Microchip Development Systems Ordering Guide June 2005 © 2005 Microchip Technology Inc. DS30177T

Note the following details of the code protection feature on Microchip devices: (cid:129) Microchip products meet the specification contained in their particular Microchip Data Sheet. (cid:129) Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. (cid:129) There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. (cid:129) Microchip is willing to work with the customer who is concerned about the integrity of their code. (cid:129) Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is provided only for your convenience The Microchip name and logo, the Microchip logo, Accuron, and may be superseded by updates. It is your responsibility to dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART, ensure that your application meets with your specifications. PROMATE, PowerSmart, rfPIC, and SmartShunt are MICROCHIP MAKES NO REPRESENTATIONS OR WAR- registered trademarks of Microchip Technology Incorporated RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, in the U.S.A. and other countries. WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB, LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, PICMASTER, SEEVAL, SmartSensor and The Embedded MERCHANTABILITY OR FITNESS FOR PURPOSE. Control Solutions Company are registered trademarks of Microchip disclaims all liability arising from this information and Microchip Technology Incorporated in the U.S.A. its use. Use of Microchip’s products as critical components in Analog-for-the-Digital Age, Application Maestro, dsPICDEM, life support systems is not authorized except with express dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, written approval by Microchip. No licenses are conveyed, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial implicitly or otherwise, under any Microchip intellectual property Programming, ICSP, ICEPIC, Linear Active Thermistor, rights. MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance and WiperLock are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2005, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company’s quality system processes and procedures are for its PICmicro® 8-bit MCUs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS30177T-page ii © 2005 Microchip Technology Inc.

Table of Contents INTRODUCTION ........................................................................................................................1 About Microchip Development Tools ..........................................................................................................2 Microchip Technology Service and Support ................................................................................................2 Microchip Internet Connections ...................................................................................................................3 SOFTWARE ...............................................................................................................................5 MPLAB® Integrated Development Environment (IDE) ................................................................................6 MPLAB® IDE Visual Device Initializer Software ..........................................................................................7 Application Maestro™ Software ..................................................................................................................8 MPLAB® C18 C Compiler ...........................................................................................................................9 MPLAB® C30 C Compiler .........................................................................................................................10 dsPIC30F DSP Library ..............................................................................................................................11 dsPIC30F Math Library .............................................................................................................................12 dsPIC30F Peripheral Library .....................................................................................................................13 dsPIC30F Soft Modem Library ..................................................................................................................14 dsPIC30F Speech Recognition Library .....................................................................................................15 dsPIC30F Noise Suppression Library .......................................................................................................16 dsPIC30F Acoustic Echo Cancellation Library ..........................................................................................17 dsPIC® DSC Symmetric Key Embedded Encryption Library ....................................................................18 dsPIC® DSC Asymmetric Key Embedded Encryption Library ..................................................................19 dsPIC30F Speech Encoding/Decoding Library .........................................................................................20 dsPICworks™ Data Analysis and DSP Software ......................................................................................21 Digital Filter Design/Digital Filter Design Lite ............................................................................................22 CMX-MicroNet™ for dsPIC30F Devices ...................................................................................................23 CMX-RTX™ for dsPIC30F Devices ..........................................................................................................24 CMX-Scheduler™ for dsPIC® DSC Devices .............................................................................................25 CMX-Tiny+™ for dsPIC30F Devices ........................................................................................................26 FilterLab® Active Filter Software Design Tool ...........................................................................................27 Total Endurance™ Software Model ..........................................................................................................28 KEELOQ® Security ICs License CD ...........................................................................................................29 HARDWARE ............................................................................................................................31 MPLAB® ICD 2 In-Circuit Debugger .........................................................................................................32 MPLAB® ICD 2 Accessories .....................................................................................................................33 PICSTART® Plus Development Programmer ...........................................................................................34 PICkit™ 1 Flash Starter Kit .......................................................................................................................35 rfPIC® Development Kit 1 .........................................................................................................................36 PIC10F2XX Programmers/Adapters .........................................................................................................37 Signal Analysis PICtail™ Daughter Board ................................................................................................38 Ethernet PICtail™ Daughter Board ...........................................................................................................39 PICkit™ 2 Starter Kit .................................................................................................................................40 © 2005 Microchip Technology Inc. DS30177T-page iii

Development Systems Ordering Guide EMULATION ............................................................................................................................41 MPLAB® ICE 2000 Modular In-Circuit Emulator .......................................................................................42 MPLAB® ICE 4000 Modular In-Circuit Emulator .......................................................................................43 MPLAB® ICE 2000/4000 Replacement Accessories ................................................................................44 Ordering Information .................................................................................................................................45 PROGRAMMING .....................................................................................................................47 MPLAB® PM3 Universal Device Programmer ..........................................................................................48 In-Circuit Serial Programming™ (ICSP™) Socketfor PRO MATE® II Device Programmer ......................49 Programmer Adapter Kits and Accessories ..............................................................................................50 PICmicro® MCU DEMO BOARDS AND KITS ........................................................................51 PICDEM™ Demonstration Boards ............................................................................................................52 PICDEM™ 2 Plus Demonstration Board ...................................................................................................53 PICDEM™ 4 Demonstration Board ...........................................................................................................54 PICDEM™ 18R Demonstration Kit ...........................................................................................................55 PICDEM™ Mechatronics Demonstration Kit .............................................................................................56 PICDEM™ MC Development Board .........................................................................................................57 PICDEM™ MC LV Development Board ....................................................................................................58 PICDEM™ HPC Explorer Board ...............................................................................................................59 PICDEM™ USB Demonstration Kit ...........................................................................................................60 PICDEM™ FS USB Demonstration Board ................................................................................................61 PICDEM™ LCD Demonstration Board .....................................................................................................62 PICDEM™ Z 2.4 GHz Demonstration Kit ..................................................................................................63 PICDEM™ CAN-LIN Demonstration Boards ............................................................................................64 PICDEM™ LIN Demonstration Kit ............................................................................................................65 PICDEM.net™ Demonstration/Evaluation Board ......................................................................................66 Low-Power Solutions Demonstration Board .............................................................................................67 dsPIC® DSC DEVELOPMENT BOARDS, KITS .....................................................................69 dsPICDEM™ Starter Development Board ................................................................................................70 dsPICDEM™ 28-Pin Starter Development Board .....................................................................................71 dsPICDEM™ 1.1 General Purpose Development Board ..........................................................................72 dsPICDEM™ 2 Development Board .........................................................................................................73 dsPICDEM™ MC1 Motor Control Development Board .............................................................................74 dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards ......................................75 DS30177T-page iv © 2005 Microchip Technology Inc.

Table of Contents ANALOG AND MIXED-SIGNAL DEMO BOARDS AND KITS ...............................................77 PICDEM™ MSC1 Demonstration Kit ........................................................................................................78 PICDEM™ MSC1 Daughter Boards .........................................................................................................79 MCP41XXX/42XXX Digital Potentiometer Evaluation Board ....................................................................80 MXDEV® 1 Analog Evaluation System Driver Board ................................................................................81 MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit ....................................82 MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit ....................................83 Fan Controllers and Serial Temperature Sensor Demo Boards ...............................................................84 MCP2510 CAN Developer’s Kit ................................................................................................................85 MCP250XX CAN I/O Expander Developer’s Kit .......................................................................................86 MCP2120/2150 Infrared Developer’s Kit ...................................................................................................87 SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit ............................................................88 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360 .....................................89 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360 and MCRF45X ..................90 Interface Products .....................................................................................................................................91 Linear Products .........................................................................................................................................91 Linear Products (Cont.) .............................................................................................................................92 Mixed-Signal Products ..............................................................................................................................92 Power Management Products ...................................................................................................................93 Power Management Products (Cont.) .......................................................................................................93 Thermal Management Products ................................................................................................................94 Thermal Management Products (Cont.) ....................................................................................................94 Analog Software Tools ..............................................................................................................................95 KEELOQ® SECURITY ICs EVALUATION KIT .........................................................................97 KEELOQ® Security ICs Evaluation Kit II .....................................................................................................98 BATTERY MANAGEMENT .....................................................................................................99 PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell Lithium Ion/Polymer Chemistries ............................................................................................................100 PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell Lithium Ion/Polymer Chemistries ............................................................................................................101 CROSS REFERENCE ...........................................................................................................103 Index.......................................................................................................................................141 Worldwide Sales and Service ..............................................................................................146 © 2005 Microchip Technology Inc. DS30177T-page v

Development Systems Ordering Guide NOTES: DS30177T-page vi © 2005 Microchip Technology Inc.

INTRODUCTION This section contains the following major topics: About Microchip Development Tools...........................................................................................2 Microchip Technology Service and Support................................................................................2 Microchip Internet Connections...................................................................................................3 © 2005 Microchip Technology Inc. DS30177T-page 1

Development Systems Ordering Guide About Microchip Microchip Technology Development Tools Service and Support With more than 300,000 development tools installed Quality worldwide, Microchip is well known for the seamless integration of their tools with the intuitive MPLAB® Microchip Development Systems is continuously Integrated Development Environment (IDE), for the improving design and manufacturing processes to breadth of products that cover all stages of the product ensure high quality products. development cycle, and for the highest level of support Warranty and service. Microchip’s development tools provide faster time to market and lower total system cost for Development system products are warranted against engineers, clearly offering a competitive advantage to defects for one (1) year (90 days for products that we using Microchip silicon solutions. normally sell for $500 or less (USD), excluding promotional pricing). This ordering guide covers several new development tools, including the PICkit™ 2 Flash Starter Kit, the Upgrades PICDEM™ Z 2.4GHz Demonstration Kit, the PICDEM Software upgrades are available free-of-charge from Full-Speed USB Demonstration Board and the the Microchip web site (www.microchip.com). PICDEM HPC Explorer Board. For more detailed and Hardware enhancements are also available current information, please visit Microchip’s web site at free-of-charge or at a nominal fee. Contact your local www.microchip.com. distributor for more information. Service Prompt system service is essential as customers depend on our systems to design and program PICmicro® Microcontrollers and dsPIC® Digital Signal Controllers (DSC). Defective components are typically replaced within 48 hours. Microchip’s Service Center in Tempe, Arizona serves customers in the US and Canada. Our European Service Center in Dublin provides service to customers in Europe, the Middle East and Africa. The Far East sales offices provide these services directly. DS30177T-page 2 © 2005 Microchip Technology Inc.

Introduction Microchip Internet Connections On-Line Support The following are some of the many services available on the web site: Microchip provides many avenues of on-line support (cid:129) Latest data sheets, application notes and user on the Microchip web site at: manuals www.microchip.com (cid:129) Device errata Users may download files for the latest development (cid:129) Technical support section with FAQs tools, data sheets, application notes, user’s manuals, (cid:129) Device programming specifications articles and sample programs. Microchip-specific (cid:129) Latest file updates for demonstration and business information is also available, including evaluation kits contact information for all Microchip sales offices and (cid:129) Design tips distributors. (cid:129) Subscription to Microchip Change Notification The MPLAB® Integrated Development Environment service for silicon and development tools (IDE) software can be downloaded free-of-charge. (cid:129) Microchip consultant program member listing MPLAB IDE includes a project manager, assembler/ (cid:129) Third party tools contacts linker and simulator debugger for embedded system development. Additional tools are available for (cid:129) Web seminars purchase for device programming, in-circuit debugging, (cid:129) Listing of field seminars and upcoming events and C compiling. MPLAB IDE is the development (cid:129) Conferences for products, development systems, environment for most of the Microchip development technical information and more tools listed in this guide. (cid:129) University Corner Development tools, Microchip PICmicro® MCU (cid:129) Latest Microchip press releases devices, dsPIC® DSC devices, Analog/Interface and (cid:129) Job postings Memory devices are available on the web site for (cid:129) Links to other useful web sites related to Microchip purchase with a credit card and delivery in the U.S., products Canada or Europe. © 2005 Microchip Technology Inc. DS30177T-page 3

Development Systems Ordering Guide NOTES: DS30177T-page 4 © 2005 Microchip Technology Inc.

SOFTWARE This section contains the following major topics: MPLAB® Integrated Development Environment (IDE)................................................................6 MPLAB® IDE Visual Device Initializer Software..........................................................................7 Application Maestro™ Software..................................................................................................8 MPLAB® C18 C Compiler...........................................................................................................9 MPLAB® C30 C Compiler.........................................................................................................10 dsPIC30F DSP Library..............................................................................................................11 dsPIC30F Math Library.............................................................................................................12 dsPIC30F Peripheral Library.....................................................................................................13 dsPIC30F Soft Modem Library..................................................................................................14 dsPIC30F Speech Recognition Library.....................................................................................15 dsPIC30F Noise Suppression Library.......................................................................................16 dsPIC30F Acoustic Echo Cancellation Library..........................................................................17 dsPIC® DSC Symmetric Key Embedded Encryption Library....................................................18 dsPIC® DSC Asymmetric Key Embedded Encryption Library..................................................19 dsPIC30F Speech Encoding/Decoding Library.........................................................................20 dsPICworks™ Data Analysis and DSP Software......................................................................21 Digital Filter Design/Digital Filter Design Lite............................................................................22 CMX-MicroNet™ for dsPIC30F Devices...................................................................................23 CMX-RTX™ for dsPIC30F Devices..........................................................................................24 CMX-Scheduler™ for dsPIC® DSC Devices.............................................................................25 CMX-Tiny+™ for dsPIC30F Devices.........................................................................................26 FilterLab® Active Filter Software Design Tool ...........................................................................27 Total Endurance™ Software Model...........................................................................................28 KEELOQ® Security ICs License CD ...........................................................................................29 © 2005 Microchip Technology Inc. DS30177T-page 5

Development Systems Ordering Guide F R E E MPLAB® Integrated Development Environment (IDE) (cid:129) Source-Level Debugger (cid:129) On-line Help (cid:129) Project and Set-up Wizards (cid:129) Project Manager (cid:129) Visual Device Initializer (seepage 7) (cid:129) Programmer’s Editor (cid:129) Drivers for hardware tools (as listed in the Tools Supported section) (cid:129) Integration with Source Code Control The MPLAB IDE desktop provides the development environment and tools for developing and debugging applications as a project, providing a common user interface for different development and debugging modes. MPLAB IDE gives PICmicro® MCU and dsPIC® Features DSC users the flexibility to edit, compile and debug from a single user interface. (cid:129) Full featured, color-coded text editor MPLAB IDE gives PICmicro® MCU and dsPIC® DSC (cid:129) Easy-to-use project manager with visual display users the flexibility to edit, compile and debug from a (cid:129) Source-level debugging single user interface. MPLAB Integrated Development (cid:129) Enhanced source level debugging for ‘C’ Environment (IDE) is a development platform for the structures, automatic variables, etc. Microchip Technology PICmicro microcontroller (MCU) (cid:129) Customizable toolbar and key mapping and dsPIC Digital Signal Controller (DSC) families. (cid:129) Dynamic status bar displays processor condition Designed for use with the Microsoft Windows® at a glance operating environment, MPLAB IDE offers an (cid:129) Context sensitive, interactive on-line help easy-to-use common user interface for the Microchip (cid:129) Integrated MPLAB SIM instruction simulator development tools suite. (cid:129) Stand-alone user interface for MPLAB PM3 and MPLAB IDE includes the following components: PRO MATE® II device programmers (cid:129) MPASM™ Assembler (cid:129) User interface for MPLAB ICE 2000 or (cid:129) MPLAB ASM30 Assembler for dsPIC30F MPLAB ICE 4000 In-Circuit Emulator (cid:129) MPSIM™ Software Simulator (cid:129) User interface for MPLAB ICD 2 In-Circuit Debugger (cid:129) MPLINK™ Linker (cid:129) MPLAB LINK30 Linker for dsPIC30F Ordering Information: SW007002 MPLAB® IDE (Free download: www.microchip.com) DS51046 “MPLAB® IDE Integrated Development Environment Product Overview” (Available at: www.microchip.com) DS30177T-page 6 © 2005 Microchip Technology Inc.

Software F R E E MPLAB® IDE Visual Device Initializer Software MPLAB IDE Visual Device Initializer does extensive error checking on assignments and conflicts on pins, memories and interrupts, as well as a selection of operating conditions. The generated code files are seamlessly integrated with the rest of the application code through the MPLAB IDE project manager. The detailed reports on resource assignment and configuration simplify project documentation. Features (cid:129) Drag-and-drop feature selection (cid:129) One-click configuration (cid:129) Extensive error checking (cid:129) Generates initialization code Microchip’s MPLAB IDE Visual Device Initializer allows (cid:129) Integrates seamlessly in the MPLAB IDE project users to configure Microchip microcontrollers manager graphically, and when configuration is complete, a (cid:129) Printed reports ease project documentation mouse click generates code usable in Assembly or ‘C’ requirements programs. Ordering Information: Free download: www.microchip.com (included with MPLAB IDE download) DS51443 “MPLAB IDE Visual Device Initializer Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 7

Development Systems Ordering Guide F R E E Application Maestro™ Software The Microchip Application Maestro Software is a stand-alone software tool that allows users to configure and incorporate a range of pre-written firmware modules into their applications. Its heart is a collection of modules developed by Microchip Technology for use with its PICmicro® microcontrollers. Starting from a graphic interface, the user selects one or more available modules, then configures the parameters for each. When this is complete, the Application Maestro Software then generates code, that can be incorporated into the user’s application project, using MPLAB® IDE or any compatible development environment. It is important to note that the Application Maestro Software is not a plug-in or add-on to the MPLAB IDE line of development tools; it is a separate item in its own right. Application Maestro Software also differs from other librarian systems, such as MPLIB™ Library, because it does more than archive and manage related files for a single software project. Instead, it manages a library of ready-to-configure modules that the user customizes to their needs, and creates the necessary files for inclusion in the user’s projects on demand. Ordering Information: Free download: www.microchip.com (now included with MPLAB IDE download) DS30177T-page 8 © 2005 Microchip Technology Inc.

Software MPLAB® C18 C Compiler The MPLAB C18 is a full-featured ANSI-compliant The MPLAB C18 ANSI-compliant C compiler comes C compiler for the Microchip Technology PIC18CXXX complete with the MPLAB IDE. The IDE allows you to family of PICmicro® MCUs. MPLAB C18 is fully move quickly between different development and compatible with Microchip’s MPLAB IDE, allowing debugging modes. For example, you can quickly source level debugging with both the MPLAB ICE and advance from software debugging with the the MPLAB SIM Simulator. MPLAB C18 provides a MPLAB SIM Simulator to hardware debugging with convenient, project-oriented development environment MPLAB ICE. that reduces development time. MPLAB C18 has implemented extensions to the ‘C’ MPLAB C18 allows code for the PIC18CXXX family to language to provide specific support for Microchip’s be written in the high-level ‘C’ language, using powerful PICmicro MCU environment. PICmicro MCU libraries, enabling the developer to MPLAB C18 will run on any 486 or better PC, as a devote more time to the application and less time to the native 32-bit Windows® 95 or Windows NT® details of the processor. executable. MPLAB C18 was designed explicitly for the PIC18CXXX family and allows the use of a software MPLAB C18 C Compiler Contents stack for maximum RAM reusability. (cid:129) MPLAB® C18 C Compiler Software MPLAB C18 provides user-configurable interrupt (cid:129) MPLAB® IDE Software and Documentation CD support for saving and restoring context during interrupt handling. Libraries are provided for multiple (cid:129) “MPLAB® C18 C Compiler User’s Guide” and memory models. Libraries, precompiled objects and “MPLAB® C18 C Compiler Libraries” and “MPLAB® linker scripts can be included in MPLAB C18 projects, C18 C Compiler Getting Started” Manuals along with ‘C’ and Assembly source files, for use with MPLAB C18 make and build functions. Ordering Information: SW006011 MPLAB® C18 C Compiler A 60-day full-featured demo/student edition is available from the Microchip web site at www.microchip.com. © 2005 Microchip Technology Inc. DS30177T-page 9

Development Systems Ordering Guide MPLAB® C30 C Compiler MPLAB C30 is distributed with a complete ANSI ‘C’ MPLAB® C30 – dsPIC® C Compiler standard library. The library includes functions for string manipulation, dynamic memory allocation, data conversion, timekeeping and math functions (trigonometric, exponential and hyperbolic). The standard I/O functions for file handling are also included, and, as distributed, they support full access to the host file system using the command-line simulator. The compiler supports both large and small code and data models. The small code model takes advantage of a more efficient form of CALL instructions, while the small data model supports the use of compact instructions for accessing data in SFR space. The MPLAB C30 C Compiler is a fully ANSI-compliant MPLAB C30 includes a powerful command-line driver product with standard libraries for the dsPIC® DSC program. Using the driver program, application architecture. It is highly optimizing and takes programs can be compiled, assembled and linked in a advantage of many dsPIC DSC architecture-specific single step. features to provide efficient software code generation. MPLAB C30 comes complete with its own assembler, MPLAB C30 also provides extensions that allow for linker and librarian. These tools allow the user to write excellent support of the hardware, such as interrupts Mixed mode C and Assembly programs and link the and peripherals. It is fully integrated with the resulting object files into a single executable file. MPLAB IDE for high-level source debugging. MPLAB C30 comes complete with its own assembler, MPLAB C30 C Compiler Contents linker and librarian. These allow the user to write Mixed mode C and Assembly programs and link the resulting (cid:129) MPLAB® C30 C Compiler Software object files into a single executable file. (cid:129) MPLAB® IDE Software and Documentation CD (cid:129) “MPLAB® C30 C Compiler User’s Guide” (on CD) and Complete Documentation (cid:129) “MPLAB® ASM30, MPLAB® LINK30 and Utilities User’s Guide” (cid:129) “dsPIC® DSC Language Tools Getting Started” and “dsPIC® DSC Language Tool Library” Manuals Ordering Information: SW006012 MPLAB® C30 C Compiler A 60-day full-featured demo is available from the Microchip web site at www.microchip.com. DS51432 “MPLAB® C30 C Compiler Product Overview” (Available at: www.microchip.com) DS30177T-page 10 © 2005 Microchip Technology Inc.

Software F R E E dsPIC30F DSP Library The dsPIC30F DSP Library provides a set of (cid:129) Simple user interface – just one library file and one speed-optimized functions for the most common digital header file signal processing applications. The DSP Library (cid:129) Functions are both ‘C’ and Assembly callable provides significant performance savings over (cid:129) FIR filtering functions include support for Lattice, equivalent functions coded in ‘C’ and allows Decimating, Interpolating and LMS filters developers to dramatically shorten their development (cid:129) IIR filtering functions include support for Canonic, time. Transposed Canonic and Lattice filters The DSP Library is written predominantly in Assembly (cid:129) FIR and IIR functions may be used with the filter files language and makes extensive use of the dsPIC30F generated by the dsPIC® DSC Digital Filter Design DSC instruction set and hardware resources, including Tool X and Y memory addressing, modulo addressing, (cid:129) Transform functions include support for in-place and bit-reversed addressing, 9.31 saturation and REPEAT out-of-place DCT, FFT and IFFT transforms and DO loops. It provides functions for vector, matrix, (cid:129) Window functions include support for Bartlett, filtering, transform and window operations. Blackman, Hamming, Hanning and Kaiser windows Features (cid:129) Support for Program Space Visibility (cid:129) Complete function profile information, including (cid:129) 49 total functions register usage, cycle count and function size (cid:129) Full compliance with the Microchip dsPIC30F C30 information Compiler, Assembler and Linker Function Execution Times Table Function Cycle Count Equation Conditions Number of Cycles* Execution Time @ 30 MIPS Complex FFT** — N = 64 3739 124.6 μs Complex FFT** — N =1 28 8485 282.8 μs Complex FFT** — N = 256 19055 635.2 μs Block FIR 53 + N(4 + M) N = 32, M = 32 1205 40.2 μs Block FIR Lattice 41 + N(4 + 7M) N = 32, M = 32 7337 244.6 μs Block IIR Canonic 36 + N(8 + 7S) N = 32, S = 4 1188 39.6 μs Block IIR Lattice 46 + N(16 + 7M) N = 32, M = 8 2350 78.3 μs Matrix Add 20 + 3(C * R) C = 8, R = 8 212 7.1 μs Matrix Transpose 16 + C(6 + 3(R – 1)) C = 8, R = 8 232 7.7 μs Vector Dot Product 17 + 3N N = 32 113 3.8 μs Vector Max 19 + 7(N – 2) N = 32 229 7.6 μs Vector Multiply 17 + 4N N = 32 145 4.8 μs Vector Power 16 + 2N N = 32 80 2.7 μs Legend: C = # columns, N = # samples, M = # taps, S = # sections, R = # rows * 1 Cycle = 33 nanoseconds @ 30 MIPS. ** Complex FFT routine inherently prevents overflow. Ordering Information: SW300022 dsPIC30F DSP Library (Free download: www.microchip.com) DS51443 “dsPIC30F DSP Library Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 11

Development Systems Ordering Guide F R E E dsPIC30F Math Library The dsPIC30F Math Library is the compiled version of dsPIC® DSC Math Library Function and Performance the math library that is distributed with the highly Performance optimized, ANSI-compliant dsPIC30F MPLAB® C30 Function Group Function (Cycles)(1,2,3,4) C Compiler (SW006012). It contains advanced single Basic Floating Point Addition 122 and double-precision, floating-point arithmetic and Subtraction 124 trigonometric functions from the standard ‘C’ header Multiplication 109 file <math.h>. The library delivers small program code Division 361 size and data size, reduced cycles and high accuracy. Remainder 385 Features Trigonometric and acos 478 Hyperbolic asic 363 (cid:129) The math library is callable from either MPLAB C30 atan 696 or dsPIC30F Assembly language. atan2 3206 (cid:129) The functions are IEEE-754 compliant, with signed cos 3249 zero, signed infinity, NaN (Not a Number) and sin 2238 denormal support and operate in the tan 2460 “Round-to-Nearest” mode. cosh 1049 (cid:129) Compatible with MPLAB ASM30 and MPLAB sinh 525 LINK30, which are available at no charge from tanh 338 Microchip’s web site. Logarithmic and exp 530 (cid:129) Total library memory usage(1,2): Exponential frexp 39 - Code size: 5250 bytes Idexp 44 log 2889 - Data size: 4 bytes log10 3007 Power Functions pow 2134 sqrt 493 Rounding Functions ceil 94 floor 51 Absolute Value Function fabs 6 Modular Arithmetic modf 151 Functions fmod 129 Note 1: Results are based on using the dsPIC30F MPLAB® C30 Compiler (SW006012) version 1.20. 2: Maximum “Memory Usage” when all functions in the library are loaded. Most applications will use less. 3: All performance statistics represented here are for 32-bit IEEE754 floating-point input and output data types. 4: Performance (in instruction cycles) listed here represent an average number of instruction cycles required to perform the floating-point operation. Ordering Information: SW300020 dsPIC30F Math Library (Free download: www.microchip.com) DS51443 “dsPIC30F Math Library Product Overview” (Available at: www.microchip.com) DS30177T-page 12 © 2005 Microchip Technology Inc.

Software F R E E dsPIC30F Peripheral Library The dsPIC30F Peripheral Library provides a set of Features functions for setting up and controlling the operation of all the peripheral modules available in the dsPIC30F (cid:129) For each individual device from the dsPIC30F family, devices, as well as functions for interfacing with an there is a file that includes functions corresponding to external LCD. The Peripheral Library serves as a peripherals present in that particular device. convenient layer of abstraction over the specific details (cid:129) ‘C’ include files enable the user to take advantage of of the peripherals and their associated control and predefined constants for passing parameters to status registers. various library functions. There is an include file for each peripheral module. The dsPIC30F Peripheral Library supports the (cid:129) Since the functions are in the form of precompiled following hardware peripheral modules: libraries, they may be called from a user application (cid:129) Timers program written in either MPLAB®C30 or dsPIC30F (cid:129) Input Capture Assembly language. (cid:129) Output Compare (cid:129) ‘C’ source code is also included so users can (cid:129) Quadrature Encoder Interface (QEI) customize the functions to suit specific application (cid:129) Motor Control PWM requirements. (cid:129) I/O Ports and External Interrupts (cid:129) Predefined constants in ‘C’ include files eliminate the need to refer to details and structure of Special (cid:129) Reset Function Registers, while initializing peripherals or (cid:129) UART checking status bits. (cid:129) SPI™ (cid:129) I2C™ Resource Requirements (cid:129) Data Converter Interface (DCI) (cid:129) 10-Bit A/D Converter Program Memory (cid:129) 12-Bit A/D Converter The Peripheral Library functions have been optimized (cid:129) CAN for reduced program memory usage. Since the functions are in the form of libraries, the actual program Functions for controlling an external LCD through memory requirements depend on the functions being configurable I/O port pins are also provided called by the application, as well as on the specific dsPIC30F device being used. Data Memory The vast majority of the functions do not use RAM at all. Each of the remaining functions uses less than 10bytes of RAM. Ordering Information: SW300021 dsPIC30F Peripheral Library (Free download: www.microchip.com) DS51443 “dsPIC30F Peripheral Library Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 13

Development Systems Ordering Guide dsPIC30F Soft Modem Library The Microchip Soft Modem Library is composed of Both libraries are supported with fallback data pump ITU-T compliant algorithms for V.21, V.22, V.22bis, modulations down to V.21. Each data modem library is V.23, V.32 and V.32bis modem recommendations. Bell provided with a respective library archive containing all standard 103 is also included in this library. the data pump object code modules required to link to the user’s application. Hardware component drivers, V.21, V.23 and Bell 103 are Frequency Shift Keying such as UART and Data Converter Interface for (FSK) modems. V.32, V.32bis and V.22bis are DAA/AFE I/O, are provided in Assembly source code Quadrature Amplitude Modulated (QAM) modems. for linking with the user’s application. V.22 is a Quadrature Phase Shift Keyed (QPSK) modem. V.21, V.22, V.22bis, V.32 and V.32bis are all ITU-T Recommendation V.42 is provided with each 2-wire, full-duplex modems. V.23 is a full-duplex library. V.42 contains a High-Level Data Link Control modem when it operates with a 75 bps backwards (HDLC) protocol, referred to as Link Access Procedure channel. for Modems (LAPM) and defines error correcting protocols for modems. V.22bis includes fallback to V.22, V.23 and V.21 standards. V.32bis optionally falls back to V.22bis, All data pump modulations are developed in ASM30 V.22, V.23 and V.21 standards. Assembly code, yielding optimal code size and execution time. The AT, V.42 and Data Pump APIs are Features based on C30 C language. Electronic documentation accompanies the modem The data modem library is provided in two basic library to help you become familiar with and implement software packages: the library functions. A comprehensive “Soft Modem (cid:129) V.22bis/V.22, which is offered free with full source User’s Guide” describes the required APIs for the AT, code V.42 and data pump layers. (cid:129) V.32bis/V.32, which is offered in a tiered pricing structure with full source code The library currently supports single-channel data pump implementations. Ordering Information: SW300003-EVAL dsPIC30F V.32bis Soft Modem Library Software License (Evaluation Copy) SW300002 dsPIC30F V.22bis Soft Modem Library (Free download: www.microchip.com) SW300003 dsPIC30F V.32bis Soft Modem Library Software License (Up to 5K units) SW300004 dsPIC30F V.32bis Soft Modem Library Software License (5K to 25K units) SW300005 dsPIC30F V.32bis Soft Modem Library Software License (25K to 100K units) DS70126 “dsPIC30F Soft Modem Library Product Overview” (Available at: www.microchip.com) DS30177T-page 14 © 2005 Microchip Technology Inc.

Software dsPIC30F Speech Recognition Library The dsPIC30F Speech Recognition Library provides voice control of embedded applications that require an alternative user interface. With a vocabulary of up to 100 words, the Speech Recognition Library allows users to control their applications vocally. The Speech Recognition Library is an ideal front-end for hands-free products, such as modern appliances, security panels and cell phones. The Speech Recognition Library has very modest memory and processing requirements. Features (cid:129) Speaker-independent recognition of isolated words The Speech Recognition Library provides isolated, (cid:129) Hidden Markov Model-based recognition system speaker-independent word recognition of US English. It (cid:129) Recognition time < 500 msec allows the user to control an application through a set (cid:129) Master library of 100 common words of fixed, voice commands. (cid:129) Windows® operating system-based utility allows you The library has already been pretrained by a to create a custom library from the master library demographic cross-section of male and female US (cid:129) Additional words can be added to the master library English speakers. Conveniently, no training is required (fee-based) for end users of the product. (cid:129) No speaker training is required The library samples speech data from a voice codec (cid:129) US English language support connected to the dsPIC30F device’s Data Converter (cid:129) Data tables can be stored in external memory Interface. The data is processed a frame at a time, and when a word ending is detected, the received word is (cid:129) Optional keyword activation and silence identified using Hidden Markov Model processing. After detection the library identifies the word, your application may (cid:129) Optional system self-test using a predefined then take some predefined action. keyword The Speech Recognition algorithm is written in (cid:129) Flexible API Assembly language to optimize performance and (cid:129) Full compliance with Microchip MPLAB® C30 minimize RAM usage. A well-defined API makes it language tools easy to integrate the Speech Recognition Library with (cid:129) “dsPIC30F Speech Recognition Library User’s your application. Library functions let your application Guide” easily disable and enable speech recognition. The library lets your other system processing operations take place without disrupting speech recognition. Ordering Information: SW300010-EVAL dsPIC30F Speech Recognition Library Software License (Evaluation Copy) SW300010 dsPIC30F Speech Recognition Library Software License (Up to 5K units) SW300011 dsPIC30F Speech Recognition Library Software License (5K to 25K units) SW300012 dsPIC30F Speech Recognition Library Software License (25K to 100K units) AC300031 Accessory Kit (includes: microphone, headset and 6.144 MHz clock oscillator) DS51465 “dsPIC30F Speech Recognition Library Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 15

Development Systems Ordering Guide dsPIC30F Noise Suppression Library The dsPIC30F Noise Suppression Library provides a function to suppress the effect of noise interference with a speech signal. This function is useful for Noise Suppression microphone-based applications, which have a potential for incoming speech corruption by ambient noise andN Sopiseeech User Application Speech captured by the microphone. It is especially suitable for systems in which an acoustically isolated noise (cid:129) Highly optimized Assembly code, utilizing DSC reference is not available, such as: instructions and advanced addressing modes (cid:129) Hands-free Cell Phone Kits (cid:129) Audio Bandwidth: 0-4 kHz at 8 kHz sampling rate (cid:129) Speakerphones (cid:129) 10-20 dB noise reduction, depending on the type of (cid:129) Intercoms noise: (cid:129) Teleconferencing Systems - Several speech recordings corrupted by Babble, Car Cabin, White and Narrowband (cid:129) Headsets Noise included for library evaluation (cid:129) As a front-end to a Speech Recognition system (cid:129) Source code is provided with the library (e.g., SW300010) (cid:129) “dsPIC30F Noise Suppression Library User’s Guide” (cid:129) Any microphone-based application that needs to is provided to help the user understand and use the eliminate undesired noise library Features (cid:129) Demo application source code is provided with the library (cid:129) Only 2 user functions (“NoiseSuppressionInit” (cid:129) Accessory Kit available for purchase includes: an and “NoiseSuppression”), both of which can be audio cable, headset, oscillators, microphone, called from either a ‘C’ or Assembly application speaker, DB9 M/F RS-232 cable, DB9M-DB9M null program modem adapter and can be used for library (cid:129) Full compliance with the Microchip dsPIC30F C30 evaluation Compiler, Assembler and Linker Contact Microchip sales for FREE evaluation samples. (cid:129) Simple user interface – just one library file and one header file Ordering Information: SW300040-EVAL dsPIC30F Noise Suppression Library Software License (Evaluation Copy) SW300040-5K dsPIC30F Noise Suppression Library Software License (Up to 5K units) SW300040-25K dsPIC30F Noise Suppression Library Software License (5K to 25K units) SW300040-100K dsPIC30F Noise Suppression Library Software License (25K to 100K units) AC300030 Accessory Kit (includes: audio cable, headset, oscillators, microphone, speaker, M/F RS-232 cable, DB9M-DB9M Null Modem Adapter) DS70124 “dsPIC30F Noise Suppression Library Product Overview” (Available at: www.microchip.com) DS30177T-page 16 © 2005 Microchip Technology Inc.

