A term referring to a user’s target application, or target board. PWM Signals Pulse Width Modulation Signals. Certain PICmicro MCU devices have a PWM peripheral. Qualifier An address or an address range used by the Pass Counter or as an event before another operation in a complex trigger. Radix The number base, HEX, or decimal, used in specifying an address. RAM Random Access Memory (Data Memory). Memory in which information can be accessed in any order. Raw Data The binary representation of code or data associated with a section. © 2006 Microchip Technology Inc. DS51464C-page 125

MPLABfi PM3 User(cid:146)s Guide Real-Time When released from the halt state in the emulator or MPLAB ICD mode, the processor runs in Real-Time mode and behaves exactly as the normal chip would behave. In Real-Time mode, the real-time trace buffer of MPLAB ICE is enabled and constantly captures all selected cycles, and all break logic is enabled. In the emulator or MPLAB ICD, the processor executes in real-time until a valid breakpoint causes a halt, or until the user halts the emulator. In the simulator real-time simply means execution of the microcontroller instructions as fast as they can be simulated by the host CPU. Recursion The concept that a function or macro, having been defined, can call itself. Great care should be taken when writing recursive macros; it is easy to get caught in an infinite loop where there will be no exit from the recursion. ROM Read Only Memory (Program Memory). Memory that cannot be modified. Run The command that releases the emulator from halt, allowing it to run the application code and change or respond to I/O in real time. Serialized Quick Turn Programming Serialization allows you to program a serial number into each microcontroller device that the Device Programmer programs. This number can be used as an entry code, password or ID number. SFR See Special Function Registers. Shell The MPASM assembler shell is a prompted input interface to the macro assembler. There are two MPASM assembler shells: one for the DOS version and one for the Windows version. Simulator A software program that models the operation of devices. Single Step This command steps though code, one instruction at a time. After each instruction, MPLAB IDE updates register windows, watch variables and status displays so you can analyze and debug instruction execution. You can also single step C compiler source code, but instead of executing single instructions, MPLAB IDE will execute all assembly level instructions generated by the line of the high-level C statement. Skew The information associated with the execution of an instruction appears on the processor bus at different times. For example, the executed Opcodes appears on the bus as a fetch during the execution of the previous instruction, the source data address and value and the destination data address appear when the Opcodes is actually executed and the destination data value appears when the next instruction is executed. The trace buffer captures the information that is on the bus at one instance. Therefore, one trace buffer entry will contain execution information for three instructions. The number of captured cycles from one piece of information to another for a single instruction execution is referred to as the skew. DS51464C-page 126 © 2006 Microchip Technology Inc.

Glossary Skid When a hardware breakpoint is used to halt the processor, one or more additional instructions may be executed before the processor halts. The number of extra instructions executed after the intended breakpoint is referred to as the skid. Source Code The form in which a computer program is written by the programmer. Source code is written in some formal programming language which can be translated into or machine code or executed by an interpreter. Source File An ASCII text file containing source code. Special Function Registers The portion of data memory (RAM) dedicated to registers that control I/O processor functions, I/O status, timers or other modes or peripherals. SQTP See Serialized Quick Turn Programming. Stack, Hardware Locations in PICmicro microcontroller where the return address is stored when a function call is made. Stack, Software Memory used by an application for storing return addresses, function parameters and local variables. This memory is typically managed by the compiler when developing code in a high-level language. Static RAM or SRAM Static Random Access Memory. Program memory you can Read/Write on the target board that does not need refreshing frequently. Status Bar The Status Bar is located on the bottom of the MPLAB IDE window and indicates such current information as cursor position, development mode and device and active tool bar. Step Into This command is the same as Single Step. Step Into (as opposed to Step Over) follows a CALL instruction into a subroutine. Step Over Step Over allows you to debug code without stepping into subroutines. When stepping over a CALL instruction, the next breakpoint will be set at the instruction after the CALL. If for some reason the subroutine gets into an endless loop or does not return properly, the next breakpoint will never be reached. The Step Over command is the same as Single Step except for its handling of CALL instructions. Stimulus Input to the simulator, i.e., data generated to exercise the response of simulation to external signals. Often the data is put into the form of a list of actions in a text file. Stimulus may be asynchronous, synchronous (pin), clocked and register. Stopwatch A counter for measuring execution cycles. © 2006 Microchip Technology Inc. DS51464C-page 127

