Card Edge Connectors Catalog 1654080 Issued 7-03

Card Edge Connectors Introduction To assist you in the selec- ular printed circuit board The Tyco Electronics tion of the appropriate con- connector family are products presented in this This catalog contains nector for your application, provided at the beginning catalog are designed and product descriptions of a selection guide is provid- of that section. Various manufactured according AMP Card Edge Connectors. ed at the beginning of each technical documents are to the highest possible These connectors are pre- section. See the Table of referenced in the connector standards of quality and sented in three groups: Contents on the following family sections and are list- craftsmanship. They offer Solder Type Board-to- page for the exact location. ed and described at the optimum reliability at the Board, Press-fit Board-to- rear of this catalog. lowest possible cost. Board, and Wire-to-Board A comprehensive descrip- connectors. tion and features of a partic- Need more information? Dimensioning: Dimensions are in inches and millimeters Call Technical Support at unless specified otherwise. Values in the numbers listed at the brackets are metric equivalents. Metric symbols used are: bottom of the catalog m (meter) pages. mm (millimeter) mm2 (square millimeter) kg (kilogram) Technical Support is staffed C (Celsius) with specialists well versed N (newton) in Tyco Electronics prod- ucts. They can provide you Note:Dimensions in this catalog are for reference purposes only. Customer with: drawings are available upon request. nTechnical Support nCatalogs © Copyright 1992, 1996 and 2002 by Tyco Electronics. All Rights Reserved. nTechnical Documents nProduct Samples AMP, ACTION PIN, AMP-DURAGOLD, nTyco Electronics AMP-LEAF, AMP-O-LECTRIC, Authorized Distributor AMP-O-MATIC, AMPOMATOR, Locations AMP PACE, CERTI-CRIMP, DUO-TYNE, ECONOMATE, TELEDENSITY, and TYCO are trademarks. Other products, logos, and company names mentioned herein may be trade- marks of their respective owners. Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request 2 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Table of Contents Solder Type Board-to-Board Connectors Introduction………………………………………………………………………………………2 Selection Guide ………………………………………………………………………………4-6 Standard Edge Series Connectors Standard Edge .050 PCI Card Edge Connectors ………………………………………7-10 Standard Edge .050 Series Connectors ………………………………………………11-14 Standard Edge IIConnectors ……………………………………………………………15-27 Cantilever Beam Dip Solder Tails Overview……………………………………………………28 .100" [2.54] Centerline ……………………………………………………………………29-34 .125" [3.18] Centerline ……………………………………………………………………35-37 .156" [3.96] Centerline ……………………………………………………………………38-40 Modified Bellows Contact Overview ……………………………………………………………41 .100" [2.54] Centerline ……………………………………………………………………42-47 .125" [3.18] Centerline ……………………………………………………………………48-52 .156" [3.96] Centerline ……………………………………………………………………53-56 Polarization Keys ………………………………………………………………………………57 Standard Daughter Card Layout…………………………………………………………………57 Low Profile Connectors ……………………………………………………………………58-63 Twin Leaf Mother Board Connectors ………………………………………………………64-72 Rotary Cam ZIF Connectors …………………………………………………………………73-82 Linear ZIF Connectors ………………………………………………………………………83-96 Press-Fit Board-to-Board Connectors ACTION PINPress-Fit Contacts ……………………………………………………………97 AMP PACEConnectors …………………………………………………………………98-115 TELEDENSITYConnectors ……………………………………………………………116-118 ECONOMATEConnectors ……………………………………………………………119-126 Cantilever Beam Press-Fit Connectors Overview ……………………………………………127 .050" [1.27] High Density………………………………………………………………128-129 .100" [2.54] Centerline …………………………………………………………………130-140 .125" [3.18] Centerline …………………………………………………………………141-144 .156" [3.96] Centerline …………………………………………………………………145-148 Application Tooling ……………………………………………………………………149-151 Wire-to-Board Connectors Introduction …………………………………………………………………………………152 Selection Guide………………………………………………………………………………153 Crimp Snap Twin Leaf Connectors …………………………………………………154-163 AMP-LEAF Connectors…………………………………………………………………164-172 High Current Connectors………………………………………………………………173-176 DUO-TYNE Flag Connectors …………………………………………………………177-180 Printed Circuit Board Connector Hood Assemblies ………………………………181-183 Application Tooling ……………………………………………………………………184,185 Technical Documents ……………………………………………………………………186,187 Part Number Index ………………………………………………………………………188-201 Tyco Electronics Related Product Information ………………………………………………202 3 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Selection Guide, Board-to-Board Connectors Introduction Board-to-board (mother/ Board-to-board connectors daughter board) connectors come in a range of contact are ideally suited to back- centerline spacings of .050 plane wiring or any other [1.27] to .156 [3.96]. A wide application requiring the range of dual position sizes circuit connection of one and post styles are avail- printed circuit board to able. One family of connec- another. Designed to tors features zero insertion shorten manufacturing time force of the daughter and reduce applied costs, board, along with a choice these one-step, pre-assem- of actuating devices. A vari- bled connectors are ready ety of housing and contact for mounting and mass materials further expands insertion. the choice of connectors available to meet many Many of the connectors are application requirements. available with the proven and reliable ACTION PIN To help in choosing a con- contact. This unique con- nector for your application, tact has superior electrical a Selection Guide is provid- and physical characteristics ed on pages 4 through 6. that are top of the line in the industry. Standard Edge .050 Series Standard Edge Standard Edge II Connectors PCI Connectors .050 Series Connectors (.100 and .125 Centerline) (Pages 7-10) (Pages 11-14) (Pages 15-27) .350 [8.89] .368 [9.35] .155 .300 .300 [3.94] [7.62] [7.62] [1.56.1409] [1.651.409] [1.56.1409] .170±.020 [4.32±0.51] .170±.020 .315 [4.32±0.51] [8.00] Centerlines .050 [1.27] X X .100 [2.54] X .125 [3.18] X .150 [3.81] .156 [3.96] Tail Styles Solder X X X Right-Angle Solder X Wrap-Type X Card Extender X Solder Eyelet Press-Fit Surface-Mount 4 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Selection Guide, Board-to-Board Connectors (Continued) Standard Edge II Cantilever Beam Connectors Cantilever Beam Connectors (.150 Centerline) Standard Housing Connectors Scoop Housing (Pages 15-27) (Pages 28-40) (Pages 28-40) .054–.070 [1.37-1.78] .370 .390 [9.40] [9.91] .145 [1.0.1445] [0.0.3135] [3.68] .[0.5210±±..2051]0 [.10.5347 ttoo 1.0.8701] .008 .365 [.203] .300 [9.27] .610 [7.62] .705 [15.49] [17.91] .200±.020 [5.08±0.51] .395 or .510 [10.03 or 12.95] .135±.020 .015 [3.43±0.51] [0.41] .200 [.508] Centerlines .050 [1.27] .0625 [1.588] X X .100 [2.54] X X .125 [3.18] X .150 [3.81] X X .156 [3.96] Tail Styles X X X Solder Right-Angle Solder Wrap-Type Card Extender Solder Eyelet X X Press-Fit Surface-Mount Modified Bellows Connector Low Profile Twin Leaf (Pages 41-56) Connectors Mother Board Connectors (Pages 58-63) (Pages 64-72) .368 [9.35] .054-.071 .437 [1.37-1.80] .125 [11.10] [1.400.106] .300 [3.18] .610 [7.62] .150 [15.49] .460 [3.81] [11.68] .610 [15.49] .165 [4.19] .235 [5.97] .200 [5.08] .025 [.63] Centerlines .050 [1.27] X X .100 [2.54] X X X .125 [3.18] X .150 [3.81] X X X .156 [3.96] Tail Styles X X X Solder X Right-Angle Solder X Wrap-Type Card Extender X Solder Eyelet Press-Fit Surface-Mount 5 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Selection Guide, Board-to-Board Connectors (Continued) Rotary Cam ZIF Linear ZIF AMP PACE Connectors, Connectors Connectors Card Scoop Housing (Pages 73-82) (Pages 83-96) (Pages 98-115) .140 .475 [12.07] [3.56] .450 [11.43] A .150 .440 [3.81] [11.18] .845 [21.46] .234 .815 [20.70] [5.94] .645 [16.38] .848 [21.54] .598 .490 [12.45] [15.19] .460 [11.68] .370 [9.40] .345 [8.76] .130 [3.30] .100 x .200 = .390[9.91] A .125 x .125 = .420[10.67] .125 x .200 = .420[10.67] Centerlines .050 [1.27] .0625 [1.588] .100 [2.54] X X X .125 [3.18] X X X .150 [3.81] .156 [3.96] X Tail Styles Solder X X Right-Angle Solder X Wrap-Type X X X Card Extender Solder Eyelet Press-Fit X X Surface-Mount AMP PACE Connectors, ECONOMATE High Density Press Fit Standard Housing Connectors Connector (Pages 98-115) (Pages 119-126) For .093 Cards (Pages 128-129) .400 A [10.16] .234 [5.94] .066 [1.68] .545 .415 [13.84] [10.54] .181 .545 [4.60] [13.84] .610 [15.49] .421 .461 .130 [10.69][11.71] [3.30] .100 x .100 = .380[9.65] .100 x .200 = .360[9.14] A .125 x .250 = .410[10.41] .156 x .200 = .360[9.14] Centerlines .050 [1.27] X .0625 [1.588] .100 [2.54] X X .125 [3.18] X .150 [3.81] .156 [3.96] X X Tail Styles Solder Right-Angle Solder Wrap-Type X Card Extender Solder Eyelet Press-Fit X X X Surface-Mount 6 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors Product Facts n High density .050 [1.27] centerline contact spacing n Easy mating of high circuit count daughter boards n Polarizing web for positive board-to-connector registration n Choice of plastic pylons or metal holddowns Connectors that support A key differentiates the sig- Performance Specifications: PCIexpansion cards are naling environment voltages. Durability—Tested to 100 mating derived from those on the The same physical connec- cycles MicroChannel Architecture tor is used for the 32 bit sig- Mating Force—8 oz [2.22 N] max. per (MCA) bus. The MCA con- naling environments. In one contact pair nectors are well defined orientation, the key accepts Unmating Force—.5 oz [0.14 N] min. and have proven value and 5 volt boards. When rotated per contact pair reliability. 180°, the connector Contact Resistance—20 milliohms There are four connectors accepts 3.3 volt signaling max. (initial) 30 milliohms max. (final) that can be used depend- boards. The pin numbering Insulation Resistance— ing upon the PCI implemen- of the connector changes 1000 megohms min. tation. The differences for the different signaling Dielectric Withstanding Voltage— between these connectors environments to maintain 500 VAC (at sea level) are 32 bit and 64 bit, and the same relative position of Capacitance—2 picofarads max. the 5 volt and 3.3 volt sig- signals on the connector. Current Rating—1 ampere max. naling environments. PCI-X Voltage Rating—203 VAC is a version of PCI at 133 Thermal Shock— MHz which is under devel- –55°C to +85°C for 5 cycles opment and employs stan- Mixed Flowing Gas—Class II with dard PCI connectors. PCI-X mated board for 20 days is limited to 1 slot versus 4 slots of PCI. Technical Documents: Product Specification 108-14034 Application Specification 114-26012 Qualification Test Report 501-203 7 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors 64 Bit, 5 Volt Signaling Plastic Pylons 92 Dual Positions .350 with 3 Plastic Pylons or [8.89] 3 Metal Holddowns 5.040 [128.02] Material and Finish: Housing—High temperature thermo- .035 plastic 94V-0 rated, white [0.89] 35° .300 Contacts—Phosphor bronze, plated as L (2 Plcs.) (2 Plcs.) [7.62] follows: Plating B—Duplex plated .000015 [0.00038] min. gold in contact area, .610 [15.49] .000100 [0.00254] min. tin-lead on solder .170±.020 tails, with entire contact underplated [4.32±0.51] .000050 [0.00127] min. nickel Plating C—Duplex plated .000030 .060 .075 [.000.000100706 []0 m.0i0n2. 5g4o]l dm inin c. otinnt-alecat da roena, solder W[±±.00.1205] L See Note. (2[1 P.9lc0s].) [.31.5801] [T1.y5p2.] [.31.5801] [1.0.2570]Solder Tail CL tails, with entire contact underplated Typ. .050 10 Spaces 31 Spaces (2 Plcs.) (2 Plcs.) .000050 [0.00127] min. nickel 48 Spaces at [1.27] .050 .050 at at [1.27] [1.27] Section L-L Related Product Data: Performance Specifications— page 7 Technical Documents: Product Specification 108-14034 Metal Holddowns Through Surface Application Specification Hole Mount 114-26012 [0.0.8395] 35° .170±.020 L (2 Plcs.) (2 Plcs.) [4.32±0.51] .300 .300 [7.62] [7.62] .610 [15.49] .078 .17+.02 [1.98] See Note. Ref. .003 [4.318+.508] [.076] .180 W[±±.00.1205] L (2[.1 0P.79lc50s].) [.31.5801] [1.T0.y56p20.] (2[.3 1P.58lc01s].) (2[ 1.P0.25lc70s].)SToalidl eCLr .180 [4.57] Typ. 48 Spaces at .050 10 Spaces 31 Spaces [4.57] [1.27] at[1.0.2570] at[1.0.2570] Section L-L Part Numbers W Contact 5 Volt (Post Length) Finish 3 Plastic 3 Metal Pylons Holddowns .100 Plating B 145166-2 — 2.54 Plating C 145166-4 145169-4 .125 Plating C 145166-8 145169-8 3.18 Surface Mount Plating C — 145113-1 Notes: 1. Connectors are supplied with either cored (shown above) or solid side walls. Notes: 2. Other connector sizes can be made available, consult Tyco Electronics. 8 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors 32 Bit, 3.3 and 5 Volt Plastic Pylons Signaling .350 [8.89] 60 Dual Positions with 2 Plastic Pylons or 3.340 2 Metal Holddowns [84.84] Material and Finish: Housing Y—High temperature thermo- L (2[0. 0P.83lc95s].) (2 3P5lc°s.) [.41.7302±±.00.2501] plastic 94V-0 rated, white Housing Z—Nylon 6/6, white .300 [7.62] Contacts—Phosphor bronze, plated as .610 follows: W[±±.00.1205] [15.49] Typ. Plating A—Duplex plated gold flash in contact area, .000100 [0.00254] min. tin-lead on solder tails, with entire con- .150 .050 tnaicctk uelnderplated .000050 [0.00127] min. 10 Spaces L .050 See Note. [1.T0.y56p20.] (2[3 P.8lc1s].) (2[1 P.2lc7s].S)older Tail CL Plating B—Duplex plated .000015 .075 at[1.0.2570] 48 Spaces at [1.27] Section L-L [0.00038] min. gold in contact area, [1.90] .000100 [0.00254] min. tin-lead on solder (2 Plcs.) tails, with entire contact underplated .000050 [0.00127] min. nickel Plating C—Duplex plated .000030 [0.00076] min. gold in contact area, .000100 [0.00254] min. tin-lead on solder tails, with entire contact underplated .000050 [0.00127] min. nickel Related Product Data: Through Surface Performance Specifications— Metal Holddowns .035 Hole Mount page 7 L (2[0 P.8lc9s].) (2 3P5lc°s.) [4.1.3720±±.00.2501] Technical Documents: .300 .300 .610 [7.62] [7.62] Product Specification W[±±.00.1205] [15.49] 108-14034 Typ. .078 .17+.02 Application Specification [1R.e9f8.] .003 [4.318+.508] [.076] 114-26012 L See Note. [1.0.5620] [3.1.8510] .050 Solder [.41.8507] 10 Spaces 48 Spaces at [.10.5207] Typ. (2 Plcs.) (2[ 1P.2lc7s].)Tail CL [4.1.5870] .075 at .050 [1.90] [1.27] Section L-L (2 Plcs.) Part Numbers W Housing Contact (Post Length) Material Finish 2 Plastic 2 Metal Pylons Holddowns Plating A 145154-1 145167-1 .100 Y Plating B 145154-2 — 2.54 Plating C 145154-4 145167-4 .118 Z Plating A 11299-1 — 3.00 Plating B 11299-6 — .125 3.18 Y Plating C 145154-8 — Surface Mount Y Plating C — 145098-1 Notes: 1. Connectors are supplied with either cored (shown above) or solid side walls. Notes: 2. Other connector sizes can be made available, consult Tyco Electronics. 9 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors 64 Bit, 3.3 Volt Signaling Plastic Pylons 92 Dual Positions .350 with 3 Plastic Pylons or [8.89] 3 Metal Holddowns 5.040 [128.02] Material and Finish: .035 [0.89] 35° .170±.020 Housing—High temperature thermo- L (2 Plcs.) (2 Plcs.) [4.32±0.51] plastic 94V-0 rated, white Contacts—Phosphor bronze, plated as .300 follows: .610 [7.62] W±.010 [15.49] Plating B—Duplex plated .000015 [±0.25] Typ. [0.00038] min. gold in contact area, .000100 [0.00254] min. tin-lead on solder tails, with entire contact underplated .000050 [0.00127] min. nickel See Note. .150 L [1.0.5620] [3.1.8510] [1.0.2570]Solder Tail CL Plating C—Duplex plated .000030 [3.81] 31 Spaces Typ. (2 Plcs.) (2 Plcs.) [.t0a0i0.l0s00,1 0w070it6 h[] 0 em.n0it0nir2.e 5g c4oo]l dnm tianicn tc. uotinnndt-aleecratp dala roetenad, solder (2[.1 0P.79lc50s].) 1a0t S[1.p0.2a57c0e]s 48 Spaces at[1.0.2570] at[1.0.2570] Section L-L .000050 [0.00127] min. nickel Related Product Data: Performance Specifications— page 7 Technical Documents: Product Specification 108-14034 Through Surface Application Specification Hole Mount Metal Holddowns 114-26012 .035 .170±.020 [0.89] 35° [4.32±0.51] L (2 Plcs.) (2 Plcs.) .300 .300 [7.62] [7.62] .610 [15.49] See Note. .078 .17+.02 [1.98] .003 [4.318+.508] Ref. [.076] .180 W[T±±0.y0.p2150.] 1La0t S[1.p0.2a57c0e]s (2[.1 0P.79lc50s].) [.3.10.585010] 3a1t [S1.0p.25a70c]es [1.T0.y56p20.] (2[.3 1P.58lc01s].) (2[ 1.P0.2l5c70s].)SToalidl eCLr [4.1.5870] [4.57] 48 Spaces at[1.27] Section L-L Part Numbers W Contact 3.3 Volt (Post Length) Finish 3 Plastic 3 Metal Pylons Holddowns .100 Plating B — 145168-2 2.54 Plating C 1-145165-4 145168-4 .125 Plating C 1-145165-8 — 3.18 Surface Plating C — 145246-1 Mount Notes: 1. Connectors are supplied with either cored (shown above) or solid side walls. Notes: 2. Other connector sizes can be made available, consult Tyco Electronics. 10 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Product Facts n High density .050 [1.27] centerline spacing of contacts n Easy mating of high-circuit count daughter boards n Compatible with infrared reflow (IR) soldering techniques n Polarizing web for positive board-to-connector registration n Choice of plastic pylons or metal holddowns n Recognized under the Component Program of Underwriter Laboratories Inc. File No. E28476 n Certified by Canadian Standards Association, File No. LR 7189 ® Performance Specifications: Contact Current Rating* —1 ampere Termination Resistance — 20 milliohms max. (initial) 30 milliohms max. (final) Dielectric Withstanding Voltage — The need to conserve AMP Standard Edge .050 500 VAC min. space and pack more func- Series connectors are ideal Insulation Resistance — 1000 tion into a given area has for fast automated robotic megohms min. demanded that .050 [1.27] assembly with registration Mating Force — .5 oz. [0.14 N] per centerline spacing become features and dimensional contact pair a reality. AMPStandard tolerancing for more accurate Unmating Force — 1 oz. [0.3 N] per Edge .050 Series connec- pickup and placement, and contact pair tors are the ideal vehicle for are packaged in robotics- Durability (Tested to) — 100 mating mother/daughter board compatible trays. cycles applications requiring this Application Temperature — Plastic guide posts or metal real estate. +215°C for 120 seconds max. holddowns align the con- Temperature Range — These rugged connectors nector with the mother board –55°C to +85°C have two rows of contacts and retain it for soldering. on .050 [1.27] centerlines. To make circuit routing easy, Polarizing webs provide connector solder posts are *Consult Tyco Electronicsengi- neering when paralleling con- positive board-to-connector arranged in a four-row .100 tacts for power applications. registration, while insertion [2.54] staggered grid. High- force allows even high temperature tolerant mate- circuit-count daughter rials promote that these boards to mate easily. The connectors withstand High Density for DataBus connectors accept .054 to infrared reflow (IR) solder- Applications .070 [1.37 to 1.78] thick ing, while standoffs ease daughter boards and fea- flux cleaning. ture an overstress protected contact design. 11 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Configuration; 1 Key—2 Plastic Pylons .350 [8.89] Material and Finish: Housing—High temperature thermo- plastic, brown C Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold in .035 ctionn-lteaacdt aorne as,o .l0d0e0r 1ta0i0ls [,0 w.0it0h2 e5n4t]i rme icno.n- L (2[0 P.8lc9s].) (2 3P5lc°s.) [.41.7302±±.00.2501] tact underplated .000050 [0.00127] min. nickel .300 [7.62] .610 [15.49] Related Product Data: Performance Specifications— page 11 .012 W [.10.7950] L [.10.6502]Typ. [0T.y3p0.] TP10re8oc-dh1u4nc0it3c S4aple Dcioficcuamtioennts: L(ePnogstht) Aa tS(2p[1 .aP0.c25lec70ss].) Ba Stp[a1.0c.25e70s] (2[.3 1P.58lc01s].) [.10.5207] (2 Plcs.) Application Specification 114-26012 .016 Section L-L Typ. [0.41] No. of Dimensions W PC Board Connector Dual (Post Hole Positions A B C Length) Layout Part Numbers 23 10 11 1.490 .100 A 0-650090-7 37.85 2.54 30 10 18 1.840 .100 B 0-650090-6 46.74 2.54 .100 B 0-650090-3 40 10 28 2.340 2.54 59.44 .140 B 0-650181-2 3.56 45 10 33 2.590 .100 A 0-650090-2 65.79 2.54 .100 B 10-650090-11 56 10 44 3.140 2.54 79.76 .140 B 0-650181-1 3.56 80 37 41 4.340 .100 C 0-650090-9 110.24 2.54 .100 A 10-650092-12 4.890 2.54 91 41 48 124.21 .140 A 0-650092-2 3.56 1 Connector used for VLLocal Bus and MCA Bus applications. 2 Connector used for MCA Bus applications. Notes:1. Other connector sizes can be made available, consult Tyco Electronics. 2. .125 [3.18] post length is available, consult Tyco Electronics. 12 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Configuration; 1 Key—2 Plastic Pylons .350 [8.89] Material and Finish: Housing—High temperature thermo- plastic, brown D Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold in contact area, .000100 [0.00254] min. .035 tin-lead on solder tails, with entire [0.89] 35° .170±.020 contact underplated .000050 [0.00127] L (2 Plcs.) (2 Plcs.) [4.32±0.51] min. nickel .300 .610 [7.62] Related Product Data: [15.49] Performance Specifications— page 11 W [1.0.9705] L C Spaces [1.0.5620]Typ. [.00.1320] Technical Documents: L(ePnogstht) (2 Plcs.) Ba Stp.a0c5e0s at[1.0.2570] .150 Typ. P10r8o-d1u4c0t3 S4pecification Aa Stp[1.a0.c25e70s] [1.27] [3.1.8510] (2[3 P.8lc1s].) [1.0.2570] (2 Plcs.) Application Specification Section L-L 114-26012 [2.0.4946]Dia. Max. [0.0.4116]Typ. No. of Dimensions W PC Board Connector Dual (Post Hole Positions A B C D Length) Layout Part Numbers .100 A 1650091-1* 66 10 44 9 3.740 2.54 95.00 .140 A 650091-2 3.56 *Connectors used for MCA Bus applications. Notes:1. Other connector sizes can be made available, consult Tyco Electronics. 2. .125 [3.18] post length is available, consult Tyco Electronics. 13 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Configuration; 1 Key/1 Web —3 Metal .350 [8.89] Holddowns 120 Dual Positions 6.440 [163.58] .035 [0.89] 35° Material and Finish: L (2 Plcs.) (2 Plcs.) Housing—High temperature thermo- plastic, brown .300 [7.62] Holddowns—Brass, plated .000150 .610 [0.00381] min. tin-lead over .000050 [15.49] .170±.020 [0.00127] min. nickel [4.32±0.51] Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold in .180 ctionn-lteaacdt aorne as,o .l0d0e0r 1ta0i0ls [,0 w.0it0h2 5e4n]t imrei n. W [1.0.9705] .150 L [1.0.5620] Typ. [4.57] contact underplated .000050 [0.00127] (Post (2 Plcs.) [3.81] 63 Spaces min. nickel Length) 10Spaces 44Spaces at [1.0.2570] [3.1.8510] ([21. 0.P25l7c0]s.)Solder Tail CL at [1.0.2570] at[1.0.2570] (2 Plcs.) Related Product Data: Section L-L Performance Specifications— page 11 Technical Documents: No. of W Connector Product Specification Dual (Post Part Positions Length) Numbers 104-14034 Application Specification 120 .31.4506 145031-3 114-26012 Note: Other connector sizes can be made available, consult Tyco Electronics. Configuration; End Key .096 Material and Finish: [2.44] .016 Typ. Dia. [0.41] Housing—High temperature thermo- Max. plastic, brown .350 Contacts—Phosphor bronze, duplex [8.89] plated .000030 [0.00076] min. gold in contact area, .000100 [0.00254] min. .099 [2.52] tin-lead on solder tails, with entire con- B Max. tact underplated .000050 [0.00127] min. .035 nickel L [0.89] 35° [.41.7302±±.00.2501] Related Product Data: .300 [7.62] Performance Specifications— .610 page 11 [15.49] Technical Documents: .012 Product Specification L [.10.6502]Typ. [0.30]Typ. 1A0p8p-l1i4c0a3ti4on Specification Post Length [.10.7950] ASpa.0c5e0s [.31.5801] (2[.1 0P.52lc07s].) 114-26012 at[1.27] (2 Plcs.) Section L-L No. of Dimensions Dual Post Connector Positions A B C D Length Part Numbers 1.480 1.350 1.310 .100 25 24 650719-1 37.59 34.29 33.27 2.54 Note: Other connector sizes can be made available, consult Tyco Electronics. 14 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors Product Facts n Maximum number of dual positions .100 [2.54] Centerlines-70, .125 [3.18] Centerlines-50, .150 [3.81] Centerlines-31 n Selective gold plating of contacts for high perfor- mance at low cost n .025 [0.64] square solid posts meet standard wrap- type specifications n For flow solder applications n Glass-filled polyester housing is 94V-0 rated n Accepts double sided PC boards, .054-.070 [1.27-1.78] thick n Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 n Certified by Canadian Standards Association, File No. LR 7189 Performance Specifications Contact Rating*:3 amperes continuous (UL and CSA) Contact Resistance:10 milliohms AMP Standard Edge II Right-angle connectors are Precision formed phosphor max. Connectors provide high also available with contacts bronze contacts are selec- Operating Temperature:–55°C to reliability and economy in arranged on .100 [2.54] tively gold plated. Phosphor +85°C packages compatible with centers, .150 [3.81] bronze has excellent industry standards for dou- row-to-row or .200 [5.08] strength characteristics Voltage Rating (Sea Level): .100 [2.54] centerline—1000 VAC (test) ble sided printed circuit row-to-row. which help the connector .125 [3.18] centerline—1500 VAC (test) boards. Card extenders with con- absorb load deflection .150 [3.81] centerline—1500 VAC (test) movement of a PC board Tyco Electronicsoffers tacts on .100 [2.54] and while maintaining sufficient Insulation Resistance:5000 Standard Edge II .125 [3.18] centers also are megohms min., after exposure to Connectors with or without available. contact force for good elec- humidity mounting ears, for rack trical connection. Bifurcated cantilever beam contacts Vibration Tolerance:10 to 500 hertz mounting and soldering. provide redundant contact. Contacts are arranged on Contact Engagement Force:12 oz [3.3 N] average per pair with .062 [1.57] .100 [2.54] centers, .125 PC board [3.18] centers, .150 [3.81] centers, .200 [5.08] Contact Separation Force:2 oz row-to-row; and .250 [6.35] [0.6 N] average per pair with .062 [1.57] PC board row-to-row. Humidity Tolerance:90%-95% for 96 hours *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 15 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors Styles .100 [2.54] and .125 [3.18] Centerline Solder Posts .100 [2.54] Centerline Right-Angle Posts without Mounting Ears with Low and No Mounting Ears Pages 17 and 18 Page 23 .100 [2.54] and .125 [3.18] Centerline Solder Posts with Low and Mid-High Mounting Ears Page 20 .100 [2.54] and .125 [3.18] Centerline Wrap-Type Posts with Mid-High Mounting Ears .100 [2.54] Centerline Solder Posts with Board Page 21 Retention Feature, without Mounting Ears Page 24 .100 [2.54] and .125 [3.18] Centerline .150 [3.81] Centerline Solder Posts (with Board Card Extenders Retention Feature), without Mounting Ears Page 22 Page 19 16 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Centerline, .064[1.63] Sq. x .130[3.30] Dp. Vertical Solder Posts, Intercontact Key Slot Without Mounting Ears .064[1.63] Sq. x .130[3.30] Dp. Material and Finish: Housing—Black glass-filled polyester, .141/.153 .100 94V-0 rated [2.54] D .368 [3.58/3.88] Contacts—Phosphor bronze, duplex C** [9.35] Retention Feature (Open End Card Slot) plated as follows: Plating A—.000030 [0.00076] gold in Accepts A .054/.070 contact area, tin on posts, with entire [1.37/1.77] .295 contact nickel underplated PC Board [7.49] Plating B—.000015 [0.00038] gold in contact area, tin on posts, with entire .610 .550 contact nickel underplated [15.49] [13.97] .155 [3.94] Plating C—Gold flash in contact area, tin on posts, with entire contact nickel underplated [2.1.5040] Typ. .060 Post B [1.52] .191 Length [4.85] Technical Documents: Product Specification 108-9039 No. of Dimensions Post Part Numbers Dual Positions A B C** D Length* Plating A Plating B Plating C .560 .450 Open .200 3 .125 10-650263-11 — — 14.22 11.43 End 5.08 .860 .750 .700 .500 .125 7-530843-5 Intercontact Keying Plug 6 21.84 19.05 17.78 12.70 .187 7-530843-6 — — 1.260 1.150 1.100 .900 .125 5-530843-0 Material: 10 — — 32.00 29.21 27.94 22.86 .187 4-530843-9 Natural color polyester 12 1.460 1.350 1.300 1.100 .125 0-530843-1 — — 37.08 34.29 33.02 27.94 1.760 1.650 1.600 1.400 15 .125 0-530843-2 — — 44.70 41.91 40.64 35.56 1.960 1.850 1.800 1.600 17 .125 5-530843-3 — — 49.78 46.99 45.72 40.64 2.060 1.950 1.900 1.700 18 .125 0-530843-3 2-530843-7 1176137-11 52.32 49.53 48.26 43.18 2.260 2.150 2.100 1.900 20 .125 5-530843-4 — — 57.40 54.61 53.34 48.26 2.460 2.350 2.300 2.100 Part Number 650025-2 22 62.48 59.69 58.42 53.34 .125 0-530843-4 — — (.100[2.54] Centerline) 2.760 2.650 2.600 2.400 25 .125 0-530843-5 — — 70.10 67.31 66.04 60.96 3.060 2.950 2.900 2.700 28 .125 0-530843-6 — — 77.72 74.93 73.66 68.58 3.260 3.150 3.100 2.900 .125 0-530843-7 30 — — 82.80 80.01 78.74 73.66 .187 1-530843-8 3.360 3.250 3.200 3.000 31 .125 6-530843-5 7-530843-0 — 85.34 82.55 81.28 76.20 3.860 3.750 3.700 3.500 36 .125 0-530843-8 — — 98.04 95.25 93.98 88.90 4.260 4.150 4.100 3.900 40 .187 2-530843-0 — — 108.20 105.41 104.14 99.06 50 5.260 5.150 5.100 4.900 .125 1-530843-1 — — 133.60 130.81 129.54 124.46 **Metric equivalent for post lengths are .125= 3.18; .187= 4.75. **Cdimension is card slot length. 1 Connectors with Retention Feature. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 17 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .125 [3.18] Centerline, .064[1.63] Sq. Vertical Solder Posts, Intercontact Key Slot x .130[3.30] Dp. .064[1.63] Sq. Without Mounting Ears x .130[3.30] Dp. Material and Finish: Housing—Black glass-filled polyester, .125 .368 94V-0 rated [3.18] CD** [9.35] .191/.203 Contacts—Phosphor bronze, plated [4.85/5.16] with .000030 [0.00076] gold in contact Retention Feature area, tin on posts, with entire contact nickel underplated Accepts Related Product Data: A .054/.070 .295 [1.37/1.77] [7.49] Performance Specifications— PC Board page 15 PC Board Hole Layout—page 26 .610 .550 PC Board Edge Pattern—page 27 [15.49] [13.97] .155 Special Application—page 96 [3.94] Technical Documents: .125 Post (pages 186, 187): [3.18] B [1.0.5620] [.62.4111] Length Product Specification 108-9039 Intercontact Keying Plug Material: No. of Dimensions Post Natural color polyester Dual Part Numbers Positions A B C** D Length* 1.035 .875 .875 .625 6 .125 650207-11 26.29 22.22 22.22 15.88 2.035 1.875 1.875 1.625 14 .187 5-530844-8 51.69 47.62 47.62 41.28 2.535 2.375 2.375 2.125 18 .187 1-530844-5 64.39 60.33 60.33 53.98 3.035 2.875 2.875 2.625 22 .187 1-530844-6 77.09 73.03 73.03 66.68 3.785 3.625 3.625 3.375 28 .187 1-530844-7 96.14 92.08 92.08 85.73 4.035 3.875 3.875 3.625 30 .187 1-530844-8 Part No. 650025-1 102.49 98.42 98.42 92.08 (.125[3.18] Centerline) 4.785 4.625 4.625 4.375 36 .187 1-530844-9 121.54 117.48 117.48 111.13 5.285 5.125 5.125 4.875 40 .187 2-530844-0 134.24 130.18 130.18 123.82 5.660 5.500 5.500 5.250 43 .125 1-530844-0 143.76 139.70 139.70 133.35 6.535 6.375 6.375 6.125 .125 1-530844-1 50 165.99 161.93 161.93 155.58 .187 2-530844-2 **Metric equivalent for post lengths are .125= [3.18]; .187= [4.75] **Cdimension is card slot length. 1Connector with Retention Feature. Note:Other connector sizes can be made available, consult Tyco Electronics. 18 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .150 [3.81] Centerline, Card Slot Accepts .045[1.14] Vertical Solder Posts, Inter-Contact B[±±0.0.2150] .P0r5in4t-e.0d7 C0ir[c1u.3it7 B-1o.a7r8d] CAonretaact Retention Feature, Without .015 Keying Slot [0.38] Mounting Ears +.005 .432 -.010 .305 Material and Finish: [10.97]+0.13 [9.27] .080 -0.25 [.203] Housing—Black glass-filled polyester, Lead in .200±.020 94V-0 rated Area [5.08±0.51] Contacts—Phosphor bronze, plated .016 [0.41] with .000030 [0.00076] gold in contact .035±.020 .020[0.51] [3.430±0.51] area, tin on posts, with entire contact nickel underplated .200 [5.08] Related Product Data: Performance Specifications— page 15 .600 [15.21] PC Board Hole Layout—page 26 PC Board Edge Pattern—page 27 Special Application—page 96 .024 [0.61] .025 0.143–.161 .020[0.51] Spaces at .150 = Dim A Ref. [0.63] [3.63–4.03] [3.81] No. of Dimensions Retention Post Part PoDsiutiaolns A B Location Length* Numbers 1.650 1.920 7-10, 12 .135 1-650728-2 41.91 48.77 15-18 2.700 2.970 7-10, 19 .135 1-650728-9 68.58 75.44 29-32 4.050 4.320 7-10, 28 .135 2-650728-9 102.87 109.73 25-32,47-50 4.500 4.770 7-10, 31 .135 3-650728-1 114.30 121.16 27-34,53-56 **Metric equivalent for post length is .135= [3.43] **Cdimension is card slot length. Note:Other connector sizes can be made available, consult Tyco Electronics. 19 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .100 [2.54] and .125 [3.18] .064[1.63] Sq. .064[1.63] Sq. x .130[3.30] Dp. x .130[3.30] Dp. .150 Centerline, Vertical Solder Intercontact Key Slot [3.81] Posts, Low and Mid-High Mounting Ears Material and Finish: G .128 .300 .368 H D [3.25] Dia. [7.62] Housing—Black glass-filled polyester, [9.35] C** 94V-0 rated F Accepts Contacts—Phosphor bronze, plated .360 .054/.070 A [9.14] [1.37/1.77] with .000030 [0.00076] gold in contact PC Board .295 area, tin on posts, with entire contact [7.49] nickel underplated .610 .550 [15.49] [13.97] .155 [3.94] Related Product Data: .250 Performance Specifications— [6.35] page 15 .060 PC Board Hole Layout—page 26 B [1.52] J Post E Length PC Board Edge Pattern—page 27 Low Mounting Ears .180 Special Application—page 96 [4.57] Technical Documents: (pages 186, 187): Product Specification 108-9039 .250 .141/.153 [6.35] [3.58/3.88] Intercontact Keying Plugs Mid-High Mounting Ears Retention Feature Material: .100 [2.54] Centerline Natural color polyester PoNDsoiut. iaoolfns A B C** D DimenEsions F G H J LePnogstth* NuPmabrters 15 14.47.6700 14.16.5901 14.06.0604 13.54.0506 26.73.8158 25.20.7751 .21.0504 .21.0504 .41.9815 .125 0-530841-2 18 25.20.6302 14.99.5503 14.89.0206 14.37.0108 26.76.4158 26.03.7352 .21.0504 .21.0504 .41.9815 .125 0-530841-3 25 27.07.6100 26.76.5301 26.66.0004 26.04.0906 38.43.4956 37.80.7151 .21.0504 .21.0504 .41.9815 ..112857 01--553300884411--56 30 38.22.6800 38.01.6001 37.81.0704 27.39.0606 39.78.4656 39.05.7851 .21.0504 .21.0504 .41.9815 .187 1-530841-8 36 39.88.6004 39.57.5205 39.37.0908 38.85.0900 141.24.4950 140.61.7251 .21.0504 .21.0504 .41.9815 .125 0-530841-8 Part No. 650025-2 .191 .125 1-530841-1 (.100 [2.54] Centerline) 5.260 5.150 5.100 4.900 5.845 5.575 .100 .100 4.85 .187 2-530841-2 50 133.60 130.81 129.54 124.46 148.46 141.60 2.54 2.54 .31.4518--.31.5838 .125 0-650718-11,2 **Metric equivalent for post lengths are .125= [3.18]; .187= [4.75] **Cdimension is card slot length. 1Connector with Retention Feature. 2Connector with Mid-High Mounting Ears. Note:Other connector sizes can be made available, consult Tyco Electronics. .125 [3.18] Centerline PoNDsoiut. iaoolfns A B C** D DimenEsions F G H J LePnogstth* NuPmabrters 6 12.60.3259 2.28.7252 2.28.7252 1.56.2858 13.95.5550 13.22.9859 .31.2158 .31.2158 .62.4111 .125 1-531341-3 3.785 3.505 3.625 3.375 4.305 4.045 .125 .125 .62.4111 .187 1-530842-7 28 96.14 89.03 92.08 85.73 109.35 102.74 3.18 3.18 .62.4111 .187 23-531341-02 6.535 6.255 6.375 6.125 7.055 6.795 .125 .125 .241 50 165.99 158.88 161.93 155.58 179.20 172.59 3.18 3.18 6.11 .125 1-530842-1 Part No. 650025-1 (.125 [3.18] Centerline) **Metric equivalent for post lengths are .125= [3.18]; .187= [4.75] **Cdimension is card slot length. 1Connector with Retention Feature. 2Connector with Mid-High Mounting Ears. Note:Other connector sizes can be made available, consult Tyco Electronics. 20 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .100 [2.54] and .125 [3.18] .064[1.63] Sq. Centerline, Vertical Wrap- .064[1.63] Sq. x .130[3.30] Dp. .150 x .130[3.30] Dp. Intercontact Key Slot [3.81] Type Posts, Mid-High Mounting Ears Material and Finish: .300 Housing—Black glass-filled polyester, .368 G .128 Dia. [7.62] 94V-0 rated [9.35] H D [3.25] Contacts—Phosphor bronze, plated C with .000030 [0.00076] gold in contact F area, tin on posts, with entire contact nickel underplated Accepts Related Product Data: A [.41.8507] [P.10C.53 47B//.o10a.77r07d] [7.2.4995] Performance Specifications— page 15 .610 .250 .550 PC Board Hole Layout—page 26 [15.49] [6.35] [13.97] .155 PC Board Edge Pattern—page 27 [3.94] Special Application—page 96 .060 [1.52] Technical Documents: B (pages 186, 187): Post E Length Product Specification J 108-9039 Intercontact Keying Plugs Material: Natural color polyester .100 [2.54] Centerline No. of Dimensions Post Part Dual Positions A B C** D E F G H J Length* Numbers 3.260 3.150 3.100 2.900 3.845 3.575 .100 .100 .200 30 .570 3-530396-3 82.80 80.01 78.74 73.66 97.41 90.80 2.54 2.54 5.08 3.860 3.750 3.700 3.500 4.435 4.175 .100 .100 .200 36 .570 3-530396-4 98.04 95.25 93.98 88.90 112.65 106.04 2.54 2.54 5.08 Part No. 650025-2 4.260 4.150 4.100 3.900 4.845 4.575 .100 .100 .200 40 .570 3-530396-4 (.100 [2.54] Centerline) 108.20 105.41 104.14 99.06 123.06 116.21 2.54 2.54 5.08 **Metric equivalent for post length is .570= [14.48]. **Cdimension is card slot length. Note:Other connector sizes can be made available, consult Tyco Electronics. .125 [3.18] Centerline No. of Dimensions Post Part Dual Positions A B C** D E F G H J Length* Numbers 3.035 2.755 2.875 2.625 3.555 3.295 .125 .125 .250 22 .570 4-530825-5 77.09 69.98 73.02 66.67 90.30 83.69 3.18 3.18 6.35 **Metric equivalent for post length is .570= [14.48]. **Cdimension is card slot length. Part No. 650025-1 Note:Other connector sizes can be made available, consult Tyco Electronics. (.125 [3.18] Centerline) 21 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .100 [2.54] and .125 [3.18] .064[1.63] Sq. Centerlines, Card Extender x .130[3.30] Dp. x. 0.16340[1[3.6.330] ]S Dqp.. .128 Dia. [3.25] Contacts Intercontact Key Slot Material and Finish: .368 [9.35] Housing—Black glass-filled polyester, 94V-0 rated .300 Contacts—Phosphor bronze, plated G .150 [7.62] with .000030 [0.00076] gold in contact .180 H D [3.81] area, tin on posts, with entire contact [4.67] C nickel underplated Related Product Data: Performance Specifications— E page 15 PC Board Hole Layout—page 26 F Accepts PC Board Edge Pattern—page 27 .180 .054/.070 .295 A [4.57] [1.37/1.77] [7.49] Technical Documents: PC Board (pages 186, 187): Product Specification .610 .550 108-9039 [15.49] [13.97] .155 Mounting Block [3.94] Material: .250 .060 [6.35] Natural color nylon [1.52] .062 Dia. [1.57] B .340 Roll Pin [8.63] Fits Card Extender .054/.070 Connector [1.37/1.77] Housing Ref. #5 Self PC Board Tapping Screws .100 [2.54] Centerline No. of Dimensions Mounting Dual Part Numbers Block Positions A B C** D E F G H 5.260 5.160 5.100 4.900 5.845 5.575 .100 .100 .062 50 133.60 130.81 129.54 124.46 148.46 141.60 2.54 2.54 530826-3 [1.57] PC Board Ref. *Cdimension is card slot length. Kit Part No.531250-4 1No mounting ears. Each kit includes 2 mounting blocks, Note:Other connector sizes can be made available, consult Tyco Electronics. 2 self tapping screws, #5 x .437 [11.10] and 2 roll pins, .075 x .250 [1.57 x 6.35] Intercontact Keying Plugs Material: Natural color polyester .125 [3.18] Centerline No. of Dimensions Dual Part Numbers Positions A B C** D E F G H 4.785 4.505 4.625 4.375 5.035 5.045 .125 .125 36 530384-2 121.54 114.43 117.48 111.13 134.75 128.14 3.18 3.18 *Cdimension is card slot length. Part No. 650025-1 Note:Other connector sizes can be made available, consult Tyco Electronics. (.125 [3.18] Centerline) Part Number 650025-2 (.100[2.54] Centerline) 22 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Right-Angle Accepts Solder Posts, with Low and .064[1.63] Sq. .064[1.63] Sq. .054/.070 No Mounting Ears x .130[3.30] Dp. Intercontact Key Slot x .130[3.30] Dp. [1.37/1.77] PC Board .295 Material and Finish: [7.49] Housing—Black glass-filled polyester, .155 94V-0 rated .300 [3.94] .368 .100 [7.62] G Contacts—Phosphor bronze, duplex [9.35] [2.54] plated as follows: [.21.0504] D Plating A—.000030 [0.00076] gold in C Post contact area, tin on posts, with entire Length contact nickel underplated With Board Locks Plating B—.000015 [0.00038] gold in contact area, tin on posts, with entire contact nickel underplated E Accepts F .054/.070 [1.37/1.77] .295 Related Product Data: A PC Board [7.49] Performance Specifications— page 15 .610 .550 [15.49] [13.97] Technical Documents: G .155 [3.94] Product Specification 108-9039 .250 .128 .080 [6.25] [3.25] Dia. B [1.82] Post Length Low Mounting Ears Intercontact Keying Plug Low Mounting Ears Material: No. of Dimensions Post Part Numbers Dual Natural color polyester Positions A B C* D E F G1 Length2 (Plating A) 1.460 1.350 1.300 1.100 2.045 1.775 x.100x 12 .090 3145089-13 37.08 34.29 33.02 27.94 51.94 45.08 .150 2.060 1.950 1.900 1.700 2.645 2.375 x.100x 18 .090 645384-1 52.32 49.53 48.26 43.18 67.18 60.32 .150 2.260 2.150 2.100 1.900 2.845 2.575 x.100x 20 .090 645384-3 57.40 54.61 53.34 48.26 72.30 65.40 .150 *Cdimension is card slot length. 1 Metric equivalent for .100 x .150and .100 x .200are [2.54 x 3.81] and [2.54 x 5.08]. Part Number 650025-2 2 Metric equivalent for post length is .090= [2.27]. (.100[2.54] Centerline) 3 Connector with Board Locks. Note:Other connector sizes can be made available, consult Tyco Electronics. No Mounting Ears No. of Dimensions Post Part Numbers Dual Positions A B C* D G1 Length2 Plating A Plating B 1.760 1.650 1.600 1.400 .100x 15 .090 650118-1 — 44.70 41.91 40.64 35.56 .150 1.960 1.850 1.800 1.600 .100x 17 .090 650187-1 — 49.78 46.99 45.72 40.64 .200 2.760 2.350 2.600 2.400 .100x 25 .090 — 532600-2 70.10 67.61 66.04 60.96 .150 3.360 3.250 3.200 3.000 .100x 31 .090 — 532600-4 85.34 82.55 81.28 76.20 .150 3.460 3.350 3.300 3.100 .100x 32 .090 — 532600-5 87.88 85.09 83.82 78.74 .150 2.160 2.750 2.700 1.800 .100x 19 .090 — 532600-6 54.86 69.85 68.58 45.72 .150 *Cdimension is card slot length. 1 Metric equivalent for .100 x .150and .100 x .200are [2.54 x 3.81] and [2.54 x 5.08]. 2 Metric equivalent for post length is .090= [2.27]. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 23 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Centerline Vertical Solder Posts, .064[1.63] Sq. Retention Feature, x .130[3.30] Dp. Intercontact Key Slot Without Mounting Ears Material and Finish: .064[1.63] Sq. .368 x .130[3.30] Dp. [9.35] Housing—Black glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, duplex .100 D [2.54] plated as follows: C Plating A—.000030 [0.00076] gold in contact area, tin on posts, with entire contact nickel underplated Plating B—.000015 [0.00038] gold in contact area, tin on posts, with entire contact nickel underplated A .0A5c4c/e.0p7ts0 .295 Plating C—Gold flash in contact area, [1.37/1.77] [7.49] PC Board tin on posts, with entire contact nickel underplated .610 .550 [15.49] [13.97] Technical Documents: .155 [3.94] Product Specification 108-9039 .060 [1.52] .191 Post Length .100 [4.85] Typ. [2.54] B Intercontact Keying Plug Material: Natural color polyester .141/.153 [3.58/3.88] Retention Feature Part Number 650025-2 (.100[2.54] Centerline) No. of Dimensions Post Retention PartNumbers Dual Positions A B C** D Length* Feature Plating A 2.060 1.950 1.900 1.700 18 .125 3-6, 31-34 1-645235-4 52.32 49.53 48.26 43.18 3.360 3.250 3.200 3.000 3-6, 29-32 or 31 .125 1-645235-1 85.34 82.55 81.28 76.20 31-34, 57-60 5.260 5.150 5.100 4.900 3-6, 49-52, 50 .125 1-645235-3 133.60 130.81 129.54 124.46 95-98 6.260 6.150 6.100 5.900 3-6, 55-58, 60 .125 1-645235-8 159.00 156.21 154.94 149.86 63-66, 115-118 **Metric equivalent for post length is .125= [3.18]. **Cdimension is card slot length. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 24 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Centerline, Special 18/31 Dual Combination Connector, .100 .200 Vertical Solder Posts, [2.54] [5.08] Without Mounting Ears .368 [9.35] .100 Material and Finish: [2.54] 1.900 3.200 .141/.153 [48.26] [81.28] [3.58/3.88] Housing—Black glass-filled polyester, 94V-0 rated, except where noted Retention Feature Contacts—Phosphor bronze, plated 5.460 Accepts with .000030 [0.00076] gold in contact [138.68] .054/.070 area (except where noted), tin on posts, [1.37/1.77] .295 with entire contact nickel underplated PC Board [7.49] .610 .550 Technical Documents: [15.49] [13.97] Product Specification .400 108-9039 [10.16] .060 [1.52] .191 A [4.85] A Solder Posts 5.350 [135.89] Intercontact Keying Plug Material: Natural color polyester No. of Post Dimension Retention Dual Part Numbers Type A Feature Positions .125 3-6, 41, 42, 645169-2 52 Solder Posts 3.18 51, 52, 93-96 1536128-11 Part Number 650025-2 52 Solder Posts .125 None 645169-3 (.100[2.54] Centerline) 3.18 .125 3-14, 41, 42, 52 Solder Posts 645169-4 3.18 51, 52, 85-96 52 Solder Posts .125 5, 6, 31, 32, 2176139-12 3.18 41, 42, 93, 94 2 .187 52 Solder Posts None 650616-1 4.75 1 Housing material is high temperature glass-filled polyester, gray. 2 Contact area is gold flash. Notes: 1. Card slot length is 5.300[134.62]. 2. Other connector sizes can be made available, consult Tyco Electronics. 3. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 25 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) Recommended Vertical Post Connectors PC Board Hole Layouts D B C±.003Dia. [±0.08] .128 Dia. [3.25] A F Dimensions Connector Type A B C D F .100 .200 .040 Solder Post/Retention See Note 1 See Note 2 2.54 5.08 1.02 .150 .200 .040 Solder Post/Retention See Note 4 See Note 2 3.81 5.08 1.02 .125 .250 .040 Solder Post, Mounting Ears See Note 3 See Note 3 3.18 6.35 1.02 .100/.125 .200/.250 .040 Solder Post, W/O Mounting Ears See Note 4 See Note 2 2.54/3.18 5.08/6.35 1.02 .100 .200 .042 Wrap-Type Post See Note 5 See Note 5 2.54 5.08 1.07 .125 .250 .042 Wrap-Type Post See Note 5 See Note 5 3.18 6.35 1.07 Notes: 1. Refer to page 24 for DDimensions and Dual Positions. 2. No mounting ears. Dimensions do not apply. 3. Refer to page 20 for Dand FDimensions and Dual Positions. 4. Refer to pages 18 and 19 for DDimensions and Dual Positions. 5. Refer to page 21 for Dand FDimensions and Dual Positions. Right-Angle Post Connectors F D B .128 Dia. [3.25] A C±.003Dia. [±0.08] G .337 [8.56] Dimensions Connector Type A B C D F G .100 .150 .042 .137 Right-Angle Posts, Mounting Ears See Note 1 See Note 1 2.54 3.81 1.07 3.48 .100 .150 or .200 .042 Right-Angle Posts, No Mounting Ears See Note 2 See Note 3 See Note 3 2.54 3.81 or 5.08 1.07 Notes: 1. Refer to page 23 for Dand FDimensions and Dual Positions. 2. Refer to page 23 for DDimensions and Dual Positions. 3. No Mounting Ears, Dimensions do not apply. 26 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) Recommended PC Board Edge Pattern for PC Board Edge Pattern .100 [2.54] and .125 [3.18] Centerline .050 Datum CL [1.27] Intercontact Key Slot .015 x 45° [0.38] Chamfer .295 Min. [7.49] .310 Min. Engagement Depth [7.87] B .054/.070 A D[±±.00.0153] [1.37/1.77] C[±±.00.0153] .100 [2.54] Centerline .125 [3.18] Centerline No. of A = .093 [2.36] A = .118 [3.00] Dual B = .050 [1.27] B = .075 [1.90] Positions C D C D .386 .200 3 — — 9.80 5.08 .686 .500 .861 .625 6 17.42 12.70 21.87 15.88 1.086 .900 1.361 1.125 10 27.58 22.86 34.57 28.58 1.286 1.100 12 — — 32.66 27.94 1.386 1.200 13 — — 35.20 30.48 1.861 1.625 14 — — 47.27 41.28 1.586 1.400 15 — — 40.28 35.56 1.786 1.600 17 — — 45.36 40.64 1.886 1.700 2.361 2.125 18 47.90 43.18 59.97 53.98 2.286 2.100 2.861 2.625 22 58.06 53.34 72.67 66.68 2.586 2.400 25 — — 65.68 60.96 2.886 2.700 3.611 3.375 28 73.30 68.58 91.72 85.73 3.086 2.900 3.861 3.625 30 78.38 73.66 98.07 92.08 3.186 3.000 3.986 3.750 31 80.92 76.20 101.24 95.25 3.586 3.400 35 — — 91.08 86.36 3.686 3.500 4.611 4.375 36 93.62 88.90 117.12 111.13 4.086 3.900 5.111 4.875 40 103.78 99.06 129.82 123.82 4.386 4.200 5.486 5.250 43 111.40 106.68 139.34 133.35 5.086 4.900 6.361 6.125 50 129.18 124.46 161.57 155.58 6.086 5.900 60 — — 154.58 149.86 7.086 6.900 70 — — 179.98 175.26 27 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Card Edge Connectors Product Facts nDouble readout Card Edge connectors use dip solder contacts nLarge lead-in chamfers allow easy PC board installation nInsulator standoffs prevent solder from wicking nVarious lengths for custom applications nContact option, single or dual row Description Design Advantages Cantilever Beam The Cantilever Beam Series • Circuit Integrity: Robust The Cantilever Beam Card products from Tyco cantilever contacts are Edge connector comes with Electronics are double designed to promote standard high temperature readout cardedge optimal normal forces at plastic insulators. Contacts connectors, using dip the lowest possible cost. are available in a variety of solder contacts. Tooled for Our uniquely contoured lengths to accommodate flexible manufacturing, contact mating surface various custom applica- these Card Edge gives you constant tions. Standoffs allow for connectors are readily engagement, even when cleaning and draining and available in a broad subjected to continuous are available as an option assortment of sizes and vibration. on most insulator bodies. mounting styles. Our • Ease of Assembly: Cantilever Beam Card Edge connectors meet industry Generous lead-in cham- offers a variety of card slot standards. fers let your P.C. board depths. A full scoop option slide easily into the con- is available for ease of nector. Insulator standoffs installation in applications are provided to facilitate where visibility is limited. cleaning and prevent sol- Contact options vary in this der from wicking. series from dual row stan- Availability, flexibility, per- dard contacts, single row formance and very low cost options and press-fit. make the Cantilever Series from Tyco Electronics the clear choice in Card Edge connectors. 28 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors .100 x .200 [2.54 x 5.08] Centerline Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified by Canadian Standards Association, File No. LR49571 .020±.010Contact Gap [.51±.25] Physical Properties: [.31.4658] .300 Card Slot Depth [7.62] Insulation Resistance—5000 megohms minimum. Insertion/Withdrawal Force .13 (Daughter Card)—8 oz./2 oz. [3.30] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. .200 Insulator Body—Glass filled [5.08] thermoplastic, UL rating 94V-O. High temp. plastic option is available; add suffix M399 to part number. .400 [10.16] Color—Black Contacts—High strength copper alloy. 1.700 3.000 [43.18] [76.20] Contact Plating—.000050 [0.00127] .100 nickel underplate with .000030 .200 [2.54] [0.00076] gold in the mating area, [5.08] tin/lead on tails, .000100 [0.00254] minimum .040±.003 Dia. Electrical Properties: [1.02±.080] Operation Voltage—600 VDC 5.460 (sea level) [138.68] Current Rating—3 Amperes 5.300 [134.62] Initial Contact Resistance— 1.900 3.200 10 milliohms 3.70 [48.26] [81.28] [9.40] Environmental Properties: Operating Temperature— -55˚C to +125˚C TMeILm-SpTeDra-2tu0r2e m Ceythcolidn 1g0—7 [.21.0504]Ref. [5.2.0080]Ref. 5.100 [129.54] .300 [7.62] .610 [15.49] .06 [1.52] [1.0.562] .[120.504]Typ. Ordering Information Acquired Part Number C8D52DS29C1M191– Insulator with molded-in polarizing key with card guide chamber. The card slot lengths are 1.900 [48.26] and 3.200 [81.28]. Includes retention tails for .062 [1.57] PCB to hold connectors securely during handling. C8D52DS29C1M195– Same as above. No retention tails. 29 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors .100 x .200 [2.54 x 5.08] Centerline Dip Solder Tails, .300 [7.62] Card Slot Depth Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified by Canadian Standards Association, File No. LR49571 D Physical Properties: E .020±.010Contact Gap [.51±.25] Insulation Resistance—5000 .145 megohms minimum. [3.68] .300 Card Slot Depth [7.62] Insertion/Withdrawal Force .370 (Daughter Card)—8 oz./2 oz. [9.40] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled .100 Typ. J thermoplastic, UL rating 94V-O. High [2.54] .200 [5.08] temp. plastic option is available; add B suffix M399 to part number. Color—Black A Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] C nickel underplate with .000030 .250 [0.00076] gold in the mating area, [6.35] tin/lead on tails, .000100 [0.00254] minimum .610 Electrical Properties: [15.49] Operation Voltage—600 VDC (sea level) Current Rating—3 Amperes .060 .180 [1.52] [4.57] Initial Contact Resistance— 10 milliohms .020 Typ. Dia. [0.51] Environmental Properties: E Operating Temperature— -55˚C to +125˚C Dim B Temperature Cycling— MIL-STD-202 method 107 Dim E .040±.003 Vibration—MIL-STD-202 method 204 .[132.285] Dia. [1.02±.08] Dia. Related Product Data: Daughter Card Edge Pattern— .200 page 57 [5.08] .100 [2.54] Mounting Styles .125 [3.18] Dia. #4-40 .125 [3.18] Dia. .250 .250 [6.35] [6.35] Centered Mounting Ear Centered Mounting Ear Flush Mounting Ear Flush Mounting Ear No Mounting Ears .125 [3.18] Thru Hole 4-40 Threaded Insert .125 [3.18] Thru Hole 4-40 Threaded Insert 30 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row Mounting Ear Options No. of Du a l Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h PRo e s a i d t i o o u n t s A B C D E M.1o2u5n"t i[n3g.1 E8a]r 4M-4o0u nTthinrega Edaedr Mo Eu a n r t s i n g M.1o2u5n"t i[n3g.1 E8a]r 4M-4o0u nTthinrega Edaedr Thru Hole in s e r t Thru Hole in s e r t Tail Length .130" [3.30] (DIM “J”) 6 1. 4 3 5 1. 1 7 5 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 D S 2 9 A 1 C8 D 0 6 D S 2 9 B 1 C8 D 0 6 D S 2 9 C 1 C8 D 0 6 D S 2 9 D 1 C8 D 0 6 D S 2 9 E 1 36 . 4 5 29 . 8 5 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 D S 2 9 A 1 C8 D 1 0 D S 2 9 B 1 C8 D 1 0 D S 2 9 C 1 C8 D 1 0 D S 2 9 D 1 C8 D 1 0 D S 2 9 E 1 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 D S 2 9 A 1 C8 D 1 2 D S 2 9 B 1 C8 D 1 2 D S 2 9 C 1 C8 D 1 2 D S 2 9 D 1 C8 D 1 2 D S 2 9 E 1 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 D S 2 9 A 1 C8 D 1 5 D S 2 9 B 1 C8 D 1 5 D S 2 9 C 1 C8 D 1 5 D S 2 9 D 1 C8 D 1 5 D S 2 9 E 1 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 C8 D 1 8 D S 2 9 A 1 C8 D 1 8 D S 2 9 B 1 C8 D 1 8 D S 2 9 C 1 C8 D 1 8 D S 2 9 D 1 C8 D 1 8 D S 2 9 E 1 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 D S 2 9 A 1 C8 D 2 0 D S 2 9 B 1 C8 D 2 0 D S 2 9 C 1 C8 D 2 0 D S 2 9 D 1 C8 D 2 0 D S 2 9 E 1 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 D S 2 9 A 1 C8 D 2 2 D S 2 9 B 1 C8 D 2 2 D S 2 9 C 1 C8 D 2 2 D S 2 9 D 1 C8 D 2 2 D S 2 9 E 1 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 D S 2 9 A 1 C8 D 2 5 D S 2 9 B 1 C8 D 2 5 D S 2 9 C 1 C8 D 2 5 D S 2 9 D 1 C8 D 2 5 D S 2 9 E 1 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 D S 2 9 A 1 C8 D 2 8 D S 2 9 B 1 C8 D 2 8 D S 2 9 C 1 C8 D 2 8 D S 2 9 D 1 C8 D 2 8 D S 2 9 E 1 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 D S 2 9 A 1 C8 D 3 0 D S 2 9 B 1 C8 D 3 0 D S 2 9 C 1 C8 D 3 0 D S 2 9 D 1 C8 D 3 0 D S 2 9 E 1 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 D S 2 9 A 1 C8 D 3 1 D S 2 9 B 1 C8 D 3 1 D S 2 9 C 1 C8 D 3 1 D S 2 9 D 1 C8 D 3 1 D S 2 9 E 1 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 76 . 2 0 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 D S 2 9 A 1 C8 D 3 5 D S 2 9 B 1 C8 D 3 5 D S 2 9 C 1 C8 D 3 5 D S 2 9 D 1 C8 D 3 5 D S 2 9 E 1 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 D S 2 9 A 1 C8 D 3 6 D S 2 9 B 1 C8 D 3 6 D S 2 9 C 1 C8 D 3 6 D S 2 9 D 1 C8 D 3 6 D S 2 9 E 1 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 D S 2 9 A 1 C8 D 4 0 D S 2 9 B 1 C8 D 4 0 D S 2 9 C 1 C8 D 4 0 D S 2 9 D 1 C8 D 4 0 D S 2 9 E 1 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 D S 2 9 A 1 C8 D 4 3 D S 2 9 B 1 C8 D 4 3 D S 2 9 C 1 C8 D 4 3 D S 2 9 D 1 C8 D 4 3 D S 2 9 E 1 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 D S 2 9 A 1 C8 D 5 0 D S 2 9 B 1 C8 D 5 0 D S 2 9 C 1 C8 D 5 0 D S 2 9 D 1 C8 D 5 0 D S 2 9 E 1 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 D S 2 9 A 1 C8 D 6 0 D S 2 9 B 1 C8 D 6 0 D S 2 9 C 1 C8 D 6 0 D S 2 9 D 1 C8 D 6 0 D S 2 9 E 1 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 Tail Length .160" [4.06] (DIM “J”) 6 1. 4 3 5 1. 1 7 5 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 D S 2 9 A 2 C8 D 0 6 D S 2 9 B 2 C8 D 0 6 D S 2 9 C 2 C8 D 0 6 D S 2 9 D 2 C8 D 0 6 D S 2 9 E 2 36 . 4 5 29 . 8 5 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 D S 2 9 A 2 C8 D 1 0 D S 2 9 B 2 C8 D 1 0 D S 2 9 C 2 C8 D 1 0 D S 2 9 D 2 C8 D 1 0 D S 2 9 E 2 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 D S 2 9 A 2 C8 D 1 2 D S 2 9 B 2 C8 D 1 2 D S 2 9 C 2 C8 D 1 2 D S 2 9 D 2 C8 D 1 2 D S 2 9 E 2 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 D S 2 9 A 2 C8 D 1 5 D S 2 9 B 2 C8 D 1 5 D S 2 9 C 2 C8 D 1 5 D S 2 9 D 2 C8 D 1 5 D S 2 9 E 2 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 C8 D 1 8 D S 2 9 A 2 C8 D 1 8 D S 2 9 B 2 C8 D 1 8 D S 2 9 C 2 C8 D 1 8 D S 2 9 D 2 C8 D 1 8 D S 2 9 E 2 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 D S 2 9 A 2 C8 D 2 0 D S 2 9 B 2 C8 D 2 0 D S 2 9 C 2 C8 D 2 0 D S 2 9 D 2 C8 D 2 0 D S 2 9 E 2 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 D S 2 9 A 2 C8 D 2 2 D S 2 9 B 2 C8 D 2 2 D S 2 9 C 2 C8 D 2 2 D S 2 9 D 2 C8 D 2 2 D S 2 9 E 2 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 D S 2 9 A 2 C8 D 2 5 D S 2 9 B 2 C8 D 2 5 D S 2 9 C 2 C8 D 2 5 D S 2 9 D 2 C8 D 2 5 D S 2 9 E 2 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 D S 2 9 A 2 C8 D 2 8 D S 2 9 B 2 C8 D 2 8 D S 2 9 C 2 C8 D 2 8 D S 2 9 D 2 C8 D 2 8 D S 2 9 E 2 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 D S 2 9 A 2 C8 D 3 0 D S 2 9 B 2 C8 D 3 0 D S 2 9 C 2 C8 D 3 0 D S 2 9 D 2 C8 D 3 0 D S 2 9 E 2 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 D S 2 9 A 2 C8 D 3 1 D S 2 9 B 2 C8 D 3 1 D S 2 9 C 2 C8 D 3 1 D S 2 9 D 2 C8 D 3 1 D S 2 9 E 2 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 76 . 2 0 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 D S 2 9 A 2 C8 D 3 5 D S 2 9 B 2 C8 D 3 5 D S 2 9 C 2 C8 D 3 5 D S 2 9 D 2 C8 D 3 5 D S 2 9 E 2 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 D S 2 9 A 2 C8 D 3 6 D S 2 9 B 2 C8 D 3 6 D S 2 9 C 2 C8 D 3 6 D S 2 9 D 2 C8 D 3 6 D S 2 9 E 2 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 D S 2 9 A 2 C8 D 4 0 D S 2 9 B 2 C8 D 4 0 D S 2 9 C 2 C8 D 4 0 D S 2 9 D 2 C8 D 4 0 D S 2 9 E 2 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 D S 2 9 A 2 C8 D 4 3 D S 2 9 B 2 C8 D 4 3 D S 2 9 C 2 C8 D 4 3 D S 2 9 D 2 C8 D 4 3 D S 2 9 E 2 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 31 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row Mounting Ear Options No. of Du a l Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Re a d o u t Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Thru Hole in s e r t Thru Hole in s e r t Tail Length .160" [4.06] (DIM “J”) (Continued) 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 D S 2 9 A 2 C8 D 5 0 D S 2 9 B 2 C8 D 5 0 D S 2 9 C 2 C8 D 5 0 D S 2 9 D 2 C8 D 5 0 D S 2 9 E 2 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 D S 2 9 A 2 C8 D 6 0 D S 2 9 B 2 C8 D 6 0 D S 2 9 C 2 C8 D 6 0 D S 2 9 D 2 C8 D 6 0 D S 2 9 E 2 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 Tail Length .220" [5.59] (DIM “J”) 6 1. 4 3 5 1. 1 7 5 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 D S 2 9 A 3 C8 D 0 6 D S 2 9 B 3 C8 D 0 6 D S 2 9 C 3 C8 D 0 6 D S 2 9 D 3 C8 D 0 6 D S 2 9 E 3 36 . 4 5 29 . 8 5 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 D S 2 9 A 3 C8 D 1 0 D S 2 9 B 3 C8 D 1 0 D S 2 9 C 3 C8 D 1 0 D S 2 9 D 3 C8 D 1 0 D S 2 9 E 3 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 D S 2 9 A 3 C8 D 1 2 D S 2 9 B 3 C8 D 1 2 D S 2 9 C 3 C8 D 1 2 D S 2 9 D 3 C8 D 1 2 D S 2 9 E 3 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 D S 2 9 A 3 C8 D 1 5 D S 2 9 B 3 C8 D 1 5 D S 2 9 C 3 C8 D 1 5 D S 2 9 D 3 C8 D 1 5 D S 2 9 E 3 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 C8 D 1 8 D S 2 9 A 3 C8 D 1 8 D S 2 9 B 3 C8 D 1 8 D S 2 9 C 3 C8 D 1 8 D S 2 9 D 3 C8 D 1 8 D S 2 9 E 3 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 D S 2 9 A 3 C8 D 2 0 D S 2 9 B 3 C8 D 2 0 D S 2 9 C 3 C8 D 2 0 D S 2 9 D 3 C8 D 2 0 D S 2 9 E 3 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 D S 2 9 A 3 C8 D 2 2 D S 2 9 B 3 C8 D 2 2 D S 2 9 C 3 C8 D 2 2 D S 2 9 D 3 C8 D 2 2 D S 2 9 E 3 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 D S 2 9 A 3 C8 D 2 5 D S 2 9 B 3 C8 D 2 5 D S 2 9 C 3 C8 D 2 5 D S 2 9 D 3 C8 D 2 5 D S 2 9 E 3 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 D S 2 9 A 3 C8 D 2 8 D S 2 9 B 3 C8 D 2 8 D S 2 9 C 3 C8 D 2 8 D S 2 9 D 3 C8 D 2 8 D S 2 9 E 3 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 D S 2 9 A 3 C8 D 3 0 D S 2 9 B 3 C8 D 3 0 D S 2 9 C 3 C8 D 3 0 D S 2 9 D 3 C8 D 3 0 D S 2 9 E 3 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 D S 2 9 A 3 C8 D 3 1 D S 2 9 B 3 C8 D 3 1 D S 2 9 C 3 C8 D 3 1 D S 2 9 D 3 C8 D 3 1 D S 2 9 E 3 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 76 . 2 0 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 D S 2 9 A 3 C8 D 3 5 D S 2 9 B 3 C8 D 3 5 D S 2 9 C 3 C8 D 3 5 D S 2 9 D 3 C8 D 3 5 D S 2 9 E 3 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 D S 2 9 A 3 C8 D 3 6 D S 2 9 B 3 C8 D 3 6 D S 2 9 C 3 C8 D 3 6 D S 2 9 D 3 C8 D 3 6 D S 2 9 E 3 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 D S 2 9 A 3 C8 D 4 0 D S 2 9 B 3 C8 D 4 0 D S 2 9 C 3 C8 D 4 0 D S 2 9 D 3 C8 D 4 0 D S 2 9 E 3 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 D S 2 9 A 3 C8 D 4 3 D S 2 9 B 3 C8 D 4 3 D S 2 9 C 3 C8 D 4 3 D S 2 9 D 3 C8 D 4 3 D S 2 9 E 3 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 D S 2 9 A 3 C8 D 5 0 D S 2 9 B 3 C8 D 5 0 D S 2 9 C 3 C8 D 5 0 D S 2 9 D 3 C8 D 5 0 D S 2 9 E 3 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 D S 2 9 A 3 C8 D 6 0 D S 2 9 B 3 C8 D 6 0 D S 2 9 C 3 C8 D 6 0 D S 2 9 D 3 C8 D 6 0 D S 2 9 E 3 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 32 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors 100 x .200 [2.54 x 5.08], .510 [12.95] and .395 [10.03] Card Slot Depth, Full Scoop Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified Accepts [.30.5347 ttoo .10.7810] Thk. PC Board by Canadian Standards Association, File No. LR49571 Physical Properties: Insulation Resistance— 5000 megohms minimum. Insertion/Withdrawal Force (Daughter Card)—8 oz./2 oz. .180 [35.6 N/ 8.9 N] average contact pair [4.57] using .0620 [1.57] steel blade. Insulator Body—Glass filled A thermoplastic, UL rating 94V-O. High temp. plastic option is available; add B suffix M399 to part number. C Color—Black .02 [.51] Contact Gap Contacts—High strength copper alloy. .390 Contact Plating—.000050 [0.00127] [9.91] nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] .100 minimum [2.54] Electrical Properties: Operation Voltage—600 VDC (sea level) Card Slot .705 Depth Current Rating—3 Amperes [17.91] Initial Contact Resistance— 10 milliohms Environmental Properties: Operating Temperature— -55˚C to +125˚C C .180 Temperature Cycling— [4.57] MIL-STD-202 method 107 Vibration—MIL-STD-202 method 204 Related Product Data Dim C .040±.003 Daughter Card Edge Pattern— [1.02±.08] Dia. page 57 .200 [5.08] .100 [2.54] 33 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row Full Scoop No. of Dual Di m e n s i o n s Acquired Part Readout Pos. A B C Nu m b e r .510" [12.95] Card Slot Depth 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 W8 D 1 8 D S 2 9 0 6 3 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 W8 D 2 0 D S 2 9 0 6 3 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 W8 D 2 2 D S 2 9 0 6 3 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 W8 D 2 5 D S 2 9 0 6 3 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 W8 D 2 8 D S 2 9 0 6 3 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 W8 D 3 0 D S 2 9 0 6 3 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 W8 D 3 5 D S 2 9 0 6 3 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 W8 D 3 6 D S 2 9 0 6 3 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 W8 D 4 0 D S 2 9 0 6 3 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 W8 D 4 3 D S 2 9 0 6 3 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 W8 D 4 5 D S 2 9 0 6 3 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 W8 D 5 0 D S 2 9 0 6 3 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 W8 D 6 0 D S 2 9 0 6 3 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 .395" [10.03] Card Slot Depth 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 W8 D 1 8 D S 2 9 0 9 3 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 W8 D 2 0 D S 2 9 0 9 3 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 W8 D 2 2 D S 2 9 0 9 3 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 W8 D 2 5 D S 2 9 0 9 3 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 W8 D 2 8 D S 2 9 0 9 3 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 W8 D 3 0 D S 2 9 0 9 3 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 W8 D 3 5 D S 2 9 0 9 3 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 W8 D 3 6 D S 2 9 0 9 3 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 W8 D 4 0 D S 2 9 0 9 3 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 W8 D 4 3 D S 2 9 0 9 3 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 W8 D 4 5 D S 2 9 0 9 3 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 W8 D 5 0 D S 2 9 0 9 3 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 W8 D 6 0 D S 2 9 0 9 3 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 34 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors .125 x .250 [3.18 x 6.35] Centerline, Dip Solder Tails, .300 [7.62] Card Slot Depth Product Facts nRecognized under the Component Program of Underwriters .020±.010Contact Gap [.51±.25] Laboratories Inc., File No. E60980 [.31.4658] .300 Card Slot Depth [7.62] nCertified by Canadian Standards Association, J File No. LR49571 D .250 [6.35] E Physical Properties: Insulation Resistance— 5000 megohms minimum. .370 Insertion/Withdrawal Force [9.40] (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. .100 Typ. Insulator Body—Glass filled [2.54] thermoplastic, UL rating 94V-O. High B temp. plastic option is available; add suffix M399 to part number. Color—Black A Contacts—High strength copper alloy. C Contact Plating—.000050 [0.00127] .250 nickel underplate with .000030 [6.35] [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .610 [15.49] Electrical Properties: Operation Voltage—1000 VDC (sea level) .060 .180 Current Rating—3 Amperes [1.52][4.57] Initial Contact Resistance— .020 Typ. Dia. 10 milliohms E [0.51] Environmental Properties: Operating Temperature— Dim B -55˚C to +125˚C Dim E TMeILm-SpTeDra-2tu0r2e m Ceythcolidn 1g0—7 .[132.285] Dia. .[014.002±±.0.0083] Dia. Vibration—MIL-STD-202 method 204 Related Product Data: .250 Daughter Card Edge Pattern— [6.35] page 57 .125 [3.18] Mounting Styles .125 [3.18] Dia. #4-40 .125 [3.18] Dia. .250 .250 [6.35] [6.35] Centered Mounting Ear Centered Mounting Ear Flush Mounting Ear Flush Mounting Ear No Mounting Ears .125 [3.18] Thru Hole 4-40 Threaded Insert .125 [3.18] Thru Hole 4-40 Threaded Insert 35 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .250" [6.35] Row-to-Row Mounting Ear Options No. of Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Du a l Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Re a d o u t A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Po s i t i o n s Thru Hole in s e r t Thru Hole in s e r t Tail Length .130 [3.30] (DIM. “J”) 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 D S 2 9 A 1 C7 D 0 6 D S 2 9 B 1 C7 D 0 6 D S 2 9 C 1 C7 D 0 6 D S 2 9 D 1 C7 D 0 6 D S 2 9 E 1 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 D S 2 9 A 1 C7 D 1 0 D S 2 9 B 1 C7 D 1 0 D S 2 9 C 1 C7 D 1 0 D S 2 9 D 1 C7 D 1 0 D S 2 9 E 1 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 D S 2 9 A 1 C7 D 1 5 D S 2 9 B 1 C7 D 1 5 D S 2 9 C 1 C7 D 1 5 D S 2 9 D 1 C7 D 1 5 D S 2 9 E 1 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 D S 2 9 A 1 C7 D 1 8 D S 2 9 B 1 C7 D 1 8 D S 2 9 C 1 C7 D 1 8 D S 2 9 D 1 C7 D 1 8 D S 2 9 E 1 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 D S 2 9 A 1 C7 D 2 2 D S 2 9 B 1 C7 D 2 2 D S 2 9 C 1 C7 D 2 2 D S 2 9 D 1 C7 D 2 2 D S 2 9 E 1 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 D S 2 9 A 1 C7 D 2 5 D S 2 9 B 1 C7 D 2 5 D S 2 9 C 1 C7 D 2 5 D S 2 9 D 1 C7 D 2 5 D S 2 9 E 1 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 D S 2 9 A 1 C7 D 2 8 D S 2 9 B 1 C7 D 2 8 D S 2 9 C 1 C7 D 2 8 D S 2 9 D 1 C7 D 2 8 D S 2 9 E 1 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 D S 2 9 A 1 C7 D 3 0 D S 2 9 B 1 C7 D 3 0 D S 2 9 C 1 C7 D 3 0 D S 2 9 D 1 C7 D 3 0 D S 2 9 E 1 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 6 8 0 4. 4 2 0 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 D S 2 9 A 1 C7 D 3 1 D S 2 9 B 1 C7 D 3 1 D S 2 9 C 1 C7 D 3 1 D S 2 9 D 1 C7 D 3 1 D S 2 9 E 1 11 8 . 8 7 11 2 . 2 7 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 D S 2 9 A 1 C7 D 3 5 D S 2 9 B 1 C7 D 3 5 D S 2 9 C 1 C7 D 3 5 D S 2 9 D 1 C7 D 3 5 D S 2 9 E 1 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 D S 2 9 A 1 C7 D 3 6 D S 2 9 B 1 C7 D 3 6 D S 2 9 C 1 C7 D 3 6 D S 2 9 D 1 C7 D 3 6 D S 2 9 E 1 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 D S 2 9 A 1 C7 D 4 0 D S 2 9 B 1 C7 D 4 0 D S 2 9 C 1 C7 D 4 0 D S 2 9 D 1 C7 D 4 0 D S 2 9 E 1 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 D S 2 9 A 1 C7 D 4 3 D S 2 9 B 1 C7 D 4 3 D S 2 9 C 1 C7 D 4 3 D S 2 9 D 1 C7 D 4 3 D S 2 9 E 1 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 D S 2 9 A 1 C7 D 5 0 D S 2 9 B 1 C7 D 5 0 D S 2 9 C 1 C7 D 5 0 D S 2 9 D 1 C7 D 5 0 D S 2 9 E 1 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 Tail Length .160 [4.06] (DIM. “J”) 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 D S 2 9 A 3 C7 D 0 6 D S 2 9 B 3 C7 D 0 6 D S 2 9 C 3 C7 D 0 6 D S 2 9 D 3 C7 D 0 6 D S 2 9 E 3 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 D S 2 9 A 3 C7 D 1 0 D S 2 9 B 3 C7 D 1 0 D S 2 9 C 3 C7 D 1 0 D S 2 9 D 3 C7 D 1 0 D S 2 9 E 3 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 D S 2 9 A 3 C7 D 1 5 D S 2 9 B 3 C7 D 1 5 D S 2 9 C 3 C7 D 1 5 D S 2 9 D 3 C7 D 1 5 D S 2 9 E 3 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 D S 2 9 A 3 C7 D 1 8 D S 2 9 B 3 C7 D 1 8 D S 2 9 C 3 C7 D 1 8 D S 2 9 D 3 C7 D 1 8 D S 2 9 E 3 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 D S 2 9 A 3 C7 D 2 2 D S 2 9 B 3 C7 D 2 2 D S 2 9 C 3 C7 D 2 2 D S 2 9 D 3 C7 D 2 2 D S 2 9 E 3 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 D S 2 9 A 3 C7 D 2 5 D S 2 9 B 3 C7 D 2 5 D S 2 9 C 3 C7 D 2 5 D S 2 9 D 3 C7 D 2 5 D S 2 9 E 3 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 D S 2 9 A 3 C7 D 2 8 D S 2 9 B 3 C7 D 2 8 D S 2 9 C 3 C7 D 2 8 D S 2 9 D 3 C7 D 2 8 D S 2 9 E 3 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 D S 2 9 A 3 C7 D 3 0 D S 2 9 B 3 C7 D 3 0 D S 2 9 C 3 C7 D 3 0 D S 2 9 D 3 C7 D 3 0 D S 2 9 E 3 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 6 8 0 4. 4 2 0 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 D S 2 9 A 3 C7 D 3 1 D S 2 9 B 3 C7 D 3 1 D S 2 9 C 3 C7 D 3 1 D S 2 9 D 3 C7 D 3 1 D S 2 9 E 3 11 8 . 8 7 11 2 . 2 7 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 D S 2 9 A 3 C7 D 3 5 D S 2 9 B 3 C7 D 3 5 D S 2 9 C 3 C7 D 3 5 D S 2 9 D 3 C7 D 3 5 D S 2 9 E 3 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 D S 2 9 A 3 C7 D 3 6 D S 2 9 B 3 C7 D 3 6 D S 2 9 C 3 C7 D 3 6 D S 2 9 D 3 C7 D 3 6 D S 2 9 E 3 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 D S 2 9 A 3 C7 D 4 0 D S 2 9 B 3 C7 D 4 0 D S 2 9 C 3 C7 D 4 0 D S 2 9 D 3 C7 D 4 0 D S 2 9 E 3 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 D S 2 9 A 3 C7 D 4 3 D S 2 9 B 3 C7 D 4 3 D S 2 9 C 3 C7 D 4 3 D S 2 9 D 3 C7 D 4 3 D S 2 9 E 3 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 D S 2 9 A 3 C7 D 5 0 D S 2 9 B 3 C7 D 5 0 D S 2 9 C 3 C7 D 5 0 D S 2 9 D 3 C7 D 5 0 D S 2 9 E 3 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 36 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .250" [6.35] Row-to-Row Mounting Ear Options No. of Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Du a l Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Re a d o u t A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Po s i t i o n s Thru Hole in s e r t Thru Hole in s e r t Tail Length .220 [5.59] (DIM. “J”) 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 D S 2 9 A 4 C7 D 0 6 D S 2 9 B 4 C7 D 0 6 D S 2 9 C 4 C7 D 0 6 D S 2 9 D 4 C7 D 0 6 D S 2 9 E 4 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 D S 2 9 A 4 C7 D 1 0 D S 2 9 B 4 C7 D 1 0 D S 2 9 C 4 C7 D 1 0 D S 2 9 D 4 C7 D 1 0 D S 2 9 E 4 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 D S 2 9 A 4 C7 D 1 5 D S 2 9 B 4 C7 D 1 5 D S 2 9 C 4 C7 D 1 5 D S 2 9 D 4 C7 D 1 5 D S 2 9 E 4 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 D S 2 9 A 4 C7 D 1 8 D S 2 9 B 4 C7 D 1 8 D S 2 9 C 4 C7 D 1 8 D S 2 9 D 4 C7 D 1 8 D S 2 9 E 4 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 D S 2 9 A 4 C7 D 2 2 D S 2 9 B 4 C7 D 2 2 D S 2 9 C 4 C7 D 2 2 D S 2 9 D 4 C7 D 2 2 D S 2 9 E 4 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 D S 2 9 A 4 C7 D 2 5 D S 2 9 B 4 C7 D 2 5 D S 2 9 C 4 C7 D 2 5 D S 2 9 D 4 C7 D 2 5 D S 2 9 E 4 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 D S 2 9 A 4 C7 D 2 8 D S 2 9 B 4 C7 D 2 8 D S 2 9 C 4 C7 D 2 8 D S 2 9 D 4 C7 D 2 8 D S 2 9 E 4 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 D S 2 9 A 4 C7 D 3 0 D S 2 9 B 4 C7 D 3 0 D S 2 9 C 4 C7 D 3 0 D S 2 9 D 4 C7 D 3 0 D S 2 9 E 4 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 6 8 0 4. 4 2 0 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 D S 2 9 A 4 C7 D 3 1 D S 2 9 B 4 C7 D 3 1 D S 2 9 C 4 C7 D 3 1 D S 2 9 D 4 C7 D 3 1 D S 2 9 E 4 11 8 . 8 7 11 2 . 2 7 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 D S 2 9 A 4 C7 D 3 5 D S 2 9 B 4 C7 D 3 5 D S 2 9 C 4 C7 D 3 5 D S 2 9 D 4 C7 D 3 5 D S 2 9 E 4 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 D S 2 9 A 4 C7 D 3 6 D S 2 9 B 4 C7 D 3 6 D S 2 9 C 4 C7 D 3 6 D S 2 9 D 4 C7 D 3 6 D S 2 9 E 4 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 D S 2 9 A 4 C7 D 4 0 D S 2 9 B 4 C7 D 4 0 D S 2 9 C 4 C7 D 4 0 D S 2 9 D 4 C7 D 4 0 D S 2 9 E 4 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 D S 2 9 A 4 C7 D 4 3 D S 2 9 B 4 C7 D 4 3 D S 2 9 C 4 C7 D 4 3 D S 2 9 D 4 C7 D 4 3 D S 2 9 E 4 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 D S 2 9 A 4 C7 D 5 0 D S 2 9 B 4 C7 D 5 0 D S 2 9 C 4 C7 D 5 0 D S 2 9 D 4 C7 D 5 0 D S 2 9 E 4 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 37 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series .156 x .200 [3.96 x 5.08] Centerline, Dip Solder Tails, .300 [7.62] Card Slot Depth Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., .020±.010Contact Gap [.51±.25] File No. E60980 nCertified [3.1.6485] .300 Card Slot Depth by Canadian [7.62] Standards Association, File No. LR49571 D J .200 E [5.08] Physical Properties: Insulation Resistance—5000 megohms minimum. Insertion/Withdrawal Force .370 (Daughter Card)—8 oz./2 oz. [9.40] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled .156 Typ. [3.96] thermoplastic, UL rating 94V-O. High temp. plastic option is available; add B suffix M399 to part number. Color—Black A Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] C nickel underplate with .000030 .250 [0.00076] gold in the mating area, [6.35] tin/lead on tails, .000100 [0.00254] minimum .610 Electrical Properties: [15.49] Operation Voltage—1500 VDC (sea level) .060 .180 Current Rating—3 Amperes [1.52] [4.57] Initial Contact Resistance— 10 milliohms [.00.2501] Typ. Dia. E Environmental Properties: Operating Temperature— Dim B -55˚C to +125˚C Temperature Cycling— Dim E MIL-STD-202 method 107 [.31.2285] Dia. .[014.002±±.0.0083] Dia. Vibration—MIL-STD-202 method 204 Related Product Data: Daughter Card Edge Pattern— .200 [5.08] page 57 .156 [3.96] Mounting Styles .125 [3.18] Dia. #4-40 .125 [3.18] Dia. .250 .250 [6.35] [6.35] Centered Mounting Ear Centered Mounting Ear Flush Mounting Ear Flush Mounting Ear No Mounting Ears .125 [3.18] Thru Hole 4-40 Threaded Insert .125 [3.18] Thru Hole 4-40 Threaded Insert 38 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .156" [3.96] Centerline / .200" [5.08] Row-to-Row Mounting Ear Options No. of Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Du a l Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Re a d o u t A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Po s i t i o n s Thru Hole in s e r t Thru Hole in s e r t Tail Length .130 [3.30] (DIM. “J”) 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 D S 2 9 A 1 C6 D 0 6 D S 2 9 B 1 C6 D 0 6 D S 2 9 C 1 C6 D 0 6 D S 2 9 D 1 C6 D 0 6 D S 2 9 E 1 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 D S 2 9 A 1 C6 D 1 0 D S 2 9 B 1 C6 D 1 0 D S 2 9 C 1 C6 D 1 0 D S 2 9 D 1 C6 D 1 0 D S 2 9 E 1 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 D S 2 9 A 1 C6 D 1 2 D S 2 9 B 1 C6 D 1 2 D S 2 9 C 1 C6 D 1 2 D S 2 9 D 1 C6 D 1 2 D S 2 9 E 1 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 D S 2 9 A 1 C6 D 1 5 D S 2 9 B 1 C6 D 1 5 D S 2 9 C 1 C6 D 1 5 D S 2 9 D 1 C6 D 1 5 D S 2 9 E 1 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 D S 2 9 A 1 C6 D 1 8 D S 2 9 B 1 C6 D 1 8 D S 2 9 C 1 C6 D 1 8 D S 2 9 D 1 C6 D 1 8 D S 2 9 E 1 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 9 6 8 3. 7 1 8 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 D S 2 9 A 1 C6 D 2 0 D S 2 9 B 1 C6 D 2 0 D S 2 9 C 1 C6 D 2 0 D S 2 9 D 1 C6 D 2 0 D S 2 9 E 1 10 0 . 7 9 94 . 4 4 86 . 4 9 83 . 4 1 75 . 2 9 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 5 3. 2 7 6 C6 D 2 2 D S 2 9 A 1 C6 D 2 2 D S 2 9 B 1 C6 D 2 2 D S 2 9 C 1 C6 D 2 2 D S 2 9 D 1 C6 D 2 2 D S 2 9 E 1 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 1 83 . 2 1 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 D S 2 9 A 1 C6 D 2 5 D S 2 9 B 1 C6 D 2 5 D S 2 9 C 1 C6 D 2 5 D S 2 9 D 1 C6 D 2 5 D S 2 9 E 1 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 D S 2 9 A 1 C6 D 2 8 D S 2 9 B 1 C6 D 2 8 D S 2 9 C 1 C6 D 2 8 D S 2 9 D 1 C6 D 2 8 D S 2 9 E 1 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 5. 5 2 8 5. 2 7 8 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 D S 2 9 A 1 C6 D 3 0 D S 2 9 B 1 C6 D 3 0 D S 2 9 C 1 C6 D 3 0 D S 2 9 D 1 C6 D 3 0 D S 2 9 E 1 14 0 . 4 1 13 4 . 0 6 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 6 8 4 5. 4 3 4 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 D S 2 9 A 1 C6 D 3 1 D S 2 9 B 1 C6 D 3 1 D S 2 9 C 1 C6 D 3 1 D S 2 9 D 1 C6 D 3 1 D S 2 9 E 1 14 4 . 3 7 13 8 . 0 2 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 6. 3 0 8 6. 0 5 8 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 D S 2 9 A 1 C6 D 3 5 D S 2 9 B 1 C6 D 3 5 D S 2 9 C 1 C6 D 3 5 D S 2 9 D 1 C6 D 3 5 D S 2 9 E 1 16 0 . 2 2 15 3 . 8 7 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 D S 2 9 A 1 C6 D 3 6 D S 2 9 B 1 C6 D 3 6 D S 2 9 C 1 C6 D 3 6 D S 2 9 D 1 C6 D 3 6 D S 2 9 E 1 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 7. 0 8 8 6. 8 3 8 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 D S 2 9 A 1 C6 D 4 0 D S 2 9 B 1 C6 D 4 0 D S 2 9 C 1 C6 D 4 0 D S 2 9 D 1 C6 D 4 0 D S 2 9 E 1 18 0 . 0 4 17 3 . 6 9 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 D S 2 9 A 1 C6 D 4 3 D S 2 9 B 1 C6 D 4 3 D S 2 9 C 1 C6 D 4 3 D S 2 9 D 1 C6 D 4 3 D S 2 9 E 1 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 50 8. 6 4 8 8. 3 9 8 8. 0 8 5 7. 9 6 4 7. 6 4 4 C6 D 5 0 D S 2 9 A 1 C6 D 5 0 D S 2 9 B 1 C6 D 5 0 D S 2 9 C 1 C6 D 5 0 D S 2 9 D 1 C6 D 5 0 D S 2 9 E 1 21 9 . 6 6 21 3 . 3 1 20 5 . 3 6 20 2 . 2 9 19 4 . 1 6 Tail Length .160 [4.06] (DIM. “J”) 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 D S 2 9 A 3 C6 D 0 6 D S 2 9 B 3 C6 D 0 6 D S 2 9 C 3 C6 D 0 6 D S 2 9 D 3 C6 D 0 6 D S 2 9 E 3 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 D S 2 9 A 3 C6 D 1 0 D S 2 9 B 3 C6 D 1 0 D S 2 9 C 3 C6 D 1 0 D S 2 9 D 3 C6 D 1 0 D S 2 9 E 3 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 D S 2 9 A 3 C6 D 1 2 D S 2 9 B 3 C6 D 1 2 D S 2 9 C 3 C6 D 1 2 D S 2 9 D 3 C6 D 1 2 D S 2 9 E 3 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 D S 2 9 A 3 C6 D 1 5 D S 2 9 B 3 C6 D 1 5 D S 2 9 C 3 C6 D 1 5 D S 2 9 D 3 C6 D 1 5 D S 2 9 E 3 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 D S 2 9 A 3 C6 D 1 8 D S 2 9 B 3 C6 D 1 8 D S 2 9 C 3 C6 D 1 8 D S 2 9 D 3 C6 D 1 8 D S 2 9 E 3 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 9 6 8 3. 7 1 8 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 D S 2 9 A 3 C6 D 2 0 D S 2 9 B 3 C6 D 2 0 D S 2 9 C 3 C6 D 2 0 D S 2 9 D 3 C6 D 2 0 D S 2 9 E 3 10 0 . 7 9 94 . 4 4 86 . 4 9 83 . 4 1 75 . 2 9 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 5 3. 2 7 6 C6 D 2 2 D S 2 9 A 3 C6 D 2 2 D S 2 9 B 3 C6 D 2 2 D S 2 9 C 3 C6 D 2 2 D S 2 9 D 3 C6 D 2 2 D S 2 9 E 3 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 1 83 . 2 1 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 D S 2 9 A 3 C6 D 2 5 D S 2 9 B 3 C6 D 2 5 D S 2 9 C 3 C6 D 2 5 D S 2 9 D 3 C6 D 2 5 D S 2 9 E 3 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 D S 2 9 A 3 C6 D 2 8 D S 2 9 B 3 C6 D 2 8 D S 2 9 C 3 C6 D 2 8 D S 2 9 D 3 C6 D 2 8 D S 2 9 E 3 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 5. 5 2 8 5. 2 7 8 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 D S 2 9 A 3 C6 D 3 0 D S 2 9 B 3 C6 D 3 0 D S 2 9 C 3 C6 D 3 0 D S 2 9 D 3 C6 D 3 0 D S 2 9 E 3 14 0 . 4 1 13 4 . 0 6 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 6 8 4 5. 4 3 4 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 D S 2 9 A 3 C6 D 3 1 D S 2 9 B 3 C6 D 3 1 D S 2 9 C 3 C6 D 3 1 D S 2 9 D 3 C6 D 3 1 D S 2 9 E 3 14 4 . 3 7 13 8 . 0 2 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 6. 3 0 8 6. 0 5 8 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 D S 2 9 A 3 C6 D 3 5 D S 2 9 B 3 C6 D 3 5 D S 2 9 C 3 C6 D 3 5 D S 2 9 D 3 C6 D 3 5 D S 2 9 E 3 16 0 . 2 2 15 3 . 8 7 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 D S 2 9 A 3 C6 D 3 6 D S 2 9 B 3 C6 D 3 6 D S 2 9 C 3 C6 D 3 6 D S 2 9 D 3 C6 D 3 6 D S 2 9 E 3 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 7. 0 8 8 6. 8 3 8 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 D S 2 9 A 3 C6 D 4 0 D S 2 9 B 3 C6 D 4 0 D S 2 9 C 3 C6 D 4 0 D S 2 9 D 3 C6 D 4 0 D S 2 9 E 3 18 0 . 0 4 17 3 . 6 9 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 D S 2 9 A 3 C6 D 4 3 D S 2 9 B 3 C6 D 4 3 D S 2 9 C 3 C6 D 4 3 D S 2 9 D 3 C6 D 4 3 D S 2 9 E 3 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 50 8. 6 4 8 8. 3 9 8 8. 0 8 5 7. 9 6 4 7. 6 4 4 C6 D 5 0 D S 2 9 A 3 C6 D 5 0 D S 2 9 B 3 C6 D 5 0 D S 2 9 C 3 C6 D 5 0 D S 2 9 D 3 C6 D 5 0 D S 2 9 E 3 21 9 . 6 6 21 3 . 3 1 20 5 . 3 6 20 2 . 2 9 19 4 . 1 6 39 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .156" [3.96] Centerline / .200" [5.08] Row-to-Row Mounting Ear Options No. of Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Du a l Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Re a d o u t A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Po s i t i o n s T h r uH o l e in s e r t Thru Hole in s e r t Tail Length .220" [5.59] (DIM. “J”) 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 D S 2 9 A 4 C6 D 0 6 D S 2 9 B 4 C6 D 0 6 D S 2 9 C 4 C6 D 0 6 D S 2 9 D 4 C6 D 0 6 D S 2 9 E 4 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 D S 2 9 A 4 C6 D 1 0 D S 2 9 B 4 C6 D 1 0 D S 2 9 C 4 C6 D 1 0 D S 2 9 D 4 C6 D 1 0 D S 2 9 E 4 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 D S 2 9 A 4 C6 D 1 2 D S 2 9 B 4 C6 D 1 2 D S 2 9 C 4 C6 D 1 2 D S 2 9 D 4 C6 D 1 2 D S 2 9 E 4 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 D S 2 9 A 4 C6 D 1 5 D S 2 9 B 4 C6 D 1 5 D S 2 9 C 4 C6 D 1 5 D S 2 9 D 4 C6 D 1 5 D S 2 9 E 4 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 D S 2 9 A 4 C6 D 1 8 D S 2 9 B 4 C6 D 1 8 D S 2 9 C 4 C6 D 1 8 D S 2 9 D 4 C6 D 1 8 D S 2 9 E 4 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 9 6 8 3. 7 1 8 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 D S 2 9 A 4 C6 D 2 0 D S 2 9 B 4 C6 D 2 0 D S 2 9 C 4 C6 D 2 0 D S 2 9 D 4 C6 D 2 0 D S 2 9 E 4 10 0 . 7 9 94 . 4 4 86 . 4 9 83 . 4 1 75 . 2 9 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 5 3. 2 7 6 C6 D 2 2 D S 2 9 A 4 C6 D 2 2 D S 2 9 B 4 C6 D 2 2 D S 2 9 C 4 C6 D 2 2 D S 2 9 D 4 C6 D 2 2 D S 2 9 E 4 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 1 83 . 2 1 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 D S 2 9 A 4 C6 D 2 5 D S 2 9 B 4 C6 D 2 5 D S 2 9 C 4 C6 D 2 5 D S 2 9 D 4 C6 D 2 5 D S 2 9 E 4 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 D S 2 9 A 4 C6 D 2 8 D S 2 9 B 4 C6 D 2 8 D S 2 9 C 4 C6 D 2 8 D S 2 9 D 4 C6 D 2 8 D S 2 9 E 4 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 5. 5 2 8 5. 2 7 8 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 D S 2 9 A 4 C6 D 3 0 D S 2 9 B 4 C6 D 3 0 D S 2 9 C 4 C6 D 3 0 D S 2 9 D 4 C6 D 3 0 D S 2 9 E 4 14 0 . 4 1 13 4 . 0 6 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 6 8 4 5. 4 3 4 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 D S 2 9 A 4 C6 D 3 1 D S 2 9 B 4 C6 D 3 1 D S 2 9 C 4 C6 D 3 1 D S 2 9 D 4 C6 D 3 1 D S 2 9 E 4 14 4 . 3 7 13 8 . 0 2 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 6. 3 0 8 6. 0 5 8 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 D S 2 9 A 4 C6 D 3 5 D S 2 9 B 4 C6 D 3 5 D S 2 9 C 4 C6 D 3 5 D S 2 9 D 4 C6 D 3 5 D S 2 9 E 4 16 0 . 2 2 15 3 . 8 7 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 D S 2 9 A 4 C6 D 3 6 D S 2 9 B 4 C6 D 3 6 D S 2 9 C 4 C6 D 3 6 D S 2 9 D 4 C6 D 3 6 D S 2 9 E 4 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 7. 0 8 8 6. 8 3 8 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 D S 2 9 A 4 C6 D 4 0 D S 2 9 B 4 C6 D 4 0 D S 2 9 C 4 C6 D 4 0 D S 2 9 D 4 C6 D 4 0 D S 2 9 E 4 18 0 . 0 4 17 3 . 6 9 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 D S 2 9 A 4 C6 D 4 3 D S 2 9 B 4 C6 D 4 3 D S 2 9 C 4 C6 D 4 3 D S 2 9 D 4 C6 D 4 3 D S 2 9 E 4 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 50 8. 6 4 8 8. 3 9 8 8. 0 8 5 7. 9 6 4 7. 6 4 4 C6 D 5 0 D S 2 9 A 4 C6 D 5 0 D S 2 9 B 4 C6 D 5 0 D S 2 9 C 4 C6 D 5 0 D S 2 9 D 4 C6 D 5 0 D S 2 9 E 4 21 9 . 6 6 21 3 . 3 1 20 5 . 3 6 20 2 . 2 9 19 4 . 1 6 40 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Card Edge Connectors Product Facts n Sizes from 6 to 65 dual positions. n Contact mating surface optimizes reliability by concentrating the normal force in the actual contact area. n Mounting ear options accommodate both Panel and PC Board attachment. n Solder stand-offs facilitate cleaning. n Bifurcated contact design provides redundant points of contact to maximize reliability. n Tail lengths available to accommodate .062" [1.57] through .125" Bifurcated contact design provides maximum reliability [3.18] thick PCB Boards and Wire Wrap Description/Application termination. The modified bellows card n Straight or Right Angle edge connectors are dual contact configurations. readout and are designed for reliable termination to double sided PCB boards. Modified Bellows The modified bellows card edge connector offers a variety of tail lengths for sol- der and wire wrap applica- tions. Contacts are available in straight tail or right angle configurations to meet your individual pur- pose. The modified bellows line of connectors offers a variety of card slot depths and has optional high tem- perature plastic insulators. 