Software dsPIC30F Acoustic Echo Cancellation Library The dsPIC30F Acoustic Echo Cancellation (AEC) User Application Library provides a function to eliminate echoes Far End Far End Speech Speech generated in the acoustic path between a speaker and Receive Path a microphone. This function is useful for speech and telephony applications in which a speaker and a Acoustic Echo microphone are located in close proximity to each other Cancellation Adaptive Echo and therefore, susceptible to signals propagating from Filter the speaker to the microphone resulting in a - perceptible and distracting echo effect at the far end. It ∑ + is especially suitable for these applications: NSpeeaer cEhnd Send Path NSpeeaer cEhnd (cid:129) Hands-free Cell Phone Kits FAR END NEAR END (cid:129) Speakerphones (cid:129) Intercoms (cid:129) Fully tested for compliance with G.167 specifications for in-car applications (cid:129) Teleconferencing Systems (cid:129) Audio Bandwidth: 0-4 kHz at 8 kHz sampling rate For hands-free phones intended to be used in compact (cid:129) Convergence Rate: Up to 43 dB/sec., typically > 30 environments, such as a car, this library is fully dB/sec. compliant with the G.167 standard for acoustic echo cancellation. (cid:129) Echo Cancellation: Up to 50 dB, typically > 40 dB (cid:129) Can be used together with the Noise Suppression Features (NS) Library, since the same processing block size (10 ms) is used (cid:129) Only 2 user functions (cid:129) “dsPIC30F Acoustic Echo Cancellation Library (“AcousticEchoCancellerInit” and User’s Guide” is provided to help the user “AcousticEchoCanceller”), both of which can be understand and use the library called from either a ‘C’ or Assembly application (cid:129) Demo application source code is provided with the program library. Accessory kit available for purchase includes: (cid:129) Full compliance with the Microchip dsPIC30F C30 an audio cable, headset, oscillators, microphone, C Compiler, Assembler and Linker simple user speaker, DB9 M/F RS-232 cable and DB9M-DB9M interface – just one library file and one header file Null Modem Adapter and can be used for library (cid:129) Highly optimized Assembly code, utilizing DSC evaluation instructions and advanced addressing modes (cid:129) Contact Microchip sales for FREE evaluation (cid:129) Echo cancellation for 16, 32 or 64 ms echo delays or samples ‘tail lengths’ (configurable) Ordering Information: SW300060-EVAL dsPIC30F Acoustic Echo Cancellation Library Software License (Evaluation Copy) SW300060-5K dsPIC30F Acoustic Echo Cancellation Library Software License (Up to 5K units) SW300060-25K dsPIC30F Acoustic Echo Cancellation Library Software License (5K to 25K units) SW300060-100K dsPIC30F Acoustic Echo Cancellation Library Software License (25K to 100K units) AC300030 Accessory Kit (includes: audio cable, headset, oscillators, microphone, speaker, M/F RS-232 cable, DB9M-DB9M Null Modem Adapter) DS70123 “dsPIC30F Acoustic Echo Cancellation Library Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 17

Development Systems Ordering Guide dsPIC® DSC Symmetric Key Embedded Encryption Library Microchip offers a reliable security solution for Features embedded applications built on the dsPIC30F platform. This solution is provided by means of two libraries – (cid:129) C-callable library functions developed in Symmetric Key and Asymmetric Key Embedded MPLAB® ASM30 Encryption Libraries. The Symmetric Key Library (cid:129) Assembly language features the following: (cid:129) Optimized for speed, code size and RAM usage: (cid:129) Hash Functions: - RAM usage below 60 bytes - SHA-1 Secure Hash Standard (cid:129) Library functions extensively tested for adherence to applicable standards - MD5 Message Digest (cid:129) Symmetric Key Encryption/Decryption functions (cid:129) Symmetric Key Encryption/Decryption Functions: support multiple modes of operation: - Advanced Encryption Standard (AES) - Electronic Code Book (ECB) mode - Triple Data Encryption Algorithm - Cipher Block Chaining with Message (Triple-DES) Authentication (CBC-MAC) mode (cid:129) Random Number Generator Functions: - Counter (CTR) mode - Deterministic Random Bit Generator - Combined CBC-MAC and Counter (CCM) ANSI X9.82 mode (cid:129) A comprehensive “dsPIC30F Embedded Encryption Libraries User’s Guide” describing the required APIs for the library functions (cid:129) Several examples of use are provided for each library function Ordering Information: SW300050-EVAL dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (Evaluation Copy) SW300050-5K dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (Up to 5K units) SW300050-25K dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (5K to 25K units) SW300050-100K dsPIC® DSC Symmetric Key Embedded Encryption Library Software License (25K to 100K units) DS70128 “dsPIC® DSC Symmetric Key Embedded Encryption Library Product Overview” (Available at: www.microchip.com) DS30177T-page 18 © 2005 Microchip Technology Inc.

Software dsPIC® DSC Asymmetric Key Embedded Encryption Library Microchip offers a reliable security solution for Typical Applications embedded applications built on the dsPIC30F platform. This solution is provided by means of two libraries – The algorithms supported by this library have emerged Symmetric Key and Asymmetric Key Embedded as the defacto standard for many large scale, secured Encryption Libraries. The Asymmetric Key Library applications, like web access, e-mail, secure XML implements the following: transactions and Virtual Private Networks (VPN). These algorithms are also recommended by most (cid:129) Public Key Encryption/Decryption Functions: Internet Engineering Task Force (IETF) Standards, - RSA (1024 and 2048-bit) Federal Information Processing Standards (FIPS) and (cid:129) Key Agreement Protocol: IPSec Standards. Some typical applications for this - Diffie-Hellman (1024 and 2048-bit) library include: (cid:129) Signing and Verification: (cid:129) Mobile and wireless devices, PDAs - DSA (1024-bit) (cid:129) Secure banking - RSA (1024 and 2048-bit) (cid:129) Secure web transactions: (cid:129) Hash and Message Digest Functions: - Secure Socket Layer (SSL) - SHA-1, MD5 - Transport Layer Security (TLS) (cid:129) Random Number Generator (RNG): - Secure Multi-purpose Internet Mail - ANSI X9.82 Extensions (S/MIME) - ZigBee™ technology and other monitoring Features and control applications (cid:129) Smart card readers (cid:129) C-callable library functions developed in (cid:129) Friend/foe identification MPLAB ASM30 Assembly language (cid:129) Peripherals interoperating with TCG and NGSCB (cid:129) Optimized for speed, code size and RAM usage: personal computers - RAM usage below 100 bytes (cid:129) Library functions extensively tested for The Trusted Computing Group (TCG) and related adherence to applicable standards Microsoft® Next Generation Secure Computing Base (NGSCB) both specify RSA and Triple-DES. AES, (cid:129) A comprehensive “dsPIC30F Embedded Triple DES and other symmetric solutions are featured Encryption Libraries User’s Guide” describing the in the dsPIC30F Symmetric Key Embedded Encryption required APIs for the library functions Library (SW300050). (cid:129) Several examples of use provided for each library function Ordering Information: SW300055-EVAL dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (Evaluation Copy) SW300055-5K dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (Up to 5K units) SW300055-25K dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (5K to 25K units) SW300055-100K dsPIC® DSC Asymmetric Key Embedded Encryption Library Software License (25K to 100K units) DS70127 “dsPIC® DSC Asymmetric Key Embedded Encryption Library Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 19

Development Systems Ordering Guide N E W dsPIC30F Speech Encoding/Decoding Library The dsPIC30F Speech Encoding/Decoding Library performs toll-quality voice compression and voice decompression. The library is based on a modified version of Speex source code and features a 16:1 compression ratio. It samples speech at 8 kHz and compresses it to a rate of 8 kbps. Storing compressed speech for playback requires approximately 1 Kbyte of memory for each second of speech. Features Key features of the library include: (cid:129) Fixed 8 kHz sample rate (cid:129) Fixed 8 kbps output rate (cid:129) PESQ-based Mean Opinion Score: 3.7-4.2 (out of 5.0) (cid:129) Code Excited Linear Prediction (CELP)-based coding Resource Requirements (cid:129) Two analog input interfaces – codec or on-chip 12-bit ADC Decoder: (cid:129) Two analog output interfaces – codec or Playback Interface: Si-3000 Audio codec or PWM on-chip PWM Computational Power: 3 MIPS (cid:129) Optional Voice Activity Detection Program Flash Memory: 15 KB (cid:129) Playback-only applications will benefit from the RAM*: 3.2 KB Speech Encoder Utility. It allows you to make Encoder: encoded speech files from your desktop using a PC Sampling Interface: Si-3000 Audio codec or 12-bit ADC microphone or WAV file Computational Power: 19 MIPS (worst case) (cid:129) Storing compressed speech requires 1 KB of Program Flash Memory: 33 KB memory per second of speech RAM*: 5.4 KB (1.2 KB is scratch) (cid:129) Off-chip support for playback of long speech samples * Full-duplex support is presently not possible due to RAM requirements, (cid:129) Royalty free (only one-time license fee) but support will be provided with future devices. Half-duplex support is (cid:129) Full compliance with Microchip MPLAB® C30 now possible and requires 6.8 KB of RAM. C Compiler Tools (cid:129) “dsPIC30F Speech Encoding/Decoding Library User’s Guide” (DS70154) is provided to help the user understand and use the library (cid:129) Designed to run on dsPICDEM™ 1.1 Demonstration Board (DM300014) Ordering Information: SW300070-EVAL dsPIC30F Speech Encoder/Decoder Library Software License (Evaluation Only) SW300070-5K dsPIC30F Speech Encoder/Decoder Library Software License (Up to 5K units) SW300070-25K dsPIC30F Speech Encoder/Decoder Library Software License (Up to 25K units) SW300070-100K dsPIC30F Speech Encoder/Decoder Library Software License (Up to 100K units) DS70146 “dsPIC30F Speech Encoding/Decoding Library Product Overview” DS30177T-page 20 © 2005 Microchip Technology Inc.

Software F R E E dsPICworks™ Data Analysis and DSP Software dsPICworks software is an easy-to-use data analysis and signal processing package for designs using dsPIC30F digital signal controllers. It provides an extensive number of functions encompassing: (cid:129) Signal generation (cid:129) Arithmetic operations and digital signal processing (cid:129) One, two and three-dimensional display and measurement capabilities (cid:129) Data import/export compatible with MPLAB® IDE and MPLAB ASM30 Assembler Features (cid:129) Wide variety of signal generators – sine, square, triangular, window functions, noise (cid:129) Extensive DSP functions – FFT, DCT, filtering, Arithmetic and Digital Signal Processing convolution, interpolation (DSP) Operations (cid:129) Extensive arithmetic functions – algebraic dsPICworks software has a wide range of DSP and expressions, data scaling, clipping, etc. arithmetic functions which can be applied to signals. (cid:129) 1-D, 2-D and 3-D displays Standard DSP functions include transform operations – (cid:129) Multiple data quantization and saturation options FFT and DCT, convolution and correlation, signal (cid:129) Multi-channel data support decimation, signal interpolation sample rate conversion (cid:129) Automatic “script file”-based execution options and digital filtering. available for any user-defined sequence of Display and Measurement dsPICworks software functions (cid:129) File import/export interoperable with MPLAB IDE dsPICworks software has a wide variety of display and measurement options. Frequency domain data may be (cid:129) Digital filtering options support filters generated by plotted in the form of 2-dimensional “spectrogram” and dsPIC Digital Filter Design 3-dimensional “waterfall” options. The log window (cid:129) ASM30 Assembler file option to export data tables shows current cursor coordinates, as well as derived into dsPIC30F RAM values, such as the difference from last position and Signal Generation signal frequency. dsPICworks software supports an extensive set of signal generators, including basic sine, square and triangle wave generators, as well as advanced generators for window functions, unit step, unit sample, sinc, exponential and noise functions. Ordering Information: SW300023 dsPICworks™ Data Analysis and DSP Software (Free download: www.microchip.com) DS51442 “dsPICworks™ Data Analysis and DSP Software Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 21

Development Systems Ordering Guide Digital Filter Design/Digital Filter Design Lite The Digital Filter Design tool for the dsPIC® 16-bit Digital Signal Controllers makes designing, analyzing and implementing Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) digital filters easy through a menu-driven and intuitive user interface. The filter design tool performs complex mathematical computations for filter design, provides superior graphical displays and generates comprehensive design reports. Desired filter frequency specifications are entered and the tool automatically generates the filter code and coefficient files ready to use in the MPLAB® IDE. System analysis of the filter transfer function is supported with multiple generated graphs, such as: magnitude, phase, group delay, log magnitude, impulse response and pole/zero locations. Finite Impulse Response Filter Design (cid:129) Design method selection: Infinite Impulse Response Filter Design - FIR Windows design - FIR Equiripple design (Parks-McClellan) (cid:129) Low-pass, high-pass, band-pass and band-stop filters (cid:129) Low-pass, high-pass, band-pass and band-stop filters (cid:129) Filter orders up to 10 for low-pass and high-pass filters (cid:129) FIR filters can have up to 513 taps (cid:129) Filter orders up to 20 for band-pass and band-stop filters (cid:129) Following window functions are supported: (cid:129) Five analog prototype filters are available: - Rectangular: 4 Term Cosine - Butterworth - Hanning (Hann): 4 Term Cosine with continuous 5th - Tschebyscheff derivative - Inverse Tschebyscheff - Hamming: Minimum 4 Term Cosine - Elliptic - Triangular: Good 4 Term Blackman Harris - Bessel - Blackman: Harris Flat Top - Exact Blackman: Kaiser (cid:129) Digital Transformations are performed by bilinear - 3 Term Cosine: Dolph-Tschebyscheff transformation method - 3 Term Cosine with continuous 3rd derivative: Taylor (cid:129) Reports show design details, such as all - Minimum 3 Term Cosine: Gaussian transformations from normalized low-pass filter to (cid:129) Reports show design details, such as window desired filter coefficients and Impulse Response, prior to Code Generation Features multiplying by the window function (cid:129) Generated files are compliant with the Microchip (cid:129) Filters are designed for a maximum gain of 1 dsPIC30F C30 C Compiler, Assembler and Linker Comparison – Filter Design vs. Filter Design Lite (cid:129) Choice of placement of coefficients in program space Filter Design Filter Design Lite or data space Low-pass ✓ ✓ (cid:129) ‘C’ wrapper/header code generation High-pass ✓ ✓ Band-pass ✓ ✓ Graphs Band-stop ✓ (cid:129) Magnitude Response vs. Frequency FIR Taps Up to 513 Up to 64 (cid:129) Log Magnitude vs. Frequency IIR Taps for LP, HP Up to 10 Up to 4 (cid:129) Phase Response vs. Frequency IIR Taps for BP, BS Up to 20 Up to 8 Generate ASM Code ✓ — (cid:129) Group Delay vs. Frequency Export to MPLAB® IDE ✓ ✓ (cid:129) Impulse Response vs. Time (per sample) Export to MPLAB® C30 C Compiler ✓ ✓ (cid:129) Step Response vs. Time (per sample) MATLAB® Support ✓ ✓ (cid:129) Pole and Zero Locations (IIR only) Ordering Information: SW300001 Digital Filter Design SW300001-LT Digital Filter Design Lite DS51442 “Digital Filter Design/Digital Filter Design Lite” (Available at: www.microchip.com) DS30177T-page 22 © 2005 Microchip Technology Inc.

Software CMX-MicroNet™ for dsPIC30F Devices CMX-MicroNet is an embedded TCP/IP stack that is specifically designed for optimized use of Flash and RAM resources on Microchip’s 16-bit Digital Signal Controller. The software runs directly on the processor with no gateways or PCs required. The stack can be run in Stand-alone mode or work in conjunction with an RTOS. Using only industry standard protocols, CMX-MicroNet offers true TCP/IP networking via Direct, Dial-up or Ethernet connectivity and wireless Ethernet (802.11b) as well. Up to 127 sockets can be open at a time. They can be Ethernet sockets and/or either PPP or SLIP sockets. PPP and SLIP cannot be used at the same time. An HTTP Web server, FTP server, SMTP client and DHCP client are also available. The RS-232 link, if used, can either be a direct cable link or through a modem. CMX-MicroNet Specifications for Description dsPIC® DSC Products CMX-MicroNet is available for a low, one-time fee with no royalties on deployed products. In addition, Flash CMX-MicroNet offers only industry standard protocols running directly on the target processor and full source (cid:129) UDP/IP + core: 4470 bytes code is provided with every sale. (cid:129) TCP/IP + core: 7827 bytes (cid:129) UDP/TCP/IP + core: 8685 bytes Supported Protocols (cid:129) PPP: 6681 bytes TCP PPP (cid:129) Modem: 447 bytes UDP SLIP (cid:129) HTTP server: 3888 bytes IP HTTP Web Server (cid:129) Virtual file: 885 bytes DHCP FTP (cid:129) Ethernet: 2652 bytes TFTP SMTP (cid:129) DHCP Client: 2202 bytes (cid:129) FTP Server: 3657 bytes (cid:129) TFTP Client: 723 bytes (cid:129) BOOTP: 684 bytes (cid:129) SMTP: 1918 bytes (cid:129) Utility: 1314 bytes Ordering Information: CMX-MicroNet™ for dsPIC30F Devices is available from CMX. DS51447 “CMX-MicroNet™ for dsPIC30F Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 23

Development Systems Ordering Guide CMX-RTX™ for dsPIC30F Devices In some cases, well-structured linear programming is Features sufficient for a product. In most cases, however, programmers appreciate not having to worry about (cid:129) The smallest footprint structuring their code to perform all necessary tasks in (cid:129) The fastest context switch times a timely manner. This is where CMX-RTX can help. (cid:129) The lowest interrupt latency times CMX-RTX allows tasks (pieces of code that do specific (cid:129) True preemption duties) to run quasi-concurrently. This means that tasks (cid:129) Scheduler and interrupt handler written in will seem to run all at the same time – doing many Assembly for speed and optimization specific jobs simultaneously. (cid:129) Optional cooperative and time-slicing scheduling CMX-RTX takes the worry and headaches out of (cid:129) Nested interrupts real-time programming. The software lets embedded (cid:129) All functions contained in a library programmers concentrate on the overall application as (cid:129) Interrupt callable functions it takes care of the little details. Finish projects faster and more efficiently with CMX-RTX. (cid:129) Scalability (cid:129) Free source code provided Some RTOS software offers only cooperative scheduling, which means that the running task has to (cid:129) Integrated with CMX-MicroNet™ for optional call the scheduler to perform a task switch. Others offer networking connectivity time slicing, where each task runs for a certain period of time, at which point, a task switch takes place no CMX-RTX Specifications for matter what. Others claim to be fully preemptive, but do dsPIC® DSC Products not allow any interrupt to cause a preemption. All of these models will fail at one point or another. Flash CMX-RTX allows a task of higher priority that is able to (cid:129) All CMX Functions: 3696 bytes run (whether starting or resuming) to preempt the lower (cid:129) CMX Initialize Module: 936 bytes priority running task. This will cause the scheduler to save the context of the running (lower priority) task (cid:129) CMX Assembly Module (scheduler): 645 bytes and restore the context of the higher priority task so (cid:129) RAM, Each Task Control Block: 28 bytes that it is now running. A truly preemptive RTOS allows (cid:129) Min. Context Switch: interrupts to cause an immediate task switch. This - 92 cycles (starting a task) means that the interrupts now have the added ability of - 137 cycles (resuming a task) using the RTOS’s functions. (cid:129) CMX functions are contained in a library, thus reducing code size, if not referenced Ordering Information: SW300031 CMX-RTX™ for dsPIC30F Devices DS51435 “CMX-RTX™ for dsPIC30F Product Overview” (Available at: www.microchip.com) DS30177T-page 24 © 2005 Microchip Technology Inc.

Software F R E E CMX-Scheduler™ for dsPIC® DSC Devices CMX-Scheduler is the result of a special collaboration CMX-Scheduler Specifications for between CMX and Microchip. Available in object code ® dsPIC DSC Products only, CMX-Scheduler is available for FREE to embedded systems designers using the dsPIC® digital (cid:129) All CMX Functions: 972 bytes signal controllers. CMX-Scheduler is specially (cid:129) CMX Initialize Module: 153 bytes designed for developers whose designs do not require (cid:129) CMX Assembly Module: 567 bytes a full blown RTOS and/or who are wondering if a kernel (cid:129) RAM, Each Task Control Block: 11 bytes might help their application. The perfect entry-level kernel, CMX-Scheduler is intuitive to use and easy to (cid:129) Flash, Each Task Control Block: 5 bytes: implement. - Min. Context Switch: 81 cycles (starting a task) CMX-Scheduler offers many growth paths for future designs. User applications developed with the - 102 cycles (resuming a task) CMX-Scheduler kernel are upwardly compatible with (cid:129) CMX functions are contained in a library, thus the popular CMX-Tiny+™ or CMX-RTX™ RTOSes. reducing code size, if not referenced CMX-Scheduler also is tightly integrated with the unique CMX-MicroNet™ TCP/IP stack for those Functionality applications that require networking connectivity. (cid:129) K_Task_Create – creates a task CMX-Scheduler software and documentation is (cid:129) K_Task_Start – starts a task delivered in electronic format and is freely licensed for (cid:129) K_Task_Wake – wakes a task unlimited product usage on the dsPIC DSC devices. (cid:129) K_Task_Wait – has a task wait with/without a Features time-out (cid:129) K_Task_Kill – Deletes a task (cid:129) FREE for use on any dsPIC DSC device (cid:129) K_Task_Coop_Sched – performs a cooperative (cid:129) Easy to learn and use task switch (cid:129) Truly preemptive kernel (cid:129) K_Event_Wait – waits on an event (cid:129) Supports up to five tasks (cid:129) K_Event_Signal – signals an event from a task (cid:129) Fast performance (cid:129) K_Event_Signal – signals an event from an (cid:129) Free bug fixes and updates interrupt (cid:129) No royalties on shipped products (cid:129) Compatible with CMX-Tiny+ and CMX-RTX (cid:129) Complete electronic documentation (cid:129) Integrated with CMX-MicroNet for optional networking connectivity Ordering Information: SW300030 CMX-Scheduler™ for dsPIC® DSC Devices (Free download: www.cmx.com/microchip) DS51439 “CMX-Scheduler™ for dsPIC® DSC Devices Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 25

Development Systems Ordering Guide CMX-Tiny+™ for dsPIC30F Devices In some cases, well-structured linear programming is In addition, CMX-Tiny+ has been especially designed sufficient for a product. In most cases, however, to offer such a small Flash/RAM footprint that it can be programmers appreciate not having to worry about used with only the on-board Flash/RAM of the dsPIC structuring their code to perform all necessary tasks in DSC as a single chip solution. Based upon a scaled a timely manner. This is where CMX-Tiny+ can help. down version of the popular CMX-RTX™, CMX-Tiny+ CMX-Tiny+ allows tasks (pieces of code that do retains most of the power of CMX-RTX, as well as the specific duties) to run quasi-concurrently. This means more frequently used functions. that tasks will seem to run all at the same time – doing many specific jobs simultaneously. Features CMX-Tiny+ takes the worry and headaches out of (cid:129) Extremely small Flash/RAM footprint real-time programming. The software lets the (cid:129) Truly preemptive RTOS embedded programmer concentrate on the overall application while taking care of the little details. (cid:129) Low-power mode supported Finish projects faster and more efficiently with (cid:129) Full source code with every purchase CMX-Tiny+. (cid:129) Free technical support and updates Some RTOS software offers only cooperative (cid:129) Low, economical pricing scheduling, which means that the running task has to (cid:129) No royalties on shipped products call the scheduler to perform a task switch. Others (cid:129) Backward compatible with CMX-Scheduler™ offer time slicing in which each task runs for a certain (cid:129) Integrated with CMX-MicroNet™ for optional period of time, at which point, a task switch takes networking connectivity place no matter what. Others claim to be fully preemptive, yet do not allow any interrupt to cause a CMX-Tiny+ Specifications for preemption. All of these models will fail at one point or another. dsPIC® DSC Products CMX-Tiny+ allows a task of higher priority that is able Flash to run (whether starting or resuming) to preempt the lower priority running task. This will cause the (cid:129) All CMX Functions: 2304 bytes scheduler to save the context of the running (lower (cid:129) CMX Initialize Module: 249 bytes priority) task and restore the context of the higher (cid:129) CMX Assembly Module (scheduler): 570 bytes priority task so that it is now running. (cid:129) RAM, Each Task Control Block: 13 bytes A truly preemptive RTOS allows interrupts to cause an (cid:129) Flash, Each Task Control Block: 6 bytes immediate task switch. This means that the interrupts (cid:129) Min. Context Switch: now have the added ability of using the RTOS’s - 71 cycles (starting a task) functions. - 121 cycles (resuming a task) (cid:129) CMX functions are contained in a library, thus reducing code size, if not referenced Ordering Information: SW300032 CMX-Tiny+™ for dsPIC30F Devices DS51436 “CMX-Tiny+™ for dsPIC30F Product Overview” (Available at: www.microchip.com) DS30177T-page 26 © 2005 Microchip Technology Inc.

Software F R E E FilterLab® Active Filter Software Design Tool Features (cid:129) Multiple filter order and responses with gain option: - Ability to select Bessel, Butterworth or Chebyshev filter response - Up to 8th-order filters can be simulated - Circuit diagram and component values given (cid:129) Bode plot with phase margin: - Resultant Bode plot generated (cid:129) Circuit implementation: - Standard 1-percent resistors - Standard capacitor values can generate and are user adjustable - Circuit configuration: Sallen-Key (noninverting) or multiple feedback (inverting) FilterLab Active Filter Software Design Tool is an (cid:129) Spice model generated: innovative software tool that simplifies active filter - Spice model of entire filter generated design. The FilterLab Active Filter Software Design - Allows for streamline of simulations Tool provides full schematic diagrams of the filter circuit (cid:129) Anti-aliasing wizard with component values and displays the frequency - Filter optimization for Analog-to-Digital response. Converter based on bit resolution and sample rate Ordering Information: Free download: www.microchip.com © 2005 Microchip Technology Inc. DS30177T-page 27

Development Systems Ordering Guide F R E E Total Endurance™ Software Model Microchip’s revolutionary Total Endurance Software The model will respond with FIT rate, PPM level, Model provides electronic system designers with application life and plot of the PPM level versus unprecedented visibility into serial EEPROM-based number of cycles. The model is available in both applications. This advanced software model (with a MS-DOS® and Windows® versions. very friendly user interface) eliminates time and guesswork from serial EEPROM-based designs by Features accurately predicting the device’s performance and reliability within a user-defined application (cid:129) Automatic or manual recalculation environment. Design trade-off analysis, which formerly (cid:129) Real-time update of data consumed days or weeks, can now be performed in (cid:129) Full screen or windowed graphical view minutes – with a level of accuracy that delivers a truly (cid:129) Hypertext on-screen help robust design. (cid:129) Key or slide bar entry of parameters With Microchip’s Total Endurance Software Model, (cid:129) On-screen editing of parameters users may input the following application parameters: (cid:129) Single click copy of plot to clipboard (cid:129) Serial EEPROM device type (cid:129) Numeric export to delimited text file (cid:129) Bytes to be written per cycle (cid:129) On-disk Total Endurance tutorial (cid:129) Cycling mode – byte or page (cid:129) Data pattern type – random or worst-case (cid:129) Temperature in °C (cid:129) Erase/Write cycles per day (cid:129) Application lifetime or target PPM level Ordering Information: Free download: www.microchip.com DS30177T-page 28 © 2005 Microchip Technology Inc.

Software K L ® Security ICs License CD EE OQ The KEELOQ Security ICs License CD contains The KEELOQ Security ICs decoder software is typically application notes, decoder software and the KEELOQ used as the starting point of a decoder design. The Security ICs Software Toolkit. Also included are data software is fully described in the application notes sheets, development tools documentation and accompanying the software. MPLAB® IDE software. The KEELOQ Security ICs Software Toolkit is a tool that is designed to be used by a system developer to debug code. The toolkit allows the user to receive transmissions from the KEELOQ Security ICs Evaluation Kit II (DM303006). Ordering Information: DS40038 KEELOQ® Security ICs License CD Available from Microchip at: lit_inquiry@microchip.com (Americas and Canada), euro.inquiry@microchip.com (Europe) or asia.inquiry@microchip.com (Far East. © 2005 Microchip Technology Inc. DS30177T-page 29

Development Systems Ordering Guide NOTES: DS30177T-page 30 © 2005 Microchip Technology Inc.

HARDWARE This section contains the following major topics: MPLAB® ICD 2 In-Circuit Debugger..........................................................................................32 MPLAB® ICD 2 Accessories .....................................................................................................33 PICSTART® Plus Development Programmer............................................................................34 PICkit™ 1 Flash Starter Kit........................................................................................................35 rfPIC® Development Kit 1..........................................................................................................36 PIC10F2XX Programmers/Adapters.........................................................................................37 Signal Analysis PICtail™ Daughter Board................................................................................38 Ethernet PICtail™ Daughter Board...........................................................................................39 PICkit™ 2 Starter Kit.................................................................................................................40 © 2005 Microchip Technology Inc. DS30177T-page 31

Development Systems Ordering Guide MPLAB® ICD 2 In-Circuit Debugger The MPLAB Shared overhead includes: one stack level, some ICD 2 module general purpose file registers, a small bank of program isa low-cost memory when in the Debug mode and two hardware development pins (RB6 and RB7). tool that The MPLAB ICD 2 is firmware-based, which allows it to connects be enhanced to support future microcontroller products between the and new features, extending the tool life and making it PCand the a valued buy. Firmware downloads are available from designer’s the Microchip web site at: www.microchip.com. target board, allowing direct Features in-circuit debugging of a target PICmicro® MCU or dsPIC® DSC. (cid:129) USB (full speed, 2 Mbits/s) and RS-232 interface to Programs can be executed in real time or single step, host PC watch variables established, break points set, memory (cid:129) Real-time background debugging read/writes accomplished and more. It can also be (cid:129) Built-in overvoltage/short-circuit monitor used as a development programmer for the (cid:129) Supports low-voltage operation to 2.0 volts microcontrollers. (cid:129) Diagnostic LEDs (power, busy, error) The MPLAB ICD 2 allows debugging of selected (cid:129) Reading/writing memory space and stack of target Flash-based Microchip microcontrollers using MPLAB microcontroller Integrated Development Environment (IDE). This powerful graphical user interface is included with each (cid:129) Erase of program memory space with verification unit as a free tool. It is the ideal tool for embedded (cid:129) Freeze on Halt control designers who do not have the budget for a (cid:129) Programs many Flash devices high-cost, in-circuit emulator. Ordering Information: DV164005 MPLAB® ICD 2 Module (Includes MPLAB ICD 2 Module, RJ-11 Cable and USB Cable) DV164006 MPLAB® ICD 2 Evaluation Kit (Includes MPLAB ICD 2 Module, RJ-11 Cable, USB Cable, RS-232 Cable, Power Supply and PICDEM™ 2 Plus Demonstration Board – DM163022) DV164007 MPLAB® ICD 2 Module ws (Includes MPLAB ICD 2 Module, RJ-11 Cable, USB Cable, RS-232 Cable and Power Supply) DV164030 MPLAB® ICD 2 with dsPICDEM™ Starter Demonstration Board DV164032 MPLAB® ICD 2 with dsPICDEM 1.1 General Purpose Demonstration Board DS51264 “MPLAB® ICD 2 In-Circuit Debugger/Programmer Product Overview” (Available at: www.microchip.com) DS30177T-page 32 © 2005 Microchip Technology Inc.

Hardware MPLAB® ICD 2 Accessories RS-232 and Power Supply Kit Features Universal Power Supply and Serial Cable to support (cid:129) ZIF Socket using the ICD 2 for serial communications or with the (cid:129) Supports up to 40-pin devices from 300 to 600mil Universal Programmer Module. These items are width included with the MPLAB® ICD 2 Evaluation Kit (cid:129) MPLAB ICD 2 Connector (DV164006) and MPLAB® ICD 2 Module ws (DV164007) products. MPLAB ICD 2 Header Interfaces The header interface provides in-circuit debugging Universal Programming Module capability to the 8-pin, 14-pin or 18-pin devices. The The Universal header interface is connected in place of the target Programming Module is device and houses a standard MPLAB ICD 2 a handy, low-cost tool to connector. In-circuit debugging is done via an support programming of MPLAB ICD 2. Once the code is debugged, the DIP packaged products debugged software can then be programmed into the from Microchip. device and installed in the board, replacing the header. It can be used in conjunction with the In-Circuit Debugger (MPLAB ICD2) to provide an easy means for programming microcontrollers. Seven flying leads break out the primary programming lines needed for any microcontroller. These are connected to the 40 breakout pins of the ZIF socket, allowing any part to be configured to the necessary programming lines. Ordering Information: AC162048 RS-232 and Power Supply Kit AC162049 Universal Programming Module AC162050 PIC12F629/675 MPLAB ICD 2 Header Interface Module AC162051 MPLAB® ICD 2 Header Interface Module AC162052 PIC16F630/676 MPLAB ICD 2 Header Interface Module (14-pin DIP) AC162053 PIC16F648A/627A/628A MPLAB ICD 2 Header Interface Module (18-pin DIP) AC162054 MPLAB® ICD 2 18-pin Header (PIC16F716) AC162055 MPLAB® ICD 2 14-pin Header (PIC16F684) AC162056 MPLAB® ICD 2 14-pin Header (PIC16F688) AC162057 MPLAB® ICD 2 14-pin Header (PIC16F638/636) AC162058 MPLAB® ICD 2 8-pin Header (PIC12F683) AC162059 MPLAB® ICD 2 8/14-pin Header (PIC16F505) Estimated availability CQ305 AC162060 MPLAB® ICD 2 20-pin Header (PIC16C785) Estimated availability CQ305 © 2005 Microchip Technology Inc. DS30177T-page 33

Development Systems Ordering Guide PICSTART® Plus Development Programmer The PICSTART Plus The PICSTART Plus Programmer system runs on any Programmer gives the PC-compatible machine under Windows®98 SE or product developer the ability later operating system. The easy-to-use PICSTART to program user software into Plus Programmer software provides for full interactive any of the supported control over the programmer and features Microchip’s microcontrollers. The highly acclaimed MPLAB IDE, with its built-in editor, PICSTART Plus Programmer assembler and Windows operating system-based software, running under MPLAB SIM Simulator. MPLAB® IDE, provides for full interactive control over the PICSTART® Plus Development programmer. Programmer Contents The PICSTART Plus Programmer provides the product (cid:129) PICSTART Plus Development Programmer development engineer with a highly flexible, low-cost design tool set for all PICmicro® MCUs (DIP packages, (cid:129) Product Sample up to 40 pins). PLCC and QFN adapters are available. (cid:129) MPLAB IDE Software (cid:129) PICC LITE C Compiler The CE-compliant PICSTART Plus Programmer features a molded plastic enclosure and special circuit (cid:129) RS-232 Interface Cable design techniques to enhance ESD protection. The (cid:129) Power Supply PICSTARTPlus Development Programmer is not (cid:129) Complete Documentation recommended for use in a production environment. Sample software programs are provided to help the PICSTART Plus Development Programmer developer quickly become familiar with the PICSTART Flash Reprogrammable Firmware Upgrade Plus Development Programmer system and with This PICSTART Plus Programmer upgrade is a PCB Microchip’s PICmicro MCU families. Included is a containing a PIC18F6720 part and replaces the limited C compiler (PICC LITE™ C Compiler) for the PIC17C44 inside a PICSTART Plus Programmer. The PIC16F84 family. firmware is upgradable using MPLAB IDE. It is no The MPASM™ Macro Assembler provides longer necessary to program a PIC17C44 and open programmable memory data files, listing files and the product enclosure to replace the PICSTART Plus special files required for symbolic debug. The MPLAB Programmer firmware. SIM Software Simulator allows the user to isolate code problems and debug firmware designs on PICmicro MCUs. It simulates the core functions, as well as most of the peripherals of the PICmicro MCU families. It is particularly suitable for optimizing algorithms where real-time emulation is not required. Ordering Information: DV003001 PICSTART® Plus Development Programmer UK003010 PICSTART® Plus Development Programmer Flash Reprogrammable Firmware Upgrade AC164024 68-pin PLCC Adapter Kit for PIC16C92X and PIC17C75X AC164027 84-pin PLCC Adapter Kit for PIC17C76X AC164031 28-pin DIP to 28-pin QFN Adapter AC164032 8-pin DFN to 8-pin DIP Adapter AC164033 18-pin DIP to 28-pin QFN Adapter AC164034 40-pin DIP to 44-pin QFN Adapter DS51034 “PICSTART® Plus Development Programmer Product Overview” (Available at: www.microchip.com) DS30177T-page 34 © 2005 Microchip Technology Inc.

Hardware PICkit™ 1 Flash Starter Kit The PICkit 1 Features Flash Starter Kit (cid:129) Small 3" x 4.5" circuit board with snap-off prototyping is a low-cost board development kit with an easy-to- (cid:129) Easy-to-use Windows® programming interface for use interface for programming Microchip’s 8/14-pin Flash family of programming microcontrollers Microchip’s (cid:129) Seven sequential tutorials, written in both Assembly 8/14-pin Flash and HI-TECH C, demonstrate how to use Microchip’s family of 8/14-pin Flash family of microcontrollers microcontrollers. (cid:129) Microchip’s Tips ‘n Tricks booklet provides efficient, This starter kit is low-cost design techniques using Microchip Flash designed to help the user get up to speed quickly using microcontrollers PICmicro® microcontrollers. (cid:129) “PICkit 1 Flash Starter Kit User’s Guide” (included The kit provides everything needed to program, on CD) evaluate and develop applications using Microchip’s (cid:129) Microchip’s MPLAB IDE software for a complete powerful 8/14-pin Flash family of microcontrollers. code development environment Instructions are provided in a series of seven tutorials (cid:129) HI-TECH PICC LITE™ C Compiler (contained on the that cover I/O, interrupts, A/D Converters, MPLAB IDE CD) comparators, data tables and timers. All source code files for the tutorials are furnished. PICkit™ 1 Flash Starter Kit Contents Code development and debugging is performed using Microchip’s powerful MPLAB® Integrated Development (cid:129) PICkit 1 Flash Starter Circuit Board with Environment (IDE). The MPLAB IDE is a seamless, 8-pin PIC12F675 integrated software development environment that (cid:129) PICkit 1 Flash Starter Kit CD includes an MPASM™ Macro Assembler, MPLAB SIM (cid:129) MPLAB® IDE (Integrated Development Software Simulator with symbolic debugger, Environment) CD color-coded source editor, project manager with (cid:129) “8-Pin Flash PIC® Microcontrollers Outperform high-level language debugging and concurrent support the Competition Tips ‘n Tricks” Booklet for development tools, including low-cost, in-circuit (cid:129) USB Interface Cable debuggers, full-featured, real-time emulators and programmers. The consistent and easy-to-use graphic (cid:129) PIC16F684 Sample user interface of the MPLAB IDE desktop allows for rapid switching between development, debugging and programming modes within a project. Ordering Information: DV164101 PICkit™ 1 Flash Starter Kit UK164101 PICkit 1 Flash Starter Firmware Upgrade Kit – includes v2.0 + firmware for use with the Signal Analysis PICtail™ Daughter Board (AC164120) and the PIC10F2XX Universal Programmer Adapter (AC163020) AC163020 PIC10F2XX Universal Programmer Adapter (seepage 37) AC163021 PIC10F2XX SOT-23 to DIP-8 Programmer Adapter Kit (seepage 37) DS40244 “PICkit™ 1 Flash Starter Kit Product Overview” (Available at www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 35

Development Systems Ordering Guide rfPIC® Development Kit 1 The rfPIC The transmitter modules are based on the Development Kit 1 rfPIC12F675 devices and support the same frequency provides design and modulation formats as the receivers. The engineers with transmitter modules feature button inputs for remote aneasy way control functions, as well as analog input to allow toevaluate evaluation of the A/D and comparator peripherals on unidirectional, the rfPIC12F675. Code development is achieved with remote sense and Microchip’s MPLAB® Integrated Development control wireless Environment (IDE). The microcontroller is easily links based on the programmed using the PICkit 1 Flash Starter Kit, with rfPIC12F675 and modules plugging into the PICkit 1 Flash Starter rfRXD0420/0920 devices. The kit is based on the development board in a similar manner as the receiver popular PICkit™ 1 Flash Starter Kit and consists of modules. modular building blocks for different transmitters and receivers that can be utilized for prototype systems or rfPIC® Development Kit 1 Contents to evaluate different options using Microchip products. (cid:129) PICkit™ 1 Flash Starter Kit The receiver modules are based on the rfRXD0420 and rfRXD0920 devices and are available in two (cid:129) 433.92 MHz Transmitter options supporting 315 MHz ASK and 433 MHz ASK. (cid:129) 315 MHz Transmitter These modules plug directly into the PICkit 1 Flash (cid:129) 433.92 MHz Receiver Starter development board, offering an easy way to (cid:129) 315 MHz Receiver evaluate the different receiver modules with (cid:129) rfPIC Software and Complete Documentation Microchip’s 8 and 14-pin Flash PIC® microcontrollers, (on CD) as well as a USB interface to a PC. The modules are also available for sale separately to allow a number of prototypes based on the same module without having to do an actual RF design. The design files for these modules are available to allow easy integration of the designs into a system. Ordering Information: DV164102 rfPIC® Development Kit 1 AC164101 rfPIC® Transmitter Module (433.92 MHz) AC164102 rfPIC® Transmitter Module (315 MHz) AC164103 rfPIC® Receiver Module (433.92 MHz) AC164104 rfPIC® Receiver Module (315 MHz) AC164105 rfPIC® Receiver Module – 5 Pack (433.92 MHz) AC164106 rfPIC® Receiver Module – 5 Pack (315 MHz) DS51409 “rfPIC® Development Kit 1 Product Overview” (Available at: www.microchip.com) DS30177T-page 36 © 2005 Microchip Technology Inc.

