Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Overview The KEMET Aluminum Organic Capacitor (AO-CAP) Since there is no liquid electrolyte, the A700 offers long is a solid state aluminum capacitor. The cathode is a operational lifetimes, low ESR, and high operational conductive organic polymer, which results in very low ESR temperatures. The inherent low ESR renders the A700 and improved capacitance retention at high frequency. suitable for high ripple current handling. The small AO-CAPs may be operated at steady state voltages up to package size, high ripple current capability, high operating 100% of rated voltage without the need to de-rate. temperature, low parasistics, and high capacitance makes the A700 ideal for high performance microprocessor, FPGA, and ASIC decoupling designs. Benefits • ESR: 4.5 – 70 mΩ • Polymer cathode technology • High frequency capacitance retention • Non-ignition failure mode • 100% accelerated steady state aging • 100% surge current tested • Volumetric efficiency • Self-healing mechanism • EIA standard case sizes Applications Typical applications include DC/DC converters, notebook PCs, telecommunications, displays, and industrial applications. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information A 700 V 476 M 006 A T E018 Capacitor Case Capacitance Capacitance Rated Voltage Failure Rate/ Termination Packaging Series ESR Code Class Size Code (pF) Tolerance (VDC) Design Finish (C-Spec) A = 700 = D First two digits M = ±20% 002 = 2 A = N/A T = 100% E = ESR Blank = 7" Reel Aluminum Aluminum V represent 2R5 = 2.5 Matte Tin Last three 7280 = 13" Reel Polymer W significant 004 = 4 (Sn)-plated digits specify X figures. Third 006 = 6.3 ESR in mΩ digit specifies 008 = 8 (018 = 18 number of 010 = 10 mΩ) zeros. 12R = 12.5 016 = 16 025 = 25 Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 105°C/125°C (Refer to part number for maximum temperature rating) Rated Capacitance Range 6.8 – 560 µF at 120 Hz/25°C Capacitance Tolerance M Tolerance (20%) Rated Voltage Range 2 – 25 V DF (120 Hz) 6% ESR (100 kHz) Refer to Part Number Electrical Specification Table ≤ 4 V Rating: ≤ 0.06 CV (µA) at rated voltage after 5 minutes > 4 V Rating: ≤ 0.04 CV (µA) at rated voltage after 5 minutes If there is any concern about leakage current, please perform pre-conditioning to the part following below conditions: Leakage Current * Temperature: 105°C maximum * Voltage: Rated Voltage * Series Resistor: 1,000 Ω * Charge Time: 1 hour minimum * Measuring: Discharge the capacitor(s), store them for 4 to 24 hours at room temperature and RH ≤ 60% © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 22 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Qualification Test Condition Characteristics Δ C/C Within ±10%*4 of initial value DF ≤ initial limit Endurance 105°C/125°C*2 at rated voltage, 2,000 hours*3 DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Δ C/C Within ±10%*4 of initial value DF Within initial limits Storage Life 105°C/125°C*2 at 0 volts, 2,000 hours*3 DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Within −5/+30%*5 of initial value Δ C/C A700V477M002AT PN: −30%/+70% of 60°C, 90% RH, 1,000 hours, rated voltage 60°C, 90% RH, initial value Humidity 500 hours, no Load DF ≤ initial limit DCL Within 5.0 x initial limit +25°C −55°C +85°C +105°C/125°C Extreme temperature exposure at a Δ C/C IL*1 ±15% ±15% ±20% Temperature Stability succession of continuous steps at +25°C, −55°C, +85°C, +105°C/+125°C*2 DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL Δ C/C Within ±10%*4 of initial value 105°C / 125°C*2, 1.32 x rated voltage, DF Within initial limits Surge