41 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .100 x .200 [2.54 x 5.08], Straight Dip Solder And Wire Wrap Tails Product Facts nRecognized under the [.10.5347 -- .10.7810] P.C. Board Component Program of Underwriters .300 Laboratories Inc., [7.62] Card Depth .610 File No. E60980 [15.49] nCertified by Canadian Standards Association, File No. LR49571 SECTION X-X J ROTATED 90º Physical Properties: Insulation Resistance—5000 megohms minimum. .200 Insertion/Withdrawal Force [5.08] .025 (Daughter Card)—8 oz./2 oz. [.64] Sq [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled thermoplastic, UL rating 94V-O. High C temp. plastic option is available; add suffix M399 to part number. D Color—Black Contacts—High strength copper alloy. .368 [2.1.5040] Ref. Contact Plating—.000050 [0.00127] [9.53] SECTION X-X nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: Operation Voltage—600 VDC E (sea level) B Current Rating—3 Amperes A Initial Contact Resistance— 10 milliohms Environmental Properties: Operating Temperature— -55˚C to +125˚C Dim B Temperature Cycling— MIL-STD-202 method 107 .128 Dim E Vibration—MIL-STD-202 method 204 [3.25] Dia. Related Product Data: Polarization Key—page 57 .200 [5.08] Daughter Card Edge Pattern— ..110000 [2.54] page 57 P=.040 [1.02] Dip Solder Applications P=.042 [1.07] For Wire Wrap Applications Mounting Styles .250 [6.35] .610 [15.49] Ref. Centered Mounting Ear Centered Mounting Ear No Mounting Ears Flush Mounting Ear Flush Mounting Ear .180 .125 [3.18] Thru Hole 4-40 Threaded Insert .125 [3.18] Thru Hole 4-40 Threaded Insert [4.57] 42 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Ce n t e r e d No Flush Fl u s h Re a d o u t A B C D E Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Thru Hole in s e r t Thru Hole in s e r t Tail Length .160" [4.06] (DIM “J”) 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 A8 D 1 0 D S 2 9 A 2 A8 D 1 0 D S 2 9 B 2 A8 D 1 0 D S 2 9 C 2 A8 D 1 0 D S 2 9 D 2 A8 D 1 0 D S 2 9 E 2 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 A8 D 1 2 D S 2 9 A 2 A8 D 1 2 D S 2 9 B 2 A8 D 1 2 D S 2 9 C 2 — — 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 A8 D 1 5 D S 2 9 A 2 A8 D 1 5 D S 2 9 B 2 A8 D 1 5 D S 2 9 C 2 A8 D 1 5 D S 2 9 D 2 A8 D 1 5 D S 2 9 E 2 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 A8 D 1 8 D S 2 9 A 2 A8 D 1 8 D S 2 9 B 2 A8 D 1 8 D S 2 9 C 2 A8 D 1 8 D S 2 9 D 2 A8 D 1 8 D S 2 9 E 2 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 A8 D 2 0 D S 2 9 A 2 A8 D 2 0 D S 2 9 B 2 A8 D 2 0 D S 2 9 C 2 – – 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 A8 D 2 2 D S 2 9 A 2 A8 D 2 2 D S 2 9 B 2 A8 D 2 2 D S 2 9 C 2 – – 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 A8 D 2 5 D S 2 9 A 2 A8 D 2 5 D S 2 9 B 2 A8 D 2 5 D S 2 9 C 2 A8 D 2 5 D S 2 9 D 2 A8 D 2 5 D S 2 9 E 2 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 A8 D 2 8 D S 2 9 A 2 A8 D 2 8 D S 2 9 B 2 A8 D 2 8 D S 2 9 C 2 – – 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 A8 D 3 0 D S 2 9 A 2 A8 D 3 0 D S 2 9 B 2 A8 D 3 0 D S 2 9 C 2 A8 D 3 0 D S 2 9 D 2 A8 D 3 0 D S 2 9 E 2 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 1 0 0 A8 D 3 1 D S 2 9 A 2 A8 D 3 1 D S 2 9 B 2 A8 D 3 1 D S 2 9 C 2 A8 D 3 1 D S 2 9 D 2 A8 D 3 1 D S 2 9 E 2 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 78 . 7 4 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 A8 D 3 5 D S 2 9 A 2 A8 D 3 5 D S 2 9 B 2 A8 D 3 5 D S 2 9 C 2 – – 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 A8 D 3 6 D S 2 9 A 2 A8 D 3 6 D S 2 9 B 2 A8 D 3 6 D S 2 9 C 2 – – 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 A8 D 4 0 D S 2 9 A 2 A8 D 4 0 D S 2 9 B 2 A8 D 4 0 D S 2 9 C 2 – – 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 A8 D 4 3 D S 2 9 A 2 A8 D 4 3 D S 2 9 B 2 A8 D 4 3 D S 2 9 C 2 – – 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 44 5. 2 3 5 4. 9 7 5 4. 6 6 0 4. 5 0 0 4. 3 0 0 A8 D 4 4 D S 2 9 A 2 A8 D 4 4 D S 2 9 B 2 A8 D 4 4 D S 2 9 C 2 – – 13 2 . 9 7 12 6 . 3 7 11 8 . 3 6 11 4 . 3 0 10 9 . 2 2 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 8 0 0 A8 D 5 0 D S 2 9 A 2 A8 D 5 0 D S 2 9 B 2 A8 D 5 0 D S 2 9 C 2 A8 D 5 0 D S 2 9 D 2 A8 D 5 0 D S 2 9 E 2 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 1 . 9 2 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 A8 D 6 0 D S 2 9 A 2 A8 D 6 0 D S 2 9 B 2 A8 D 6 0 D S 2 9 C 2 – – 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 65 7. 3 3 5 7. 0 7 5 6. 7 6 0 6. 6 0 0 6. 4 0 0 A8 D 6 5 D S 2 9 A 2 A8 D 6 5 D S 2 9 B 2 A8 D 6 5 D S 2 9 C 2 A8 D 6 5 D S 2 9 D 2 A8 D 6 5 D S 2 9 E 2 18 6 . 3 1 17 9 . 7 1 17 1 . 7 0 16 7 . 6 4 16 2 . 5 6 Tail Length .220" [5.59] (DIM “J”) 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 A8 D 1 0 D S 2 9 A 3 A8 D 1 0 D S 2 9 B 3 A8 D 1 0 D S 2 9 C 3 A8 D 1 0 D S 2 9 D 3 A8 D 1 0 D S 2 9 E 3 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 A8 D 1 2 D S 2 9 A 3 A8 D 1 2 D S 2 9 B 3 A8 D 1 2 D S 2 9 C 3 – – 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 A8 D 1 5 D S 2 9 A 3 A8 D 1 5 D S 2 9 B 3 A8 D 1 5 D S 2 9 C 3 A8 D 1 5 D S 2 9 D 3 A8 D 1 5 D S 2 9 E 3 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 A8 D 1 8 D S 2 9 A 3 A8 D 1 8 D S 2 9 B 3 A8 D 1 8 D S 2 9 C 3 A8 D 1 8 D S 2 9 D 3 A8 D 1 8 D S 2 9 E 3 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 A8 D 2 0 D S 2 9 A 3 A8 D 2 0 D S 2 9 B 3 A8 D 2 0 D S 2 9 C 3 – – 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 A8 D 2 2 D S 2 9 A 3 A8 D 2 2 D S 2 9 B 3 A8 D 2 2 D S 2 9 C 3 – – 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 A8 D 2 5 D S 2 9 A 3 A8 D 2 5 D S 2 9 B 3 A8 D 2 5 D S 2 9 C 3 A8 D 3 5 D S 2 9 D 3 A8 D 3 5 D S 2 9 E 3 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 A8 D 2 8 D S 2 9 A 3 A8 D 2 8 D S 2 9 B 3 A8 D 2 8 D S 2 9 C 3 – – 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 A8 D 3 0 D S 2 9 A 3 A8 D 3 0 D S 2 9 B 3 A8 D 3 0 D S 2 9 C 3 A8 D 3 0 D S 2 9 D 3 A8 D 3 0 D S 2 9 E 3 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 1 0 0 A8 D 3 1 D S 2 9 A 3 A8 D 3 1 D S 2 9 B 3 A8 D 3 1 D S 2 9 C 3 A8 D 3 1 D S 2 9 D 3 A8 D 3 1 D S 2 9 E 3 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 78 . 7 4 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 A8 D 3 5 D S 2 9 A 3 A8 D 3 5 D S 2 9 B 3 A8 D 3 5 D S 2 9 C 3 – – 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 A8 D 3 6 D S 2 9 A 3 A8 D 3 6 D S 2 9 B 3 A8 D 3 6 D S 2 9 C 3 – – 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 A8 D 4 0 D S 2 9 A 3 A8 D 4 0 D S 2 9 B 3 A8 D 4 0 D S 2 9 C 3 – – 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 A8 D 4 3 D S 2 9 A 3 A8 D 4 3 D S 2 9 B 3 A8 D 4 3 D S 2 9 C 3 – – 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 43 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Ce n t e r e d No Flush Fl u s h Re a d o u t A B C D E Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Thru Hole in s e r t Thru Hole in s e r t Tail Length .220" [5.59] (DIM “J”) (Continued) 44 5. 2 3 5 4. 9 7 5 4. 6 6 0 4. 5 0 0 4. 3 0 0 A8 D 4 4 D S 2 9 A 3 A8 D 4 4 D S 2 9 B 3 A8 D 4 4 D S 2 9 C 3 – – 13 2 . 9 7 12 6 . 3 7 11 8 . 3 6 11 4 . 3 0 10 9 . 2 2 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 8 0 0 A8 D 5 0 D S 2 9 A 3 A8 D 5 0 D S 2 9 B 3 A8 D 5 0 D S 2 9 C 3 A8 D 5 0 D S 2 9 D 3 A8 D 5 0 D S 2 9 E 3 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 1 . 9 2 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 A8 D 6 0 D S 2 9 A 3 A8 D 6 0 D S 2 9 B 3 A8 D 6 0 D S 2 9 C 3 – – 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 65 7. 3 3 5 7. 0 7 5 6. 7 6 0 6. 6 0 0 6. 4 0 0 A8 D 6 5 D S 2 9 A 3 A8 D 6 5 D S 2 9 B 3 A8 D 6 5 D S 2 9 C 3 A8 D 6 5 D S 2 9 D 3 A8 D 6 5 D S 2 9 E 3 18 6 . 3 1 17 9 . 7 1 17 1 . 7 0 16 7 . 6 4 16 2 . 5 6 Tail Length .560" [14.22] (DIM “J”) for Wire Wrap Termination 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 A8 D 1 0 W W 2 9 A 3 A8 D 1 0 W W 2 9 B 3 – – – 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 A8 D 1 2 W W 2 9 A 3 A8 D 1 2 W W 2 9 B 3 – – – 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 A8 D 1 5 W W 2 9 A 3 A8 D 1 5 W W 2 9 B 3 – – – 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 A8 D 1 8 W W 2 9 A 3 A8 D 1 8 W W 2 9 B 3 – – – 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 A8 D 2 0 W W 2 9 A 3 A8 D 2 0 W W 2 9 B 3 – – – 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 A8 D 2 2 W W 2 9 A 3 A8 D 2 2 W W 2 9 B 3 – – – 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 A8 D 2 5 W W 2 9 A 3 A8 D 2 5 W W 2 9 B 3 – – – 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 A8 D 2 8 W W 2 9 A 3 A8 D 2 8 W W 2 9 B 3 – – – 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 A8 D 3 0 W W 2 9 A 3 A8 D 3 0 W W 2 9 B 3 – – – 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 1 0 0 A8 D 3 1 W W 2 9 A 3 A8 D 3 1 W W 2 9 B 3 – – – 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 78 . 7 4 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 A8 D 3 5 W W 2 9 A 3 A8 D 3 5 W W 2 9 B 3 – – – 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 A8 D 3 6 W W 2 9 A 3 A8 D 3 6 W W 2 9 B 3 – – – 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 A8 D 4 0 W W 2 9 A 3 A8 D 4 0 W W 2 9 B 3 – – – 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 A8 D 4 3 W W 2 9 A 3 A8 D 4 3 W W 2 9 B 3 – – – 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 44 5. 2 3 5 4. 9 7 5 4. 6 6 0 4. 5 0 0 4. 3 0 0 A8 D 4 4 W W 2 9 A 3 A8 D 4 4 W W 2 9 B 3 – – – 13 2 . 9 7 12 6 . 3 7 11 8 . 3 6 11 4 . 3 0 10 9 . 2 2 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 8 0 0 A8 D 5 0 W W 2 9 A 3 A8 D 5 0 W W 2 9 B 3 – – – 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 1 . 9 2 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 A8 D 6 0 W W 2 9 A 3 A8 D 6 0 W W 2 9 B 3 – – – 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 65 7. 3 3 5 7. 0 7 5 6. 7 6 0 6. 6 0 0 6. 4 0 0 A8 D 6 5 W W 2 9 A 3 A8 D 6 5 W W 2 9 B 3 – – – 18 6 . 3 1 17 9 . 7 1 17 1 . 7 0 16 7 . 6 4 16 2 . 5 6 44 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .100 x .200 [2.54 x 5.08] and .100 x .150 [2.54 x 3.81] Right Angle Dip Solder Tails Product Facts nRecognized under the .14±.01 Component Program [3.56±.25] of Underwriters .025 Sq. Typ. [.64] Laboratories Inc., File No. E60980 nCertified by Canadian Standards H Association, File No. LR49571 SECTION X-X Physical Properties: ROTATED 90º Insulation Resistance— 5000 megohms minimum. .054±.071 Insertion/Withdrawal Force [1.37±1.890] PC Board (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using C .0620 [1.57] steel blade. Insulator Body—Glass filled D thermoplastic, UL rating 94V-O. High temp. plastic option is available; add suffix M399 to part number. .368 [2.1.5040] Ref. Color—Black [9.35] SECTION X-X Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: E Operation Voltage—600 VDC (sea level) B Current Rating—3 Amperes A Initial Contact Resistance— 10 milliohms Environmental Properties: Dim B Operating Temperature— .128 -55˚C to +125˚C [3.25] Dia. Dim E Temperature Cycling— .040±.003 MIL-STD-202 method 107 [1.02±.08] Dia. Vibration—MIL-STD-202 method 204 Related Product Data: Polarization Key—page 57 Dim G ..110000 Dim H Daughter Card Edge Pattern— Dim K [2.54] Row to Row Spacing page 57 Dim G - Centered Mounting Ear .125 [3.18] Cross Drilled Hole Only Dim K - Flush Mounting Ear .125 [3.18] Cross Drilled Hole Only .250 Mounting Styles [6.35] .250 [6.35] .610 [15.49] Ref. [1.651.409] Ref.[1.651.409] Ref. [4.1.5870] C.e1n2t5e r[3e.d1 8M] oTuhnrtuin Hgo Elear No Mounting Ears .180 Cen.1te2r5e d[3 M.1o8]u Cntrionsgs E ar [6.2.3550] Fl.u1s2h5 [M3o.1u8n] tCinrgo sEsa r [4.57] Drilled Hole Drilled Hole 45 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row (Dim. “H”) Spacing Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Fl u s h Ce n t e r e d No Ce n t e r e d Fl u s h Re a d o u t A B C D E Mo u n t i n g Mo u n t i n g Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s Ear Only Ear Only .125" [3.18] Ea r s .125" [3.18] .125" [3.18] G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 0. 4 7 0 0. 2 9 0 A8 D 1 0 R A 2 9 A A8 D 1 0 R A 2 9 C A8 D 1 0 R A 2 9 E A8 D 1 0 R A 2 9 F 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 11 . 9 4 7. 3 7 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 0. 4 7 0 0. 2 9 0 A8 D 1 2 R A 2 9 A A8 D 1 2 R A 2 9 C A8 D 1 2 R A 2 9 E – 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 11 . 9 4 7. 3 7 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 0. 4 7 0 0. 2 9 0 A8 D 1 5 R A 2 9 A A8 D 1 5 R A 2 9 C A8 D 1 5 R A 2 9 E A8 D 1 5 R A 2 9 F 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 11 . 9 4 7. 3 7 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 0. 4 7 0 0. 2 9 0 A8 D 1 8 R A 2 9 A A8 D 1 8 R A 2 9 C A8 D 1 8 R A 2 9 E A8 D 1 8 R A 2 9 F 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 11 . 9 4 7. 3 7 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 0. 4 7 0 0. 2 9 0 A8 D 2 0 R A 2 9 A A8 D 2 0 R A 2 9 C A8 D 2 0 R A 2 9 E – 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 11 . 9 4 7. 3 7 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 0. 4 7 0 0. 2 9 0 A8 D 2 2 R A 2 9 A A8 D 2 2 R A 2 9 C A8 D 2 2 R A 2 9 E – 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 11 . 9 4 7. 3 7 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 0. 4 7 0 0. 2 9 0 A8 D 2 5 R A 2 9 A A8 D 2 5 R A 2 9 C A8 D 2 5 R A 2 9 E A8 D 2 5 R A 2 9 F 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 11 . 9 4 7. 3 7 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 0. 4 7 0 0. 2 9 0 A8 D 2 8 R A 2 9 A A8 D 2 8 R A 2 9 C A8 D 2 8 R A 2 9 E – 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 11 . 9 4 7. 3 7 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 0. 4 7 0 0. 2 9 0 A8 D 3 0 R A 2 9 A A8 D 3 0 R A 2 9 C A8 D 3 0 R A 2 9 E A8 D 3 0 R A 2 9 F 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 11 . 9 4 7. 3 7 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 1 0 0 0. 4 7 0 0. 2 9 0 A8 D 3 1 R A 2 9 A A8 D 3 1 R A 2 9 C A8 D 3 1 R A 2 9 E A8 D 3 1 R A 2 9 F 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 78 . 7 4 11 . 9 4 7. 3 7 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 0. 4 7 0 0. 2 9 0 A8 D 3 5 R A 2 9 A A8 D 3 5 R A 2 9 C A8 D 3 5 R A 2 9 E – 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 11 . 9 4 7. 3 7 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 0. 4 7 0 0. 2 9 0 A8 D 3 6 R A 2 9 A A8 D 3 6 R A 2 9 C A8 D 3 6 R A 2 9 E – 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 11 . 9 4 7. 3 7 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 0. 4 7 0 0. 2 9 0 A8 D 4 0 R A 2 9 A A8 D 4 0 R A 2 9 C A8 D 4 0 R A 2 9 E – 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 11 . 9 4 7. 3 7 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 0. 4 7 0 0. 2 9 0 A8 D 4 3 R A 2 9 A A8 D 4 3 R A 2 9 C A8 D 4 3 R A 2 9 E – 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 11 . 9 4 7. 3 7 44 5. 2 3 5 4. 9 7 5 4. 6 6 0 4. 5 0 0 4. 3 0 0 0. 4 7 0 0. 2 9 0 A8 D 4 4 R A 2 9 A A8 D 4 4 R A 2 9 C A8 D 4 4 R A 2 9 E – 13 2 . 9 7 12 6 . 3 7 11 8 . 3 6 11 4 . 3 0 10 9 . 2 2 11 . 9 4 7. 3 7 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 8 0 0 0. 4 7 0 0. 2 9 0 A8 D 5 0 R A 2 9 A A8 D 5 0 R A 2 9 C A8 D 5 0 R A 2 9 E A8 D 5 0 R A 2 9 F 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 1 . 9 2 11 . 9 4 7. 3 7 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 0. 4 7 0 0. 2 9 0 A8 D 6 0 R A 2 9 A A8 D 6 0 R A 2 9 C A8 D 6 0 R A 2 9 E – 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 11 . 9 4 7. 3 7 65 7. 3 3 5 7. 0 7 5 6. 7 6 0 6. 6 0 0 6. 4 0 0 0. 4 7 0 0. 2 9 0 A8 D 6 5 R A 2 9 A A8 D 6 5 R A 2 9 C A8 D 6 5 R A 2 9 E A8 D 6 5 R A 2 9 F 18 6 . 3 1 17 9 . 7 1 17 1 . 7 0 16 7 . 6 4 16 2 . 5 6 11 . 9 4 7. 3 7 4466 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .150" [3.81] Row-to-Row (Dim. “H”) Spacing Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Fl u s h Ce n t e r e d No Ce n t e r e d Fl u s h Re a d o u t A B C D E Mo u n t i n g Mo u n t i n g Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s Ear Only Ear Only .125" [3.18] Ea r s .125" [3.18] .125" [3.18] G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole 10 1. 8 3 5 1. 5 7 5 1. 2 6 0 1. 1 0 0 0. 9 0 0 0. 4 2 0 0. 2 4 0 A8 D 1 0 R A 2 9 A M 2 3 3 A8 D 1 0 R A 2 9 C M 2 3 3 A8 D 1 0 R A 2 9 E M 2 3 3 A8 D 1 0 R A 2 9 F M 2 3 3 46 . 6 1 40 . 0 1 32 . 0 0 27 . 9 4 22 . 8 6 10 . 6 7 6. 1 0 12 2. 0 3 5 1. 7 7 5 1. 4 6 0 1. 3 0 0 1. 1 0 0 0. 4 2 0 0. 2 4 0 A8 D 1 2 R A 2 9 A M 2 3 3 A8 D 1 2 R A 2 9 C M 2 3 3 A8 D 1 2 R A 2 9 E M 2 3 3 – 51 . 6 9 45 . 0 9 37 . 0 8 33 . 0 2 27 . 9 4 10 . 6 7 6. 1 0 15 2. 3 3 5 2. 0 7 5 1. 7 6 0 1. 6 0 0 1. 4 0 0 0. 4 2 0 0. 2 4 0 A8 D 1 5 R A 2 9 A M 2 3 3 A8 D 1 5 R A 2 9 C M 2 3 3 A8 D 1 5 R A 2 9 E M 2 3 3 A8 D 1 5 R A 2 9 F M 2 3 3 59 . 3 1 52 . 7 1 44 . 7 0 40 . 6 4 35 . 5 6 10 . 6 7 6. 1 0 18 2. 6 3 5 2. 3 7 5 2. 0 6 0 1. 9 0 0 1. 7 0 0 0. 4 2 0 0. 2 4 0 A8 D 1 8 R A 2 9 A M 2 3 3 A8 D 1 8 R A 2 9 C M 2 3 3 A8 D 1 8 R A 2 9 E M 2 3 3 A8 D 1 8 R A 2 9 F M 2 3 3 66 . 9 3 60 . 3 3 52 . 3 2 48 . 2 6 43 . 1 8 10 . 6 7 6. 1 0 20 2. 8 3 5 2. 5 7 5 2. 2 6 0 2. 1 0 0 1. 9 0 0 0. 4 2 0 0. 2 4 0 A8 D 2 0 R A 2 9 A M 2 3 3 A8 D 2 0 R A 2 9 C M 2 3 3 A8 D 2 0 R A 2 9 E M 2 3 3 – 72 . 0 1 65 . 4 1 57 . 4 0 53 . 3 4 48 . 2 6 10 . 6 7 6. 1 0 22 3. 0 3 5 2. 7 7 5 2. 4 6 0 2. 3 0 0 2. 1 0 0 0. 4 2 0 0. 2 4 0 A8 D 2 2 R A 2 9 A M 2 3 3 A8 D 2 2 R A 2 9 C M 2 3 3 A8 D 2 2 R A 2 9 E M 2 3 3 – 77 . 0 9 70 . 4 9 62 . 4 8 58 . 4 2 53 . 3 4 10 . 6 7 6. 1 0 25 3. 3 3 5 3. 0 7 5 2. 7 6 0 2. 6 0 0 2. 4 0 0 0. 4 2 0 0. 2 4 0 A8 D 2 5 R A 2 9 A M 2 3 3 A8 D 2 5 R A 2 9 C M 2 3 3 A8 D 2 5 R A 2 9 E M 2 3 3 A8 D 2 5 R A 2 9 F M 2 3 3 84 . 7 1 78 . 1 1 70 . 1 0 66 . 0 4 60 . 9 6 10 . 6 7 6. 1 0 28 3. 6 3 5 3. 3 7 5 3. 0 6 0 2. 9 0 0 2. 7 0 0 0. 4 2 0 0. 2 4 0 A8 D 2 8 R A 2 9 A M 2 3 3 A8 D 2 8 R A 2 9 C M 2 3 3 A8 D 2 8 R A 2 9 E M 2 3 3 – 92 . 3 3 85 . 7 3 77 . 7 2 73 . 6 6 68 . 5 8 10 . 6 7 6. 1 0 30 3. 8 3 5 3. 5 7 5 3. 2 6 0 3. 1 0 0 2. 9 0 0 0. 4 2 0 0. 2 4 0 A8 D 3 0 R A 2 9 A M 2 3 3 A8 D 3 0 R A 2 9 C M 2 3 3 A8 D 3 0 R A 2 9 E M 2 3 3 A8 D 3 0 R A 2 9 F M 2 3 3 97 . 4 1 90 . 8 1 82 . 8 0 78 . 7 4 73 . 6 6 10 . 6 7 6. 1 0 31 3. 9 3 5 3. 6 7 5 3. 3 6 0 3. 2 0 0 3. 1 0 0 0. 4 2 0 0. 2 4 0 A8 D 3 1 R A 2 9 A M 2 3 3 A8 D 3 1 R A 2 9 C M 2 3 3 A8 D 3 1 R A 2 9 E M 2 3 3 A8 D 3 1 R A 2 9 F M 2 3 3 99 . 9 5 93 . 3 5 85 . 3 4 81 . 2 8 78 . 7 4 10 . 6 7 6. 1 0 35 4. 3 3 5 4. 0 7 5 3. 7 6 0 3. 6 0 0 3. 4 0 0 0. 4 2 0 0. 2 4 0 A8 D 3 5 R A 2 9 A M 2 3 3 A8 D 3 5 R A 2 9 C M 2 3 3 A8 D 3 5 R A 2 9 E M 2 3 3 – 11 0 . 1 1 10 3 . 5 1 95 . 5 0 91 . 4 4 86 . 3 6 10 . 6 7 6. 1 0 36 4. 4 3 5 4. 1 7 5 3. 8 6 0 3. 7 0 0 3. 5 0 0 0. 4 2 0 0. 2 4 0 A8 D 3 6 R A 2 9 A M 2 3 3 A8 D 3 6 R A 2 9 C M 2 3 3 A8 D 3 6 R A 2 9 E M 2 3 3 – 11 2 . 6 5 10 6 . 0 5 98 . 0 4 93 . 9 8 88 . 9 0 10 . 6 7 6. 1 0 40 4. 8 3 5 4. 5 7 5 4. 2 6 0 4. 1 0 0 3. 9 0 0 0. 4 2 0 0. 2 4 0 A8 D 4 0 R A 2 9 A M 2 3 3 A8 D 4 0 R A 2 9 C M 2 3 3 A8 D 4 0 R A 2 9 E M 2 3 3 – 12 2 . 8 1 11 6 . 2 1 10 8 . 2 0 10 4 . 1 4 99 . 0 6 10 . 6 7 6. 1 0 43 5. 1 3 5 4. 8 7 5 4. 5 6 0 4. 4 0 0 4. 2 0 0 0. 4 2 0 0. 2 4 0 A8 D 4 3 R A 2 9 A M 2 3 3 A8 D 4 3 R A 2 9 C M 2 3 3 A8 D 4 3 R A 2 9 E M 2 3 3 – 13 0 . 4 3 12 3 . 8 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 10 . 6 7 6. 1 0 44 5. 2 3 5 4. 9 7 5 4. 6 6 0 4. 5 0 0 4. 3 0 0 0. 4 2 0 0. 2 4 0 A8 D 4 4 R A 2 9 A M 2 3 3 A8 D 4 4 R A 2 9 C M 2 3 3 A8 D 4 4 R A 2 9 E M 2 3 3 – 13 2 . 9 7 12 6 . 3 7 11 8 . 3 6 11 4 . 3 0 10 9 . 2 2 10 . 6 7 6. 1 0 50 5. 8 3 5 5. 5 7 5 5. 2 6 0 5. 1 0 0 4. 8 0 0 0. 4 2 0 0. 2 4 0 A8 D 5 0 R A 2 9 A M 2 3 3 A8 D 5 0 R A 2 9 C M 2 3 3 A8 D 5 0 R A 2 9 E M 2 3 3 A8 D 5 0 R A 2 9 F M 2 3 3 14 8 . 2 1 14 1 . 6 1 13 3 . 6 0 12 9 . 5 4 12 1 . 9 2 10 . 6 7 6. 1 0 60 6. 8 3 5 6. 5 7 5 6. 2 6 0 6. 1 0 0 5. 9 0 0 0. 4 2 0 0. 2 4 0 A8 D 6 0 R A 2 9 A M 2 3 3 A8 D 6 0 R A 2 9 C M 2 3 3 A8 D 6 0 R A 2 9 E M 2 3 3 – 17 3 . 6 1 16 7 . 0 1 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 10 . 6 7 6. 1 0 65 7. 3 3 5 7. 0 7 5 6. 7 6 0 6. 6 0 0 6. 4 0 0 0. 4 2 0 0. 2 4 0 A8 D 6 5 R A 2 9 A M 2 3 3 A8 D 6 5 R A 2 9 C M 2 3 3 A8 D 6 5 R A 2 9 E M 2 3 3 A8 D 6 5 R A 2 9 F M 2 3 3 18 6 . 3 1 17 9 . 7 1 17 1 . 7 0 16 7 . 6 4 16 2 . 5 6 10 . 6 7 6. 1 0 47 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .125 x .250 [3.18 x 6.35], Centerline Straight Dip Solder and Wire Wrap Tai l s Product Facts nRecognized under the Component Program .054±.071 of Underwriters [1.37±1.890] PC Board Laboratories Inc., File No. E60980 [.73.0602] Card Depth nCertified .610 [5.49] by Canadian Standards Association, File No. LR49571 Physical Properties: SECTION X-X J ROTATED 90º Insulation Resistance— 5000 megohms minimum. Insertion/Withdrawal Force (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair .250 using .0620 [1.57] steel blade. [6.35] Insulator Body—Glass filled .[0.6245] Sq. thermoplastic, UL rating 94V-O. High temp. plastic option is available; add C suffix M399 to part number. Color—Black D Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] .125 Ref. nickel underplate with .000030 .368 [3.18] [0.00076] gold in the mating area, [9.35] SECTION X-X tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: Operation Voltage—600 VDC (sea level) E Current Rating—3 Amperes Initial Contact Resistance— B 10 milliohms A Environmental Properties: Operating Temperature— -55˚C to +125˚C Dim B Temperature Cycling— Dim E MIL-STD-202 method 107 ±.003 Vibration—MIL-STD-202 method 204 [3.1.2258] Dia. P[±.080] Dia. Related Product Data: .250 Polarization Key—page 57 [6.35] Daughter Card Edge Pattern— .125 [3.18] page 57 P=.040 [1.02] Dip Solder Applications P=.042 [1.07] For Wire Wrap Applications Mounting Styles .250 [6.35] .250 [6.35] .610 [15.49] Ref. Centered Mounting Ear Centered Mounting Ear Flush Mounting Ear Flush Mounting Ear .180 No Mounting Ears .125 [3.18] Thru Hole 4-40 Threaded Insert .125 [3.18] Thru Hole 4-40 Threaded Insert [4.57] 4488 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .250" [6.35] Row-to-Row Dip Solder Mounting Ear Options No. of Du a l Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Re a d o u t Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Thru Hole in s e r t Thru Hole in s e r t Tail Length .160" [4.06] (DIM “J”) 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 A7 D 0 6 D S 2 9 A 2 A7 D 0 6 D S 2 9 B 2 A7 D 0 6 D S 2 9 C 2 A7 D 0 6 D S 2 9 D 2 A7 D 0 6 D S 2 9 E 2 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 A7 D 1 0 D S 2 9 A 2 A7 D 1 0 D S 2 9 B 2 A7 D 1 0 D S 2 9 C 2 A7 D 1 0 D S 2 9 D 2 A7 D 1 0 D S 2 9 E 2 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 A7 D 1 5 D S 2 9 A 2 A7 D 1 5 D S 2 9 B 2 A7 D 1 5 D S 2 9 C 2 A7 D 1 5 D S 2 9 D 2 A7 D 1 5 D S 2 9 E 2 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 A7 D 1 8 D S 2 9 A 2 A7 D 1 8 D S 2 9 B 2 A7 D 1 8 D S 2 9 C 2 A7 D 1 8 D S 2 9 D 2 A7 D 1 8 D S 2 9 E 2 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 A7 D 2 2 D S 2 9 A 2 A7 D 2 2 D S 2 9 B 2 A7 D 2 2 D S 2 9 C 2 – – 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 A7 D 2 5 D S 2 9 A 2 A7 D 2 5 D S 2 9 B 2 A7 D 2 5 D S 2 9 C 2 A7 D 2 5 D S 2 9 D 2 A7 D 2 5 D S 2 9 E 2 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 A7 D 2 8 D S 2 9 A 2 A7 D 2 8 D S 2 9 B 2 A7 D 2 8 D S 2 9 C 2 – – 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 A7 D 3 0 D S 2 9 A 2 A7 D 3 0 D S 2 9 B 2 A7 D 3 0 D S 2 9 C 2 A7 D 3 0 D S 2 9 D 2 A7 D 3 0 D S 2 9 E 2 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 A7 D 3 5 D S 2 9 A 2 A7 D 3 5 D S 2 9 B 2 A7 D 3 5 D S 2 9 C 2 – – 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 A7 D 3 6 D S 2 9 A 2 A7 D 3 6 D S 2 9 B 2 A7 D 3 6 D S 2 9 C 2 – – 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 A7 D 4 0 D S 2 9 A 2 A7 D 4 0 D S 2 9 B 2 A7 D 4 0 D S 2 9 C 2 – – 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 A7 D 4 3 D S 2 9 A 2 A7 D 4 3 D S 2 9 B 2 A7 D 4 3 D S 2 9 C 2 – – 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 A7 D 5 0 D S 2 9 A 2 A7 D 5 0 D S 2 9 B 2 A7 D 5 0 D S 2 9 C 2 A7 D 5 0 D S 2 9 D 2 A7 D 5 0 D S 2 9 E 2 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 .125" [3.18] Centerline / .250" [6.35] Row-to-Row Wire Wrap Mounting Ear Options No. of Du a l Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Flush Fl u s h Re a d o u t Mounting Ear Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s A B C D E .125" [3.18] 4-40 Threaded Ea r s .125" [3.18] 4-40 Threaded Thru Hole in s e r t Thru Hole in s e r t Tail Length .560" [14.22] (DIM “J”) 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 A7 D 0 6 W W 2 9 A 3 A7 D 0 6 W W 2 9 B 3 – – – 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 A7 D 1 0 W W 2 9 A 3 A7 D 1 0 W W 2 9 B 3 – – – 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 A7 D 1 5 W W 2 9 A 3 A7 D 1 5 W W 2 9 B 3 – – – 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 A7 D 1 8 W W 2 9 A 3 A7 D 1 8 W W 2 9 B 3 – – – 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 A7 D 2 2 W W 2 9 A 3 A7 D 2 2 W W 2 9 B 3 – – – 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 A7 D 2 5 W W 2 9 A 3 A7 D 2 5 W W 2 9 B 3 – – – 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 A7 D 2 8 W W 2 9 A 3 A7 D 2 8 W W 2 9 B 3 – – – 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 A7 D 3 0 W W 2 9 A 3 A7 D 3 0 W W 2 9 B 3 – – – 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 A7 D 3 5 W W 2 9 A 3 A7 D 3 5 W W 2 9 B 3 – – – 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 A7 D 3 6 W W 2 9 A 3 A7 D 3 6 W W 2 9 B 3 – – – 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 A7 D 4 0 W W 2 9 A 3 A7 D 4 0 W W 2 9 B 3 – – – 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 A7 D 4 3 W W 2 9 A 3 A7 D 4 3 W W 2 9 B 3 – – – 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 A7 D 5 0 W W 2 9 A 3 A7 D 5 0 W W 2 9 B 3 – – – 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 49 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .125 x .250 [3.18 x 6.35], .125 x .150 [3.18 x 3.81], .125 x .200 [3.18 x 5.08] Centerline, Right Angle Tai l s Product Facts nRecognized under the Component Program of Underwriters .14±.01 [3.56±.25] Laboratories Inc., .025Sq. Typ. File No. E60980 [.64] nCertified by Canadian Standards H Association, File No. LR49571 Physical Properties: Insulation Resistance— 5000 megohms minimum. [1.0.3574±±1.0.87910] PC Board Insertion/Withdrawal Force SECTION X-X (Daughter Card)—8 oz./2 oz. ROTATED 90º [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled C thermoplastic, UL rating 94V-O. High temp. plastic option is available; add D suffix M399 to part number. Color—Black .125 REF .368 [3.18] Contacts—High strength copper alloy. [9.35] SECTION X-X Contact Plating—.000050 [0.00127] nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: E Operation Voltage—1000 VDC (sea level) B Current Rating—3 Amperes A Initial Contact Resistance— 10 milliohms Environmental Properties: Dim B Operating Temperature— .128 -55˚C to +125˚C [3.25] Dia. Dim E Temperature Cycling— .040±.003 MIL-STD-202 method 107 [1.02±.08] Dia. Vibration—MIL-STD-202 method 204 Related Product Data: Polarization Key—page 57 Dim G .125 Dim H Daughter Card Edge Pattern— Dim K [3.18] Row to Row Spacing page 57 Dim G - Centered Mounting Ear .125 [3.18] Cross Drilled Hole Only Dim K - Flush Mounting Ear .125 [3.18] Cross Drilled Hole Only Mounting Styles .250 [6.35] .250 [6.35] [1.651.409] Ref. [1.56.1409] Ref. [1.651.409] Ref. Centered Mounting Ear Centered Mounting Ear Flush Mounting Ear [4.1.5870] .125 [3.18] Thru Hole No Mounting Ears [4.1.5870] .125 [3.18] Thru Hole [6.2.3550] .12D5r [i3ll.e1d8 ]H Corleoss 5500 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .200" [5.08] and .150" [3.81] Row-to-Row (Dim. “H”) Spacing Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Fl u s h Ce n t e r e d No Ce n t e r e d Fl u s h Re a d o u t A B C D E Mo u n t i n g Mo u n t i n g Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s Ear Only Ear Only .125" [3.18] Ea r s .125" [3.18] .125" [3.18] G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole .150" [3.81] Row-to-Row (Dim. “H”) Spacing 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 0. 4 2 0 0. 2 4 0 A7 D 0 6 R A 2 9 A M 2 3 1 A7 D 0 6 R A 2 9 C M 2 3 1 A7 D 0 6 R A 2 9 E M 2 3 1 A7 D 0 6 R A 2 9 F M 2 3 1 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 10 . 6 7 6. 1 0 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 0. 4 2 0 0. 2 4 0 A7 D 1 0 R A 2 9 A M 2 3 1 A7 D 1 0 R A 2 9 C M 2 3 1 A7 D 1 0 R A 2 9 E M 2 3 1 A7 D 1 0 R A 2 9 F M 2 3 1 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 10 . 6 7 6. 1 0 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 0. 4 2 0 0. 2 4 0 A7 D 1 5 R A 2 9 A M 2 3 1 A7 D 1 5 R A 2 9 C M 2 3 1 A7 D 1 5 R A 2 9 E M 2 3 1 A7 D 1 5 R A 2 9 F M 2 3 1 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 10 . 6 7 6. 1 0 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 0. 4 2 0 0. 2 4 0 A7 D 1 8 R A 2 9 A M 2 3 1 A7 D 1 8 R A 2 9 C M 2 3 1 A7 D 1 8 R A 2 9 E M 2 3 1 A7 D 1 8 R A 2 9 F M 2 3 1 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 10 . 6 7 6. 1 0 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 0. 4 2 0 0. 2 4 0 A7 D 2 2 R A 2 9 A M 2 3 1 A7 D 2 2 R A 2 9 C M 2 3 1 A7 D 2 2 R A 2 9 E M 2 3 1 A7 D 2 2 R A 2 9 F M 2 3 1 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 10 . 6 7 6. 1 0 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 0. 4 2 0 0. 2 4 0 A7 D 2 5 R A 2 9 A M 2 3 1 A7 D 2 5 R A 2 9 C M 2 3 1 A7 D 2 5 R A 2 9 E M 2 3 1 A7 D 2 5 R A 2 9 F M 2 3 1 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 10 . 6 7 6. 1 0 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 0. 4 2 0 0. 2 4 0 A7 D 2 8 R A 2 9 A M 2 3 1 A7 D 2 8 R A 2 9 C M 2 3 1 A7 D 2 8 R A 2 9 E M 2 3 1 A7 D 2 8 R A 2 9 F M 2 3 1 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 10 . 6 7 6. 1 0 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 0. 4 2 0 0. 2 4 0 A7 D 3 0 R A 2 9 A M 2 3 1 A7 D 3 0 R A 2 9 C M 2 3 1 A7 D 3 0 R A 2 9 E M 2 3 1 A7 D 3 0 R A 2 9 F M 2 3 1 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 10 . 6 7 6. 1 0 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 0. 4 2 0 0. 2 4 0 A7 D 3 5 R A 2 9 A M 2 3 1 A7 D 3 5 R A 2 9 C M 2 3 1 A7 D 3 5 R A 2 9 E M 2 3 1 A7 D 3 5 R A 2 9 F M 2 3 1 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 10 . 6 7 6. 1 0 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 0. 4 2 0 0. 2 4 0 A7 D 3 6 R A 2 9 A M 2 3 1 A7 D 3 6 R A 2 9 C M 2 3 1 A7 D 3 6 R A 2 9 E M 2 3 1 A7 D 3 6 R A 2 9 F M 2 3 1 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 10 . 6 7 6. 1 0 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 0. 4 2 0 0. 2 4 0 A7 D 4 0 R A 2 9 A M 2 3 1 A7 D 4 0 R A 2 9 C M 2 3 1 A7 D 4 0 R A 2 9 E M 2 3 1 A7 D 4 0 R A 2 9 F M 2 3 1 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 10 . 6 7 6. 1 0 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 0. 4 2 0 0. 2 4 0 A7 D 4 3 R A 2 9 A M 2 3 1 A7 D 4 3 R A 2 9 C M 2 3 1 A7 D 4 3 R A 2 9 E M 2 3 1 A7 D 4 3 R A 2 9 F M 2 3 1 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 10 . 6 7 6. 1 0 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 0. 4 2 0 0. 2 4 0 A7 D 5 0 R A 2 9 A M 2 3 1 A7 D 5 0 R A 2 9 C M 2 3 1 A7 D 5 0 R A 2 9 E M 2 3 1 A7 D 5 0 R A 2 9 F M 2 3 1 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 10 . 6 7 6. 1 0 .200" [5.08] Row-to-Row (Dim. “H”) Spacing 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 0. 4 7 0 0. 2 9 0 A7 D 0 6 R A 2 9 A M 2 3 2 A7 D 0 6 R A 2 9 C M 2 3 2 A7 D 0 6 R A 2 9 E M 2 3 2 A7 D 0 6 R A 2 9 F M 2 3 2 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 11 . 9 4 7. 3 7 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 0. 4 7 0 0. 2 9 0 A7 D 1 0 R A 2 9 A M 2 3 2 A7 D 1 0 R A 2 9 C M 2 3 2 A7 D 1 0 R A 2 9 E M 2 3 2 A7 D 1 0 R A 2 9 F M 2 3 2 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 11 . 9 4 7. 3 7 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 0. 4 7 0 0. 2 9 0 A7 D 1 5 R A 2 9 A M 2 3 2 A7 D 1 5 R A 2 9 C M 2 3 2 A7 D 1 5 R A 2 9 E M 2 3 2 A7 D 1 5 R A 2 9 F M 2 3 2 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 11 . 9 4 7. 3 7 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 0. 4 7 0 0. 2 9 0 A7 D 1 8 R A 2 9 A M 2 3 2 A7 D 1 8 R A 2 9 C M 2 3 2 A7 D 1 8 R A 2 9 E M 2 3 2 A7 D 1 8 R A 2 9 F M 2 3 2 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 11 . 9 4 7. 3 7 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 0. 4 7 0 0. 2 9 0 A7 D 2 2 R A 2 9 A M 2 3 2 A7 D 2 2 R A 2 9 C M 2 3 2 A7 D 2 2 R A 2 9 E M 2 3 2 A7 D 2 2 R A 2 9 F M 2 3 2 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 11 . 9 4 7. 3 7 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 0. 4 7 0 0. 2 9 0 A7 D 2 5 R A 2 9 A M 2 3 2 A7 D 2 5 R A 2 9 C M 2 3 2 A7 D 2 5 R A 2 9 E M 2 3 2 A7 D 2 5 R A 2 9 F M 2 3 2 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 11 . 9 4 7. 3 7 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 0. 4 7 0 0. 2 9 0 A7 D 2 8 R A 2 9 A M 2 3 2 A7 D 2 8 R A 2 9 C M 2 3 2 A7 D 2 8 R A 2 9 E M 2 3 2 A7 D 2 8 R A 2 9 F M 2 3 2 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 11 . 9 4 7. 3 7 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 0. 4 7 0 0. 2 9 0 A7 D 3 0 R A 2 9 A M 2 3 2 A7 D 3 0 R A 2 9 C M 2 3 2 A7 D 3 0 R A 2 9 E M 2 3 2 A7 D 3 0 R A 2 9 F M 2 3 2 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 11 . 9 4 7. 3 7 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 0. 4 7 0 0. 2 9 0 A7 D 3 5 R A 2 9 A M 2 3 2 A7 D 3 5 R A 2 9 C M 2 3 2 A7 D 3 5 R A 2 9 E M 2 3 2 A7 D 3 5 R A 2 9 F M 2 3 2 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 11 . 9 4 7. 3 7 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 0. 4 7 0 0. 2 9 0 A7 D 3 6 R A 2 9 A M 2 3 2 A7 D 3 6 R A 2 9 C M 2 3 2 A7 D 3 6 R A 2 9 E M 2 3 2 A7 D 3 6 R A 2 9 F M 2 3 2 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 11 . 9 4 7. 3 7 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 0. 4 7 0 0. 2 9 0 A7 D 4 0 R A 2 9 A M 2 3 2 A7 D 4 0 R A 2 9 C M 2 3 2 A7 D 4 0 R A 2 9 E M 2 3 2 A7 D 4 0 R A 2 9 F M 2 3 2 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 11 . 9 4 7. 3 7 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 0. 4 7 0 0. 2 9 0 A7 D 4 3 R A 2 9 A M 2 3 2 A7 D 4 3 R A 2 9 C M 2 3 2 A7 D 4 3 R A 2 9 E M 2 3 2 A7 D 4 3 R A 2 9 F M 2 3 2 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 11 . 9 4 7. 3 7 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 0. 4 7 0 0. 2 9 0 A7 D 5 0 R A 2 9 A M 2 3 2 A7 D 5 0 R A 2 9 C M 2 3 2 A7 D 5 0 R A 2 9 E M 2 3 2 A7 D 5 0 R A 2 9 F M 2 3 2 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 11 . 9 4 7. 3 7 51 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .250" [6.35] Row-to-Row (Dim. “H”) Spacing Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Fl u s h Ce n t e r e d No Ce n t e r e d Fl u s h Re a d o u t A B C D E Mo u n t i n g Mo u n t i n g Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s Ear Only Ear Only .125" [3.18] Ea r s .125" [3.18] .125" [3.18] G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole .250" [6.35] Row-to-Row (Dim. “H”) Spacing 6 1. 5 5 5 1. 2 9 5 1. 0 3 5 0. 8 7 5 0. 6 2 5 0. 5 2 0 0. 3 4 0 A7 D 0 6 R A 2 9 A A7 D 0 6 R A 2 9 C A7 D 0 6 R A 2 9 E A7 D 0 6 R A 2 9 F 39 . 5 0 32 . 8 9 26 . 2 9 22 . 2 3 15 . 8 8 13 . 2 1 8. 6 4 10 2. 0 5 5 1. 7 9 5 1. 5 3 5 1. 3 7 5 1. 1 2 5 0. 5 2 0 0. 3 4 0 A7 D 1 0 R A 2 9 A A7 D 1 0 R A 2 9 C A7 D 1 0 R A 2 9 E A7 D 1 0 R A 2 9 F 52 . 2 0 45 . 5 9 38 . 9 9 34 . 9 3 28 . 5 8 13 . 2 1 8. 6 4 15 2. 6 8 0 2. 4 2 0 2. 1 6 0 2. 0 0 0 1. 7 5 0 0. 5 2 0 0. 3 4 0 A7 D 1 5 R A 2 9 A A7 D 1 5 R A 2 9 C A7 D 1 5 R A 2 9 E A7 D 1 5 R A 2 9 F 68 . 0 7 61 . 4 7 54 . 8 6 50 . 8 0 44 . 4 5 13 . 2 1 8. 6 4 18 3. 0 5 5 2. 7 9 5 2. 5 3 5 2. 3 7 5 2. 1 2 5 0. 5 2 0 0. 3 4 0 A7 D 1 8 R A 2 9 A A7 D 1 8 R A 2 9 C A7 D 1 8 R A 2 9 E A7 D 1 8 R A 2 9 F 77 . 6 0 70 . 9 9 64 . 3 9 60 . 3 3 53 . 9 8 13 . 2 1 8. 6 4 22 3. 5 5 5 3. 2 9 5 3. 0 3 5 2. 8 7 5 2. 6 2 5 0. 5 2 0 0. 3 4 0 A7 D 2 2 R A 2 9 A A7 D 2 2 R A 2 9 C A7 D 2 2 R A 2 9 E A7 D 2 2 R A 2 9 F 90 . 3 0 83 . 6 9 77 . 0 9 73 . 0 3 66 . 6 8 13 . 2 1 8. 6 4 25 3. 9 3 0 3. 6 7 0 3. 4 1 0 3. 2 5 0 3. 0 0 0 0. 5 2 0 0. 3 4 0 A7 D 2 5 R A 2 9 A A7 D 2 5 R A 2 9 C A7 D 2 5 R A 2 9 E A7 D 2 5 R A 2 9 F 99 . 8 2 93 . 2 2 86 . 6 1 82 . 5 5 76 . 2 0 13 . 2 1 8. 6 4 28 4. 3 0 5 4. 0 4 5 3. 7 8 5 3. 6 2 5 3. 3 7 5 0. 5 2 0 0. 3 4 0 A7 D 2 8 R A 2 9 A A7 D 2 8 R A 2 9 C A7 D 2 8 R A 2 9 E A7 D 2 8 R A 2 9 F 10 9 . 3 5 10 2 . 7 4 96 . 1 4 92 . 0 8 85 . 7 3 13 . 2 1 8. 6 4 30 4. 5 5 5 4. 2 9 5 4. 0 3 5 3. 8 7 5 3. 6 2 5 0. 5 2 0 0. 3 4 0 A7 D 3 0 R A 2 9 A A7 D 3 0 R A 2 9 C A7 D 3 0 R A 2 9 E A7 D 3 0 R A 2 9 F 11 5 . 7 0 10 9 . 0 9 10 2 . 4 9 98 . 4 3 92 . 0 8 13 . 2 1 8. 6 4 35 5. 1 8 0 4. 9 2 0 4. 6 6 0 4. 5 0 0 4. 2 5 0 0. 5 2 0 0. 3 4 0 A7 D 3 5 R A 2 9 A A7 D 3 5 R A 2 9 C A7 D 3 5 R A 2 9 E A7 D 3 5 R A 2 9 F 13 1 . 5 7 12 4 . 9 7 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 13 . 2 1 8. 6 4 36 5. 3 0 5 5. 0 4 5 4. 7 8 5 4. 6 2 5 4. 3 7 5 0. 5 2 0 0. 3 4 0 A7 D 3 6 R A 2 9 A A7 D 3 6 R A 2 9 C A7 D 3 6 R A 2 9 E A7 D 3 6 R A 2 9 F 13 4 . 7 5 12 8 . 1 4 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 13 . 2 1 8. 6 4 40 5. 8 0 5 5. 5 4 5 5. 2 8 5 5. 1 2 5 4. 8 7 5 0. 5 2 0 0. 3 4 0 A7 D 4 0 R A 2 9 A A7 D 4 0 R A 2 9 C A7 D 4 0 R A 2 9 E A7 D 4 0 R A 2 9 F 14 7 . 4 5 14 0 . 8 4 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 13 . 2 1 8. 6 4 43 6. 1 8 0 5. 9 2 0 5. 6 6 0 5. 5 0 0 5. 2 5 0 0. 5 2 0 0. 3 4 0 A7 D 4 3 R A 2 9 A A7 D 4 3 R A 2 9 C A7 D 4 3 R A 2 9 E A7 D 4 3 R A 2 9 F 15 6 . 9 7 15 0 . 3 7 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 13 . 2 1 8. 6 4 50 7. 0 5 5 6. 7 9 5 6. 5 3 5 6. 3 7 5 6. 1 2 5 0. 5 2 0 0. 3 4 0 A7 D 5 0 R A 2 9 A A7 D 5 0 R A 2 9 C A7 D 5 0 R A 2 9 E A7 D 5 0 R A 2 9 F 17 9 . 2 0 17 2 . 5 9 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 13 . 2 1 8. 6 4 5522 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors, .156 x .200 [3.96 x 5.08] Centerline, Straight Dip Solder and Wire Wrap Tai l s Product Facts .054±.071 nRecognized under the [1.37±1.890 ] PC Board Component Program of Underwriters .300 Laboratories Inc., [7.62] Card Depth .610 File No. E60980 [5.49] nCertified by Canadian Standards Association, SECTION X-X ROTATED 90º File No. LR49571 J Physical Properties: Insulation Resistance— 5000 megohms minimum. .200 [5.08] Insertion/Withdrawal Force .025Sq. (Daughter Card)—8 oz./2 oz. [.64] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled C thermoplastic, UL rating 94V-O. High temp. plastic option is available; add D suffix M399 to part number. Color—Black .156 Ref. Contacts—High strength copper alloy. .368 [3.96] Contact Plating—.000050 [0.00127] [9.35] SECTION X-X nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: Operation Voltage—1500 VDC E (sea level) B Current Rating—3 Amperes Initial Contact Resistance— A 10 milliohms Environmental Properties: Operating Temperature— Dim B -55˚C to +125˚C Temperature Cycling— Dim E MIL-STD-202 method 107 [3.1.2258] Dia. P±.003[.08] Dia. Vibration—MIL-STD-202 method 204 Related Product Data: .200 Polarization Key—page 57 [5.08] .156 Daughter Card Edge Pattern— [3.25] page 57 P=.040 [1.02] Dip Solder Applications P=.042 [1.07] For Wire Wrap Applications Mounting Styles .250 [6.35] .610 [15.49] Ref. Centered Mounting Ear Centered Mounting Ear .180 .125 [3.18] Thru Hole 4-40 Threaded Insert No Mounting Ears [4.57] 53 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .156" [3.96] Centerline / .200" [5.08] Row-to-Row Mounting Ear Options No. of Du a l Di m e n s i o n s Ce n t e r e d Ce n t e r e d No Re a d o u t A B C D E Mounting Ear Mounting Ear Mo u n t i n g Po s i t i o n s .125" [3.18] Thru 4-40 Threaded Ea r s Ho l e In s e r t Tail Length .160" [4.06] (DIM “J”) 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 A6 D 0 6 D S 2 9 A 2 A6 D 0 6 D S 2 9 B 2 A6 D 0 6 D S 2 9 C 2 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 A6 D 1 0 D S 2 9 A 2 A6 D 1 0 D S 2 9 B 2 A6 D 1 0 D S 2 9 C 2 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 A6 D 1 2 D S 2 9 A 2 A6 D 1 2 D S 2 9 B 2 A6 D 1 2 D S 2 9 C 2 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 A6 D 1 5 D S 2 9 A 2 A6 D 1 5 D S 2 9 B 2 A6 D 1 5 D S 2 9 C 2 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 A6 D 1 8 D S 2 9 A 2 A6 D 1 8 D S 2 9 B 2 A6 D 1 8 D S 2 9 C 2 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 6 3. 2 7 6 A6 D 2 2 D S 2 9 A 2 A6 D 2 2 D S 2 9 B 2 A6 D 2 2 D S 2 9 C 2 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 A6 D 2 5 D S 2 9 A 2 A6 D 2 5 D S 2 9 B 2 A6 D 2 5 D S 2 9 C 2 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 A6 D 2 8 D S 2 9 A 2 A6 D 2 8 D S 2 9 B 2 A6 D 2 8 D S 2 9 C 2 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 A6 D 3 6 D S 2 9 A 2 A6 D 3 6 D S 2 9 B 2 A6 D 3 6 D S 2 9 C 2 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 A6 D 4 3 D S 2 9 A 2 A6 D 4 3 D S 2 9 B 2 A6 D 4 3 D S 2 9 C 2 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 Tail Length .220" [5.59] (DIM “J”) 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 A6 D 0 6 D S 2 9 A 3 A6 D 0 6 D S 2 9 B 3 A6 D 0 6 D S 2 9 C 3 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 A6 D 1 0 D S 2 9 A 3 A6 D 1 0 D S 2 9 B 3 A6 D 1 0 D S 2 9 C 3 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 A6 D 1 2 D S 2 9 A 3 A6 D 1 2 D S 2 9 B 3 A6 D 1 2 D S 2 9 C 3 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 A6 D 1 5 D S 2 9 A 3 A6 D 1 5 D S 2 9 B 3 A6 D 1 5 D S 2 9 C 3 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 A6 D 1 8 D S 2 9 A 3 A6 D 1 8 D S 2 9 B 3 A6 D 1 8 D S 2 9 C 3 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 6 3. 2 7 6 A6 D 2 2 D S 2 9 A 3 A6 D 2 2 D S 2 9 B 3 A6 D 2 2 D S 2 9 C 3 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 A6 D 2 5 D S 2 9 A 3 A6 D 2 5 D S 2 9 B 3 A6 D 2 5 D S 2 9 C 3 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 A6 D 2 8 D S 2 9 A 3 A6 D 2 8 D S 2 9 B 3 A6 D 2 8 D S 2 9 C 3 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 A6 D 3 6 D S 2 9 A 3 A6 D 3 6 D S 2 9 B 3 A6 D 3 6 D S 2 9 C 3 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 A6 D 4 3 D S 2 9 A 3 A6 D 4 3 D S 2 9 B 3 A6 D 4 3 D S 2 9 C 3 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 Tail Length .560" [14.22] (DIM “J”) For Wire Wrap Termination 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 A6 D 0 6 W W 2 9 A 3 A6 D 0 6 W W 2 9 B 3 – 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 A6 D 1 0 W W 2 9 A 3 A6 D 1 0 W W 2 9 B 3 – 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 A6 D 1 2 W W 2 9 A 3 A6 D 1 2 W W 2 9 B 3 – 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 A6 D 1 5 W W 2 9 A 3 A6 D 1 5 W W 2 9 B 3 – 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 A6 D 1 8 W W 2 9 A 3 A6 D 1 8 W W 2 9 B 3 – 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 6 3. 