Hardware PIC10F2XX Programmers/Adapters Baseline Flash Microcontroller PIC10F2XX Universal Programmer Programmer Adapter The Baseline The PIC10F2XX Flash Universal Microcontroller Programmer Programmer Adapter provides (BFMP) is a simple PIC10F socket and easy to use support for both ICSP™ the SOT-23 and programmer DIP-8 packages. It intended to be allows interfacing used with any of to Microchip’s Microchip’s new low-cost family of baseline Flash programmers, PIC® microcontrollers. The BFMP provides a 6-pin inclusive of: linear ICSP header for standard ICSP support, as well PICkit™ 1 Flash as stand-alone programming support for the PIC10F Starter Kit, MPLAB® ICD 2, PICSTART® Plus family when paired with the PIC10F2XX Universal Programmer and the BFMP. Programmer Adapter, providing the least expensive method of programming. The BFMP utilizes USB and PIC10F2XX SOT-23 to DIP-8 does not require an external power supply. The Programmer Adapter Kit included Graphical User Interface (GUI) allows users to read, write and verify the microcontroller to be This is a kit programmed. consisting of (5) PIC10F206 SOT-23, (5) pin scramble boards and DIP pins. Once assembled, this will make the SOT-23 look like a standard 8P DIP and can be used directly in standard development tool sockets. Note that the PIC10F 8P DIP pinout is family-specific and differs from the standard 8P DIP pinout. This kit is NOT intended for production applications and should be used only as a method of early evaluation. Ordering Information: PG164101 Baseline Flash Microcontroller Programmer AC163020 PIC10F2XX Universal Programmer Adapter AC163021 PIC10F2XX SOT-23 to DIP-8 Programmer Adapter Kit © 2005 Microchip Technology Inc. DS30177T-page 37

Development Systems Ordering Guide Signal Analysis PICtail™ Daughter Board The Signal Analysis PICtail Daughter Board comes populated with a PIC16F684 MCU and two 25LC640 SPI™ compatible serial EEPROM memory devices. . Signal Analysis PICtail™ Daughter Board Contents (cid:129) Signal Analysis PICtail Daughter Board Printed Circuit Board (PCB) (cid:129) PICkit 1 Flash Starter Kit CD-ROM Version 2.0 (or later) (DS40049) Includes complete information on the Signal Analysis PICtail Daughter Board including: - “Signal Analysis PICtail™ Daughter Board User’s Guide” - Signal Analysis PC Program - Lesson Project Source and Object Code (cid:129) Preprogrammed PIC16C745 PICmicro® device The Signal Analysis PICtail™ Daughter Board works with USB Version 2.0.0 (or later) as an extension to the PICkit™ 1 Flash Starter Kit. When combined with the PICkit 1 Flash Starter Kit, version 2.0.0 or later firmware and signal analysis PC program, the Signal Analysis PICtail Daughter Board can perform signal analysis capabilities such as: (cid:129) Real-Time Strip Chart (cid:129) Oscilloscope (cid:129) Fast Fourier Transformation (FFT) (cid:129) Histogram (cid:129) Programming Ordering Information: AC164120 Signal Analysis PICtail™ Daughter Board UK164101 PICkit™ 1 Flash Starter Firmware Upgrade Kit (includes firmware V.2.0 or greater required for Signal Analysis PICtail Daughter Board) DS30177T-page 38 © 2005 Microchip Technology Inc.

Hardware N E W Ethernet PICtail™ Daughter Board Features (cid:129) IEEE 802.3 Compliant (cid:129) 10Base-T Ethernet (cid:129) RJ-45 Female Ethernet Connector (cid:129) Plug in compatible with: - PICDEM HPC Explorer (DM183022) - PICDEM Z 2.4 GHz Demonstration Board (DM163027-2)* - PICDEM FS USB Demonstration Board (DM163025)* * Future Support The Ethernet PICtail Daughter Board provides a cost- effective method of evaluating and developing Ethernet control applications. The board is designed for flexibility and can be plugged into any selection of Microchip’s standard PICDEM™ demonstration boards through a 28-pin PICtail pinout. The board is populated with the 28-pin ENC28J60 Ethernet controller which interfaces to the RJ-45 female connector. Ordering Information: AC164121 Ethernet PICtail™ Daughter Board © 2005 Microchip Technology Inc. DS30177T-page 39

Development Systems Ordering Guide N E W PICkit™ 2 Starter Kit The Microchip Features PICkit™ 2 Starter Kit provides a Key features of the PICkit 2 Starter Kit include: quick, easy and (cid:129) Easy to use Windows® programming interface for low-cost way to programming Microchip’s Flash family of start development, microcontrollers from concept to (cid:129) Lessons to demonstrate how to use Microchip’s prototype, using Flash family of microcontrollers selected (cid:129) Five Microchip Tips 'n Tricks Booklets provide Flash-based PIC® efficient, low-cost design techniques using Microchip microcontrollers. Flash microcontrollers (contained on the CD-ROM) The PICkit 2 Starter Kit is a complete “development system in a box”, (cid:129) “PICkit™ 2 Microcontroller Programmer User’s providing programming, evaluation and development in Guide” (included on CD-ROM) one simple design. (cid:129) FREE! Microchip’s MPLAB IDE software for a complete code development environment The kit provides everything needed to program, (cid:129) FREE! HI-TECH PICC Lite™ C Compiler (contained evaluate and develop applications using Microchip’s on the MPLAB IDE CD-ROM) powerful Flash family of microcontrollers. Lessons are provided that cover input/output, interrupts, A/D . PICkit™ 2 Starter Kit Contents Converters and timers. All source code files for the lessons are provided. (cid:129) PICkit™ 2 Microcontroller Programmer Code development and debugging is performed using (cid:129) Low Pin Count Demo Board (only with Microchip’s powerful MPLAB® Integrated Development DV164120) Environment (IDE). The MPLAB IDE is a seamless, (cid:129) PICkit™ 2 Starter Kit Software and integrated software development environment that Documentation CD includes the MPASM™ Assembler, MPLAB SIM (cid:129) MPLAB® IDE Software and Documentation CD Software Simulator with symbolic debugger, color- (cid:129) USB Interface Cable coded source editor, project manager with high-level language debugging and concurrent support for development tools, including low-cost in-circuit debuggers, full-featured real-time emulators and programmers. The consistent and easy-to-use graphic user interface of the MPLAB IDE desktop allows for rapid switching between development, debugging and programming modes within a project. Ordering Information: DV164120 PICkit™ 2 Starter Kit (includes Low Pin Count Demo Board featuring the new PIC16F690 for a programming out-of-the-box experience) PG164120 PICkit™ 2 Microcontroller Programmer DS30177T-page 40 © 2005 Microchip Technology Inc.

EMULATION This section contains the following major topics: MPLAB® ICE 2000 Modular In-Circuit Emulator.......................................................................42 MPLAB® ICE 4000 Modular In-Circuit Emulator.......................................................................43 MPLAB® ICE 2000/4000 Replacement Accessories ................................................................44 Ordering Information.................................................................................................................45 © 2005 Microchip Technology Inc. DS30177T-page 41

Development Systems Ordering Guide MPLAB® ICE 2000 Modular In-Circuit Emulator Microchip’s Triggers and breakpoints can be set on single events, universal multiple events and sequences of events. The MPLAB MPLAB ICE 2000 ICE 2000 analyzer is fully transparent and does not for PICmicro® require halting the processor to view the trace. In MCUs has been addition, MPLAB ICE 2000 supports code coverage designed with profiling. user requirements in mind. The Features system is (cid:129) Full-speed, real-time emulation small, portable, lightweight and (cid:129) Low-voltage emulation: 2.0V to 5.5V offers improved (cid:129) Trace memory: 32K x 128-bit performance and value. For quick hook-up to portable (cid:129) Break/trigger on internal registers or desktop PCs, MPLAB ICE 2000 easily connects to (cid:129) Program address software breakpoints the parallel (printer) port. (cid:129) Complex break/trigger on logic: program address Interchangeable processor modules allow the system and data; internal register address and data; access to be easily configured to emulate different processors. type; and eight external inputs This modular system consists of an emulator pod, a (cid:129) One external input and output logic analyzer trigger processor module, a device adapter and a transition (cid:129) Multi-level trigger (4 levels) socket (optional). Also included is Microchip’s MPLAB (cid:129) Pass and delay counters Integrated Development Environment (IDE) featuring MPASM™ Macro Assembler, MPLAB IDE (cid:129) Time-stamp Programmer’s Editor, Symbolic Debugger and Project (cid:129) Programmable clock: 32 kHz to 40 MHz Manager with built-in support for high-level languages (cid:129) Logic probes that support the Common Object Description format (cid:129) Parallel (printer) port communications (i.e., MPASM Assembler, MPLAB C17 and (cid:129) Code coverage profiling MPLAB C18 C Compilers). MPLAB ICE 2000 is a premium quality emulator system providing full-speed emulation, low-voltage MPLAB® ICE 2000 In-Circuit operation, 32K x 128-bit trace and unlimited Emulator Contents breakpoints. Complex triggering of the MPLAB ICE 2000 provides sophisticated trace analysis and (cid:129) MPLAB ICE 2000 with Tripod precision breakpoints. The trace analyzer captures (cid:129) MPLAB IDE Software and Documentation CD real-time execution addresses, opcodes and read/ (cid:129) Logic Probes writes of external data. It also traces all file register (cid:129) Parallel Cable RAM usage showing internal addresses and data (cid:129) Power Supply values, as well as all accesses to Special Function Registers, including I/O, timers and peripherals. Ordering Information: ICE2000 MPLAB® ICE 2000 Modular In-Circuit Emulator Pod (See ordering instructions onpage 45) DS51153 “MPLAB® ICE 2000 In-Circuit Emulator Product Overview” (Available at: www.microchip.com) DS30177T-page 42 © 2005 Microchip Technology Inc.

Emulation MPLAB® ICE 4000 Modular In-Circuit Emulator The MPLAB Features ICE4000 (cid:129) Full-speed emulation in-circuit emulator isintended to (cid:129) Low-voltage emulation down to 1.8 volts provide the product (or device limit) development (cid:129) 64K deep x 216-bit wide trace memory engineer with a (cid:129) Up to 2 MB of addressable memory complete (cid:129) Unlimited breakpoints microcontroller (cid:129) Complex break, trace and trigger logic design tool set for high-end PICmicro® (cid:129) Multi-level trigger up to 4 levels microcontrollers. Software control of the emulator is (cid:129) 48-bit time-stamp provided by the MPLAB Integrated Development (cid:129) Stopwatch Environment, which allows editing, building, (cid:129) External inputs downloading and source debugging from a single (cid:129) External output to sync with other instrumentation environment. (cid:129) USB port connection to PC The MPLAB ICE 4000 is a premium emulator system providing the features of MPLAB ICE 2000, but with increased emulation memory and high-speed performance for dsPIC30F and PIC18XXXX devices. MPLAB® ICE 4000 In-Circuit Emulator Contents Its advanced emulator features include complex triggering and timing, up to 2 MB of emulation memory, (cid:129) MPLAB ICE 4000 and the ability to view variables in real time. (cid:129) MPLAB IDE Software and Documentation CD (cid:129) Flex Cable The MPLAB ICE 4000 in-circuit emulator system has been designed as a real-time emulation system with (cid:129) Logic Probes advanced features that are typically found on more (cid:129) USB Cable expensive development tools. The PC platform and (cid:129) Power Supply Microsoft® Windows® 32-bit operating system were chosen to best make these features available in a simple, unified application. Ordering Information: ICE4000 MPLAB® ICE 4000 Modular In-Circuit Emulator Pod (See ordering instructions onpage 45) DS51321 “MPLAB® ICE 4000 High-Performance In-Circuit Emulator Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 43

Development Systems Ordering Guide MPLAB® ICE 2000/4000 Replacement Accessories Device Adapter Plugs MPLAB ICE 2000 Replacement Accessories Device adapter plugs are available as replacement accessories. The table below lists the replacement part Model number. Description Part Number Model ACICE0103 MPLAB ICE 2000 Power Supply Description Part Number ACICE0104 MPLAB ICE 2000 Logic Probes ACICE0201 MPLAB ICE 8P 300 mil Adapter Plug ACICE0105 MPLAB ICE 2000 Parallel Cable ACICE0202 MPLAB ICE 18P 300 mil Adapter Plug ACICE0106 MPLAB ICE Tripod ACICE0203 MPLAB ICE 20P 300 mil Adapter Plug ACICE0107 MPLAB ICE 2000 Flex Cable ACICE0204 MPLAB ICE 28P 300 mil Adapter Plug ACICE0108 MPLAB ICE 2000 USB/Parallel Adapter ACICE0205 MPLAB ICE 28P 600 mil Adapter Plug ACICE0206 MPLAB ICE 40P 600 mil Adapter Plug MPLAB ICE 4000 ACICE0207 MPLAB ICE 14P 300 mil Adapter Plug Replacement Accessories Transition Headers Model Description Part Number Transition socket headers can be purchased ACICE0401 MPLAB ICE 4000 Power Supply separately in the event that a customer needs ACICE0402 MPLAB ICE 4000 Logic Probes additional headers. The table below lists the headers available. ACICE0403 MPLAB ICE 4000 Slim Parallel Cable ACICE0106 MPLAB ICE Tripod Model Description Part Number ACICE0407 MPLAB ICE 4000 Flex Cable ACICE0301 8P SOIC Header Extra logic probe hooks can be purchased from: ACICE0302 14P SOIC Header E-Z-Hook: (800) 995-HOOK ACICE0303 18P SOIC Header Part Number: XM25 ACICE0304 20P SSOP Header Description: Micro Hook Adapter with 0.025 square pin ACICE0305 20P SOIC Header ACICE0306 28P SOIC Header ACICE0307 28P SSOP Header DS30177T-page 44 © 2005 Microchip Technology Inc.

Emulation Ordering Information MPLAB® ICE 2000 and An MPLAB ICE emulator system is ordered as separate components. Knowing the terms will make it MPLAB® ICE 4000 Emulator Systems easy to order and use the MPLAB ICE emulator system. Read more about each component. How to Order MPLAB ICE MPLAB ICE is easy to order, using these three steps. Emulator Pod 1. Determine the PICmicro® MCU device needed. The MPLAB ICE 2000 and MPLAB ICE 4000 are full-featured emulator pods, containing a main board, 2. Identify the PICmicro MCU package needed. with an additional board for expanded trace memory 3. Locate the correct MPLAB ICE component part and complex control logic. The MPLAB ICE 2000 pod numbers from the “Cross Reference” section on comes with a standard parallel interface cable that pages 103 through 136. connects the pod to the parallel port of the PC. A Complete MPLAB ICE System MPLAB ICE 4000 includes a USB interface cable that connects the pod to the USB port. MPLAB ICE is a modular emulator system with interchangeable components that allow easy Processor Module configuration of the system before emulation of The processor module is a PICmicro MCU, different PICmicro MCUs. Since each emulator device-specific module that is inserted into the supports package-specific emulation, customers need emulator pod. The processor module contains the to know which devices and packages they intend to emulator chip, logic and low-voltage circuitry. A flex emulate. Customers can then use the parts list in the cable extends from the processor module and is “Cross Reference” section starting on page 103 to connected to the device adapter at the target identify the part numbers required to complete an application. MPLAB ICE system. A complete system consists of: 1. An emulator pod (including, among other things, Device Adapter the host-to-pod parallel cable and power supply) The device adapter provides a common interface for 2. A processor module the PICmicro MCU being emulated. This adapter 3. A device adapter contains a special device that provides an oscillator 4. A transition socket clock, allowing the user to accurately emulate the RC characteristics of the PICmicro MCU. The device adapter provides emulation support for standard DIP and PLCC styles. For emulation support of other Processor Module packages, customers will need a transition socket in Emulator Pod addition to the device adapter. Transition Socket Device Adapter Transition Socket The transition sockets are available in various styles to MPLAB® ICE 2000 Emulator allow the common device adapter to be translated to support surface-mount packages, such as SOIC, SSOP, PQFP, TQFP and QFN. Host-to-Pod Processor Module Power Power Switch Flex Circuit Cable (on back) Device Adapter Emulator Pod Logic Probe Transition Socket Connector Indicator Lights MPLAB® ICE 4000 Emulator © 2005 Microchip Technology Inc. DS30177T-page 45

Development Systems Ordering Guide NOTES: DS30177T-page 46 © 2005 Microchip Technology Inc.

PROGRAMMING This section contains the following major topics: MPLAB® PM3 Universal Device Programmer...........................................................................48 In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II Device Programmer.....49 Programmer Adapter Kits and Accessories..............................................................................50 © 2005 Microchip Technology Inc. DS30177T-page 47

Development Systems Ordering Guide MPLAB® PM3 Universal Device Programmer The MPLAB PM3 Features Universal Device (cid:129) RS-232 or USB interface Programmer is easy-to- use and operates with a (cid:129) Integrated In Circuit Serial Programming™ (ICSP™) PC or as a stand-alone interface unit, and programs (cid:129) Fast programming time Microchip’s entire line of (cid:129) Three operating modes: PICmicro® devices, as - PC Host mode for full control well as the latest - Safe mode for secure data dsPIC30F DSC devices. The MPLAB PM3 features a - Stand-Alone mode for programming large and bright LCD unit (128 x 64 pixels) to display without a PC easy menus, programming statistics and status information. (cid:129) Complete line of interchangeable socket modules to support all Microchip devices and package options The MPLAB PM3 Programmer has exceptional (sold separately) programming speed to allow high production (cid:129) SQTPSM serialization for programming unique serial throughput, especially important for large memory numbers while in PC Host mode devices, and includes a Secure Digital/Multimedia Card slot for easy and secure data storage and transfer. (cid:129) An alternate DOS command-line interface is available for batch control The MPLAB PM3 Programmer is designed with (cid:129) Supports PRO MATE II Device Programmer socket 40 programmable socket pins, allowing each socket modules via adapter (sold separately) module to be configured to support many different (cid:129) Large easy-to-read display devices, requiring fewer socket modules to support the entire line of Microchip parts. The socket modules use (cid:129) Field upgradeable firmware allows quick new device multi-pin connectors for high reliability and quick support interchange. An adapter allows current PRO MATE® II (cid:129) Secure Digital (SD) and Multimedia Card (MMC) Device Programmer socket modules to be used on the external memory support MPLAB PM3 Programmer. (cid:129) Buzzer notification for noisy environments When connected to a PC-host system, either via a serial or USB port, the MPLAB PM3 Programmer is MPLAB® PM3 Universal Device Programmer seamlessly integrated with the MPLAB Integrated Contents Development Environment (IDE) providing an exceptionally user-friendly interface for the ultimate (cid:129) MPLAB PM3 Programming Unit control during programming. The MPLAB IDE includes (cid:129) Serial Cable for RS-232 PC Connection a full-featured macro assembler, powerful software (cid:129) USB Cable for USB PC Connection simulator with symbolic debugger, color-coded (cid:129) ICSP Cable programmer’s editor, project manager, high-level (cid:129) Power Supply And Power Cables language debugging and support for Microchip and (cid:129) MPLAB Integrated Development Environment CD selected third party development tools, including compilers, low-cost in-circuit debuggers and (cid:129) User’s Guide and Technical Documentation on CD full-featured in-circuit emulators. Ordering Information: DV007004 MPLAB® PM3 Universal Device Programmer AC164350 PRO MATE® II Device Programmer to MPLAB® PM3 Socket Module Adapter DS51444 “MPLAB® PM3 Universal Device Programmer Product Overview” (Available at: www.microchip.com) DS30177T-page 48 © 2005 Microchip Technology Inc.

Programming In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II Device Programmer Microchip offers an ICSP kit that can be used with The In-Circuit Serial Programming Socket module is a Microchip’s PROMATE II Device Programmer. complete kit, including connectors, cables and required Together, these two tools allow you to implement ICSP interface boards to allow a development engineer to with minimal effort and use the ICSP capability of implement ICSP with the PRO MATE II Device Microchip’s PICmicro® MCUs. Programmer. In-System Programming is a technique where a programmable device is programmed after the device ICSP™ Socket for PRO MATE® II is placed in a circuit board. ICSP is an enhanced ISP Device Programmer Contents technique implemented in Microchip’s PICmicro OTP (cid:129) ICSP Socket and Flash MCUs. Using only two I/O pins to serially input and output data makes ICSP easy-to-use and (cid:129) Cable less intrusive on the normal operation of the MCU. (cid:129) Power Supply (cid:129) Complete Documentation Ordering Information: AC004004 ICSP Socket Module © 2005 Microchip Technology Inc. DS30177T-page 49

Development Systems Ordering Guide Programmer Adapter Kits and Accessories 68-Pin PLCC Adapter Kit 28-Pin QFN Adapter Kit PIC16C92X/PIC17C75X 68-pin PLCC Adapter for PIC16CXX 28-pin QFN Adapter for PICSTART® Plus and PICSTART® Plus Development Programmer. Currently, this PRO MATE® II Programmers (with AC164012). header supports PIC16C92X and PIC17C75X. 84-Pin PLCC Adapter Kit PIC17C6X 84-pin PLCC Adapter for PICSTART® Plus Development Programmer. Ordering Information: AC002021 MPLAB® PM3 ICSP™ Cable AC004005 PRO MATE® II Device Programmer Elastomeric Connectors AC164024 68-Pin PLCC Adapter Kit AC164027 84-Pin PLCC Adapter Kit AC164031 28-Pin QFN Adapter Kit for 40-Pin ZIF Socket AC164032 8-Pin DFN Adapter Kit AC164033 28-Pin QFN Adapter Kit for 18-Pin ZIF Socket AC164034 44-Pin QFN Adapter Kit AC163020 6-Pin SOT-23/8P DIP Programmer Adapter DS30177T-page 50 © 2005 Microchip Technology Inc.

PICmicro® MCU DEMO BOARDS This section contains the following major topics: PICDEM™ Demonstration Boards............................................................................................52 PICDEM™ 2 Plus Demonstration Board...................................................................................53 PICDEM™ 4 Demonstration Board...........................................................................................54 PICDEM™ 18R Demonstration Kit............................................................................................55 PICDEM™ Mechatronics Demonstration Kit.............................................................................56 PICDEM™ MC Development Board.........................................................................................57 PICDEM™ MC LV Development Board....................................................................................58 PICDEM™ HPC Explorer Board...............................................................................................59 PICDEM™ USB Demonstration Kit...........................................................................................60 PICDEM™ FS USB Demonstration Board................................................................................61 PICDEM™ LCD Demonstration Board......................................................................................62 PICDEM™ Z 2.4 GHz Demonstration Kit..................................................................................63 PICDEM™ CAN-LIN Demonstration Boards.............................................................................64 PICDEM™ LIN Demonstration Kit.............................................................................................65 PICDEM.net™ Demonstration/Evaluation Board......................................................................66 Low-Power Solutions Demonstration Board..............................................................................67 © 2005 Microchip Technology Inc. DS30177T-page 51

Development Systems Ordering Guide PICDEM™ Demonstration Boards The PICDEM Demonstration Boards, PICDEM 1, PICDEM 3 and PICDEM17 are simple boards which PICDEM™ Demonstration Boards Contents demonstrate the capabilities of Microchip PICmicro® (cid:129) PICDEM Demonstration Board MCU families. See the “Cross Reference” section for (1, 3 or 17 as applicable) specific device support for each board. (cid:129) Product Samples All necessary hardware is included to run basic (cid:129) Demo/Tutorial Software (PICDEM 3 Demonstra- demonstration programs, which are supplied on a CD. tion Board is written in ‘C’ using the MPLAB The users can program the samples provided with the C Compiler demonstration version) PICDEM Demonstration Board on a PROMATE® II or (cid:129) Complete Documentation PICSTART® Plus Programmer and easily debug/test the sample code, or the user can connect the PICDEM Demonstration Board to the MPLAB® ICE and download the sample code to the emulator and debug/test the code. Additionally, a generous prototype area is available for user hardware. Ordering Information: DM163001 PICDEM™ 1 Demonstration Board DM163003 PICDEM™ 3 Demonstration Board DM173001 PICDEM™ 17 Demonstration Board DS30177T-page 52 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits PICDEM™ 2 Plus Demonstration Board The PICDEM 2 Features Plus Demonstration (cid:129) 2 x 16 LCD display Board is a powerful, low-cost (cid:129) Piezo sounder driven by PWM signal learning and (cid:129) Active RS-232 port demonstration (cid:129) On-board temperature sensor board. The board (cid:129) Sample PIC16F877 and PIC18F452 Flash comes with an microcontrollers active program (cid:129) MPLAB ICD connector loaded on the (cid:129) Generous prototyping area installed PIC18F452 microcontroller that provides real-time clock and local temperature display. The code to accomplish PICDEM™ 2 Plus Demonstration Board Contents all of these program features is provided unassembled, (cid:129) PICDEM 2 Plus Demonstration Board so the user can understand and dissect the programming algorithm, helping them to quickly learn. (cid:129) PIC16F877 and PIC18F452 Product Samples The user can then take advantage of the Flash-based (cid:129) Documentation microcontroller and its in-circuit debugger capability by cutting, pasting, rewriting or adding to the program to make their own modification (an MPLAB® ICD is required to do this). All of the microcontroller port pins are terminated at a connector header and space is provided in the generous prototyping area for project development work. Ordering Information: DM163022 PICDEM™ 2 Plus Demonstration Board © 2005 Microchip Technology Inc. DS30177T-page 53

Development Systems Ordering Guide PICDEM™ 4 Demonstration Board The PICDEM 4 low-cost in-circuit debuggers, full-featured real-time Demonstration Board emulators and programmers. The consistent and supports Microchip’s easy-to-use graphic user interface of the MPLAB IDE low pin count desktop allows for rapid switching between PICmicro® Flash development, debugging and programming modes microcontrollers, within a project. The MPLAB ICD 2 (DV164007) is including the PIC16F available separately. Microchip’s MPLAB IDE software and PIC18F families can be downloaded free-of-charge from the Microchip featuring nanoWatt web site. Technology. nanoWatt Technology Features refers to Microchip’s advanced PMOS Electrically (cid:129) RS-232 interface Erasable Cell (PEEC) process technology, circuit design, manufacturing and application techniques. (cid:129) 2 x 16 liquid crystal display (cid:129) In-Circuit Debugger (ICD) connector for The PICDEM 4 Demonstration Board can be used to programming via In-Circuit Serial Programming™ evaluate and demonstrate the capabilities of (ICSP™) technology or developing with the Microchip’s 8, 14 and 18-pin PIC12F, PIC16F and MPLAB ICD 2 PIC18F microcontrollers. The demonstration board showcases many features of low pin count parts, (cid:129) Eight (8) LEDs, four (4) potentiometers, three (3) including Local Interconnect Network (LIN) and motor push buttons control features using the Enhanced Capture/ (cid:129) PCB footprints for an EEPROM, H-Bridge motor Compare/PWM module (ECCP). Low-power operation driver and LIN transceiver is achieved with a super capacitor circuit and jumpers (cid:129) Support for Crystal, RC or Canned Oscillator modes allowing the on-board hardware to be disabled to (cid:129) Support for either 9-volt power adapter or battery, or eliminate current draw in this mode. hooks for a 5-volt, 100 mA regulated DC supply Tutorial firmware and samples of a PIC16F and (cid:129) Generous prototyping area and header for expansion PIC18F Flash microcontroller are included to assist the user in becoming familiar with the PICDEM 4 PICDEM™ 4 Demonstration Board Contents Demonstration Board and to demonstrate the unique features of the supported devices. (cid:129) PICDEM 4 Demonstration Board By connecting the PICDEM 4 Demonstration Board to (cid:129) Serial Cable the MPLAB® ICD 2, a designer can develop, simulate, (cid:129) PICmicro® Flash Microcontroller Samples debug and download code to the microcontroller using (cid:129) Sample Programs, Application Notes and Microchip’s powerful graphical MPLAB Integrated User’s Guide on CD Development Environment (IDE). MPLAB IDE is a seamless, integrated software development environment that includes an MPASM™ Macro Assembler, MPLAB SIM Software Simulator with symbolic debugger, color-coded source editor, project manager with high-level language debugging and concurrent support for development tools, including Ordering Information: DM163014 PICDEM™ 4 Demonstration Board DS51339 “PICDEM 4 Demonstration Board Product Overview” (Available at: www.microchip.com) DS30177T-page 54 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits PICDEM™ 18R Demonstration Kit This kit demonstrates the power and flexibility of PICDEM™ 18R Demonstration Kit Contents Microchip’s new ROMless PIC18C601/801 microcontrollers and will significantly speed up (cid:129) PICDEM 18R Demonstration Board development time for integrating these parts into an (cid:129) Product Samples end product. The ROMless demonstration board will (cid:129) CD allow several alternative types of memory to be evaluated with PICmicro® MCUs. It includes an (cid:129) Serial Cable MPLAB® ICD connector interface for the MPLAB ICD 2 (cid:129) Power Supply In-Circuit Debugger module, which allows low-cost (cid:129) Documentation debugging. Features (cid:129) Support for 68-pin PLCC PIC18C601 and 84-pin PLCC PIC18C801 devices (cid:129) 8-bit multiplexed (PIC18C601) and demultiplexed (PIC18C801) memory interfaces (cid:129) 16-bit Word Select mode and Byte Select mode memory interfaces (cid:129) 2 MB x 8, 1 MB x 16 JEDEC compliant Flash memory (cid:129) 128 KB x 8 SRAM, 64 KB x 16 JEDEC compliant SRAM memory support for PC downloadable executable code into SRAM (cid:129) Start execution on-the-fly, general purpose, user- configurable, PC downloadable external memory programmer host software (cid:129) Eight memory mapped LED outputs (cid:129) Two push button switches (cid:129) One analog potentiometer input; 64 KB I2C™ EEPROM and a 4-bit LCD connector Ordering Information: DM163006 PICDEM™ 18R Demonstration Kit DS39579 “PICDEM™ 18R PIC18C601/801 Demonstration Board Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 55

Development Systems Ordering Guide N E W PICDEM™ Mechatronics Demonstration Kit The PICDEM (cid:129) 5V regulator Mechatronics (cid:129) Optical speed sensor for Brushed DC Motor Demonstration Kit is (cid:129) 20-pin socket (compatible with all 8,14 and 20-pin an easy-to-use Flash devices) mechatronics development and Projects demonstration platform. The projects included in the kit cover: Mechatronics refers (cid:129) Switch debouncing and lighting an LED to implementing (cid:129) How to use comparators intelligent control in a mechanical (cid:129) How to read an analog sensor (temperature and light) system. Learn how to use PIC® microcontrollers to (cid:129) Brushed DC Motor speed control enhance or replace a mechanical design. (cid:129) Speed feedback: Back-EMF and optical The demonstration kit takes a hands-on approach to (cid:129) Stepper Motor control: single-stepping, half-stepping learning about mechatronics. Jumper wires are and micro-stepping provided in the kit and allow the user to experiment (cid:129) How to use the USART for RS-232 communication with connecting the PIC® microcontroller to various (cid:129) How to use the Capture, Compare, PWM module components on the board. These components include sensors, LEDs, human input devices and motor PICDEM™ Mechatronics drivers. The board comes with nine example projects Demonstration Kit Contents which include firmware, connection diagrams (for the wire jumpers) and schematics. (cid:129) PICDEM Mechatronics Board populated with the PIC16F917 Features (cid:129) Sample kit including the PIC16F690 and PIC12F509 Key features of the PICDEM Mechatronics (cid:129) Microchip screwdriver Demonstration Kit are: (cid:129) 10 wire jumpers (cid:129) PIC16F917 MCU with 8 MHz internal oscillator and (cid:129) PICDEM Mechatronics CD-ROM: User’s Guide, on-board LCD module (in addition to other standard project source code, PIC® MCU Communicator PIC MCU peripherals) GUI (serial interface example), MPLAB IDE (cid:129) Displays 8 LEDs and LCD (preconnected to the LCD module) Required Hardware (cid:129) Stepper Motor and Brushed DC Motors (cid:129) One of the following: (cid:129) Analog out temperature sensor (Microchip TC1047A) - MPLAB ICD 2 * and light sensor - PICkit™ 2 Microcontroller Programmer (cid:129) Light sensor (cid:129) 9-12 VDC power supply** (cid:129) 32.768 kHz crystal for time generation (cid:129) Serial Cable (cid:129) Human inputs: 4 tactile switches, 2 potentiometers * Microchip part # DV164007 includes the MPLAB ICD 2, (cid:129) Overcurrent protection circuit 9V power supply and serial cable (cid:129) ICSP™ and MPLAB® ICD 2 interface connector ** Microchip part # AC162039 recommended (cid:129) RS-232 interface Ordering Information: DM163029 PICDEM™ Mechatronics Demonstration Kit DS30177T-page 56 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits PICDEM™ MC Development Board Finally, users can develop their application with a simple graphical interface, known as the Motor Control Graphical User Interface (MC-GUI). The MC-GUI provides a quick and easy way for designers to configure and monitor their motor system parameters, such as motor type, motor speed, rotational direction, current, voltage, heat sink temperature and Fault status. Features (cid:129) Two sockets supporting 28 and 40-pin DIP devices (cid:129) Motor terminal strip (cid:129) 3-phase inverter power module (cid:129) Motion sensor inputs (cid:129) Speed control potentiometer (cid:129) Active RS-232 port The PICDEM MC Development Board provides designers with a quick method to evaluate and develop (cid:129) Full automatic protection of power circuits both AC and DC motor control applications utilizing (cid:129) Electrical isolation from power circuits Microchip’s family of 28 and 40-pin enhanced (cid:129) MPLAB ICD connector microcontrollers. The development board is ideal for (cid:129) FREE Motor Control GUI software beginning motor control designers, as well as those new to the PIC18F2331/2431/4331/4431 family of PICDEM™ MC motor control devices. Development Board Contents The development board provides a complete solution for prototyping motor control applications. Both (cid:129) PICDEM MC Development Board with a Brushless DC motors (BLDCs) and AC Induction preprogrammed (BLDC firmware) PIC18F4431 Motors (ACIMs) can be driven by the board and directly Device controlled through a simple hardware interface (cid:129) A 28-pin PIC18F2431 Microcontroller provided on the board itself. The board can also be (cid:129) RS-232 Cable configured in numerous ways, using jumpers and (cid:129) Software and Documentation CD containing the component selection to control a range of motor control MC-GUI, User’s Guide and other supporting designs, and can accommodate both AC and DC documents power inputs. With complete isolation between the control circuitry and power circuitry, users can safely plug-in the MPLAB® In-Circuit Emulator (ICE) or MPLAB In-Circuit Debugger (ICD) while high power is connected. Ordering Information: DM183011 PICDEM™ MC Development Board for PIC18F2331/2431/4331/4431 DS51463 “PICDEM™ MC Development Board Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 57