MPLABfi PM3 User(cid:146)s Guide Symbol A symbol is a general purpose mechanism for describing the various pieces which comprise a program. These pieces include function names, variable names, section names, file names, struct/enum/union tag names, etc. Symbols in MPLAB IDE refer mainly to variable names, function names and assembly labels. The value of a symbol after linking is its value in memory. System Window Control The system window control is located in the upper left corner of windows and some dialogs. Clicking on this control usually pops up a menu that has the items (cid:147)Minimize,(cid:148) (cid:147)Maximize(cid:148) and (cid:147)Close.(cid:148) Target Refers to user hardware. Target Application Software residing on the target board. Target Board The circuitry and programmable device that makes up the target application. Target Processor The microcontroller device on the target application board. Template Lines of text that you build for inserting into your files at a later time. The MPLAB Editor stores templates in template files. Tool Bar A row or column of icons that you can click on to execute MPLAB IDE functions. Trace An emulator or simulator function that logs program execution. The emulator logs program execution into its trace buffer which is uploaded to MPLAB IDE(cid:146)s trace window. Trace Memory Trace memory contained within the emulator. Trace memory is sometimes called the trace buffer. Trigger Output Trigger output refers to an emulator output signal that can be generated at any address or address range and is independent of the trace and breakpoint settings. Any number of trigger output points can be set. Uninitialized Data Data which is defined without an initial value. In C, int myVar; defines a variable which will reside in an uninitialized data section. Upload The Upload function transfers data from a tool, such as an emulator or programmer, to the host PC or from the target board to the emulator. Warning An alert that is provided to warn you of a situation that would cause physical damage to a device, software file, or equipment. DS51464C-page 128 © 2006 Microchip Technology Inc.

Glossary Watch Variable A variable that you may monitor during a debugging session in a Watch window. Watch Window Watch windows contain a list of watch variables that are updated at each breakpoint. Watchdog Timer A timer on a PICmicro microcontroller that resets the processor after a selectable length of time. The WDT is enabled or disabled and set up using Configuration bits. WDT See Watchdog Timer. © 2006 Microchip Technology Inc. DS51464C-page 129

MPLABfi PM3 User(cid:146)s Guide NOTES: DS51464C-page 130 © 2006 Microchip Technology Inc.

MPLABfi PM3 USER(cid:146)S GUIDE Index B K Bin File.....................................................................50 Keys.........................................................................77 Binary File................................................................50 L C LCD..........................................................................77 CE Compliance..........................................................8 Loading an Environment..........................................52 Checksum................................................................39 M Communications Cable Installation.........................................................12 Memory Ranges.......................................................62 Microchip Internet Web Site.......................................5 RS-232..............................................................13 USB..................................................................13 MPASM Assembler..................................................10 MPLAB CXX.............................................................10 Configure Menu.......................................................56 Creating an Environment.........................................51 MPLAB Development Tools.....................................10 Customer Notification Service....................................5 MPLAB Editor...........................................................10 Customer Support......................................................6 MPLAB ICE..............................................................10 MPLAB IDE..........................................................9, 37 D Programmer Selection......................................17 Display.....................................................................77 Starting..............................................................16 Documentation MPLAB PM3 Conventions........................................................3 Back View...................................................12, 87 Layout.................................................................2 Powering Down.................................................16 Specifications..................................................100 E Top View...........................................................14 EEPROM/Flash........................................................41 MPLAB PM3 Card....................................................49 Enable MPLAB PM3................................................58 MPLAB PM3 Components.........................................8 Enabling MPLAB PM3.............................................20 MPLAB PM3 Programmer Menu..............................57 Environment (PM3).................................49, 50, 57, 87 MPLAB PM3 Socket Modules..................................14 Environment File......................................................50 MPLAB Projects.......................................................10 Erase Flash Device..................................................61 MPLAB SIM..............................................................10 F MPLIB Librarian.......................................................10 MPLINK Linker.........................................................10 Files Used by MPLAB PM3......................................74 Function Keys..........................................................77 N H Num File...................................................................50 Hardware Installation...............................................12 O Hexadecimal Record................................................74 Operation I With a PC............................................................9 Without a PC.................................................9, 45 ICSP....................................................................44, 72 ICSP Cable Installation............................................15 ICSP Hardware Specifications...............................101 Indicators Lights and Buzzer.............................................16 Installation Hardware..........................................................12 ICSP Cable.......................................................15 MPLAB PM3.....................................................11 Software............................................................11 USB Driver........................................................12 Internet Address.........................................................5 © 2006 Microchip Technology Inc. DS51464C-page 131

MPLABfi PM3 User(cid:146)s Guide P PICSTART Plus........................................................10 PM3 File...................................................................50 Power Supply Installing............................................................13 Powering Down MPLAB PM3.....................................................16 PRO MATE II Socket Modules.................................14 Program Memory Emulator............................................................59 Simulator...........................................................59 Program Memory Window........................................58 Programmer Menu Items..........................................57 Programming a Device.......................................37, 46 Push Buttons............................................................77 R Reading a Device.....................................................43 Reading, Recommended............................................4 Readme......................................................................4 RS-232...............................................................12, 67 S Saving an Environment............................................51 Selecting a Device...................................................20 Selecting the Programmer..................................17, 58 Serial Communications Cable..................................13 Serial Port................................................................13 Socket Cleaning Methods......................................106 Socket Life Expectancy..........................................105 Socket Module Installing......................................................14, 45 Software Installation.................................................11 SQTP...................................................................7, 43 Stand-Alone Mode...............................................9, 45 Starting MPLAB IDE.................................................16 Starting MPLAB PM3...............................................20 T Transfer from MPLAB PM3......................................61 Transfer to MPLAB PM3..........................................61 Troubleshooting.....................................................107 U USB Driver Installation.............................................12 V Verify........................................................................59 Voltages...................................................................63 W Warranty Registration.................................................4 Windowed Device.....................................................41 WWW Address...........................................................5 DS51464C-page 132 © 2006 Microchip Technology Inc.