2 7 6 A6 D 2 2 W W 2 9 A 3 A6 D 2 2 W W 2 9 B 3 – 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 A6 D 2 5 W W 2 9 A 3 A6 D 2 5 W W 2 9 B 3 – 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 A6 D 2 8 W W 2 9 A 3 A6 D 2 8 W W 2 9 B 3 – 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 A6 D 3 6 W W 2 9 A 3 A6 D 3 6 W W 2 9 B 3 – 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 A6 D 4 3 W W 2 9 A 3 A6 D 4 3 W W 2 9 B 3 – 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 5544 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .156 x .200 [3.96 x 5.08] Centerline, .156 x .150 [3.96 x 3.81], Right Angle, Dip Solder Tai l s Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., .14±.01 [3.56±.25] File No. E60980 .025 Sq. Typ. nCertified [.64] by Canadian Standards Association, File No. LR49571 H Physical Properties: Insulation Resistance—5000 megohms minimum. Insertion/Withdrawal Force .054±.071 (Daughter Card)—8 oz./2 oz. [1.37±1.890] PC Board [35.6 N/ 8.9 N] average contact pair SECTION X-X using .0620 [1.57] steel blade. ROTATED 90º Insulator Body—Glass filled thermoplastic, UL rating 94V-O. High temp. plastic option is available; add C suffix M399 to part number. Color—Black D Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] .156 REF nickel underplate with .000030 .368 [3.96] [0.00076] gold in the mating area, [9.35] SECTION X-X tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: Operation Voltage—1500 VDC (sea level) E Current Rating—3 Amperes Initial Contact Resistance—10 B milliohms A Environmental Properties: Operating Temperature— -55˚C to +125˚C Dim B Temperature Cycling— .128 MIL-STD-202 method 107 [3.25] Dia. Dim E Vibration—MIL-STD-202 method 204 .040±.003 [1.02±.08] Dia. Related Product Data: Polarization Key—page 57 Daughter Card Edge Pattern— page 57 Dim G .156 Dim H Dim K [3.96] Row to Row Spacing Dim G - Centered Mounting Ear .125 [3.18] Cross Drilled Hole Only Dim K - Flush Mounting Ear .125 [3.18] Cross Drilled Hole Only Mounting Styles .250 [6.35] .250 [6.35] .610 [15.49] Ref. [1.651.409] Ref. [1.56.1409] Ref. .180 Centered Mounting Ear No Mounting Ears Centered Mounting Ear Flush Mounting Ear [4.57] .125 [3.18] Thru Hole .125 [3.18] Thru Hole .125 [3.18] Cross Drilled Hole 55 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .156" [3.96] Centerline / .200" [5.08] and .150" [3.81] Row-to-Row (Dim. “H”) Spacing Di m e n s i o n s Mounting Ear Options No. of Du a l Ce n t e r e d Fl u s h Ce n t e r e d No Ce n t e r e d Fl u s h Re a d o u t A B C D E Mo u n t i n g Mo u n t i n g Mounting Ear Mo u n t i n g Mounting Ear Mounting Ear Po s i t i o n s Ear Only Ear Only .125" [3.18] Ea r s .125" [3.18] .125" [3.18] G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole .200" [5.08] Row-to-Row (Dim. “H”) Spacing 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 0. 4 7 0 0. 2 9 0 A6 D 0 6 R A 2 9 A A6 D 0 6 R A 2 9 C A6 D 0 6 R A 2 9 E A6 D 0 6 R A 2 9 F 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 11 . 9 4 7. 3 7 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 0. 4 7 0 0. 2 9 0 A6 D 1 0 R A 2 9 A A6 D 1 0 R A 2 9 C A6 D 1 0 R A 2 9 E A6 D 1 0 R A 2 9 F 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 11 . 9 4 7. 3 7 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 0. 4 7 0 0. 2 9 0 A6 D 1 2 R A 2 9 A A6 D 1 2 R A 2 9 C A6 D 1 2 R A 2 9 E A6 D 1 2 R A 2 9 F 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 11 . 9 4 7. 3 7 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 0. 4 7 0 0. 2 9 0 A6 D 1 5 R A 2 9 A A6 D 1 5 R A 2 9 C A6 D 1 5 R A 2 9 E A6 D 1 5 R A 2 9 F 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 11 . 9 4 7. 3 7 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 0. 4 7 0 0. 2 9 0 A6 D 1 8 R A 2 9 A A6 D 1 8 R A 2 9 C A6 D 1 8 R A 2 9 E A6 D 1 8 R A 2 9 F 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 11 . 9 4 7. 3 7 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 6 3. 2 7 6 0. 4 7 0 0. 2 9 0 A6 D 2 2 R A 2 9 A A6 D 2 2 R A 2 9 C A6 D 2 2 R A 2 9 E A6 D 2 2 R A 2 9 F 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 4 83 . 2 1 11 . 9 4 7. 3 7 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 0. 4 7 0 0. 2 9 0 A6 D 2 5 R A 2 9 A A6 D 2 5 R A 2 9 C A6 D 2 5 R A 2 9 E A6 D 2 5 R A 2 9 F 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 11 . 9 4 7. 3 7 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 0. 4 7 0 0. 2 9 0 A6 D 2 8 R A 2 9 A A6 D 2 8 R A 2 9 C A6 D 2 8 R A 2 9 E A6 D 2 8 R A 2 9 F 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 11 . 9 4 7. 3 7 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 0. 4 7 0 0. 2 9 0 A6 D 3 6 R A 2 9 A A6 D 3 6 R A 2 9 C A6 D 3 6 R A 2 9 E A6 D 3 6 R A 2 9 F 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 11 . 9 4 7. 3 7 40 7. 0 8 8 6. 8 3 8 6. 5 2 5 6. 4 0 4 6. 0 8 4 0. 4 7 0 0. 2 9 0 A6 D 4 0 R A 2 9 A A6 D 4 0 R A 2 9 C A6 D 4 0 R A 2 9 E A6 D 4 0 R A 2 9 F 18 0 . 0 4 17 3 . 6 9 16 5 . 7 4 21 3 . 4 6 15 4 . 5 3 11 . 9 4 7. 3 7 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 0. 4 7 0 0. 2 9 0 A6 D 4 3 R A 2 9 A A6 D 4 3 R A 2 9 C A6 D 4 3 R A 2 9 E A6 D 4 3 R A 2 9 F 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 11 . 9 4 7. 3 7 .150" [3.81] Row-to-Row (Dim. “H”) Spacing 6 1. 7 8 4 1. 5 3 4 1. 2 2 1 1. 1 0 0 0. 7 8 0 0. 4 2 0 0. 2 4 0 A6 D 0 6 R A 2 9 A M 2 3 3 A6 D 0 6 R A 2 9 C M 2 3 3 A6 D 0 6 R A 2 9 E M 2 3 3 A6 D 0 6 R A 2 9 F M 2 3 3 45 . 3 1 38 . 9 6 31 . 0 1 27 . 9 4 19 . 8 1 10 . 6 7 6. 1 0 10 2. 4 0 8 2. 1 5 8 1. 8 4 5 1. 7 2 4 1. 4 0 4 0. 4 2 0 0. 2 4 0 A6 D 1 0 R A 2 9 A M 2 3 3 A6 D 1 0 R A 2 9 C M 2 3 3 A6 D 1 0 R A 2 9 E M 2 3 3 A6 D 1 0 R A 2 9 F M 2 3 3 61 . 1 6 54 . 8 1 46 . 8 6 43 . 7 9 35 . 6 6 10 . 6 7 6. 1 0 12 2. 7 2 0 2. 4 7 0 2. 1 5 7 2. 0 3 6 1. 7 1 6 0. 4 2 0 0. 2 4 0 A6 D 1 2 R A 2 9 A M 2 3 3 A6 D 1 2 R A 2 9 C M 2 3 3 A6 D 1 2 R A 2 9 E M 2 3 3 A6 D 1 2 R A 2 9 F M 2 3 3 69 . 0 9 62 . 7 4 54 . 7 9 51 . 7 1 43 . 5 9 10 . 6 7 6. 1 0 15 3. 1 8 8 2. 9 3 8 2. 6 2 5 2. 5 0 4 2. 1 8 4 0. 4 2 0 0. 2 4 0 A6 D 1 5 R A 2 9 A M 2 3 3 A6 D 1 5 R A 2 9 C M 2 3 3 A6 D 1 5 R A 2 9 E M 2 3 3 A6 D 1 5 R A 2 9 F M 2 3 3 80 . 9 8 74 . 6 3 66 . 6 8 63 . 6 0 55 . 4 7 10 . 6 7 6. 1 0 18 3. 6 5 6 3. 4 0 6 3. 0 9 3 2. 9 7 2 2. 6 5 2 0. 4 2 0 0. 2 4 0 A6 D 1 8 R A 2 9 A M 2 3 3 A6 D 1 8 R A 2 9 C M 2 3 3 A6 D 1 8 R A 2 9 E M 2 3 3 A6 D 1 8 R A 2 9 F M 2 3 3 92 . 8 6 86 . 5 1 78 . 5 6 75 . 4 9 67 . 3 6 10 . 6 7 6. 1 0 22 4. 2 8 0 4. 0 3 0 3. 7 1 7 3. 5 9 6 3. 2 7 6 0. 4 2 0 0. 2 4 0 A6 D 2 2 R A 2 9 A M 2 3 3 A6 D 2 2 R A 2 9 C M 2 3 3 A6 D 2 2 R A 2 9 E M 2 3 3 A6 D 2 2 R A 2 9 F M 2 3 3 10 8 . 7 1 10 2 . 3 6 94 . 4 1 91 . 3 4 83 . 2 1 10 . 6 7 6. 1 0 25 4. 7 4 8 4. 4 9 8 4. 1 8 5 4. 0 6 4 3. 7 4 4 0. 4 2 0 0. 2 4 0 A6 D 2 5 R A 2 9 A M 2 3 3 A6 D 2 5 R A 2 9 C M 2 3 3 A6 D 2 5 R A 2 9 E M 2 3 3 A6 D 2 5 R A 2 9 F M 2 3 3 12 0 . 6 0 11 4 . 2 5 10 6 . 3 0 10 3 . 2 3 95 . 1 0 10 . 6 7 6. 1 0 28 5. 2 1 6 4. 9 6 6 4. 6 5 3 4. 5 3 2 4. 2 1 2 0. 4 2 0 0. 2 4 0 A6 D 2 8 R A 2 9 A M 2 3 3 A6 D 2 8 R A 2 9 C M 2 3 3 A6 D 2 8 R A 2 9 E M 2 3 3 A6 D 2 8 R A 2 9 F M 2 3 3 13 2 . 4 9 12 6 . 1 4 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 10 . 6 7 6. 1 0 36 6. 4 6 4 6. 2 1 4 5. 9 0 1 5. 7 8 0 5. 4 6 0 0. 4 2 0 0. 2 4 0 A6 D 3 6 R A 2 9 A M 2 3 3 A6 D 3 6 R A 2 9 C M 2 3 3 A6 D 3 6 R A 2 9 E M 2 3 3 A6 D 3 6 R A 2 9 F M 2 3 3 16 4 . 1 9 15 7 . 8 4 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 10 . 6 7 6. 1 0 40 7. 0 8 8 6. 8 3 8 6. 5 2 5 6. 4 0 4 6. 0 8 4 0. 4 2 0 0. 2 4 0 A6 D 4 0 R A 2 9 A M 2 3 3 A6 D 4 0 R A 2 9 C M 2 3 3 A6 D 4 0 R A 2 9 E M 2 3 3 A6 D 4 0 R A 2 9 F M 2 3 3 18 0 . 0 4 17 3 . 6 9 16 5 . 7 4 16 2 . 6 6 15 4 . 5 3 10 . 6 7 6. 1 0 43 7. 5 5 6 7. 3 0 6 6. 9 9 3 6. 8 7 2 6. 5 5 2 0. 4 2 0 0. 2 4 0 A6 D 4 3 R A 2 9 A M 2 3 3 A6 D 4 3 R A 2 9 C M 2 3 3 A6 D 4 3 R A 2 9 E M 2 3 3 A6 D 4 3 R A 2 9 F M 2 3 3 19 1 . 9 2 18 5 . 5 7 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 10 . 6 7 6. 1 0 5566 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Card Edge Polarization Keys Description/Application Tyco Electronics can pro- vide polarization keys in the basic configuration shown on this page. Our Modified Bellows and Cantilever Break Off Point Beam Series Card Edge Connectors use these keys. The part number and the 45° connector series for which it was designed are listed in the table below. .24 [6.10] .033 [.84] .19 [4.83] Ordering Information Acquired Part Used on Connector Shown on Number Series Pages 98014-01 Modified Bellows 41-56 98014-01 Cantilever Beam 28-40 Card Edge Connectors Recommended Daughter Card Edge Pattern Per MIL-C-21097E .062[1.57] Board Thickness 30° Slot Depth Min. Contact Spacing Dim. B .015 Dim. A [.38] (Per Applicable Catalog Page) See Note 3 Daughter Card Contact Spacing Dim A Dim B Non-Accum. ±.005 (.13) .100 [2.54] .093 [2.36] .052 [1.32] .125 [3.18] .093 [2.36] .052 [1.32] .156 [3.96] .105* [2.67] .094 [2.39] * Except MIL-C-21097E 8–4 which is .070 [1.78] NOTES: 1. Dimensions are in inches 2. Unless otherwise specified, tolerance is ±.005 [0.13 mm] for three place decimals. 3. Number of contact fingers shall be the same as the corresponding printed wiring connector. 57 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors Product Facts n Low profile housing is .460 [11.68] deep n 6 through 43 dual positions on .156 [3.96] centerline; 6 though 50 dual positions on .125 [3.18] centerline n Solder eyelet for wire-to- board or solder post for mother-daughter board application n Selective gold plating of contact area for high performance at low cost n Alternate platings are available on request n Contacts bifurcated for redundancy n Tin plate for high solder- ability of solder eyelets and posts n Accepts .055-.070 [1.40- 1.78] thick printed circuit boards n Housings available with or without mounting ears n Intercontact keying available n UL 94V-0 rated, glass-filled For printed circuit board with either solder posts for provisions, probe slots and polyester housings packaging, AMP Low Profile mother-daughter board identification of number one n Variety of solder post Edge Connectors provide applications or solder eye- position. lengths high performance, low cost let contacts for wire-to- The precision formed con- n 5 ampere current rating connections on .125 [3.18] board use. tacts made of phosphor per contact* and .156 [3.96] centerline Low Profile Edge Connec- bronze are gold plated on spacings. .100 [2.54] cen- n Recognized under the tors feature clear slot entry the contact mating surface terline connectors can be Component Program of and accept .055-.070 only. This selective plating made available, consult Underwriters [1.40-1.78] thick double- provides high reliability Tyco Electronics. Laboratories Inc. sided printed circuit boards. while maintaining low cost. File No. E28476 Mounted connector hous- Solder posts are available Solder eyelets and posts ings extend only .460 with .150 [3.18] and .180 are tin plated for excellent [11.68] from the mother [4.57] long tails on .140 solderability. The contact is board to allow efficient use [3.56] or .200 [5.08] row- bifurcated for redundancy. of available space. to-row spacing. Shorting contacts are available. These low profile connec- Impact-resistant thermo- tors are available in 6 plastic housing, UL rated All connector configurations through 43 dual position 94V-0, have molded-in are furnished preloaded. sizes on .156 [3.96] center- cavity identification and are Selectively loaded connec- line spacing and with 6 available with or without tors can be made available through 50 dual positions mounting ears. Additional for added economy. on .125 [3.18] centers. features of the housings Connectors are supplied include intercontact keying *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 5588 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .125 [3.18] Centerline Material and Finish: .128 PCBoard Thickness— [3.25] Dia. Housing—Green, glass-filled .055-.070[1.40-1.78] 2 (Plcs.) polyester Contacts—Phosphor bronze, duplex plated .000030 [0.00076] gold in con- tact area; .000100 [0.00254] bright tin .300 on posts, with entire contact under- [7.62] C plated .000030 [0.00076] nickel .125 [3.18] .125 .150 Related Product Data: [3.18] Typ. [3.81] A Keying Plug—page 63 B PC Board Hole Layouts—See below D PC Board Edge Pattern—page 63 .460 Technical Documents: [11.68] (pages 186, 187): .250 Product Specification [6.35] 108-9044 Instruction Sheet 408-7772 .125 Typ. #1 Cavity Identification [3.18] Molded Characters (Upper and Lower Case Letters Omitting Letters G, I, O &Q) 1 2 3 4 5 6 A B C D E F E .295 [.31 .2 15 8] Re f . .295 [.31 .2 15 8] Re f . .295 [.31 .2 15 8] Re f . [7.49] [7.49] [7.49] .165 .165 .165 [4.19] [4.19] [4.19] Post Length Post Length (See Chart) (See Chart) .280 Ref. [7.11] .200 .140 [5.08] [3.56] .235 Ref. [5.97] Flow Solder Post Flow Solder Post Solder Eyelet Contact .200[5.08] Row-to-Row Spacing .140[3.56] Row-to-Row Spacing .235[5.97] Row-to-Row Spacing [.31.2285] Dia. [.10.5322] Dia. [5.2.0080] [.31.2285] Dia. [.10.5322] Dia. [.31.4506] .335 .335 [8T.y5p1.] [3.1.1285] [.21.0504] [8T.y5p1.] [3.1.1285] [1.0.7780] B B Recommended Recommended PC Board Hole Layout PC Board Hole Layout 59 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .125 [3.18] Centerline (Continued) Flow Solder Post No. of Dimensions Post With Without .200 [5.08] Row-to-Row PoDsiutiaolns A B C D E Length* MoEuanrtsing MoEuanrtsing Spacing .875 .370 1.035 6 — — .150 — 2-530671-1 22.23 9.40 26.29 1.375 1.795 .370 1.535 2.055 .150 — 2-530671-2 10 34.93 45.59 9.40 38.99 52.20 .180 2-530663-2 — 2.000 2.420 .370 2.160 2.680 15 .150 — 2-530671-3 50.80 61.47 9.40 54.86 68.07 2.375 2.795 .370 2.535 3.055 18 .180 2-530663-4 2-530671-4 60.33 70.99 9.40 64.39 77.60 2.875 3.295 .370 3.035 3.555 22 .150 2-530662-5 2-530671-5 73.03 83.69 9.40 77.09 90.30 3.125 .370 3.285 24 — — .150 — 3-530671-3 79.38 9.40 83.44 3.625 4.045 .370 3.785 4.305 28 .150 2-530662-6 2-530671-6 92.08 102.74 9.40 96.14 109.35 3.875 .370 4.035 30 — — .150 — 2-530671-7 98.43 9.40 102.49 4.625 5.045 .370 4.785 5.305 .150 — 2-530671-9 36 117.48 128.14 9.40 121.54 134.75 .180 — 2-530672-9 5.125 5.545 .437 5.285 5.805 40 .150 — 3-530671-0 130.18 140.84 11.10 134.24 147.45 6.375 6.795 .437 6.535 7.055 50 .150 3-530662-2 — 161.93 172.59 11.10 165.99 179.20 Flow Solder Post No. of Dimensions Post With Without .140 [3.56] Row-to-Row PoDsiutiaolns A B C D E Length* MoEuanrtsing MoEuanrtsing Spacing 2.000 .370 2.160 15 — — .150 — 2-530673-3 50.80 9.40 54.86 3.625 .370 3.785 .150 — 2-530673-6 28 — — 92.08 9.40 96.14 .180 2-530674-6 — 6.375 6.795 .437 6.535 7.055 50 .180 3-530659-2 — 161.93 172.59 11.10 165.99 179.20 Solder Eyelet Contact No. of Dimensions With .235 [5.97] Row-to-Row Dual Mounting Positions A B C D E Ears Spacing 2.000 2.420 .370 2.160 2.680 15 2-530664-3 50.80 61.47 9.40 54.86 68.07 2.875 3.295 .370 3.035 3.555 22 2-530664-5 73.02 83.69 9.40 77.08 90.29 3.625 4.045 .370 3.785 4.305 28 2-530664-6 92.08 102.74 9.40 96.14 109.35 5.125 5.545 .437 5.285 5.805 40 3-530664-0 130.17 140.84 11.10 134.23 147.44 6.375 6.795 .437 6.535 7.055 50 3-530664-2 161.92 172.59 11.10 165.98 179.19 *Metric equivalents for post length are .150= [3.81]; .180= [4.57]. Note:Other connector sizes can be made available, consult Tyco Electronics. 6600 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .156 [3.96] Centerline Material and Finish: Mounting Ear with Insert Housing—Green, glass-filled PCBoard Thickness— .128 Dia. polyester .055-.070[1.40-1.78] [3.25] (2 Plcs.) Contacts—Phosphor bronze, duplex plated .000030 [0.00076] gold in con- tact area; .000100 [0.00254] bright tin on posts, with entire contact under- .300 plated .000030 [0.00076] nickel [7.62] C Insert—Brass .160 Related Product Data: T4-h4r0e aNdCe-d2 IBnserts [4.06] [.31.5966] Typ. [.31.5801] (2 per connector) A Keying Plug—page 63 B PC Board Hole Layouts—See below D PC Board Edge Pattern—page 63 .460 Technical Documents: [11.68] (pages 186, 187): .250 Product Specification [6.35] 108-9044 Instruction Sheet 408-7772 .156 Typ. #1 Cavity Identification [3.96] Molded Characters (Upper and Lower Case Letters Omitting Letters G, I, O &Q) 1 2 3 4 5 6 A B C D E F E .295 [.31.2158] Ref. .295 [.31.2158] Ref. .295 [.31.2158] Ref. [7.49] [7.49] [7.49] .165 .165 .165 [4.19] [4.19] [4.19] Post Length Post Length (See Chart) (See Chart) .280 Ref. [7.11] .200 .140 [5.08] [3.56] .235 Ref. [5.97] Flow Solder Post Flow Solder Post Solder Eyelet Contact .200[5.08] Row-to-Row Spacing .140[3.56] Row-to-Row Spacing .235[5.97] Row-to-Row Spacing [.31.2285] Dia. [.10.5322] Dia. [5.2.0080] [.31.2285] Dia. [.10.5322] Dia. [3.1.5460] .378 .378 [9T.y5p9.] [3.1.9566] .100 [T9.y5p9.] [.31.5966] [.10.7708] B [2.54] B Recommended Recommended PC Board Hole Layout PC Board Hole Layout 61 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .156 [3.96] Centerline (Continued) Flow Solder Post No. of Dimensions Post With With Without .200 [5.08] Row-to-Row PoDsiutiaolns A B C D E Length* MoEuanrtsing Maonudn tIinnsge Ertasrs MoEuanrtsing Spacing 1.100 1.535 .370 1.240 1.785 2-530655-1 2-530677-1 — 6 .150 27.94 38.99 9.40 31.50 45.34 12-530689-11 — 2-530666-1 1.724 2.159 .370 1.864 2.409 .150 2-530655-2 — 2-530666-2 10 43.79 54.84 9.40 47.35 61.19 .180 2-530656-2 — — 2.036 2.471 .370 2.176 2.721 12 .150 2-530655-3 — 2-530666-3 51.71 62.76 9.40 55.27 69.11 2.504 2.939 .370 2.644 3.189 2-530655-4 — 2-530666-4 15 .150 63.60 74.65 9.40 67.16 81.00 12-530689-41 — — 2.972 3.407 .370 3.112 3.657 .150 2-530655-5 — 2-530666-5 18 75.49 86.54 9.40 79.04 92.89 .180 — — 2-530667-5 2-530655-6 — 2-530666-6 3.596 4.031 .370 3.736 4.281 .150 22 12-530689-61 — 12-531433-41 91.34 102.39 9.40 94.89 108.74 .180 2-530656-6 2-530678-6 2-530667-6 4.064 4.499 .370 4.204 4.749 .150 2-530655-8 — 12-531433-11 25 103.23 114.27 9.40 106.78 120.62 .180 2-530656-8 — 2-530666-8 4.532 4.967 .370 4.672 5.217 .150 3-530655-2 — 3-530666-2 28 115.11 126.16 9.40 118.67 132.51 .180 3-530656-2 — — 2-530655-9 — 2-530666-9 30 4.844 5.279 .437 4.984 5.529 .150 12-530689-91 — — 123.04 134.09 11.10 126.59 140.44 .180 — — 2-530667-9 5.780 6.215 .437 5.920 6.465 .150 3-530655-0 — 12-531433-21 36 146.18 157.86 11.10 150.37 164.21 .180 13-530689-01 — 2-530667-0 6.872 7.307 .437 7.012 7.557 .150 3-530655-3 3-530677-3 3-530666-3 43 174.55 185.60 11.10 178.10 191.95 .180 3-530656-3 — 3-530667-3 Flow Solder Post Flow Solder Post Solder Eyelet Contact .140 [3.56] Row-to-Row NDou. aolf Dimensions Post With Without With Without Spacing Positions A B C D E Length* Mounting Mounting Mounting Mounting Ears Ears Ears Ears and 1.100 1.535 .370 1.240 1.785 6 .150 — — 2-530654-1 — Solder Eyelet Contact 27.94 38.99 9.40 31.50 45.34 .235 [5.97] Row-to-Row 10 1.724 2.159 .370 1.864 2.409 .150 2-530657-2 — 2-530654-2 — 43.79 54.84 9.40 47.35 61.19 Spacing 2.504 2.939 .370 2.644 3.189 .150 2-530657-4 — 2-530654-4 2-530667-4 15 63.60 74.65 9.40 67.16 81.00 .180 — 2-530669-4 — — 2.972 3.407 .370 3.112 3.657 18 .150 — 2-530668-5 2-530654-5 — 75.49 86.54 9.40 79.04 92.89 3.596 4.031 .370 3.736 4.281 22 .150 2-530657-6 2-530668-6 2-530654-6 — 91.34 102.39 9.40 94.89 108.74 3.908 4.343 .370 4.048 4.593 24 .150 — — 2-530654-7 — 99.26 110.31 9.40 102.81 116.66 4.532 4.967 .370 4.672 5.217 28 .150 3-530657-2 3-530668-2 3-530654-2 — 115.11 126.16 9.40 118.67 132.51 4.844 5.279 .437 4.984 5.529 30 — — — 2-530654-9 — 123.04 134.09 11.10 126.59 140.44 5.780 6.215 .437 5.920 6.465 .150 — — 3-530654-0 — 36 146.81 155.58 11.10 150.36 164.21 .180 — 3-530669-0 — — 43 6.872 7.307 .437 7.012 7.557 .150 3-530657-3 — 3-530654-3 — 174.55 185.60 11.10 178.10 191.95 *Metric equivalents for post length are .150= [3.81]; .180= [4.57]. 1For .040[1.02] diameter hole. Note:Other connector sizes can be made available, consult Tyco Electronics. 6622 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors (Continued) Keying Plug Intercontact Key Material: Glass-filled nylon Part No. 650025-2 Recommended PC Board .125 [3.18] Centerline Boards Edge Patterns Intercontact KeySlot .050 .300 Min. [1.27] [7.52] .400 [10.16] .125 .078±..000050 [3.18] .125 [1.98±00..1030] [4.1.4755] Min. [3.18] Recommended Gold Area .156[3.96] Centerline Boards Intercontact KeySlot .300 .050 [7.52] Min. [1.27] .400 [10.16] [.41.6006] .156 [.20.9349±±00..00..10003050] [.41.7455] Min. [3.96] Recommended Gold Area 63 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors Product Facts n Wide variety of sizes avail- able from 3 dual positions and up—no initial tooling investment required for new versions n Connectors can be selec- tively loaded with contacts in custom patterns n Connectors tooled on all standard centerlines— .100 [2.54], .125 [3.18], .150 [3.81], .156 [3.96], and .200 [5.08] Note: .200 [5.08] centerline capabili- ties provided by loading every-other dual position of .100 [2.54] centerline housings. n Closed card entry protects contacts and daughter board pads n Adapts to a wide range of mother board thicknesses to .104 [2.64] maximum n Phosphor bronze contacts selectively plated for top performance and maximum economy n Protective channel helps prevent overstress of The AMP Twin Leaf termination resistance, long Card guides or end caps contacts Connector is a highly life and moderate contact make alignment of daughter reliable, low-cost mother/ separation force meet board pads with Twin Leaf n Daughter board keying daughter board connector industry requirements for Connector contacts quick available in intercontact or designed for solid-state reliability. Connectors are and easy. on-contact styles circuitry. The one-piece, tooled in sizes from 3 n Recognized under the multi-contact connector through 80 dual-contact Component Program requires no front-end tooling. positions with contacts on of Underwriters This versatile connector for .100 [2.54], .125 [3.18], Performance Specifications Laboratories Inc., double-sided printed circuit .150 [3.81], .156 [3.96] Contact Rating*: File No. E28476 boards uses preloaded or .200 [5.08] centers. 3 amperes continuous contacts and selective plat- Other sizes and custom- Temperature Rating: ing to give lowest applied loaded contact patterns –55°C to +105°C cost. Critical contact areas are available on request. Insulation Resistance: are gold-over-nickel plated The connector housing, 5,000 megohms to provide positive electrical made of glass-filled poly- connection between con- ester with a UL 94V-0 Dielectric Withstanding Voltage: tacts and daughter board rating, features a standoff Test Voltage (AC, RMS) pads. Contact posts are tin which facilitates the use of a Altitude Contact Spacing plated for efficient dip probe for electrical continuity .100 [2.54] .150 [3.81] soldering to mother boards checks without risk of dam- Sea Level 1,000 1,500 up to .104 [2.64] thick. age to the contacts. A 50,000 ft The Twin Leaf Connector closed card-entry design of 15 240 m 400 600 delivers high reliability the housing protects the 70,000 ft 280 400 because the contacts contacts and daughter 21 336 m possess superior tolerance board pads. Housings Termination Resistance: of environmental stresses accept daughter boards 10 milliohms, max. including shock, vibration ranging from .055 [1.40] to Durability:Tested to 100 cycles and variations of tempera- .070 [1.78] in thickness. (engage/withdraw) ture and humidity. Other Intercontact and on-contact *Consult Tyco Electronics engi- characteristics such as high keys are available for Contact Plating:.000015 [0.00038] ntaecetrsi nfogr w phoewne pr aarpapllleicliantgio cnosn.- insulation resistance, low polarization of the housings. selective gold plating on contact area; bright tin on solder tine 6644 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors Without End Caps .100 [2.54], .125 [3.18], .150 [3.81] and .400 Fit for .156 [3.96] Centerlines, [10.16] .055-.070 With Solder Posts [1.4-1.78] PCBoard Card Slot .225 Material and Finish: Depth [5.72] .400[10.16] Housing—Glass-filled polyester, Max. .610 94V-0 rated [15.49] Contacts—Phosphor bronze, plated .000015 [0.00038] gold in contact area; tin on posts, with entire contact under- plated .000030 [0.00076] nickel, except where noted .010 x .024 .135*or.170* A [0.25 x 0.61] .200 [3.43] [4.32] B Post for .035[0.89] [5.08] Related Product Data: A Dia. Hole D Performance Specifications— page 64 Card Guides—pages 70, 71 Keying Plugs—page 72 *Post length: .135[3.43] for .150[3.81] and.156 [3.96] centerlines, except where noted; PC Board Hole Layouts—page 71 .170[4.32] for .100[2.54] and.125 [3.18] centerlines, except where noted. Technical Documents: (pages 186, 187): Product Specification 108-9027 Instruction Sheets 408-7479, 408-7498, 408-7506 65 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors Without End Caps A = .100 [2.54] A = .125 [3.18] A = .150 [3.81] A = .156 [3.96] No. of Centerline Spacing Centerline Spacing Centerline Spacing Centerline Spacing Dual Positions B D Part B D Part B D Part B D Part Numbers Numbers Numbers Numbers .300 .600 2 — — — — — — 1,31-583694-1 — — — 7.62 15.24 .200 .400 .300 .600 .312 .624 3 583485-6 — — — 1,31-645155-11,3 4-583486-8 5.08 10.16 7.62 15.24 7.92 15.85 .450 .750 4 — — — — — — 583407-5 — — — 11.43 19.05 .400 .600 .600 .900 5 583485-7 — — — 583407-6 — — — 10.16 15.24 15.24 22.86 1.050 1.350 8 — — — — — — 583407-9 — — — 26.67 34.29 1.000 1.250 9 — — — 583533-7 — — — — — — 25.40 31.75 .900 1.100 1.400 1.720 10 1-583485-2 — — — — — — 4-583486-1 22.86 27.94 35.56 43.69 1.500 1.800 11 — — — — — — 1-583407-2 — — — 38.10 45.72 1.300 1.500 14 1-583485-6 — — — — — — — — — 33.02 38.10 2.100 2.400 15 — — — — — — 1-583407-5 — — — 53.34 60.96 2.125 2.375 2.652 2.964 18 — — — 1-583533-6 — — — 3-583486-3 53.97 60.32 67.36 75.28 2.850 3.150 2-583407-0 20 — — — — — — — — — 72.39 80.01 530292-93 2.625 2.875 22 — — — 2-583533-0 — — — — — — 66.67 73.02 4.050 4.350 4.212 4.524 28 — — — — — — 583407-1 2-583486-3 102.87 110.49 106.99 114.91 3.625 3.875 4.524 4.836 30 — — — 531534-22 — — — 2-583486-1 92.08 98.43 114.91 122.83 4.500 4.800 31 — — — — — — 530292-33 — — — 53.34 60.96 4.992 5.304 33 — — — — — — — — — 1-583486-8 126.80 134.72 5.460 5.772 36 — — — — — — — — — 1-583486-5 138.68 146.61 4.875 5.125 5.850 6.150 6.084 6.396 40 — — — 3-583533-8 3-583407-8 1-583486-1 123.83 130.18 148.59 156.21 154.53 162.46 6.552 6.864 43 — — — — — — — — — 583486-8 166.42 174.35 4.900 5.100 6.130 6.380 7.350 7.650 7.640 7.960 50 583485-3 5-583533-01 4-583407-8 583486-1 124.46 129.54 155.70 162.05 186.69 194.31 194.06 202.18 8.580 8.892 56 — — — — — — — — — 5-583486-0 217.93 225.86 6.400 6.600 65 5-583485-6 — — — — — — — — — 162.56 167.64 7.900 8.100 80 5-583485-5 — — — — — — — — — 200.66 205.74 1Contacts are plated .000030 [0.00076] gold in contact area, tin on posts, with entire contact underplated .000030 [0.00076] nickel. 2Post length .135 [3.43] 3Post length .170 [4.32] Note:Other connector sizes can be made available, consult Tyco Electronics. 6666 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors With End Caps .100 [2.54], .125 [3.18], .150 [3.81] and .400 Fit for .156 [3.96] Centerlines, [10.16] .055-.070 With Solder Posts F [1.4-1.78] PCBoard Material and Finish: Card Slot .225 Depth [5.72] Housing—Glass-filled polyester, .400[10.16] 94V-0 rated Max. .610 [15.49] Contacts—Phosphor bronze, plated .000015 [0.00038] gold in contact area; tin on posts, with entire contact under- plated .000030 [0.00076] nickel .135*or.170* .010 x .024 RPeerlfaotremda nPcreo dSupecct iDficaatati:ons— [1.0.5682] A B E** SAeclcf-etapptsp i#n2g [3.43] [4.32] [.52.0008] Pos[t0 Df.o2iar5 . . x0H 30o5.l6 e[10].89] page 64 G Screw Keying Plugs—page 72 PC Board Hole Layouts—page 71 Technical Documents: **Post length: .135[3.43] for .150[3.81] and.156 [3.96] centerlines; (pages 186, 187): .170[4.32] for .100[2.54] and.125 [3.18] centerlines. **See page 27 for dimensions. Product Specification 108-9027 Instruction Sheets 408-7479, 408-7498, 408-7506 67 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors With End Caps No. of A = .100 [2.54] Centerline Spacing A = .125 [3.18] Centerline Spacing A = .150 [3.81] Centerline Spacing A = .156 [3.96] Centerline Spacing DPousa.l B F G NuPmabrters B F G NuPmabrters B F G NuPmabrters B F G NuPmabrters 3 .52.0003 1.04.0106 1.87.3644 1-583715-1 — — — — — — — — — — — — 5 1.04.0106 1.56.0204 2.39.3742 1-583715-3 — — — — — — — — — — — — 6 1.25.0700 1.77.0708 12.60.3246 1-583715-4 1.56.2858 2.28.7253 13.12.5996 1-583679-5 — — — — 1.97.8801 12.70.9724 13.95.3087 1-583660-6 7 1.56.0204 2.08.0302 12.81.3840 1-583715-5 — — — — — — — — — — — — 9 2.08.0302 12.50.0400 13.33.3848 1-583715-7 — — — — — — — — — — — — 10 2.29.0806 12.71.0904 13.64.3442 1-583715-8 — — — — — — — — 13.54.0646 14.37.1569 25.41.6921 1-583660-0 12 12.71.0904 13.33.0002 14.16.3540 1-583715-0 — — — — — — — — 14.37.1568 25.10.2581 26.24.7844 1-583660-2 13 13.02.0408 13.54.0506 14.47.3044 1-583715-1 — — — — — — — — — — — — 14 — — — — — — — — 14.99.5503 25.72.5105 26.86.8147 1-583692-3 25.10.2581 25.93.4404 27.07.8766 1-583660-4 15 13.54.0506 14.06.0604 14.99.3142 1-583715-3 — — — — 25.31.0304 26.04.0906 27.18.3948 1-583692-4 25.51.8447 26.34.9460 27.49.4723 1-583660-2 17 14.06.0604 14.58.0702 25.41.3240 1-583715-5 25.00.0800 25.72.5105 26.66.3940 1-583679-6 — — — — — — — — 18 14.37.0108 14.89.0206 25.62.3744 1-583715-6 25.31.2958 26.03.7353 27.07.5098 1-583679-7 — — — — 26.76.5326 27.59.6248 38.64.1601 1-583660-7 20 14.89.0206 25.31.0304 26.14.3842 1-583715-8 26.03.7353 26.66.2658 37.60.0493 1-583679-9 — — — — — — — — 22 — — — — — — — — — — — — 38.32.7261 39.15.8184 140.20.3446 2-583660-1 25 26.04.0906 26.66.0004 27.49.3542 2-583715-3 37.60.0200 38.22.5505 39.26.3340 2-583679-4 39.16.0404 39.99.0006 141.03.3048 2-583692-4 39.57.4140 140.30.6052 141.45.0325 2-583660-4 26 26.35.0500 26.87.0508 37.70.3045 2-583715-4 — — — — — — — — — — — — 28 26.87.0508 27.39.0606 38.22.3144 2-583715-6 38.53.7753 39.26.2058 140.10.0893 2-583679-6 — — — — 140.62.1928 141.45.2941 142.69.7294 2-583660-7 30 27.39.0606 37.81.0704 38.74.3242 2-583715-8 — — — — 141.03.5409 141.86.5101 152.90.8143 1-583692-1 141.45.2941 142.28.3863 153.42.8126 2-583660-9 31 37.60.0200 38.12.0208 38.95.3746 2-583715-9 — — — — — — — — — — — — 32 37.81.0704 38.33.0802 39.26.3340 3-583715-0 — — — — — — — — 142.28.3863 153.01.4786 154.25.9049 3-583660-1 33 — — — — — — — — 142.18.0902 152.91.0504 154.05.3546 3-583692-1 — — — — 34 38.33.0802 38.85.0900 39.78.3348 3-583715-2 — — — — — — — — — — — — 35 38.34.0306 39.16.0404 39.99.3942 3-583715-3 — — — — 152.91.0504 153.74.0106 154.88.3148 3-583692-3 153.43.0742 154.26.1664 165.30.6927 3-583660-4 36 38.85.0900 39.37.0908 140.20.3446 3-583715-4 — — — — 153.32.5305 154.05.5907 155.19.8949 3-583692-4 153.84.6608 154.67.7621 165.72.1984 1-583660-1 40 39.99.0006 140.41.0104 141.24.3642 3-583715-8 142.38.7853 153.01.2158 153.95.0993 3-583679-8 154.88.5509 165.61.5201 166.75.8243 3-583692-8 — — — — 41 140.10.0600 140.62.0608 141.55.3146 3-583715-9 — — — — — — — — — — — — 43 — — — — — — — — — — — — 166.65.5422 167.48.6345 178.53.1607 4-583660-1 50 142.49.0406 152.91.0504 153.84.3042 4-583715-8 165.51.2558 166.13.7953 167.17.5698 4-583679-8 178.63.5609 179.46.5301 280.50.8343 4-583692-8 179.46.4146 270.29.5068 281.34.0421 4-583660-8 80 270.09.0606 280.51.0704 281.44.3242 5-583715-7 — — — — — — — — — — — — Note:Other connector sizes can be made available, consult Tyco Electronics. 6688 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors With End Caps (Continued) Typical Connector and Card Guide Assembly Double Slotted Single Slotted Card Guide (Without Stand-off) Card Guide Double Slotted Card Guide (With Stand-off) End Cap Stand-off Daughter Board Self-tapping #2 Mother Board Screw (2 Reqd.) Self-tapping #2 .104[2.64] Max. Screw (1 Reqd.) Thickness* Self-tapping #2 Screw (2 Reqd.) *Must be .063[1.59] thick for use with Double Slotted Card Guides. 69 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors (Continued) Card Guides Single Slotted Material: Glass-filled nylon, black 3.770 [1.532.238] .225 [1.0.8784] Dia. Part No. 583671-1 .210 [95.76] .170 [5.72] Thru Hole [5.33] [4.32] Related Product Data: 3.585 Connectors used with—page 65 [91.06] .137 .074[1.88] Dia. x [3.48] .175[4.45] Deep Technical Documents: (pages 186, 187): Instruction Sheets 408-7498, 408-7506 Single Slotted Card Guide and Connector Mounting Contact Dimensions [2.1.5040] ConnectorCenterline [2.0.3911] A E Centerline Dia. .100 .263 2.54 6.68 .125 .288 3.18 7.31 A .150 .313 .200 [0.0.8395] Dia. E [5.2.7225] 3.81 7.95 [5.08] Mounting Hole Min. .156 .319 3.96 8.10 7700 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors (Continued) Card Guides Double Slotted Without Stand-off (Continued) 1.680 .080 [42.67] Material: Nylon, natural [2.03] 1.500 .150 [38.10] [3.81] Part No. 583425-1 .540 [13.72] Related Product Data: Connectors used with—page 65 .300 .400 [7.62] [10.16] Technical Documents: (pages 186, 187): Instruction Sheets 408-7498, 408-7506 Double Slotted Card Guide and Connector Mounting Contact Centerline Dimensions .100 Connector [2.54] Centerline .310 A E [7.87] .100 .328 2.54 8.33 .125 .353 A .175 3.18 8.96 .200 .035 Dia. E [4.45] .150 .376 [5.08] [0.89] Min. 3.81 9.60 Mounting Hole .156 .384 3.96 9.75 Note:Mother Board must be .063[1.59] thick for use with Double Slotted Card Guides. Recommended PC Board Layout for Connectors With End Caps Contact .100 Connector Centerline .100 Dimensions [2.54] Centerline [2.54] A E Dia. .100 .267 2.54 6.78 .125 .317 A 3.18 8.05 .200 .035 Dia. E .150 .367 [5.08] [0.89] 3.81 9.32 Mounting Hole .156 .379 3.96 9.62 71 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors (Continued) Keying Plugs Material: Nylon, natural Technical Documents: (pages 186, 187): Instruction Sheet 408-7479 Type A Type B Intercontact On-Contact In-Row Type Connector Style* Intercontact Keying Plug On-Contact Keying Plug Contact of with without Type A Type B Insertion/Extraction Part Insertion/Extraction Spacing Contact End Caps End Caps Part Numbers Part Numbers Tool Numbers Tool .100 Solder Post 583715 583485 530286-3 — 91081-2 583714-1 91088-1 2.54 Card Extender 530268 530291 .125 Solder Post 583679 583533 530286-2 530030-1 91081-1 583714-1 91088-1 3.18 Card Extender 530265 530290 Solder Post 583692 583407 .150 Wrap-Type Post 583754 583752 530286-2 530030-1 91081-1 — — 3.81 Card Extender 530278 530270 Solder Post 583660 583486 .156 Wrap-Type Post 583755 583753 530286-2 530030-1 91081-1 — — 3.96 Card Extender 530267 530282 *Refer to pages 66-68, as applicable, for specific connector sizes. Connector Dimension A A Centerlines Intercontact On-Contact .100 .040 .129 2.54 1.02 3.28 .475 .125 .050 .129 [12.06] 3.18 1.27 3.28 Min. .150 .050 .160 3.81 1.27 4.06 .156 .050 .160 3.96 1.27 4.06 Recommended PC Board Cutout for Keying Plugs Other Twin Leaf Card Extender Connectors Mother Board Connectors .400 [10.16] Fits for For more information on the connec- .055-.070 tors shown here, consult Tyco [1.4-1.78] Connectors With End Caps PCBoard Electronics. Part Number .225 Centerlines Series* [5.72] .150 530278 3.81 .610 .156 [15.49] 530267 3.96 *Consult Tyco Electronicsfor specific connector sizes. 7722 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors Product Facts n Zero insertion force; little or no effort required to insert and withdraw PC boards n Reduced pad wear for extended board life n Allows all four sides of board to be used for input/output functions n Accepts double-sided boards n Three contact styles to choose from: vertical solder post, right-angle solder post and wrap-type post (2 and 3 high) n Available in .100 [2.54], .125 [3.18] and .156 [3.96] centerlines n Three configurations avail- able: open one end, open both ends and closed both ends n Products indicated are recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 AMP Rotary Cam Zero 1.78] thick, with contact feature housings made from Performance Specifications Insertion Force (ZIF) Card centerline intervals of .100 94V-0 rated glass-filled Current vs. Temperature Rise*: Edge Connectors are avail- [2.54], .125 [3.18] and .156 polyester and mounting 3 amperes at 30°C able in sizes to fit most [3.96]. Row-to-row spacing ears for easy mounting to industry-standard printed of connector posts is .200 the mother board. Housings Operating Temperature: –55°C to +105°C circuit boards. A clockwise [5.08] for .100 [2.54] and are available with one end rotation of the cam handle .156 [3.96] connectors and open, both ends open and Contact Resistance: opens contacts to allow .250 [6.35] for .125 [3.18] both ends closed for side 20 milliohms max. zero-force insertion or connectors. and top daughter board Durability:Tested to 5000 cycles removal of PC boards— insertion. Integral board Contacts are nickel under- even boards with a large locks secure boards in the plated phosphor bronze number of contacts. Turning connectors. Accessories with gold plate in the the cam handle to close the include dust covers, cam contact area and tin-lead connector locks the board rods (with and without plated posts. Contact con- securely in place. Rotary boots) and cam keys for figurations include vertical Cam ZIFConnectors nut-driver actuation and and right-angle solder posts accept double-sided PC for tandem operation of and wrap-type posts. boards .054-.070 [1.37- connectors. Preassembled connectors *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 73 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .100 x .200 [2.54 x 5.08] Centerline Vertical Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- .130[3.3] Dia. Holes 45204 in contact area; .000100 Closed End .250[6.35] Dia. C’Bore [0.00254] tin-lead per MIL-P-81728 .080[2.03] Deep on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 .440 .370 [11.18] [9.40] Related Product Data: Board Lock Feature—On connectors open one end and open both ends B Daughter PC Board—.054-.070 [1.37-1.78] thick Closed Performance Specifications— .150 Position page 73 [3.81] Dust Cover—page 79 .250 PC Board Hole Layout and Edge [6.35] 1.095 Patterns—pages 81, 82 [27.81] Special Application—pages 82, 96 Ref. .850 .050 [21.60] [1.27] Technical Documents: (pages 186, 187): P10ro8d-9u0ct4 S8pecification [5.2.3130] [2.1.5040] [0.T0.y62p45.] E [0.T0.y41p68.] Instruction Sheet 408-7911 Typ. A .200 D [5.08] C No. of Dimensions Part Numbers Dual Open Open Closed Positions A B C D E* One End1 Both Ends1 Both Ends 2.100 2.800 3.100 2.300 .125 1-531020-1 — 1-531019-1 22 53.34 71.12 78.74 58.42 .160 1-531020-1 — — 2.400 3.100 3.400 2.600 .125 1-531020-2 — 1-531019-2 25 60.96 78.74 86.36 66.04 .160 1-531020-2 — — 2.700 3.400 3.700 2.900 28 .160 21-531020-3 — — 68.58 86.36 93.98 73.66 3.000 3.700 4.000 3.200 31 .160 2-531020-1 — — 76.20 93.98 101.60 81.28 3.500 4.200 4.500 3.700 .125 3-531020-2 — 1-531019-4 36 88.90 106.68 114.30 93.98 .160 1-531020-4 — — 3.900 4.600 4.900 4.100 .125 1-531020-5 — — 40 99.06 116.84 124.46 104.14 .160 1-531020-5 — — .125 3-531020-3 — — 4.200 4.900 5.200 4.400 43 1-531020-7 — — 106.68 124.46 132.08 111.76 .160 22-531020-82 — — .125 1-531020-8 531021-8 — 4.900 5.600 5.900 5.100 50 1-531020-8 — 1-531019-8 124.46 142.24 149.86 129.54 .160 22-531020-92 — — 5.900 6.600 6.900 6.100 60 .160 1-531020-9 1-531021-9 1-531019-9 149.86 167.64 175.26 154.94 .125 1-531020-0 — — 6.400 7.100 7.400 6.600 65 2-531020-0 — — 162.56 180.34 187.96 167.64 .160 23-531020-02 — — *Metric equivalents in millimeters for post lengths Eare .125= [3.18]; .160= [4.06]. 1Recognized under the Component Program of Underwriters Laboratories Inc. 2Connectors without cam rod and boardlock. Notes: 1. Connector with card slot open one end is shown for illustration purposes. 2. Other connector sizes can be made available, consult Tyco Electronics. 7744 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .100 x .200 [2.54 x 5.08] Centerline (Continued) Right-Angle Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Board Lock Feature—On connectors .130[3.3] Dia. Holes open one end and open both ends Closed End .250[6.35] Dia. C’Bore .080[2.03] Deep Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— .440 .370 page 73 [11.18] [9.40] Dust Cover—page 79 PC Board Hole Layout and Edge Patterns—pages 81, 82 B Special Application—page 82, 96 Closed Technical Documents: .150 Position [3.81] (pages 186, 187): .250 Product Specification [6.35] 108-9048 1.095 [27.81] Instruction Sheet 408-7911 Ref. .160 .850 [4.06] [21.60] .050 [1.27] .025 .210 [0.64] [5.33] Typ. .100 [2.54] Typ. .025 A [0.64] Typ. .200 D [5.08] .100 C [2.54] Bend Right Shown No. of Dimensions Bend Part Numbers Dual Positions A B C D Right (Open End1) 2.400 3.100 3.400 2.800 25 R 1-531395-23 60.96 78.74 86.36 71.12 3.500 4.200 4.500 3.700 36 R 1-531396-4 88.90 106.68 114.30 93.98 4.900 5.600 5.900 5.100 50 L 1-531396-8 124.56 142.24 149.86 129.54 6.400 7.100 7.400 6.600 65 R 1-531396-0 162.56 180.34 187.96 167.64 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes: 1. Connector with card slot open one end is shown. 2. Other connector sizes can be made available, consult Tyco Electronics. 3. Open both ends. 75 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .100 x .200 [2.54 x 5.08] Centerline (Continued) Vertical Connector, Wrap-Type Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: .130[3.3] Dia. Holes Closed End .250[6.35] Dia. C’Bore Board Lock Feature—On connectors .080[2.03] Deep open one end and open both ends Daughter PC Board—.054-.070 .440 .370 [11.18] [9.40] [1.37-1.78] thick Performance Specifications— page 73 B Dust Cover—page 79 PC Board Hole Layout and Edge Patterns—pages 81, 82 Closed .150 Position Special Application—pages 82, 96 [3.81] .250 Technical Documents: [6.35] (pages 186, 187): 1.095 [27.81] Product Specification Ref. .050 108-9048 .850 [1.27] [21.60] Instruction Sheet 408-7911 .025 .210 [0.64] E .025 [5.33] Typ. [0.64] .100 Typ. [2.54] Typ. A .200 D [5.08] C No. of Dimensions Part Numbers Dual Open Open Positions A B C D E* One End1 Both Ends1 2.400 3.100 3.400 2.600 25 .380 1-531414-2 — 60.96 78.74 86.36 66.04 3.500 4.200 4.500 3.700 .580 1-531414-4 1-531415-4 36 88.90 106.68 114.30 93.98 .380 1-531414-4 — 3.900 4.600 4.900 4.100 40 .580 1-531414-5 — 99.06 116.84 124.46 104.14 4.100 4.800 5.100 4.300 42 .380 1-531414-6 — 104.14 121.92 129.54 109.22 50 4.900 5.600 5.900 5.100 .580 2-531414-4 1-531415-8 124.46 142.24 149.86 129.54 5.900 6.600 6.900 6.100 60 .580 1-531414-9 — 149.86 167.64 175.26 154.94 6.400 7.100 7.400 6.600 65 .580 1-531414-0 — 162.56 180.34 187.96 167.64 *Metric equivalents in millimeters for post lengths Eare .5 8 0 = [14.73] (3-high wrap-type); .3 8 0 = [9.65] (2-high wrap-type). 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes: 1. Connector with card slot open one end is shown for illustration purposes. 2. Other connector sizes can be made available, consult Tyco Electronics. 