Development Systems Ordering Guide N E W PICDEM™ MC LV Development Board The PICDEM Features MC LV (cid:129) Motor Control Graphical User Interface (MC-GUI) Development Board (cid:129) Motor terminal strip provides a (cid:129) 3-phase voltage source inverter bridge cost-effective (cid:129) Motion sensor inputs method of (cid:129) Overcurrent protection, level programmable using evaluating and potentiometer developing (cid:129) Temperature sensor with I2C™ interface Sensored or (cid:129) Push button switches and master Reset Sensorless Brushless DC (cid:129) 9 LEDs, 3 for generic status indication and 6 for (BLDC) motor control applications. The board supports PWM indication Microchip’s 28-pin, PIC18F microcontrollers and (cid:129) Test points for motor current and back EMF sensing dsPIC30F Digital Signal Controllers. The board is (cid:129) Speed control potentiometer capable of controlling motors rated up to 48V and (cid:129) Active RS-232 port 2.2 Amps. (cid:129) 24V external power supply (optional) The development board also comes with two (cid:129) 3-phase, 24V BLDC low-voltage motor (optional) preprogrammed, Flash-based devices for easy (cid:129) MPLAB® ICD 2 connector development: the PIC18F2431 device will populate the (cid:129) MPLAB ICE connector 28-pin socket and the dsPIC30F3010 will ship in a separate sample box. Additionally, the board comes (cid:129) Example software and documentation CD-ROM with a free Motor Control Graphical User Interface (MC-GUI) which can set and modify all motor parameters. Custom programming and in-circuit debugging are facilitated with the ICD connector for Microchip’s MPLAB® ICD 2 In-Circuit Debugger, DV164004. Ordering Information: DM183021 PICDEM™ MC LV Development Board DS30177T-page 58 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits N E W PICDEM™ HPC Explorer Board Additional Features (cid:129) PIC18F8722, 128K Flash, 80-pin TQFP microcontroller (cid:129) Full pin breakout for easy wire wrap/prototyping (cid:129) Daughter board and MPLAB ICE 2000/4000 connector (with switch to disable on-board processor) (cid:129) 10 MHz crystal oscillator (to be used with internal PLL to provide 40 MHz operation) (cid:129) Convenient connection for MPLAB ICD 2 (In-Circuit Debugger) for in-circuit programming and debugging (cid:129) Power supply connector and programmable voltage regulator, operation capability from 2.0-5.5V (requires any standard 9-15V power supply (available separately) The PICDEM HPC Explorer Board is the latest (cid:129) Potentiometer (connected to 10-bit A/D, analog 64/80 TQFP demonstration board for evaluating input channel) Microchip Technology’s PIC18F and PIC18FXXJXX (cid:129) Temperature sensor demo included (illustrates families of devices. It comes populated with a Microchip’s award winning TC74 device) PIC18F8722 MCU. Direct connection support is (cid:129) 8 LEDs (connected to PORTD with jumper disable) available for the MPLAB® ICE 2000 and (cid:129) RS-232 port (9-pin D type connector, UART1) MPLAB ICE 4000 processor modules, plug-in modules and MPLAB ICD 2 In-Circuit Programmer. (cid:129) Reset button (cid:129) Bootloader button Software (cid:129) Extended PICtail™ Daughter Board connector to allow connection to standard and extended expansion boards The PIC18F8722 MCU is preprogrammed with (cid:129) Serial bootloader ready (see AN851) demonstration software which displays information on (cid:129) 32 kHz crystal for Real-Time Clock demonstration the Windows® HyperTerminal program via the serial port. To obtain the most recent and complete documentation Use the following settings: for this demonstration board, including: (cid:129) 57600 Baud - User’s Guide (cid:129) 8 Data Bits - Board Description (cid:129) No Parity - Board Schematics (cid:129) 1 Stop Bit - Source Code (cid:129) No Flow Control - Application Examples (cid:129) Auto-detect Terminal Emulation - Links to Web Seminars On power-up, PIC18F8722 will continuously display the Please refer to the following web site: LED states, potentiometer voltage, RB0 button state, http://www.microchip.com/HPCExplorer temperature and relative time in minutes and seconds. PICDEM™ HPC Explorer Board Contents Note: Pressing the RB0 button during power-up enables the bootloader. The LEDs can be (cid:129) PICDEM HPC Explorer Board toggled by pressing the 1 through 8 keys. (cid:129) Plug-in Module PCB Breakoff (attached to board) (cid:129) PICDEM HPC Explorer Board Information Sheet Ordering Information: DM183022 PICDEM™ HPC Explorer Board DS51540 “PICDEM™ HPC Explorer Board Information Sheet” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 59

Development Systems Ordering Guide PICDEM™ USB Demonstration Kit The PICDEM USB Demonstration Kit from Microchip demonstrates a PICmicro® microcontroller PICDEM™ USB Demonstration Kit Contents (PIC16C765) communicating to a PC using the USB (cid:129) PICDEM USB Demonstration Board with Large port. Prototype Area A traditional mouse, keyboard or joystick can be (cid:129) USB, Serial, PS-2 and Gameport Connectors connected to the USB port on a computer using the (cid:129) USB Support Firmware and Example Code preprogrammed board supplied in the kit. (cid:129) Documentation Features (cid:129) Status LEDs (cid:129) Out-of-the-box working demo (cid:129) Generous prototyping area (cid:129) PS-Port (cid:129) Gameport Ordering Information: DM163010 PICDEM™ USB Demonstration Kit DS30177T-page 60 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits N E W PICDEM™ FS USB Demonstration Board Features The demonstration board provides the following functions: (cid:129) Temperature sensor TC77 (connected to the I2C™ bus) (cid:129) Potentiometer (connected to RA0 input) for A/D conversion demonstrations (cid:129) 2 LEDs for status display (cid:129) 2 input switches (cid:129) Reset button (cid:129) 20 MHz crystal The PICDEM™ FS USB is a demonstration and (cid:129) Serial port connector/interface (for demonstrations of evaluation board for the PIC18F4550 family of Flash migration from legacy applications) microcontrollers with Full-Speed USB 2.0 interface. (cid:129) Connection to the MPLAB® ICD 2 In-Circuit Debugger The board contains a PIC18F4550 microcontroller in a (cid:129) Voltage regulation, with the ability to switch from 44-pin TQFP package, representing the superset of the external power supply to USB bus supply entire family of devices offering the following features: (cid:129) Expansion connector, compatible with the PICtail™ (cid:129) 48 MHz maximum operating speed (12 MIPS) Daughter Board standard (cid:129) 32 Kbytes of Enhanced Flash memory The board comes preloaded with a USB bootloader that (cid:129) 2 Kbytes of RAM (of which 1 Kbyte is dual port) demonstrates the Enhanced Flash memory capabilities (cid:129) 256 bytes of data EEPROM of the device in addition to allowing the user to reprogram the PIC18F4550 in-circuit without requiring (cid:129) Full-Speed USB 2.0 interface (capable of 12 Mbit/s use of an external programmer. A CD-ROM is also data transfers) including FS-USB transceiver and included in the kit, offering access to a wealth of voltage regulator documentation and information about the board, as well as application notes and software libraries for immediate support of the HID, CDC and Custom classes. For more information on the applications, tools and software libraries offered you, please refer to the Connectivity Design Center on the Microchip web site or simply link to: http://www.microchip.com/USB. PICDEM™ FS USB Demonstration Board Contents (cid:129) PICDEM FS USB Demonstration Board (cid:129) Software and Documentation CD (cid:129) USB Interface Cable Ordering Information: DM163025 PICDEM™ FS USB Demonstration Board © 2005 Microchip Technology Inc. DS30177T-page 61

Development Systems Ordering Guide N E W PICDEM™ LCD Demonstration Board Features (cid:129) Default device: PIC18F8490 (cid:129) Daughter board to support PIC16F91X and PIC18F6X90 (cid:129) Battery-based operation: 2-AAA, 3V Li (cid:129) Standard LCD glass (cid:129) EEPROM (cid:129) Thermistor (cid:129) MPLAB® ICD and MPLAB® ICE interface (cid:129) RS-232 (cid:129) Real-Time Clock (cid:129) PIC® microcontroller powered peripherals The PICDEM LCD Demonstration Board will (cid:129) POT and switches demonstrate the main features of the new LCD Flash 28, 40, 64 and 80-pin PICmicro® devices with power management features. The board will be populated PICDEM™ LCD Demonstration Board Contents with the PIC18F8490 and the other devices will be supported via a transition socket. A sample LCD glass (cid:129) PICDEM LCD Demonstration Board display will be included for customer prototyping. The (cid:129) Software and Documentation CD PICDEM LCD Demonstration Board will provide tutorial (cid:129) Microchip’s Recommended Glass Suppliers firmware, which will be on the included preprogrammed Sheet devices. The board will be shipped for “Plug & Play” operation. Ordering Information: DM163028 PICDEM™ LCD Demonstration Board DS30177T-page 62 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits N E W PICDEM™ Z 2.4 GHz Demonstration Kit The PICDEM™ Z ZigBee Protocol Stack Availability Demonstration Kit is an easy-to-use The ZigBee software stack is available from Microchip ZigBee™ technology under a no-cost license agreement. The source code wireless and license are available for download from the communication Microchip web site at www.microchip.com. protocol development and demonstration PICDEM™ Z 2.4 GHz Demonstration Kit Contents platform. The demonstration kit (cid:129) 2 PICDEM Z Motherboards includes the ZigBee (cid:129) 2 PICDEM Z 2.4 GHz RF Cards protocol stack and two (cid:129) Two 9V Alkaline Batteries PICDEM Z boards, each with an RF daughter card. (cid:129) Software and Documentation CD The demonstration kit is also equipped with a 6-pin modular connector to interface directly with Microchip’s MPLAB® ICD 2 In-Circuit Debugger (DV164005). With MPLAB ICD 2, the developer can reprogram or modify the PIC18 MCU Flash memory and develop and debug application code, all on the same platform. Microchip MPLAB IDE software is available for download on the Microchip web site at no charge. Features Key features of the PICDEM Z Demonstration Kit include: (cid:129) ZigBee software stack supporting RFD (Reduced Function Device), FFD (Full Function Device) and Coordinator (cid:129) PIC18LF4620 MCU featuring nanoWatt Technology, 64 KB Flash memory and robust integrated peripherals (cid:129) RF transceiver and antenna interface via daughter card for flexibility (cid:129) Supports 2.4 GHz frequency band via Chipcon CC2420 RF transceiver (cid:129) ICSP™ and MPLAB ICD 2 interface connector (cid:129) RS-232 interface (cid:129) 9V DC to 3.3V DC regulator (cid:129) Temperature sensor (Microchip TC77), LEDs and button switches to support demonstration Ordering Information: DM163027-2 PICDEM™ Z 2.4 GHz Demonstration Kit AC163027-1 PICDEM™ Z Motherboard AC163027-2 PICDEM™ Z 2.4 GHz RF Card DS5154 “PICDEM™ Zigbee™ Technology Demonstration Kit Product Overview” (Available at: www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 63

Development Systems Ordering Guide PICDEM™ CAN-LIN Demonstration Boards Microchip offers PICDEM CAN-LIN 3 supports: three similar (cid:129) 64-pin TQFP PIC18F6680 and 80-pin TQFP PICDEM PIC18F8680 devices CAN-LIN (cid:129) 20-pin SSOP PIC18F1320 and MCP201 LIN bus Demonstration transceiver Boards to support different The boards all share the following common features: PICmicro® (cid:129) On-board digital and analog +5V regulator for direct devices. All input from 12V AC/DC wall adapter demonstrate (cid:129) Two on-board CAN nodes and optional external CAN the main bus connectors features of the devices, especially those features of the integrated (cid:129) On-board LIN bus master and slave node CAN module. In addition to the CAN network, the (cid:129) Optional external LIN bus connector board also employs a LIN subnetwork using (cid:129) DB-9 RS-232 interface to IBM® compatible PC Microchip’s PIC16C43X and PIC18F1320 device (cid:129) Two optional ICSP™ MPLAB® ICD 2 connectors families. (cid:129) Optional header for LCD panel Each PICDEM CAN-LIN Demonstration Board includes (cid:129) CAN bus monitoring software for PC both firmware and PC software for simulating a CAN (cid:129) Devices preprogrammed with CAN bus monitoring network. The firmware comes preprogrammed on the firmware sample device. The PC software and documentation (cid:129) Generous prototyping area are furnished on a CD-ROM. Features PICDEM™ CAN-LIN 1, 2 and 3 Demonstration Boards Contents PICDEM CAN-LIN 1 supports: (cid:129) PICDEM CAN-LIN PCB (cid:129) 68-pin PLCC PIC18C658 and 84-pin PLCC (cid:129) Serial Cable PIC18C858 devices (cid:129) Sample Programs, Application Notes and (cid:129) 20-pin PDIP PIC16C432 with integrated LIN bus User’s Guide on CD transceiver PICDEM CAN-LIN 2 supports: (cid:129) 28-pin SPDIP PIC18F258 and 40-pin PDIP PIC18F458 devices (cid:129) 20-pin PDIP PIC16C432 with integrated LIN bus transceiver Ordering Information: DM163007 PICDEM™ CAN-LIN 1 Demonstration Board DM163011 PICDEM™ CAN-LIN 2 Demonstration Board DM163015 PICDEM™ CAN-LIN 3 Demonstration Board DS51418 “PICDEM™ CAN-LIN 1, 2 and 3 Demonstration Boards Product Overview” (Available at www.microchip.com) DS30177T-page 64 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits PICDEM™ LIN Demonstration Kit The PICDEM LIN Demonstration Kit demonstrates the capabilities of several Microchip microcontrollers using PICDEM™ LIN Demonstration Kit Contents the LIN bus protocol. It supports slave node (cid:129) PICDEM LIN Demonstration Boards (2) applications with PIC16C432, PIC16C433, (cid:129) PIC16F874 – used as master in the LIN PIC16C7XX and master node applications with communication PIC16X8X and PIC18FXX8. PIC16C432 and PIC16C433 have on-board LIN transceivers according (cid:129) PIC16C432, PIC16C433 – used as slaves in to LIN bus specification V1.2. LIN communication; both have on-board LIN transceiver This kit can be used to develop LIN hardware and (cid:129) Serial Cable software modules; demonstrate the LIN protocol in (cid:129) “PICDEM™ LIN User’s Guide” simple distribution network; evaluate the PIC16C432 LIN transceiver device; and quickly learn the LIN bus interface. Integrate/interface LIN bus into product for proof-of-concept demonstration. Features (cid:129) 18, 28 and 40-pin DIP sockets (Although three sockets are provided, only one device may be used at a time.) (cid:129) On-board +12V regulator for direct input from 12V (cid:129) RS-232C socket and associated hardware for direct connection to RS-232C interface (cid:129) CAN bus interface (cid:129) Control panel interface for LIN bus master (cid:129) RF stage for keyless entry function (cid:129) Seat memory unit (cid:129) Motor control slave unit Ordering Information: DM163005 PICDEM™ LIN Demonstration Kit © 2005 Microchip Technology Inc. DS30177T-page 65

Development Systems Ordering Guide PICDEM.net™ Demonstration/Evaluation Board The PICDEM.net A generous breadboarding area is also available for Demonstration experimental circuits or to add an embedded modem Board is an for dial-up capability, if desired. It includes several Internet/Ethernet status indicators, including a 16 x 2 LCD indicator. demonstration . board using the PICDEM.net™ Demonstration/Evaluation PIC18F452 Board Contents microcontroller and TCP/IP (cid:129) PICDEM.net Demonstration Board with firmware. It connects the PICmicro® MCU to the Local Firmware and PIC18F452 Microcontroller Area Network (LAN). It is a complete kit that is easy-to- (cid:129) CAT 5 Ethernet Cable use (a PC is required for setup). Interconnection to a (cid:129) DB9 Serial Cable network can be accomplished in less than one hour. (cid:129) Universal Power Supply The board conforms to the standard 40-pin pinout used (cid:129) Software Demo and “PICDEM.net™ Embedded by the PIC16F877 or PIC18F452. The firmware used Internet/Ethernet Demonstration Board User’s for the network interface was developed by Jeremy Guide” on CD Bentham of Iosoft Ltd. based on his book “TCP/IP Lean: Web Servers for Embedded Systems” (ISBN:157820108X). The PICDEM.net Demonstration Board is also equipped with a 6-pin modular connector to interface directly with the Microchip MPLAB® ICD 2 In-Circuit Debugger. With the addition of the MPLAB ICD 2 (sold separately), the developer can modify the on-board PICmicro microcontroller to meet the specific needs. Ordering Information: DM163004-LT PICDEM.net™ Demonstration/Evaluation Board (Textbook not included) Related Text: “TCP/IP Lean: Web Servers for Embedded Systems” (ISBN:157820108X) DS51240 “PICDEM.net™ Internet/Ethernet Demonstration Board Product Overview” (Available at www.microchip.com) DS30177T-page 66 © 2005 Microchip Technology Inc.

PICmicro® MCU Demo Boards and Kits N E W Low-Power Solutions Demonstration Board The Low-Power Features Solutions (cid:129) Fully functional ultrasonic range finder with LCD Demonstration display (PCB also supports four 7-segment LEDs) Board provides designers a (cid:129) DC boost circuit convenient and fun (cid:129) USART way to explore (cid:129) Connector for MPLAB® ICD 2 In-Circuit Debugger PICmicro® MCU (cid:129) Two power supply options: 9V power supply or nanoWatt features 9V battery within a functional ultrasonic range finder application. It (cid:129) Test points to measure system and PICmicro device features the PIC18F4620, Microchip Technology’s latest power consumption via current meter power-managed device. (cid:129) Three switches for input and a Reset switch and The development tool is ideal for learning nanoWatt 2 LEDs features and implementing system power reduction (cid:129) Microchip TC1047A Temperature Sensor techniques. The Low-Power Solutions Demonstration (cid:129) In-Circuit Debugger (ICD) connector for programming Board is part of the Workshop-in-a-Box 2, a complete via In-Circuit Serial Programming™ (ICSP™) nanoWatt training kit designed for self-paced and technology or developing with the MPLAB® ICD 2 instructor led training. . The Low-Power Solutions Demonstration Board CD Low-Power Solutions includes three self-paced, step-by-step lab exercises, Demonstration Board Contents using the PIC18F4620, which illustrate the following concepts: nanoWatt features to reduce power (cid:129) Low-Power Solutions Demonstration Board consumption, improving system power consumption (cid:129) Software and Documentation CD and improving board performance. Ordering Information: DM163026 Low-Power Solutions Demonstration Board DS51521 “Low-Power Solutions Demonstration Board Product Overview” © 2005 Microchip Technology Inc. DS30177T-page 67

Development Systems Ordering Guide NOTES: DS30177T-page 68 © 2005 Microchip Technology Inc.

dsPIC® DSC DEVELOPMENT BOARDS, KITS This section contains the following major topics: dsPICDEM™ Starter Development Board.................................................................................70 dsPICDEM™ 28-Pin Starter Development Board.....................................................................71 dsPICDEM™ 1.1 General Purpose Development Board..........................................................72 dsPICDEM™ 2 Development Board.........................................................................................73 dsPICDEM™ MC1 Motor Control Development Board.............................................................74 dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards......................75 © 2005 Microchip Technology Inc. DS30177T-page 69

Development Systems Ordering Guide dsPICDEM™ Starter Development Board The low-cost dsPICDEM™ Starter Development Board The dsPICDEM Starter Development Board is allows the user to easily validate a development tool delivered with a demo application that uses the digital setup using the dsPIC30F. It has a power supply potentiometer to generate audio tones. This output can regulator, crystal oscillator, MPLAB® ICD header, serial be connected into the 12-bit ADC for measurement. port, LEDs, push buttons, potentiometer and a prototyping area. In addition, all pins on the dsPIC® dsPICDEM™ Starter Development Board Contents DSC device are brought out to a terminal block for access. (cid:129) dsPICDEM Starter Development Board (cid:129) Documentation Features (cid:129) 5V power supply split at the regulator to provide a separate, decoupled analog supply voltage, useful in designs taking advantage of the 12-bit A/D Converter. (cid:129) Analog peripherals including an MCP41010 digital potentiometer used as a DAC to generate signals, and a MCP6022 to provide output filtering for the DAC and an input filter for the 12-bit A/D. The filter cutoff frequencies are set to 4 kHz to allow telephone quality signals. Ordering Information: DM300016 dsPICDEM™ Starter Development Board DV164030 MPLAB® ICD 2 with dsPICDEM™ Starter Development Board DS51430 “dsPICDEM™ Starter Development Board Product Overview” (Available at www.microchip.com) DS30177T-page 70 © 2005 Microchip Technology Inc.

dsPIC® DSC Development Boards, Kits dsPICDEM™ 28-Pin Starter Development Board Features (cid:129) dsPIC30F2010 28-pin SDIP sample device and socket (cid:129) Power input from 9V supply (cid:129) Connector for MPLAB ICD 2 In-Circuit Debugger (cid:129) RS-232 interface (cid:129) Header for access to all device I/O pins (cid:129) Layout pad for 28-pin SOIC device (cid:129) Prototyping area (cid:129) Power-on demo program demonstrating interrupts, device I/O and UART communication (cid:129) A tutorial program in Assembly code showing the user how to set up a project in MPLAB IDE The low-cost dsPICDEM 28-Pin Starter Development dsPICDEM™ 28-PIn Starter Board allows the user to easily validate a development Development Board Contents tool setup using a 28-pin SDIP or SOIC dsPIC30F (cid:129) dsPICDEM 28-pin Starter Development Board device. The development board has a socketed (cid:129) Documentation on CD dsPIC30F2010 digital signal controller, power supply regulator, crystal oscillator, MPLAB® ICD header, serial port, power-on indicator, Reset push button, 28L SOIC layout pad and a prototyping area. Ordering Information: DM300017 dsPICDEM™ 28-Pin Starter Development Board DS51458 “dsPICDEM™ 28-Pin Starter Development Board Product Overview” (Available at www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 71

Development Systems Ordering Guide dsPICDEM™ 1.1 General Purpose Development Board The dsPICDEM 1.1 Features General Purpose (cid:129) dsPIC30F6014 MCU plug-in sample Development Board provides (cid:129) Serial communication channels interface the application (two UARTs, SPI™, CAN, RS-485) designer with a (cid:129) Si3000 codec with line in/out jacks low-cost (cid:129) General purpose prototyping area with expansion development tool to header become familiar (cid:129) 122 x 32 dot addressable LCD with the dsPIC30F (cid:129) MPLAB ICD 2 and MPLAB ICE 4000 emulator 16-bit architecture, high-performance peripherals and support powerful instruction set. (cid:129) LEDs, switches and potentiometers The board features an active demonstration program (cid:129) Temperature sensor loaded on the installed dsPIC30F6014 device. Several (cid:129) Separate digital and analog voltage regulators program functions are selectable via a menu system displayed on the LCD. These include: temperature and (cid:129) Digital potentiometer for DAC capability voltage measurements, frequency domain characteristics of a sine-wave signal generated dsPICDEM™ 1.1 General Purpose on-board from a digital potentiometer, FIR and IIR Development Board Contents digital filter selections and DTMF tone generation using (cid:129) dsPICDEM 1.1 General Purpose Development the codec interface peripheral (external speaker Board with Preprogrammed dsPIC30F Device required). (cid:129) RS-232 Cable Also included is a simple tutorial written in Assembly (cid:129) Power Supply language. Users can create a project, assemble and link the code, program and/or debug the code using (cid:129) Example Software and Documentation on CD Microchip’s MPLAB® IDE (Integrated Development Environment) – included free, and an MPLAB ICD 2 In-Circuit Debugger – available separately. The development board serves as an ideal prototyping tool to quickly develop and validate key design requirements. Ordering Information: DM300014 dsPICDEM™ 1.1 General Purpose Development Board DV164032 MPLAB® ICD 2 with dsPICDEM 1.1 General Purpose Development Board DS51433 “dsPICDEM™ 1.1 General Purpose Development Board Product Overview” (Available at www.microchip.com) DS30177T-page 72 © 2005 Microchip Technology Inc.

dsPIC® DSC Development Boards, Kits N E W dsPICDEM™ 2 Development Board The dsPICDEM™ 2 Features Development Board is a development and evaluation Key features of the dsPICDEM 2 Development Board tool that helps you create include: embedded applications (cid:129) Multiple sockets for 18, 28 and 40-pin PDIP and using dsPIC30F Digital SPDIP devices Signal Controllers. Sockets (cid:129) Sample application programs complete with are provided for 28 and MPLAB® IDE workspace and project files provided 40-pin devices in the motor for supported dsPIC30F devices control family and 18, 28 (cid:129) dsPIC30F4011 40-pin PDIP sample device installed and 40-pin devices in the on the board general purpose and sensor (cid:129) 5V regulator provides VDD and AVDD from a 9V DC family. The supported power supply devices are shown in the table below. (cid:129) MPLAB ICD 2 In-Circuit Debugger ready: The board includes a sample dsPIC30F4011 Digital - Options for selecting alternate debugging Signal Controller in the 40-pin motor control socket, a channels power supply regulator, crystal oscillators for each set of (cid:129) MPLAB ICE 4000 ready sockets, an ICD connector for the MPLAB® (cid:129) RS-232 interface ICD 2 In-Circuit Debugger and both RS-232 and CAN ports for external communication. In addition, the board (cid:129) Controller Area Network (CAN) interface is populated with prototyping hardware, including LED (cid:129) Temperature sensor and analog potentiometer to indicators, push button switches, a potentiometer, a simulate A/D inputs temperature sensor and a 2x16 LCD screen. All pins on (cid:129) 2 push button switches and 2 LED indicators to all the device sockets are accessible through headers. simulate digital input and output (cid:129) 2 x 16 ASCII Character LCD with SPI™ interface dsPIC30F Device Supported Packages (cid:129) Access to all pins on the dsPIC30F device sockets Motor Control via 2 x 40-pin prototyping header (header shown in dsPIC30F2010 28-pin SPDIP picture is not provided with the board) dsPIC30F3010 28-pin SPDIP dsPIC30F4012 28-pin SPDIP dsPICDEM™ 2 Development Board Contents dsPIC30F3011 40-pin PDIP (cid:129) dsPICDEM 2 Development Board with dsPIC30F4011 40-pin PDIP dsPIC30F4011 device Sensor Family (cid:129) dsPICDEM 2 Sample Kit (including dsPIC30F2011 18-pin PDIP dsPIC30F3012 and dsPIC30F3014 dsPIC30F3012 18-pin SPDI (cid:129) Software and Documentation CD dsPIC30F2011 28-pin SPDIP dsPIC30F3013 28-pin SPDIP General Purpose Family dsPIC30F3014 40-pin PDIP dsPIC30F4013 40-pin PDIP Ordering Information: DM300018 dsPICDEM™ 2 Development Board DS70147 “dsPICDEM™ 2 Development Board Product Overview” (Available at www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 73

Development Systems Ordering Guide dsPICDEM™ MC1 Motor Control Development Board The high-voltage power module is optimized for 3-phase motor applications that require DC bus voltages up to 400 volts and can deliver up to 1 kW power output. The high-voltage module has an active power factor correction circuit that is controlled by the dsPIC30F device. This power module is intended for AC induction motor and power inverter applications that operate directly from the AC line voltage. The MC1 Motor Control Development Board provides the application developer with three main components Features for quick prototyping and validation of BLDC, PMAC and ACIM applications. The three main components (cid:129) dsPIC30F6010 motor control MCU-based board are: dsPIC30F motor control main board, 3-phase, (cid:129) 3-phase, low-voltage power module (optional) low-voltage power module and 3-phase, high-voltage (cid:129) 3-phase, high-voltage power module (optional) power module (cid:129) Heat sink for ambient cooling of power sections The main control board contains the dsPIC30F6010 (cid:129) Full automatic protection of power circuits (but also supports all dsPIC® DSC motor control (cid:129) Electrical isolation from power circuits variances), various peripheral interfaces and a custom interface header system, which allows different motor (cid:129) Many options for motor feedback signals power modules to be connected to the PCB. The control board also has connectors for mechanical dsPICDEM™ MC1 Motor Control position sensors, such as incremental rotary encoders Development Board Contents and hall effect sensors, and a breadboard area for custom circuits. The main control board receives its (cid:129) dsPICDEM MC1 Motor Control Development power from a standard plug-in transformer. Board with Preprogrammed dsPIC30F Device (cid:129) RS-232 Cable The low-voltage power module is optimized for 3-phase motor applications that require a DC bus voltage less (cid:129) Power Supply than 50 volts and can deliver up to 400W power output. (cid:129) Example Software and Documentation on CD The 3-phase, low-voltage power module is intended to power BLDC and PMAC motors. Ordering Information: DM300020 dsPICDEM™ MC1 Motor Control Development Board DM300021 dsPICDEM™ MC1H 3-Phase High-Voltage Power Module DM300022 dsPICDEM™ MC1L 3-Phase Low-Voltage Power Module AC300020 24V BLDC Motor AC300021 3-Phase ACIM MA18F4431 PIC18F4431 Plug-in Module DS51429 “dsPICDEM™ MC1 Motor Control Development System Product Overview” (Available at www.microchip.com) DS30177T-page 74 © 2005 Microchip Technology Inc.

dsPIC® DSC Development Boards, Kits dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards The dsPICDEM.net 1 Features and dsPICDEM.net 2 (cid:129) dsPIC30F6014 plug-in sample Connectivity Development (cid:129) 10baseT ethernet MAC and PHY interface Boards provide the (cid:129) PSTN interface with DAA/AFE chipset application developer (cid:129) Serial communication channels interface (UART and a basic platform for CAN) developing and (cid:129) External I2C™ EEPROM memory for storing evaluating both constants connectivity and non- (cid:129) External 64K x 16 SRAM memory connectivity-based requirements. The dsPICDEM.net (cid:129) General purpose prototyping area with expansion Development Boards provide the hardware circuitry for header supporting both the Public Switched Telephone Network (PSTN) and 10baseT MAC/PHY interfaces. The PSTN (cid:129) Dual channel digital potentiometer interface hardware on the dsPICDEM.net 1 Development (cid:129) 2 x 16 LCD display Board is suited for FCC/JATE compliancy. CTR-21 (cid:129) MPLAB® ICD 2 and MPLAB ICE 4000 emulator compliancy is supported on the dsPICDEM.net2 support Development Board. (cid:129) LEDs, switches and potentiometers The board comes with an ITU-T compliant V.22bis/V.22 (cid:129) Temperature sensor modem demonstration module preprogrammed on the installed dsPIC30F6014 device. This demo, provided dsPICDEM.net™ 1 and dsPICDEM.net 2 with full source code, enables the user to connect and Connectivity Development Boards Contents transfer data between the dsPIC® DSC Soft Modem and an ITU-T compliant reference modem. The modem (cid:129) dsPICDEM.net Connectivity Development Board can be configured for either the Originate or Answer with Preprogrammed dsPIC30F6014 Device mode of operation. Configuration and control of the (cid:129) RS-232 Cable dsPIC DSC Soft Modem demo is supported with an (cid:129) CAT 5 Crossover Cable optimized AT command set which is entered into a (cid:129) Power Supply suitable communication program running on the PC, (cid:129) Example Software and Documentation on CD such as HyperTerminal, and communicated to the dsPIC® DSC device over a RS-232 serial channel. Also included are the CMX-MicroNet WEB and FTP Server programs, which demonstrate two TCP/IP protocol-based applications over the 10baseT Ethernet Datalink layer. Ordering Information: DM300004-1 dsPICDEM.net™ 1 Connectivity Development Board (supporting FCC/JATE PSTN, Ethernet NIC) DM300004-2 dsPICDEM.net™ 2 Connectivity Development Board (supporting CTR-21 PSTN, Ethernet NIC) DS51431 “dsPICDEM.net™ 1 and dsPICDEM.net™ 2 Connectivity Development Boards Product Overview” (Available at www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 75

Development Systems Ordering Guide NOTES: DS30177T-page 76 © 2005 Microchip Technology Inc.

ANALOG AND MIXED-SIGNAL DEMO BOARDS AND KITS This section contains the following major topics: PICDEM™ MSC1 Demonstration Kit........................................................................................78 PICDEM™ MSC1 Daughter Boards..........................................................................................79 MCP41XXX/42XXX Digital Potentiometer Evaluation Board....................................................80 MXDEV® 1 Analog Evaluation System Driver Board................................................................81 MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit....................82 MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit....................83 Fan Controllers and Serial Temperature Sensor Demo Boards................................................84 MCP2510 CAN Developer’s Kit ................................................................................................85 MCP250XX CAN I/O Expander Developer’s Kit........................................................................86 MCP2120/2150 Infrared Developer’s Kit...................................................................................87 SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit.............................................88 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360.....................89 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360 and MCRF45X.....90 Interface Products..........................................................................................................................91 Linear Products..............................................................................................................................91 Mixed-Signal Products...................................................................................................................92 Power Management Products........................................................................................................93 Thermal Management Products.....................................................................................................94 Analog Software Tools...................................................................................................................95 © 2005 Microchip Technology Inc. DS30177T-page 77

Development Systems Ordering Guide PICDEM™ MSC1 Demonstration Kit The PICDEM Features MSC1 (cid:129) Demonstrates all the PIC16C781/782 peripherals Demonstration Kit with its PC-based (cid:129) Large breadboard area Graphical User (cid:129) Easy-to-use PC-based GUI for: Interface (GUI) - Configuration of peripheral blocks software serves as - Download configuration to hardware a demonstration - Save configuration setup and import into board for the MPLAB® IDE PIC16C781/782 microcontrollers. The user can configure the PIC16C781/782 from the easy-to-use PC software and PICDEM™ MSC1 Demonstration Kit Contents download it to the microcontroller to evaluate the (cid:129) PICDEM MSC1 Demonstration Board various peripherals and interconnect configurations. (cid:129) Jumper Wires The GUI gives instant access to the PIC16C781/782 peripherals, allowing on-the-fly configuration changes (cid:129) Serial Cable by means of an RS-232 link between the PC and the (cid:129) CD with GUI Interface Program evaluation board. Initialization assembly code, corresponding to the selected configuration, can be built using the supplied code generator. Developers can use the code generation to perform an entire configuration using the evaluation tool and save it as a disk file. Ordering Information: DM163012 PICDEM™ MSC1 Demonstration Kit DS30177T-page 78 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits PICDEM™ MSC1 Daughter Boards The following daughter boards, available separately, PICDEM™ MSC1 Delta-Sigma ADC demonstrate additional capabilities of the Daughter Board PIC16C781/782 microcontrollers. The PICDEM™ MSC1 Delta-Sigma ADC Daughter PICDEM™ MSC1 Switch Mode Power Supply Board, in combination with the PICDEM MSC1 (SMPS) Daughter Board Demonstration Board, serves as a demonstration and evaluation kit for designing high-resolution, The PICDEM™ MSC1 Switch Mode Power Supply Delta-Sigma Analog-to-Digital Converters using the (SMPS) Daughter Board, in combination with the PIC16C781/782. The daughter board has the following PICDEM MSC1 Demonstration Board, is a complete features: demonstration and evaluation kit for designing Switch (cid:129) All the components required to implement an 8 to mode power supplies using the PIC16C781/782. The 16-bit Delta-Sigma ADC daughter board can be configured for the following Switch mode power supply topologies: (cid:129) An RCA connector for connecting an external sensor (cid:129) A generous prototyping area for building signal (cid:129) Boost: Output voltage greater than the supply voltage conditioning circuitry (cid:129) Buck: Output voltage less than the supply voltage (cid:129) An on-board temperature sensor for a demonstration (cid:129) Buck-Boost: Output voltage less than or greater than input to the ADC the supply voltage (cid:129) Invert: Negative output voltages PICDEM™ MSC1 Flow Rate Sensor Daughter Board PICDEM™ MSC1 Infrared (IR) Driver Daughter Board The PICDEM™ MSC1 Flow Rate Sensor Daughter Board, in combination with the PICDEM MSC1 The PICDEM™ MSC1 Infrared (IR) Driver Daughter Demonstration Board, is a complete demonstration kit Board, in combination with the PICDEM MSC1 for a high sensitivity, hot-wire anemometer styled flow Demonstration Board, serves as a demonstration and rate sensor using the PIC16C782. evaluation kit for designing a high-power, IR remote control transmitter using the PIC16C782. The daughter PICDEM™ MSC1 Daughter Boards Contents board, in combination with the included IR receiver, implements both receive and transmit sections of a (cid:129) PICDEM MSC1 Daughter Board Pulse-Width Modulation (PWM) IR remote control (cid:129) Complete Documentation system. Ordering Information: AC163001 PICDEM MSC1 Switch Mode Power Supply (SMPS) Daughter Board AC163002 PICDEM MSC1 Infrared (IR) Driver Daughter Board AC163003 PICDEM MSC1 Delta-Sigma ADC Daughter Board AC163004 PICDEM MSC1 Flow Rate Sensor Daughter Board © 2005 Microchip Technology Inc. DS30177T-page 79

Development Systems Ordering Guide MCP41XXX/42XXX Digital Potentiometer Evaluation Board The MCP41XXX/42XXX Evaluation Board is a MCP41XXX/42XXX Digital Potentiometer demonstration and evaluation tool for Microchip Evaluation Board Contents Technology’s MCP41XXX/42XXX digital potentiometers. The MCP41XXX/42XXX Evaluation (cid:129) MCP41XXX/42XXX Evaluation Board Board is designed to be used in conjunction with the (cid:129) Removable Prototype Board MXDEV® Evaluation System. When connected to the (cid:129) MCP41XXX/42XXX Samples and driver board with the included microcontroller installed, Reprogrammable Microchip Flash PICmicro® this evaluation board allows for the programming and MCU evaluation of the MCP41XXX/42XXX digital potentiometer in a variety of applications. (cid:129) MXLAB® IDE ADC Software (cid:129) RS-232 Cable Some of the applications that can be used for evaluation of the MCP41XXX/42XXX digital (cid:129) 9V DC Power Supply potentiometers include an offset circuit, low-pass filter (cid:129) Documentation, including the “MCP42XXX and gain circuits. A removable prototype area is Evaluation Board User’s Guide” available for quick-turn circuit evaluation. Evaluation of other operations, such as daisy chain, shutdown and Reset, are also available. Software tools for the digital potentiometer and ADC are also provided for evaluation. Ordering Information: DV42XXX MCP41XXX/42XXX Digital Potentiometer Evaluation Board DS30177T-page 80 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits MXDEV® 1 Analog Evaluation System Driver Board The MXDEV 1 Analog Evaluation System gives system The MXDEV 1 Analog Evaluation System Driver Board designers the ability to control Microchip stand-alone contains three different PICmicro® microcontroller analog devices, acquire data and then analyze the data sockets (28-pin, 18-pin and 8-pin), so that users can using strip-charts, histograms and Fast Fourier choose the PICmicro MCU most suited to their Transforms (FFTs). User-friendly data analysis application. It also includes an LCD display, an LED software is included with the device-specific daughter display socket, SRAM for data storage and an RS-232 boards. interface. The LCD display can display information, such as configuration data and acquisition data from The evaluation system consists of two parts: a driver the daughter board. board, which performs the data analysis and connects to a PC for subsequent analysis and display and a The daughter board kits contain the device to be daughter board, which plugs into the driver board and evaluated and a PIC16F876 Flash microcontroller contains the device to be evaluated. Device-specific containing device-specific code. The microcontroller software is included. then plugs into one of the sockets on the DVMCPA. Code is also provided that shows how to interface the In addition to the ability of the driver board to work with PIC16C54 and the PIC12C509 with the ADC. device-specific daughter boards, users can create their own daughter boards based on their own design requirements. In addition, a prototype area on the MXDEV® 1 Analog Evaluation System driver board is available for user-designed circuits that Driver Board Contents could be used in place of the daughter boards. (cid:129) Driver Board (cid:129) Microcontroller Samples (cid:129) RS-232 Cable (cid:129) MXLAB® IDE ADC Software (cid:129) Two Power Supplies (cid:129) Documentation, including the “Analog Evaluation System Driver Board User’s Guide” Ordering Information: DVMCPA MXDEV® 1 Analog Evaluation System Driver Board © 2005 Microchip Technology Inc. DS30177T-page 81