Voltage 33 Ω resistance, 1,000 cycles DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value MIL–STD–202, Method 213, Condition I, 100 G peak Mechanical Shock/ MIL–STD–202, Method 204, Condition D, DF Within initial limits Vibration 10 Hz to 2,000 Hz, 20 G peak DCL Within initial limits *1 IL = Initial Limit *2 Refer to part number specifications for individual temperature classification *3 PN A700V337M002AT test condition specification goes up to 1,000 hours *4 For PN's : A700V337M002AT & A700V477M002AT capacitance change is within ± 20 of intial value *5 For PN's : A700V337M002AT & A700V477M002AT capacitance change is within −30/+70% of intial value © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 33 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Electrical Characteristics ESR vs. Frequency Capacitance vs. Frequency 100 A700V686M006ATE018_Imp ms)10 A700D157M006ATE015_Imp h A700X187M006ATE010_Imp 100 O dance, ESR ( 1 AAA777000000VDX611885677MMM000000666AAATTTEEE000111805___EEESSSRRR citance (µF) mpe0.1 apa10 A700V686M006ATE018 I C A700D157M006ATE015 A700X187M006ATE010 0.01 0.001 1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) Frequency (Hz) Dimensions – Millimeters (Inches) Metric will govern SIDE VIEW END VIEW BOTTOM VIEW H F S S W L Typical Case Size Component Weight F ±0.1 S ±0.3 KEMET EIA L W H (mg) ±(0.004) ±(0.012) D 7343–31 7.3±0.3 4.3±0.3 2.8±0.3 2.4 1.3 196.58 (0.287±0.012) (0.169±0.012) (0.098±0.012) (0.094) (0.051) V 7343–20 7.3±0.3 4.3±0.3 2.0 (0.079) 2.4 1.3 132.72 (0.287±0.012) (0.169±0.012) Maximum* (0.094) (0.051) W 7343–15 7.3±0.3 4.3±0.3 1.4±0.1 2.4 1.3 305.03 (0.287±0.012) (0.169±0.012) (0.055±0.004) (0.094) (0.051) X 7343–43 7.3±0.3 4.3±0.3 4.0±0.3 2.4 1.3 305.03 (0.287±0.012) (0.169±0.012) (0.157±0.012) (0.094) (0.051) Notes: (Ref) – Dimensions provided for reference only. * Maximum Height is 2.1 for A700V477M002AT/A700V337M2R5AT © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 44 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference Ripple Maximum Rated Rated Case Code/ KEMET Part DC DF ESR Current MSL Operating Voltage Capacitance Case Size Number Leakage (rms) Temp. µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C 2 100 V/7343-20 A700V107M002ATE016 12 6 16 4,100 3 125 2 100 V/7343-20 A700V107M002ATE018 12 6 18 3,900 3 125 2 100 V/7343-20 A700V107M002ATE025 12 6 25 3,300 3 125 2 100 V/7343-20 A700V107M002ATE028 12 6 28 3,100 3 125 2 150 V/7343-20 A700V157M002ATE015 18 6 15 4,200 3 125 2 150 V/7343-20 A700V157M002ATE018 18 6 18 3,900 3 125 2 150 V/7343-20 A700V157M002ATE025 18 6 25 3,300 3 125 2 150 V/7343-20 A700V157M002ATE028 18 6 28 3,100 3 125 2 180 D/7343-31 A700D187M002ATE015 22 6 15 4,100 3 125 2 180 D/7343-31 A700D187M002ATE018 22 6 18 3,700 3 125 2 220 W/7343-15 A700W227M002ATE006 26 6 6 6,900 3 125 2 220 W/7343-15 A700W227M002ATE009 26 6 9 5,700 3 125 2 220 V/7343-20 A700V227M002ATE009 26 6 9 5,500 3 125 2 220 V/7343-20 A700V227M002ATE015 26 6 15 4,200 3 125 2 220 V/7343-20 A700V227M002ATE018 26 6 18 3,900 3 125 2 220 D/7343-31 A700D227M002ATE009 26 6 9 5,300 3 125 2 220 D/7343-31 A700D227M002ATE012 26 6 12 4,600 3 125 2 220 D/7343-31 A700D227M002ATE015 26 6 15 4,100 3 125 2 220 D/7343-31 A700D227M002ATE018 26 6 18 3,700 3 125 2 270 X/7343-43 A700X277M002ATE010 32 6 10 4,700 3 125 2 270 X/7343-43 A700X277M002ATE012 32 6 12 4,300 3 125 2 270 X/7343-43 A700X277M002ATE015 32 6 15 3,900 3 125 2 330 V/7343-20 A700V337M002ATE4R5 40 6 4.5 7,750 3 125 2 330 V/7343-20 A700V337M002ATE006 40 6 6 6,700 3 125 2 330 V/7343-20 A700V337M002ATE009 40 6 9 5,500 3 125 2 330 D/7343-31 A700D337M002ATE007 40 6 7 6,000 3 125 2 330 D/7343-31 