7766 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .125 x .250 [3.18 x 6.35] Centerline Vertical Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Board Lock Feature—On connectors .130[3.3] Dia. Holes open one end and open both ends Closed End .250[6.35] Dia. C’Bore .080[2.03] Deep Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— .440 .370 page 73 [11.18] [9.40] Dust Cover—page 79 PC Board Hole Layout and Edge Patterns—pages 81, 82 B Special Application—pages 82, 96 Closed Technical Documents: .150 Position [3.81] (pages 186,187): .250 Product Specification [6.35] 108-9048 1.095 [27.81] Instruction Sheet 408-7911 Ref. .850 .050 [21.60] [1.27] .025 .210 [0.64] E .018 [5.33] .125 Typ. [0.46] [3.18] Typ. Typ. A .250 D [6.35] C No. of Dimensions Part Numbers Dual Open Open Positions A B C D E* One End1 Both Ends1 3.375 4.125 4.425 3.625 28 .125 — 1-531024-3 85.73 104.76 112.40 92.08 3.625 4.375 4.675 3.875 30 92.08 111.13 118.75 98.43 .125 1-531023-4 — 4.875 5.625 5.925 5.125 40 .160 1-531023-4 1-531024-4 123.83 142.88 150.50 130.18 *Metric equivalents in millimeters for post lengths Eare .1 2 5 = [3.18]; .1 6 0 = [4.06]. 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes: 1. Connector with card slot open one end is shown for illustration purposes. 2. Other connector sizes can be made available, consult Tyco Electronics. 77 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .156 x .200 [3.96 x 5.08] Centerline Vertical Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: .130[3.3] Dia. Holes Closed End .250[6.35] Dia. C’Bore Board Lock Feature—On connectors .080[2.03] Deep open one end and open both ends Daughter PC Board—.054-.070 [1.37-1.78] thick .440 .370 [11.18] [9.40] Performance Specifications— page 73 Dust Cover—page 79 B PC Board Hole Layout and Edge Patterns—pages 81, 82 Special Application—pages 82, 96 Closed .150 Position [3.81] Technical Documents: .250 (pages 186, 187): [6.35] 1.095 Product Specification [27.81] 108-9048 Ref. Instruction Sheet 408-7911 .850 .050 [21.60] [1.27] .025 .210 [0.64] E .018 [5.33] .156 Typ. [0.46] [3.96] Typ. A Typ. .200 D [5.08] C No. of Dimensions Part Numbers Dual Open Open Closed Positions A B C D E* One End1 Both Ends1 Both Ends 3.276 4.088 4.388 3.588 .125 531025-3 — — 22 83.21 103.83 111.46 91.14 .160 531025-9 — 531007-9 5.460 6.272 6.572 5.772 36 138.68 159.31 166.93 146.61 .160 — 1-531026-1 — 6.552 7.364 7.664 6.864 43 .125 531025-6 — — 166.42 187.05 194.67 174.35 *Metric equivalents in millimeters for post lengths Eare .1 2 5 = [3.18]; .1 6 0 = [4.06]. 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes: 1. Connector with card slot open one end is shown for illustration purposes. 2. Other connector sizes can be made available, consult Tyco Electronics. 78 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Accessories Dust Covers A Material: Rigid vinyl, black Dimension Part A Numbers 11.050 531863-2 280.67 48.000 531863-1 1219.20 Note:Other lengths can be made available upon request, consult Tyco Electronics. .348 [8.84] Cam Rods with Boot Material: .654 Cam Rod—Stainless steel .835 [16.61] [21.21] Boot—Glass-filled polyester, yellow .200 .200 [5.08] [5.08] .400 A [10.16] Dimension Part Dimension Part A Numbers A Numbers 3.185 6.385 650083-1 650083-7 80.90 162.18 3.705 6.985 650083-2 650083-8 94.11 177.42 4.470 7.485 650083-3 650083-9 113.54 190.12 5.285 7.725 650083-4 1-532563-0 134.24 196.22 5.900 8.320 650083-6 1-650083-7 149.86 211.34 5.975 532563-7 Note:Other lengths can be made avail- 151.77 able upon request, consult Tyco Electronics. 79 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Accessories (Continued) Cam Rods without Boot .125 [3.18] Material: Stainless steel .775 [19.69] .055 .200 .045 [1.40] [5.08] [1.14] A Dimension Part Dimension Part A Numbers A Numbers 2.200 6.000 2-531004-8 2-531004-7 55.88 152.40 2.700 6.250 2-531004-9 1-531004-6 68.58 158.75 3.300 6.750 3-531004-0 1-531004-7 83.82 171.45 4.750 8.250 2-531004-4 3-531004-2 120.65 209.55 5.000 12.500 1-531004-4 2-531004-0 127.00 317.50 5.500 139.70 2-531004-6 Note:Other lengths can be made avail- able upon request, consult Tyco Electronics. .125 [3.18] .252 [6.40] [1.0.4505] [6.2.6600] [1.0.1445] A Dimension Part A Numbers 3.380 645293-3 85.85 4.50 645293-8 114.30 5.200 645293-6 132.08 6.90 645293-7 175.30 13.120 645293-5 333.25 Note:Other lengths can be made avail- able upon request, consult Tyco Electronics. 80 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Recommended PC Board Hole Layouts Mother Board Hole Layout, Vertical Through-Board Connectors [3.1.2258] Dia. [1.0.2428] Dia. Typ. (2 Plc.) W CL X A* B* *Refer to individual connector specifications. CL W X .100 .200 .350 2.54 5.08 8.89 .125 .250 .375 2.18 6.35 9.53 .156 .200 .406 3.96 5.08 10.31 Mother Board Hole Layout, Right-Angle Through-Board Connectors .200 .100 Typ. [5.08] [2.54] .048 Pin No. 1 (Ref.) [1.22] Dia. Typ. .400 Max. [10.16] A* PCBoard Edge *Refer to individual connector specifications. 81 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Recommended PC Board Edge Pattern Daughter Board Edge Pattern .700 [17.78] Min. .270 [6.86] Min. CL C+.005 CL Minus.006 [0.15] -.000 [+0.13] A B±.005 [±0.13] No. of CL = .100 [2.54] CL = .125 [3.18] CL = .156 [3.96] Dual C = .050 [1.27] C = .078 [1.98] C = .094 [2.39] Positions A B A B A B 2.100 2.288 3.267 3.576 22 — — 53.34 58.12 83.21 90.83 2.400 2.588 25 — — — — 60.96 65.74 2.700 2.888 3.375 3.613 28 — — 68.58 73.36 85.73 91.77 3.625 3.863 30 — — — — 92.08 98.12 3.000 3.188 31 — — — — 76.20 80.98 3.500 3.688 5.460 5.760 36 — — 88.90 93.68 138.68 146.30 3.900 4.088 4.875 5.113 40 — — 99.06 103.84 123.83 129.87 4.200 4.388 6.552 6.852 43 — — 106.68 111.46 166.42 174.04 4.900 5.088 50 — — — — 124.46 129.24 5.900 6.088 60 — — — — 149.86 154.64 6.400 6.588 65 — — — — 162.56 167.34 Special Application Tandem Application Special Rod (Part No. Series 645293) Allows Customer Supplied Nut Driver Actuation (Refer to page 80.) Note: Contact Tyco Electronics for information concerning special tandem connectors. 82 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors Product Facts n Minimizes force needed to install and remove printed circuit boards n Available in lever and bell crank styles n Lever styles allow side and top card entry n Wiping action contacts enhance electrical properties n Contacts on .100 x .100 [2.54 x 2.54] or .125 x .125 [3.18 x 3.18] centers n .025 [0.64] square posts n Accepts PC boards from .054 to .070 [1.37 to 1.78] in thickness n Normally closed design leaves springs in relaxed position n 50 to 175 dual positions available on .100 [2.54] centerline connectors and 40 to 140 dual positions available on .125 [3.18] centerline connectors Performance Specifications AMP Linear Zero Insertion required, Tyco Electronics and housing modules with- Current vs. Temperature Rise*: Force (ZIF) PC Board Edge has a line of preassembled out removing the entire 3 amperes at 30°C Connectors are available in connectors with tin-plated housing assembly from the Operating Temperature: both lever and bell crank solder terminals. All these board. –65°C to +85°C actuated styles and can be configurations are available Contact Resistance: provided as panel assem- in a broad range of sizes. 16 milliohms max. blies, separate housings With ZIF style connectors, Durability:Tested to 250 cycles and contacts or as pre- intermittencies can occur if (board-to-contact actuation) assembled with solder post a contact comes to rest on terminals. a piece of foreign matter Panel assemblies include a (dust and dirt particles) housing with ACTION PIN found on PC boards. To press-fit solderless contacts decrease the probability of mounted on an epoxy this happening, all connec- board for rack application. tors have been designed to Separate housing assem- include a wiping contact blies and ACTION PIN con- which produces a wiping tacts allow customer action. This action, pro- assembly. These can be duced by the geometry and mounted as close as .625 bending movements of the [15.88]. More design lati- beam, pushes aside debris tude for high density appli- and allows for good electri- cation is provided by the cal connection by cleaning side entry lever-type con- the actual point of contact. nector, permitting use of all In addition, all connectors sides of the PC board for have removable wings edge-type I/O connections which make it possible to *Consult Tyco Electronicsengi- (see page 133). Where neering when paralleling con- repair or replace damaged solder applications are tacts for power applications. cam rails, handles, contacts 83 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline Housing with Solder Posts Lever Style, Side Entry Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] min. gold per MIL-G-45204 in contact area; .000100 [0.00254] min. tin-lead on post with entire contact underplated .000050 [0.00127] min. nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 88 Special Application—page 96 Technical Documents: (pages 186, 187): Product Specification 108-14015 Application Specification 114-26003 Instruction Sheets 408-2995, 408-2999, 408-6915 .450 A [11.43] B .500 [12.70] CL Last Contact Position CL First Contact Position Max. .355 [9.02]* Closed .103 C Closed End [2.62] .600 .845 Open Open End [15.24] [21.46] P .100 P [2.54] Typ. .845 Mounting .206 .175 [21.46] .100 Hole CL [5.23] [4.45] [2.54] Mounting [4.1.8930] 1.075 Hole CL [27.31] Section P-P *Card slot depth. NDou. aolf Dimensions Part Positions A B C Number 6.113 3.400 2.000 35 1-645135-2 155.27 86.36 50.80 11.613 7.900 3.000 80 1-645135-1 294.97 200.66 76.20 13.613 9.900 3.000 100 1-645135-5 345.77 251.46 76.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 84 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Panel Assembly Lever Style, Side Entry Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge .343 PC Board Pattern—page 88 Channel [8.71] .355 Max. [9.02] ACTION PIN Contacts— Card Slot pages 88, 94 Depth Tooling—page 95 Open End Closed End Special Application—page 96 C Technical Documents: 1.555 (pages 186, 187): [39.50] Product Specification .125 108-14015 [3.18] D Application Specification 1.425 [36.16] 114-26003 .150[3.81] A .812 Instruction Sheets 408-2995, Countersunk [20.62] 408-2999, 408-6915 Hole (2 Plcs.) .100 .100 .750 [2.54] [2.54] [19.05] Typ. B No. of Dimensions Part Dual Positions A B C D Numbers 7.400 10.125 3.000 .615 75 1-645145-0 251.46 320.68 76.20 15.62 9.900 12.625 3.000 .615 100 1-645145-5 251.46 320.68 76.20 15.62 12.900 15.625 3.000 .615 130 2-645145-1 251.46 320.68 76.20 15.62 13.900 16.625 3.000 .615 140 2-645145-3 353.06 422.28 76.20 15.62 14.900 17.625 3.000 .615 150 2-645145-5 251.46 320.68 76.20 15.62 15.900 18.625 3.000 .615 160 2-645145-7 403.86 473.07 76.20 15.62 15.900 18.625 3.000 .455 160 147400-1 403.86 473.07 76.20 11.56 Note:Other connector sizes can be made available, consult Tyco Electronics. 85 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Panel Assembly Lever Style, Top Entry Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 88 ACTION PIN Contacts— pages 88, 94 Tooling—page 95 PC Board .343 Channel [8.71] .355 Max. [9.02] Technical Documents: Card Slot Depth (pages 186, 187): Closed End Closed End Product Specifications C 108-14015, 108-26003 Application Specification 114-26003 1.555 [39.50] Instruction Sheets 408-2995, 408-2999, 408-6915 .125 [3.18] .615 1.425 [15.62] [36.16] .150[3.81] A .812 Countersunk [20.62] Hole (2 Plcs.) .100 .100 .750 [2.54] [2.54] [19.05] Typ. B No. of Dimensions Part Dual Positions A B C Numbers 10.900 13.625 3.000 110 1-645147-7 276.86 346.08 76.20 11.900 14.625 3.000 120 1-645147-9 302.26 371.48 76.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 86 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Housing Lever Style, Side Entry Material: Glass-filled polyester, black Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Mounting Screws—Customer sup- plies, must be applied before opening connector Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 88 ACTION PIN Contacts— pages 88, 94 Tooling—page 95 Special Application—page 96 A Ref. Technical Documents: (pages 186, 187): B P10ro8d-1u4ct0 S15p,e c1i0fi8c-a2ti6o0n0s3 Closed CL Last Contact Position CL First Contact Position Application Specification Open End Closed End 108-26003 C Open P Instruction Sheets 408-2995, 408-2999, 408-6915 .450 [11.43] P Mounting .206 .355 Hole CL [5.23] [9.02]* .815 [20.70] .600 [15.24] No. of Dimensions Part Dual Positions A B C Numbers 7.613 4.900 2.000 50 645115-5 193.37 124.46 50.80 1- Section P-P 75 11.113 7.400 3.000 1-645115-0 282.27 187.96 76.20 11.613 7.900 3.000 80 1-645115-1 *Card slot depth. 294.97 200.66 76.20 13.613 9.900 3.000 100 1-645115-5 345.77 251.46 76.20 14.613 10.900 3.000 1-645115-7 110 371.17 276.86 76.20 3-645115-2 15.113 11.400 3.000 115 1-645115-8 383.87 289.56 76.20 16.113 12.400 3.000 125 2-645115-0 409.27 314.96 76.20 16.613 12.900 3.000 130 2-645115-1 421.97 327.66 76.20 17.613 13.900 3.000 140 2-645115-3 447.37 353.06 76.20 19.613 15.900 3.000 160 3-645115-3 498.17 403.86 76.20 21.113 17.400 3.000 175 3-645115-0 536.27 441.96 76.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 87 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) ACTION PIN Contacts with Wiping Feature, Recommended PC Board Hole Layout and Edge Pattern, .100 [2.54] Centerline .100 [2.54] Centerline Material and Finish: Related Product Data: Mother Board Hole Layout .047 Dia. Typ. Copper alloy 725, plated .000015 Performance Specifications— [1.19] [0.00038] gold per MIL-G-45204 in page 83 (Solder Post Only)* .120 contact area; .000001 [0.00003] min. ACTION PIN Contact Description [3.05] Dia. gold flash per MIL-G-45204 on post and Application Specification— with entire contact underplated .000050 page 94 [0.00127] nickel per QQ-N-290 Tooling—page 95 CL Technical Documents: C B (pages 186, 187): *For ACTION PIN post hole diameter, see page 94. Instruction Sheet 408-2665 Connector Dimensions Style CL A B C .100 .100 .206 .175 A Lever 2.54 2.54 5.23 4.45 (Comb) .045 [1.14] Contact Area Daughter Board Edge Pattern Prenotched for Breakoff at Assembly .745 [18.92] [1.56.0204] Ref. [.52.0008] Min. 1.485 B [37.72] Min. Prenotched for Breakoff .100 .070 at Assembly [2.54] [1.78] .740 [18.80] .098 Typ. Post Area [2.49] A .100(No. of Pos. –1) +.196 Max. [2.54 (No. of Pos. –1) +4.98] .100 .025 Sq. [2.54] [0.64] Contact Combs Number of Dimension Part Connector Entry Dimensions Contacts A Number Style Style A B Per Comb* .240 55 5.400 4-119311-1 Side 6.10 — 137.16 Lever .240 .320 Top *At least two (2) contact combs required per housing. 6.10 8.13 Note:Other sizes can be made available, consult Tyco Electronics. Reeled Contacts Number of Part Contacts Number Per Reel 35,000 119196-6 Note:Other plating combinations and thicknesses can be made available, consult Tyco Electronics. 88 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline Panel Assembly Lever Style, Side Entry Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 Special Application—page 96 PCCh aBnonaerdl [.83.4731]Max. .355 [9.02] Technical Documents: Card Slot Depth (pages 186, 187): Open End Closed End C Instruction Sheets 408-2995, 408-6915, 408-6916 .615 [15.62] 1.555 [39.50] .125 [3.18] 1.425 [36.16] .812 .150 [3.81] A [20.62] Countersunk Hole (2 Plcs.) .125 Typ. .125 .750 [3.18] [3.18] [19.05] B No. of Dimensions Part Dual Positions A B C Numbers 4.875 7.625 2.000 40 1-645146-5 123.83 193.68 50.80 6.875 9.625 3.000 56 1-645146-9 174.63 244.48 76.20 7.375 10.125 3.000 60 1-645146-0 187.32 257.17 76.20 8.875 11.625 3.000 72 1-645146-3 225.43 295.28 76.20 10.375 13.125 3.000 84 1-645146-6 250.83 320.68 76.20 15.375 18.125 3.000 124 2-645146-6 390.53 460.38 76.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 89 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) Panel Assembly Bell Crank Style, Top Entry Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 Technical Documents: .935 Max. (pages 186, 187): [23.75] Instruction Sheets 408-2995, .355 [9.02] 408-6915, 408-6916 Card Slot 3.620 Ref. Depth Closed End [91.95] (Open) 1.555 [39.50] .125 [3.18] .615 [15.62] 2.41 .609 A [54.38] [15.47] .125 .125 [3.18]Typ. [3.18] .750 [19.05] B No. of Dimensions Part Dual Positions A B Numbers 7.375 10.625 60 1-645149-0 187.33 269.88 9.875 13.125 80 1-645149-5 250.82 333.38 13.875 17.125 112 2-645149-3 352.43 434.98 17.375 20.625 140 3-645149-0 441.33 523.88 Note:Other connector sizes can be made available, consult Tyco Electronics. 90 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) Housing Lever Style, Side Entry Material: Glass-filled polyester, black Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Mounting Screws—Customer supplied, must be applied before opening connector Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 Special Application—page 96 Technical Documents: (pages 186, 187): Instruction Sheets 408-2995, 408-6915, 408-6916 .475 [12.07] A Ref. .355 [9.02]* B .815 Closed CLFirst Contact Position CLLast Contact Position [20.7] .600 .115 [15.24] C Open Open End PClosed End [2.92] 1.087 Section P-P [27.61] P Mounting Hole .218 Mounting Hole *Card slot depth. CL [5.54] CL No. of Dimensions Part Dual Positions A B C Number 14.112 10.375 3.000 84 1-645116-6 358.44 263.52 76.20 16.112 12.375 3.000 100 2-645116-0 409.24 314.33 76.20 17.612 15.775 3.000 112 2-645116-3 447.34 400.68 76.20 19.112 17.275 3.000 124 2-645116-6 485.44 438.78 76.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 91 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) Housing Bell Crank Style, Top Entry Material: Glass-filled polyester, black Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Mounting Screws—Customer supplied, must be applied before opening connector Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 Technical Documents: (pages 186, 187): Instruction Sheets 408-2995, 408-6915, 408-6916 A .475 [12.07] 1.062 Ref. [26.97] (Open) 1.874 .312 B [47.60] [7.92] CLFirst Contact Position CLLast Contact Position .355 .500 [9.02]* [12.70] Closed End .115 .815 2.562 .115 P [2.92] [20.7] [65.07] [2.92] (Closed) .600 1.820 [15.24] [46.23] Mounting Hole .187 Mounting Hole 1.250 P CL [4.75] [31.75] CL Section P-P *Card slot depth. No. of Dimensions Part Dual Positions A B Numbers 8.562 6.375 52 1-645142-8 217.47 161.93 9.562 7.375 60 1-645142-0 242.87 187.32 13.125 9.875 80 1-645142-5 333.37 250.82 16.062 13.875 112 2-645142-3 407.97 352.43 Note:Other connector sizes can be made available, consult Tyco Electronics. 92 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) ACTION PIN Contacts with Wiping Feature, Recommended PC Board Hole Layout and Edge Pattern, .125 [3.18] Centerline .125 [3.18] Centerline Material and Finish: Related Product Data: Mother Board Hole Layout .047 Dia. Typ. Copper alloy 725, plated .000015 Performance Specifications— [1.19] [0.00038] gold per MIL-G-45204 in page 83 (Solder Post Only)* .120 contact area; .000001 [0.00003] min. ACTION PIN Contact Description [3.05] Dia. gold flash per MIL-G-45204 on post and Application Specification— with entire contact underplated .000050 page 94 [0.00127] nickel per QQ-N-290 Tooling—page 95 CL Technical Documents: C B (pages 186, 187): *For ACTION PIN post hole diameter, see page 94. Instruction Sheet 408-2665 Connector Dimensions Style CL A B C .125 .125 .218 .187 A Lever 3.18 3.18 5.54 4.75 (Comb) .125 .125 1.250 .187 Bell-Crank 3.18 3.18 31.75 4.75 .045 [1.14] Contact Area Prenotched for Breakoff at Assembly Daughter Board Edge Pattern .750 [19.05] .600 Ref. [15.24] 1.490 [37.85] .200 Min. [5.08] B .740 Min. [18.80] Post Area .125 .090 Typ. [3.18] [1.78] .110 .125 .025 Sq. [2.79] Typ. [3.18] [0.64] A .125(No. of Pos. –1) +.220 Max. [3.18 (No. of Pos. –1) +5.59] Contact Combs Number of Dimension Part Connector Entry Dimensions Contacts A Number Style Style A B Per Comb* .240 56 6.875 1-119950-2 Side 6.10 — 174.63 Lever .240 .320 Top *At least two (2) contact combs required per housing. 6.10 8.13 Note:Other sizes can be made available, consult Tyco Electronics. Bell-Crank Top .775 .600 19.68 15.24 93 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide break-through and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PCBoard Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PINcontacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- (cid:192) Annular Ring (See Note) nector being used must be followed. ` Drilled Hole ´ Copper Thickness ˆ Tin-Lead Thickness ˜ Plated Through-Hole ACTION PIN Contact/PC Board Applications Connector ACTION PIN Drilled Hole Plating Thicknesses Plated Radial Hole Distortion Type MaterCiaol nTthaicctkness Diameter` Copper´* Tin-Leadˆ ThDrioaumgeht-eHr˜ole Average Maximum .0003 .025 .0453±.001 .001-.003 .037-.043 Not Not Linear ZIF 0.008 0.64 1.151±0.03 0.03-0.08 0.94-1.09 Specified Specified Min. *Maximum hardness of copper layer is 150 Knoop. Note:Recommended annular ring diameter is hole diameter plus .020[0.51]. 94 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors (Continued) Tooling Assembly tooling is not Typical procedure is to required except when place a PC board on the using connectors with support fixture, insert contact ACTION PIN contacts. combs into the printed circuit ACTION PINcontact board with the contact appli- assembly requires an cator and seat with the arbor arbor-style bench tool with a tool. Next, remove the carrier capacity of 40 lb [178 N] per strip from the contact combs contact, a support fixture, with the carrier break-off tool. contact applicator, carrier Place the housing over the removal tool and housing contacts with the housing assembly tool. assembly tool, and repeat the entire process until the board is complete. .100 x .100 [2.54 x 2.54] Centerline Connectors No. of T-Bar Carrier Housing Housing Wing Removal/ Housing Contact Replacement Tools Dual Removal Assembly Removal Replacement Insertion Positions Applicator Tool Tool Tool Tool Tool With Housing Without Housing 50 266267-4 265924-4 313136-1 80 266267-3 265924-4 313136-2 100 266267-4 265924-4 110 266267-5 265924-4 313136-3 115 266267-5 265924-4 313256-1 266233-1 266264-1 266235-1 3-265871-2 120 266267-5 265924-4 125 266267-4 265924-4 313136-4 140 266267-4 265924-4 175 266267-5 265924-4 313136-5 .125 x .125 [3.18 x 3.18] Centerline Connectors No. of T-Bar Carrier Housing Housing Wing Removal/ Housing Contact Replacement Tools Dual Removal Assembly Removal Replacement Insertion Positions Applicator Tool Tool Tool Tool Tool With Housing Without Housing 40 313139-1 265924-4 313136-1 52 313139-2 265924-6 56 313139-2 265924-6 313136-2 60 313139-2 265924-7 72 313139-3 265924-4 313256-1 266233-1 266264-1 266235-1 3-265871-2 313136-3 84 313139-2 265924-5 112 313139-2 265924-7 313136-4 124 313139-2 265924-5 313136-5 140 313139-2 265924-5 95 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors (Continued) Special Application Use Linear and Rotary ZIF Connectors as Card Guides to access more sides of the Daughter Board. Standard Edge II (pages 15 thru 27) or AMP PACE Connectors (pages 98 thru 115) 96 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) ACTION PIN Press-Fit Contacts The Reliable Plated Through- Hole Interconnect Solderless interconnections have been popular in elec- trical and electronic appli- cation with world-wide success for decades. They provide reliable electrical and mechanical stability and offer applied-cost sav- ings across the board. For PC board applications, ACTION PIN contacts from Tyco Electronics provide these features: n Large gas-tight contact zone n Reliability due to stored energy in compliant pin contacts n No damage to plated • Solder spots; short Principle of the Tyco to accommodate hole toler- through-holes during circuits between Electronics Compliant ances. The compliant pin installation printed circuits ACTION PIN Contact also reduces strain on the n Especially suited for mul- • Flux residuals When an ACTION PIN con- board. With a rigid pin, the tilayer PC boards elastic strain energy is • Thermal strain on tact is inserted into a plated stored entirely in the board, n Less costly board manu- printed circuit through-hole, two spring leading to damage of the facturing due to larger boards and members are compressed, plated through-holes. With hole tolerances com- components exerting force against the the ACTION PIN contact, pared to use of solid hole for gas-tight connec- • Degasing of plated the residual force of the pins tion. The diameter of the through-holes elastic deformation main- hole is smaller than the n Application can be tains stored energy to pro- Solderless press-fit inter- diagonal size of the pin made by end-user duce a tight contact zone connections using the (see cross-section illustra- n Repairability—contact ACTION PIN contact are tion below). between the pin and the can be replaced in the primarily integrated in, but plated through-hole. This same pin location (two not limited to, backplanes. The beam characteristics of provides long term electri- repairs) the pin are designed so cal and mechanical reliabili- Solderless press-fit inter- that a plastic, as well as an ty of the interconnection. n Installation with no heat connections are used in elastic, deformation takes cycling of board racks, especially where place during insertion. The connectors must be fixed n Permits mass insertion on the solder side of the PC two spring members com- by minimizing forces board and/or component press to different degrees needed to insert pins as side. In these applications, compared to solid pin the holes for ACTION PIN press-fit application contact connectors are cov- ered during the soldering n Significant applied-cost process and press-fitting is savings in many applica- performed after soldering. tions Other applications for Since ACTION PIN contacts ACTION PIN contact do not have to be soldered, interconnections include PC issues associated with sol- boards that incorporate der are eliminated, such as: components using surface Minimum Maximum • Faulty solder joints mount technology (SMT). Hole Dia. Hole Dia. Here, too, press-fit intercon- .037 [0.94] .043 [1.09] • Solder fumes; cont- nections can be applied aminant’s are after soldering, thus elimi- deposited on the nating complications Cross-Section Area from Tyco Electronics ACTION PIN Press-Fit contacts associated with connectors Contact in Printed Circuit Board Holes from Tyco Electronics. suitable for surface Note:ACTION PIN contact mounting hole specifications are presented in mounting. each product section, where applicable. 97 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors Performance Specifications Electrical Characteristics Contact Resistance:ACTION PIN Contact Interface—5 milliohm Spring Contact to Test Board—11.5 milliohms Total Circuit Resistance: 12 milliohms Continuous Current Rating*: 3 amperes Insulation Resistance: 5,000 milliohms Dielectric Withstanding Voltage: .100 [2.54] Centerline Spacing— 1,000 VAC at sea level; 350 VAC at 50,000 ft. [15,240 m]; 275 VAC at 70,000 ft. [21,336 m] .125 [3.18] Centerline Spacing— 1,500 VAC at sea level; 500 VAC at 50,000 ft. [15,240 m]; 235 VAC at 70,000 ft. [21,336 m] Physical Characteristics Card Insertion Force (Max.): 16 oz [4.45 N] per contact pair ACTION PINContact Post Card Extraction Force (Min.): 1 oz [.278 N] per contact pair ACTION PIN Contact Post Retention (in PC board): .100 x .100 [2.54 x 2.54]— 7.5 lb. [33.4 N] min. AMP PACE(Pre-Assembled are replaceable through the AMP PACE Connectors are Operating Temperature: Card Edge) Connectors are top of the connector available with post center- –55°C to +85°C the latest innovation in the housing, for maximum line spacings of: evolution of backplane archi- flexibility in your backplane .100 x .100 [2.54 x 2.54] Durability:Tested to 100 cycles (100 insertions and withdrawals at a rate not tecture. Designed to short- packaging. .100 x .200 [2.54 x 5.08] exceeding 10 cycles per minute) en manufacturing time and At the heart of the .125 x .125 [3.18 x 3.18] reduce applied costs, these .125 x .250 [3.18 x 6.35] Salt Spray:MIL-STD-1344, AMP PACE Connector is one-step, pre-assembled .156 x .200 [3.96 x 5.08] Method 1001 AMP’s proven and reliable connectors are ready for Physical Shock:MIL-STD-1344, ACTION PIN Contact. This Important: mounting and mass inser- Method 2004 unique contact has superior Application tooling is tion. In addition, design electrical and physical absolutely necessary to Thermal Shock:MIL-STD-1344, features such as removable characteristics that are top insert connectors into PC Method 1003, Cond. A housings and contacts, that of the line in the industry. boards. See page 115 for Humidity:MIL-STD-1344, application tooling. Method 1002, Type II Vibration:MIL-STD-1344, Method 2005 Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 98 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors (Continued) Product Facts Repairability— (See below for details) Individual contacts can be removed without removing the housing; housings can be removed without removing posts. Important:APC board must be inserted into the connector when removing the contact. Precision Plated Contacts— Selective plating puts gold where it is needed for superior electrical contact at a reasonable cost. Beam Contact Design— The contact’s unique beam design accommodates and compensates for daughter board warp and stress providing long-term, reliable performance (100 gram minimum normal force). Gas-Tight Connection— Spring sections of ACTION PIN Contacts compress in opposite directions, maintaining a gas-tight fit with the PC board. Contact Tip Alignment Strip— Polyester strip provides straight and stable pin alignment for damage-free entry into the PC board. Precision Plated Post— Gold plating can be applied to the entire post, or just the post tip for improved pluggability. Repairability Details Remove and replace contacts Remove and replace housing without removing housing. without removing contacts. (See page 115 for Contact Replacement Tools.) 99 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .100 [2.54 x 2.54] Centerline Standard Housing .100 [2.54] .380 [9.65] B .040 Min. [1.02] Contact Finish Area C ±.006 [±0.15] .415 [10.54] .005/.007 Card Slot [0.13/0.18] Depth See E Below Post Length and .025 .05A4c ctoep .t0s71 AlCigonnmtaecntt TSiptrip Finish Area [P0o.6s4t] Sq. [1.37 to 1.80] on .475[12.07] PC Boards Post Length .100 A [2.54] .100 [2.54] Typical Closed End/ Open End Housings .100 [2.54] Connectors can be .135 mounted in pairs using [3.43] any size combinations. Example: 1-30 pos. + 1-60 pos. Detail E = 1-90 pos. Keying Plugs Intercontact (Plastic) On-Contact (Plastic) Part No. 118982-1 Part No. 119802-2 100 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Material and Finish: No. of Dimensions Post Closed/Closed Closed/Open Dual Housing—Black glass-filled polyester, Positions A B C Length Standard Scoop Standard 94V-0 rated .180 119734-1 119736-1 — Contacts—Phosphor bronze, plated 1.400 1.734 1.604 4.57 gold .000030 [0.00076] min. thk. over 15 35.56 44.04 40.74 .475 119237-1 — — .000050 [0.00127] min. thk. nickel in 12.07 contact area, .000100 [0.00254] min. 20 1.900 2.234 2.104 .180 119734-6 — — 48.26 56.74 53.44 4.57 tin-lead on posts, with entire contact underplated .000050 [0.00127] min. 25 2.400 2.734 2.604 .180 1-119734-1 — — 60.96 69.44 66.14 4.57 nickel 2.700 3.034 2.904 .180 Contact Tip Alignment Strip—Clear 28 68.58 77.06 73.76 4.57 1-119734-4 — — polyester, type D 3.000 3.334 3.204 .475 31 1-119237-7 — — 76.20 84.68 81.38 12.07 Note:Full palladium-nickel plated .180 2-119734-1 — 119831-6 posts and other platings and plating 3.400 3.734 3.604 4.57 thicknesses can be made available. 35 83.36 94.84 91.54 .475 — — 119413-6 12.07 3.900 4.234 4.104 .180 40 2-119734-6 2-119736-6 — Related Product Data: 99.06 107.54 104.24 4.57 4.700 5.034 4.904 .475 Performance Specifications— 48 119.38 127.86 124.56 12.07 3-119237-4 — — page 98 4.900 5.234 5.104 .180 50 3-119734-6 — — Accessories—page 112 124.46 132.94 129.64 4.57 5.900 6.234 6.104 .180 PC Board Edge Pattern—page 113 60 4-119734-6 4-119736-6 — 149.86 158.34 155.04 4.57 ACTION PIN Contact Mounting Note:Other connector sizes and connectors with card scoops can be made available, consult Tyco Electronics. Hole Specifications—page 114 Application Tooling—page 115 Contact Replacement Tools— page 115 Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-2978, 408-2979, 408-6881, 408-9091, 408-9188 101 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .200 [2.54 x 5.08] Centerline Standard Housing .100 .364 [2.54] .360 [9.24] [9.14] B C ±.006 .415 [±0.15] [10.54] .005/.007 Card Slot .545 [0.13/0.18] Depth .040 Min. [13.84] [1.02] Contact See E Below Finish Area Post Length and .025 Finish Area [0.64] Sq. Accepts AlCigonnmtaecntt TSiptrip Post [.20.9336] Min. .054 to .071 on .475[12.07] [1.37 to 1.80] and .702[17.83] PC Boards Post Lengths .200 A [5.08] .100 [2.54] Housing with High Card Scoops .100 [2.54] .390 .364 B [9.91] [9.24] C[±±.00.0165] [1.531.058] .005/.007 Card Slot .645 [0.13/0.18] Depth .040 Min. [16.38] [1.02] Contact See E Below Finish Area Post Length and .025 Sq. Finish Area [0.64] Accepts Post .093 Min. .054 to .071 Contact Tip [2.36] [1.37 to 1.80] Alignment Strip PC Boards on .475[12.07] .200 and .702[17.83] [5.08] A Post Lengths .100 [2.54] Keying Plugs Intercontact (Plastic) Part No. 118982-1 .135 [3.43] On-Contact (Plastic) Detail E Part No. 119802-2 102 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .200 [2.54 x 5.08] Centerline (Continued) Material and Finish: No. of Dimensions Post Closed End/Closed End Dual Housing—Black glass-filled polyester, Positions A B C Length Standard High Scoop 94V-0 rated .900 1.234 1.104 .180 10 — 1-650297-1 Contacts—Phosphor bronze, plated 22.86 31.34 28.04 4.57 gold .000030 [0.00076] min. thk. over 1.400 1.734 1.604 .180 15 1-119738-1 119791-1 .000050 [0.00127] min. thk. nickel in 35.56 44.04 40.74 4.57 contact area, .000100 [0.00254] min. 18 1.700 2.034 1.904 .180 1-119738-4 — 43.18 51.66 48.36 4.57 tin-lead on posts, with entire contact underplated .000050 [0.00127] min. 20 1.900 2.234 2.104 .180 1-119738-6 — 48.26 56.74 53.44 4.57 nickel .180 Contact Tip Alignment Strip—Clear 2.100 2.434 2.304 4.57 1-119738-8 — polyester, type D 22 53.34 61.82 58.52 .475 1 -119216-8 650123-8 12.07 Note:Full palladium-nickel plated 2.300 2.634 2.504 .180 24 1-119738-0 — posts and other platings and plating 58.42 66.90 63.60 4.57 thicknesses can be made available. .180 1-119738-1 — 2.400 2.734 2.604 4.57 25 60.96 69.44 66.14 .702 1-119163-1 — Related Product Data: 17.83 .180 Performance Specifications— 2.700 3.034 2.904 4.57 1-119738-4 — page 98 28 68.58 77.06 73.76 .475 1-119216-4 — Accessories—page 112 12.07 PC Board Edge Pattern—page 113 .180 1-119738-6 1-119791-6 4.57 AHColTeI OSNp ePcIiNfi cCaotniotancst— Mpoaugne t1in1g4 30 27.39.0606 38.22.3144 37.81.0844 1.24.7057 1-119216-6 — Application Tooling—page 115 .702 1-119163-6 — 17.83 Contact Replacement Tools— 3.000 3.334 3.204 .180 page 115 31 76.20 84.68 81.38 4.57 1-119738-7 — Special Application—page 96 3.100 3.434 3.304 .180 32 1-650122-8 — 78.74 87.22 83.92 4.57 .180 — 2-119791-0 Technical Documents: 34 3.300 3.634 3.504 4.57 (pages 186, 187): 83.82 92.30 88.90 .475 2-119216-0 — 12.06 Product Specifications 3.400 3.734 3.604 .475 35 2-119216-1 — 108-14019, 108-26003 86.36 94.84 91.54 12.06 Application Specification .180 2-119738-2 — 114-26002 36 38.85.0900 39.78.3348 39.47.0048 4.4.5775 Instruction Sheets 408-2933, 12.06 2-119216-2 — 408-2978, 408-2979, 408-9058, 3.600 3.934 3.804 .180 37 2-650122-3 — 408-9067, 408-9091, 408-9186 91.44 99.92 96.62 4.57 .180 2-119738-6 — 3.900 4.234 4.104 4.57 40 99.06 107.54 104.24 .475 2-119216-6 — 12.06 4.200 4.534 4.404 .180 43 2-650122-9 — 106.68 115.16 111.86 4.57 4.300 4.634 4.504 .475 44 3-119216-0 — 109.22 117.70 114.40 12.07 .180 3-119738-6 3-119791-6 4.57 50 4.900 5.234 5.104 .475 3-119216-6 — 124.46 132.94 129.64 12.07 .702 — 3-119726-6 17.83 5.400 5.734 5.604 .180 55 4-119738-1 4-650124-1 137.16 145.54 142.34 4.57 .180 4-119738-6 — 5.900 6.234 6.104 4.57 60 149.86 158.34 155.04 .702 119677-1 — 17.83 Note:Other connector sizes can be made available, consult Tyco Electronics. 103 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .125 x .125 [3.18 x 3.18] Centerline Material and Finish: Housing with High Card Scoops Housing—Black glass-filled polyester, 94V-0 rated 28 Dual Positions Contacts—Phosphor bronze, plated Part Number 1-119853-4 gold .000030 [0.00076] min. thk. over .000050 [0.00127] min. thk. palladium- nickel in contact area, .000100 .420 .364 [0.00254] min. tin-lead on posts, with .125 [10.67] [9.24] entire contact underplated .000050 3.755 [3.18] [0.00127] min. nickel [95.38] Contact Tip Alignment Strip—Clear .515 polyester, type D 3.625±.006 [13.08] Note:Full palladium-nickel plated [92.08±0.15] [0.0.1035//0.0.1087] CaDredp Sthlot [1.0.0420] Min. posts and other platings and plating Contact thicknesses can be made available. See E Below Finish Area .702 Related Product Data: [17.83] Performance Specifications— anPdo Fstin Lisehn gAtrhea [.00.2654] Sq. page 98 Post Accessories—page 112 Accepts PC Board Edge Pattern—page 113 .054 to .071 Contact Tip .125 [1.37 to 1.80] Alignment Strip [3.18] ACTION PIN Contact Mounting PC Boards and .702[17.83] Hole Specifications—page 114 3.375 Post Length [85.72] Application Tooling—page 115 Contact Replacement Tools— page 115 .125 [3.18] Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-6727, 408-9186 .135 [3.43] Detail E Keying Plugs Intercontact (Plastic) On-Contact (Plastic) Part No. 118982-1 Part No. 119802-2 104 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connector Specials, .125 x .125 [3.18 x 3.18] Centerline 27 Dual Positions Tin-Lead Posts .634 [16.10] Long Part No. 645394-1 18 or 36 Dual Positions Tin-Lead Posts .740 [18.80] Long Part No. 119552-2 Tin-Lead Posts .180 [4.57] Long Part No. 119880-1 97 Dual Positions (Two-piece Closed End/Open End with Partial Card Scoops and Card Guides) Contact Tyco Electronics for specific Part Number infor- mation. 105 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline Standard Housing .125 .364 [3.18] .410 [9.24] [10.41] B C ±.006 .415 [±0.15] [10.54] .005/.007 Card Slot .545 [0.13/0.18] Depth .040 Min. [13.84] [1.02] Contact See E Below Finish Area .702 [17.83] Post Length .025 Sq. Accepts AlCigonnmtaecntt TSiptrip and Finish Area [P0o.6s4t] [.20.9336] Min. .054 to .071 on .500[12.07] [1.37 to 1.80] and .702[17.83] PC Boards Post Lengths .250 A [6.35] .125 [3.18] Housing with High Card Scoops .125 [3.18] .420 .364 B [10.67] [9.24] C[±±.00.0165] [1.531.058] .005/.007 Card Slot .645 [0.13/0.18] Depth .040 Min. [16.38] [1.02] Contact See E Below Finish Area .702 [17.83] .025 Post Length Sq. [0.64] Accepts and Finish Area Post .093 Min. .054 to .071 Contact Tip [2.36] [1.37 to 1.80] Alignment Strip PC Boards on .500[12.07] .250 and .702[17.83] [6.35] 3.375 Post Lengths [85.72] .125 [3.18] Keying Plugs Typical Closed End/ .125 Open End Housings [3.18] Intercontact (Plastic) Part No. 118982-1 Connectors can be mounted in pairs using .135 any size combinations. [3.43] On-Contact (Plastic) Example: Detail E Part No. 119802-2 1-30 pos. + 1-60 pos. = 1-90 pos. 106 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline (Continued) Material and Finish: No. of Dimensions Post Closed End/Closed End Closed End/Open End Dual Housing—Black glass-filled polyester, Positions A B C Length Standard High Scoop High Scoop 94V-0 rated 2.125 2.373 2.505 .180 18 1-119822-4 — 3-119840-2 Contacts—Phosphor bronze, plated 53.98 60.27 63.63 4.57 gold .000030 [0.00076] min. thk. over .180 1-119822-8 — — .000050 [0.00127] min. thk. nickel in 4.57 contact area, .000100 [0.00254] min. 22 2.625 3.005 2.875 .500 1-119200-8 — — 66.68 76.33 73.02 12.70 tin-lead on posts, with entire contact underplated .000050 [0.00127] min. .702 1-119202-8 — — 17.83 nickel 3.000 3.380 3.250 .180 Contact Tip Alignment Strip—Clear 25 76.20 85.85 82.55 4.57 1-119822-1 — — polyester, type D 3.250 3.630 3.500 .702 27 1-119202-3 — — 82.55 92.20 88.90 17.83 Note:Full palladium-nickel plated .180 1-119822-4 — — posts and other platings and plating 3.375 3.755 3.625 4.57 28 thicknesses can be made available. 85.72 95.38 92.08 .500 1-119200-4 — — 12.70 .180 1-119822-6 1-678034-1 — Related Product Data: 3.625 4.005 3.875 4.57 30 92.08 101.73 98.24 .500 Performance Specifications— 12.70 — 1-119841-6 — page 98 .180 2-119822-2 1-678034-2 — Accessories—page 112 4.375 4.755 4.625 4.57 PC Board Edge Pattern—page 113 36 111.82 120.78 117.48 .500 — 2-119841-2 — 12.70 ACTION PIN Contact Mounting 4.625 4.873 5.005 .180 Hole Specifications—page 114 38 117.47 123.77 127.13 4.57 2-119822-4 — 3-119840-9 Application Tooling—page 115 .180 2-119822-6 — — 4.875 5.255 5.125 4.57 Contact Replacement Tools— 40 123.83 133.48 130.18 .702 page 115 17.83 2-119200-6 — — Special Application—page 96 6.125 6.505 6.375 .180 50 3-119822-6 — — 155.58 165.23 161.93 4.57 6.250 6.630 6.500 .500 51 3-119200-7 — — Technical Documents: 158.75 168.40 165.10 12.70 (pages 186, 187): 60 7.375 7.755 7.625 .180 4-119822-6 — — 187.33 196.98 193.68 4.57 Product Specifications Note:Other connector sizes can be made available, consult Tyco Electronics. 