Development Systems Ordering Guide MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit The MXDEV 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit supports the following MXDEV® 1 MCP3XXX Single/Dual ADC devices: MCP3001, MCP3002, MCP3201, MCP3202 Evaluation System Daughter Board Kit Contents and MCP3301. (cid:129) MXDEV 1 MCP3XXX Single/Dual ADC This kit includes jumper-selectable options for Daughter Board maximum flexibility. Choices include: (cid:129) Filter Boards (cid:129) Selection of the signal source between the on-board (cid:129) Samples for all Supported A/D Converts and potentiometer and an external source. Preprogrammed PICmicro® MCU for use in the (cid:129) Selection of the ADC reference voltage between the Driver Board on-board VREF and an external source. (cid:129) Adapter Plugs (cid:129) Selection between single-ended and pseudo- (cid:129) MXLAB® IDE ADC Software differential inputs (depending on the device being (cid:129) Documentation, including the “MCP3XXX A/D evaluated). Converter Evaluation Kit User’s Guide” There is a prototype area on the board for additional circuitry as needed. Ordering Information: DV3201A MXDEV® 1 MCP3XXX Single/Dual ADC Evaluation System Daughter Board Kit DS30177T-page 82 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit The MXDEV 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit supports the following MXDEV® 1 MCP3XXX Quad/Octal devices: MCP3004, MCP3008, MCP3204, MCP3208, Evaluation System Daughter Board Kit Contents MCP3302 and MCP3304. (cid:129) MCP3XXX Quad/Octal Daughter Board This kit includes jumper-selectable options for (cid:129) Filter Boards maximum flexibility. Choices include: (cid:129) Samples for all Supported A/D Converts and (cid:129) Selection of the signal source between the on-board Preprogrammed PICmicro® MCU for use in the potentiometer and an external source. Driver Board (cid:129) Selection of the ADC reference voltage between the (cid:129) Adapter Plugs on-board VREF and an external source. (cid:129) MXLAB® IDE ADC Software (cid:129) Selection between single-ended and pseudo- (cid:129) Documentation, including the “MCP3XXX A/D differential inputs (depending on the device being Converter Evaluation Kit User’s Guide” evaluated). There is a prototype area on the board for additional circuitry as needed. Ordering Information: DV3204A MXDEV® 1 MCP3XXX Quad/Octal ADC Evaluation System Daughter Board Kit © 2005 Microchip Technology Inc. DS30177T-page 83

Development Systems Ordering Guide Fan Controllers and Serial Temperature Sensor Demo Boards TC642EV – Evaluation Kit for Brushless TC650DEMO – Fan Controller Demo Board for DC Fan Controllers TC650/651 The TC642EV is a complete evaluation kit for This 1.0" x 1.0" Fan Controller Demo Board allows the evaluating and prototyping brushless DC fan control user to quickly prototype fan control circuits based on circuits using Microchip’s TC642, TC646, TC647, Microchip’s TC650 or TC651 PWM Fan Control ICs. TC648 and TC649 BDC fan controllers. The fan speed The board can interface with virtually any brushless DC control signal can be provided by an external sensor or fan. A red LED status indicator gives visual indication voltage signal, or from the on-board potentiometer. of a fan Fault condition (open stator or blocked rotor) Minimum speed setting and auto-shutdown threshold and a green LED status indicator gives a visual are conveniently set by a potentiometer. Jumper blocks indication of an overtemperature alert (temperature is allow the user to quickly configure the output stage and 10°C higher than the high temperature limit). input signal source and scaling. Test points provide TC652DEMO – Fan Controller Demo Board for easy access for instrument readings at critical nodes. A TC652/653 user prototyping area is provided for dedicated circuitry or other user specific circuits. This 1.0" x 1.2" Fan Controller Demo Board allows the user to quickly prototype fan control circuits based on TC642DEMO – Fan Controller Demo Board for Microchip’s TC652 or TC653 PWM fan control ICs. The TC642/646/647/648/649 board can interface with virtually any brushless DC fan. This Fan Controller Demo Board allows the user to A red LED status indicator gives visual indication of a fan Fault condition (open stator or blocked rotor) and a quickly prototype fan control circuits based on green LED status indicator gives a visual indication of Microchip’s PWM fan control ICs (TC642, TC646, an overtemperature alert (temperature is 10°C higher TC647, TC648 or TC649). This 1.5" by 2.0" board’s than the high temperature limit). versatile sensor input and output driver circuitry allows the Fan Controller Demo Board to be used with TC74DEMO – Serial Digital Temperature virtually any brushless DC fan and standard thermistor. Sensor Demo Board An optional LED status indicator gives a visual indication of a fan Fault condition (open stator, blocked The TC74DEMO Board allows the user to evaluate the rotor or overtemperature Fault detection). It uses functionality of the tiny TC74 thermal sensor and through-hole components for easy user modification. perform comparative evaluation against other thermal management solutions. This 0.75" by 2.5" PC board is an ideal solution for identifying the temperature profile of applications like datacom, telecom and PC equipment. The easy-to-use software provides a visual representation of temperature profile and can interface with any PC. Ordering Information: TC642EV TC642EV Evaluation Kit for Brushless DC Fan Controllers DS51252 “TC642EV Evaluation Kit for Brushless DC Fan Controllers TC64X Product Overview” TC642DEMO TC642DEMO Fan Controller Demo Board for TC642/646/647/648/649 DS51251 “TC642DEMO Fan Control Module for TC64X Family Product Overview” TC650DEMO TC650DEMO Fan Controller Demo Board for TC650/651 TC652DEMO TC652DEMO Fan Controller Demo Board for TC652/653 DS51254 “TC650DEMO and TC652DEMO Fan Controller Demo Boards for TC650/1/2/3 Product Overview” TC74DEMO TC74DEMO Serial Digital Temperature Sensor Demo Board DS51253 “TC74DEMO Serial Thermal Sensor Demo Board for TC74 Product Overview” DS30177T-page 84 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits MCP2510 CAN Developer’s Kit The MCP2510 CAN Developer’s Kit is a multi-function tool that speeds implementation of the MCP2510 MCP2510 CAN Developer’s Kit Contents stand-alone CAN controller by offering functions for (cid:129) MCP2510 Target Board controlling its feature set. (cid:129) User Interface Software In addition, this tool can be used to demonstrate basic (runs under Windows® 95/98) CAN input/output functionality and monitor bus activity (cid:129) PC Parallel Port Interface Cable on the user’s CAN bus. It is ideal for new CAN users (cid:129) Power Supply that want to understand how CAN may be used for (cid:129) Documentation, including “MCP2510 network communication. Development Kit User’s Guide” Ordering Information: DV251001 MCP2510 CAN Developer’s Kit © 2005 Microchip Technology Inc. DS30177T-page 85

Development Systems Ordering Guide MCP250XX CAN I/O Expander Developer’s Kit The MCP250XX CAN I/O Expander Developer’s Kit Features includes everything needed to create a CAN-based (cid:129) Speeds understanding of CAN I/O expander family system using Microchip’s CAN I/O expander family. It can be used to evaluate, demonstrate and develop (cid:129) Provides ability to prototype user-defined CAN node CAN nodes using these CAN I/O expanders. The (cid:129) Enables programming of device default Demonstration mode has an MCP25050 that is configuration directly from developer’s kit configured prior to shipping and is programmed to (cid:129) Allows connection of external CAN networks manipulate analog inputs via potentiometers, PWM (cid:129) Software watch window can be used as a basic CAN outputs via a piezoelectric buzzer and an incandescent bus monitor lamp, and digital inputs via push button switches. CAN messages can be sent and received between the master node and the demonstration node via the MCP250XX CAN I/O Expander PC-user interface or via the input/output functionality Developer’s Kit Contents discussed above. Users can also set up a watch (cid:129) Target Board with Three CAN Nodes Connected window to display the message traffic as they via a CAN Bus manipulate the inputs and outputs. In this manner, the (cid:129) MCP250XX Product Samples users can see a working network being demonstrated with one of the nodes being an MCP25050 CAN I/O (cid:129) PC Software to Interface to the Target Board expander device. (cid:129) PC Parallel Port Interface Cable Another function of the developer’s kit is that the PC, (cid:129) Power Supply with included software, can be used to emulate an (cid:129) Complete Documentation MCP250XX device. This mode is used to manipulate the registers of the MCP250XX devices in order to evaluate all of the different functionality and configurations of the device family. After users are comfortable with a configuration, they can then prototype their own CAN node. An unconfigured MCP250XX device is supplied with prototyping area, also included on the target board. A header is provided to enable oscilloscope access to the I/O pins for development and troubleshooting. Once prototyping is complete, the kit can be used to program up the device configuration in much the same manner that Microchip PICmicro® MCUs are programmed. Ordering Information: DV250501 MCP250XX CAN I/O Expander Developer’s Kit DS51260 “MCP25020/25025/25050/25055 CAN I/O Expanders Developer’s Kit Product Overview” (Available at www.microchip.com) DS30177T-page 86 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits MCP2120/2150 Infrared Developer’s Kit The MCP2120/2150 Infrared Developer’s Kit includes MCP2120/2150 Infrared Developer’s Kit Contents everything needed to create a system that communicates using infrared wireless communication. (cid:129) Two MCP2120 IR Nodes It educates the designer on the IR communications (cid:129) One MCP2150 IR Node technology and IrDA® protocol and can then be used to (cid:129) Product Samples integrate these technologies into the designer’s product allowing proof of concept. (cid:129) Serial Cables (cid:129) Universal Power Supply The kit includes Microchip’s revolutionary MCP2150 Infrared Communications Controller supporting the (cid:129) Documentation IrDA Standard. It can be set up to communicate with other IrDA devices, like PDAs and mobile phones, as well. Host interface can be selected as a UART (DB-9) to a PC using Hyperlink, or as a Master controller/ASIC to the header. The boards also offer two types of transceivers: the component version (which is a lower cost but complicated) or the integrated version (which is simple but higher cost). The kit demonstrates two PCs communicating with each other via IR. Ordering Information: DM163008 MCP2120/2150 Infrared Developer’s Kit DS51257 “MCP2120/2150 Infrared Products Developer’s Kit Product Overview” (Available at www.microchip.com) © 2005 Microchip Technology Inc. DS30177T-page 87

Development Systems Ordering Guide SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit The SEEVAL 32 Evaluation System provides advanced Microchip’s features to aid in system integration and debug. SEEVAL 32 Through the use of test pins on the system, an Serial EEPROM oscilloscope or other test equipment can be easily Evaluation System connected to evaluate timing and voltage levels. Designer’s Kit Through the SEEVAL 32 Evaluation System host supports all software, serial EEPROMs can be tested by reading Microchip serial and writing data in the EEPROM under test and by EEPROMs, evaluating checksum data. Erase/write endurance can including future also be measured by selecting a Continuous Loop devices. Through mode to repeatedly read/write/erase the EEPROM. the use of a ZIF The SEEVAL 32 Serial EEPROM Evaluation System socket, standard DIP packages are directly supported. Designer’s Kit also includes the Total Endurance™ The 8-lead SOIC, TSSOP, MSOP, DFN and 5-lead Software Model, a powerful tool which can predict the SOT-23 packages can also be supported by using erase/write endurance of any given serial EEPROM separate third party adapters. The SEEVAL32 based upon its application parameters: temperature, Evaluation System gives the designer or system voltage, cycles per day and bytes per cycle. integrator the ability to read, write, or erase any byte, page, or the entire array, and to display, save, or load this data as a file. The SEEVAL 32 Evaluation System SEEVAL® 32 Serial EEPROM Evaluation System and its host software and firmware capabilities provide Designer’s Kit Contents support for all the current Windows operating systems, (cid:129) Total Endurance Software Model including: Windows XP, Windows ME, Windows 2000, Windows NT® 4.0 and also Windows 95/98. (cid:129) SEEVAL 32 Evaluation System (cid:129) Serial EEPROM Sample Pack (cid:129) SEEVAL 32 Evaluation System Software (cid:129) RS-232 Interface Cable (cid:129) Power Supply Ordering Information: DV243002 SEEVAL® 32 Serial EEPROM Evaluation System Designer’s Kit DS30177T-page 88 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360 The 13.56 MHz microID Developer’s Kit is an easy-to- use tool for design engineers at all skill levels. This kit microID® MCRF355 and MCRF360 includes all the hardware, software, reference designs Developer’s Kit Contents and samples required to get started in 13.56 MHz RFID (cid:129) 13.56 MHz Anticollision Reader designs. (cid:129) Contact Programmer This kit is intended to demonstrate basic operation of (cid:129) Two Power Supplies the high-performance MCRF355 tagging chip and basic (cid:129) Two RS-232 Cables design of a simple RFID reader. (cid:129) rfLAB™ 13.56 Software Interface (runs under Windows® 95/98, Windows 2000, Windows XP) (cid:129) Socketed Tags (cid:129) Flexible, Preprogrammed Performa™ tags by Checkpoint Systems Inc. (cid:129) Samples in DIP Form (cid:129) Documentation, including a complete “microID RFID Products 13.56 MHz RFID System Design Guide” (Application Notes, Reference Designs and Tutorials) Ordering Information: DV103003 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355 and MCRF360 PG103003 microID® Contact Programmer Kit for MCRF355 and MCRF360 (This programmer is also included in the DV103006) © 2005 Microchip Technology Inc. DS30177T-page 89

Development Systems Ordering Guide 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360 and MCRF45X The 13.56 MHz microID Developer’s Kit is a high- i speed, long range, easy-to-use tool for design microID® MCRF355, MCRF360 and MCRF45X engineers at all skill levels. This kit includes all the Developer’s Kit Contents hardware, software, reference designs and samples (cid:129) 13.56 MHz Read/Write Interrogator required to get started in high-performance 13.56 MHz (cid:129) Contact Programmer for MCRF355/360 RFID designs. (cid:129) Two Power Supplies This kit is designed to demonstrate all 13.56 MHz RFID (cid:129) Two RS-232 Cables devices, including MCRF355/360 and MCRF450/451/ (cid:129) rfLAB™ 13.56 Software Interface (runs under 452/455 and to provide a basic platform for Windows® 95/98, Windows 2000, Windows XP) high-performance RFID reader design. (cid:129) Socketed Tags (cid:129) Flexible, Preprogrammed Performa™ tags by Checkpoint Systems Inc. (cid:129) Samples in DIP Form (cid:129) Documentation including a complete “microID RFID Products 13.56 MHz RFID System Design Guide” (Application Notes, Reference Designs and Tutorials) Ordering Information: DV103006 13.56 MHz Anticollision microID® Developer’s Kit for MCRF355, MCRF360, MCRF45X PG103003 microID® Contact Programmer Kit for MCRF355 and MCRF360 (This programmer is also included in the DV103006) DS30177T-page 90 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits Interface Products Linear Products MCP2510/2515 CAN Developer’s Kit MCP6SX2 PGA Photodiode PICtail™ Ordering Information: V251001 Daughter Board Ordering Information: MCP6SX2DM-PCTLPD Speeds up software development and introduces CAN to those Opens possibilities to process other unfamiliar with the protocol. sensor signals. Increases the number Combines a software of PIC® microcontroller I/O pins development tool with a CAN available for other purposes. Features message/communication tool. a PNZ334 photodiode, MCP6001U op amp and MCP6S22 and MCP6S92 Programmable Gain Amplifiers (PGA). MCP2140 IrDA® Wireless Temp Demo Board MCP6S22 PGA PICtail™ Daughter Board Ordering Information: MCP2140DM-TMPSNS Ordering Information: MCP6S22DM-PCTL Demonstrates the MCP2140 device Helps evaluate and demonstrate Microchip’s MCP6S21/2/6/8 in a real-world application. Shows PGA family. Interfaces with Microchip’s PICkit™ 1 Flash how to integrate an IrDA® standard Starter Kit. Demonstrates firmware integration between PIC port. microcontrollers and PGA devices, to modify and develop firmware for your specific requirements. Board can be used in Stand-Alone mode. MCP6SX2 PGA Thermistor PICtail™ MCP250XX CAN I/O Expander Daughter Board Developer’s Kit Ordering Information: MCP6SX2DM-PCTLTH Ordering Information: DV250501 Features MCP6S22 and Supports CAN V2.0B active with bus rates up to 1 Mb/s. MCP6S92 PGAs. Helps Includes a CAN node using the MCP250XX CAN I/O overcome nonlinear response Expander. of the on-board NTC thermistor. Opens possibilities of MCP215X Data Logger Demo Board temperature correcting another sensor and increasing the Ordering Information: MCP215XDM number of PIC microcontroller I/O pins available for other Demonstrates the MCP2150 (or MCP2155) IrDA Standard purposes. Protocol Stack Controller device in a real-world application. Shows how to integrate an IrDA standard port into an MCP6S2X PGA Evaluation Board embedded system. Ordering Information: MCP6S2XEV MCP2120/2150 Developer’s Kit Provides a versatile selection of input channels and gains to evaluate Ordering Information: DM163008 device performance. Board supports Includes everything needed to multiple input signal sources. Two create a system that uses infrared devices can be cascaded to produce to communicate. Kit contains two gain to 1024 V/V. MCP2120 developer’s boards and one MCP2150 developer’s board. © 2005 Microchip Technology Inc. DS30177T-page 91

Development Systems Ordering Guide Linear Products (Cont.) Mixed-Signal Products MCP3221 12-Bit A/D PICtail™ TC340X Delta-Sigma A/D Converter Daughter Board Evaluation Kit Ordering Information: MCP3221DM-PCTL Ordering Information: TC3400EV The MCP3221 PICtail Daughter Board is designed to Supports all members of Microchip’s TC340X Sigma-Delta demonstrate Microchip’s MCP3221 device. The daughter A/D Converter family. Communicates with any TC340X parts board uses DataView™ Windows® software for a graphical via a parallel printer port or from an external power supply. real-time data analysis from the board through USB. This daughter board can also be used for firmware development Mixed-Signal PICtail™ Daughter Board to the MCP3221 device using the PICkit 1 Flash Starter Kit. Ordering Information: MXSIGDM Quickly and accurately evaluates performance of Microchip MCP402X Digital Potentiometer DACs, A/D Converters, LDOs, VREFs and Operational Evaluation Board Kit Amplifiers. Interfaces to the PICkit 1 Flash Starter Kit. Can use Ordering Information: MCP402XEV with a PIC16F767 for stand-alone operation. Supports many Microchip mixed-signal devices (surface mount footprint). Exercises all of the features of the MCP402X Nonvolatile Digital Potentiometer. Kit includes 2 PCBs, one populated MXDEV® Analog Evaluation System and one unpopulated. The PCB supports the 8-pin SOIC, SOT-23-6 and SOT-23-5 MCP402X package variations and Ordering Information: DVMCPA the standard ICSP™ programming header used by the Versatile, easy-to-use Microchip BFMP low-cost programming tool. system helps evaluate mixed-signal products. Includes the DVMCPA MCP Driver Board, which provides data acquisition and analysis/display in a Windows® environment. MCP42XXX Digital Pot MXDEV® Evaluation System Daughter Board Ordering Information: DV42XXX Includes an evaluation board, prototype board, RS-232 cable, 9V DC power supply, MXLAB® IDE software, digital potentiometers and a PIC microcontroller. Used with the MXDEV® 1 Analog Evaluation System Driver Board (available separately). MCP3201/02 Single/Dual A/D Converter MXDEV® Evaluation System Daughter Board Ordering Information: DV3201A Supports MCP3001, MCP3002, MCP3201 and MCP3202 stand-alone A/D Converters. Used with the MXDEV 1 MCP3XXX Single/Dual ADC Evaluation System Driver Board (available separately). MCP3204/08 MXDEV® Evaluation System Daughter Board Ordering Information: DV32XXX Supports MCP3004, MCP3008, MCP3204 and MCP3208 stand-alone A/D Converters. Used with the MXDEV 1 MCP3XXX Single/Dual ADC Evaluation System Driver Board (available separately). DS30177T-page 92 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits Power Management Power Management Products Products (Cont.) MCP1650 Boost Controller Evaluation Board MCP7384X Li Ion Battery Charger Ordering Information: MCP1650EV Evaluation Board Ordering Information: MCP7384XEV Demonstrates the MCP165X Boost Controller product family in two Three circuits use MCP73841, MCP73842 and MCP73843 high-power, boost converter devices to demonstrate simple, stand-alone, linear charging applications. of single or dual cell Lithium Ion/Lithium Polymer battery packs (battery packs are not included). MCP165X 3W White LED Demo Board SOT-23-3 Voltage Supervisor Ordering Information: MCP1650DM-LED1 Evaluation Board Demonstrates the MCP165X Boost Controller product family in a battery- Ordering Information: VSUPEV powered white LED application with Quickly evaluates operation of Voltage Supervisors and an input voltage range of 2.0V to Voltage Detectors in the Microchip SOT-23-3 package. 4.5V. Generic board evaluates SOT-23-3 devices (such as LDOs and Voltage References). Four blank PCBs are included for testing multiple devices. MCP1726 LDO Evaluation Board Ordering Information: MCP1726EV MCP1630 NiMH Battery Charger Features Microchip’s 1A, Low Quiescent Current LDO Demo Board Regulator in two circuits. The first circuit has the adjustable Ordering Information: MCP1630DM-NMC1 version of the MCP1726 in the 8-pin 3x3 DFN package. The High-speed PWM interfaces to second circuit has the adjustable version of the MCP1726 in PIC16LF818, providing a complete the 8-pin SOIC package. Both circuits have potentiometers NiMH battery charger with fuel gauge that can be used to adjust the output voltage of the LDO. capability. Minimizes external Fixed voltage versions of the device can also be evaluated inductor/capacitor cost. Performs with this board. complex NiMH battery charger timing functions. Protects battery circuit if a MCP1252 Charge Pump Backlight Fault occurs. Demo Board Ordering Information: MCP1252DM-BKLT MCP1601 Buck Regulator Evaluation Board The MCP1252 Charge Pump Backlight LED Demo Board Ordering Information: MVCP1601EV demonstrates the use of a charge pump device in an LED For both battery-powered and application. The board also serves as a platform to evaluate distributed-power applications. the MCP1252 device in general. Operates over a 2.7V to 5.5V input range while delivering 500mA of SOIC 8-Lead Evaluation Board output current. Ordering Information: SOIC8EV A blank PCB to easily evaluate Microchip Technology’s 8-pin MCP7382X Li Ion Battery Charger devices. Each device pin is connected to a pull-up resistor, a pull-down resistor, an in-line resistor and a loading capacitor. Evaluation Board The PCB pads allow through hole or surface mount Ordering Information: MCP382XEV connectors to be installed to ease connection to the board. Features three circuits utilizing the MCP73826, MCP73827 Additional passive component footprints are on the board to and MCP73828 devices to demonstrate simple, stand-alone, allow simple circuits to be implemented. linear charging of single cell Lithium Ion/Lithium Polymer battery packs (battery packs are not included). © 2005 Microchip Technology Inc. DS30177T-page 93

Development Systems Ordering Guide Thermal Management Thermal Management Products Products (Cont.) TC64X/64XB Fan Speed Controller TC72 Digital Temperature Sensor PICtail™ Evaluation Board Daughter Board Ordering Information: TC642EV Ordering Information: TC72DM-PICTL This is a complete evaluation board Connects directly to the PICkit 1 Flash for evaluation and prototyping Starter Kit. Highly accurate board brushless DC fan control circuits features a 10-bit digital sensor with 3-wire using the TC642, TC646, TC647, SPI™ interface. TC648 and TC649 BDC fan controllers. TC64/64XB Fan Speed Controller Demo Board TC74 Serial Digital Thermal Sensor Ordering Information: TC642DEMO Demo Board Fan control module allows users to quickly prototype fan Ordering Information: TC74DEMO control circuits based on the TC642 or TC646 PWM fan Particularly suited for low-cost, small form control ICs. It uses through hole components for easy user factor applications. Connects directly to the assembly and evaluation. PICkit 1 Flash Starter Kit. TC650 Fan Speed Controller Demo Board Ordering Information: TC650DEMO Allows users to quickly prototype fan control circuits based on the TC650 or TC651 PWM fan control ICs. TC77 Thermal Sensor PICtail™ Daughter Board Ordering Information: TC77-DM-PICTL System designers can use this design as an example of how to integrate a digital TC652 Fan Speed Controller Demo Board temperature sensor into their systems. Ordering Information: TC652DEMO Connects directly to the PICkit 1 Flash Starter Kit. Allows users to quickly prototype fan control circuits on TC652 or TC653 PWM fan control ICs. The board can interface with virtually any brushless DC fan. MCP9700 Thermal Sensor PICtail™ Daughter Board Ordering Information: MCP9700DM-PCTL TC1047A Temperature-to-Voltage The MCP9700 Thermal Sensor PICtail™ Daughter Board Converter PICtail™ Daughter Board demonstrates how to interface the MCP9700 to a Ordering Information: 1047ADM-PCTL microcontroller. This can be used by the system designer as an example of how to integrate an analog temperature Demonstrates how to interface the sensor into systems. TC1047A device to a microcontroller. Connects directly to the PICkit 1 Flash Starter Kit, providing a platform for code development and evaluation. Provides a good example of how to integrate an analog temperature sensor into a system. DS30177T-page 94 © 2005 Microchip Technology Inc.

Analog and Mixed-Signal Demo Boards and Kits Analog Software Tools FilterLab® Active Filter Design Software The FilterLab® Active Filter Design Software tool simplifies active filter design. Available at no cost, the FilterLab Active Filter Design Software tool provides full schematic diagrams of the filter circuit with component values and displays the frequency response. SPICE Software Models Modeling is the heart of any SPICE simulation system and Microchip provides a variety of model libraries. This library and service is another example of how Microchip leads the way in analog simulation and modeling. For more information, visit the Microchip web site at: www.microchip.com/analogtools © 2005 Microchip Technology Inc. DS30177T-page 95

Development Systems Ordering Guide NOTES: DS30177T-page 96 © 2005 Microchip Technology Inc.

K L ® SECURITY ICs EE OQ EVALUATION KIT This section contains the following major topics: KEELOQ® Security ICs Evaluation Kit II.....................................................................................98 © 2005 Microchip Technology Inc. DS30177T-page 97

Development Systems Ordering Guide KEELOQ® Security ICs Evaluation Kit II The KEELOQ Security ICs Evaluation Kit II provides the opportunity to evaluate KEELOQ Security ICs code KEELOQ® Security ICs Evaluation Kit II Contents hopping technology quickly and easily without having to make a large capital investment. The evaluation kit (cid:129) Programmer and Decoder Demonstration Board contains all the hardware and software necessary to (cid:129) Two KEELOQ Security ICs Transmitter Demo implement a fully functional remote control system and Boards demonstrate all operating modes of the following (cid:129) Sample Kit Containing Various KEELOQ Security devices: HCS101, HCS200, HCS201, HCS300, ICs Encoder and Decoder Samples HCS301, HCS320, HCS360, HCS361, HCS362, (cid:129) KEELOQ Security ICs Data Product CD HCS365 and HCS370 encoders. The kit can also be used to program and demonstrate the encoder functionality of the HCS410, HCS412 and HCS473 transponders (transcoders). Ordering Information: DM303006 KEELOQ® Security ICs Evaluation Kit II DS30177T-page 98 © 2005 Microchip Technology Inc.

BATTERY MANAGEMENT This section contains the following major topics: PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell Lithium Ion/ Polymer Chemistries...............................................................................................................100 PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell Lithium Ion/ Polymer Chemistries...............................................................................................................101 © 2005 Microchip Technology Inc. DS30177T-page 99

Development Systems Ordering Guide PowerSmart® Battery Management Evaluation Kits for 2, 3 and 4 Series Cell Lithium Ion/Polymer Chemistries The PowerSmart Battery Management Evaluation Kits for Lithium Ion/Polymer chemistries provide the PowerSmart® Battery Management opportunity to evaluate a Microchip battery Evaluation Kits for Lithium Ion/Polymer management solution for Lithium-based battery packs. Chemistries Contents The evaluation kits contain all of the hardware and (cid:129) Battery Manager Module for Lithium Ion/ software necessary to implement a functional Polymer Battery Packs SmartBattery pack with a primary and secondary safety (cid:129) PowerInfo™ 2 Configuration Interface circuit and a LED State-of-Charge display. The kit can be used to configure and demonstrate functionality of (cid:129) USB Cable the PS501 Battery Manager IC. (cid:129) RS-232 Cable (cid:129) Power Supply (cid:129) Battery Management PC Software CD Ordering Information: PS5162EV PowerSmart® Battery Management Evaluation Kit for Lithium Ion/Polymer Chemistries (2-cell) PS5163EV PowerSmart® Battery Management Evaluation Kit for Lithium Ion/Polymer Chemistries (3-cell) PS5164EV PowerSmart® Battery Management Evaluation Kit for Lithium Ion/Polymer Chemistries (4-cell) DS30177T-page 100 © 2005 Microchip Technology Inc.

Battery Management PowerSmart® Battery Management Monitor Evaluation Kit for 1 and 2 Series Cell Lithium Ion/Polymer Chemistries The PowerSmart Battery Management Evaluation Kit for Lithium Ion/Polymer chemistries provides the PowerSmart® Battery Management opportunity to evaluate a Microchip battery monitor Evaluation Kit for 1 and 2 Series Cell solution for one or two series cell Lithium-based battery Lithium Ion/Polymer Chemistries Contents packs. The evaluation kit contains all of the hardware (cid:129) Battery Monitor Evaluation Board (PS7070) for and software necessary to incorporate a functional fuel 1 and 2 Series Cell Lithium Ion/Polymer Battery gauge and safety module into a battery pack. The kit Packs can be used to configure and demonstrate functionality (cid:129) PowerInfo™ 2 Configuration Interface (PS051) of the PS700 Battery Monitor IC. (cid:129) USB Cable (cid:129) Battery Management PC Software CD Ordering Information: PS7070EV PowerSmart® Battery Management Evaluation Kit for 1 and 2 Series Cell Lithium Ion/Polymer Chemistries © 2005 Microchip Technology Inc. DS30177T-page 101

Development Systems Ordering Guide NOTES: DS30177T-page 102 © 2005 Microchip Technology Inc.

CROSS REFERENCE This section contains the following major topics: Development Systems Cross Reference Table.......................................................................104 © 2005 Microchip Technology Inc. DS30177T-page 103

Development Systems Ordering Guide A ogrammers Demonstration Boards or Evaluation Kits DM163008 DM163008 DV250501 DV251001 DV251001 DV164101 or DV164120* +AC163020 DV164101, DV164120* DV164101 or DV164120* +AC163020 DV164101, DV164120* DV164101 or DV164120* +AC163020 DV164101, DV164120* DV164101 or DV164120* +AC163020 DV164101 DV164120* DV164101 or DV164120*+AC163020 DV164101, DV164120* DV164101 or DV164120*+AC163020 DV164101, DV164120* M163001, DVMCP r D P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) AC162059*+XLT06SOT AC162059* AC162059*+XLT06SOT AC162059* AC162059*+XLT06SOT AC162059* AC162059*+XLT06SOT AC162059* AC162059*+XLT06SOT AC162059* AC162059*+XLT06SOT AC162059* Circuit De ®PICSTART Plus (5) AC163020 ✓ AC163020 ✓ AC163020 ✓ AC163020 ✓ ✓ n- PLAB® I ®LAB PM3Socketodule (8) C164301* C164302* C164321 C164301 C164321 C164301 C164321 C164301 C164321 C164301 C164321* C164301* C164321* C164301* C164301 C164312 M P M A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164037 AC164037 AC164037 AC164037 AC164037 AC164037 AC164037 AC164037 AC164037 AC164037* AC164037* AC164037* AC124001 AC124001 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT08SO E 4000 Emul ® ICE 2000 Syst Device Adapters DVA12XP080 DVA12XP080 g this table. MPLAB® ICE 2000 and MPLAB® ICand Demonstration Boards MPLAB Lead Count/Processor Part NumberPkg TypeModule Analog Interface Development Tools MCP212014P MCP215018P MCP250XX14P MCP250XX14SO MCP251018P MCP251518P ®PICmicro Microcontroller Development Tools PIC10F2006OT PIC10F2008P PIC10F2026OT PIC10F2028P PIC10F2046OT PIC10F2048P PIC10F2066OT PIC10F2068P PIC10F2206OT PIC10F2208P PIC10F2226OT PIC10F2228P PIC12C5088P, 8JWPCM16XA0 PIC12C5088SMPCM16XA0 NOTE:See complete list of notes followin DS30177T-page 104 © 2005 Microchip Technology Inc.

Cross Reference A A A ogrammers Demonstration Boards or Evaluation Kits M163001, DVMCP M163001, DVMCP M163001, DVMCP DM163014, DV164101, DV164120* r D D D P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) AC162059* AC162059*+XLT08SO Circuit De ®PICSTART Plus (5) ✓ AC164032 ✓ ✓ AC164032 ✓ AC164032 ✓ AC164032 ✓ ✓ ✓ ✓ ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164312 AC164302 AC164301+AC164032 AC164301 AC164312 AC164301 AC164312 AC164302 AC164301+AC164032 AC164301 AC164312 AC164301+AC164032 AC164301 AC164312 AC164301+AC164032 AC164301 AC164312 AC164302 AC164301 AC164312 AC164302 AC164301 AC164301 AC164301 AC164302 AC164306 ket Module ®PRO MATE II Socket Module (3,4) AC124001 AC124001 AC164026 AC124001+AC164032 AC124001 AC124001 AC124001 AC124001 AC164026 AC124001+AC164032 AC124001 AC124001 AC124001+AC164032 AC124001 AC124001 AC124001+AC164032 AC124001 AC124001 AC164026 AC124001 AC124001 AC164026 AC124001 AC124001 AC124001 AC164026 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT08SO XLT08SO XLT08DFN orXLT08DFN2 XLT08SO XLT08SO XLT08SO XLT08DFN orXLT08DFN2 XLT08SO XLT08DFN orXLT08DFN2 XLT08SO XLT08DFN orXLT08DFN2 XLT08SO XLT08SO XLT08SO XLT08SO XLT08SO E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 8P, 8JWPCM16XA0DVA12XP080 8SMPCM16XA0DVA12XP080 8SNPCM16XA0DVA12XP080 8MFPCM16XA0DVA12XP080 8P, 8JWPCM16XA0DVA12XP080 8SMPCM16XA0DVA12XP080 8P, 8JWPCM16XA0DVA12XP080 8SMPCM16XA0DVA12XP080 8SNPCM16XA0DVA12XP080 8MFPCM16XA0DVA12XP080 8P, 8JWPCM12XA0DVA12XP081 8SMPCM12XA0DVA12XP081 8MFPCM12XA0DVA12XP081 8P, 8JWPCM12XA0DVA12XP081 8SMPCM12XA0DVA12XP081 8MFPCM12XA0DVA12XP081 8P, 8JWPCM16XA0DVA12XP080 8SMPCM16XA0DVA12XP080 8SNPCM16XA0DVA12XP080 8P, 8JWPCM16XA0DVA12XP080 8SMPCM16XA0DVA12XP080 8SNPCM16XA0DVA12XP080 8P, 8JWPCM12XA0DVA12XP081 8P, 8JWPCM12XA0DVA12XP081 8PPCM16XA0DVA12XP080 8SNPCM16XA0DVA12XP080 8STPCM16XA0DVA12XP080 8MSPCM16XA0DVA12XP080 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC12C508A PIC12C508A PIC12C508A PIC12C508A PIC12C509 PIC12C509 PIC12C509A PIC12C509A PIC12C509A PIC12C509A PIC12C671 PIC12C671 PIC12C671 PIC12C672 PIC12C672 PIC12C672 PIC12CE518 PIC12CE518 PIC12CE518 PIC12CE519 PIC12CE519 PIC12CE519 PIC12CE673 PIC12CE674 PIC12F508 PIC12F508 PIC12F508 PIC12F508 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 105

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163014, DV164101, DV164120* DV164101, DV164120* DM163014, DV164101, DV164120* DM163014, DV164101, DV164120* DM163014, DV164101, DV164120* r P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) AC162059* AC162059*+XLT08SO AC162070* AC162050 AC162050+XLT08SO AC162050+XLT08DFN orXLT08DFN2 AC162057 AC162057+XLT08SO AC162050+XLT08DFN orXLT08DFN2 AC162050 AC162050+XLT08SO AC162050+XLT08DFN orXLT08DFN2 Circuit De ®PICSTART Plus (5) ✓ ✓ AC164032 ✓ AC164032 ✓ AC164032 n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164306 AC164301* AC164302* AC164301*+AC164032 AC164301 AC164302 AC164301+AC164032 AC164301 AC164302 AC164301+AC164032 AC164301 AC164302 AC164301+AC164032 ket Module ®PRO MATE II Socket Module (3,4) AC124001 AC164026 AC124001* AC164026* AC124001 AC164026 AC124001+AC164032 AC124001 AC164026 AC124001+AC164032 AC124001 AC164026 AC124001+AC164032 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT08SO XLT08SO XLT08DFN orXLT08DFN2 ACICE0201 XLT08SO XLT08DFN orXLT08DFN2 XLT08SO XLT08DFN orXLT08DFN2 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC12F5098PPCM16XA0DVA12XP080 PIC12F5098SNPCM16XA0DVA12XP080 PIC12F5098STPCM16XA0DVA12XP080 PIC12F5098MSPCM16XA0DVA12XP080 PIC12F5108P PIC12F5108SN PIC12F5108MS PIC12F5108MF PIC12F6298PPCM12XB0DVA12XP081 PIC12F6298SNPCM12XB0DVA12XP081 PIC12F6298MFPCM12XB0DVA12XP081 PIC12F6358PPCM16YM0DVA1002 PIC12F6358SNPCM16YM0DVA1002 PIC12F6358MFPCM16YM0DVA1002 PIC12F6758PPCM12XB0DVA12XP081 PIC12F6758SNPCM12XB0DVA12XP081 PIC12F6758MFPCM12XB0DVA12XP081 NOTE:See complete list of notes following this table. DS30177T-page 106 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163014, DV164101, DV164120* DM163001 DM163001 DM163001 DM163001 DM163001 DM163001 DM163001 DM163001 r P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) AC162058 AC162058+XLT08SO AC162058+XLT08DFN orXLT08DFN2 Circuit De ® PICSTARTPlus (5) ✓ AC164032 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164301 +AC164032 AC164301 AC164302 AC164301 AC164302 AC164307 AC164301 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 ket Module ®PRO MATE II Socket Module (3,4) AC124001 AC164026 AC124001 +AC164032 AC144001 AC144002 AC144002 AC164001 AC164002 AC164001 AC164002 AC164015 AC164001 AC164001 AC164002 AC164015 AC164001 AC164002 AC164015 AC164001 AC164001 AC164002 AC164015 AC164001 AC164002 AC164015 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket ACICE0201 XLT08SO XLT08DFN orXLT08DFN2 XLT28SO XLT28SS XLT18SO XLT18SO XLT20SS XLT28XP XLT28SO XLT28SS2 XLT18SO XLT20SS XLT28XP XLT28SO XLT28SS2 XLT18SO XLT20SS E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 8PPCM12XC0DVA1002 8SNPCM12XC0DVA1002 8MFPCM12XC0DVA1002 28SP, 28JWPCM14XA0DVA14XP280 28SOPCM14XA0DVA14XP280 28SSPCM14XA0DVA14XP280 18PPCM16XA0DVA16XP180 18SOPCM16XA0DVA16XP180 18P, 18JWPCM16XA0DVA16XP180 18SOPCM16XA0DVA16XP180 20SSPCM16XA0DVA16XP180 28P, 28JWPCM16XA0DVA16XP280 28SPPCM16XA0DVA16XP280 28SOPCM16XA0DVA16XP280 28SSPCM16XA0DVA16XP280 18P, 18JWPCM16XA0DVA16XP180 18SOPCM16XA0DVA16XP180 20SSPCM16XA0DVA16XP180 28P, 28JWPCM16XA0DVA16XP280 28SPPCM16XA0DVA16XP280 28SOPCM16XA0DVA16XP280 28SSPCM16XA0DVA16XP280 18P, 18JWPCM16XA0DVA16XP180 18SOPCM16XA0DVA16XP180 20SSPCM16XA0DVA16XP180 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC12F683 PIC12F683 PIC12F683 PIC14000 PIC14000 PIC14000 PIC16C52 PIC16C52 PIC16C54/54A/54C PIC16C54/54A/54C PIC16C54/54A/54C PIC16C55/55A PIC16C55/55A PIC16C55/55A PIC16C55/55A PIC16C56/56A PIC16C56/56A PIC16C56/56A PIC16C57/57C PIC16C57/57C PIC16C57/57C PIC16C57/57C PIC16C58A/58B PIC16C58A/58B PIC16C58A/58B NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 107