A700D337M002ATE009 40 6 9 5,300 3 125 2 330 D/7343-31 A700D337M002ATE012 40 6 12 4,600 3 125 2 330 X/7343-43 A700X337M002ATE010 40 6 10 4,700 3 125 2 330 X/7343-43 A700X337M002ATE015 40 6 15 3,900 3 125 2 390 X/7343-43 A700X397M002ATE010 47 6 10 4,700 3 125 2 390 X/7343-43 A700X397M002ATE015 47 6 15 3,900 3 125 2 470 V/7343-21 A700V477M002ATE4R5 56 6 4.5 7,750 3 105 2 470 V/7343-21 A700V477M002ATE006 56 6 6 6,700 3 105 2 470 D/7343-31 A700D477M002ATE005 56 6 5 7,100 3 125 2 470 D/7343-31 A700D477M002ATE006 56 6 6 6,500 3 125 2 470 X/7343-43 A700X477M002ATE005 56 6 5 6,700 3 125 2 470 X/7343-43 A700X477M002ATE007 56 6 7 5,700 3 125 2 470 X/7343-43 A700X477M002ATE010 56 6 10 4,700 3 125 2 470 X/7343-43 A700X477M002ATE015 56 6 15 3,900 3 125 2 560 X/7343-43 A700X567M002ATE4R5 67 6 4.5 7,000 3 125 2 560 X/7343-43 A700X567M002ATE005 67 6 5 6,700 3 125 2 560 X/7343-43 A700X567M002ATE006 67 6 6 6,100 3 125 2 560 X/7343-43 A700X567M002ATE009 67 6 9 5,000 3 125 2.5 68 V/7343-20 A700V686M2R5ATE020 10 6 20 3,700 3 125 µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C Maximum Rated Rated Case Code/ DC KEMET Part Number DF ESR Ripple Current MSL Operating Voltage Capacitance Case Size Leakage Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 55 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Ripple Maximum Rated Rated Case Code/ KEMET Part DC DF ESR Current MSL Operating Voltage Capacitance Case Size Number Leakage (rms) Temp. µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C 2.5 68 V/7343-20 A700V686M2R5ATE028 10 6 28 3,100 3 125 2.5 82 V/7343-20 A700V826M2R5ATE018 12 6 18 3,900 3 125 2.5 82 V/7343-20 A700V826M2R5ATE025 12 6 25 3,300 3 125 2.5 82 V/7343-20 A700V826M2R5ATE028 12 6 28 3,100 3 125 2.5 100 D/7343-31 A700D107M2R5ATE018 15 6 18 3,700 3 125 2.5 100 D/7343-31 A700D107M2R5ATE025 15 6 25 3,200 3 125 2.5 100 D/7343-31 A700D107M2R5ATE028 15 6 28 3,000 3 125 2.5 120 D/7343-31 A700D127M2R5ATE015 18 6 15 4,100 3 125 2.5 120 D/7343-31 A700D127M2R5ATE018 18 6 18 3,700 3 125 2.5 150 D/7343-31 A700D157M2R5ATE015 23 6 15 4,100 3 125 2.5 150 D/7343-31 A700D157M2R5ATE018 23 6 18 3,700 3 125 2.5 180 D/7343-31 A700D187M2R5ATE015 27 6 15 4,100 3 125 2.5 180 D/7343-31 A700D187M2R5ATE018 27 6 18 3,700 3 125 2.5 180 X/7343-43 A700X187M2R5ATE010 27 6 10 4,700 3 125 2.5 180 X/7343-43 A700X187M2R5ATE015 27 6 15 3,900 3 125 2.5 180 X/7343-43 A700X187M2R5ATE018 27 6 18 3,500 3 125 2.5 220 W/7343-15 A700W227M2R5ATE006 33 6 6 6,900 3 125 2.5 220 W/7343-15 A700W227M2R5ATE009 33 6 9 5,700 3 125 2.5 220 X/7343-43 A700X227M2R5ATE009 33 6 9 5,000 3 125 2.5 220 X/7343-43 A700X227M2R5ATE010 33 6 10 4,700 3 125 2.5 220 X/7343-43 A700X227M2R5ATE015 33 6 15 3,900 3 125 2.5 330 V/7343-20 A700V337M2R5ATE4R5 50 6 4.5 7,750 3 125 2.5 330 V/7343-20 A700V337M2R5ATE006 50 6 6 6,700 3 125 2.5 330 V/7343-20 A700V337M2R5ATE009 50 6 9 5,500 3 125 2.5 330 X/7343-43 A700X337M2R5ATE010 50 6 10 4,700 3 125 2.5 330 X/7343-43 A700X337M2R5ATE015 50 6 15 3,900 3 125 2.5 470 X/7343-43 A700X477M2R5ATE005 70 6 5 6,700 3 125 2.5 470 X/7343-43 A700X477M2R5ATE007 70 6 7 5,700 3 125 2.5 470 X/7343-43 A700X477M2R5ATE010 70 6 10 4,700 3 125 2.5 470 X/7343-43 A700X477M2R5ATE015 70 6 15 3,900 3 125 2.5 560 X/7343-43 A700X567M2R5ATE4R5 84 6 4.5 7,000 3 125 2.5 560 X/7343-43 A700X567M2R5ATE006 84 6 6 6,100 3 125 2.5 560 X/7343-43 A700X567M2R5ATE009 84 6 9 5,000 3 125 4 68 V/7343-20 A700V686M004ATE020 16 6 20 3,700 3 125 4 68 V/7343-20 A700V686M004ATE028 16 6 28 3,100 3 125 4 82 V/7343-20 A700V826M004ATE016 20 6 16 4,100 3 125 4 82 V/7343-20 A700V826M004ATE018 20 6 18 3,900 3 125 4 82 V/7343-20 A700V826M004ATE025 20 6 25 3,300 3 125 4 82 V/7343-20 