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-2933, 408-2978, 408-2979, 408-9063, 408-9091, 408-9119, 408-9186 107 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline w/ Make Before Break Contacts Standard Housing .125 .364 [3.18] .410 [9.24] [10.41] B C ±.006 .415 [±0.15] [10.54] .005/.007 Card Slot .545 [0.13/0.18] Depth .040 Min. [13.84] [1.02] Contact See E Below Finish Area .702 [17.83] Post Length .025 Sq. Accepts AlCigonnmtaecntt TSiptrip and Finish Area [P0o.6s4t] [.20.9336] Min. .054 to .071 on .500[12.07] [1.37 to 1.80] and .702[17.83] PC Boards Post Lengths .250 A [6.35] .125 [3.18] Housing with High Card Scoops .125 [3.18] .420 .364 B [10.67] [9.24] .515 C ±.006 [13.08] [±0.15] [.00.0153//.00.0178] CaDredp Sthlot [1.0.0420] Min. [1.66.4358] Contact See E Below Finish Area .702 [17.83] Post Length .025 Sq. and Finish Area [0.64] .093 Accepts Post [2.36] Min. .054 to .071 Contact Tip [1.37 to 1.80] Alignment Strip PC Boards on .500[12.07] .250 [6.35] and .702[17.83] 3.375 Post Lengths [85.72] .125 [3.18] Keying Plugs Typical Closed End/ .125 Open End Housings [3.18] Intercontact (Plastic) Part No. 118982-1 Connectors can be mounted in pairs using .135 any size combinations. [3.43] On-Contact (Plastic) Example: Detail E Part No. 119802-2 1-30 pos. + 1-60 pos. = 1-90 pos. 108 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline w/ Make Before Break Contacts (Continued) Material and Finish: No. of Dimensions Post Closed End/Closed End Closed End/Open End Dual Housing—Black glass-filled polyester, Positions A B C Length Standard High Scoop 94V-0 rated 2.125 2.505 2.373 .180 18 1-1571235-1 — Contacts—Phosphor bronze, plated 53.98 63.63 60.27 4.57 gold .000030 [0.00076] min. thk. over 2.875 3.123 3.058 .180 24 — 650059-2 .000050 [0.00127] min. thk. nickel in 76.20 79.25 77.67 4.57 contact area, .000100 [0.00254] min. Note:Other connector sizes can be made available, consult Tyco Electronics. tin-lead on posts, with entire contact underplated .000050 [0.00127] min. nickel Contact Tip Alignment Strip—Clear polyester, type D Note:Full palladium-nickel plated posts and other platings and plating thicknesses can be made available. Related Product Data: Performance Specifications— page 98 Accessories—page 112 PC Board Edge Pattern—page 113 ACTION PIN Contact Mounting Hole Specifications—page 114 Application Tooling—page 115 Contact Replacement Tools— page 115 Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-2933, 408-2978, 408-2979, 408-9063, 408-9091, 408-9119, 408-9186 109 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .156 x .200 [3.96 x 5.08] Centerline Material and Finish: Standard Housing Housing—Black glass-filled polyester, 94V-0 rated .156 .364 [3.96] .360 [9.24] Contacts—Phosphor bronze, plated [9.14] gold .000030 [0.00076] min. thk. over B .000050 [0.00127] min. thk. nickel in contact area, .000100 [0.00254] min. .415 tin-lead on posts, with entire contact C ±.006 [10.54] [±0.15] underplated .000050 [0.00127] min. .005/.007 Card Slot .545 nickel [0.13/0.18] Depth .040 Min. [13.84] [1.02] Contact Tip Alignment Strip—Clear Contact See E Below Finish Area polyester, type D Note:Full palladium-nickel plated Post Length posts and other platings and plating and .025 thicknesses can be made available. Finish Area [0.64] Sq. Post .093 Min. Accepts [2.36] Related Product Data: .054 to .071 [1.37 to 1.80] .200 Performance Specifications— PC Boards Contact Tip [5.08] A Alignment Strip page 98 on .475[12.07] Accessories—page 112 and .702[17.83] Post Lengths PC Board Edge Pattern—page 113 .156 [3.96] ACTION PIN Contact Mounting Hole Specifications—page 114 Application Tooling—page 115 Contact Replacement Tools— page 115 Keying Plugs Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Intercontact (Plastic) On-Contact (Plastic) Application Specification Part No. 118982-1 Part No. 119802-2 .135 [3.43] 114-26002 Detail E Instruction Sheets 408-6726, 408-9186 No. of Dimensions Post Closed End/Closed End Dual Positions A B C Length Standard .180 1-119790-1 4.57 2.184 2.626 2.495 .475 15 1-119254-1 55.47 66.70 63.39 12.07 .702 1-119256-1 17.83 2.652 3.094 2.964 .475 18 1-119254-4 67.36 78.59 75.29 12.07 .180 1-119790-8 4.57 22 3.276 3.718 3.588 .475 1-119254-8 83.21 94.44 91.13 12.07 .702 1-119256-8 17.83 .180 1-119790-4 4.57 4.212 4.654 4.524 .475 28 1-119254-4 106.98 118.21 114.91 12.07 .702 1-119256-4 17.83 .180 2-119790-9 4.57 43 6.552 6.994 6.864 .475 2-119254-9 166.42 177.65 174.35 12.07 .702 2-119256-9 17.83 Note:Other connector sizes can be made available, consult Tyco Electronics. 110 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .156 x .200 [3.96 x 5.08] Centerline w/Make Before Break Contacts Material and Finish: Card Scoop Housing Housing—Black glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .156 .364 .228 gold flash over .000030 [0.00076] min. [3.96] [9.25] [5.78] thk. over .000050 [0.00127] min. thk. B nickel in contact area, .000100 .045 Contact Area [0.00254] min. tin-lead on posts, with C [1.14] entire contact underplated .000050 [0.00127] min. nickel Contact Tip Alignment Strip—Clear .116 Contact Area [2.95] polyester, type D Note:Full palladium-nickel plated posts and other platings and plating .005/.007 .200 thicknesses can be made available. .093 Min. [0.13/0.18] [5.08] Accepts [2.36] .054 to .071 Related Product Data: [1.37 to 1.80] PC Boards Performance Specifications— page 98 Accessories—page 112 A PC Board Edge Pattern—page 113 ACTION PIN Contact Mounting .156 Hole Specifications—page 114 [3.96] Application Tooling—page 115 Contact Replacement Tools— page 115 Special Application—page 96 Keying Plugs Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-6726, Intercontact (Plastic) On-Contact (Plastic) .135 408-9186 Part No. 118982-1 Part No. 119802-2 [3.43] Detail E No. of Dimensions Post Closed End/Closed End Dual Positions A B C Length Scoop 2.652 3.094 2.964 .180 18 678035-1 67.36 78.59 75.29 4.57 Note:Other connector sizes can be made available, consult Tyco Electronics. 111 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) Accessories for AMP PACE Connectors Connector Card Guide Material: Black glass-filled polyester Hole for #4 Self-Tapping Screw Related Product Data: (mandatory) .050[12.7] Deep .370 Mates with all standard housings (will [9.4] not mate with some special housings) L Technical Documents: (pages 186, 187): .410 [10.41] .220 Instruction Sheet 408-9091 [5.59] BDimension from .152 Dia. AMPPACEConnector [3.96] Tables Plus .310 [7.87] (2 Holes) L1 Part Numbers 2.500 63.50 1-117169-3 6.000 152.40 1-117169-3 1Other lengths up to 6.0[152.4] can be made available. Consult Tyco El e c t r o n i c s for details. Ground Module Rating: Accepts .054 to.071 20 amperes per contact—Copper or [1.37 to 1.80] PC Board aluminum bus .420 Material and Finish: [10.67] Housing—Black glass-reinforced thermoplastic .455 Contact—CA 195, 3/4 hard, plated [11.56] .000050 [0.00127] gold in contact area (front face only); .000100 [0.00254] tin- lead on post, with entire contact under- plated .000050 [0.00127] nickel .700 [17.78] .060 [1.52] Contact Related Product Data: Area Mates with all standard housings (will .250 not mate with some special housings) [6.35] .300 Technical Documents: [7.62] (pages 186, 187): Part No. 119341-1 Instruction Sheet 408-2978 Seating Tool 59881-1 112 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) PC Board Layout for AMP PACE Connectors Recommended Gold PC Board Edge Pattern Fingers .040+.020 -.010 [1.016+.508] -.254 .430 [10.92] .275 30° [6.99] .050 B .054-.071 [1.27] Max. Chamfer .052±.002 C[±±.00.0153] [1.37-1.80] [1.32±0.05] Key Slot A1 1A Max. = Minimum connector card slot -.001 [-0.03]. A Min. = Minimum connector card slot -.011 [-0.28]. Note:Finger pattern to be centered on daughter card. Each finger can deviate .003 [0.08] from true position. AMP PACE Connector Dimensions Centerline Spacing B C .100 x .100 .100 .070 2.54 x 2.54 2.54 1.78 .100 x .200 .100 .070 2.54 x 5.08 2.54 1.78 .125 x .125 .125 .080 3.18 x 3.18 3.18 2.03 .125 x .250 .125 .080 3.18 x 6.35 3.18 2.03 .156 x .200 .156 .080 3.96 x 5.08 3.96 2.03 113 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide break-through and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PCBoard Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PINcontacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- nector being used must be (cid:192) Annular Ring (See Note) followed. ` Drilled Hole ´ Copper Thickness ˆ Tin-Lead Thickness ˜ Plated Through-Hole Mounting Hole Specifications Connector ACTION PIN Contact Drilled Hole Plating Thicknesses Plated Radial Hole Distortion Centerline NPoo. soift iDonusal TMhiactkenrieasls Diameter` Copper´* Tin-Leadˆ ThDrioaumgeht-eHr˜ole Average Maximum .125 x .125 3.18 x 3.18 28, 97 .025 .0453±.001 .001-.003 .0003 .037-.043 Not Not .156 x .200 15-43 0.64 1.151±0.03 0.03-0.08 0M.0in0.8 0.94-1.09 Specified Specified 3.96 x 5.08 .0003 .125 x .125 .025 .0465±.001 .001-.003 .037-.043 Not Not 27 0.008 3.18 x 3.18 0.64 1.181±0.03 0.03-0.08 0.94-1.09 Specified Specified Min. .100 x .100 15-60 2.54 x 2.54 .100 x .200 2.54 x 5.08 15-60 .025 .0453±.001 .001-.003 .0003 .037-.043 .0015 .002 0.008 .125 x .125 18, 36 0.64 1.151±0.03 0.03-0.08 Min. 0.94-1.09 0.038 0.05 3.18 x 3.18 .125 x .250 18-60 3.18 x 6.35 *Maximum hardness of copper layer is 150 Knoop. Note:Recommended annular ring diameter is hole diameter plus .020[0.51]. 114 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) Application Tooling for AMP PACE Connectors Modular Seating Tools Available from Tyco Electronicsis a complete series of AMP PACE Modular Seating Tools for installing AMP PACE Connectors on printed circuit boards and panels. These tools are modular in design in that housing tool holders may .100 x .100 [2.54 x 2.54] .100 x .200 [2.54 x 5.08], .156 x .200 [3.96 x 5.08] be added or subtracted to Centerline Spacing .125 x .125 [3.18 x 3.18], Centerline Spacing accommodate several dif- .125 x .250 [3.18 x 6.35], For Connectors without Scoops ferent connector sizes. In addition, all tool parts are No. of Centerline individually replaceable Dual .100 x .100 .100 x .200 .125 x .250 .156 x .200 Positions [2.54 x 2.54] [2.54 x 5.08] [3.18 x 6.35] [3.96 x 5.08] should the tool become 15 1-58200-1 1-58140-1 — 1-58143-1 damaged. 18 — 1-58140-4 1-58142-4 — Modular seating tools are 20 1-58200-6 1-58140-6 — — supplied in two basic 22 — 1-58140-8 1-58142-8 1-58143-8 designs: One which covers 25 1-58200-1 1-58140-1 1-58142-1 — all connector centerlines 28 1-58200-4 1-58140-4 1-58142-4 1-58143-4 except .100 x .100 [2.54 x 30 1-58200-6 1-58140-6 1-58142-6 — 2.54] and one for the .100 x 31 1-58200-7 — — — .100 [2.54 x 2.54] centerline 32 — 1-58140-8 — — 34 — 2-58140-0 — — connectors. 35 2-58200-1 2-58140-1 — — All seating tools have a 36 — 2-58140-2 2-58142-2 — common shut height of 37 — 2-58140-3 — — 1.5 inches [38]. This 40 2-58200-6 2-58140-6 2-58142-6 — allows AMP PACE and other 43 — 2-58140-9 — 2-58143-9 ACTION PIN products to be 44 — 3-58140-0 — — seated at the same time on 48 3-58200-4 — — — AMPseating machines. See 50 3-58200-6 3-58140-6 3-58142-6 — page 149 for a description 51 3-58200-7 — 3-58142-7 — of the AMP seating 54 4-58200-0 — — — machines. 55 4-58200-1 4-58140-1 — — 56 — — 4-58142-2 — 60 4-58200-6 4-58140-6 4-58142-6 — For Connectors with Scoops No. of Centerline Dual .100 x .200 .125 x .125 .125 x .250 Positions [2.54 x 5.08] [3.18 x 3.18] [3.18 x 6.35] 15 1-58150-1 — — 18 — — 1-58184-4 22 1-58150-8 — — 28 — 1-58218-4 — 30 1-58150-6 — — 38 — — 2-58184-4 50 3-58150-6 — 3-58184-6 55 4-58150-1 — — Contact Replacement Housing Style Tools Centerline Standard Full Card Scoop Replacement tools listed in .100 x .100 266220-3 — 2.54 x 2.54 the chart at the right are .100 x .200 used to install replacement 2.54 x 5.08 266220-1 58210-1 contacts in AMP PACE con- .125 x .125 — 58210-4 Note:Tooling availability is nector housings. Replace- 3.18 x 3.18 dependent upon part number ment Tool 1-265871-7is .125 x .250 266220-2 58210-2 activity. Consult Tyco 3.18 x 6.35 used to remove all .025 Electronics for further [0.64] square posts from .31.5966 xx 5.2.0080 266220-2 — information. PC boards. 115 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) TELEDENSITY Connectors Product Facts nHigh density - .0625 [1.586] contact centerlines nCompliant ACTION PIN contacts press-fit into plated-through holes for solderless application nIndividually replaceable contacts nAccommodates up to three levels of daughter card pads for sequencing n.125 [3.18] square grid post arrangement Performance Specifications Current Rating*: 3 amperes max. Mating Force (Contact Pair): The high performance AMP contacts are plated with 30 pads for sequencing, while 1 lb. [4.4 N] max. TELEDENSITY connector is microinches of gold in the a biasing wedge maintains a high density, card edge, mating area and tin-lead on proper pad alignment dur- Durability (Mating Cycles): telecommunications con- the posts. A plastic locating ing card extraction. Posts 100 min. nector. It features compliant strip keeps posts positioned are arranged in a .125 Termination Resistance: ACTION PIN contacts for correctly for board insertion. [3.18] square grid to ease 12 milliohms max. solderless application to circuit routing. For high-density needs, Dielectric Rating: multi-layer printed circuit TELEDENSITY connectors 1200 VAC (rms) boards with plated-through offer a .0625 [1.586] daugh- Insulation Resistance: or bare copper holes. ter card contact centerline 5000 megohms max. These connectors accept spacing in 39-, 71-, or 99- Operating Temperature: .054 to .072 [1.37 to 1.83] dual positions. The connec- –55°C to +85°C thick daughter cards. To tor’s .330 [8.38] slot depth satisfy the broadest range accommodates up to three of application needs, the levels of daughter card *Consult Tyco Electronics when paralleling contacts for power applications. 116 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) TELEDENSITY Connectors, .0625 [1.586] Centerline Material and Finish: Housing—Black polyester Contacts—Copper alloy 725, plated .000030 [0.00076] gold in contact area, .000030 [0.00076] solder plate on post, with entire contact underplated .000100 [0.00254] nickel Coil Spring—Stainless steel Contact Tip Alignment Strip—Clear polyester Related Product Data: Performance Specifications— page 116 ACTION PIN Contact Mounting Hole Specifications—page 118 Technical Document—pages 186, 187 Product Specification— 108-26003 Instruction Sheet— 408 6866 Number of Dimensions Connector Seating Dual Part Tool Positions A B C D Numbers Numbers** .634 3.168 2.588-2.600 16.10 2.375 650148-1 39 58084-1 80.47 65.74-66.04 .350 60.33 8.89 650281-1* 5.168 4.588-4.600 .634 4.375 71 131.27 116.54-116.84 16.10 111.13 650149-1 58084-3 6.918 6.338-6.350 .634 6.125 99 175.72 160.99-161.29 16.10 155.58 650150-1 58084-2 * Contacts in this connector are underplated .000150 [0.00381] nickel. ** See page 149 for a description of AMP seating machines. Recommended PC Board Layout For mounting hole specifications, see page 123 (Shown from post side) Note:ACTION PIN posts require .093 [2.36] min. thick PC board. 117 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) TELEDENSITY Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide breakthrough and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PCBoard Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PINcontacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- (cid:192) Annular Ring (See Note) nector being used must be followed. ` Drilled Hole ´ Copper Thickness ˆ Tin-Lead Thickness ˜ Plated Through-Hole Mounting Hole Specifications MatAerCCiaTo lI On Tt hNa i c cPt kINness DDri a ilm lede t He r o`le Co p Pp lae tr i´ng* ThicTki nn e- sL se ea sd ˆ Pl a Dt i e a d Hm - oT e lh t e e r o r ˜u g h ARv ae dr a iag le Hole DMisa tox i rm tiou nm .0 2 5 .0 4 5 3 ± . 0 0 1 .0 0 1 - . 0 0 3 .0003 Mi n . .0 3 7 - . 0 4 3 .0 0 1 5 .0 0 2 0. 6 4 1. 1 5 1 ± 0 . 0 3 0. 0 3 - 0 . 0 8 0. 0 0 8 0. 9 4 - 1 . 0 9 0. 0 3 8 0. 0 5 *Maximum hardness of copper layer is 150 Knoop No t e : Recommended annular ring diameter is hole diameter plus .0 2 0 [0 . 5 1 ] 118 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors Performance Specifications Electrical Characteristics Contact Resistance: 8 milliohms (max.) Insulation Resistance: 2,000 megohms (min.) Continuous Current Rating*: 3 amperes Physical Characteristics Card Insertion Force: 16 oz [4.45 N] (max.) per contact pair Card Extraction Force: 1 oz [0.28 N] (min.) per contact pair Retention (in PC Board): 7 lb [31.1 N] (min.) Operating Temperature: –65°C to +125°C AMP ECONOMATE Contacts from Tyco Important: Connectors provide a Electronics feature the Application tooling is reliable and economical proven and reliable absolutely necessary for method for interconnecting ACTION PIN contact installing contacts and backplane panels, using design.These press-fit con- housings onto PC boards. either two-sided or multi- tacts employ two spring See page 126 for applica- layer PC boards. members that compress to tion tooling. exert force against the Connector housings are fur- plated through-holes for a nished unloaded and are gas-tight connection. available for post centerline Gold plating of contacts spacings of: .100 x .200 promotes the electrical [2.54 x 5.08] and .156 x .200 integrity of the connection. [3.96 x 5.08]. The housings are simply positioned onto Feed-through posts are also the contacts, after the con- available for accepting tacts have been inserted wrap-type terminations. into the PC board and the These posts also feature the carrier strip removed. ACTION PIN contact design and are supplied in strip form and stored on reels for insertion into PC boards. *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 119 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) .100 x .200 [2.54 x 5.08] Centerline Spacing B (Card Slot Material and Finish: A Length) NDou. aolf Dimensions HoPuasritng Housing—Black glass-filled nylon [.2 1 . 05 04 ] Positions 2.7A34 2.6B04 Numbers Contacts—Copper alloy 725, plated as 25 82.14 78.84 1-117798-4 follows: 3.234 3.104 30 1-117798-3 Plating A—Selectively plated .000030 Accepts 82.14 78.84 [0.00076] min. gold in contact area, .054-.071 3.734 3.604 35 1-117798-6 .000001 [0.00003] min. gold on remain- [1.37-1.80] 94.84 91.54 der of contact, with entire contact under- PC Boards 36 3.834 3.704 1-117798-7 97.38 94.08 plated .000050 [0.00127] min. nickel Plating B—Duplex plated .000030 40 4.234 4.104 1-117798-8 107.54 104.24 [0.00076] min. gold in contact area, 5.234 5.104 .000100 [0.00254] min. tin-lead on 50 132.94 129.64 1-117798-1 posts, with entire contact underplated 6.234 6.104 .000050 [0.00127] min. nickel 60 158.34 155.04 1-117798-2 Plating C—Selectively plated .000100 Note:Other connector sizes can be made available, [0.00254] min. gold in contact area, consult Tyco Electronics. .000001 [0.00003] min. gold on remain- der of contact, except .000050 [0.00127] min. gold for .200 [5.08] from tip of post, with entire contact underplated .000050 [0.00127] min. nickel .415 [10.54] .545 .181 [13.84] Related Product Data: [4.60] Performance Specifications— page 119 Contact Card Guides—page 122 Area L .093-.125 ACTION PIN Contact Mounting [2.36-3.18] Hole Specifications—page 125 Application Tooling—page 126 .200 [5.08] .025 Technical Documents: Sq. [0.64] (pages 186, 187): Product Specification 108-26002 .100 [2.54] Dimension Contact Part Numbers* Keying Plugs L Plating A Plating B Plating C .475 2-117795-4 4-117795-0 — Make-Before-Break Contacts 12.07 .702 1-117795-3 2-117795-6 4-117795-8 17.83 *Contacts are strip form, 35,000 per reel. Intercontact (Plastic) Part No. 118982-1 Dimension Make Before Break Contact Part Numbers* L Plating A Plating B .475 — 4-118951-8 12.07 [.10.4002] Ref. 1.77.0823 1-118951-4 — Gold in Contact Area .025 Sq. [0.64] On-Contact (Plastic) Part No. 119802-2 .100 [2.54] 120 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) 3.588 .156 x .200 [3.96 x 5.08] [91.14] (Card Slot Centerline Spacing Length) 3.718 Material and Finish: [94.44] Housing—Black glass-filled nylon [.3 1 . 59 66 ] Contacts—Copper alloy 725, plated as follows: Plating A—Selectively plated .000030 Accepts [0.00076] min. gold in contact area, .054-.071 .702 .000001 [0.00003] min. gold on remain- [1.37-1.80] [17.83] PC Boards der of contact, with entire contact under- .150 Ref. plated .000050 [0.00127] min. nickel [3.01] Plating B—Duplex plated .000030 Gold in Contact [0.00076] min. gold in contact area, Area .025 .000100 [0.00254] min. tin-lead on 22 Dual Position Housing [0.64] Sq. posts, with entire contact underplated Part No. 117296-4 .000050 [0.00127] min. nickel .150 [3.06] Related Product Data: Make-Before-Break Contacts Performance Specifications— page 119 Card Guides—page 122 ACTION PIN Contact Mounting Hole Specifications—page 125 Application Tooling—page 126 Technical Documents: (pages 186, 187): Product Specification .415 108-26002 .181 [10.54].545 [4.60] [13.84] Keying Plug Contact Area L .093-.125 [2.36-3.18] .200 [5.08] .025 Sq. [0.64] Intercontact (Plastic) Note:Other connector sizes can be made available, Part No. 118982-1 consult Tyco Electronics. .156 [3.96] Make Before Break Contacts Dimension Part L Plating Numbers* .475 B 1-118778-2 12.07 .702 A 118778-6 17.83 Dimension Contact L Part Numbers* .475 117285-7 12.07 .702 117285-8 17.83 *Contacts are strip form, 15,000 per reel. 121 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) Card Guides for ECONOMATE Connectors Material:Black glass-filled nylon Related Product Data: Mates with all .100 x .200 [2.54 x 5.08] and .156 x .200 [3.96 x 5.08] centerline housings Technical Documents: (pages 186, 187): Instruction Sheet 408-9091 Hole for No. 4 Screw L [101.4.453] deep .220 [5.59] .410 [10.41] .152 Dia. [3.86] (2 Plcs.) A1 Recommended Mounting Dimensions Dimension Card Guide L* Part Numbers 2.500 1-117169-3 63.50 6.000 1-117169-3 152.40 *Other lengths can be made avail- able in .500 [12.70] increments from 1.500 [38.10] to 6.500 [165.10]. Consult Tyco Electronics for details. Housing Dimension Centerline No. of Dual A1 Spacing Positions 3.544 30 90.02 4.044 35 102.72 4.144 36 .100 x .200 105.26 2.54 x 5.08 4.544 40 115.42 5.544 50 140.82 6.544 60 166.22 .156 x .200 4.028 22 3.96 x 5.08 102.31 Note: A1dimension = Adimension of ECONOMATE housing plus .310 [7.87]. 122 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Center Carrier Feed-Thru Posts* .100 [2.54] Centerline, Di m e n s i o n s Part Numbers Wrap Type 1) .000001 [0.00003] min. gold flash over .000050 [0.0013] min. Material: A B C nickel plate 2) .000050 [0.0013] min. Copper Alloy 725 gold plate over Finish– Gold plate per MIL-G-45204 .000050 [0.0013] min. over nickel plate per QQ-N-290 (see table nickel plate for thicknesses) .83 . 10 88 1.7 6 . 8 4 7 5 12.5 0 . 05 53 — Recommended Hole Size: .5 7 8 .4 6 0 1. 0 3 8 Non-Plated-thru Hole- .0453±.001 14 . 6 8 11 . 6 8 26 . 3 7 11 8 2 4 3 - 8 [1.15±0.03], 1.15 mm drill .5 7 8 .5 5 0 1. 1 2 8 Plated-thru Hole-.039 ±.004[0.99 ± 0.1], 14 . 6 8 13 . 9 7 28 . 6 5 1- 1 1 8 2 4 3 - 1 .003 0.08 1.15 mm drill 9.3 . 68 50 2.0 8 . 2 9 3 0 31.0 2 . 05 63 — .100 [2.54] Centerline, TERMI-POINT Clip Part Number 119136-2 Material: Copper Alloy 725 Finish– 1) Gold plate per MIL-G-45204, .000030 [0.00076] min. thk. over nickel plate per QQ-N-290, .000050 [0.0013] min. thk. 2) Gold flash per MIL-G-45204, .000001 [0.00003] min. thk. over nickel plate per QQ-N-290, .000050 [0.0013] min. thk. Recommended Hole Size: Non Plated-thru Hole- .0453±.001 [1.15±0.03], 1.15 mm drill Plated-thru Hole- .039±.004 [0.99± 0.1 ], .003 0.08 1.15 mm drill .125 [3.18] Centerline, Wrap Type Material: Copper Alloy 725 Dimensions Part Numbers Finish– Gold plate per MIL-G-45204 or .000100 [0.0025] min. .000030 [0.00076] solder plate over nickel plate per A B tin plate over gold plate over QQ-N-290 (see table for thicknesses) .000050 [0.0013] min. .000050 [0.0013] nickel plate nickel plate Recommended Hole Size: 1.77.0638 1.35.4982 117311-7 1-117311-0 Non Plated-thru Hole- .0453±.001 *Use AMP Cut and Transfer Machine for center carrier post insertion. Consult [1.15±0.03], 1.15 mm drill Tyco Electronics. Plated-Thru Hole-.039±..000043[0.99±00..018 ], 1.15 mm drill 123 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) Feed-Through Posts .100 [2.54] Centerline Spacing Material and Finish: Copper alloy 725, plated as follows: Plating A—Selectively plated .000030 [0.00076] min. gold in Area (1), .000001 [0.00003] min. gold in Area (2), with entire post underplated .000050 [0.00127] min. nickel (1) .318 Plating B—.000030 [0.00076] min. [8.08] gold over .000100 [0.00254] min. nickel .045 on entire post [1.14] Plating C—.000050 [0.00127] min. gold over .000100 [0.00254] min. nickel on entire post Plating D—.000100 [0.00254] min. .030 tin-lead over .000050 [0.00127] min. [0.76] nickel on entire post (2) A Pre-Notch .025 .100 [0.64] .025 [2.54] [0.64] Dimension Feed-Through Post Part Numbers* A Plating A Plating B Plating C Plating D .687 1-117249-7 1-117249-2 1-117249-2 6-117249-5 17.45 13-117249-11 .500 3-117249-2 — — 5-117249-6 12.70 *Posts in strip form, 50,000 per reel. 1Pre-notched to break with 120° bend. .150 [3.81] Centerline Spacing Material and Finish: Copper alloy 725, selectively plated .000030 [0.00076] min. gold in Area (1), .000001 [0.00003] min. gold in Area (2), with entire post underplated .000050 [0.00127] min. nickel (1) .318 [8.08] .045 [1.14] .030 [0.76] (2) .687 [17.45] .025 .150 [0.64] .025 [3.81] [0.64] 50,000 per reel Part No. 117269-5 124 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide break-through and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PCBoard Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PINcontacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- (cid:192) Annular Ring (See Note) nector being used must be followed. ` Drilled Hole ´ Copper Thickness ˆ Tin-Lead Thickness ˜ Plated Through-Hole Mounting Hole Specifications Connector ACTION PIN Contact Drilled Hole Plating Thicknesses Plated Radial Hole Distortion Centerline NPoo. soift iDonusal TMhiactkenrieasls Diameter` Copper´* Tin-Leadˆ ThDrioaumgeht-eHr˜ole Average Maximum .100 x .200 30, 35, 36, 2.54 x 5.08 40, 50, 60 .025 .0453±.001 .001-.003 .0003 .037-.043 Not Not .156 x .200 22 0.64 1.151±0.03 0.03-0.08 0M.0in0.8 0.94-1.09 Specified Specified 3.96 x 5.08 *Maximum hardness of copper layer is 150 Knoop. Note:Recommended annular ring diameter is hole diameter plus .020[0.51]. 125 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) Application Tooling for ECONOMATE Connectors Available from Tyco housings and contacts from housings are presented on Electronics is a complete the printed circuit boards. the respective product series of ACTION PIN All tools are available in kits, specification pages. For Assembly Tooling Kits for or may be purchased specific dash numbers and ECONOMATE connector individually. complete information on housings and feed-through the tooling, contact In many instances, part posts. Assembly Kit tools Tyco Electronics. number series are listed in provide the means for the charts. Specific dash installing housings and con- numbers and detailed infor- tacts onto printed circuit mation on the contacts and boards, as well as removing For ECONOMATE Connectors ACTION PIN Contacts ECONOMATE Housings ACTION PIN Assembly Centerline Pin Part No. of Dual Part Tool Numbers Length Numbers Positions Numbers Applicator 265902-n Carrier Removal Tool 265924-n .125 x .125 .702 117793-n 15-60 117796-n Housing Assembly Tool 58292-n 3.18 x 3.18 17.83 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-2 Applicator 265904-n Carrier Removal Tool 265924-n .100 x .200 .702 117795-n 15-60 117798-n Housing Assembly Tool 265879-n 2.54 x 5.08 17.83 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-2 Applicator 265905-n Carrier Removal Tool 265924-n .156 x .200 .702 117285-n 15-50 117296-n Housing Assembly Tool 265881-n 3.96 x 5.08 17.83 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-2 Applicator 265906-n Carrier Removal Tool 265924-n .156 x .200 .475 117285-n 15-50 117296-n Housing Assembly Tool 265881-n 3.96 x 5.08 12.07 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-3 Applicator 266129-n Carrier Removal Tool 265924-n .100 x .200 .475 117795-n 15-60 117798-n Housing Assembly Tool 265879-n 2.54 x 5.08 12.07 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-3 Applicator 265937-n Carrier Removal Tool 265924-n .100 .340 117880-n 20-60 117879-n Housing Assembly Tool 265962-n 2.54 8.64 Housing Removal Tool 265868-2 Pin Replacement Tool 1-265871-1 For Feed-Through Posts ACTION PIN Contacts ACTION PIN Assembly Centerline Pin No. of Part Tool Numbers Length Positions Numbers Applicator 265910-n .100 .500-.687 8-60 117249-n Carrier Removal Tool 265924-n 2.54 12.70-17.45 Pin Replacement Tool 265871-7 Applicator 265911-n .125 .687 8-60 117272-n Carrier Removal Tool 265924-n 3.18 17.45 Pin Replacement Tool 265871-7 Applicator 265912-n .150 .687 8-50 117269-n Carrier Removal Tool 265924-n 3.81 17.45 Pin Replacement Tool 265871-7 Applicator 265931-n .150 .365-.475 8-50 117269-n Carrier Removal Tool 265924-n 3.81 9.27-12.07 Pin Replacement Tool 265871-7 126 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) High Density Press-Fit Card Edge Product Facts nHigh density .050" [1.27] center spacing. nStaggered contacts for low insertion force. nDesigned for multi-layer .093" [2.36] daughter cards. nHigh temperature SMT sol- der reflow temperatures of 260° for 30 seconds. nUnique pin geometry allows for even distribution of forces reducing axial pin rotation and preserving per- pendicularity to the PCB board. nEdge and side coining pro- vides a uniform pin radius ensuring maximum contact without "skiving" the plated hole. nFull complement of applica- tion tooling available. High Density (.050" [1.27] Electrical Characteristics: n Recognized under the center spacing) Press-Fit Operating Voltage–600VDC (sea Component Program of connectors from Tyco level) Underwriters Electronics are designed for Laboratories Inc., high density backplane or Current Rating –1.5 Amperes File No. E60980 mid-plane applications. Initial Contact Resistance – Compliant pin connectors 30 milliohms n Certified by Canadian Standards from Tyco Electronics meet Environmental Association, ® or exceed requirements of Characteristics: File No. LR 49571 current industry standards, Operating Temperature – including Bellcore specifica- -55˚C to +125˚C tions, which address critical Temperature Cycling – performance issues such as MIL-STD-202 method 107 hole retention, hole deforma- tion and environmental per- Vibration– fo r m a n c e . MIL-STD-202, method 204 127 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) .050 [1.27] Centerline For .093 [2.36] Thick Daughter Cards Material and Finish: Insulation Resistance—1000 megohms minimum Contact Retention into PCB—2 lbs. min. Insertion Force—10 oz. max. Mating Force—2 oz. per contact Housing—High Temp. Glass filled thermoplastic, UL rating 94V-0 Color—Black Spring Contact—BeCu Contact Plating—Palladium Nickel +.005 .066 -.010 +.127 X [1.68 -.254] .610 [15.49] .461 .421 [11.71] [10.69] .016 [.41] .148 [3.76] X .138 [3.51] Section X-X “A”Spaces • .050[1.27] = B D C .132 (Card Slot) [3.35] .400 [10.15] .332 [8.43] E Note:Dimension E is Connector Mounting PC Hole Pattern. 128 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) Ordering Information No. of Dual Dimensions TYCO Acquired Readout Position A B C D E F Part Number Part Number 0.950 1.040 1.230 1.100 1.010 20 19 [24.13] [26.42] [31.24] [27.94] [25.65] 147668-2 C9D020PF60048 1.450 1.540 1.730 1.600 1.510 30 29 [36.83] [39.12] [43.94] [40.64] [38.35] 147668-3 C9D030PF60048 1.950 2.040 2.230 2.100 2.010 40 39 [49.53] [51.82] [56.64] [53.34] [51.05] 147668-4 C9D040PF60048 2.450 2.540 2.730 2.600 2.510 50 49 [62.23] [64.52] [69.34] [66.04] [63.75] 147668-5 C9D050PF60048 2.950 3.040 3.230 3.100 3.010 60 59 [74.93] [77.22] [82.04] [78.74] [76.45] 147668-6 C9D060PF60048 E ø .024±.002(.61±.05) ø .096(2.44) .166 [4.22] .066 [1.68] .096[2.44] .075 [1.90] “A”Spaces at .050[1.27] = B Connector Mounting PC Hole Pattern F .093 Thick PC Board [2.36] .030 R .047Typ. “A”Spaces • .050[1.27] = B [.76] [1.19] Y .320 Min. [8.13] .585 [14.86] Y .150 45° x .025[.64] [3.81] All Around .035[.89] Typ. Section Y-Y Daughter Board .125 Configuration [3.17] 129 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) .100 x .100 [2.54 x 2.54] Centerline Press Fit, with Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 Accepts .054 to .071Thk. PC Board [3.37 to 1.80] nCertified by Canadian . 1 2 0±. 0 0 3 Standards [3.05±.25] Association, Point of Card Slot .300[7.62] .350[8.89] File No. LR49571 Contact Depth .415[10.54] Physical Properties: Insulation Resistance— 5000 megohms minimum Contact Retention Into PCB— J 5lbs. min. [356 N] Insertion Force—10 oz. [44.5 N] max. measured with a .0700 ± .0001 .100 [1.80±.00254] THK polished blade per [2.54] MIL-C-21097C Withdrawal Force—1 oz. min. [4.54 N] measured with a .0540 ± .0001 A [3.37±.000254] THK polished test blade per MIL-C-21097C after sizing 3 times B with a .0700 ± .0001 [1.80±.00254] THK blade C Insulator Body—High Temp. Glass filled thermoplastic, UL rating 94V-O .020 Color—Black .365 [.51] Contact Gap Spring Contact—Phosphor Bronze [9.27] Ref. alloy Contact Plating—.000050 [0.00127] .100 nickel underplate with .000030 [2.54] [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: .550 [13.97] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance— J 10 milliohms Environmental Properties: Operating Temperature— [2.1.5040] .[0.6245] Sq. Typ. -55˚C to +125˚C C Temperature Cycling— MIL-STD-202 method 107 Vibration—MIL-STD-202, method 204 Dim C .040±.003 [1.02±.08] Dia. Application Tooling: Insertion Tool—page 150 Related Product Data: .100 [2.54] Daughter Card Edge Pattern— .100 page 57 [2.54] 130 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Press-Fit Board-To-Board) Ordering Information .100 [2.54] Centerline/.100 [2.54] Row-To-Row with Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .180 [4.57] (Dim. “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 C1 D 1 8 P F 2 9 0 1 3 C1 D 1 8 P F 2 9 1 3 3 C1 D 1 8 P F 2 9 0 4 3 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 C1 D 2 0 P F 2 9 0 1 3 C1 D 2 0 P F 2 9 1 3 3 C1 D 2 0 P F 2 9 0 4 3 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 C1 D 2 2 P F 2 9 0 1 3 C1 D 2 2 P F 2 9 1 3 3 C1 D 2 2 P F 2 9 0 4 3 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 C1 D 2 5 P F 2 9 0 1 3 C1 D 2 5 P F 2 9 1 3 3 C1 D 2 5 P F 2 9 0 4 3 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 C1 D 2 8 P F 2 9 0 1 3 C1 D 2 8 P F 2 9 1 3 3 C1 D 2 8 P F 2 9 0 4 3 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 C1 D 3 0 P F 2 9 0 1 3 C1 D 3 0 P F 2 9 1 3 3 C1 D 3 0 P F 2 9 0 4 3 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 C1 D 3 5 P F 2 9 0 1 3 C1 D 3 5 P F 2 9 1 3 3 C1 D 3 5 P F 2 9 0 4 3 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 C1 D 3 6 P F 2 9 0 1 3 C1 D 3 6 P F 2 9 1 3 3 C1 D 3 6 P F 2 9 0 4 3 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 C1 D 4 0 P F 2 9 0 1 3 C1 D 4 0 P F 2 9 1 3 3 C1 D 4 0 P F 2 9 0 4 3 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 C1 D 4 3 P F 2 9 0 1 3 C1 D 4 3 P F 2 9 1 3 3 C1 D 4 3 P F 2 9 0 4 3 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 C1 D 4 5 P F 2 9 0 1 3 C1 D 4 5 P F 2 9 1 3 3 C1 D 4 5 P F 2 9 0 4 3 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 C1 D 5 0 P F 2 9 0 1 3 C1 D 5 0 P F 2 9 1 3 3 C1 D 5 0 P F 2 9 0 4 3 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 C1 D 6 0 P F 2 9 0 1 3 C1 D 6 0 P F 2 9 1 3 3 C1 D 6 0 P F 2 9 0 4 3 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 Tail Length .475 [12.07] (Dim. “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 C1 D 1 8 P F 2 9 0 1 5 C1 D 1 8 P F 2 9 1 3 5 C1 D 1 8 P F 2 9 0 4 5 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 C1 D 2 0 P F 2 9 0 1 5 C1 D 2 0 P F 2 9 1 3 5 C1 D 2 0 P F 2 9 0 4 5 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 C1 D 2 2 P F 2 9 0 1 5 C1 D 2 2 P F 2 9 1 3 5 C1 D 2 2 P F 2 9 0 4 5 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 C1 D 2 5 P F 2 9 0 1 5 C1 D 2 5 P F 2 9 1 3 5 C1 D 2 5 P F 2 9 0 4 5 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 C1 D 2 8 P F 2 9 0 1 5 C1 D 2 8 P F 2 9 1 3 5 C1 D 2 8 P F 2 9 0 4 5 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 C1 D 3 0 P F 2 9 0 1 5 C1 D 3 0 P F 2 9 1 3 5 C1 D 3 0 P F 2 9 0 4 5 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 C1 D 3 5 P F 2 9 0 1 5 C1 D 3 5 P F 2 9 1 3 5 C1 D 3 5 P F 2 9 0 4 5 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 C1 D 3 6 P F 2 9 0 1 5 C1 D 3 6 P F 2 9 1 3 5 C1 D 3 6 P F 2 9 0 4 5 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 C1 D 4 0 P F 2 9 0 1 5 C1 D 4 0 P F 2 9 1 3 5 C1 D 4 0 P F 2 9 0 4 5 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 C1 D 4 3 P F 2 9 0 1 5 C1 D 4 3 P F 2 9 1 3 5 C1 D 4 3 P F 2 9 0 4 5 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 C1 D 4 5 P F 2 9 0 1 5 C1 D 4 5 P F 2 9 1 3 5 C1 D 4 5 P F 2 9 0 4 5 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 C1 D 5 0 P F 2 9 0 1 5 C1 D 5 0 P F 2 9 1 3 5 C1 D 5 0 P F 2 9 0 4 5 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 C1 D 6 0 P F 2 9 0 1 5 C1 D 6 0 P F 2 9 1 3 5 C1 D 6 0 P F 2 9 0 4 5 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 131 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100" [2.54] Centerline / .100" [2.54] Row-to-Row with Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth.350 [8.84] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .625 [15.88] (Dim. “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 C1 D 1 8 P F 2 9 0 1 7 C1 D 1 8 P F 2 9 1 3 7 C1 D 1 8 P F 2 9 0 4 7 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 C1 D 2 0 P F 2 9 0 1 7 C1 D 2 0 P F 2 9 1 3 7 C1 D 2 0 P F 2 9 0 4 7 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 C1 D 2 2 P F 2 9 0 1 7 C1 D 2 2 P F 2 9 1 3 7 C1 D 2 2 P F 2 9 0 4 7 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 C1 D 2 5 P F 2 9 0 1 7 C1 D 2 5 P F 2 9 1 3 7 C1 D 2 5 P F 2 9 0 4 7 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 C1 D 2 8 P F 2 9 0 1 7 C1 D 2 8 P F 2 9 1 3 7 C1 D 2 8 P F 2 9 0 4 7 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 C1 D 3 0 P F 2 9 0 1 7 C1 D 3 0 P F 2 9 1 3 7 C1 D 3 0 P F 2 9 0 4 7 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 C1 D 3 5 P F 2 9 0 1 7 C1 D 3 5 P F 2 9 1 3 7 C1 D 3 5 P F 2 9 0 4 7 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 C1 D 3 6 P F 2 9 0 1 7 C1 D 3 6 P F 2 9 1 3 7 C1 D 3 6 P F 2 9 0 4 7 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 C1 D 4 0 P F 2 9 0 1 7 C1 D 4 0 P F 2 9 1 3 7 C1 D 4 0 P F 2 9 0 4 7 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 C1 D 4 3 P F 2 9 0 1 7 C1 D 4 3 P F 2 9 1 3 7 C1 D 4 3 P F 2 9 0 4 7 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 C1 D 4 5 P F 2 9 0 1 7 C1 D 4 5 P F 2 9 1 3 7 C1 D 4 5 P F 2 9 0 4 7 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 C1 D 5 0 P F 2 9 0 1 7 C1 D 5 0 P F 2 9 1 3 7 C1 D 5 0 P F 2 9 0 4 7 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 C1 D 6 0 P F 2 9 0 1 7 C1 D 6 0 P F 2 9 1 3 7 C1 D 6 0 P F 2 9 0 4 7 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 132 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline Press-Fit, Full Scoop Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified [5.2.313] Point of Contact by Canadian Standards Association, .395/.510 Card Slot Depth File No. LR49571 [10.03/12.95] Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB— .200 5lbs. min. [356 N] [5.08] Insertion Force—10 oz. [44.5 N] max. measured with a .0700 ± .0001 [1.80±.00254] THK polished blade per MIL-C-21097C Withdrawal Force—1 oz. min. B [4.5 N] measured with a .0540 ± .0001 C [3.37±.00254] THK polished test blade .020±.010 per MIL-C-21097C after sizing 3 times [.51±.25] Contact Gap with a .0700 ± .0001 [1.80±.00254] THK .390 blade [9.91] Insulator Body—High Temp. Glass filled thermoplastic, UL rating 94V-O .100 Color—Black [2.54] Spring Contact—Phosphor Bronze alloy Contact Plating—.000050 [0.00127] nickel underplate with .000030 B [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .395/.510 Card Slot Depth Electrical Properties [1.664.358] Ref. [10.03/12.95] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes J Contact Resistance—10 milliohms A Environmental Properties: C Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 Vibration— Dim E MIL-STD-202, method 204 .040±.003 [1.02±.08] Dia. Application Tooling: Insertion Tool—page 150 Related Product Data: .200 [5.08] Daughter Card Edge Pattern— .100 page 57 [2.54] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 133 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100 [2.54] Centerline / .200 [5.08] Row-to-Row Full Scoop No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .510 [12.95] Card Slot Depth .395 [10.03] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 W8 D 1 8 P F 2 9 0 1 2 W8 D 1 8 P F 2 9 0 4 2 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 W8 D 2 0 P F 2 9 0 1 2 W8 D 2 0 P F 2 9 0 4 2 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 W8 D 2 2 P F 2 9 0 1 2 W8 D 2 2 P F 2 9 0 4 2 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 W8 D 2 5 P F 2 9 0 1 2 W8 D 2 5 P F 2 9 0 4 2 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 W8 D 2 8 P F 2 9 0 1 2 W8 D 2 8 P F 2 9 0 4 2 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 W8 D 3 0 P F 2 9 0 1 2 W8 D 3 0 P F 2 9 0 4 2 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 W8 D 3 5 P F 2 9 0 1 2 W8 D 3 5 P F 2 9 0 4 2 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 W8 D 3 6 P F 2 9 0 1 2 W8 D 3 6 P F 2 9 0 4 2 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 W8 D 4 0 P F 2 9 0 1 2 W8 D 4 0 P F 2 9 0 4 2 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 W8 D 4 3 P F 2 9 0 1 2 W8 D 4 3 P F 2 9 0 4 2 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 W8 D 4 5 P F 2 9 0 1 2 W8 D 4 5 P F 2 9 0 4 2 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 W8 D 5 0 P F 2 9 0 1 2 W8 D 5 0 P F 2 9 0 4 2 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 W8 D 6 0 P F 2 9 0 1 2 W8 D 6 0 P F 2 9 0 4 2 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 Tail Length .180 [4.57] (DIM “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 W8 D 1 8 P F 2 9 0 1 3 W8 D 1 8 P F 2 9 0 4 3 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 W8 D 2 0 P F 2 9 0 1 3 W8 D 2 0 P F 2 9 0 4 3 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 W8 D 2 2 P F 2 9 0 1 3 W8 D 2 2 P F 2 9 0 4 3 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 W8 D 2 5 P F 2 9 0 1 3 W8 D 2 5 P F 2 9 0 4 3 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 W8 D 2 8 P F 2 9 0 1 3 W8 D 2 8 P F 2 9 0 4 3 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 W8 D 3 0 P F 2 9 0 1 3 W8 D 3 0 P F 2 9 0 4 3 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 W8 D 3 5 P F 2 9 0 1 3 W8 D 3 5 P F 2 9 0 4 3 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 W8 D 3 6 P F 2 9 0 1 3 W8 D 3 6 P F 2 9 0 4 3 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 W8 D 4 0 P F 2 9 0 1 3 W8 D 4 0 P F 2 9 0 4 3 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 W8 D 4 3 P F 2 9 0 1 3 W8 D 4 3 P F 2 9 0 4 3 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 W8 D 4 5 P F 2 9 0 1 3 W8 D 4 5 P F 2 9 0 4 3 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 W8 D 5 0 P F 2 9 0 1 3 W8 D 5 0 P F 2 9 0 4 3 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 W8 D 6 0 P F 2 9 0 1 3 W8 D 6 0 P F 2 9 0 4 3 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 134 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline, Press-Fit, Full Scoop with Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified [5.2.313] Point of Contact by Canadian Standards Association, .395/.510 Card Slot Depth File No. LR49571 [10.03/12.95] Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB— .200 5lbs. min. [356 N] [5.08] Insertion Force—10 oz. [44.5 N] max. measured with a .0700 ± .0001 [1.80±.00254] THK polished blade per MIL-C-21097C Withdrawal Force—1 oz. min. B [4.5 N] measured with a .0540 ± .0001 C [3.37±.00254] THK polished test blade per MIL-C-21097C after sizing 3 times .