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163022 DM163022,DVMCPA DM163022 DM163022 DM163022 DM163022 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) bug MPL Circuit De ®PICSTART Plus (5) ✓ ✓ AC164031 ✓ ✓ AC164031 ✓ ✓ ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164307 AC164301 AC164301+AC164031 AC164302 AC164307 AC164301 AC164302 AC164301 AC164301+AC164031 AC164302 AC164307 AC164301 AC164309 AC164311 AC164305 AC164301 AC164309 AC164311 AC164305 AC164301 AC164309 AC164311 AC164305 ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164017 AC164021 AC164012 AC164012+AC164031 AC164017 AC164021 AC164012 AC164017 AC164012 AC164012+AC164031 AC164017 AC164021 AC164012 AC164013 AC164014 AC164020 AC164012 AC164013 AC164014 AC164020 AC164012 AC164013 AC164014 AC164020 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT28SO XLT28SS XLT28QFN4* XLT28SO XLT28SS XLT28SO XLT28QFN4* XLT28SO XLT28SS XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16C62A28P, 28JWPCM16XB1DVA16XP282 PIC16C62A28SOPCM16XB1DVA16XP282 PIC16C62A28SSPCM16XB1DVA16XP282 PIC16C62B28SP, 28JWPCM16XE1DVA16XP282 PIC16C62B28MLPCM16XE1DVA16XP282 PIC16C62B28SOPCM16XE1DVA16XP282 PIC16C62B28SSPCM16XE1DVA16XP282 PIC16C6328SP, 28JWPCM16XB1DVA16XP282 PIC16C6328SOPCM16XB1DVA16XP282 PIC16C63A28SP, 28JWPCM16XE1DVA16XP282 PIC16C63A28MLPCM16XE1DVA16XP282 PIC16C63A28SOPCM16XE1DVA16XP282 PIC16C63A28SSPCM16XE1DVA16XP282 PIC16C64A40P, 40JWPCM16XB1DVA16XP401 PIC16C64A44LPCM16XB1DVA16XL441 PIC16C64A44PQPCM16XB1DVA16PQ441 PIC16C64A44PTPCM16XB1DVA16PQ441 PIC16C65A40P, 40JWPCM16XB1DVA16XP401 PIC16C65A44LPCM16XB1DVA16XL441 PIC16C65A44PQPCM16XB1DVA16PQ441 PIC16C65A44PTPCM16XB1DVA16PQ441 PIC16C65B40P, 40JWPCM16XE1DVA16XP401 PIC16C65B44LPCM16XE1DVA16XL441 PIC16C65B44PQPCM16XE1DVA16PQ441 PIC16C65B44PTPCM16XE1DVA16PQ441 NOTE:See complete list of notes following this table. DS30177T-page 108 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163022 DM163001 DM163022 DM163022 DM163022 DM163022 DM163022 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) bug MPL Circuit De ® PICSTARTPlus (5) ✓ ✓ ✓ ✓ ✓ AC164031 ✓ ✓ AC164031 ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164301 AC164309 AC164311 AC164305 AC164301 AC164302 AC164301 AC164302 AC164307 AC164301 AC164301+AC164031 AC164302 AC164307 AC164301 AC164302 AC164301 AC164301+AC164031 AC164302 AC164307 AC164301 AC164309 AC164311 AC164305 ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164017 AC164012 AC164013 AC164014 AC164020 AC164010 AC164010 AC164012 AC164017 AC164021 AC164012 AC164012+AC164031 AC164017 AC164021 AC164012 AC164017 AC164012 AC164012+AC164031 AC164017 AC164021 AC164012 AC164013 AC164014 AC164020 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT28SO XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT18SO XLT28SO XLT28SS XLT28QFN4* XLT28SO XLT28SS XLT28SO XLT28QFN4* XLT28SO XLT28SS XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 28SP, 28JWPCM16XE1DVA16XP282 28SOPCM16XE1DVA16XP282 40P, 40JWPCM16XE1DVA16XP401 44LPCM16XE1DVA16XL441 44PQPCM16XE1DVA16PQ441 44PTPCM16XE1DVA16PQ441 18P, 18JWPCM16XF0DVA16XP180 18SOPCM16XF0DVA16XP180 28SP, 28JWPCM16XB1DVA16XP282 28SOPCM16XB1DVA16XP282 28SSPCM16XB1DVA16XP282 28SP, 28JWPCM16XE1DVA16XP282 28MLPCM16XE1DVA16XP282 28SOPCM16XE1DVA16XP282 28SSPCM16XE1DVA16XP282 28SP, 28JWPCM16XB1DVA16XP282 28SOPCM16XB1DVA16XP282 28SP, 28JWPCM16XE1DVA16XP282 28MLPCM16XE1DVA16XP282 28SOPCM16XE1DVA16XP282 28SSPCM16XE1DVA16XP282 40P, 40JWPCM16XB1DVA16XP401 44LPCM16XB1DVA16XL441 44PQPCM16XB1DVA16PQ441 44PTPCM16XB1DVA16PQ441 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC16C66 PIC16C66 PIC16C67 PIC16C67 PIC16C67 PIC16C67 PIC16C71 PIC16C71 PIC16C72 PIC16C72 PIC16C72 PIC16C72A PIC16C72A PIC16C72A PIC16C72A PIC16C73A PIC16C73A PIC16C73B PIC16C73B PIC16C73B PIC16C73B PIC16C74A PIC16C74A PIC16C74A PIC16C74A NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 109

Development Systems Ordering Guide 11 ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163022 DM163022 DM163005 M163007, DM1630 DM163005 DM163001 DM163001 DM163001 Pr D ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) bug MPL De ® Circuit PICSTARTPlus (5) ✓ ✓ ✓ ✓ ✓ ✓ ✓ n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164309 C164311 C164305 C164301 C164302 C164301 C164309 C164311 C164305 C164301 C164307 C164301 C164307 C164301 C164302 C164301 C164302 C164307 C164301 C164302 C164301 C164302 C164307 C164301 C164302 C164307 M P M A A A A A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164013 AC164014 AC164020 AC164012 AC164017 AC164012 AC164013 AC164014 AC164020 AC164029 AC164029 AC164030 AC164030 AC124001 AC164026 AC164010 AC164010 AC164018 AC164001 AC164002 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT28SO XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT20SS1 XLT18SO XLT14SO XLT18SO XLT20SS XLT18SO XLT20SS XLT18SO XLT20SS MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16C74B40P, 40JWPCM16XE1DVA16XP401 PIC16C74B44LPCM16XE1DVA16XL441 PIC16C74B44PQPCM16XE1DVA16PQ441 PIC16C74B44PTPCM16XE1DVA16PQ441 PIC16C7628SP, 28JWPCM16XE1DVA16XP282 PIC16C7628SOPCM16XE1DVA16XP282 PIC16C7740P, 40JWPCM16XE1DVA16XP401 PIC16C7744LPCM16XE1DVA16XL441 PIC16C7744PQPCM16XE1DVA16PQ441 PIC16C7744PTPCM16XE1DVA16PQ441 PIC16C43220P, 20JWPCM16YB0DVA16XP201 PIC16C43220SSPCM16YB0DVA16XP201 PIC16C43318P, 18JWPCM16YC0DVA16XP185 PIC16C43318SOPCM16YC0DVA16XP185 PIC16C50514P, 14JWPCM16XA0DVA16XP140 PIC16C50514SLPCM16XA0DVA16XP140 PIC16C55418P, 18JWPCM16XC0DVA16XP180 PIC16C55418SOPCM16XC0DVA16XP180 PIC16C55420SSPCM16XC0DVA16XP180 PIC16C55728P PIC16C55728SO PIC16C55818P, 18JWPCM16XC0DVA16XP180 PIC16C55818SOPCM16XC0DVA16XP180 PIC16C55820SSPCM16XC0DVA16XP180 PIC16C620/18P, 18JWPCM16XC0DVA16XP180620A PIC16C620/18SOPCM16XC0DVA16XP180620A PIC16C620/20SSPCM16XC0DVA16XP180620A NOTE:See complete list of notes following this table. DS30177T-page 110 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163001 DM163001 DM163022 DM163022 DM163001 DM163001 DM163001 DM163001 DM163001 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) bug MPL Circuit De ® PICSTARTPlus (5) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164302 C164307 C164301 C164302 C164307 C164301 C164302 C164301 C164309 C164311 C164305 C164301 C164302 C164307 C164301 C164302 C164307 C164301 C164302 C164307 C164301 C164302 C164307 C164301 C164302 C164307 M P M A A A A A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164012 AC164017 AC164012 AC164013 AC164014 AC164020 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT18SO XLT20SS XLT18SO XLT20SS XLT28SO XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT18SO XLT20SS XLT18SO XLT20SS XLT18SO XLT20SS XLT18SO XLT20SS XLT18SO XLT20SS E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 18P, 18JWPCM16XC0DVA16XP180 18SOPCM16XC0DVA16XP180 20SSPCM16XC0DVA16XP180 18P, 18JWPCM16XC0DVA16XP180 18SOPCM16XC0DVA16XP180 20SSPCM16XC0DVA16XP180 28SP, 28JWPCM16XD0DVA16XP282 28SOPCM16XD0DVA16XP282 40P, 40JWPCM16XD0DVA16XP401 44LPCM16XD0DVA16XL441 44PQPCM16XD0DVA16PQ441 44PTPCM16XD0DVA16PQ441 18P, 18JWPCM16XF0DVA16XP180 18SOPCM16XF0DVA16XP180 20SSPCM16XF0DVA16XP180 18P, 18JWPCM16XF0DVA16XP180 18SOPCM16XF0DVA16XP180 20SSPCM16XF0DVA16XP180 18P, 18JWPCM16XE1DVA16XP182 18SOPCM16XE1DVA16XP182 20SSPCM16XE1DVA16XP182 18P, 18JWPCM16XG0DVA16XP180 18SOPCM16XG0DVA16XP180 20SSPCM16XG0DVA16XP180 18P, 18JWPCM16XE1DVA16XP182 18SOPCM16XE1DVA16XP182 20SSPCM16XE1DVA16XP182 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC16C621/621A PIC16C621/621A PIC16C621/621A PIC16C622/622A PIC16C622/622A PIC16C622/622A PIC16C642 PIC16C642 PIC16C662 PIC16C662 PIC16C662 PIC16C662 PIC16C710 PIC16C710 PIC16C710 PIC16C711 PIC16C711 PIC16C711 PIC16C712 PIC16C712 PIC16C712 PIC16C715 PIC16C715 PIC16C715 PIC16C716 PIC16C716 PIC16C716 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 111

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163001 DM163010 DM163010 DM163001 DM163001 DM163022 DM163022 DM163012 DM163012 DM163003 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) bug MPL Circuit De ®PICSTART Plus (5) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ AC164024 n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164302 C164307 C164301 C164302 C164301 C164309 C164305 C164301 C164302 C164307 C164301 C164302 C164307 C164301 C164302 C164307 C164301 C164309 C164311 C164305 C164301 C164302 C164307 C164301 C164302 C164307 C164319 C164308 M P M A A A A A A A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164010 AC164010 AC164018 AC164012 AC164017 AC164012 AC164013 AC164020 AC164028 AC164028 AC164018 AC164028 AC164028 AC164018 AC164012 AC164017 AC164021 AC164012 AC164013 AC164014 AC164020 AC164028 AC164028 AC164018 AC164028 AC164028 AC164018 AC164025 AC164023 AC164022 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT18SO XLT20SS XLT28SO XLT44PT or XLT44PT3 XLT20SO1 XLT20SS1 XLT20SO1 XLT20SS1 XLT28SO XLT28SS XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT20SO1 XLT20SS1 XLT20SO1 XLT20SS1 XLT64PT1 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16C71718P, 18JWPCM16XN1DVA18XP180 PIC16C71718SOPCM16XN1DVA18XP180 PIC16C71720SSPCM16XN1DVA18XP180 PIC16C74528SP, 28JWPCM16XQ1DVA16XP282 PIC16C74528SOPCM16XQ1DVA16XP282 PIC16C76540P, 40JWPCM16XQ1DVA16XP401 PIC16C76544LPCM16XQ1DVA16XL441 PIC16C76544PTPCM16XQ1DVA16PQ441 PIC16C77020P, 20JWPCM16XN1DVA16XP200 PIC16C77020SOPCM16XN1DVA16XP200 PIC16C77020SSPCM16XN1DVA16XP200 PIC16C77120P, 20JWPCM16XN1DVA16XP200 PIC16C77120SOPCM16XN1DVA16XP200 PIC16C77120SSPCM16XN1DVA16XP200 PIC16C77328SP, 28JWPCM16XL0DVA16XP282 PIC16C77328SOPCM16XL0DVA16XP282 PIC16C77328SSPCM16XL0DVA16XP282 PIC16C77440P, 40JWPCM16XL0DVA16XP401 PIC16C77444LPCM16XL0DVA16XL441 PIC16C77444PQPCM16XL0DVA16PQ441 PIC16C77444PTPCM16XL0DVA16PQ441 PIC16C78120P, 20JWPCM16XW0DVA16XP202 PIC16C78120SOPCM16XW0DVA16XP202 PIC16C78120SSPCM16XW0DVA16XP202 PIC16C78220P, 20JWPCM16XW0DVA16XP202 PIC16C78220SOPCM16XW0DVA16XP202 PIC16C78220SSPCM16XW0DVA16XP202 PIC16C92364SPPCM16XJ0DVA16XP640 PIC16C92364PTPCM16XJ0DVA16PQ640 PIC16C92368L, 68CLPCM16XJ0DVA16XL680 NOTE:See complete list of notes following this table. DS30177T-page 112 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163003 DM163003 DM163003 DM163001 DM163001 DM163001 DV164101, DM163001, DV164120* DV164101, DM163001, DV164120* DV164101, DV164120* DM163022 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) ✓* ✓* bug MPL Circuit De ® PICSTARTPlus (5) AC164024 AC164024 AC164024 ✓ ✓ ✓ ✓ ✓ ✓ AC164031 n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164319 AC164308 AC164319 AC164308 AC164319 AC164308 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301 AC164301 AC164302 AC164307 AC164301 AC164305 AC164301 AC164302 AC164307 AC164301+AC164031 ket Module ®PRO MATE II Socket Module (3,4) AC164025 AC164023 AC164022 AC164023 AC164022 AC164023 AC164022 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164001 AC164002 AC164015 AC164001 AC164001 AC164002 AC164015 AC164038* AC164020* AC164012 AC164017 AC164021 AC164012+AC164031 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT64PT1 XLT64PT1 XLT64PT1 XLT18SO XLT20SS XLT18SO XLT20SS XLT18SO XLT20SS XLT18SO XLT20SS XLT28XP XLT28SO XLT28SS2 XLT28SO XLT28SS XLT28QFN4* E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 64SPPCM16XJ0DVA16XP640 64PTPCM16XJ0DVA16PQ640 68L, 68CLPCM16XJ0DVA16XL680 64PTPCM16XT0DVA16PQ640 68L, 68CLPCM16XT0DVA16XL680 64PTPCM16XT0DVA16PQ640 68L, 68CLPCM16XT0DVA16XL680 18P, 18JWPCM16XC0DVA16XP180 18SOPCM16XC0DVA16XP180 20SSPCM16XC0DVA16XP180 18P, 18JWPCM16XC0DVA16XP180 18SOPCM16XC0DVA16XP180 20SSPCM16XC0DVA16XP180 18P, 18JWPCM16XC0DVA16XP180 18SOPCM16XC0DVA16XP180 20SSPCM16XC0DVA16XP180 18PPCM16XA0DVA16XP180 18SOPCM16XA0DVA16XP180 20SSPCM16XA0DVA16XP180 28PPCM16XA0DVA16XP280 28SPPCM16XA0DVA16XP280 28SOPCM16XA0DVA16XP280 28SSPCM16XA0DVA16XP280 40P 44PT 28SP, 28JWPCM16XS2DVA16XP282 28SOPCM16XS2DVA16XP282 28SSPCM16XS2DVA16XP282 28MLPCM16XS2DVA16XP282 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC16C924 PIC16C924 PIC16C924 PIC16C925 PIC16C925 PIC16C926 PIC16C926 PIC16CE623 PIC16CE623 PIC16CE623 PIC16CE624 PIC16CE624 PIC16CE624 PIC16CE625 PIC16CE625 PIC16CE625 PIC16F54 PIC16F54 PIC16F54 PIC16F57 PIC16F57 PIC16F57 PIC16F57 PIC16F59 PIC16F59 PIC16F72 PIC16F72 PIC16F72 PIC16F72 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 113

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163022 DM163022 DM163022 DM163001 DM163001 DM163001 DM163014 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C ger, ®AB I(6) * ✓* ✓* ✓* ✓* ✓* ✓* ✓* * ✓* ✓* ✓* ✓* ✓* ✓* ✓* ✓ ✓ ✓ ✓ bug MPL ✓ ✓ Circuit De ®PICSTART Plus (5) ✓ AC164031 ✓ AC164034 ✓ AC164031 ✓ AC164034 ✓ ✓ ✓ ✓ AC164033 n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164301+AC164031 AC164302 AC164307 AC164301 AC164309 AC164305 AC164322 AC164301 AC164301+AC164031 AC164302 AC164307 AC164301 AC164309 AC164322 AC164305 AC164301 AC164302 AC164301 AC164302 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301+AC164031 ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164012+AC164031 AC164017 AC164021 AC164012 AC164013 AC164020 AC164012+AC164034 AC164012 AC164012+AC164031 AC164017 AC164021 AC164012 AC164013 AC164012+AC164034 AC164020 AC164010 AC164010 AC164010 AC164010 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010+AC164033 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT28QFN4* XLT28SO XLT28SS XLT44PT or XLT44PT3 XLT44QFN2 XLT28QFN4* XLT28SO XLT28SS XLT44QFN2 XLT44PT or XLT44PT3 XLT18SO XLT18SO XLT18SO XLT20SS XLT18SO XLT20SS XLT28QFN3 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16F7328SP, 28JWPCM16XS2DVA16XP282 PIC16F7328MLPCM16XS2DVA16XP282 PIC16F7328SOPCM16XS2DVA16XP282 PIC16F7328SSPCM16XS2DVA16XP282 PIC16F7440PPCM16XS2DVA16XP401 PIC16F7444LPCM16XS2DVA16XL441 PIC16F7444PTPCM16XS2DVA16PQ441 PIC16F7444MLPCM16XS2DVA16XL441 PIC16F7628SP, 28JWPCM16XS2DVA16XP282 PIC16F7628MLPCM16XS2DVA16XP282 PIC16F7628SOPCM16XS2DVA16XP282 PIC16F7628SSPCM16XS2DVA16XP282 PIC16F7740P, 40JWPCM16XS2DVA16XP401 PIC16F7744LPCM16XS2DVA16XL441 PIC16F7744MLPCM16XS2DVA16XL441 PIC16F7744PTPCM16XS2DVA16PQ441 PIC16F8318PPCM16XH1DVA16XP180 PIC16F8318SOPCM16XH1DVA16XP180 PIC16F8418PPCM16XH1DVA16XP180 PIC16F8418SOPCM16XH1DVA16XP180 PIC16F84A18PPCM16XH1DVA16XP180 PIC16F84A18SOPCM16XH1DVA16XP180 PIC16F84A20SSPCM16XH1DVA16XP180 PIC16F8718PPCM16YG0DVA16XP186 PIC16F8718SOPCM16YG0DVA16XP186 PIC16F8720SSPCM16YG0DVA16XP186 PIC16F8728MLPCM16YG0DVA16XP186 NOTE:See complete list of notes following this table. DS30177T-page 114 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163014 DM163014, DV164101, DV164120* DV164101*, DV164120* DM163001 DM163014 DM163001 DM163014 r P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ ✓ AC162059 AC162059 +XLT14SO AC162070* AC162053 AC162053 +XLT18SO AC162053 +XLT20SS AC162053 +XLT28QFN3 AC162053 AC162053 +XLT18SO AC162053 +XLT20SS AC162053 +XLT28QFN3 Circuit De ® PICSTARTPlus (5) ✓ AC164033 ✓ ✓ ✓ AC164033 ✓ ✓ AC164033 n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164306 AC164301* AC164302* AC164306* AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301+AC164031 ket Module ®PRO MATE II Socket Module (3,4) AC164010 AC164010 AC164018 AC164010+AC164033 AC124001 AC164026 AC124001* AC164026* AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010+AC164033 AC164010 AC164010 AC164018 AC164010 AC164010 AC164018 AC164010+AC164033 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT18SO XLT20SS XLT28QFN3 XLT14SO XLT18SO XLT20SS XLT18SO XLT20SS XLT28QFN3 XLT18SO XLT20SS XLT18SO XLT20SS XLT28QFN3 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 18PPCM16YG0DVA16XP186 18SOPCM16YG0DVA16XP186 20SSPCM16YG0DVA16XP186 28MLPCM16YG0DVA16XP186 14P, 14JWPCM16XA0DVA16XP140 14SLPCM16XA0DVA16XP140 14STPCM16XA0DVA16XP140 14P 14SO 14ST 16ML 18P, 18JWPCM16XP0DVA16XP183 18SOPCM16XP0DVA16XP183 20SSPCM16XP0DVA16XP183 18PPCM16YF0DVA16XP186 18SOPCM16YF0DVA16XP186 20SSPCM16YF0DVA16XP186 28MLPCM16YF0DVA16XP186 18P, 18JWPCM16XP0DVA16XP183 18SOPCM16XP0DVA16XP183 20SSPCM16XP0DVA16XP183 18PPCM16YF0DVA16XP186 18SOPCM16YF0DVA16XP186 20SSPCM16YF0DVA16XP186 28MLPCM16YF0DVA16XP186 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC16F88 PIC16F88 PIC16F88 PIC16F88 PIC16F505 PIC16F505 PIC16F505 PIC16F506 PIC16F506 PIC16F506 PIC16F506 PIC16F627 PIC16F627 PIC16F627 PIC16F627A PIC16F627A PIC16F627A PIC16F627A PIC16F628 PIC16F628 PIC16F628 PIC16F628A PIC16F628A PIC16F628A PIC16F628A NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 115

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163014, DV164101, DV164120* DV164120* DV164101*, DM163014 DM163014 DM163014, DV164101, DV164120* DV164101, DV164120* r P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) AC162052 AC162052 +XLT14SO AC162052 +XLT14SS AC162057 AC162057 +XLT14SO AC162057 +XLT14SS AC162066* AC162066* +XLT20SO1 AC162066* +XLT20SS1 AC162053 AC162053 +XLT18SO AC162053 +XLT20SS AC162053 +XLT28QFN3 AC162052 AC162052 +XLT14SO AC162052 +XLT14SS AC162055 AC162055 +XLT14SO AC162055 +XLT14SS Circuit De ®PICSTART Plus (5) ✓ ✓ ✓* ✓ AC164033 ✓ ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164306 AC164301 AC164302 AC164306 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164306 AC164301 AC164302 AC164306 ket Module ®PRO MATE II Socket Module (3,4) AC124001 AC164026 AC164026 AC124001 AC164026 AC164026 AC164039* AC164039* AC164010 AC164010 AC164018 AC164010+AC164033 AC124001 AC164026 AC164026 AC124001 AC164026 AC164026 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT14SO XLT14SS ACICE0207 XLT14SO XLT14SS ACICE0203 XLT20SO1 XLT20SS1 XLT18SO XLT20SS XLT28QFN3 XLT14SO XLT14SS ACICE0207 XLT14SO XLT14SS MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16F63014PPCM16YD0DVA16XP141 PIC16F63014SLPCM16YD0DVA16XP141 PIC16F63014STPCM16YD0DVA16XP141 PIC16F63614PPCM16YM0DVA1002 PIC16F63614SLPCM16YM0DVA1002 PIC16F63614STPCM16YM0DVA1002 PIC16F63920PPCM16YM0*DVA1002 PIC16F63920SOPCM16YM0*DVA1002 PIC16F63920SSPCM16YM0*DVA1002 PIC16F648A18PPCM16YF0DVA16XP186 PIC16F648A18SOPCM16YF0DVA16XP186 PIC16F648A20SSPCM16YF0DVA16XP186 PIC16F648A28MLPCM16YF0DVA16XP186 PIC16F67614PPCM16YD0DVA16XP141 PIC16F67614SLPCM16YD0DVA16XP141 PIC16F67614STPCM16YD0DVA16XP141 PIC16F68414PPCM16YK0DVA1002 PIC16F68414SLPCM16YK0DVA1002 PIC16F68414STPCM16YK0DVA1002 NOTE:See complete list of notes following this table. DS30177T-page 116 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DV164120* DV164120* DV164101, DV164120* DV164120* DV164120* DM163001 r P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) AC162061* AC162061* +XLT20SO1 AC162061* +XLT20SS1 AC162061* AC162061* +XLT20SO1 AC162061* +XLT20SS1 AC162056 AC162056 +XLT14SO AC162056 +XLT14SS AC162061* AC162061* +XLT20SO1 AC162061* +XLT20SS1 AC162061* AC162061* +XLT20SO1 AC162061* +XLT20SS1 AC162054 AC162054 +XLT18SO AC162054 +XLT20SS ✓ ✓ ✓ ✓ Circuit De ® PICSTARTPlus (5) ✓ ✓ ✓ AC164031 n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301* AC164302* AC164307* AC164301* AC164302* AC164307* AC164301 AC164302 AC164306 AC164301* AC164302* AC164307* AC164301* AC164302* AC164307* AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301+AC164031 ket Module ®PRO MATE II Socket Module (3,4) AC164039* AC164039* AC164039* AC164039* AC124001 AC164026 AC164026 AC164039* AC164039* AC164039* AC164039* AC164010 AC164010 AC164018 AC164012 AC164017 AC164021 AC164012+AC164031 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket ACICE0203 XLT20SO1 XLT20SS1 ACICE0203 XLT20SO1 XLT20SS1 ACICE0207 XLT14SO XLT14SS ACICE0203 XLT20SO1 XLT20SS1 ACICE0203 XLT20SO1 XLT20SS1 XLT18SO XLT20SS XLT28SO XLT28SS XLT28QFN4* E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 20PPCM16YQ0*DVA1004* 20SOPCM16YQ0*DVA1004* 20SSPCM16YQ0*DVA1004* 20PPCM16YQ0*DVA1004* 20SOPCM16YQ0*DVA1004* 20SSPCM16YQ0*DVA1004* 14PPCM16YL0DVA1002 14SLPCM16YL0DVA1002 14STPCM16YL0DVA1002 20PPCM16YQ0*DVA1004* 20SOPCM16YQ0*DVA1004* 20SSPCM16YQ0*DVA1004* 20PPCM16YQ0*DVA1004* 20SOPCM16YQ0*DVA1004* 20SSPCM16YQ0*DVA1004* 18PPCM16YJ0DVA16XP187 18SOPCM16YJ0DVA16XP187 20SSPCM16YJ0DVA16XP187 28SPPCM16YH0DVA18XP280 28SOPCM16YH0DVA18XP280 28SSPCM16YH0DVA18XP280 28MLPCM16YH0DVA18XP280 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC16F685 PIC16F685 PIC16F685 PIC16F687 PIC16F687 PIC16F687 PIC16F688 PIC16F688 PIC16F688 PIC16F689 PIC16F689 PIC16F689 PIC16F690 PIC16F690 PIC16F690 PIC16F716 PIC16F716 PIC16F716 PIC16F737 PIC16F737 PIC16F737 PIC16F737 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 117

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DV164120* DM163014 DM163014 DM163022 DM163022 r P ware Tools, ®MPLAB CXX Compiler bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ AC162060* AC162060* +XLT20SO1 AC162060* +XLT20SS1 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Circuit De ®PICSTART Plus (5) ✓ AC164034 ✓ AC164031 ✓ AC164034 ✓* ✓ AC164033 ✓ AC164033 ✓ ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164305 AC164322 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164305 AC164322 AC164301 AC164302 AC164307 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164307 AC164301 AC164309 AC164305 ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164020 AC164012+AC164034 AC164012 AC164017 AC164021 AC164012+AC164031 AC164012 AC164020 AC164012+AC164034 AC164039* AC164039* AC164010 AC164010 AC164018 AC164010+AC164033 AC164010 AC164010 AC164018 AC164010+AC164033 AC164012 AC164017 AC164021 AC164012 AC164013 AC164020 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44QFN2 XLT28SO XLT28SS XLT28QFN4* XLT44PT or XLT44PT3 XLT44QFN2 ACICE0203 XLT20SO1 XLT20SS1 XLT18SO XLT20SS XLT28QFN3 XLT18SO XLT20SS XLT28QFN3 XLT28SO XLT28SS XLT44PT or XLT44PT3 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16F74740PPCM16YH0DVA18XP400 PIC16F74744PTPCM16YH0DVA18PQ440 PIC16F74744MLPCM16YH0DVA18XP400 PIC16F76728PPCM16YH0DVA18XP280 PIC16F76728SOPCM16YH0DVA18XP280 PIC16F76728SSPCM16YH0DVA18XP280 PIC16F76728MLPCM16YH0DVA18XP280 PIC16F77740PPCM16YH0DVA18XP400 PIC16F77744PTPCM16YH0DVA18PQ440 PIC16F77744MLPCM16YH0DVA18XP400 PIC16F78520PPCM16YN0*DVA1004* PIC16F78520SOPCM16YN0*DVA1004* PIC16F78520SSPCM16YN0*DVA1004* PIC16F81818PPCM16YE0DVA16XP186 PIC16F81818SOPCM16YE0DVA16XP186 PIC16F81820SSPCM16YE0DVA16XP186 PIC16F81828MLPCM16YE0DVA16XP186 PIC16F81918PPCM16YE0DVA16XP186 PIC16F81918SOPCM16YE0DVA16XP186 PIC16F81920SSPCM16YE0DVA16XP186 PIC16F81928MLPCM16YE0DVA16XP186 PIC16F87028SP, 28JWPCM16XR1DVA16XP282 PIC16F87028SOPCM16XR1DVA16XP282 PIC16F87028SSPCM16XR1DVA16XP282 PIC16F87140PPCM16XR1DVA16XP401 PIC16F87144LPCM16XR1DVA16XL441 PIC16F87144PTPCM16XR1DVA16PQ441 NOTE:See complete list of notes following this table. DS30177T-page 118 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163022 DM163022 DM163022 DM163022 DM163022 DM163022 DM163022 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C bugger, ®MPLAB I(6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Circuit De ® PICSTARTPlus (5) ✓ ✓ ✓ AC164031 ✓ ✓ AC164034 ✓ ✓ AC164031 ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164302 AC164307 AC164301 AC164302 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164309 AC164311 AC164305 AC164301 AC164309 AC164305 AC164322 AC164301 AC164302 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164309 AC164311 AC164305 ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164017 AC164021 AC164012 AC164017 AC164012 AC164017 AC164021 AC164012+AC164031 AC164012 AC164013 AC164014 AC164020 AC164012 AC164013 AC164020 AC164012+AC164034 AC164012 AC164017 AC164012 AC164017 AC164021 AC164012+AC164031 AC164012 AC164013 AC164014 AC164020 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT28SO XLT28SS XLT28SO XLT28SO XLT28SS XLT28QFN4* XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44QFN2 XLT28SO XLT28SO XLT28SS XLT28QFN4* XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 28SPPCM16XK1DVA16XP282 28SOPCM16XK1DVA16XP282 28SSPCM16XK1DVA16XP282 28SPPCM16XK1DVA16XP282 28SOPCM16XK1DVA16XP282 28SPPCM16XV0DVA16XP282 28SOPCM16XV0DVA16XP282 28SSPCM16XV0DVA16XP282 28MLPCM16XV0DVA16XP282 40PPCM16XK1DVA16XP401 44LPCM16XK1DVA16XL441 44PQPCM16XK1DVA16PQ441 44PTPCM16XK1DVA16PQ441 40PPCM16XV0DVA16XP401 44LPCM16XV0DVA16XL441 44PTPCM16XV0DVA16PQ441 44MLPCM16XV0DVA16XP401 28SPPCM16XK1DVA16XP282 28SOPCM16XK1DVA16XP282 28SPPCM16XV0DVA16XP282 28SOPCM16XV0DVA16XP282 28SSPCM16XV0DVA16XP282 28MLPCM16XV0DVA16XP282 40PPCM16XK1DVA16XP401 44LPCM16XK1DVA16XL441 44PQPCM16XK1DVA16PQ441 44PTPCM16XK1DVA16PQ441 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC16F872 PIC16F872 PIC16F872 PIC16F873 PIC16F873 PIC16F873A PIC16F873A PIC16F873A PIC16F873A PIC16F874 PIC16F874 PIC16F874 PIC16F874 PIC16F874A PIC16F874A PIC16F874A PIC16F874A PIC16F876 PIC16F876 PIC16F876A PIC16F876A PIC16F876A PIC16F876A PIC16F877 PIC16F877 PIC16F877 PIC16F877 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 119

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163022 DV164120* DV164120* DV164120* DV164120* DM163001 r P ware Tools, ®MPLAB CXX Compiler oft D 2 S C bugger, ®MPLAB I(6) ✓ ✓ ✓ ✓ ✓* ✓* ✓* ✓* ✓* ✓* ✓* ✓ ✓ ✓ ✓ ✓ ✓ ✓ Circuit De ®PICSTART Plus (5) ✓ AC164034 ✓* AC164031* ✓* AC164034* ✓* AC164031* ✓* AC164034* ✓ ✓ n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164309 AC164305 AC164322 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164305 AC164322 AC164301 AC164302 AC164307 AC164301 +AC164031 AC164301 AC164305 AC164322 AC164301 AC164302 AC164307 AC164301 AC164317 AC164316 AC164315 ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164013 AC164020 AC164012+AC164034 AC164012 AC164017 AC164021 AC164012 +AC164031 AC164012 AC164020 AC164012 +AC164034 AC164012 AC164017 AC164021 AC164012 +AC164031 AC164012 AC164020 AC164012 +AC164034 AC164001 AC164002 AC164015 AC174001 AC174002 AC174004 AC174005 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44QFN2 XLT28SO XLT28SS XLT28QFN4* XLT44PT or XLT44PT3 XLT44QFN2 XLT28SO XLT28SS XLT28QFN4* XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC16F877A40PPCM16XV0DVA16XP401 PIC16F877A44LPCM16XV0DVA16XL441 PIC16F877A44PTPCM16XV0DVA16PQ441 PIC16F877A44MLPCM16XV0DVA16XP401 PIC16F91328PPCM16YP0*DVA18XP280 PIC16F91328SOPCM16YP0*DVA18XP280 PIC16F91328SSPCM16YP0*DVA18XP280 PIC16F91328MLPCM16YP0*DVA18XP280 PIC16F91440PPCM16YP0*DVA18XP400 PIC16F91444PTPCM16YP0*DVA18PQ440 PIC16F91444MLPCM16YP0*DVA18XP400 PIC16F91628PPCM16YP0*DVA18XP280 PIC16F91628SOPCM16YP0*DVA18XP280 PIC16F91628SSPCM16YP0*DVA18XP280 PIC16F91628MLPCM16YP0*DVA18XP280 PIC16F91740PPCM16YP0*DVA18XP400 PIC16F91744PTPCM16YP0*DVA18PQ440 PIC16F91744MLPCM16YP0*DVA18XP400 PIC16HV54018P, 18JW PIC16HV54018SO PIC16HV54020SS PIC17C42A40P, 40JWPCM17XA0DVA17XP401 PIC17C42A44LPCM17XA0DVA17XL441 PIC17C42A44PQPCM17XA0DVA17PQ441 PIC17C42A44PTPCM17XA0DVA17PQ441 NOTE:See complete list of notes following this table. DS30177T-page 120 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163001 DM163001 DM173001 DM173001 DM173001 DM173001 DM163022 DM163022 DM163022 DM163022 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 oft D 2 S C ger, ®AB I(6) bug MPL Circuit De ®PICSTART Plus (5) ✓ ✓ AC164024 AC164024 AC164027 AC164027 ✓ ✓ ✓ n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164317 C164316 C164315 C164301 C164317 C164316 C164315 C164308* C164319* C164308* C164319* C164318 C164320 C164318 C164320 C164301 C164302 C164301 C164301 C164302 C164301 C164309 C164305 M P M A A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ® II PRO MATESocket Module (3,4) AC174001 AC174002 AC174004 AC174005 AC174001 AC174002 AC174004 AC174005 AC174007 AC174008 AC174007 AC174008 AC174012 AC174011 AC174012 AC174011 AC164012 AC164017 AC164012 AC164012 AC164017 AC164012 AC164013 AC164020 c mmer So m (2) Transition Socket a e gr yst TE® II Pro ® ICE 4000 S Device Adapters A B O M MPLA ssor ule R ed s, P ProcMo m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT28SO XLT28XP XLT28SO XLT44PT or XLT44PT3 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 40P, 40JWPCM17XA0DVA17XP401 44LPCM17XA0DVA17XL441 44PQPCM17XA0DVA17PQ441 44PTPCM17XA0DVA17PQ441 40P, 40JWPCM17XA0DVA17XP401 44LPCM17XA0DVA17XL441 44PQPCM17XA0DVA17PQ441 44PTPCM17XA0DVA17PQ441 68LPCM17XA0DVA17XL681 64PTPCM17XA0DVA17PQ641 68L, 68CLPCM17XA0DVA17XL681 64PTPCM17XA0DVA17PQ641 84LPCM17XA0DVA17XL841 80PTPCM17XA0DVA17PQ801 84L, 84CLPCM17XA0DVA17XL841 80PTPCM17XA0DVA17PQ801 28SP, 28JWPCM18XA0DVA16XP282 28SOPCM18XA0DVA16XP282 28SPPCM18XA0DVA16XP282 28JWPCM18XA0DVA16XP282 28SOPCM18XA0DVA16XP282 40P, 40JWPCM18XA0DVA16XP401 44LPCM18XA0DVA16XL441 44PTPCM18XA0DVA16PQ441 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC17C43 PIC17C43 PIC17C43 PIC17C43 PIC17C44 PIC17C44 PIC17C44 PIC17C44 PIC17C752 PIC17C752 PIC17C756/756A PIC17C756/756A PIC17C762 PIC17C762 PIC17C766 PIC17C766 PIC18C242 PIC18C242 PIC18C252 PIC18C252 PIC18C252 PIC18C442 PIC18C442 PIC18C442 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 121