Index NOTES: © 2006 Microchip Technology Inc. DS51464C-page 133

WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Australia - Sydney India - Bangalore Austria - Wels 2355 West Chandler Blvd. Tel: 61-2-9868-6733 Tel: 91-80-2229-0061 Tel: 43-7242-2244-399 Chandler, AZ 85224-6199 Fax: 61-2-9868-6755 Fax: 91-80-2229-0062 Fax: 43-7242-2244-393 Tel: 480-792-7200 China - Beijing India - New Delhi Denmark - Copenhagen Fax: 480-792-7277 Tel: 86-10-8528-2100 Tel: 91-11-5160-8631 Tel: 45-4450-2828 Technical Support: Fax: 86-10-8528-2104 Fax: 91-11-5160-8632 Fax: 45-4485-2829 http://support.microchip.com Web Address: China - Chengdu India - Pune France - Paris www.microchip.com Tel: 86-28-8676-6200 Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20 Fax: 86-28-8676-6599 Fax: 91-20-2566-1513 Fax: 33-1-69-30-90-79 Atlanta Alpharetta, GA China - Fuzhou Japan - Yokohama Germany - Munich Tel: 770-640-0034 Tel: 86-591-8750-3506 Tel: 81-45-471- 6166 Tel: 49-89-627-144-0 Fax: 770-640-0307 Fax: 86-591-8750-3521 Fax: 81-45-471-6122 Fax: 49-89-627-144-44 Boston China - Hong Kong SAR Korea - Gumi Italy - Milan Westborough, MA Tel: 852-2401-1200 Tel: 82-54-473-4301 Tel: 39-0331-742611 Tel: 774-760-0087 Fax: 852-2401-3431 Fax: 82-54-473-4302 Fax: 39-0331-466781 Fax: 774-760-0088 China - Qingdao Korea - Seoul Netherlands - Drunen Chicago Tel: 86-532-8502-7355 Tel: 82-2-554-7200 Tel: 31-416-690399 Itasca, IL Fax: 86-532-8502-7205 Fax: 82-2-558-5932 or Fax: 31-416-690340 Tel: 630-285-0071 China - Shanghai 82-2-558-5934 Spain - Madrid Fax: 630-285-0075 Tel: 86-21-5407-5533 Malaysia - Penang Tel: 34-91-708-08-90 Dallas Fax: 86-21-5407-5066 Tel: 60-4-646-8870 Fax: 34-91-708-08-91 Addison, TX China - Shenyang Fax: 60-4-646-5086 UK - Wokingham Tel: 972-818-7423 Tel: 86-24-2334-2829 Philippines - Manila Tel: 44-118-921-5869 Fax: 972-818-2924 Fax: 86-24-2334-2393 Tel: 63-2-634-9065 Fax: 44-118-921-5820 Detroit China - Shenzhen Fax: 63-2-634-9069 Farmington Hills, MI Tel: 86-755-8203-2660 Singapore Tel: 248-538-2250 Fax: 86-755-8203-1760 Tel: 65-6334-8870 Fax: 248-538-2260 China - Shunde Fax: 65-6334-8850 Kokomo Tel: 86-757-2839-5507 Taiwan - Hsin Chu Kokomo, IN Fax: 86-757-2839-5571 Tel: 886-3-572-9526 Tel: 765-864-8360 China - Wuhan Fax: 886-3-572-6459 Fax: 765-864-8387 Tel: 86-27-5980-5300 Taiwan - Kaohsiung Los Angeles Fax: 86-27-5980-5118 Tel: 886-7-536-4818 Mission Viejo, CA China - Xian Fax: 886-7-536-4803 Tel: 949-462-9523 Tel: 86-29-8833-7250 Taiwan - Taipei Fax: 949-462-9608 Fax: 86-29-8833-7256 Tel: 886-2-2500-6610 San Jose Fax: 886-2-2508-0102 Mountain View, CA Thailand - Bangkok Tel: 650-215-1444 Tel: 66-2-694-1351 Fax: 650-961-0286 Fax: 66-2-694-1350 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 10/31/05 DS51464C-page 134 © 2006 Microchip Technology Inc.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrochip: AC164350 AC164342