A700V826M004ATE028 20 6 28 3,100 3 125 4 100 D/7343-31 A700D107M004ATE018 24 6 18 3,700 3 125 4 100 D/7343-31 A700D107M004ATE025 24 6 25 3,200 3 125 4 100 D/7343-31 A700D107M004ATE028 24 6 28 3,000 3 125 4 100 V/7343-20 A700V107M004ATE025 24 6 25 3,300 3 125 4 100 V/7343-20 A700V107M004ATE028 24 6 28 3,100 3 125 4 120 D/7343-31 A700D127M004ATE015 29 6 15 4,100 3 125 µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C Maximum Rated Rated Case Code/ DC KEMET Part Number DF ESR Ripple Current MSL Operating Voltage Capacitance Case Size Leakage Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 66 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Ripple Maximum Rated Rated Case Code/ KEMET Part DC DF ESR Current MSL Operating Voltage Capacitance Case Size Number Leakage (rms) Temp. µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C 4 120 D/7343-31 A700D127M004ATE018 29 6 18 3,700 3 125 4 150 D/7343-31 A700D157M004ATE015 36 6 15 4,100 3 125 4 150 D/7343-31 A700D157M004ATE018 36 6 18 3,700 3 125 4 150 V/7343-20 A700V157M004ATE015 36 6 15 4,200 3 125 4 150 V/7343-20 A700V157M004ATE016 36 6 16 4,100 3 125 4 150 V/7343-20 A700V157M004ATE018 36 6 18 3,900 3 125 4 180 D/7343-31 A700D187M004ATE012 43 6 12 4,600 3 125 4 180 D/7343-31 A700D187M004ATE015 43 6 15 4,100 3 125 4 180 D/7343-31 A700D187M004ATE018 43 6 18 3,700 3 125 4 180 X/7343-43 A700X187M004ATE010 43 6 10 4,700 3 125 4 180 X/7343-43 A700X187M004ATE015 43 6 15 3,900 3 125 4 180 X/7343-43 A700X187M004ATE018 43 6 18 3,500 3 125 4 220 D/7343-31 A700D227M004ATE009 53 6 9 5,300 3 125 4 220 D/7343-31 A700D227M004ATE010 53 6 10 5,000 3 125 4 220 D/7343-31 A700D227M004ATE015 53 6 15 4,100 3 125 4 220 X/7343-43 A700X227M004ATE009 53 6 9 5,000 3 125 4 220 X/7343-43 A700X227M004ATE010 53 6 10 4,700 3 125 4 220 X/7343-43 A700X227M004ATE015 53 6 15 3,900 3 125 4 270 X/7343-43 A700X277M004ATE010 65 6 10 4,700 3 125 4 270 X/7343-43 A700X277M004ATE015 65 6 15 3,900 3 125 4 330 X/7343-43 A700X337M004ATE008 79 6 8 5,300 3 125 4 330 X/7343-43 A700X337M004ATE010 79 6 10 4,700 3 125 4 330 X/7343-43 A700X337M004ATE015 79 6 15 3,900 3 125 6.3 10 V/7343-20 A700V106M006ATE055 3 6 55 2,200 3 125 6.3 22 V/7343-20 A700V226M006ATE028 6 6 28 3,100 3 125 6.3 22 V/7343-20 A700V226M006ATE045 6 6 45 2,400 3 125 6.3 33 V/7343-20 A700V336M006ATE018 8 6 18 3,900 3 125 6.3 33 V/7343-20 A700V336M006ATE025 8 6 25 3,300 3 125 6.3 33 V/7343-20 A700V336M006ATE028 8 6 28 3,100 3 125 6.3 47 V/7343-20 A700V476M006ATE018 12 6 18 3,900 3 125 6.3 47 V/7343-20 A700V476M006ATE025 12 6 25 3,300 3 125 6.3 47 V/7343-20 A700V476M006ATE028 12 6 28 3,100 3 125 6.3 56 V/7343-20 A700V566M006ATE018 14 6 18 3,900 3 125 6.3 56 V/7343-20 A700V566M006ATE025 14 6 25 3,300 3 125 6.3 56 V/7343-20 A700V566M006ATE028 14 6 28 3,100 3 125 6.3 68 V/7343-20 A700V686M006ATE015 17 6 15 4,200 3 125 6.3 68 V/7343-20 A700V686M006ATE018 17 6 18 3,900 3 125 6.3 68 V/7343-20 A700V686M006ATE025 17 6 25 3,300 3 125 6.3 68 V/7343-20 A700V686M006ATE028 17 6 28 3,100 3 125 6.3 82 V/7343-20 A700V826M006ATE018 21 6 18 3,900 3 125 6.3 82 V/7343-20 A700V826M006ATE025 21 6 25 3,300 3 125 6.3 82 V/7343-20 A700V826M006ATE028 21 6 28 3,100 3 125 6.3 100 V/7343-20 A700V107M006ATE015 25 6 15 4,200 3 125 6.3 100 V/7343-20 A700V107M006ATE018 25 6 18 3,900 3 125 6.3 100 V/7343-20 A700V107M006ATE025 25 6 25 3,300 3 125 µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C Maximum Rated Rated Case Code/ DC KEMET Part Number DF ESR Ripple Current MSL Operating Voltage Capacitance Case Size Leakage Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 77 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Ripple Maximum Rated Rated