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163006 DM163007 DM163006 DM163007 DM163022 DM163011 DM163022 DM163011 DM163022 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 oft D 2 S C bugger, ®MPLAB I(6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ De ® Circuit PICSTARTPlus (5) ✓ ✓(7) ✓(7) ✓ ✓ ✓ ✓ ✓ n- LAB® I ®AB PM3ocketdule (8) 164301 164309 164305 164308 164303 164308 164303 164304 164310 164310 164304 164301 164302 164301 164302 164301 164302 164301 164302 164301 164309 164305 P LSo C C C C C C C C C C C C C C C C C C C C C C M P M A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164013 AC164020 AC174007 AC174008 AC174007 AC174008 AC174011 AC174012 AC174012 AC174011 AC164012 AC164017 AC164012 AC164017 AC164012 AC164017 AC164012 AC164017 AC164012 AC164013 AC164020 c ammer So em (2) Transition Socket XLT68L1 XLT64PT2 or XLT64PT5 XLT80PT or XLT80PT3 XLT84L1 ACICE0204 XLT28SO ACICE0204 XLT28SO ACICE0206 XLT44L2 XLT44PT or XLT44PT3 gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-1 DAF18-1 DAF18-1 DAF18-1 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-3 DAF18-3 A B s, PRO M MPLA Processor Module PMF18WB1 PMF18WB1 PMF18WB1 PMF18WB1 PMF18WC1 PMF18WC1 PMF18WC1 PMF18WC1 PMF18WC1 PMF18WC1 PMF18WC1 m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT64PT2 or XLT64PT5 XLT80PT or XLT80PT3 XLT28SO XLT28SO XLT28SO XLT28SO XLT44PT or XLT44PT3 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 40P, 40JWPCM18XA0DVA16XP401 44LPCM18XA0DVA16XL441 44PTPCM18XA0DVA16PQ441 68L 64PT 68LPCM18XB0DVA18XL680 64PTPCM18XB0DVA18PQ640 80PT 84L 84LPCM18XB0DVA18XL840 80PTPCM18XB0DVA18PQ800 DVA16XP282 or28SPPCM18XH2DVA18XP280 DVA16XP282 or28SOPCM18XH2DVA18XP280 28SPPCM18XD1DVA16XP282 28SOPCM18XD1DVA16XP282 DVA16XP282 or28SPPCM18XH2DVA18XP280 DVA16XP282 or28SOPCM18XH2DVA18XP280 28SPPCM18XD1DVA16XP282 28SOPCM18XD1DVA16XP282 DVA16XP401 or40PPCM18XH2DVA18XP400 44LPCM18XH2DVA16XL441 DVA16PQ441 or44PTPCM18XH2DVA18PQ440 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC18C452 PIC18C452 PIC18C452 PIC18C601 PIC18C601 PIC18C658 PIC18C658 PIC18C801 PIC18C801 PIC18C858 PIC18C858 PIC18F242 PIC18F242 PIC18F248 PIC18F248 PIC18F252 PIC18F252 PIC18F258 PIC18F258 PIC18F442 PIC18F442 PIC18F442 NOTE:See DS30177T-page 122 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163011 DM163022 DM163011 DM163014 DM163014 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011* SW006011* SW006011* SW006011 SW006011 SW006011* SW006011* SW006011* oft D 2 S C bugger, ®MPLAB I(6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓* ✓* ✓* ✓ ✓ ✓* ✓* ✓* Circuit De ® PICSTARTPlus (5) ✓ ✓ ✓ ✓* AC164033* ✓* AC164033* ✓* ✓* n- s, MPLAB® I ®MPLAB PM3SocketModule (8) AC164301 AC164309 AC164305 AC164301 AC164309 AC164305 AC164301 AC164309 AC164305 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164307 AC164301+AC164031 AC164301 AC164302 AC164301* AC164302* AC164322* AC164301 AC164302 AC164301* AC164302* AC164322* ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164013 AC164020 AC164012 AC164013 AC164020 AC164012 AC164013 AC164020 AC164010 AC164010 AC164018 AC164010+AC164033 AC164010 AC164010 AC164018 AC164010+AC164033 AC164012 AC164017 AC164012* AC164017* AC164012 AC164017 AC164012* AC164017* c ammer So em (2) Transition Socket ACICE0206 XLT44L2 XLT44PT or XLT44PT3 ACICE0202 XLT18SO XLT20SS XLT28QFN3 ACICE0202 XLT18SO XLT20SS XLT28QFN3 ACICE0204 XLT28SO ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO ACICE0204 XLT28SO XLT28QFN4* gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-2 DAF18-3 DAF18-3 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-2 DAF18-4 DAF18-4 DAF18-4 DAF18-2 DAF18-2 DAF18-4 DAF18-4 DAF18-4 A B s, PRO M MPLA Processor Module PMF18WC1 PMF18WC1 PMF18WC1 PMF18WD0 PMF18WD0 PMF18WD0 PMF18WD0 PMF18WD0 PMF18WD0 PMF18WD0 PMF18WD0 PMF18WC1 PMF18WC1 PMF18WH0* PMF18WH0* PMF18WH0* PMF18WC1 PMF18WC1 PMF18WH0* PMF18WH0* PMF18WH0* m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT18SO XLT20SS XLT28QFN3 XLT18SO XLT20SS XLT28QFN3 XLT28SO XLT28SO XLT28QFN4* XLT28SO XLT28SO XLT28QFN4* E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 40PPCM18XD1DVA16XP401 44LPCM18XD1DVA16XL441 44PTPCM18XD1DVA16PQ441 40PPCM18XH2DVA16XP401 44LPCM18XH2DVA16XL441 44PTPCM18XH2DVA16PQ441 40PPCM18XD1DVA16XP401 44LPCM18XD1DVA16XL441 44PTPCM18XD1DVA16PQ441 18PPCM18XJ0DVA18XP180 18SOPCM18XJ0DVA18XP180 20SSPCM18XJ0DVA18XP180 28MLPCM18XJ0DVA18XP180 18PPCM18XJ0DVA18XP180 18SOPCM18XJ0DVA18XP180 20SSPCM18XJ0DVA18XP180 28MLPCM18XJ0DVA18XP180 28SPPCM18XH2DVA18XP280 28SOPCM18XH2DVA18XP280 28SPPCM18XN0*DVA18XP280 28SOPCM18XN0*DVA18XP280 28MLPCM18XN0*DVA18XP280 28SPPCM18XH2DVA18XP280 28SOPCM18XH2DVA18XP280 28SPPCM18XN0*DVA18XP280 28SOPCM18XN0*DVA18XP280 28MLPCM18XN0*DVA18XP280 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC18F448 PIC18F448 PIC18F448 PIC18F452 PIC18F452 PIC18F452 PIC18F458 PIC18F458 PIC18F458 PIC18F1220 PIC18F1220 PIC18F1220 PIC18F1220 PIC18F1320 PIC18F1320 PIC18F1320 PIC18F1320 PIC18F2220 PIC18F2220 PIC18F2221 PIC18F2221 PIC18F2221 PIC18F2320 PIC18F2320 PIC18F2321 PIC18F2321 PIC18F2321 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 123

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM183011, DM183021* DM183011, DM183021* DM163025 DM163025 DM163011 DM163022 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ AC162063* AC162063*+XLT28SO ✓* ✓* ✓* AC162067* AC162067* +XLT28SO AC162067* +XLT28SS ✓ ✓ ✓ Circuit De ®PICSTART Plus (5) ✓* AC164031* ✓ AC164031 ✓ AC164031 ✓* AC164031* ✓ ✓* AC164031* ✓ AC164031 n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164302 C164322 C164301 C164302 C164322 C164301 C164302 C164322 C164301 C164302 C164322 C164301 C164302 C164301 C164302 C164322 C164301* C164302* C164307* C164301 C164302 C164322 M P M A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164035 AC164036 AC164035 +AC164031 AC164035 AC164036 AC164035 +AC164031 AC164035 AC164036 AC164035 +AC164031 AC164035 AC164036 AC164035 +AC164031 AC164012 AC164017 AC164012 AC164036 AC164012 AC164017 AC164012 +AC164031 AC164012 AC164017 AC164012 +AC164031 c ammer So em (2) Transition Socket ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO XLT28QFN4* gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 A B s, PRO M MPLA Processor Module PMF18WF0 PMF18WF0 PMF18WF0 PCM18WH0 PCM18WH0 PCM18WH0 PCM18WH0 PCM18WH0 PCM18WH0 PMF18WF0* PMF18WF0* PMF18WF0* PMF18WL0 PMF18WL0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WH0 PMF18WH0 PMF18WH0 m ator Syste em (1) Transition Socket XLT28SO XLT28QFN4* XLT28SO XLT28QFN4* XLT28SO XLT28QFN4* XLT28SO XLT28QFN4* XLT28SO XLT28SO XLT28QFN4* XLT28SO XLT28QFN4* MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters PICmicro® Microcontroller Development Tools (continued) PIC18F233128SPPCM18XL0DVA18XP280 PIC18F233128SOPCM18XL0DVA18XP280 PIC18F233128MMPCM18XL0DVA18XP280 PIC18F241028SPPCM18XN0DVA18XP280 PIC18F241028SOPCM18XN0DVA18XP280 PIC18F241028MLPCM18XN0DVA18XP280 PIC18F242028SPPCM18XN0DVA18XP280 PIC18F242028SOPCM18XN0DVA18XP280 PIC18F242028MLPCM18XN0DVA18XP280 PIC18F243128SPPCM18XL0DVA18XP280 PIC18F243128SOPCM18XL0DVA18XP280 PIC18F243128MMPCM18XL0DVA18XP280 PIC18F243928P PIC18F243928SO PIC18F245528SPPCM18XR0DVA18XP280 PIC18F245528SOPCM18XR0DVA18XP280 PIC18F248028SPPCM18XP0DVA18XP280 PIC18F248028SOPCM18XP0DVA18XP280 PIC18F248028MMPCM18XP0DVA18XP280 PIC18F24J1028SP PIC18F24J1028SO PIC18F24J1028SS PIC18F251028SPPCM18XN0DVA18XP280 PIC18F251028SOPCM18XN0DVA18XP280 PIC18F251028MLPCM18XN0DVA18XP280 NOTE:See complete list of notes following this table. DS30177T-page 124 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163025 DM163025 DM163011 DM163011 DM163011 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ AC162063 AC162063+XLT28SO ✓ ✓ ✓ ✓ ✓ AC162067* AC162067* +XLT28SO AC162067* +XLT28SS ✓ ✓ ✓ ✓ ✓ ✓ Circuit De ® PICSTARTPlus (5) ✓ ✓ AC164031 ✓ ✓* ✓* AC164031* ✓ ✓ ✓ ✓ n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164302 C164301 C164302 C164322 C164301 C164302 C164301 C164302 C164301 C164302 C164322 C164301 C164302 C164301* C164302* C164307* C164301 C164302 C164301 C164302 C164301 C164302 M P M A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012* AC164017* AC164012 AC164017 AC164012 +AC164031 AC164012* AC164017* AC164012 AC164017 AC164012 AC164036 AC164012 AC164017 AC164012 +AC164031 AC164012 AC164017 AC164012 AC164017 AC164012 AC164017 AC164012 AC164017 c ammer So em (2) Transition Socket ACICE0204 XLT28SO ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO ACICE0204 XLT28SO ACICE0204 XLT28SO XLT28QFN4* ACICE0204 XLT28SO ACICE0204 XLT28SO ACICE0204 XLT28SO ACICE0204 XLT28SO gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 DAF18-4 A B s, PRO M MPLA Processor Module PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WL0 PMF18WL0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WJ0 PMF18WJ0 m ator Syste em (1) Transition Socket XLT28SO XLT28SO XLT28QFN4* XLT28SO XLT28SO XLT28SO XLT28QFN4* XLT28SO XLT28SO XLT28SO XLT28SO E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 28SPPCM18XN0DVA18XP280 28SOPCM18XN0DVA18CP280 28SPPCM18XN0DVA18XP280 28SOPCM18XN0DVA18XP280 28MLPCM18XN0DVA18XP280 28SPPCM18XN0DVA18XP280 28SOPCM18XN0DVA18XP280 28P 28SO 28SPPCM18XR0DVA18XP280 28SOPCM18XR0DVA18XP280 28SPPCM18XP0DVA18XP280 28SOPCM18XP0DVA18XP280 28MMPCM18XP0DVA18XP280 28SPPCM18XP0DVA18XP280 28SOPCM18XP0DVA18XP280 28SP 28SO 28SS 28SPPCM18XN0DVA18XP280 28SOPCM18XN0DVA18XP280 28SPPCM18XN0DVA18XP280 28SOPCM18XN0DVA18XP280 28SPPCM18XP0DVA18XP280 28SOPCM18XP0DVA18XP280 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC18F2515 PIC18F2515 PIC18F2520 PIC18F2520 PIC18F2520 PIC18F2525 PIC18F2525 PIC18F2539 PIC18F2539 PIC18F2550 PIC18F2550 PIC18F2580 PIC18F2580 PIC18F2580 PIC18F2585 PIC18F2585 PIC18F25J10 PIC18F25J10 PIC18F25J10 PIC18F2610 PIC18F2610 PIC18F2620 PIC18F2620 PIC18F2680 PIC18F2680 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 125

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM183011 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011* SW006011* SW006011* SW006011 SW006011 SW006011 SW006011* SW006011* SW006011* SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 oft D 2 S C bugger, ®MPLAB I(6) ✓ ✓ ✓ ✓* ✓* ✓* ✓ ✓ ✓ ✓* ✓* ✓* ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Circuit De ®PICSTART Plus (5) ✓ AC164034* ✓ AC164034 ✓ AC164034 ✓ AC164034 ✓ AC164034 n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164322 C164305 C164301* C164305* C164322* C164301 C164322 C164305 C164301* C164305* C164322* C164301 C164305 C164322 C164301 C164305 C164322 C164301 C164305 C164322 M P M A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164012+AC164034 AC164020 AC164012* AC164020* AC164012 AC164012+AC164034 AC164020 AC164012* AC164020* AC164012 AC164020 AC164012+AC164034 AC164012 AC164020 AC164012 +AC164034 AC164012 AC164020 AC164012 +AC164034 c mmer So m (2) Transition Socket ACICE0206 XLT44QFN2 XLT44PT or XLT44PT3 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44QFN2 XLT44PT or XLT44PT3 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 a e gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-2 DAF18-2 DAF18-3 DAF18-4 DAF18-5 DAF18-4 DAF18-2 DAF18-2 DAF18-3 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 A B s, PRO M MPLA Processor Module PMF18WC1 PMF18WC1 PMF18WC1 PMF18WH0* PMF18WH0* PMF18WH0* PMF18WC1 PMF18WC1 PMF18WC1 PMF18WH0* PMF18WH0* PMF18WH0* PMF18WF0 PMF18WF0 PMF18WF0 PCM18WH0 PCM18WH0 PCM18WH0 PCM18WH0 PCM18WH0 PCM18WH0 m ator Syste em (1) Transition Socket XLT44QFN2 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44QFN2 XLT44QFN2 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC18F422040PPCM18XH2DVA18XP400 PIC18F422044MLPCM18XH2DVA18XP400 PIC18F422044PTPCM18XH2DVA18PQ440 PIC18F422140PPCM18XN0*DVA18XP400 PIC18F422144PTPCM18XN0*DVA18PQ440 PIC18F422144MLPCM18XN0*DVA18XP400 PIC18F432040PPCM18XH2DVA18XP400 PIC18F432044MLPCM18XH2DVA18XP400 PIC18F432044PTPCM18XH2DVA18PQ440 PIC18F432140PPCM18XN0*DVA18XP400 PIC18F432144PTPCM18XN0*DVA18PQ440 PIC18F432144MLPCM18XN0*DVA18XP400 PIC18F433140PPCM18XL0DVA18XP400 PIC18F433144PTPCM18XL0DVA18PQ440 PIC18F433144MLPCM18XL0DVA18XP400 PIC18F441040PPCM18XN0DVA18XP400 PIC18F441044PTPCM18XN0DVA18PQ440 PIC18F441044MLPCM18XN0DVA18XP400 PIC18F442040PPCM18XN0DVA18XP400 PIC18F442044PTPCM18XN0DVA18PQ440 PIC18F442044MLPCM18XN0DVA18XP400 NOTE:See complete list of notes following this table. DS30177T-page 126 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM183011 DM163025 DM163025 DM163025 DM163011 DM163022 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ ✓ ✓ ✓ AC162063 AC162063+XLT44QFN2 AC162063+XLT44PT orXLT44PT3 ✓* ✓* ✓* AC162067* AC162067* +XLT44PT or XLT44PT3 AC162067* +XLT44QFN2 ✓ ✓ ✓ ✓ ✓ ✓ Circuit De ® PICSTARTPlus (5) ✓ AC164034 ✓ AC164034 ✓* AC164034* ✓ AC164034 ✓ AC164034 n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164305 C164322 C164301 C164322 C164305 C164301 C164305 C164322 C164301* C164305* C164322* C164301 C164305 C164322 C164301 C164305 C164322 M P M A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164020 AC164012+AC164034 AC164012 AC164012+AC164034 AC164020 AC164012 AC164012 +AC164034 AC164020 AC164012 AC164020 AC164012 +AC164034 AC164012 AC164020 AC164012 +AC164034 AC164012 AC164020 AC164012+AC164034 c mmer So m (2) Transition Socket ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44QFN2 XLT44PT or XLT44PT3 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 a e gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 A B s, PRO M MPLA Processor Module PMF18WF0 PMF18WF0 PMF18WF0 PMF18WL0 PMF18WL0 PMF18WL0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44QFN2 XLT44QFN2 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 40PPCM18XL0DVA18XP400 44PTPCM18XL0DVA18PQ440 44MLPCM18XL0DVA18XP400 40P 44ML 44PT 40PPCM18XR0DVA18XP400 44MLPCM18XR0DVA18XP400 44PTPCM18XR0DVA18PQ440 40PPCM18XP0DVA18XP400 44PTPCM18XP0DVA18PQ440 44MLPCM18XP0DVA18XP400 40P 44PT 44ML 40PPCM18XN0DVA18XP400 44PTPCM18XN0DVA18PQ440 44MLPCM18XN0DVA18XP400 40PPCM18XN0DVA18XP400 44PTPCM18XN0DVA18PQ440 44MLPCM18XN0DVA18XP400 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC18F4431 PIC18F4431 PIC18F4431 PIC18F4439 PIC18F4439 PIC18F4439 PIC18F4455 PIC18F4455 PIC18F4455 PIC18F4480 PIC18F4480 PIC18F4480 PIC18F44J10 PIC18F44J10 PIC18F44J10 PIC18F4510 PIC18F4510 PIC18F4510 PIC18F4515 PIC18F4515 PIC18F4515 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 127

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM163022 DM163025 DM163025 DM163025 DM163011 DM163011 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ AC162063 AC162063+XLT44QFN2 AC162063+XLT44PT orXLT44PT3 ✓ ✓ ✓ ✓ ✓ ✓ AC162067* AC162067* +XLT44PT or XLT44PT3 AC162067* +XLT44QFN2 Circuit De ®PICSTART Plus (5) ✓ AC164034 ✓ AC164034 ✓* AC164034* ✓* AC164034* ✓ AC164034 n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164305 C164322 C164301 C164305 C164322 C164301 C164322 C164305 C164301 C164305 C164322 C164301 C164305 C164322 C164301* C164305* C164322* M P M A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164020 AC164012 +AC164034 AC164012 AC164020 AC164012+AC164034 AC164012 AC164012+AC164034 AC164020 AC164012 AC164012 +AC164034 AC164020 AC164012 AC164020 AC164012 +AC164034 AC164012 AC164020 AC164012+AC164034 c mmer So m (2) Transition Socket ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44QFN2 XLT44PT or XLT44PT3 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 a e gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 A B s, PRO M MPLA Processor Module PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WL0 PMF18WL0 PMF18WL0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WJ0 m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 XLT44QFN2 XLT44PT or XLT44PT3 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC18F452040PPCM18XN0DVA18XP400 PIC18F452044PTPCM18XN0DVA18PQ440 PIC18F452044MLPCM18XN0DVA18XP400 PIC18F452540PPCM18XN0DVA18XP400 PIC18F452544PTPCM18XN0DVA18PQ440 PIC18F452544MLPCM18XN0DVA18XP400 PIC18F453940P PIC18F453944ML PIC18F453944PT PIC18F455040PPCM18XR0DVA18XP400 PIC18F455044MLPCM18XR0DVA18XP400 PIC18F455044PTPCM18XR0DVA18PQ440 PIC18F458040PPCM18XP0DVA18XP400 PIC18F458044PTPCM18XP0DVA18PQ440 PIC18F458044MLPCM18XP0DVA18XP400 PIC18F458540PPCM18XP0DVA18XP400 PIC18F458544PTPCM18XP0DVA18PQ440 PIC18F458544MLPCM18XP0DVA18XP400 PIC18F45J1040P PIC18F45J1044PT PIC18F45J1044ML NOTE:See complete list of notes following this table. DS30177T-page 128 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163026, DM163027-2 DM163011 DM163028 DM163028 DM183020 DM163015 DM183020 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 oft D 2 S C bugger, ®MPLAB I(6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓* ✓ ✓ ✓ ✓ Circuit De ® PICSTARTPlus (5) ✓ AC164034 ✓ AC164034 ✓ AC164034 ✓(7)* n- PLAB® I ®LAB PM3Socketodule (8) C164301 C164305 C164322 C164301 C164305 C164322 C164301 C164305 C164322 C164303 C164303 C164303 C164303 C164303 C164303 C164303* C164308 C164303 C164303 C164303 M P M A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC164012 AC164020 AC164012+AC164034 AC164012 AC164020 AC164012+AC164034 AC164012 AC164020 AC164012+AC164034 AC174008 AC174008 AC174008 AC174008 AC174008 AC174008 AC174008* AC174007 AC174008 AC174008 AC174008 ammer Soc em (2) Transition Socket ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT68L1 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-4 DAF18-5 DAF18-4 DAF18-6 DAF18-6 DAF18-6 DAF18-6 DAF18-6 DAF18-1 DAF18-6 DAF18-1 DAF18-1 DAF18-6 DAF18-1 A B s, PRO M MPLA Processor Module PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WH0 PMF18WJ0 PMF18WJ0 PMF18WJ0 PMF18WK0 PMF18WK0 PMF18WK0 PMF18WK0 PMF18WA2 PMF18WE0 PMF18WS0* PMF18WE0 PMF18WE0 PMF18WA2 PMF18WE0 m ator Syste em (1) Transition Socket XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 XLT44PT or XLT44PT3 XLT44QFN2 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT68L1 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 40PPCM18XN0DVA18XP400 44PTPCM18XN0DVA18PQ440 44MLPCM18XN0DVA18XP400 40PPCM18XN0DVA18XP400 44PTPCM18XN0DVA18PQ440 44MLPCM18XN0DVA18XP400 40PPCM18XP0DVA18XP400 44PTPCM18XP0DVA18PQ440 44MLPCM18XP0DVA18XP400 64PTPCM18XQ0DVA1003 64PTPCM18XQ0DVA1003 64PTPCM18XQ0DVA1003 64PTPCM18XQ0DVA1003 64PTPCM18XE1DVA18PQ640 64PTPCM18XK0DVA18PQ802 64PTPCM18XS0*DVA1003 68LPCM18XK0DVA18PQ802 64PTPCM18XK0DVA18PQ802 64PTPCM18XE1DVA18PQ640 64PTPCM18XK0DVA18PQ802 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC18F4610 PIC18F4610 PIC18F4610 PIC18F4620 PIC18F4620 PIC18F4620 PIC18F4680 PIC18F4680 PIC18F4680 PIC18F6310 PIC18F6390 PIC18F6410 PIC18F6490 PIC18F6520 PIC18F6525 PIC18F6527 PIC18F6585 PIC18F6585 PIC18F6620 PIC18F6621 NOTE:See © 2005 Microchip Technology Inc. DS30177T-page 129

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM183022 DM163015 DM183020 DM183022 DM163028 DM163028 DM183020 DM163015 DM183020 DM183022 r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 SW006011 bugger, Soft ®MPLAB ICD 2 (6) ✓* ✓ ✓ ✓ ✓ ✓ AC162062* ✓ ✓ ✓ ✓ ✓ ✓ ✓* ✓ ✓ ✓ ✓* ✓ Circuit De ® PICSTARTPlus (5) ✓(7)* ✓(7) n- PLAB® I ®LAB PM3Socketodule (8) C164303* C164303 C164308 C164303 C164303 C164303 C164319* C164304 C164304 C164304 C164304 C164304 C164304 C164304* C164304 C164304 C164304 C164304* C164304 M P M A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC174008* AC174008 AC174007 AC174008 AC174008 AC174008 AC174011 AC174011 AC174011 AC174011 AC174011 AC174011 AC174011* AC174011 AC174011 AC174011 AC174011* AC174011 ammer Soc em (2) Transition Socket XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT68L1 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-6 DAF18-6 DAF18-1 DAF18-1 DAF18-6 DAF18-6 DAF18-6 DAF18-6 DAF18-6 DAF18-6 DAF18-6 DAF18-1 DAF18-6 DAF18-1 DAF18-6 DAF18-1 DAF18-6 DAF18-6 A B s, PRO M MPLA Processor Module PMF18WS0* PMF18WS0 PMF18WE0 PMF18WE0 PMF18WA2 PMF18WS0 PMF18WK0 PMF18WK0 PMF18WK0 PMF18WK0 PMF18WA2 PMF18WE0 PMF18WS0* PMF18WE0 PMF18WA2 PMF18WE0 PMF18WS0* PMF18WS0 m ator Syste em (1) Transition Socket XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT68L1 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT64PT2 or XLT64PT5 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 E 2000 and MPLAB® ICE 4000 Emulstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Pkg TypeModuleAdapters ocontroller Development Tools (continued) 64PTPCM18XS0*DVA1003 64PTPCM18XS0DVA1003 68LPCM18XK0DVA18PQ802 64PTPCM18XK0DVA18PQ802 64PTPCM18XE1DVA18PQ640 64PTPCM18XS0DVA1003 64PT 80PTPCM18XQ0DVA1003 80PTPCM18XQ0DVA1003 80PTPCM18XQ0DVA1003 80PTPCM18XQ0DVA1003 80PTPCM18XE1DVA18PQ800 80PTPCM18XK0DVA18PQ802 80PTPCM18XS0*DVA1003 80PTPCM18XK0DVA18PQ802 80PTPCM18XE1DVA18PQ800 80PTPCM18XK0DVA18PQ802 80PTPCM18XS0*DVA1003 80PTPCM18XS0DVA1003 complete list of notes following this table. MPLAB® ICand Demon Part Number ®PICmicro Micr PIC18F6622 PIC18F6627 PIC18F6680 PIC18F6680 PIC18F6720 PIC18F6722 PIC18F67J10 PIC18F8310 PIC18F8390 PIC18F8410 PIC18F8490 PIC18F8520 PIC18F8525 PIC18F8527 PIC18F8585 PIC18F8620 PIC18F8621 PIC18F8622 PIC18F8627 NOTE:See DS30177T-page 130 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM163015 DM183020 DM183022 DV164102AC164101AC164103 DV164102AC164102AC164104 DV164102 DM300017 DM300017 DM300018* DM300018* DM300017 DM300017, DM300018* r P ware Tools, ®MPLAB CXX Compiler SW006011 SW006011 SW006011 SW006011 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 bugger, Soft ®MPLAB ICD 2 (6) ✓ ✓ ✓ AC162062* ✓ ✓ ✓ ✓* ✓* ✓* ✓* ✓* ✓* Circuit De ® PICSTARTPlus (5) ✓(7) ✓ ✓ ✓(7) ✓(7) ✓(7)* ✓(7)* ✓(7)* n- PLAB® I ®LAB PM3Socketodule (8) C164304 C164304 C164304 TBD C164301 C164307 C164301 C164302 C164307 C164307 C164307 C164302 C164301 C164322 C164302* C164301* C164322* C164302* C164301* C164322* M P M A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC174011 AC174011 AC174011 AC124001 AC124002 AC124001 AC124002 AC124002 AC124002 AC124002 AC30F004 AC30F004 AC30F005* AC30F005* AC30F004* AC30F004* c ammer So em (2) Transition Socket XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT28SO ACICE0204 XLT28QFN4* XLT18SO ACICE0202 XLT28SO ACICE0204 XLT28QFN4* gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF18-1 DAF18-6 DAF18-6 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 A B s, PRO M MPLA Processor Module PMF18WE0 PMF18WA2 PMF18WS0 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1* PMF30XA1* PMF30XA1* PMF30XA1* PMF30XA1* PMF30XA1* m ator Syste em (1) Transition Socket XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT80PT or XLT80PT3 XLT20SS XLT18SO XLT20SS XLT20SS XLT20SS MPLAB® ICE 2000 and MPLAB® ICE 4000 Emuland Demonstration Boards ®MPLAB ICE 2000 Syst Lead Count/Processor Device Part NumberPkg TypeModuleAdapters ®PICmicro Microcontroller Development Tools (continued) PIC18F868080PTPCM18XK0DVA18PQ802 PIC18F872080PTPCM18XE1DVA18PQ800 PIC18F872280PTPCM18XS0DVA1003 PIC18F87J1080PT ®rfPIC Microcontroller Development Tools rfPIC12C509AF20JWPCM16XA0DVA12XP080 rfPIC12C509AF20SSPCM16XA0DVA12XP080 rfPIC12C509AG18JWPCM16XA0DVA12XP080 rfPIC12C509AG18SOPCM16XA0DVA12XP080 rfPIC12F675F20SSPCM12XB0DVA12XP081 rfPIC12F675H20SSPCM12XB0DVA12XP081 rfPIC12F675K20SSPCM12XB0DVA12XP081 rfRXD042032LQ rfRXD092032LQ ®dsPIC DSC Development Tools dsPIC30F201028SO dsPIC30F201028SP dsPIC30F201028MM dsPIC30F201118SO dsPIC30F201118P dsPIC30F201128ML dsPIC30F201228SO dsPIC30F201228SP dsPIC30F201228ML NOTE:See complete list of notes following this table. © 2005 Microchip Technology Inc. DS30177T-page 131

Development Systems Ordering Guide ogrammers Demonstration Boards or Evaluation Kits DM300017 DM300017, DM300018* DM30018* DM300018* DM300017 DM300017, DM300018* DM300018* DM300018* DM300017 DM300017, DM300018* DM300018* r P ware Tools, ®MPLAB CXX Compiler SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 oft D 2 S C ger, ®AB I(6) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ bug MPL De ® Circuit PICSTARTPlus (5) n- LAB® I ®AB PM3ocketdule (8) 164302 164301 164322 164301 164305 164322 164302 164301 164322 164302 164301 164322 164301 164305 164322 164301 164305 164322 164302 164301 164322 164301 164305 164322 P LSo C C C C C C C C C C C C C C C C C C C C C C C C M P M A A A A A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC30F004 AC30F004 AC30F003 AC30F006 AC30F005* AC30F005* AC30F004 AC30F004 AC30F003 AC30F006 AC30F003 AC30F006 AC30F004 AC30F004 AC30F003 AC30F006 c ammer So em (2) Transition Socket XLT28SO ACICE0204 XLT44QFN4* ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 XLT18SO ACICE0202 XLT44QFN5* XLT28SO ACICE0204 XLT44QFN3* ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 XLT28SO ACICE0204 XLT44QFN4* ACICE0206 XLT44PT or XLT44PT3 XLT44QFN2 gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-3 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-3 DAF30-4 DAF30-4 DAF30-3 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-4 DAF30-3 DAF30-4 A B s, PRO M MPLA Processor Module PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 PMF30XA1 m ator Syste em (1) Transition Socket 4000 Emul CE 2000 Syst Device Adapters his table. E ® I g t E 2000 and MPLAB® ICstration Boards MPLAB Lead Count/Processor Pkg TypeModule velopment Tools (continued) 28SO 28SP 44ML 40P 44PT 44ML 18SO 18P 44ML 28SO 28SP 44ML 40P 44PT 44ML 40P 44PT 44ML 28SO 28SP 44ML 40P 44PT 44ML complete list of notes followin B® ICemon umber DSC De F3010 F3010 F3010 F3011 F3011 F3011 F3012 F3012 F3012 F3013 F3013 F3013 F3014 F3014 F3014 F4011 F4011 F4011 F4012 F4012 F4012 F4013 F4013 F4013 See MPLAand D Part N ®dsPIC dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 NOTE: DS30177T-page 132 © 2005 Microchip Technology Inc.

Cross Reference ogrammers Demonstration Boards or Evaluation Kits DM300016 DM300014,DM300004-1,DM300004-2 DM300020 DM300020 DM300020 DM300016 DM300016 DM300016 DM300016 DM300014 DM300014 DM300014,DM300004-1,DM300004-2 DM300014, DM300004-1, DM300004-2 r P ware Tools, ®MPLAB CXX Compiler SW006012 SW006012 SW006012* SW006012* SW006012 SW006012* SW006012* SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012 SW006012* oft D 2 S C ger, ®AB I(6) ✓ ✓ ✓* ✓* ✓ ✓* ✓* ✓ ✓* ✓* ✓ ✓* ✓* ✓ ✓* ✓* ✓ ✓* ✓* ✓* bug MPL Circuit De ® PICSTARTPlus (5) n- PLAB® I ®LAB PM3Socketodule (8) C164319 C164320 C164319* C164320* C164314 C164314* C164320* C164313 C164313* C164319* C164313 C164313* C164319* C164314 C164314* C164320* C164314 C164314* C164320* C164319* M P M A A A A A A A A A A A A A A A A A A A A s, M ket Module ®PRO MATE II Socket Module (3,4) AC30F008 AC30F007 AC30F008* AC30F001 AC30F007* AC30F002 AC30F008* AC30F008* AC30F002 AC30F002* AC30F008* AC30F001 AC30F001* AC30F007* AC30F001 AC30F001* AC30F007* ammer Soc em (2) Transition Socket XLT64PT2 or XLT64PT5 XLT80PT or XLT80PT3 XLT64PT2 or XLT64PT5 XLT80PT2 XLT80PT2 XLT80PT or XLT80PT3 XLT64PT3 or XLT64PT4 XLT64PT3 or XLT64PT4 XLT64PT2 or XLT64PT5 XLT64PT3 or XLT64PT4 XLT64PT3 or XLT64PT4 XLT64PT2 or XLT64PT5 XLT80PT2 XLT80PT2 XLT80PT or XLT80PT3 XLT80PT2 XLT80PT2 XLT80PT or XLT80PT3 gr yst TE® II Pro ® ICE 4000 S Device Adapters DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 DAF30-2 A B s, PRO M MPLA Processor Module PMF30XA1 PMF30XA1 PMF30XA1* PMF30XA1 PMF30XA1* PMF30XA1* PMF30XA1 PMF30XA1* PMF30XA1* PMF30XA1 PMF30XA1* PMF30XA1* PMF30XA1 PMF30XA1* PMF30XA1* PMF30XA1 PMF30XA1* PMF30XA1* m ator Syste em (1) Transition Socket 4000 Emul CE 2000 Syst Device Adapters his table. E ® I g t E 2000 and MPLAB® ICstration Boards MPLAB Lead Count/Processor Pkg TypeModule velopment Tools (continued) 64PT 80PT 64PT 80PT 80PF 80PF 80PT 64PF 64PF 64PT 64PF 64PF 64PT 80PF 80PF 80PT 80PF 80PF 80PT 64PT complete list of notes followin B® ICemon umber DSC De F5011 F5013 F5015 F5016 F6010 F6010A F6010A F6011 F6011A F6011A F6012 F6012A F6012A F6013 F6013A F6013A F6014 F6014A F6014A F6015 See MPLAand D Part N ®dsPIC dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 dsPIC30 NOTE: © 2005 Microchip Technology Inc. DS30177T-page 133

Development Systems Ordering Guide s r e m m a r g o r P s, ol o T e r a w oft S r, e g g u b e D uit c r Ci n- ® I B A L P M s, e ul d Mo mer. et am ck ogr o Pr MPLAB® ICE 2000 and MPLAB® ICE 4000 Emulator Systems, PRO MATE® II Programmer Sand Demonstration Boards - NOTES NOTES1:MPLAB® ICE 2000 pod available separately. (ICE2000)2:MPLAB® ICE 4000 pod available separately. (ICE4000)3:PRO MATE® II Programmer unit (no longer available). (DV007003)4:Optional In-Circuit Serial Programming™ (ICSP™) Socket for PRO MATE® II available separately. (AC004004)5:PICSTART® Plus (DV003001)6:MPLAB® ICD 2 In-Circuit Debugger. Configurations are:(DV164005) ICD 2 module, USB cable and ICD cable.(DV164006) ICD 2 module, USB cable, ICD cable, serial cable, PICDEM™ 2 Plus and power supply.(DV164007) ICD 2 module, USB cable, ICD cable, serial cable and power supply;(DV164030) ICD 2 module, USB cable, ICD cable, serial cable and dsPICDEM™ Starter Demo Board;(AC162049) ICD 2 Universal Programming Module;(AC162051) ICD or ICD 2 28/40 PDIP Header Interface Board.7:Custom adapter required; not available from Microchip. See “Readme” for PICSTART® Plus.8:MPLAB® PM3 Programmer Unit available separately. (DV007004). ICSP™ function is built-in with MPLAB® PM3 (AC164350) MPLAB® PM3 Adapter for PRO MATE® II Socket modules.* New product or future support. Contact Microchip web site at www.microchip.com for availability.✓Supported with basic configuration. If a part number is listed in the column, that part is required and available separately. DS30177T-page 134 © 2005 Microchip Technology Inc.