[0.5210±±..2051 0] Contact Gap with a .0700 ± .0001 [1.80±.00254] THK .390 blade [9.91] Insulator Body—High Temp. Glass filled thermoplastic, UL rating 94V-O .100 Color—Black [2.54] Spring Contact—Phosphor Bronze alloy Contact Plating—.000050 [0.00127] nickel underplate with .000030 B [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .395/.510 Card Slot Depth [10.03/12.95] Electrical Properties: .705 Ref. [17.91] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes J Initial Contact Resistance— 10 milliohms C Environmental Properties: A Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 Vibration— Dim C .040±.003 MIL-STD-202, method 204 [1.02±.08] Dia. Application Tooling: Insertion Tool—page 150 Related Product Data: .200 [5.08] Daughter Card Edge Pattern— .100 page 57 [2.54] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 135 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100 [2.54] Centerline / .200 [5.08] Row-to-Row Full Scoop with Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .510 [12.95] Card Slot Depth .395 [10.03] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 W8 D 1 8 P F 2 9 0 6 2 W8 D 1 8 P F 2 9 0 9 2 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 W8 D 2 0 P F 2 9 0 6 2 W8 D 2 0 P F 2 9 0 9 2 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 W8 D 2 2 P F 2 9 0 6 2 W8 D 2 2 P F 2 9 0 9 2 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 W8 D 2 5 P F 2 9 0 6 2 W8 D 2 5 P F 2 9 0 9 2 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 W8 D 2 8 P F 2 9 0 6 2 W8 D 2 8 P F 2 9 0 9 2 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 W8 D 3 0 P F 2 9 0 6 2 W8 D 3 0 P F 2 9 0 9 2 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 W8 D 3 5 P F 2 9 0 6 2 W8 D 3 5 P F 2 9 0 9 2 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 W8 D 3 6 P F 2 9 0 6 2 W8 D 3 6 P F 2 9 0 9 2 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 W8 D 4 0 P F 2 9 0 6 2 W8 D 4 0 P F 2 9 0 9 2 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 W8 D 4 3 P F 2 9 0 6 2 W8 D 4 3 P F 2 9 0 9 2 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 W8 D 4 5 P F 2 9 0 6 2 W8 D 4 5 P F 2 9 0 9 2 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 W8 D 5 0 P F 2 9 0 6 2 W8 D 5 0 P F 2 9 0 9 2 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 W8 D 6 0 P F 2 9 0 6 2 W8 D 6 0 P F 2 9 0 9 2 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 Tail Length .180 [4.57] (DIM “J”) 18 2. 0 3 4 1. 9 0 4 1. 7 0 0 W8 D 1 8 P F 2 9 0 6 3 W8 D 1 8 P F 2 9 0 9 3 51 . 6 6 48 . 3 6 43 . 1 8 20 2. 2 3 4 2. 1 0 4 1. 9 0 0 W8 D 2 0 P F 2 9 0 6 3 W8 D 2 0 P F 2 9 0 9 3 56 . 7 4 53 . 4 4 48 . 2 6 22 2. 4 3 4 2. 3 0 4 2. 1 0 0 W8 D 2 2 P F 2 9 0 6 3 W8 D 2 2 P F 2 9 0 9 3 61 . 8 2 58 . 5 2 53 . 3 4 25 2. 7 3 4 2. 6 0 4 2. 4 0 0 W8 D 2 5 P F 2 9 0 6 3 W8 D 2 5 P F 2 9 0 9 3 69 . 4 4 66 . 1 4 60 . 9 6 28 3. 0 3 4 2. 9 0 4 2. 7 0 0 W8 D 2 8 P F 2 9 0 6 3 W8 D 2 8 P F 2 9 0 9 3 77 . 0 6 73 . 7 6 68 . 5 8 30 3. 2 3 4 3. 1 0 4 2. 9 0 0 W8 D 3 0 P F 2 9 0 6 3 W8 D 3 0 P F 2 9 0 9 3 82 . 1 4 78 . 8 4 73 . 6 6 35 3. 7 3 4 3. 6 0 4 3. 4 0 0 W8 D 3 5 P F 2 9 0 6 3 W8 D 3 5 P F 2 9 0 9 3 94 . 8 4 91 . 5 4 86 . 3 6 36 3. 8 3 4 3. 7 0 4 3. 5 0 0 W8 D 3 6 P F 2 9 0 6 3 W8 D 3 6 P F 2 9 0 9 3 97 . 3 8 94 . 0 8 88 . 9 0 40 4. 2 3 4 4. 1 0 4 3. 9 0 0 W8 D 4 0 P F 2 9 0 6 3 W8 D 4 0 P F 2 9 0 9 3 10 7 . 5 4 10 4 . 2 4 99 . 0 6 43 4. 5 3 4 4. 4 0 4 4. 2 0 0 W8 D 4 3 P F 2 9 0 6 3 W8 D 4 3 P F 2 9 0 9 3 11 5 . 1 6 11 1 . 8 6 10 6 . 6 8 45 4. 7 3 4 4. 6 0 4 4. 4 0 0 W8 D 4 5 P F 2 9 0 6 3 W8 D 4 5 P F 2 9 0 9 3 12 0 . 2 4 11 6 . 9 4 11 1 . 7 6 50 5. 2 3 4 5. 1 0 4 4. 9 0 0 W8 D 5 0 P F 2 9 0 6 3 W8 D 5 0 P F 2 9 0 9 3 13 2 . 9 4 12 9 . 6 4 12 4 . 4 6 60 6. 2 3 4 6. 1 0 4 5. 9 0 0 W8 D 6 0 P F 2 9 0 6 3 W8 D 6 0 P F 2 9 0 9 3 15 8 . 3 4 15 5 . 0 4 14 9 . 8 6 136 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline, Press-Fit without Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., Accepts .054 to .071 Thk. PC Board [3.37 to 1.80] File No. E60980 nCertified by Canadian . 1 2 0±. 0 0 3 Standards [3.05±.25] Point of Card Slot .300[7.62] Association, Contact Depth .350[8.89] File No. LR49571 .415[10.54] Physical Properties: Insulation Resistance— 5000 megohms minimum. Contact Retention Into PCB—5 lbs. J [356 N] Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel .200 [5.08] blade. Insulator Body—Glass filled thermoplastic, UL rating 94V-O Color—Black A Contacts—High strength copper alloy. B Contact Plating—.000050 [0.00127] nickel underplate with .000030 C [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .[0.5210] Contact Gap .365 Electrical Properties: [9.27] Ref. Operating Voltage—600 VDC (sea level) .100 Current Rating—3 Amperes [2.54] Initial Contact Resistance— 10 milliohms Environmental Properties: .550 Operating Temperature— [13.97] -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 Vibration— J MIL-STD-202, method 204 Application Tooling: .100 .025Sq. Typ. [2.54] [.64] Insertion Tool—page 150 Related Product Data: C Daughter Card Edge Pattern— page 57 Dim C .040±.003 [1.02±.08] Dia. .200 [5.08] Note: Open ends and open/closed .100 ends are available. Consult Tyco [2.54] E l e c t r o n i c s . 137 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row without Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (“J”) 6 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 P F 2 9 0 3 2 C8 D 0 6 P F 2 9 1 4 2 C8 D 0 6 P F 2 9 0 2 2 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 P F 2 9 0 3 2 C8 D 1 0 P F 2 9 1 4 2 C8 D 1 0 P F 2 9 0 2 2 32 . 0 0 27 . 9 4 22 . 8 6 12 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 P F 2 9 0 3 2 C8 D 1 2 P F 2 9 1 4 2 C8 D 1 2 P F 2 9 0 2 2 37 . 0 8 33 . 0 2 27 . 9 4 15 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 P F 2 9 0 3 2 C8 D 1 5 P F 2 9 1 4 2 C8 D 1 5 P F 2 9 0 2 2 44 . 7 0 40 . 6 4 35 . 5 6 20 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 P F 2 9 0 3 2 C8 D 2 0 P F 2 9 1 4 2 C8 D 2 0 P F 2 9 0 2 2 57 . 4 0 53 . 3 4 48 . 2 6 22 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 P F 2 9 0 3 2 C8 D 2 2 P F 2 9 1 4 2 C8 D 2 2 P F 2 9 0 2 2 62 . 4 8 58 . 4 2 53 . 3 4 25 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 P F 2 9 0 3 2 C8 D 2 5 P F 2 9 1 4 2 C8 D 2 5 P F 2 9 0 2 2 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 P F 2 9 0 3 2 C8 D 2 8 P F 2 9 1 4 2 C8 D 2 8 P F 2 9 0 2 2 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 P F 2 9 0 3 2 C8 D 3 0 P F 2 9 1 4 2 C8 D 3 0 P F 2 9 0 2 2 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 P F 2 9 0 3 2 C8 D 3 1 P F 2 9 1 4 2 C8 D 3 1 P F 2 9 0 2 2 85 . 3 4 81 . 2 8 76 . 2 0 35 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 P F 2 9 0 3 2 C8 D 3 5 P F 2 9 1 4 2 C8 D 3 5 P F 2 9 0 2 2 95 . 5 0 91 . 4 4 86 . 3 6 36 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 P F 2 9 0 3 2 C8 D 3 6 P F 2 9 1 4 2 C8 D 3 6 P F 2 9 0 2 2 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 P F 2 9 0 3 2 C8 D 4 0 P F 2 9 1 4 2 C8 D 4 0 P F 2 9 0 2 2 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 P F 2 9 0 3 2 C8 D 4 3 P F 2 9 1 4 2 C8 D 4 3 P F 2 9 0 2 2 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 50 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 P F 2 9 0 3 2 C8 D 5 0 P F 2 9 1 4 2 C8 D 5 0 P F 2 9 0 2 2 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 P F 2 9 0 3 2 C8 D 6 0 P F 2 9 1 4 2 C8 D 6 0 P F 2 9 0 2 2 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 Tail Length .180 [4.57] (“J”) 6 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 P F 2 9 0 3 3 C8 D 0 6 P F 2 9 1 4 3 C8 D 0 6 P F 2 9 0 2 3 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 P F 2 9 0 3 3 C8 D 1 0 P F 2 9 1 4 3 C8 D 1 0 P F 2 9 0 2 3 32 . 0 0 27 . 9 4 22 . 8 6 12 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 P F 2 9 0 3 3 C8 D 1 2 P F 2 9 1 4 3 C8 D 1 2 P F 2 9 0 2 3 37 . 0 8 33 . 0 2 27 . 9 4 15 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 P F 2 9 0 3 3 C8 D 1 5 P F 2 9 1 4 3 C8 D 1 5 P F 2 9 0 2 3 44 . 7 0 40 . 6 4 35 . 5 6 20 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 P F 2 9 0 3 3 C8 D 2 0 P F 2 9 1 4 3 C8 D 2 0 P F 2 9 0 2 3 57 . 4 0 53 . 3 4 48 . 2 6 22 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 P F 2 9 0 3 3 C8 D 2 2 P F 2 9 1 4 3 C8 D 2 2 P F 2 9 0 2 3 62 . 4 8 58 . 4 2 53 . 3 4 25 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 P F 2 9 0 3 3 C8 D 2 5 P F 2 9 1 4 3 C8 D 2 5 P F 2 9 0 2 3 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 P F 2 9 0 3 3 C8 D 2 8 P F 2 9 1 4 3 C8 D 2 8 P F 2 9 0 2 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 P F 2 9 0 3 3 C8 D 3 0 P F 2 9 1 4 3 C8 D 3 0 P F 2 9 0 2 3 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 P F 2 9 0 3 3 C8 D 3 1 P F 2 9 1 4 3 C8 D 3 1 P F 2 9 0 2 3 85 . 3 4 81 . 2 8 76 . 2 0 35 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 P F 2 9 0 3 3 C8 D 3 5 P F 2 9 1 4 3 C8 D 3 5 P F 2 9 0 2 3 95 . 5 0 91 . 4 4 86 . 3 6 36 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 P F 2 9 0 3 3 C8 D 3 6 P F 2 9 1 4 3 C8 D 3 6 P F 2 9 0 2 3 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 P F 2 9 0 3 3 C8 D 4 0 P F 2 9 1 4 3 C8 D 4 0 P F 2 9 0 2 3 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 P F 2 9 0 3 3 C8 D 4 3 P F 2 9 1 4 3 C8 D 4 3 P F 2 9 0 2 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 50 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 P F 2 9 0 3 3 C8 D 5 0 P F 2 9 1 4 3 C8 D 5 0 P F 2 9 0 2 3 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 P F 2 9 0 3 3 C8 D 6 0 P F 2 9 1 4 3 C8 D 6 0 P F 2 9 0 2 3 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 138 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline, Press-Fit with Standoffs Product Facts nRecognized under the Component Program of Underwriters Accepts [1.0.3574 ttoo 1.0.8701] Thk. PC Board Laboratories Inc., File No. E60980 . 1 2 0±. 0 0 3 nCertified [3.05±.25] bSyta Cnadnaarddsia n CPooinntta ocft CaDredp Sthlot ...433105500[1[[780...685294]]] Association, File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] .200 Insertion/Withdrawal Force— [5.08] 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. A Insulator Body—Glass filled thermoplastic, UL rating 94V-O B Color—Black C Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] nickel underplate with .000030 .020 [0.00076] gold in the mating area, .365 [.51] Contact Gap tin/lead on tails, .000100 [0.00254] [9.27] Ref. minimum Electrical Properties: .100 [2.54] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance— .610 [15.49] 10 milliohms Environmental Properties: Operating Temperature— J -55˚C to +125˚C Temperature Cycling— MViIbLr-aStTiDo-n2—02 method 107 [2.1.5040] .[0.6245] Sq. MIL-STD-202, method 204 C Application Tooling: Insertion Tool—page 150 Dim C .040±.003 Related Product Data: [1.02±.08] Dia. Daughter Card Edge Pattern— page 57 .200 [5.08] .100 [2.54] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 139 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) OOrrddeerriinngg IInnffoorrmmaattiioonn .100 [2.54] Center-to-Center/.200 [5.08] Row-To-Row with Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (dim “J”) 6 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 P F 2 9 0 1 2 C8 D 0 6 P F 2 9 1 3 2 C8 D 0 6 P F 2 9 0 4 2 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 P F 2 9 0 1 2 C8 D 1 0 P F 2 9 1 3 2 C8 D 1 0 P F 2 9 0 4 2 32 . 0 0 27 . 9 4 22 . 8 6 12 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 P F 2 9 0 1 2 C8 D 1 2 P F 2 9 1 3 2 C8 D 1 2 P F 2 9 0 4 2 37 . 0 8 33 . 0 2 27 . 9 4 15 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 P F 2 9 0 1 2 C8 D 1 5 P F 2 9 1 3 2 C8 D 1 5 P F 2 9 0 4 2 44 . 7 0 40 . 6 4 35 . 5 6 20 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 P F 2 9 0 1 2 C8 D 2 0 P F 2 9 1 3 2 C8 D 2 0 P F 2 9 0 4 2 57 . 4 0 53 . 3 4 48 . 2 6 22 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 P F 2 9 0 1 2 C8 D 2 2 P F 2 9 1 3 2 C8 D 2 2 P F 2 9 0 4 2 62 . 4 8 58 . 4 2 53 . 3 4 25 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 P F 2 9 0 1 2 C8 D 2 5 P F 2 9 1 3 2 C8 D 2 5 P F 2 9 0 4 2 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 P F 2 9 0 1 2 C8 D 2 8 P F 2 9 1 3 2 C8 D 2 8 P F 2 9 0 4 2 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 P F 2 9 0 1 2 C8 D 3 0 P F 2 9 1 3 2 C8 D 3 0 P F 2 9 0 4 2 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 P F 2 9 0 1 2 C8 D 3 1 P F 2 9 1 3 2 C8 D 3 1 P F 2 9 0 4 2 85 . 3 4 81 . 2 8 76 . 2 0 35 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 P F 2 9 0 1 2 C8 D 3 5 P F 2 9 1 3 2 C8 D 3 5 P F 2 9 0 4 2 95 . 5 0 91 . 4 4 86 . 3 6 36 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 P F 2 9 0 1 2 C8 D 3 6 P F 2 9 1 3 2 C8 D 3 6 P F 2 9 0 4 2 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 P F 2 9 0 1 2 C8 D 4 0 P F 2 9 1 3 2 C8 D 4 0 P F 2 9 0 4 2 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 P F 2 9 0 1 2 C8 D 4 3 P F 2 9 1 3 2 C8 D 4 3 P F 2 9 0 4 2 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 50 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 P F 2 9 0 1 2 C8 D 5 0 P F 2 9 1 3 2 C8 D 5 0 P F 2 9 0 4 2 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 P F 2 9 0 1 2 C8 D 6 0 P F 2 9 1 3 2 C8 D 6 0 P F 2 9 0 4 2 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 Tail Length .180 [4.57] (dim “J”) 6 0. 8 6 0 0. 7 0 0 0. 5 0 0 C8 D 0 6 P F 2 9 0 1 3 C8 D 0 6 P F 2 9 1 3 3 C8 D 0 6 P F 2 9 0 4 3 21 . 8 4 17 . 7 8 12 . 7 0 10 1. 2 6 0 1. 1 0 0 0. 9 0 0 C8 D 1 0 P F 2 9 0 1 3 C8 D 1 0 P F 2 9 1 3 3 C8 D 1 0 P F 2 9 0 4 3 32 . 0 0 27 . 9 4 22 . 8 6 12 1. 4 6 0 1. 3 0 0 1. 1 0 0 C8 D 1 2 P F 2 9 0 1 3 C8 D 1 2 P F 2 9 1 3 3 C8 D 1 2 P F 2 9 0 4 3 37 . 0 8 33 . 0 2 27 . 9 4 15 1. 7 6 0 1. 6 0 0 1. 4 0 0 C8 D 1 5 P F 2 9 0 1 3 C8 D 1 5 P F 2 9 1 3 3 C8 D 1 5 P F 2 9 0 4 3 44 . 7 0 40 . 6 4 35 . 5 6 20 2. 2 6 0 2. 1 0 0 1. 9 0 0 C8 D 2 0 P F 2 9 0 1 3 C8 D 2 0 P F 2 9 1 3 3 C8 D 2 0 P F 2 9 0 4 3 57 . 4 0 53 . 3 4 48 . 2 6 22 2. 4 6 0 2. 3 0 0 2. 1 0 0 C8 D 2 2 P F 2 9 0 1 3 C8 D 2 2 P F 2 9 1 3 3 C8 D 2 2 P F 2 9 0 4 3 62 . 4 8 58 . 4 2 53 . 3 4 25 2. 7 6 0 2. 6 0 0 2. 4 0 0 C8 D 2 5 P F 2 9 0 1 3 C8 D 2 5 P F 2 9 1 3 3 C8 D 2 5 P F 2 9 0 4 3 70 . 1 0 66 . 0 4 60 . 9 6 28 3. 0 6 0 2. 9 0 0 2. 7 0 0 C8 D 2 8 P F 2 9 0 1 3 C8 D 2 8 P F 2 9 1 3 3 C8 D 2 8 P F 2 9 0 4 3 77 . 7 2 73 . 6 6 68 . 5 8 30 3. 2 6 0 3. 1 0 0 2. 9 0 0 C8 D 3 0 P F 2 9 0 1 3 C8 D 3 0 P F 2 9 1 3 3 C8 D 3 0 P F 2 9 0 4 3 82 . 8 0 78 . 7 4 73 . 6 6 31 3. 3 6 0 3. 2 0 0 3. 0 0 0 C8 D 3 1 P F 2 9 0 1 3 C8 D 3 1 P F 2 9 1 3 3 C8 D 3 1 P F 2 9 0 4 3 85 . 3 4 81 . 2 8 76 . 2 0 35 3. 7 6 0 3. 6 0 0 3. 4 0 0 C8 D 3 5 P F 2 9 0 1 3 C8 D 3 5 P F 2 9 1 3 3 C8 D 3 5 P F 2 9 0 4 3 95 . 5 0 91 . 4 4 86 . 3 6 36 3. 8 6 0 3. 7 0 0 3. 5 0 0 C8 D 3 6 P F 2 9 0 1 3 C8 D 3 6 P F 2 9 1 3 3 C8 D 3 6 P F 2 9 0 4 3 98 . 0 4 93 . 9 8 88 . 9 0 40 4. 2 6 0 4. 1 0 0 3. 9 0 0 C8 D 4 0 P F 2 9 0 1 3 C8 D 4 0 P F 2 9 1 3 3 C8 D 4 0 P F 2 9 0 4 3 10 8 . 2 0 10 4 . 1 4 99 . 0 6 43 4. 5 6 0 4. 4 0 0 4. 2 0 0 C8 D 4 3 P F 2 9 0 1 3 C8 D 4 3 P F 2 9 1 3 3 C8 D 4 3 P F 2 9 0 4 3 11 5 . 8 2 11 1 . 7 6 10 6 . 6 8 50 5. 2 6 0 5. 1 0 0 4. 9 0 0 C8 D 5 0 P F 2 9 0 1 3 C8 D 5 0 P F 2 9 1 3 3 C8 D 5 0 P F 2 9 0 4 3 13 3 . 6 0 12 9 . 5 4 12 4 . 4 6 60 6. 2 6 0 6. 1 0 0 5. 9 0 0 C8 D 6 0 P F 2 9 0 1 3 C8 D 6 0 P F 2 9 1 3 3 C8 D 6 0 P F 2 9 0 4 3 15 9 . 0 0 15 4 . 9 4 14 9 . 8 6 140 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .125 x .250 [3.18 x 6.35] Centerline without Standoffs Product Facts nRecognized under the Component Program of Underwriters Accepts .054 to .071 Thk. PC Board [1.37 to 1.80] Laboratories Inc., File No. E60980 . 1 2 0±. 0 0 3 nCertified [3.05±.25] by Canadian Point of Card Slot .300[7.62] Standards Contact Depth .4.31550[1[80..8594]] Association, File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] .250 Insertion/Withdrawal Force— [6.35] 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. A Insulator Body—Glass filled thermoplastic, UL rating 94V-O B Color—Black Contacts—High strength copper alloy. C Contact Plating—.000050 [0.00127] nickel underplate with .000030 .020 [0.00076] gold in the mating area, [.51] Contact Gap .365 tin/lead on tails, .000100 [0.00254] [9.27] minimum Electrical Properties: .125 [3.18] Operating Voltage—1000 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms .550 [13.97] Environmental Properties: Operating Temperature— -55˚C to +125˚C Temperature Cycling— J MIL-STD-202 method 107 Vibration— MIL-STD-202, method 204 [.31.2158] .[0.6245] Sq. Typ. Application Tooling: C Insertion Tool—page 150 Related Product Data: Daughter Card Edge Pattern— Dim C page 57 .040±.003 [1.02±.08] Dia. .250 [6.35] .125 Note: Open ends and open/closed [3.18] ends are available. Consult Tyco E l e c t r o n i c s . 141 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .125 [3.18] Centerline /.250 [6.35] Row-to-Row without Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 6 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 P F 2 9 0 3 2 C7 D 0 6 P F 2 9 1 4 2 C7 D 0 6 P F 2 9 0 2 2 26 . 2 9 22 . 2 3 15 . 8 8 10 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 P F 2 9 0 3 2 C7 D 1 0 P F 2 9 1 4 2 C7 D 1 0 P F 2 9 0 2 2 38 . 9 9 34 . 9 3 28 . 5 8 12 1. 7 8 5 1. 6 2 5 1. 3 7 5 C7 D 1 2 P F 2 9 0 3 2 C7 D 1 2 P F 2 9 1 4 2 C7 D 1 2 P F 2 9 0 2 2 45 . 3 4 41 . 2 8 34 . 9 3 15 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 P F 2 9 0 3 2 C7 D 1 5 P F 2 9 1 4 2 C7 D 1 5 P F 2 9 0 2 2 54 . 8 6 50 . 8 0 44 . 4 5 18 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 P F 2 9 0 3 2 C7 D 1 8 P F 2 9 1 4 2 C7 D 1 8 P F 2 9 0 2 2 64 . 3 9 60 . 3 3 53 . 9 8 20 2. 7 8 5 2. 6 2 5 2. 3 7 5 C7 D 2 0 P F 2 9 0 3 2 C7 D 2 0 P F 2 9 1 4 2 C7 D 2 0 P F 2 9 0 2 2 70 . 7 4 66 . 6 8 60 . 3 3 22 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 P F 2 9 0 3 2 C7 D 2 2 P F 2 9 1 4 2 C7 D 2 2 P F 2 9 0 2 2 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 P F 2 9 0 3 2 C7 D 2 5 P F 2 9 1 4 2 C7 D 2 5 P F 2 9 0 2 2 86 . 6 1 82 . 5 5 76 . 2 0 28 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 P F 2 9 0 3 2 C7 D 2 8 P F 2 9 1 4 2 C7 D 2 8 P F 2 9 0 2 2 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 P F 2 9 0 3 2 C7 D 3 0 P F 2 9 1 4 2 C7 D 3 0 P F 2 9 0 2 2 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 P F 2 9 0 3 2 C7 D 3 1 P F 2 9 1 4 2 C7 D 3 1 P F 2 9 0 2 2 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 P F 2 9 0 3 2 C7 D 3 5 P F 2 9 1 4 2 C7 D 3 5 P F 2 9 0 2 2 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 P F 2 9 0 3 2 C7 D 3 6 P F 2 9 1 4 2 C7 D 3 6 P F 2 9 0 2 2 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 P F 2 9 0 3 2 C7 D 4 0 P F 2 9 1 4 2 C7 D 4 0 P F 2 9 0 2 2 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 P F 2 9 0 3 2 C7 D 4 3 P F 2 9 1 4 2 C7 D 4 3 P F 2 9 0 2 2 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 P F 2 9 0 3 2 C7 D 5 0 P F 2 9 1 4 2 C7 D 5 0 P F 2 9 0 2 2 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 Tail Length .180 [4.57] (DIM “J”) 6 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 P F 2 9 0 3 3 C7 D 0 6 P F 2 9 1 4 3 C7 D 0 6 P F 2 9 0 2 3 26 . 2 9 22 . 2 3 15 . 8 8 10 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 P F 2 9 0 3 3 C7 D 1 0 P F 2 9 1 4 3 C7 D 1 0 P F 2 9 0 2 3 38 . 9 9 34 . 9 3 28 . 5 8 12 1. 7 8 5 1. 6 2 5 1. 3 7 5 C7 D 1 2 P F 2 9 0 3 3 C7 D 1 2 P F 2 9 1 4 3 C7 D 1 2 P F 2 9 0 2 3 45 . 3 4 41 . 2 8 34 . 9 3 15 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 P F 2 9 0 3 3 C7 D 1 5 P F 2 9 1 4 3 C7 D 1 5 P F 2 9 0 2 3 54 . 8 6 50 . 8 0 44 . 4 5 18 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 P F 2 9 0 3 3 C7 D 1 8 P F 2 9 1 4 3 C7 D 1 8 P F 2 9 0 2 3 64 . 3 9 60 . 3 3 53 . 9 8 20 2. 7 8 5 2. 6 2 5 2. 3 7 5 C7 D 2 0 P F 2 9 0 3 3 C7 D 2 0 P F 2 9 1 4 3 C7 D 2 0 P F 2 9 0 2 3 70 . 7 4 66 . 6 8 60 . 3 3 22 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 P F 2 9 0 3 3 C7 D 2 2 P F 2 9 1 4 3 C7 D 2 2 P F 2 9 0 2 3 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 P F 2 9 0 3 3 C7 D 2 5 P F 2 9 1 4 3 C7 D 2 5 P F 2 9 0 2 3 86 . 6 1 82 . 5 5 76 . 2 0 28 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 P F 2 9 0 3 3 C7 D 2 8 P F 2 9 1 4 3 C7 D 2 8 P F 2 9 0 2 3 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 P F 2 9 0 3 3 C7 D 3 0 P F 2 9 1 4 3 C7 D 3 0 P F 2 9 0 2 3 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 P F 2 9 0 3 3 C7 D 3 1 P F 2 9 1 4 3 C7 D 3 1 P F 2 9 0 2 3 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 P F 2 9 0 3 3 C7 D 3 5 P F 2 9 1 4 3 C7 D 3 5 P F 2 9 0 2 3 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 P F 2 9 0 3 3 C7 D 3 6 P F 2 9 1 4 3 C7 D 3 6 P F 2 9 0 2 3 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 P F 2 9 0 3 3 C7 D 4 0 P F 2 9 1 4 3 C7 D 4 0 P F 2 9 0 2 3 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 P F 2 9 0 3 3 C7 D 4 3 P F 2 9 1 4 3 C7 D 4 3 P F 2 9 0 2 3 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 P F 2 9 0 3 3 C7 D 5 0 P F 2 9 1 4 3 C7 D 5 0 P F 2 9 0 2 3 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 142 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .125 x .250 [3.18 x 6.35] Centerline with Standoffs Product Facts nRecognized under the Component Program of Underwriters Accepts [.10.5347 ttoo .10.7810] Thk. PC Board Laboratories Inc., File No. E60980 . 1 2 0±. 0 0 3 nCertified [3.05±.25] by Canadian Point of Card Slot .300[7.62] Contact Depth .350[8.89] Standards .415[10.54] Association, File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] .200 Insertion/Withdrawal Force— [5.08] 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. A Insulator Body—Glass filled B thermoplastic, UL rating 94V-O Color—Black C Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] .020 nickel underplate with .000030 [.51] Contact Gap [0.00076] gold in the mating area, .365 [9.27] tin/lead on tails, .000100 [0.00254] minimum .125 Electrical Properties: [3.18] Operating Voltage—1000 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance— .550 10 milliohms [13.97] Environmental Properties: Operating Temperature— -55˚C to +125˚C J Temperature Cycling— MIL-STD-202 method 107 VMiIbLr-aStTiDo-n2—02, method 204 [3.1.1285] .[0.6245] Sq. Typ. Application Tooling: C Insertion Tool—page 150 Related Product Data: Dim C Daughter Card Edge Pattern— .[014.002±±.0.0083] Dia. page 57 .250 [6.35] .125 [3.18] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 143 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .125 [3.18] Centerline /.250 [6.35] Row-to-Row with Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 6 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 P F 2 9 0 1 2 C7 D 0 6 P F 2 9 1 3 2 C7 D 0 6 P F 2 9 0 4 2 26 . 2 9 22 . 2 3 15 . 8 8 10 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 P F 2 9 0 1 2 C7 D 1 0 P F 2 9 1 3 2 C7 D 1 0 P F 2 9 0 4 2 38 . 9 9 34 . 9 3 28 . 5 8 12 1. 7 8 5 1. 6 2 5 1. 3 7 5 C7 D 1 2 P F 2 9 0 1 2 C7 D 1 2 P F 2 9 1 3 2 C7 D 1 2 P F 2 9 0 4 2 45 . 3 4 41 . 2 8 34 . 9 3 15 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 P F 2 9 0 1 2 C7 D 1 5 P F 2 9 1 3 2 C7 D 1 5 P F 2 9 0 4 2 54 . 8 6 50 . 8 0 44 . 4 5 18 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 P F 2 9 0 1 2 C7 D 1 8 P F 2 9 1 3 2 C7 D 1 8 P F 2 9 0 4 2 64 . 3 9 60 . 3 3 53 . 9 8 20 2. 7 8 5 2. 6 2 5 2. 3 7 5 C7 D 2 0 P F 2 9 0 1 2 C7 D 2 0 P F 2 9 1 3 2 C7 D 2 0 P F 2 9 0 4 2 70 . 7 4 66 . 6 8 60 . 3 3 22 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 P F 2 9 0 1 2 C7 D 2 2 P F 2 9 1 3 2 C7 D 2 2 P F 2 9 0 4 2 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 P F 2 9 0 1 2 C7 D 2 5 P F 2 9 1 3 2 C7 D 2 5 P F 2 9 0 4 2 86 . 6 1 82 . 5 5 76 . 2 0 28 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 P F 2 9 0 1 2 C7 D 2 8 P F 2 9 1 3 2 C7 D 2 8 P F 2 9 0 4 2 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 P F 2 9 0 1 2 C7 D 3 0 P F 2 9 1 3 2 C7 D 3 0 P F 2 9 0 4 2 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 P F 2 9 0 1 2 C7 D 3 1 P F 2 9 1 3 2 C7 D 3 1 P F 2 9 0 4 2 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 P F 2 9 0 1 2 C7 D 3 5 P F 2 9 1 3 2 C7 D 3 5 P F 2 9 0 4 2 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 P F 2 9 0 1 2 C7 D 3 6 P F 2 9 1 3 2 C7 D 3 6 P F 2 9 0 4 2 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 P F 2 9 0 1 2 C7 D 4 0 P F 2 9 1 3 2 C7 D 4 0 P F 2 9 0 4 2 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 P F 2 9 0 1 2 C7 D 4 3 P F 2 9 1 3 2 C7 D 4 3 P F 2 9 0 4 2 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 P F 2 9 0 1 2 C7 D 5 0 P F 2 9 1 3 2 C7 D 5 0 P F 2 9 0 4 2 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 Tail Length .180 [4.57] (DIM “J”) 6 1. 0 3 5 0. 8 7 5 0. 6 2 5 C7 D 0 6 P F 2 9 0 1 3 C7 D 0 6 P F 2 9 1 3 3 C7 D 0 6 P F 2 9 0 4 3 26 . 2 9 22 . 2 3 15 . 8 8 10 1. 5 3 5 1. 3 7 5 1. 1 2 5 C7 D 1 0 P F 2 9 0 1 3 C7 D 1 0 P F 2 9 1 3 3 C7 D 1 0 P F 2 9 0 4 3 38 . 9 9 34 . 9 3 28 . 5 8 12 1. 7 8 5 1. 6 2 5 1. 3 7 5 C7 D 1 2 P F 2 9 0 1 3 C7 D 1 2 P F 2 9 1 3 3 C7 D 1 2 P F 2 9 0 4 3 45 . 3 4 41 . 2 8 34 . 9 3 15 2. 1 6 0 2. 0 0 0 1. 7 5 0 C7 D 1 5 P F 2 9 0 1 3 C7 D 1 5 P F 2 9 1 3 3 C7 D 1 5 P F 2 9 0 4 3 54 . 8 6 50 . 8 0 44 . 4 5 18 2. 5 3 5 2. 3 7 5 2. 1 2 5 C7 D 1 8 P F 2 9 0 1 3 C7 D 1 8 P F 2 9 1 3 3 C7 D 1 8 P F 2 9 0 4 3 64 . 3 9 60 . 3 3 53 . 9 8 20 2. 7 8 5 2. 6 2 5 2. 3 7 5 C7 D 2 0 P F 2 9 0 1 3 C7 D 2 0 P F 2 9 1 3 3 C7 D 2 0 P F 2 9 0 4 3 70 . 7 4 66 . 6 8 60 . 3 3 22 3. 0 3 5 2. 8 7 5 2. 6 2 5 C7 D 2 2 P F 2 9 0 1 3 C7 D 2 2 P F 2 9 1 3 3 C7 D 2 2 P F 2 9 0 4 3 77 . 0 9 73 . 0 3 66 . 6 8 25 3. 4 1 0 3. 2 5 0 3. 0 0 0 C7 D 2 5 P F 2 9 0 1 3 C7 D 2 5 P F 2 9 1 3 3 C7 D 2 5 P F 2 9 0 4 3 86 . 6 1 82 . 5 5 76 . 2 0 28 3. 7 8 5 3. 6 2 5 3. 3 7 5 C7 D 2 8 P F 2 9 0 1 3 C7 D 2 8 P F 2 9 1 3 3 C7 D 2 8 P F 2 9 0 4 3 96 . 1 4 92 . 0 8 85 . 7 3 30 4. 0 3 5 3. 8 7 5 3. 6 2 5 C7 D 3 0 P F 2 9 0 1 3 C7 D 3 0 P F 2 9 1 3 3 C7 D 3 0 P F 2 9 0 4 3 10 2 . 4 9 98 . 4 3 92 . 0 8 31 4. 1 6 0 4. 0 0 0 3. 7 5 0 C7 D 3 1 P F 2 9 0 1 3 C7 D 3 1 P F 2 9 1 3 3 C7 D 3 1 P F 2 9 0 4 3 10 5 . 6 6 10 1 . 6 0 95 . 2 5 35 4. 6 6 0 4. 5 0 0 4. 2 5 0 C7 D 3 5 P F 2 9 0 1 3 C7 D 3 5 P F 2 9 1 3 3 C7 D 3 5 P F 2 9 0 4 3 11 8 . 3 6 11 4 . 3 0 10 7 . 9 5 36 4. 7 8 5 4. 6 2 5 4. 3 7 5 C7 D 3 6 P F 2 9 0 1 3 C7 D 3 6 P F 2 9 1 3 3 C7 D 3 6 P F 2 9 0 4 3 12 1 . 5 4 11 7 . 4 8 11 1 . 1 3 40 5. 2 8 5 5. 1 2 5 4. 8 7 5 C7 D 4 0 P F 2 9 0 1 3 C7 D 4 0 P F 2 9 1 3 3 C7 D 4 0 P F 2 9 0 4 3 13 4 . 2 4 13 0 . 1 8 12 3 . 8 3 43 5. 6 6 0 5. 5 0 0 5. 2 5 0 C7 D 4 3 P F 2 9 0 1 3 C7 D 4 3 P F 2 9 1 3 3 C7 D 4 3 P F 2 9 0 4 3 14 3 . 7 6 13 9 . 7 0 13 3 . 3 5 50 6. 5 3 5 6. 3 7 5 6. 1 2 5 C7 D 5 0 P F 2 9 0 1 3 C7 D 5 0 P F 2 9 1 3 3 C7 D 5 0 P F 2 9 0 4 3 16 5 . 9 9 16 1 . 9 3 15 5 . 5 8 NOTE: Optional stacking designs are available (consult Tyco Electronics). 144 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .156 x .200 [3.18 x 5.08] Centerline without Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 Accepts .054 to .071Thk. PC Board nCertified [1.37 to 1.80] by Canadian Standards Association, . 1 2 0±. 0 0 3 [3.05±.25] File No. LR49571 Point of Card Slot .300[7.62] Contact Depth .350[8.89] .415[10.54] Physical Properties: Insulation Resistance— 5000 megohms minimum. Contact Retention Into PCB— 5 lbs. [356 N] J Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. .200 [5.08] Insulator Body—Glass filled thermoplastic, UL rating 94V-O Color—Black A Contacts—High strength copper alloy. B Contact Plating—.000050 [0.00127] nickel underplate with .000030 C [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .[0.5210] Contact Gap .365 Electrical Properties: [9.27] Ref. Operating Voltage—1500 VDC (sea level) .156 Current Rating—3 Amperes [3.96] Initial Contact Resistance— 10 milliohms Environmental Properties: .550 [13.97] Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 J Vibration— MIL-STD-202, method 204 Application Tooling: [3.1.9566] .[0.6245] Sq. Typ. Insertion Tool—page 150 Related Product Data: C Daughter Card Edge Pattern— page 57 Dim C .040±.003 [1.02±.08] Dia. .200 [5.08] .156 Note: Open ends and open/closed [3.96] ends are available. Consult Tyco E l e c t r o n i c s . 145 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .156 [3.18] Centerline/.200 [5.08] Row-to-Row without Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.84] Card Slot Depth .415 [10.54] Card Slot Depth .670 [17.02] Tail Length (DIM “J”) 6 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 P F 2 9 0 3 2 C6 D 0 6 P F 2 9 1 4 2 C6 D 0 6 P F 2 9 0 2 2 31 . 0 1 27 . 9 4 19 . 8 1 10 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 P F 2 9 0 3 2 C6 D 1 0 P F 2 9 1 4 2 C6 D 1 0 P F 2 9 0 2 2 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 P F 2 9 0 3 2 C6 D 1 2 P F 2 9 1 4 2 C6 D 1 2 P F 2 9 0 2 2 54 . 7 9 51 . 7 1 43 . 5 9 15 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 P F 2 9 0 3 2 C6 D 1 5 P F 2 9 1 4 2 C6 D 1 5 P F 2 9 0 2 2 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 P F 2 9 0 3 2 C6 D 1 8 P F 2 9 1 4 2 C6 D 1 8 P F 2 9 0 2 2 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 P F 2 9 0 3 2 C6 D 2 0 P F 2 9 1 4 2 C6 D 2 0 P F 2 9 0 2 2 86 . 4 9 83 . 4 1 75 . 2 9 22 3. 7 1 7 3. 5 9 6 3. 2 7 6 C6 D 2 2 P F 2 9 0 3 2 C6 D 2 2 P F 2 9 1 4 2 C6 D 2 2 P F 2 9 0 2 2 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 P F 2 9 0 3 2 C6 D 2 5 P F 2 9 1 4 2 C6 D 2 5 P F 2 9 0 2 2 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 P F 2 9 0 3 2 C6 D 2 8 P F 2 9 1 4 2 C6 D 2 8 P F 2 9 0 2 2 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 P F 2 9 0 3 2 C6 D 3 0 P F 2 9 1 4 2 C6 D 3 0 P F 2 9 0 2 2 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 P F 2 9 0 3 2 C6 D 3 1 P F 2 9 1 4 2 C6 D 3 1 P F 2 9 0 2 2 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 P F 2 9 0 3 2 C6 D 3 5 P F 2 9 1 4 2 C6 D 3 5 P F 2 9 0 2 2 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 P F 2 9 0 3 2 C6 D 3 6 P F 2 9 1 4 2 C6 D 3 6 P F 2 9 0 2 2 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 P F 2 9 0 3 2 C6 D 4 0 P F 2 9 1 4 2 C6 D 4 0 P F 2 9 0 2 2 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 P F 2 9 0 3 2 C6 D 4 3 P F 2 9 1 4 2 C6 D 4 3 P F 2 9 0 2 2 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 .180 [4.57] Tail Length (DIM “J”) 6 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 P F 2 9 0 3 3 C6 D 0 6 P F 2 9 1 4 3 C6 D 0 6 P F 2 9 0 2 3 31 . 0 1 27 . 9 4 19 . 8 1 10 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 P F 2 9 0 3 3 C6 D 1 0 P F 2 9 1 4 3 C6 D 1 0 P F 2 9 0 2 3 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 P F 2 9 0 3 3 C6 D 1 2 P F 2 9 1 4 3 C6 D 1 2 P F 2 9 0 2 3 54 . 7 9 51 . 7 1 43 . 5 9 15 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 P F 2 9 0 3 3 C6 D 1 5 P F 2 9 1 4 3 C6 D 1 5 P F 2 9 0 2 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 P F 2 9 0 3 3 C6 D 1 8 P F 2 9 1 4 3 C6 D 1 8 P F 2 9 0 2 3 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 P F 2 9 0 3 3 C6 D 2 0 P F 2 9 1 4 3 C6 D 2 0 P F 2 9 0 2 3 86 . 4 9 83 . 4 1 75 . 2 9 22 3. 7 1 7 3. 5 9 6 3. 2 7 6 C6 D 2 2 P F 2 9 0 3 3 C6 D 2 2 P F 2 9 1 4 3 C6 D 2 2 P F 2 9 0 2 3 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 P F 2 9 0 3 3 C6 D 2 5 P F 2 9 1 4 3 C6 D 2 5 P F 2 9 0 2 3 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 P F 2 9 0 3 3 C6 D 2 8 P F 2 9 1 4 3 C6 D 2 8 P F 2 9 0 2 3 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 P F 2 9 0 3 3 C6 D 3 0 P F 2 9 1 4 3 C6 D 3 0 P F 2 9 0 2 3 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 P F 2 9 0 3 3 C6 D 3 1 P F 2 9 1 4 3 C6 D 3 1 P F 2 9 0 2 3 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 P F 2 9 0 3 3 C6 D 3 5 P F 2 9 1 4 3 C6 D 3 5 P F 2 9 0 2 3 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 P F 2 9 0 3 3 C6 D 3 6 P F 2 9 1 4 3 C6 D 3 6 P F 2 9 0 2 3 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 P F 2 9 0 3 3 C6 D 4 0 P F 2 9 1 4 3 C6 D 4 0 P F 2 9 0 2 3 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 P F 2 9 0 3 3 C6 D 4 3 P F 2 9 1 4 3 C6 D 4 3 P F 2 9 0 2 3 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 146 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) .156 x .200 [3.18 x 5.08] Centerline with Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 Accepts .054 to .071 Thk. PC Board [1.37 to 1.80] nCertified by Canadian Standards . 1 2 0±. 0 0 3 Association, [3P.0o5in±t. 2o5f] Card Slot .300[7.62] File No. LR49571 Contact Depth .350[8.89] .415[10.54] Physical Properties: Insulation Resistance— 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] J Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel .200 blade. [5.08] Insulator Body—Glass filled thermoplastic, UL rating 94V-O A Color—Black B Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] C nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] .020 minimum [.51] Contact Gap .365 [9.27] Ref. Electrical Properties: Operating Voltage—1500 VDC .156 (sea level) [3.96] Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms Environmental Properties: .610 [15.49] Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 J Vibration— MIL-STD-202, method 204 .156 .025Sq. Typ. Application Tooling: [3.96] [.64] Insertion Tool—page 150 C Related Product Data: Daughter Card Edge Pattern— page 57 .040±.003 Dim C [1.02±.08] Dia. .200 [5.08] .156 Note: Open ends and open/closed [3.96] ends are available. Consult Tyco E l e c t r o n i c s . 147 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .156 [3.18] Centerline/.200 [5.08] Row-to-Row with Standoffs No. of Dual Di m e n s i o n s Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth .670 [17.02] Tail Length (DIM “J”) 6 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 P F 2 9 0 1 2 C6 D 0 6 P F 2 9 1 3 2 C6 D 0 6 P F 2 9 0 4 2 31 . 0 1 27 . 9 4 19 . 8 1 10 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 P F 2 9 0 1 2 C6 D 1 0 P F 2 9 1 3 2 C6 D 1 0 P F 2 9 0 4 2 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 P F 2 9 0 1 2 C6 D 1 2 P F 2 9 1 3 2 C6 D 1 2 P F 2 9 0 4 2 54 . 7 9 51 . 7 1 43 . 5 9 15 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 P F 2 9 0 1 2 C6 D 1 5 P F 2 9 1 3 2 C6 D 1 5 P F 2 9 0 4 2 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 P F 2 9 0 1 2 C6 D 1 8 P F 2 9 1 3 2 C6 D 1 8 P F 2 9 0 4 2 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 P F 2 9 0 1 2 C6 D 2 0 P F 2 9 1 3 2 C6 D 2 0 P F 2 9 0 4 2 86 . 4 9 83 . 4 1 75 . 2 9 22 3. 7 1 7 3. 5 9 6 3. 2 7 6 C6 D 2 2 P F 2 9 0 1 2 C6 D 2 2 P F 2 9 1 3 2 C6 D 2 2 P F 2 9 0 4 2 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 P F 2 9 0 1 2 C6 D 2 5 P F 2 9 1 3 2 C6 D 2 5 P F 2 9 0 4 2 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 P F 2 9 0 1 2 C6 D 2 8 P F 2 9 1 3 2 C6 D 2 8 P F 2 9 0 4 2 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 P F 2 9 0 1 2 C6 D 3 0 P F 2 9 1 3 2 C6 D 3 0 P F 2 9 0 4 2 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 P F 2 9 0 1 2 C6 D 3 1 P F 2 9 1 3 2 C6 D 3 1 P F 2 9 0 4 2 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 P F 2 9 0 1 2 C6 D 3 5 P F 2 9 1 3 2 C6 D 3 5 P F 2 9 0 4 2 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 P F 2 9 0 1 2 C6 D 3 6 P F 2 9 1 3 2 C6 D 3 6 P F 2 9 0 4 2 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 P F 2 9 0 1 2 C6 D 4 0 P F 2 9 1 3 2 C6 D 4 0 P F 2 9 0 4 2 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 P F 2 9 0 1 2 C6 D 4 3 P F 2 9 1 3 2 C6 D 4 3 P F 2 9 0 4 2 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 .180 [4.57] Tail Length (DIM “J”) 6 1. 2 2 1 1. 1 0 0 0. 7 8 0 C6 D 0 6 P F 2 9 0 1 3 C6 D 0 6 P F 2 9 1 3 3 C6 D 0 6 P F 2 9 0 4 3 31 . 0 1 27 . 9 4 19 . 8 1 10 1. 8 4 5 1. 7 2 4 1. 4 0 4 C6 D 1 0 P F 2 9 0 1 3 C6 D 1 0 P F 2 9 1 3 3 C6 D 1 0 P F 2 9 0 4 3 46 . 8 6 43 . 7 9 35 . 6 6 12 2. 1 5 7 2. 0 3 6 1. 7 1 6 C6 D 1 2 P F 2 9 0 1 3 C6 D 1 2 P F 2 9 1 3 3 C6 D 1 2 P F 2 9 0 4 3 54 . 7 9 51 . 7 1 43 . 5 9 15 2. 6 2 5 2. 5 0 4 2. 1 8 4 C6 D 1 5 P F 2 9 0 1 3 C6 D 1 5 P F 2 9 1 3 3 C6 D 1 5 P F 2 9 0 4 3 66 . 6 8 63 . 6 0 55 . 4 7 18 3. 0 9 3 2. 9 7 2 2. 6 5 2 C6 D 1 8 P F 2 9 0 1 3 C6 D 1 8 P F 2 9 1 3 3 C6 D 1 8 P F 2 9 0 4 3 78 . 5 6 75 . 4 9 67 . 3 6 20 3. 4 0 5 3. 2 8 4 2. 9 6 4 C6 D 2 0 P F 2 9 0 1 3 C6 D 2 0 P F 2 9 1 3 3 C6 D 2 0 P F 2 9 0 4 3 86 . 4 9 83 . 4 1 75 . 2 9 22 3. 7 1 7 3. 5 9 6 3. 2 7 6 C6 D 2 2 P F 2 9 0 1 3 C6 D 2 2 P F 2 9 1 3 3 C6 D 2 2 P F 2 9 0 4 3 94 . 4 1 91 . 3 4 83 . 2 1 25 4. 1 8 5 4. 0 6 4 3. 7 4 4 C6 D 2 5 P F 2 9 0 1 3 C6 D 2 5 P F 2 9 1 3 3 C6 D 2 5 P F 2 9 0 4 3 10 6 . 3 0 10 3 . 2 3 95 . 1 0 28 4. 6 5 3 4. 5 3 2 4. 2 1 2 C6 D 2 8 P F 2 9 0 1 3 C6 D 2 8 P F 2 9 1 3 3 C6 D 2 8 P F 2 9 0 4 3 11 8 . 1 9 11 5 . 1 1 10 6 . 9 8 30 4. 9 6 5 4. 8 4 4 4. 5 2 4 C6 D 3 0 P F 2 9 0 1 3 C6 D 3 0 P F 2 9 1 3 3 C6 D 3 0 P F 2 9 0 4 3 12 6 . 1 1 12 3 . 0 4 11 4 . 9 1 31 5. 1 2 1 5. 0 0 0 4. 6 8 0 C6 D 3 1 P F 2 9 0 1 3 C6 D 3 1 P F 2 9 1 3 3 C6 D 3 1 P F 2 9 0 4 3 13 0 . 0 7 12 7 . 0 0 11 8 . 8 7 35 5. 7 4 5 5. 6 2 4 5. 3 0 4 C6 D 3 5 P F 2 9 0 1 3 C6 D 3 5 P F 2 9 1 3 3 C6 D 3 5 P F 2 9 0 4 3 14 5 . 9 2 14 2 . 8 5 13 4 . 7 2 36 5. 9 0 1 5. 7 8 0 5. 4 6 0 C6 D 3 6 P F 2 9 0 1 3 C6 D 3 6 P F 2 9 1 3 3 C6 D 3 6 P F 2 9 0 4 3 14 9 . 8 9 14 6 . 8 1 13 8 . 6 8 40 6. 5 2 5 6. 4 0 4 6. 0 8 5 C6 D 4 0 P F 2 9 0 1 3 C6 D 4 0 P F 2 9 1 3 3 C6 D 4 0 P F 2 9 0 4 3 16 5 . 7 4 16 2 . 6 6 15 4 . 5 6 43 6. 9 9 3 6. 8 7 2 6. 5 5 2 C6 D 4 3 P F 2 9 0 1 3 C6 D 4 3 P F 2 9 1 3 3 C6 D 4 3 P F 2 9 0 4 3 17 7 . 6 2 17 4 . 5 5 16 6 . 4 2 148 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Press-Fit Application Tooling Tyco Electronics offers a BMEP 1K/2K Servo Electric complete line of servo-elec- Press tric driven presses for the • 1000 or 2000 lb force [4.5 application of press-fit con- or 9 kN] nectors. Each system fea- tures a PC controlled servo • 12” [305 mm] throat depth electric drive for precise • Compact footprint – 16” x application and monitoring 24” [406 x 610 mm] of force, speed, and press height. The entire process • Force resolution of is data driven to provide approximately 1 lb [4.4 N] flexible programming and for delicate press applica- automatic set-up. SPC tions. analysis is provided for each connector pressed to assure the quality of every application. BMEP 3T/5T Benchtop Electric Servo Press • 3 or 5 tons force [27 or 44 kN] • 18” x 24” [460 x 610 mm] PCB capacity • Compact footprint – 24” x 48” [610 x 1220 mm] • Midrange force and board size capacity in a bench- top unit. MEP 6T/12 T Manual Electric Servo Press • 6 or 12 tons force [53 or 107 kN] • 24” x 36” [610 x 914 mm] PCB capacity • Self-contained, portable unit • Compact, manual unit capable of handling large boards and high force applications. Automatic Pick, Place and Press (AP3) • 8 tons force [71 kN] • 18” x 30” [457 x 762 mm] PCB capacity • SMEMA compatible unit for automatic pick, place and press of connectors and odd-from compo- nents. • Vision system for pin inspection prior to place- ment. 149 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Press-Fit Card Edge Insertion Tools Ordering Information Tool Part Replacement Blade Center-to Connector Max. No. Of Number Part Number Center Prefix Positions Acquired P/N TYCO Acquired P/N Tyco .100 x .100 C1 70 98336 3-1437266-5 98293 1437274-1 2.54 x 2.54 .100 x .100 2.54 x 2.54 C1 100 98341 — 98293 1437274-1 .156 x .200 3.96 x 5.08 C6 43 98231 1-1437266-1 98206 1437266-8 .125 x .250 3.18 x 6.35 C7 50 98230 1-1437266-0 98206 1437266-8 .100 x .200 2.54 x 5.08 C8 70 98224 1-1437266-9 98206 1437266-8 .100 x .200 2.54 x 5.08 W8 70 98236 1-1490560-1 98238 1490563-1 (Full Scoop) .100 x .200 2.54 x 5.08 W8 35 98236 1-1490560-2 98238 1490563-1 (Full Scoop) 150 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Press-Fit Card Edge Removal Tool Kits Description Removal tool kits include: impact tools, removal tips for tail lengths ranging from .180 in. [4.57] to .680 in. [17.27] Kits for .100" x .200" [2.54 x 5.08] Series Card Edge connectors include the insertion tip. Ordering Information Acquired Tyco Center x Row Prefix Kit Number Kit Number .156 x .200 3.96 x 5.08 C6 9818002 1437266-3 .125 x .250 3.18 x 6.35 C7 9818002 1437266-3 .100 x .200 2.54 x 5.08 C8 9818002 1437266-3 .100 x .100 2.54 x 2.54 C1 9818004 1437266-4 .100 x .200 2.54 x 5.08 W8 9818005 1437266-5 Wide Full Scoop Ordering Information It e m Applies to Kit No. Re p l a c e m e n t Ty c o De s c r i p t i o n Pa r t Pa r t No . 98 1 8 0 0 1 98 1 8 0 0 1 98 1 8 0 0 3 98 1 8 0 0 4 98 1 8 0 0 5 Nu m b e r Nu m b e r 1 Impact Tool (cid:214) (cid:214) (cid:214) (cid:214) (cid:214) 98 2 0 4 0 1 14 3 7 2 6 6 - 7 2 Removal Tip - .180 [4.57] Tail (cid:214) (cid:214) (cid:214) (cid:214) (cid:214) 98 2 0 3 0 1 14 3 7 2 6 6 - 6 3 Removal Tip -9 .3 . 6 7 0 8 / /1 . 4 2 7 . 0 5 7 Ta i l (cid:214) (cid:214) (cid:214) (cid:214) 98 2 0 3 0 2 14 3 7 2 6 0 - 4 4 Removal Tip 1- 7 .6 . 0 7 2 0 / / 1 . 6 7 8 . 2 0 7 Ta i l (cid:214) (cid:214) (cid:214) (cid:214) 98 2 0 3 0 3 — 6 Insertion Tip - C6, 7 & 8 PF (cid:214) 98 3 6 7 0 1 3- 1 4 3 7 2 6 6 - 9 10 Removal Tip -1 .3 5 . 5 9 0 7 / / . 1 6 5 2 . 5 8 8 Ta i l (cid:214) 98 2 0 3 0 5 14 3 7 2 6 0 - 5 11 Insertion Tip - C1 Series PF (cid:214) 98 3 6 3 0 1 14 3 7 2 6 0 - 6 12 Insertion Tip - W8 Series PF (cid:214) 98 3 6 7 0 2 14 3 7 2 6 0 - 7 151 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Wire-to-Board Connectors Except for DUO-TYNE flag Crimp Snap Twin Leaf High Current Connectors DUO-TYNE Flag Connectors connectors, which are Connectors (Pages 173-176) (Pages 177-180) exclusively for wire-to-board (Pages 154-163) Designed for a current These economical connec- application, the connectors These connectors are capability of up to 30 tors are designed to meet presented in this section designed for high density amperes, these connectors the quality and reliability are primarily wire-to-board wire-to-board applications are an economical answer requirements of industries connectors, but do have and feature bifurcated, to the costly problem of such as appliance controls, some board-to-board capa- crimp and solder eyelet interconnecting high current vending machine subasem- bilities. These connectors contacts on .100 [2.54] and printed circuitry. Styles are blies, television, stereo, are available in a wide .125 [3.18] centers. Design available for wire-to-board business machines and range of styles to suit flexibility allows the cus- and board-to-board appli- other areas with similar con- almost any wire-to-board tomer to save by purchas- cations. Contacts are on trol needs. The right-angle application. This versatile ing only enough contacts .312 [7.92] centers. design of the connector connector family features for his circuit design permits close-quarter snap-in contacts of various requirements. Contact cabling. Contacts are configurations including styles include crimp, solder doubly locked in when crimp, post, eyelet and eyelet and vertical and a PC board is inserted. solder types. right-angle posts, in a variety of sizes. Wire-to-board crimp, snap-in contacts are easily AMP-LEAF Connectors inserted into the connector (Pages 164-172) housing and are furnished These connectors are for in reel-fed strip form for single- or double-sided automatic machine applica- printed circuit boards. tion and loose piece for Snap-in contacts lock in hand tool termination. The place on .156 [3.96] cen- Wire-to-Board Printed ters, maintaining constant Circuit Board Connector pressure on circuit paths. family includes: Contact options are avail- able for precision crimped terminations and solder dip applications. 152 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Wire-to-Board Connector Selection Guide Crimp Snap AMP-LEAF Twin Leaf Connectors Connectors (Pages 154-163) (Pages 164-172) .175 .350[8.89] .340[8.64] [4.45] .437[11.10] .350[8.89] .360[9.14] .087 .375[9.53] [2.21] .437[11.10] .485[12.32] .750 .700 [19.05] [17.78] .405 .375 [10.29] [9.53] Centerlines .100 [2.54] X .125 [3.18] X .156 [3.96] X X .197 [5.00] .260 [6.60] .312 [7.92] Styles Crimp X X Right-Angle Post X X Wrap-Type Post X X Solder Eyelet X X Solder Tail X X Double Sided X X Single Sided X X High Current DUO-TYNE Flag Connectors Connectors (Pages 173-176) (Pages 177-180) .437 [11.10] .578 [14.68] .375 .200 [9.53] [5.08] .012 .967 [0.30] [24.56] .500 .567 [12.70] [14.40] .240 Centerlines [6.10] .100 [2.54] .125 [3.18] .156 [3.96] X .197 [5.00] .260 [6.60] .312 [7.92] X Styles Crimp X X Right-Angle Post Wrap-Type Post Solder Eyelet Solder Tail X Double Sided X X* Single Sided *Double-sided board; single readout. 