Case Code/ KEMET Part DC DF ESR Current MSL Operating Voltage Capacitance Case Size Number Leakage (rms) Temp. µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C 6.3 100 D/7343-31 A700D107M006ATE015 25 6 15 4,100 3 125 6.3 100 D/7343-31 A700D107M006ATE018 25 6 18 3,700 3 125 6.3 120 D/7343-31 A700D127M006ATE012 30 6 12 4,600 3 125 6.3 120 D/7343-31 A700D127M006ATE015 30 6 15 4,100 3 125 6.3 120 D/7343-31 A700D127M006ATE018 30 6 18 3,700 3 125 6.3 150 D/7343-31 A700D157M006ATE010 38 6 10 5,000 3 125 6.3 150 D/7343-31 A700D157M006ATE012 38 6 12 4,600 3 125 6.3 150 D/7343-31 A700D157M006ATE015 38 6 15 4,100 3 125 6.3 150 X/7343-43 A700X157M006ATE010 38 6 10 4,700 3 125 6.3 150 X/7343-43 A700X157M006ATE012 38 6 12 4,300 3 125 6.3 150 X/7343-43 A700X157M006ATE015 38 6 15 3,900 3 125 6.3 180 D/7343-31 A700D187M006ATE010 45 6 10 5,000 3 125 6.3 180 D/7343-31 A700D187M006ATE015 45 6 15 4,100 3 125 6.3 180 X/7343-43 A700X187M006ATE010 45 6 10 4,700 3 125 6.3 180 X/7343-43 A700X187M006ATE015 45 6 15 3,900 3 125 6.3 220 X/7343-43 A700X227M006ATE007 55 6 7 5,700 3 125 6.3 220 X/7343-43 A700X227M006ATE010 55 6 10 4,700 3 125 6.3 220 X/7343-43 A700X227M006ATE015 55 6 15 3,900 3 125 8 10 V/7343-20 A700V106M008ATE055 3 6 55 2,200 3 125 8 22 V/7343-20 A700V226M008ATE028 7 6 28 3,100 3 125 8 22 V/7343-20 A700V226M008ATE045 7 6 45 2,400 3 125 8 33 V/7343-20 A700V336M008ATE018 11 6 18 3,900 3 125 8 33 V/7343-20 A700V336M008ATE025 11 6 25 3,300 3 125 8 33 V/7343-20 A700V336M008ATE028 11 6 28 3,100 3 125 8 56 D/7343-31 A700D566M008ATE015 18 6 15 4,100 3 125 8 56 D/7343-31 A700D566M008ATE018 18 6 18 3,700 3 125 8 68 D/7343-31 A700D686M008ATE015 22 6 15 4,100 3 125 8 68 D/7343-31 A700D686M008ATE018 22 6 18 3,700 3 125 8 100 X/7343-43 A700X107M008ATE010 32 6 10 4,700 3 125 8 100 X/7343-43 A700X107M008ATE012 32 6 12 4,300 3 125 8 100 X/7343-43 A700X107M008ATE015 32 6 15 3,900 3 125 10 10 V/7343-20 A700V106M010ATE055 4 6 55 2,200 3 125 10 22 V/7343-20 A700V226M010ATE028 9 6 28 3,100 3 125 10 22 V/7343-20 A700V226M010ATE045 9 6 45 2,400 3 125 10 33 V/7343-20 A700V336M010ATE018 13 6 18 3,900 3 125 10 33 V/7343-20 A700V336M010ATE025 13 6 25 3,300 3 125 10 33 V/7343-20 A700V336M010ATE028 13 6 28 3,100 3 125 10 47 V/7343-20 A700V476M010ATE025 19 6 25 3,300 3 125 10 47 V/7343-20 A700V476M010ATE028 19 6 28 3,100 3 125 10 56 D/7343-31 A700D566M010ATE015 22 6 15 4,100 3 125 10 56 D/7343-31 A700D566M010ATE018 22 6 18 3,700 3 125 10 68 D/7343-31 A700D686M010ATE015 27 6 15 4,100 3 125 10 68 D/7343-31 A700D686M010ATE018 27 6 18 3,700 3 125 10 100 X/7343-43 A700X107M010ATE010 40 6 10 4,700 3 125 10 100 X/7343-43 A700X107M010ATE015 40 6 15 3,900 3 125 µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C Maximum Rated Rated Case Code/ DC KEMET Part Number DF ESR Ripple Current MSL Operating Voltage Capacitance Case Size Leakage Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 88 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Table 1 – Ratings & Part Number Reference cont. Ripple Maximum Rated Rated Case Code/ KEMET Part DC DF ESR Current MSL Operating Voltage Capacitance Case Size Number Leakage (rms) Temp. µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C 10 120 X/7343-43 A700X127M010ATE010 48 6 10 4,700 3 125 10 120 X/7343-43 A700X127M010ATE015 48 6 15 3,900 3 125 10 150 X/7343-43 A700X157M010ATE010 60 6 10 4,700 3 125 10 150 X/7343-43 A700X157M010ATE015 60 6 15 3,900 3 125 12.5 10 V/7343-20 A700V106M12RATE040 5 6 40 2,600 3 125 12.5 10 V/7343-20 A700V106M12RATE055 5 6 55 2,200 3 125 12.5 10 V/7343-20 A700V106M12RATE060 5 6 60 2,100 3 125 12.5 15 V/7343-20 A700V156M12RATE040 8 6 40 2,600 3 125 12.5 15 V/7343-20 