Cross Reference X X X F 8 1 C PI d n a d Evaluation Kits Description PICDEM™ 1 Demo Board for PIC16C5X, 55X, 62X, CE62X, 71, 710, 711, 715, 770, 771, 83, 84, and PIC17C42, 43, 44 PICDEM™ 3 Demo Board for PIC16C923, 924 LCD PICDEM™ 18R Demo Board for PIC18C601/801 PICDEM™ 4 Demo Board for PIC12F629, 675, PIC16F630, 676, 684, 627A, 628A, 648A, 818, 819, 87, 88, PIC18F1220, 1320 PICDEM™ 2 Plus Demo Board for PIC16C62, 63, 64, 65, 66, 67, 72, 73, 74, 76, 77, 87X, 773, 774 and PIC18CXX2, 642, 662, Low-Power Solutions Demo Board PICDEM™ LCD Demo Board (uses 64L/80L PIC18FXX90 and 28L/40L PIC16F91X family) PICkit™ 1 8/14P Flash Development Kit for PIC12F629, 675 and PIC16F630, 676 ®rfPIC Development Kit 1 PICkit 2 Starter Kit ®rfPIC Transmitter Module (433.92 MHz) ®rfPIC Transmitter Module (315 MHz) rfRXD Receiver Module (433.92 MHz) rfRXD Receiver Module (315 MHz) Signal Analysis PICtail™ Daughter Board PIC10F2XX Programmer Adapter 6L SOT-23 to 8P DIP Adapter Kit PICDEM™ 17 Demo Board for PIC17CXX PICDEM™ MC Development Board (uses 28L/40L PIC18FXX31 family) PICDEM™ MC LV Development Board (uses 28L PIC18F2331, 2431, dsPIC30F family) PICDEM™ HPC Explorer Board PICDEM.net™ TCP/IP Demo Board (with no text book) PICDEM™ LIN Demo Board for PIC16C432/433 LIN bus PICDEM™ CAN-LIN 1 Demo Board (uses 68L/84L PIC18CXX8 family) PICDEM™ USB Demo Board for PIC16C7X5 PICDEM™ CAN-LIN 2 Demo Board (uses 28L/40L PIC18FXX8 and PIC18FXX8X family) PICDEM™ CAN-LIN 3 Demo Board (uses 64L/80L PIC18FXX8X family) PICDEM™ FS USB Demo Board PICDEM™ Z 2.4 GHz Demonstration Kit PICDEM™ Z Motherboard PICDEM™ Z 2.4 GHz RF Card www.microchip.com for availability. ds an Kits n Kits site at monstration Boar Part Number ®micro Demonstration M163001 M163003 M163006 M163014 M163022 M163026 M163028 V164101 V164102 V164120* C164101 C164102 C164103 C164104 C164120 C163020 C163021 M173001 M183011 M183021* M183022 nectivity Demonstratio M163004-LT M163005 M163007 M163010 M163011 M163015 M163025 M163027-2 C163027-1 C163027-2 ontact Microchip web De PIC D D D D D D D D D D A A A A A A A D D D D Con D D D D D D D D A A * C © 2005 Microchip Technology Inc. DS30177T-page 135

Development Systems Ordering Guide t n o pti cri s e D m) Demonstration Boards and Evaluation Kits Part Number Mixed Signal Control Demonstration Kits AC163001PICDEM™ MSC 1 Voltage Boost Demo Board; requires DM163012 AC163002PICDEM™ MSC 1 High Power IR Demo Board; requires DM163012 AC163003PICDEM™ MSC 1 Delta Sigma Demo Board; requires DM163012 AC163004PICDEM™ MSC 1 Flow Rate Sensor Demo Board; requires DM163012 DM163012PICDEM™ MSC 1 Mixed Signal Controller Demo Board for PIC16C781/782 ®dsPIC Digital Signal Controller Demonstration Kits DM300004-1dsPICDEM.net™ 1 FCC/JATE PSTN Support, Ethernet NIC Demo Board DM300004-2dsPICDEM.net™ 2 CTR-21 PSTN Support, Ethernet NIC Demo Board DM300014dsPICDEM™ 1.1 General Purpose Demo Board DM300016dsPICDEM™ 64-Pin Starter Demo Board DM300017dsPICDEM™ 28-Pin Starter Demo Board DM300018*dsPICDEM™ 2 Demo Board DM300020dsPICDEM™ MC1 Motor Control Development Board DM300021dsPICDEM™ MC1H 3-Phase High Voltage Power Module DM300022dsPICDEM™ MC1L 3-Phase Low Voltage Power Module ®dsPIC 16-bit DSC Software Tools SW300001Digital Filter Design ®SW300002 V.22/V.22bis Soft Modem Library (free download: www.microchip.codsPIC ®SW300003-EVALdsPIC V.32 Soft Modem Library (Eval Copy) ®SW300003, 04, 05dsPIC V.32 Soft Modem Library (5K, 25K, 100K licenses, respectively) ®SW300006*dsPIC V.22/V.22bis Soft Modem Library by Vocal Technology ®SW300010-EVALdsPIC Speech Recognition (Eval Copy) ®SW300010, 11, 12dsPIC Speech Recognition (5K, 25K, 100K licenses, respectively) SW300020dsPIC30 Math Library: Double-Precision Floating Point Routines SW300021dsPIC30 Peripheral Library: Peripheral Initialization and Control Routines SW300022dsPIC30 DSP Library: Data Signal Processing Library Suite (FFT, Filters) SW300023dsPICworks™ Visual Algorithm Analyzer: Data Analyzer and Converter Tool ®SW300030 CMX Scheduler: Multi-tasking, Preemptive Scheduler for dsPIC30FdsPIC * Contact Microchip web site at www.microchip.com for availability. DS30177T-page 136 © 2005 Microchip Technology Inc.

Cross Reference t n o pti cri s e n D o Demonstration Boards and Evaluation Kits Part NumberDescripti ®dsPIC 16-bit DSC Software Tools (continued) ®SW300031CMX-RTX for dsPIC DSC: Fully Preemptive RTOS ®SW300032CMX-Tiny+ for dsPIC DSC: Preemptive RTOS ® SW300040-EVAL, 5K, 25K, 100KdsPICNoise Suppression Library (Eval, 5K, 25K, 100K licenses, respectively) ®SW300050-EVAL, 5K, 25K, 100KdsPIC Symmetric Embedded Encryption Library (Eval, 5K, 25K, 100K licenses, respectively) ®SW300055-EVAL, 5K, 25K, 100KdsPIC Asymmetric Embedded Encryption Library (Eval, 5K, 25K, 100K licenses, respectively) ® SW300060-EVAL, 5K, 25K, 100KdsPICAcoustic Echo Cancellation Library (Eval, 5K, 25K, 100K licenses, respectively) ®SW300070-EVAL, 5, 25, 100K*dsPIC Speech Coding/Decoding Library (Eval, 5K, 25K, 100K licenses, respectively) * Contact Microchip web site at www.microchip.com for availability. ®PowerSmart Systems Model Name/Part Number PS042PS401 PowerCal™ Board PS051PowerInfo™ 2 Configuration Interface Board for use with PS70X and PS50X PS052PowerCal™ 2 Configuration Interface Board for use with PS70X and PS50X PS070*PowerMate™ Development Software for PS700 Applications PS2070*PS200 Configurable Battery Charger Evaluation Board PS2070EV*PS200 Configurable Battery Charger Evaluation Board with PS051 PowerInfo™ 2 PS5100PS501 6-12 cell NiMH Module PS5100EVPS501 6-12 cell NiMH Module with PS051 PS51622-cell Li-Ion/Poly Fuel Gauge with safety PS5162EV2-cell Li-Ion/Poly Fuel Gauge with safety and PS051 PowerInfo™ 2 PS51633-cell Li-Ion/Poly Fuel Gauge with safety PS5163EV3-cell Li-Ion/Poly Fuel Gauge with safety and PS051 PowerInfo™ 2 PS51644-cell Li-Ion/Poly Fuel Gauge with safety PS5164EV4-cell Li-Ion/Poly Fuel Gauge with safety and PS051 PowerInfo™ 2 PS7051Single Cell Li-Ion Battery Monitor with safety PS7052Two Cell Li-Ion Battery Monitor with safety PS7070PS700 Battery Monitor Evaluation Board PS7070EVPS700 Battery Monitor Evaluation Board with PS051 PowerInfo™ 2 PS8070*PS8X0 Li-Ion/Poly Single Cell Fuel Gauge PS8070EV*PS8X0 Li-Ion/Poly Single Cell Fuel Gauge with PS051 PowerInfo™ 2 * Contact Microchip web site at www.microchip.com for availability. © 2005 Microchip Technology Inc. DS30177T-page 137

Development Systems Ordering Guide t CS512 164002 164001 CP1541 H C C M All serial EEPROMS, 24XX, 93XX, 25XX series HCS365/370HCS410/412HCS473HCS500/515 –DM303005–– DM303006DM303006DM303006DM303006 AC004003AC004002AC004003–A AC004007AC004001AC004007–A AC004004AC004004AC004004AC004004 MCRF355MCRF450/452 DV103003, DV103006DV103006 PG103003– Devices Supported MCP2140 MCP2150/55 MCP25020, MCP25025, MCP25050, MCP25055 MCP2510, MCP2515 MCP2120, MCP2150 MCP23008, MCP23S08 MCP23017, MCP23S17 Devices Supported MCP6S22/92 MCP6S22/92 MCP6S22/92 MCP6S2X Devices Supported X, MCP330X, MCP320X, MCP494X, MCP3221, MCP3201, MCP1525, TX3400X MCP3001, MCP3002, MCP3201, MCP3202 MCP3201/02 2 3 1 X HCS362 – M303006 C004002 C004001 C004004 T D A A A 2 DV24300 HCS360/361 – DM303006 AC004002 AC004001 AC004004 S D H HCS300/301/320 – DM303006 AC004002 AC004001 AC004004 Part Number MCP2140DM-TMPSN MCP215XDM DV250501 DV251001 DM163008 MCP23X08EV MCP23X17EV Part Number MCP6S22DM-PICTL MCP6SX2DM-PCTLP MCP6SX2DM-PCTLT MCP6S2XEV Part Number MXSIGDM TX3400EV DV3201A DV3201A HCS200/201 – DM303006 AC004002 AC004001 AC004004 HCS101 – DM303006 AC004002 AC004001 AC004004 ® IDE release 5.70. er’s Kits Memory Evaluation/Developer’s Kits ®SEEVAL 32 Serial EEPROM Developer’s Kit ®KL Evaluation KitsEEOQ ®KL Transponder Evaluation Kit*EEOQ ®KL Evaluation Kit II*EEOQ ®PRO MATE II Universal Programmer for SOIC* ®PRO MATE II Universal Programmer for DIP* ®PRO MATE II Universal Programmer for ICSP™* ®* Support is limited to PRO MATE II using MPLAB RFID Evaluation/Developer’s Kits ®13.56 MHz Anti-Collision micro Developer’s Kit ID®micro Programmer Kit only for MCRF355ID Analog/Interface Demo/Eval/Develop Interface ®MCP2140 IrDA Wireless Temp. Demo MCP215X Data Logger Demo Board MCP250XX CAN I/O Expanders Developer’s Kit MCP2510/2515 CAN Developer’s Kit MCP2120/2150 Developer’s Kit MCP23X08 Evaluation Board MCP23X17 Evaluation Board Linear MCP6S22 PGA PICtail™ Demo Board MCP6SX2 PGA Photodiode PICtail™ Demo Board MCP6SX2 PGA Thermistor PICtail™ Demo Board MCP6S2X PGA Evaluation Board Mixed Signal Mixed Signal PICtail™ Demo Board Evaluation Kit for Sigma-Delta A/D Converter Family Single-Dual A/D MCP3201/02 Evaluation System Daughter Board DS30177T-page 138 © 2005 Microchip Technology Inc.

Cross Reference t B 9 4 6 C T B, 8 4 6 8 C 04/0 B, T Devices Supported MCP3001/02, MCP3004,/08, MCP3201/02, MCP32 MCP3204, MCP3208 MCP42010, MCP42050, MCP42100 MCP4021, MCP4022, MCP4023, MCP4024 Devices Supported MCP1612 MCP1630 MCP1630 MCP1630 MCP1601 SOT-23 packages MCP73861/62 MCP1650/51 MCP1650 MCP7384X MCP7382X MCP73855 SOT23-5/6-lead packages MCP1726 Devices Supported MCP9800 TC74 TC652 TC650 6, TC647, TC648, TC649, TC642B, TC646B, TC647 TC72 TC77 TC642 TC1047A 4 6 C T 2, 4 6 C T Part Number DVMCPA DV3204A DV42XXX MCP402XEV Part Number MCP1612EV MCP1630RD-DDBK1 MCP1630RD-LIC1 MCP1630DM-NMC1 MCP1601EV VSUPEV MCP7386XEV MCP1650DM-LED1 MCP1650EV MCP7384XEV MCP7382XEV MCP73855EV VSUPEV2 MCP1726EV Part Number MCP9800DM-PCTL TC74DEMO TC652DEMO TC650DEMO TC642EV TC72DM-PICTL TC77DM-PICTL TC642DEMO TC1047ADM-PICTL s Kit Analog/Interface Demo/Eval/Developer’s Mixed Signal (continued) MXDEV Analog Evaluation System MCP3204/08 Evluation System Daughter Board MCP42XXX Digital Pot Evaluation Kit MCP402X Evaluation Board Power Management MCP1612 Synchronous Buck Regulator Evaluation Board MCP1630 +12V Dual Output Buck Converter Ref. Design MCP1630 Li-Ion Multi Bay Battery Charger Ref. Design MCP1630 NiMH Battery Charger Demo Board MCP1601 Buck Regulator Evaluation Board Voltage Supervisor Evaluation Board MCP7386X Li-Ion Battery Charger Evaluation Board MCP165X 3W White LED Demo Board MCP1650 Boost Controller Evaluation Board MCP7384X Li-Ion Battery Charger MCP7382X Li-Ion Battery Charger MCP73855 Evaluation Board Voltage Supervisor SOT23-5/6 Evaluation Board MCP1726 Evaluation Board Thermal Management Tools MCP9800 Thermal Sensor PICtail™ Demo Board Demo Board for Tiny Serial Digital Thermal Sensor Fan Controller Demo Board for TC652 Fan Controller Demo Board for TC650 Evaluation Kit for the Fan Speed Controllers TC72 Digital Temperature Sensor TC77 Thermal Sensor PICtail™ Demo Demo Board for Fan Speed Controllers TC1047A Temperature to Voltage © 2005 Microchip Technology Inc. DS30177T-page 139

Development Systems Ordering Guide NOTES: DS30177T-page 140 © 2005 Microchip Technology Inc.

Index A MXDEV Analog Evaluation System (DVMCPA) .....................92 Analog and Mixed-Signal Demo Boards and Kits PICDEM MSC1 Delta-Sigma ADC Daughter 13.56 MHz Anticollision microID Developer’s Kit for Board (AC163003) ..................................................79 MCRF355/360 (DV103003) ...................................89 PICDEM MSC1 Demonstration Kit (DM163012) ....................78 13.56 MHz Anticollision microID Developer’s Kit for PICDEM MSC1 Flow Rate Sensor Daughter MCRF355/360/45X (DV103006) ............................90 Board (AC163004) ..................................................79 FilterLab Active Filter Design Software ..................................95 PICDEM MSC1 Infrared (IR) Driver Daughter MCP1252 Charge Pump Backlight Demo Board Board (AC163002) ..................................................79 (MCP1252DM-BKLT) .............................................93 PICDEM MSC1 Switch Mode Power Supply (SMPS) MCP1601 Buck Regulator Evaluation Board Daughter Board (AC163001) ..................................79 (MVCP1601EV) .....................................................93 SEEVAL 32 Serial EEPROM Evaluation System MCP1630 NiMH Battery Charger Demo Board Designer’s Kit (DV243002) .....................................88 (MCP1630DM-NMC1) ............................................93 SOIC 8-Lead Evaluation Board (SOIC8EV) ...........................93 MCP1650 Boost Controller Evaluation Board SOT-23-3 Voltage Supervisor Evaluation (MCP1650EV) ........................................................93 Board (VSUPEV) ....................................................93 MCP165X 3W White LED Demo Board SPICE Software Models .........................................................95 (MCP1650DM-LED1) .............................................93 TC1047A Temperature-to-Voltage Converter PICtail MCP1726 LDO Evaluation Board (MCP1726EV) ..................93 Daughter Board (1047ADM-PCTL) ........................94 MCP2120/2150 Developer’s Kit (DM163008) ........................91 TC340X Delta-Sigma A/D Converter MCP2120/2150 Infrared Developer’s Kit (DM163008) ...........87 Evaluation Kit (TC3400EV) .....................................92 MCP2140 IrDA Wireless Temp Demo Board TC642DEMO Fan Controller Demo Board for (MCP2140DM-TMPSNS) .......................................91 TC642/646/647/648/649 (TC642DEMO) ................84 MCP215X Data Logger Demo Board (MCP215XDM) ...........91 TC642EV Evaluation Kit for Brushless DC Fan MCP250XX CAN I/O Expander Developer’s Kit Controllers (TC642EV) ...........................................84 (DV250501) ......................................................86, 91 TC64X/64XB Fan Speed Controller Demo Board MCP2510 CAN Developer’s Kit (DV251001) .........................85 (TC642DEMO) ........................................................94 MCP2510/2515 CAN Developer’s Kit (V251001) ...................91 TC64X/64XB Fan Speed Controller Evaluation MCP3201/02 Single/Dual A/D Converter Board (TC642EV) ...................................................94 MXDEV Evaluation System Daughter Board TC650 Fan Speed Controller Demo Board (DV3201A) .............................................................92 (TC650DEMO) ........................................................94 MCP3204/08 MXDEV Evaluation System TC650DEMO Fan Controller Demo Board for Daughter Board (DV32XXX) ..................................92 TC650/651 (TC650DEMO) .....................................84 MCP3221 12-Bit A/D PICtail Daughter Board TC652 Fan Speed Controller Demo Board (MCP3221DM-PCTL) .............................................92 (TC652DEMO) ........................................................94 MCP402X Digital Potentiometer Evaluation TC652DEMO Fan Controller Demo Board for Board Kit (MCP402XEV) ........................................92 TC652/653 (TC652DEMO) .....................................84 MCP41XXX/42XXX Digital Potentiometer TC72 Digital Temperature Sensor PICtail Daughter Evaluation Board (DV42XXX) ................................80 Board (TC72DM-PICTL) .........................................94 MCP42XXX Digital Pot MXDEV Evaluation TC74 Serial Digital Thermal Sensor Demo Board System Daughter Board (DV42XXX) .....................92 (TC74DEMO) ..........................................................94 MCP6S22 PGA PICtail Daughter Board TC74DEMO Serial Digital Temperature Sensor (MCP6S22DM-PCTL) ............................................91 Demo Board (TC74DEMO) ....................................84 MCP6S2X PGA Evaluation Board (MCP6S2XEV) ................91 TC77 Thermal Sensor PICtail Daughter Board MCP6S2X PGA Photodiode PICtail Daughter (TC77-DM-PICTL) ..................................................94 Board (MCP6SX2DM-PCTLPD) ............................91 B MCP6S2X PGA Thermistor PICtail Daughter Battery Management Products Board (MCP6SX2DM-PCTLTH) ............................91 PowerSmart Battery Manager Evaluation Kit for MCP7382X Li Ion Battery Charger Lithium Ion/Polymer Chemistries/2-Cell Evaluation Board (MCP382XEV) ...........................93 (PS5162EV) .........................................................100 MCP7384X Li Ion Battery Charger PowerSmart Battery Manager Evaluation Kit for Evaluation Board (MCP7384XEV) .........................93 Lithium Ion/Polymer Chemistries/3-Cell MCP9700 Thermal Sensor PICtail (PS5163EV) .........................................................100 Daughter Board (MCP9700DM-PCTL) ..................94 PowerSmart Battery Manager Evaluation Kit for microID Contact Programmer Kit for Lithium Ion/Polymer Chemistries/4-Cell MCRF355/360 (PG103003) .............................89, 90 (PS5164EV) .........................................................100 Mixed-Signal PICtail Daughter Board (MXSIGDM) ................92 PowerSmart Battery Monitor Evaluation Kit for MXDEV 1 Analog Evaluation System Driver Board 1 and 2 Series Cell Lithium Ion/Polymer (DVMCPA) .............................................................81 Chemistries (PS7070EV) ......................................101 MXDEV 1 MCP3XXX Quad/Octal ADC Evaluation C System Daughter Board Kit (DV3204A) .................83 Cross Reference MXDEV 1 MCP3XXX Single/Dual ADC Evaluation Development Systems Cross Reference ......................104–140 System Daughter Board (DV3201A) ......................82 © 2005 Microchip Technology Inc. DS30177T-page 141

Development Systems Ordering Guide D MPLAB ICD 2 Evaluation Kit (DV164006) ..............................32 dsPIC DSC Demo Boards and Kits MPLAB ICD 2 Module (DV164005) ........................................32 MPLAB ICD 2 with dsPICDEM 1.1 General Purpose MPLAB ICD 2 Module ws (DV164007) ...................................32 Demonstration Board (DV164032) .........................72 MPLAB ICD 2 with dsPICDEM 1.1 General Purpose MPLAB ICD 2 with dsPICDEM Starter Demonstration Board (DV164032) .........................32 Demonstration Board (DV164030) .........................70 MPLAB ICD 2 with dsPICDEM Starter dsPIC DSC Development Boards, Kits Demonstration Board (DV164030) .........................32 24V BLDC Motor (AC300020) ................................................74 PIC10F2XX Programmers/Adapters 3-Phase ACIM (AC300021) ...................................................74 Baseline Flash MCU Programmer (PG164101) .............37 dsPICDEM 1.1 General Purpose Development PIC10F2XX SOT-23 to DIP-8 Programmer Board (DM300014) ................................................72 Adapter Kit (AC163021) .................................37 dsPICDEM 2 Development Board (DM300018) .....................73 PIC10F2XX Universal Programmer Adapter dsPICDEM 28-Pin Starter Development Board (AC163020) ....................................................37 (DM300017) ...........................................................71 PIC16F630/676 MPLAB ICD 2 Header Interface dsPICDEM MC1 Motor Control Development Module - 14-Pin DIP (AC162052) ...........................33 Board (DM300020) ................................................74 PIC16F648A/627A/628A MPLAB ICD 2 Header dsPICDEM MC1H 3-Phase High-Voltage Interface Module - 18-Pin DIP (AC162053) ............33 Power Module (DM300021) ...................................74 PICkit 1 Flash Starter Firmware Upgrade Kit dsPICDEM MC1L 3-Phase Low-Voltage (UK164101) ............................................................35 Power Module (DM300022) ...................................74 PICkit 1 Flash Starter Kit dsPICDEM Starter Development Board (DM300016) ............70 PIC10F2XX SOT-23 to DIP-8 Programmer dsPICDEM.net 1 Connectivity Development Adapter Kit (AC163021) .................................35 Board (DM300004-1) .............................................75 PIC10F2XX Universal Programmer dsPICDEM.net 2 Connectivity Development Adapter (AC163020) ......................................35 Board (DM300004-2) .............................................75 PICkit 1 Flash Starter Kit (DV164101) ....................................35 PIC18F4431 Plug-in Module (MA18F4431) ...........................74 PICkit 2 Microcontroller Programmer (PG164120) .................40 E PICkit 2 Starter Kit (DV164120) ..............................................40 PICSTART Plus Development Programmer Emulator Systems (DV003001) ............................................................34 MPLAB ICE 2000 Modular In-Circuit Emulator PICSTART Plus Development Programmer Flash Pod (ICE2000) .......................................................42 Reprogrammable Firmware MPLAB ICE 2000/4000 Ordering Information ........................45 Upgrade (UK003010) .............................................34 MPLAB ICE 2000/4000 Replacement Accessories ...............44 PICSTART Plus Programmer MPLAB ICE 4000 Modular In-Circuit Emulator 18-Pin DIP to 28-Pin QFN Adapter (AC164033) ............34 Pod (ICE4000) .......................................................43 28-Pin DIP to 28-Pin QFN Adapter (AC164031) ............34 H 40-Pin DIP to 44-Pin QFN Adapter (AC164034) ............34 Hardware 68-Pin PLCC Adapter Kit for PIC16C92X and Ethernet PICtail Daughter Board ............................................39 PIC17C75X (AC164024) ................................34 Ethernet PICtail Daughter Board (AC164121) .......................39 84-Pin PLCC Adapter Kit for PIC17C76X MPLAB ICD 2 Accessories (AC164027) ....................................................34 MPLAB ICD 2 14-Pin Header - 8-Pin DFN to 8-Pin DIP Adapter (AC164032) ................34 PIC16F638/636 (AC162057) .........................33 rfPIC Development Kit 1 (DV164102) .....................................36 MPLAB ICD 2 14-Pin Header - rfPIC Receiver Module - 315 MHz (AC164104) ......................36 PIC16F684 (AC162055) ................................33 rfPIC Receiver Module - 433.92 MHz (AC164103) .................36 MPLAB ICD 2 14-Pin Header - rfPIC Receiver Module - 5 Pack/315 MHz (AC164106) ..........36 PIC16F688 (AC162056) ................................33 rfPIC Receiver Module - 5 Pack/433.92 MHz MPLAB ICD 2 18-Pin Header - (AC164105) ............................................................36 PIC16F716 (AC162054) ................................33 rfPIC Transmitter Module - 315 MHz (AC164102) ..................36 MPLAB ICD 2 20-Pin Header - rfPIC Transmitter Module - 433.92 MHz (AC164101) .............36 PIC16C785 (AC162060) ................................33 Signal Analysis PICtail Daughter Board MPLAB ICD 2 8/14-Pin Header - PICkit 1 Flash Starter Firmware PIC16F505 (AC162059) ................................33 Upgrade Kit (UK164101) ................................38 MPLAB ICD 2 8-Pin Header - Signal Analysis PICtail Daughter Board PIC12F683 (AC162058) ................................33 (AC164120) ............................................................38 MPLAB ICD 2 Header Interface K Module (AC162051) .......................................33 PIC12F629/675 MPLAB ICD 2 Header KEELOQ Security ICs Evaluation Kit Interface Module (AC162050) ........................33 KEELOQ Security ICs Evaluation Kit II (DM303006) ................98 RS-232 and Power Supply Kit (AC162048) ...................33 Universal Programming Module (AC162049) ................33 DS30177T-page 142 © 2005 Microchip Technology Inc.

Index P dsPIC DSC Asymmetric Key Embedded Encryption PICmicro MCU Demo Boards and Kits Library Software License - 5K to Low-Power Solutions Demonstration Board 25K Units (SW300055-25K) ...................................19 (DM163026) ...........................................................67 dsPIC DSC Asymmetric Key Embedded Encryption PICDEM 1 Demonstration Board (DM163001) ......................52 Library Software License - Evaluation Copy PICDEM 17 Demonstration Board (DM173001) ....................52 (SW300055-EVAL) .................................................19 PICDEM 18R Demonstration Kit (DM163006) .......................55 dsPIC DSC Asymmetric Key Embedded Encryption PICDEM 2 Plus Demonstration Board (DM163022) ..............53 Library Software License - Up to PICDEM 3 Demonstration Board (DM163003) ......................52 5K Units (SW300055-5K) .......................................19 PICDEM 4 Demonstration Board (DM163014) ......................54 dsPIC DSC Symmetric Key Embedded Encryption PICDEM CAN-LIN 1 Demonstration Board Library Software License - 25K to (DM163007) ...........................................................64 100K Units (SW300050-100K) ...............................18 PICDEM CAN-LIN 2 Demonstration Board dsPIC DSC Symmetric Key Embedded Encryption (DM163011) ...........................................................64 Library Software License - 5K to PICDEM CAN-LIN 3 Demonstration Board 25K Units (SW300050-25K) ...................................18 (DM163015) ...........................................................64 dsPIC DSC Symmetric Key Embedded Encryption PICDEM FS USB Demonstration Board Library Software License - Evaluation Copy (DM163025) ...........................................................61 (SW300050-EVAL) .................................................18 PICDEM HPC Explorer Board (DM183022) ...........................59 dsPIC DSC Symmetric Key Embedded Encryption PICDEM LCD Demonstration Board (DM163028) .................62 Library Software License - Up to PICDEM LIN Demonstration Kit (DM163005) ........................65 5K Units (SW300050-5K) .......................................18 PICDEM MC Development Board (DM183011) .....................57 dsPIC30F Acoustic Echo Cancellation Library PICDEM MC LV Development Board (DM183021) ...............58 Accessory Kit (AC300030) .............................................17 PICDEM Mechatronics Demonstration Kit dsPIC30F Acoustic Echo Cancellation Library (DM163029) ...........................................................56 Software License - 25K to 100K Units PICDEM USB Demonstration Kit (DM163010) ......................60 (SW300060-100K) ..................................................17 PICDEM Z 2.4 GHz Demonstration Kit (DM163027-2) ..........63 dsPIC30F Acoustic Echo Cancellation Library PICDEM Z 2.4 GHz RF Card (AC163027-2) ..........................63 Software License - 5K to 25K Units PICDEM Z Motherboard (AC163027-1) .................................63 (SW300060-25K) ....................................................17 PICDEM.net Demonstration/Evaluation Board dsPIC30F Acoustic Echo Cancellation Library (DM163004-LT) ......................................................66 Software License - Evaluation Copy Programmer Systems (SW300060-EVAL) .................................................17 28-Pin QFN Adapter Kit for 18-Pin ZIF Socket dsPIC30F Acoustic Echo Cancellation Library (AC164033) ............................................................50 Software License - Up to 5K Units 28-Pin QFN Adapter Kit for 40-Pin ZIF Socket (SW300060-5K) ......................................................17 (AC164031) ............................................................50 dsPIC30F DSP Library (SW300022) ......................................11 44-Pin QFN Adapter Kit (AC164034) .....................................50 dsPIC30F Math Library (SW300020) ......................................12 68-Pin PLCC Adapter Kit (AC164024) ...................................50 dsPIC30F Noise Suppression Library 6-Pin SOT-23/8P DIP Programmer Adapter Accessory Kit (AC300030) .............................................16 (AC163020) ............................................................50 dsPIC30F Noise Suppression Library Software License - 84-Pin PLCC Adapter Kit (AC164027) ...................................50 25K to 100K Units (SW300040-100K) ....................16 8-Pin DFN Adapter Kit (AC164032) .......................................50 dsPIC30F Noise Suppression Library Software License - ICSP Socket Module (AC004004) ..........................................49 5K to 25K Units (SW300040-25K) ..........................16 MPLAB PM3 ICSP Cable (AC002021) ..................................50 dsPIC30F Noise Suppression Library Software License - MPLAB PM3 Universal Device Programmer Evaluation Copy (SW300040-EVAL) ......................16 (DV007004) ............................................................48 dsPIC30F Noise Suppression Library Software License - PRO MATE II Device Programmer Elastomeric Up to 5K Units (SW300040-5K) ..............................16 Connectors (AC004005) ........................................50 dsPIC30F Peripheral Library (SW300021) .............................13 PRO MATE II Device programmer to MPLAB PM3 dsPIC30F Speech Encoder/Decoder Library Software Socket Module Adapter (AC164350) .....................48 License - Evaluation Copy (SW300070-EVAL) ......20 S dsPIC30F Speech Encoder/Decoder Library Software License - Up to 100K Units (SW300070-100K) ......20 Software Tools dsPIC30F Speech Encoder/Decoder Library Software CMX-RTX for dsPIC30F Devices (SW300031) ......................24 License - Up to 25K Units (SW300070-25K) ..........20 CMX-Scheduler for dsPIC DSC Devices (SW300030) ..........25 dsPIC30F Speech Encoder/Decoder Library Software CMX-Tiny+ for dsPIC30F Devices (SW300032) ....................26 License - Up to 5K Units (SW300070-5K) ..............20 Digital Filter Design (SW300001) ...........................................22 dsPIC30F Speech Recognition Library Digital Filter Design Lite (SW300001-LT) ...............................22 Accessory Kit (AC300031) .............................................15 dsPIC DSC Asymmetric Key Embedded Encryption dsPIC30F Speech Recognition Library Software Library Software License - 25K to License - 25K to 100K Units (SW300012) ..............15 100K Units (SW300055-100K) ...............................19 dsPIC30F Speech Recognition Library Software License - 5K to 25K Units (SW300011) ..................15 © 2005 Microchip Technology Inc. DS30177T-page 143

Development Systems Ordering Guide dsPIC30F Speech Recognition Library Software License - Evaluation Copy (SW300010-EVAL) ................................................15 dsPIC30F Speech Recognition Library Software License - Up to 5K Units (SW300010) ...................15 dsPIC30F V.22bis Soft Modem Library (SW300002) .............14 dsPIC30F V.32bis Soft Modem Library Software License - 25K to 100K Units (SW300005) .............14 dsPIC30F V.32bis Soft Modem Library Software License - 5K to 25K Units (SW300004) .................14 dsPIC30F V.32bis Soft Modem Library Software License - Evaluation Copy (SW300003-EVAL) .....................14 dsPIC30F V.32bis Soft Modem Library Software License - Up to 5K Units (SW300003) ...................14 dsPICworks Data Analysis and DSP Software (SW300023) ...........................................................21 FilterLab Active Filter Software Design Tool ..........................27 KEELOQ Security ICs License CD (DS40038) ........................29 MPLAB C18 C Compiler (SW006011) .....................................9 MPLAB C30 C Compiler (SW006012) ...................................10 MPLAB IDE (SW007002) .........................................................6 Total Endurance Software Model ...........................................28 DS30177T-page 144 © 2005 Microchip Technology Inc.

Index NOTES: © 2005 Microchip Technology Inc. DS30177T-page 145

WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office Australia - Sydney India - Bangalore Austria - Weis 2355 West Chandler Blvd. Tel: 61-2-9868-6733 Tel: 91-80-2229-0061 Tel: 43-7242-2244-399 Chandler, AZ 85224-6199 Fax: 61-2-9868-6755 Fax: 91-80-2229-0062 Fax: 43-7242-2244-393 Tel: 480-792-7200 China - Beijing India - New Delhi Denmark - Ballerup Fax: 480-792-7277 Tel: 86-10-8528-2100 Tel: 91-11-5160-8631 Tel: 45-4450-2828 Technical Support: Fax: 86-10-8528-2104 Fax: 91-11-5160-8632 Fax: 45-4485-2829 http://support.microchip.com Web Address: China - Chengdu Japan - Kanagawa France - Massy www.microchip.com Tel: 86-28-8676-6200 Tel: 81-45-471- 6166 Tel: 33-1-69-53-63-20 Fax: 86-28-8676-6599 Fax: 81-45-471-6122 Fax: 33-1-69-30-90-79 Atlanta Alpharetta, GA China - Fuzhou Korea - Seoul Germany - Ismaning Tel: 770-640-0034 Tel: 86-591-8750-3506 Tel: 82-2-554-7200 Tel: 49-89-627-144-0 Fax: 770-640-0307 Fax: 86-591-8750-3521 Fax: 82-2-558-5932 or Fax: 49-89-627-144-44 China - Hong Kong SAR 82-2-558-5934 Italy - Milan Boston Westborough, MA Tel: 852-2401-1200 Malaysia - Penang Tel: 39-0331-742611 Tel: 774-760-0087 Fax: 852-2401-3431 Tel:011-604-646-8870 Fax: 39-0331-466781 Fax: 774-760-0088 China - Shanghai Fax:011-604-646-5086 Netherlands - Drunen Chicago Tel: 86-21-5407-5533 Philippines - Manila Tel: 31-416-690399 Itasca, IL Fax: 86-21-5407-5066 Tel: 011-632-634-9065 Fax: 31-416-690340 Tel: 630-285-0071 China - Shenyang Fax: 011-632-634-9069 England - Berkshire Fax: 630-285-0075 Tel: 86-24-2334-2829 Singapore Tel: 44-118-921-5869 Fax: 86-24-2334-2393 Fax: 44-118-921-5820 Dallas Tel: 65-6334-8870 Addison, TX China - Shenzhen Fax: 65-6334-8850 Tel: 972-818-7423 Tel: 86-755-8203-2660 Taiwan - Kaohsiung Fax: 972-818-2924 Fax: 86-755-8203-1760 Tel: 886-7-536-4818 Detroit China - Shunde Fax: 886-7-536-4803 Farmington Hills, MI Tel: 86-757-2839-5507 Taiwan - Taipei Tel: 248-538-2250 Fax: 86-757-2839-5571 Tel: 886-2-2500-6610 Fax: 248-538-2260 China - Qingdao Fax: 886-2-2508-0102 Kokomo Tel: 86-532-502-7355 Taiwan - Hsinchu Kokomo, IN Fax: 86-532-502-7205 Tel: 886-3-572-9526 Tel: 765-864-8360 Fax: 886-3-572-6459 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 San Jose Mountain View, CA Tel: 650-215-1444 Fax: 650-961-0286 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 04/20/05 DS30177T-page 146 © 2005 Microchip Technology Inc.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrochip: ACICE0207 ACICE0201 ACICE0203 AC002021 AC163020 ACICE0403 ACICE0106 AC162061 AC164033 AC163001