A700V156M12RATE045 8 6 45 2,400 3 125 12.5 22 V/7343-20 A700V226M12RATE030 11 6 30 3,000 3 125 12.5 33 V/7343-20 A700V336M12RATE025 17 6 25 3,300 3 125 12.5 56 D/7343-31 A700D566M12RATE020 28 6 20 3,500 3 125 12.5 47 D/7343-31 A700D476M12RATE020 24 6 20 3,500 3 125 12.5 47 D/7343-31 A700D476M12RATE025 24 6 25 3,200 3 125 12.5 100 X/7343-43 A700X107M12RATE012 50 6 12 4,300 3 125 12.5 100 X/7343-43 A700X107M12RATE015 50 6 15 3,900 3 125 16 6.8 V/7343-20 A700V685M016ATE070 4 6 70 2,000 3 125 16 8.2 V/7343-20 A700V825M016ATE045 5 6 45 2,400 3 125 16 10 V/7343-20 A700V106M016ATE045 6 6 45 2,400 3 125 16 10 V/7343-20 A700V106M016ATE060 6 6 60 2,100 3 125 16 15 V/7343-20 A700V156M016ATE040 10 6 40 2,600 3 125 16 22 D/7343-31 A700D226M016ATE018 14 6 18 3,700 3 125 16 22 D/7343-31 A700D226M016ATE025 14 6 25 3,200 3 125 16 22 D/7343-31 A700D226M016ATE030 14 6 30 2,900 3 125 25 15 V/7343-20 A700V156M025ATE040 15 6 40 2,600 3 125 µA at +25°C % at +25°C mΩ at 25°C mA at 100 kHz (See below for Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz with/T = +20°C at °C part options) ≤ 260°C 5 Minutes Maximum Maximum −55°C to 125°C Maximum Rated Rated Case Code/ DC KEMET Part Number DF ESR Ripple Current MSL Operating Voltage Capacitance Case Size Leakage Temp. Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 99 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Derating Guidelines Maximum Maximum Recommended Recommended Voltage Rating Steady State Transient Voltage Voltage (1 ms – 1 µs) −55°C to 125°C 2 – 25 V V V R R V = Rated Voltage R Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits Power capability is determined based on a 20°C temperature rise. A higher temperature rise and therefore higher power capability is allowable as long as the ambient temperature plus temperature rise due to ripple current does not exceed the rated temperature of the part. The maximum power dissipation by case size can be determined using the below table. Maximum Power KEMET Series EIA Dissipation (Pmax) and Case Code Case Code mWatts at 25°C with +20°C Rise A700W 7343-15 290 A700V 7343-20 270 A700D 7343-31 250 A700X 7343-43 225 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax/R E(max) = Z √Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (Ohms) Refer to part number listings for permittable Arms limits. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1100 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Reverse Voltage Polymer aluminum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a certain degree of transient voltage reversal for short periods as shown in the below table. Please note that these parts may not be operated continuously in reverse, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 60% of Rated Voltage 55°C 50% of Rated Voltage 85°C 40% of Rated Voltage 125°C 30% of Rated Voltage Table 2 – Land Dimensions/Courtyard Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 V 7343–20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 W 7343–15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1111 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Soldering Process KEMET’s families of surface mount capacitors are Profile Feature SnPb Assembly Pb-Free Assembly compatible with wave (single or dual), convection, IR, Preheat/Soak or vapor phase reflow techniques. Preheating of these Temperature Minimum components is recommended to avoid extreme thermal (T ) 100°C 150°C TemperaturSem inMaximum stress. KEMET's recommended profile conditions for 150°C 200°C (T ) Smax convection and IR reflow reflect the profile conditions of the Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds s smin smax IPC/J–STD–020D standard for moisture sensitivity testing. Ramp-up Rate (T to T) 3°C/seconds maximum 3°C/seconds maximum L P The devices can safely withstand a maximum of three reflow Liquidous Temperature (T) 183°C 217°C L passes at these conditions. Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Please note that although the X/7343–43 case size can Time within 5°C withstand wave soldering, the tall profile (4.3 mm maximum) of Maximum Peak 20 seconds maximum 30 seconds maximum Temperature (t) dictates care in wave process development. Ramp-down Rate (TP to T) 6°C/seconds maximum 6°C/seconds maximum P L Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Hand soldering should be performed with care due to the Note: All temperatures refer to the center of the package, measured on the difficulty in process control. If performed, care should be package body surface that is facing up during assembly reflow. taken to avoid contact of the soldering iron to the molded * For Case Size height > 2.5 mm case. The iron should be used to heat the solder pad, ** For Case Size height ≤ 2.5 mm applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be T P t Maximum Ramp-up Rate = 3°C/second P removed immediately. “Wiping” the edges of a chip and Maximum Ramp-down Rate = 6°C/second T heating the top surface is not recommended. e L tL r u rat Tsmax e p m T e smin t T s 25 25°C to Peak Time Storage All AO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per IPC/JEDEC J–STD–033. MSL3 specifies a floor time of 168H at 30°C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH. If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1122 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Construction Molded Epoxy Polarity Stripe (+) Detailed Element Layer View Case Silver Polymer (Third Layer) (First Layer) Leadframe (− Cathode) Carbon (Second Layer) Aluminum Leadframe Silver Epoxy (+ Anode) Molded Epoxy Case Capacitor Marking KEMET Polarity Date Code * Aluminum Indicator (+) Polymer 1st digit = Last number of Year 5 = 2015 6 = 2016 Picofarad 7 = 2017 Code 8 = 2018 9 =2019 Rated KEMET 0 = 2020 Voltage ID 2nd and 3rd digit = Week of the 01 = 1st week of the Year to Year 52 = 52nd week of the Year Date Code* * 913 = 13th week of 2019 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1133 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only Embossed carrier (+) (−) Embossment Top tape thickness 0.10 mm (0.004”) 8 mm (0.315”) or 180 mm (7.0”) or maximum thickness 12 mm (0.472”) 330 mm (13.”) Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA P 2012-10 8 3,000 N/A R 2012-12 8 2,500 10,000 I 3216-10 8 3,000 N/A S 3216-12 8 2,500 10,000 A 3216-18 8 2,000 N/A T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 B 3528-21 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 C 6032-28 12 500 3,000 Q 7343-12 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-19 12 1,000 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 J 7360-15 12 1,000 3,000 H 7360-20 12 1,000 3,000 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1144 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P 2 T2 ØD0 P0 t(o1l0e rpaintcchee osn c tuampuel a±0ti.v2e mm) E1 A 0 F K 0 W B1 B0 E2 S P 1 1 T1 Center Lines of Cavity ØD Embossment 1 For cavity size, Cover Tape see Note 1, Table 4 B is for tape feeder reference only, 1 including draft concentric about B0. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum T Tape Size D 1 E P P 1 T Maximum 1 0 Note 1 1 0 2 Note 2 Note 3 Maximum 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/−0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 (0.059 +0.004/−0.0) (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) (0.004) 1.5 30 12 mm (0.059) (1.181) Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A, B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) (0.098) (0.327) Single (4 mm) 2.0 ±0.05 (0.079 ±0.002) or Note 5 8.2 10.25 5.5 ±0.05 4.6 12.3 12 mm and Double 4.0 ±0.10 (0.157 ±0.004) or (0.323) (0.404) (0.217 ±0.002) (0.181) (0.484) (8 mm) 8.0 ±0.10 (0.315 ±0.004) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1155 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8, 12 20 Bo Tape Maximum Width (mm) Rotation ( °) S 8, 12 20 Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 0.5 mm maximum Bending R R Radius © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1166 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Figure 5 – Reel Dimensions W Full Radius, (Includes Access Hole at 3 See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W (Measured at hub) 2 A D (See Note) N C (Arbor hole W (Measured at hub) diameter) 1 If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/−0.2 20.2 or (0.059) (0.521 +0.02/−0.008) (0.795) 12 mm 330 ±0.20 (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/−0.0 14.4 8 mm 50 (0.331 +0.059/−0.0) (0.567) Shall accommodate tape (1.969) 12.4 +2.0/−0.0 18.4 width without interference 12 mm (0.488 +0.078/−0.0) (0.724) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1177 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm minimum Leader Trailer Components 400 mm minimum 160 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1188 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 – 25 VDC KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2020_A700 • 11/25/2019 1199 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: A700V336M010ATE028 A700X337M2R5ATE010 A700V107M002ATE018 A700V336M010ATE025 A700X477M002ATE015 A700X107M008ATE010 A700V686M006ATE028 A700V157M002ATE025 A700D566M010ATE018 A700D107M006ATE015 A700X157M006ATE015 A700V476M006ATE025 A700D566M008ATE015 A700X227M004ATE010 A700V226M006ATE028 A700V336M008ATE028 A700D227M002ATE015 A700D187M2R5ATE015 A700V336M008ATE025 A700D187M002ATE018 A700D187M004ATE018 A700X127M010ATE015 A700D187M002ATE015 A700D187M004ATE015 A700V566M006ATE025 A700D157M2R5ATE015 A700D127M004ATE015 A700D127M006ATE015 A700D127M006ATE018 A700V127M002ATE025 A700V476M006ATE018 A700X107M010ATE015 A700V826M006ATE028 A700D686M008ATE018 A700D566M008ATE018 A700D686M010ATE018 A700V826M2R5ATE025 A700D686M008ATE015 A700V566M006ATE028 A700V826M2R5ATE018 A700X157M006ATE010 A700V686M006ATE025 A700X127M010ATE010 A700X277M002ATE010 A700X277M004ATE010 A700X477M002ATE010 A700V826M004ATE028 A700V226M006ATE045 A700D157M004ATE015 A700X397M002ATE015 A700D157M2R5ATE018 A700V157M002ATE028 A700V826M2R5ATE028 A700X157M010ATE010 A700V686M006ATE018 A700V107M002ATE025 A700X157M010ATE015 A700X227M004ATE015 A700D127M006ATE012 A700D107M006ATE018 A700V336M006ATE028 A700V226M008ATE028 A700X227M2R5ATE015 A700V476M006ATE028 A700V226M008ATE045 A700X227M2R5ATE010 A700V107M002ATE028 A700X337M2R5ATE015 A700V226M010ATE028 A700D187M2R5ATE018 A700V127M002ATE028 A700V336M006ATE025 A700D686M010ATE015 A700V826M006ATE025 A700V826M004ATE025 A700V566M006ATE018 A700X187M004ATE010 A700X187M006ATE010 A700X107M008ATE015 A700V157M002ATE018 A700X107M010ATE010 A700V336M008ATE018 A700X187M006ATE015 A700V826M006ATE018 A700V826M004ATE018 A700D227M002ATE012 A700V336M010ATE018 A700X397M002ATE010 A700X277M002ATE015 A700X277M004ATE015 A700D127M004ATE018 A700V336M006ATE018 A700D566M010ATE015 A700X337M002ATE015 A700X337M004ATE015 A700D157M004ATE018 A700V127M002ATE018 A700D227M002ATE018 A700X337M004ATE010 A700X337M002ATE010