153 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors Product Facts n Crimp snap-in, solder eye- let, .025 [0.64] square posted and right angle contacts on .100 [2.54], .125 [3.18] or .156 [3.96] centers n Customer buys only enough contacts to meet circuit and retention requirements n Contacts bifurcated for redundancy n Single leaf version avail- able for higher contact normal forces n Low insertion forces n Accommodates AWG 16-28 [1.4-0.08 mm2] wire range and insulation diameters .035-.105 [0.89-2.67] n Large variety of connector sizes n Cavity identification on face of card slot and wire entry n High speed automatic machine terminations provide uniform reliability at lowest applied cost n Recognized under the Component Program of The Crimp Snap Twin Leaf Design flexibility allows the Performance Specifications Underwriters Connector is designed customer to save by pur- Contact Rating*:5 amperes, Laboratories Inc. especially for high density chasing only enough continuous 3 amperes, max. (for .025 File No. E28476 wire-to-board applications. contacts for the circuit [0.64] posted contacts) Termination styles include requirements. Easy replace- n Certified by Canadian Contact Resistance: crimp, solder, posted and ability of each contact cuts Standards 10 milliohms, max. right angle, in a variety of repair cost in the event of Association Insulation Resistance: si z e s . contact or wire damage. File No. LR 7189 5000 megohms (initial) 1000 megohms Voltage Rating: .100 [2.54] Centerline-1000 Vrms .125 [3.18] Centerline-1500 Vrms .156 [3.96] Centerline-1800 Vrms Insertion Force (per pair):Twin Leaf-10 oz. [2.78 N], max.; 7.6 oz. [2.11 N], avg. Non-Bifurcated Contacts- 20 oz. [5.57 N], max. Extraction Force (per pair):Twin Leaf-0.7 oz. [0.195 N], min.; 1.2 oz. [0.334 N], avg. Operating Temperature: -55°C to +105°C *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 154 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors (Continued) Crimp, Snap-In Contacts .104 .060 .705 [2.64] [1.52] [17.91] Material and Finish: Phosphor bronze, plated .000030 [0.00076] nickel on entire contact, with .705 the addition of one of the following [17.91] .030 platings: [0.76] Plating A—.000030 [0.00076] gold in Co n n e c t o r Wire Size In s u l a t i o n Co n t a c t Contact Part Numbers Applicator for Applicator for Co l o r Ha n d mating area Ra n g e Fi n i s h AM P - O - L E C T R I C St r i p p e r / C r i m p e r Plating B—.000015 [0.00038] gold in Ce n t e r l i n e AW G / m m 2 Dia. Range (P l a t i n g ) Loose Piece Strip Form Ma c h i n e * Ma c h i n e Co d e To o l mating area A 583616-4 583616-2 28-24 .035-.055 B 583616-5 583616-3 Plating C—.000050 [0.00127] gold in 466577-4 466912-1 Orange 90268-1 0.08-0.2 0.89-1.40 C 583616-9 583616-8 mating area, with gold flash on remain- .100 D 1-583616-1 1-583616-0 der of contact 2.54 A 583853-5 583853-3 Plating D—.000015 [0.00038] gold in 24-20 .048-.060 B 583853-4 583853-2 466622-2 466919-1 Green 91535-1 mating area, with gold flash on remain- 0.2-0.6 1.22-1.52 C 583853-9 583853-8 D 1-583853-1 1-583853-0 der of contact A 583616-4 583616-2 Note: Tin plating is available upon 28-24 .035-.055 B 583616-5 583616-3 request. 0.08-0.2 0.89-1.40 C 583616-9 583616-8 466577-4 466912-1 Orange 90268-1 D 1-583853-1 1-583853-0 A 583853-5 583853-3 Related Product Data: 24-20 .048-.060 B 583853-4 583853-2 466622-2 466919-1 Green 91535-1 .125 0.2-0.6 1.22-1.52 C 583853-9 583853-8 Performance Specifications— 3.18 D 1-583853-1 1-583853-0 page 154 A 583649-6 583649-3 22-18 .049-.095 B 583649-5 583649-2 466713-2 466928-1 Violet 90264-1 Application Tooling—pages 184,185 0.3-0.9 1.24-2.41 C 583649-7 583649-4 Connector Housings—pages 157, 20-16 .073-.090 A 583875-6 583875-5 687775-2 — White 90285-1 159, 161 0.6-1.4 1.85-2.29 C 583875-3 583875-2 A 583616-4 583616-2 28-24 .035-.055 B 583616-5 583616-3 466577-4 466912-1 Orange 90268-1 Technical Documents: 0.08-0.2 0.89-1.40 C 583616-9 583616-8 D 1-583616-1 1-583616-0 (pages 186, 187): A 583853-5 583853-3 Product Specification 24-20 .048-.060 B 583853-4 583853-2 466622-2 466919-1 Green 91535-1 0.2-0.6 1.22-1.52 C 583853-9 583853-8 108-9031 .156 D 1-583853-1 1-583853-0 Application Specification 3.96 A 583649-6 583649-3 22-18 .049-.095 114-9004 B 583649-5 583649-2 466713-2 466928-1 Violet 90264-1 0.3-0.9 1.24-2.41 C 583649-7 583649-4 Instruction Sheets .073-.090 A 583875-6 583875-5 408-7527, 408-7529, 408-7531, 687775-2 — 408-7551, 408-7556, 408-7583 02.06--116.4 .10.8855--2.1.2095 C 583875-3 583875-2 White 90285-1 B 583875-3 — — — Note:Only loose piece contacts 2.16-2.67 vvv manufactured and supplied by Tyco Electronics are to be used with the .104 hand tools listed on this page. No .705 [2.64] attempt should be made to produce [1.0.5620] [17.91] loose piece parts from a strip since special cutoff tooling is required to assure a properly functioning part. .705 [17.91] .030 [0.76] Crimp, Snap-In Contacts, Non-Bifurcated Co n n e c t o r WRira en Sg ie ze In s u l a t i o n CFo i nn it sa h c t Contact Part Numbers AM ApP p- lO ic- aL tE oC rT fR orI C St Ar i pp pp le icr a/ C tor i rm fop re r Co l o r Ha n d Ce n t e r l i n e AW G / m m 2 Dia. Range (P l a t i n g ) Loose Piece Strip Form Ma c h i n e * Ma c h i n e Co d e To o l 28-24 .035-.055 A 531476-5 531476-4 466577-4 466912-1 Orange 90268-1 Material and Finish: .100 0.08-0.2 0.89-1.40 2.54 24-20 .048-.060 A 531477-5 531477-4 Phosphor bronze, plated .000030 0.2-0.6 1.22-1.52 B 531477-4 531477-2 466622-2 466919-1 Green 91535-1 [0.00076] nickel on entire contact, with 28-24 .035-.055 the addition of one of the following 0.08-0.2 0.89-1.40 A 531476-5 531476-4 466577-4 466912-1 Orange 90268-1 platings: .125 24-20 .048-060 A 531477-5 531477-4 466622-2 466919-1 Green 91535-1 Plating A—.000030 [0.00076] gold in 3.18 0.2-0.6 1.22-1.52 B 531477-3 531477-2 mating area 22-18 .045-.095 A — 531478-4 466713-2 466928-1 Violet 90264-1 Plating B—.000015 [0.00038] gold in 0.3-0.9 1.14-2.41 mating area 28-24 .035-.055 A 531476-5 531476-4 466577-4 466912-1 Orange 90268-1 0.08-0.2 0.89-1.40 B 531477-5 — Note:Tin plating is available upon request. .156 24-20 .048-.060 A 531477-5 531477-4 466622-2 466919-1 Green 91535-1 3.96 0.2-0.6 1.22-1.52 B 531477-3 531477-2 22-18 .045-.095 A — 531478-4 466713-2 466928-1 Violet — Related Product Data: 0.3-0.9 1.14-2.41 (See above) *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. 155 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors (Continued) Snap-In Solder Eyelet Contacts Material and Finish: .060 [1.52] Phosphor bronze, plated .000030 [0.00076] nickel on entire contact, with the addition of one of the following platings: Plating A—.000030 [0.00076] gold in mating area Plating B—.000015 [0.00038] gold in mating area Solder eyelet portion is tin plated. .104 .030 [2.64] Note:Tin plating of entire contact is [0.76] available upon request. Related Product Data: Connector Contact Part Finish Centerline Numbers Performance Specifications— (Plating) page 154 .100 A 583854-3 2.54 B 583854-5 Connector Housings—pages 157, .125 159, 161 3.18 A 530245-3 Technical Documents (pages 186, 187): Product Specification 108-9031 Application Specification 114-9004 Instruction Sheets 408-7527, 408-7529 Snap-In Wrap Post Contacts .025 [0.64] Square Material and Finish: L Contact—Phosphor bronze, plated .000015 [0.00038] gold in mating area, with entire contact underplated .000030 [0.00076] nickel Connector Dimension Part Centerline Post—Phosphor bronze, tin-plated Spacing L Numbers Note:Tin plated contacts are avail- .451 583879-1 able upon request. .100 11.46 2.54 .535 583879-4 13.59 Related Product Data: .125 .525 583884-1 3.18 13.34 Performance Specifications— .156 .525 page 154 3.96 13.34 583884-1 Connector Housings—pages 157, 159, 161 Hand Tool Contact Extraction Tool Technical Documents: (pages 186, 187): Product Specification 108-9031 Application Specification 114-9004 Instruction Sheets 408-7527, 408-7529 156 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .100 [2.54] Centerline Ho u s i n g s With Mounting Ears Without Mounting Ears Fit for Fit for .128 .055-.070 .300 .055-.070 M94aV-tOe rriaateld: Black glass-filled polyester, [3D.i2a5.] [.21.0504] [2.1.5040] [P1C.4 B0-o1a.7rd8] [7.62] [.21.0504] [2.1.5040] [P1C.4 B0-o1a.7rd8] 2 Holes Related Product Data: Ppaegref o1r5m4ance Specifications— DA [.41.7455] [.83.5809] A [.83.5809] Contacts—pages 155, 156 Accessories—page 162* PCB Edge Pattern—page 163 BE [1.35.5907] B [1.04.0106] Technical Documents: .750 (pages 186, 187): .750 [19.05] [19.05] Product Specification .345 [8.76] 108-9031 Application Specification C .250 C 114-9004 [6.35] Instruction Sheet 408-7527 No. of Dimensions Part Numbers Dual Without With Positions A B C D E Mounting Ears Mounting Ears — — 2-583717-1 — .700 .900 .720 6 1.175 1.430 17.78 22.86 18.29 — 1-583861-5 29.85 36.32 .800 1.000 .820 7 — — 2-583717-3 — 20.32 25.4 20.83 .900 1.100 .920 8 — — 3-583717-9 — 22.86 27.94 23.36 1.700 2.100 583717-1 583718-1 1.100 1.300 1.120 43.18 53.34 1- 1- 10 27.94 33.02 28.49 1.575 1.830 — 583861-7 40.01 46.48 1- 1.200 1.400 1.600 13 — — 3-583717-3 — 30.48 35.56 40.64 1.500 1.700 1.520 14 — — 2-583717-7 — 38.1 43.16 38.61 2.200 2.600 583717-3 583718-3 1.600 1.800 1.620 55.88 66.04 1- 1- 15 40.64 45.72 41.15 2.075 2.330 — 583861-9 52.71 59.18 1- 1.800 2.000 1.820 2.400 2.800 17 1-583717-5 1-583861-1 45.72 50.8 46.30 60.96 71.12 1.900 2.100 1.920 18 — — 1-583717-7 — 48.26 53.34 48.76 2.100 2.300 2.120 20 — — 3-583717-1 — 53.34 58.42 53.84 2.300 2.500 2.320 2.900 3.300 22 583717-9 583718-9 58.42 63.50 58.93 73.66 83.82 1- 1- 25 2.600 2.800 2.620 3.200 3.600 1-583717-1 1-583718-1 66.04 71.12 66.55 81.28 91.44 3.700 4.100 1-583717-3 1-583718-3 3.100 3.300 3.120 93.98 104.14 30 78.74 83.82 79.25 3.575 3.830 — 583861-1 90.81 97.28 1- 3.300 3.500 3.320 3.900 4.300 32 — 2-583718-7 83.82 88.90 84.33 99.06 190.22 3.700 3.900 3.720 4.175 4.430 36 — 2-583861-5 93.98 93.06 94.49 106.04 112.52 4.700 5.100 — 1-583718-5 4.100 4.300 4 .120 119.38 129.54 40 104.14 109.22 104.65 4.575 4.830 — 583861-3 116.21 122.68 1- 5.700 6.100 1-583717-9 1-583718-7 5.100 5.300 5.120 144.78 154.94 50 129.54 134.62 130.05 5.575 5.830 — 2-583861-1 141.61 148.08 Note: Other connector sizes can be made available, consult Tyco Electronics. 157 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .100 [2.54] Centerline (Continued) Fit for Housings Preloaded with With Mounting Ears Without Mounting Ears .055-.070 Right-Angle Posts .350 A [P1.C4 0B-o1a.7r8d] A [8.89] .300 .128 Dia. [7.62] [3.25] Material and Finish: Typ. .350 Housing—Black glass-filled polyester, [8.89] 94V-O rated Contacts—Phosphor bronze, plated .000015 [0.00038] gold in mating area, [.21.0504] IKneteyrincogn Staloctt Typ. [2.1.5040] .100 Typ. with entire contact underplated .000030 .100 [2.54] Typ. [0.00076] nickel [2.54] Posts—Phosphor bronze, tin plated .750 B [19.05] B Related Product Data: .550 .345 .400 [13.97] [8.76] [10.16] Performance Specifications— .250 page 154 [6.35] Asccessories—page 162* .750 PCB Edge Pattern and Hole [19.05] Layout—page 163 .125 .170 [3.17] [4.32] G Technical Documents: .025 (pages 186, 187): [.064] C Square Post Product Specification C Tin-Plated 108-9031 F .150 E Min. [3.81] Application Specification 114-9004 D Instruction Sheet 408-7527 D E .128Dia. [3.25] (2 Plcs.) B C Connector Centerline Spacing .038Dia. Typ. A [0.97] Type I Type II Recommended PC Board Hole Layout Posted Assembly Part Numbers No. of Di m e n s i o n s Right-Angle Post Right-Angle Post DPo u s a . l A B C D E F G TWyipthe MIountinTgy pEea rIsI MouWnit t ih no gu Et ars 1.100 1.300 1.120 1.575 1.830 10 — — — 1-583900-5 — 27.94 33.02 28.49 40.01 46.48 1.800 2.000 1.820 .090 .150 17 — — — — 1-530218-5 45.72 50.80 46.23 2.29 3.81 2.300 2.500 2.320 2.900 3.300 .090 .150 22 — 1-583900-3 1-530218-9 58.42 63.50 58.93 73.66 83.82 2.29 3.81 2.600 2.800 2.620 3.200 3.600 .090 .150 25 583900-1 — 1-530218-1 66.04 71.12 66.55 81.28 91.44 2.29 3.81 2.900 3.100 2.920 3.375 3.630 .090 .150 28 — 2-583900-6 — 73.66 78.74 74.16 85.72 92.20 2.29 3.81 3.100 3.200 3.120 3.700 4.100 .090 .150 30 — 1-583900-4 1-530218-6 78.74 81.28 79.25 93.98 104.14 2.29 3.81 5.100 5.300 5.120 5.575 5.830 50 — — 583900-3 — — 129.54 134.62 130.05 141.61 148.08 Note:Other connector sizes can be made available, consult Tyco Electronics. 158 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .125 [3.18] Centerline Housings With Mounting Ears Without Mounting Ears Material: Black glass-filled polyester .125 94V-O rated [.312.22 8H5]o Dleisa. [3.18] [3.1.1285] [P1.0.C4F5 05iBt- -f1.oo0.ar77r80d] [.31.2158] [3.1.1285] [P1.0.C4F5 05iBt- -fo1.o0a.r77r80d] Related Product Data: Performance Specifications— .300 .437 .437 page 154 [7.62][11.10] [11.10] Contacts—pages 155, 156 Accessories—page 162 A [5.2.5148] A .300 PCB Edge Pattern—page 163 [7.62] D Technical Documents: (pages 186, 187): Product Specification 108-9031 Application Specification E 114-9004 B .550 B .455 Instruction Sheet 408-7527 [13.97] [11.56] .345 .345 [8.76] [8.76] .750 [19.05] .750 [19.05] C .250 C [6.35] No. of Dimensions Part Numbers Dual Without With A B C D E Positions Mounting Ears Mounting Ears .875 1.035 .845 1.295 1.555 6 583873-1 1-583864-1 22.23 26.29 21.46 32.89 39.50 1- 1.375 1.535 1.345 1.795 2.055 10 — 1-583864-3 34.93 38.99 34.16 45.59 52.20 2.000 2.160 1.970 2.420 2.680 15 583873-5 — 50.80 54.86 50.04 61.47 68.07 1- 2.875 3.035 2.845 3.295 3.555 22 583873-9 1-583864-9 73.03 77.09 72.26 83.69 90.30 1- 3.250 3.410 3.220 3.670 3.930 25 — — 82.55 86.61 81.79 93.22 99.82 3.625 3.785 3.595 4.045 4.305 28 — 1-583864-3 92.08 96.14 91.31 102.74 109.35 3.875 4.035 3.845 4.295 4.555 30 — 2-583864-1 98.43 102.49 47.66 109.09 115.70 5.125 5.285 5.095 5.545 5.805 40 — 1-583864-7 130.17 134.23 129.41 140.84 147.44 5.625 5.785 5.595 6.045 6.305 44 1-583873-9 — 142.88 146.94 142.11 153.54 160.15 Note: Other connector sizes can be made available, consult Tyco Electronics. 159 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .125 [3.18] Centerline (Continued) Housings Preloaded with With Mounting Ears Right-Angle Posts Fit for .055-.070 [1.40-1.78] Material and Finish: PC Board 3.875 Housing—Black glass-filled .125 [98.43] .128 Dia. [3.18] [3.25] polyester, 94V-O rated Typ. Contacts—Phosphor bronze, plated .437±.007 .000030 [0.00076] gold in mating area, [11.10±0.18] with entire contact underplated .000030 [0.00076] nickel .300 Posts—Phosphor bronze, tin-plated [7.62] Related Product Data: .550 Performance Specifications— [13.97] page 154 .128Dia. [3.25] .345 Accessories—page 162 .750 [8.76] PCB Edge Pattern and Hole [19.05] .100 Layout—page 163 .170 [2.54] .125 [4.32] [3.18] .025 .250 [0.64] [6.35] Square Post 4.035 Tin-Plated .150 Technical Documents: [102.49] [3.81] (pages 186, 187): .180 Min. [4.57] Product Specification 108-9031 Application Specification 114-9004 4.555 Instruction Sheet 408-7527 [115.70] 4.295 [109.09] .125Typ. [3.18] 3.845 [97.66] 30 Dual Positions, Part No. 530238-8 160 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .156 [3.96] Centerline Housings With Mounting Ears Material: Black glass-filled poly- ester, 94V-O rated Fit for .055 - .070 .128Dia. Related Product Data: .160 .156 [1.40-1.78] [3.25] [4.06] [3.96] PC Board 2 Holes Performance Specifications— page 154 .325 .437 Contacts—pages 155, 156 [8.26][11.10] Accessories—page 162 PCB Edge Pattern—page 163 A .162 [4.11] D Technical Documents: (pages 186, 187): Product Specification 108-9031 .345 [8.76] E Application Specification B 114-9004 Instruction Sheet 408-7527 .455 [11.56] .750 [19.05] .250 [6.35] C No. of Dimensions Part Numbers Dual Mounting Positions A B C D E Ears 1.100 1.264 .976 1.535 1.785 6 1-583859-3 27.94 32.11 24.79 38.99 45.34 1.412 1.576 1.288 1.847 2.097 8 2-583859-1 35.86 40.03 32.72 46.91 53.26 1.724 1.888 1.600 2.159 2.409 10 1-583859-9 43.79 47.96 40.64 54.84 61.19 2.036 2.200 1.912 2.471 2.721 12 1-583859-5 51.71 55.88 48.56 62.76 69.11 2.504 2.668 2.380 2.939 3.189 15 1-583859-7 63.60 67.77 60.45 74.65 81.00 2.972 3.136 2.848 3.407 3.657 18 1-583859-5 75.49 79.55 72.34 86.54 92.89 3.596 3.760 3.472 4.031 4.281 22 1-583859-3 91.34 95.50 88.19 102.39 108.74 4.532 4.696 4.408 4.967 5.217 28 1-583859-1 115.11 119.28 111.96 126.16 132.51 5.780 5.944 5.656 6.215 6.465 36 2-583859-3 146.81 150.96 143.66 157.86 164.21 Note: Other connector sizes can be made available, consult Tyco Electronics. 161 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Accessories for Crimp Snap Twin Leaf Connectors Dummy Contacts Related Product Data: Material: Phosphor bronze The dummy contact is used in sparsely loaded housings to balance contact pressure. For specific recommendations, consult Tyco Electronincs. Tin Plated — Part No. 583857-5 Technical Documents .000030 [0.00076] Nickel Plated — Part No. 583857-6 Gold Flash-Over-Nickel Plate— Part No. 583857-7 (pages 186, 187): Instruction Sheet 408-7527 Retaining Spring Related Product Data: Material: Stainless steel Retaining springs are used for single sided PC board applications. Use one spring per 6 empty cavities. Technical Documents Unplated— Part No. 583691-2 (pages 186, 187): Gold Flash-Over-Nickel Plate— Part No. 583691-3 Instruction Sheet 408-7527 Keying Plugs Technical Documents (pages 186, 187): Instruction Sheet 408-7527 On-Contact Plug Intercontact Plug Natural Nylon— Part No. 583764-1 Natural Nylon— Part No. 583274-1 Glass-Filled Polyester— Part No. 583274-3 Locking Key Material: Nylon On-Contact Clip Part No. 530213-1 Mounting Block Kit Part No. 531250-4 .062 Dia. [1.57] Each kit includes 2 mounting blocks Material: Natural color nylon 2 self tapping screws, Roll Pin Card Extender #5 x .437 [11.10] Co n n e c t o r 2 roll pins Housing Ref. #5 Self Tapping .075 x .250 [1.57 x 6.35] Screws Mounting Block .062 [1.57] PC Board Ref. 162 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors (Continued) Recommended PC Board Edge Pattern Hole for Locking Key .420 [10.67] .078 [1.98] .062 [1.57] 45°Chamfer B .015 Min. [0.38] A 45°Chamfer Connector Dimensions Centerline Spacing A B .100 .093 .052 2.54 2.36 1.32 .125 .118 .078 3.18 3.00 1.98 .156 .153 .094 3.96 3.89 2.39 Recommended PC Board Hole Layout D E .128Dia. [3.25] (2 Plcs.) C B Connector Centerline Spacing .038Dia. Typ. A [0.97] Connector Centerline Spacing: .100 [2.54] No. of Dimensions Dual Positions A B C D E .900 .625 .475 1.575 .400 10 22.86 15.88 12.07 40.01 10.16 1.600 17 — — — — 40.64 1.900 .625 .375 2.575 .337 20 48.26 15.88 9.53 65.41 8.56 2.100 .625 4.75 2.900 .337 22 53.34 15.88 12.07 73.66 8.56 2.400 .625 .475 3.200 .400 25 60.96 15.88 12.07 81.28 10.16 2.900 3.700 .400 30 — — 73.66 93.98 10.16 4.900 .525 .375 5.575 .337 50 124.46 13.34 9.53 141.61 8.56 Connector Centerline Spacing: .125 [3.18] No. of Dimensions Dual Positions A B C D E 3.625 4.295 .350 30 — — 92.08 109.09 8.89 163 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors Product Facts n Contacts on .156 [3.96] centers n Glass-filled polyester, phenolic or diallyl phthalate housings n Closed card entry design helps prevent overstressing of contacts n Gold-over-nickel plated contacts n Locking lance permits easy contact replacement n Keying n Contacts maintain exact pressures on the circuit paths, despite repeated insertions and extractions n Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 n Certified by Canadian Standards Association**, File No. LR 7189 **CSA certification pending for certain products, as noted. AMP-LEAF Connectors are Right-angle posted connec- available with crimp, snap-in tors are supplied in various contacts or preloaded with sizes, with preloaded con- Performance Specifications right-angle posted contacts. tacts on one or both sides. Contact Current Rating*: The solder-type posts are 5.0 amperes, max. The crimp type printed cir- formed 90° from the housing cuit connector is supplied Contact Engaging Force: to permit right-angle inter- with the housing unloaded— 16 oz. [4.4 N], max. facing between mother and the user buys only enough Contact Separation Force: contacts to satisfy circuit daughter boards. 2 oz. [0.6 N], min. requirements. This feature, Vibration: when coupled with the Tyco MIL-STD-202, Method 201 Electronics matched tooling, Operating Temperature: contributes substantially to Contacts –40°C to +85°C lower installed costs. Storage Temperature: –40°C to +85°C Housings: Glass-Filled Polyester, –55°C to +105°C Glass-Filled Phenolic, –65°C to +125°C Diallyl Phthalate, –65°C to +125°C *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 164 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors (Continued) Crimp, Snap-In Contacts Material and Finish: Phosphor bronze, plated as follows: Plating A—.000100-.000200 [0.00254-0.00508] tin (lubricant must Wire Barrel Crimp be used) Insulation Support Plating B—.000030 [0.00076] min. gold in mating area, gold flash on remainder of contact, with entire contact underplated .000050 [0.00127] min. nickel Plating C—.000015 [0.00038] min. gold in mating area, gold flash on Terminal Stop remainder of contact, with entire contact Locking Lance underplated .000050 [0.00127] min. nickel Co n t a c t Pgolaldt ionvge rD .0—00.0005000 [300.0 [001.02070] 7m6i]n m. ninic.kel AW RWa G n i / r m g e e m 2 SWi In ni g r se l ue lation DRWo au ni r b ge l ee Lo o Ps ae rt NumbeSrst r i p CFo i n n t i a s c h t AAM pP Mp- O a lic c- L h aE i tn oC e rT * fR orI C HTa o n o d l in mating area, remainder of contact Pi e c e Fo r m gold flash over .000015 [0.00038] min. 26-22 .050-.064 583990-3 583204-2 B — 466366-2 90028-3 nickel 0.12-0.4 1.27-1.63 — 343371-1 D Plating E—.000030 [0.00076] min. — 583361-2 A guonldde rinp lmateadti n.0g0 a0r0e5a,0 w [0it.h0 0en1t2ir7e] cmoinnt.act 22-18 .055-.080 .31.2005 558833998899--34 558833336611--34 CB 466367-2 909001072-83- 3(1 ( 2# 2#22-22)0) nickel 0.3-0.9 1.40-2.03 Max. — 583555-4 E 90101-3 (1 #20) Plating F—.000015 [0.00038] min. — 583555-6 F gold in mating area, with entire contact 16 .108 .080-.160 90031-8 (2 #18) underplated .000050 [0.00127] min. 1.25-1.40 2.74 2.03-4.06 583991-3 60151-6 B 466368-2 90101-3 (2 #20) nickel Max. 90101-3 (1 #16) *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Related Product Data: Notes: 1. Shorting contacts are available, consult Tyco Electronics. Performance Specifications— Notes: 2. Contacts and housings to accommodate .093 [2.36] thick PC boards can be made available, consult Tyco page 164 Electronics. Connector Housings— pages 167-169 Application Tooling— pages 184, 185 Hand Crimping Tool Contact Extraction Tool Extraction Used with Tool Housings Number Technical Documents: 480110-2, -5 (pages 186, 187): 480142-2, -3 582140-5 Product Specifications 582147-5 108-9013, 108-9043 582264-2 582500-2 Application Specification 582963-2 114-9003 583167-3 Instruction Sheets 465195-1 583280-1 583617-1 408-6591, 408-7045, 408-7622, 583680-1 408-7623, 408-7624, 408-7625, 583685-1 408-7626 583722-1 583723-1 Crimp Inspection Sheet 583724-1 CI 8050-33 583725-1 583726-1 465195-2 480133-2 Dummy Contact Plain Finish— Part No. 66084-1 Tin Finish— Material: Part No. 66084-2 Gold Finish— Phosphor bronze Part No. 66084-3 Technical Documents: (pages 186, 187): Instruction Sheet 408-7037 165 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors (Continued) .030 Solder Eyelet Contact [0.76] Material and Finish: .120 Contact [3.05] Surfaces Phosphor bronze, plated .000015 [0.00038] min. gold in contact area, gold flash on remainder of contact, with .100 entire contact underplated .000050 [2.54] .280 Locking Lance [0.00127] min. nickel [7.11] Standard Eyelet Type Contact Part No. 66067-5 (For .055-.070 [1.4-1.78] Thick PC Boards) Note:Solder tab will accommodate a maxi- mum of two 16 AWG [1.25-1.4 mm2] solid wires, or two 18 AWG [0.8-0.9 mm2] stranded wires. Post Type Contacts .185 Material and Finish: [4.70] Phosphor bronze, plated .000015 Contact [0.00038] min. gold in contact area, tin Surfaces on post, with entire contact underplated .000050 [0.00127] min. nickel L Locking Lance Loose Piece Post Contact Part No. Length (.045 x .045 L [1.14 x 1.14] Post) .960 1-582355-3 24.38 .560 1-582355-5 14.22 Note:Post type contacts are for .055-.070 [1.4-1.78] thick PC boards. Solder Dip Contacts For .052[1.32] Material and Finish: Dia. Hole Phosphor bronze, plated .000015 Contact [0.00038] min. gold in contact area or, Surfaces plated .000030 [0.00076] min. gold in contact area, tin on post, with entire .120 contact underplated .000050 [0.00127] [3.05] Locking min. nickel Lance Solder Dip Contact Part No. 583294-2 (.000015) Part No. 583294-1 (.000030) (For .062 [1.57] Thick PCBoard) 166 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline Glass-Filled Polyester Housings A B Material: Glass-filled polyester .156 Related Product Data: [3.96] F Card Guide Assembly—page 171 PC Board Thickness—.055-.070 [1.40-1.78] Performance Specifications— .325Card Slot page 164 [8.26] Depth Contacts—pages 165, 166 C Accessories—page 171 PC Board Layout—page 172 G H .700 [17.78] Technical Documents: (pages 186, 187): D Product Specifications 108-9013, 108-9043 Application Specification 114-9003 Instruction Sheet 408-7037 K J EDia. (2 Holes) No. of Dimensions Housing Dual Part Positions A B C D E F G H J K Numbers 1.785 1.535 1.264 .976 .125 1.100 .456 .250 .300 .350 6 583722-1 45.34 38.99 32.11 24.79 3.18 27.94 11.58 6.35 7.62 8.89 2.409 2.159 1.888 1.600 .125 1.724 .456 .250 .300 .350 10 583723-1 61.19 54.84 47.96 40.64 3.18 43.79 11.58 6.35 7.62 8.89 2.721 2.471 2.200 1.912 .125 2.036 .456 .250 .300 .350 12 *583724-1* 69.11 62.76 55.88 48.56 3.18 51.71 11.58 6.35 7.62 8.89 3.189 2.939 2.668 2.380 .128 2.504 .456 .250 .300 .350 15 583680-1 81.00 74.65 67.77 60.45 3.25 63.60 11.58 6.35 7.62 8.89 3.657 3.407 3.136 2.848 .125 2.972 .456 .250 .300 .350 18 583725-1 92.89 86.54 79.65 72.34 3.18 75.49 11.58 6.35 7.62 8.89 3.657 3.407 3.136 2.848 .156 2.972 .456 .250 .300 .350 18 583725-3 92.89 86.54 79.65 72.34 3.96 75.49 11.58 6.35 7.62 8.89 4.281 4.031 3.760 3.472 .125 3.596 .456 .250 .300 .350 22 583617-1 108.74 102.39 95.50 88.19 3.18 91.34 11.58 6.35 7.62 8.89 4.281 4.031 3.760 3.472 .156 3.596 .456 .250 .300 .350 22 583617-3 108.74 102.39 95.50 88.19 3.96 91.34 11.58 6.35 7.62 8.89 4.749 4.499 4.228 3.940 .125 4.064 .456 .250 .300 .350 25 583726-1 120.62 114.27 107.39 100.01 3.18 103.23 11.58 6.35 7.62 8.89 5.529 5.279 5.008 4.720 .125 4.844 .456 .250 .300 .350 30 583685-1 140.44 134.09 127.20 119.89 3.18 123.04 11.58 6.35 7.62 8.89 7.015 6.578 5.942 5.722 .156 5.782 .455 .290 .325 .437 36 583552-1 178.18 167.08 150.92 145.33 3.96 146.86 11.55 7.36 8.25 11.10 *CSA certification pending. Note:Other connector sizes can be made available, consult Tyco Electronics. 167 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline (Continued) Glass-Filled Phenolic Housings Material: Glass-filled phenolic A B per MIL-M-14F F Related Product Data: .156 JDia. [3.96] D (2 Holes) Card Guide Assembly—page 171 Performance Specifications— page 164 Contacts—pages 165, 166 Accessories—page 171 PC Board Layout—page 172 Technical Documents: (pages 186, 187): Product Specifications 108-9013, 108-9043 C Application Specification 114-9003 .700 G H Instruction Sheet 408-7037 [17.78] E No. of Dimensions Board Housing Dual Part Positions A B C D E F G H J Thickness Numbers 1.982 1.767 1.550 1.410 1.288 .340 .250 .458 .125 .055-.070 8 582140-5 50.34 44.88 39.37 35.81 32.72 8.64 6.35 11.63 3.18 1.40-1.78 2.407 2.157 1.866 1.722 1.598 .360 .250 .456 .128 .055-.070 10 582963-2* 61.14 54.79 47.90 43.74 40.59 9.14 6.35 11.58 3.25 1.40-1.78 1.886 1.722 1.598 .360 .055-.070 10 — — — — — 583280-11 47.90 43.74 40.59 9.14 1.40-1.78 3.182 2.854 2.621 2.506 2.376 .350 .250 .466 .187 .055-.070 15 480110-5 80.82 72.49 66.57 63.65 60.35 8.89 6.35 11.84 4.75 1.40-1.78 3.182 2.854 2.621 2.506 2.376 .350 .250 .466 .125 .055-.070 15 1-582147-5* 80.82 72.49 66.57 63.65 60.35 8.89 6.35 11.84 3.18 1.40-1.78 3.182 2.933 2.621 2.506 2.376 .350 .250 .466 .128 .055-.070 15 1-582500-5 80.82 74.49 66.57 63.65 60.35 8.89 6.35 11.84 3.25 1.40-1.78 3.650 3.400 3.088 2.948 2.843 .375 .155 .406 .156 .055-.070 18 480133-5 92.71 86.36 78.43 74.87 72.21 9.52 3.93 10.31 3.96 1.40-1.78 4.274 4.025 3.754 3.591 3.466 .350 .250 .456 .125 .055-.070 22 480142-3 108.56 102.24 95.35 91.21 88.04 8.89 6.35 11.58 3.18 1.40-1.78 4.741 4.493 4.221 4.058 3.933 .350 .250 .456 .125 .055-.070 25 583167-3* 120.42 114.12 107.21 103.07 99.90 8.89 6.35 11.58 3.18 1.40-1.78 6.365 5.928 5.292 5.132 5.072 .485 .290 .455 .187 .084-.104 32 582264-22,3 161.67 150.57 134.42 130.35 128.83 12.32 7.37 11.56 4.75 2.13-2.64 *CSA certification pending. 1Housing without mounting ears. 2Housing does not accommodate intercontact keying plug. 3For .086 to .104 [2.18 to 2.64] thick PC boards (special contacts required). Note:Other connector sizes can be made available, consult Tyco Electronics. 168 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline (Continued) Diallyl Phthalate Housings Material: Diallyl phthalate A B F per MIL-M-14F Related Product Data: JDia. D (2 Holes) Card Guide Assembly—page 171 .156 [3.96] Performance Specifications— page 164 Contacts—pages 165, 166 Accessories—page 171 PC Board Layout—page 172 Technical Documents: (pages 186, 187): Product Specifications 108-9013, 108-9043 C Application Specification 114-9003 .700 G H Instruction Sheet 408-7037 [17.78] E Single Slot Housing No. of Dimensions Board Housing Dual Part Positions A B C D E F G H J Thickness Numbers 3.187 2.859 2.625 2.510 2.380 .350 .250 .466 .187 .055-.070 15 480110-2 80.95 72.62 66.68 63.75 60.45 8.89 6.35 11.84 4.15 1.40-1.78 3.187 2.938 2.625 2.510 2.380 .350 .250 .466 .128 .055-.070 15 582500-2 80.95 74.63 66.68 63.75 60.45 8.89 6.35 11.84 3.25 1.40-1.78 3.656 3.406 3.093 2.953 2.848 .375 .155 .406 .156 .055-.070 18 480133-2 92.86 86.51 78.56 75.01 72.34 9.53 3.94 10.31 3.96 1.40-1.78 4.281 4.031 3.760 3.596 3.472 .350 .250 .456 .125 .055-.070 22 480142-2 108.74 102.39 95.90 91.34 88.19 8.89 6.35 11.58 3.18 1.40-1.78 Note:Other connector sizes can be made available, consult Tyco Electronics. 169 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline (Continued) Housings Preloaded with Right-Angle Post Contacts A Material and Finish: F Housing—See chart below Contacts—Phosphor bronze, plated .000015 [0.00038] min. gold in mating .156 area, with entire contact underplated [3.96] D .000050 [0.00127] min. nickel Post—Phosphor bronze, tin plated Retaining Spring—Stainless steel B .125 [3.18] C Related Product Data: J Card Guide Assembly—page 171 G H Performance Specifications— .125 page 164 [3.18] Accessories—page 171 E (2 DHioal.es) PC Board Layout—page 172 Technical Documents: (pages 186, 187): Product Specification Post Contact 108-9013 .022 x .036[0.56 x 0.91] Phosphor Bronze Phosphor Bronze Selective Gold Plate Tin Plated in Contact Area .000015 [0.00038] Gold .090 [2.29] Min. .325 .150 [8.26] [3.81] .156 [3.96] No. of Dimensions Part Housing Dual Positions A B C D E F G H J Numbers Material 2.407 2.157 1.886 1.722 1.598 .360 .700 .250 .456 10 583599-1* 61.14 54.79 47.9 43.74 40.59 9.14 17.78 6.35 11.58 3.182 2.933 2.621 2.506 2.376 .350 .700 .250 .466 Glass-Filled 15 583545-1* 80.82 74.5 66.57 63.65 60.35 8.89 17.78 6.35 11.84 Phenolic 3.650 3.400 3.088 2.948 2.843 .375 .700 .250 .406 583544-1* 92.71 86.36 78.44 74.88 72.21 9.53 17.78 6.35 10.31 18 3.657 3.457 3.136 2.972 2.848 .350 .700 .250 .456 Glass-Filled 530851-1* 92.89 86.54 79.65 75.49 72.34 8.89 17.78 6.35 11.58 Polyester 4.274 4.025 3.754 3.591 3.466 .350 .700 .250 .456 Glass-Filled 583458-2* 108.56 102.24 95.35 91.21 88.04 8.89 17.78 6.35 11.58 Phenolic 22 4.281 4.031 3.760 3.596 3.472 .350 .700 .250 .456 Glass-Filled 583975-1* 108.74 102.39 95.50 91.34 88.19 8.89 17.78 6.35 11.58 Polyester 5.270 4.961 4.680 4.527 4.402 .350 .700 .250 .456 Glass-Filled 28 530061-1* 133.86 126.01 118.87 114.99 111.81 8.89 17.78 6.35 11.58 Phenolic *CSA certification pending. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. Finished hole size is .048-.054 [1.22-1.37] diameter. 170 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connector Accessories Keying Plugs On-Contact Keying Plug Intercontact Keying Plugs Material: Nylon Technical Documents: .040 [1.02] Wide—Part No. 582501-1 (pages 186, 187): .025 [0.64] Wide—Part No. 583274-1 Instruction Sheets 408-7036, 408-7037, 408-7068, 408-7339 .055-.070[1.4-1.78] Board Thickness—Part No. 480143-1 Commoning Springs .055-.070 [1.4-1.78] thk. PC Material and Finish: board—Part No. 66092-1 Beryllium copper, gold plated .055-.070 [1.4-1.78] and Technical Documents: .084-.104 [2.13-2.64] thk. PC board with locking latches— (pages 186, 187): Part No. 583454-1 Instruction Sheet 408-7419 Retaining Springs Material: Stainless steel Technical Documents: (pages 186, 187): Nickel Finish—Part No. 42973-1 Plain Finish—Part No. 42973-2 Instruction Sheets 408-7035, Gold Finish—Part No. 42973-3 408-7037 Card Guides .187 [4.75] Material: Glass-filled nylon, black Technical Documents: .093 Dia. [2.36] (pages 186, 187): .135 .245 [3.43] [6.22] Instruction Sheets 408-7557, .545 408-7565 [13.84] Ref. .076 .250 [1.93] [6.35] 4.000 [101.6] .200 [5.08] .240 [6.1] .3 0 8 [7 . 8 2 ] .375 Connector (Ref.) [9.52] Card Guide Part Number 583760-1 Note:Card guides may be used with all connector housings having mounting ears. 171 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connector PC Board Layouts Recommended PC Board Layouts Technical Documents: (pages 186, 187): .330 Instruction Sheet 408-7037 [8.38] Min. B .050 Min. .156 .031 Max. [1.27] [3.96] [0.79] A Base Line Note:Slot for intercontact keying may be located between any two pads (except the first two and last two pads). No. of Housing Dimensions Positions Material A B 1.396 .152 8 P 35.46 3.86 1.709 .151 10 P 43.40 3.84 2.491 .153 DP 63.27 3.89 15 2.487 .152 P 63.17 3.86 2.940 .144 18 DP 74.68 3.66 3.583 .153 DP 91.00 3.89 22 3.578 .151 P 90.88 3.84 4.043 .150 25 P 102.69 3.81 5.117 .140 32 P 129.97 3.56 DP = Diallyl Phthalate P = Phenolic Note:Board thickness .055-.070[1.4-1.78] all posi- tions except 32 position–.084-.104[2.13-2.64]. 172 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors Product Facts n High current capability up to 30 amperes* n UL rated 94V-0 glass-filled thermoplastic housings n Choice of wire-to-board and board-to-board (solder tail) connector configurations in 3, 4, 8, 9, 10 and 12 contact sizes n Heavy duty contacts made of high conductivity copper alloy with tin-over-nickel plating n Contacts on .312 [7.92] centers n Large redundant areas of contact provide excellent electrical continuity n Connectors available for mating with .062 [1.57], .093 [2.36] and .125 [3.18] thick double-sided PC boards n Contacts furnished in strip form for automatic machine termination and loose form for hand tool application n Recognized under the Component Program of AMP High Current Edge Wire-to-board housings are Performance Specifications Underwriters Connectors are an economi- available with and without Contact Current Rating*: Laboratories Inc. cal answer to the costly mounting ears and with 30 amperes, max. File No. E28476 issue of interconnecting capabilities of mating with Dielectric Withstanding Voltage n Certified by Canadian high current printed circuit- .062 [1.57], .093 [2.36] and (Sea Level): Standards ry. Designed for a current .125 [3.18] thick double- 1800 VAC Association capability of up to 30 sided daughter boards. Operating Voltage: File No. LR 7189 amperes*, these connectors These housings are 250 VAC, max. feature UL rated 94V-0, designed to accept crimp, rugged glass-filled thermo- snap-in contacts which can Insulation Resistance: plastic housings and high accommodate a wire size 1000 megohms, min. conductivity copper alloy range of 16-10 AWG [1.25-6 Contact Resistance @ 30 amperes: contacts with bright tin-over- mm 2]. Contacts are fur- 2 milliohms, max. nickel plating. Contacts are nished in strip form for auto- Operating Temperature: on .312 [7.92] centers. matic machine termination –40°C to +95°C and in loose form for hand Connectors are available in Contact Engagement Force: tool application. 3, 4, 8, 9, 10 and 12 contact 40 oz. [11.12 N], max. positions and in a choice of While the basic contact is two styles for board-to- designed to carry 30 board and wire-to-board amperes* of current, the ap p l i c a t i o n s . actual number of contacts in *When used with a .180 [4.57] a connector carrying 30 wide double-sided PCboard with The board-to-board connec- 5 oz. [0.14 Kg] min. copper each amperes is limited by the tors are supplied preloaded side. Consult Tyco Electronics “T” rise of the connector and with solder tail contacts and engineering when paralleling the PC board. are designed to mate with contacts for power applications. .062 [1.57] thick double- sided daughter boards. 173 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors (Continued) Crimp, Snap-In Contacts Material and Finish: A—Copper alloy CDA-195 plated .000150 [0.00381] bright tin over .195 .000030 [0.00076] nickel B[[±±.00.2501] [4.95] B—Copper alloy CDA-195 plated C .000150 [0.00381] silver all over Related Product Data: A .325 [8.26] Performance Specifications— .390 [3.1.8510] page 173 [9.91] Connector Housings—page 175 Application Tooling—pages 184, 185 Technical Documents: (pages 186, 187): Product Specification 108-9045 Pl a t i n g WRira en Sg ie ze Ins. Dia. Di m e n s i o n s DaMuga th e ta eb r l Be oard Contact Part Numbers AMA pP p- O lic- L aE toC rT fRo rI C H6a9 n7 d1 T0 - o1 ol Application Specification AW G mm 2 Ra n g e A B C Th i c k n e s s Loose Piece Strip Form Ma c h i n e Die Insert 114-9005 .0 9 0 - . 1 4 5 .2 6 0 1. 1 6 0 .2 8 5 .0 6 2 A 16 - 1 4 1. 2 5 - 2 53 0 5 1 8 - 1 53 0 5 1 7 - 2 46 6 4 3 9 - 2 90 3 3 3 - 1 Instruction Sheets 408-7782, 2. 2 9 - 3 . 6 8 6. 6 0 29 . 4 6 7. 2 4 1. 5 7 408-7783, 408-7802 A 12 - 1 0 3- 6 .1 6 0 - . 2 1 0 .1 9 0 1. 2 3 0 .2 8 5 .0 6 2 53 0 5 2 0 - 1 53 0 5 1 9 - 2 46 6 4 3 8 - 2 90 3 3 2 - 1 4. 0 6 - 5 . 3 3 4. 8 3 31 . 2 4 7. 2 4 1. 5 7 .1 6 0 - . 2 1 0 .1 9 0 1. 2 3 0 .2 8 5 .0 6 2 B 12 - 1 0 3- 6 — 53 0 5 1 9 - 3 46 6 4 3 8 - 2 90 3 3 2 - 1 4. 0 6 - 5 . 3 3 4. 8 3 31 . 2 4 7. 2 4 1. 5 7 .1 6 0 - . 2 1 0 .1 9 0 1. 2 3 0 .3 4 7 .0 9 3 A 12 - 1 0 3- 6 — 53 1 3 7 3 - 2 46 6 4 3 8 - 2 90 3 3 2 - 1 4. 0 6 - 5 . 3 3 4. 8 3 31 . 2 4 8. 8 1 2. 3 6 *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Hand Crimping Tool Extraction Tool 69710-1 91116-1 174 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors, .312 [7.92] Centerline Housings With Mounting Ears Material: White glass-filled polyester, 94V-0 rated A .312 B Related Product Data: [7.92] Performance Specifications— G[±.010* page 173 [±0.25] .156 Dia. [3.96] Contacts—page 174 E[±.007* [±0.18] F[±.015* [±0.38] Technical Documents: (pages 186, 187): Product Specification 108-9045 Instruction Sheet 408-9123 X, Y PC Board Thickness C .750±.010 [19.05±0.25] .400 [10.16] Board Slot Depth 1.400±.010 .300 [35.56±0.25] [7.62] Void Coring D[[±±0.0.2150]* Optional Housing Part Numbers Noof. Dimensions X = .062 [1.57] Y = .093 [2.36] Pos. A B C D E F G With With Mtg. Ears Mtg. Ears 1.024 .624 1.164 1.114 1.538 1.972 .500 3 — 531370-2 26.01 15.85 29.57 28.3 39.07 50.09 12.70 1.336 .936 1.476 1.426 1.850 2.284 .437 4 530521-3 — 33.93 23.77 37.49 36.22 46.99 58.01 11.10 2.584 2.184 2.724 2.674 3.098 3.532 .437 8 530521-6 — 65.63 55.47 69.19 67.92 78.69 89.71 11.10 2.896 2.496 3.036 2.986 3.410 3.844 .437 9 530521-7 — 73.56 63.40 77.11 75.84 86.61 97.64 11.10 3.832 3.432 3.972 3.922 4.346 4.780 .437 12 530521-9 — 97.33 87.17 10.89 99.62 110.39 121.41 11.10 Notes: 1. XHousings designed to accept .055-.070[1.4-1.78] thick daughter boards; use intercontact Keying Plug No. 530533-1. Notes: 2. YHousings designed to accept .084-.102[2.13-2.59] thick daughter boards; use intercontact Keying Plug No. 531369-1. + Contact 531373-2. No t e s : 3. Use Extraction Tool No. 91116-1 to remove contacts. (Refer to Instruction Sheet 408-7782). 4. Other connector sizes can be made available, consult Tyco Electronics. 175 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors .312 [7.92] Centerline (Continued) Housings Preloaded with B[±.007 [±0.18] Solder Tail Contacts .312 [7.92] .437±.010* Material and Finish: [11.1±0.25] H94oVu-s0i nragte—dWhite glass-filled polyester, [.31.5966] Dia. E D [5.2.5148] Contacts— Fit for A—Copper alloy CDA-195 plated .062 .000150 [0.00381] bright tin C[±.010 [1.57] [±0.25] PC Board over .000030 [0.00076] nickel B—Copper alloy CDA-195 plated .000150 [0.00381] silver plate .937 .300 over .000030 [0.00076] thk. nickel [23.8][7.62] .400 C—Copper alloy CDA-195 plated [10.16] Board Slot .000030 [0.00076] gold in contact area, Depth .000150 [0.00381] tin-lead solder post, over .000030 [0.00076] nickel .030 [0.76] F Related Product Data: Performance Specifications— A[±.015 page 173 [±0.38] Technical Documents: (pages 186, 187): Product Specification Void Coring Optional 108-9045 .[.[13133.3.3300±±±±00....0000008833]] DDiiaa.. [[..2211..00664444±±±±.0.000..00002525]] DDiiaa.. ..337755 ..553399 [[99..5522]] EE [[1133..6699]] BB PC Board Thickness: .062[1.57] Recommended PC Board Hole Layout *May go to .020[0.51] over nominal at top center of housing. No. of Dimensions Plating Connector Positions A B C D E F Part Numbers 3 1.972 1.538 1.164 1.024 .624 .180 A 531353-2 50.09 39.07 29.57 26.01 15.85 4.57 4 2.284 1.850 1.476 1.336 .936 .180 A 531353-3 58.01 46.99 37.49 33.93 23.77 4.57 5 2.593 2.162 1.788 1.648 1.248 .180 A 531353-4 65.86 54.91 45.42 41.86 31.70 4.57 6 2.908 2.474 2.100 1.960 1.560 .180 A 531353-5 73.86 62.84 53.35 49.78 39.62 4.57 .180 A 531353-6 8 3.532 3.098 2.724 2.584 2.184 4.57 B 145116-3 89.71 78.69 69.19 66.63 55.47 .283 B 146912-2 7.19 9 3.844 3.410 3.036 2.896 2.496 .180 A 531353-7 97.64 86.61 77.11 73.56 63.40 4.57 .180 A 531353-8 10 4.156 3.722 3.348 3.208 2.808 4.57 B 145116-1 105.56 94.54 85.04 81.48 71.32 .283 7.19 B 146912-3 A 531353-9 .180 B 145116-2 12 4.780 4.346 3.972 3.832 3.432 4.57 C 645200-3 121.41 110.39 100.89 97.33 87.17 .283 B 146912-1 7.19 Notes: 1. A .0 6 2 [1.57] thick dummy PC board should be inserted into the connector during soldering to a mother board. 2. Other connector sizes can be made available, consult Tyco Electronics. 176 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors Product Facts n Right angle design permits cabling in close quarters n Recessed contacts help prevent arcing n Sizes and configurations available with or without mounting ears n Lowest installed costs achieved through high- speed compression crimp- ing with AMP matched tooling n Meets quality and reliability requirements for appliance controls, vending machine subassemblies and business machines n Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 n Certified by Canadian Standards Association File No. LR 7189 This flag-type connector is the keyed housing to the Performance Specifications designed to meet the quali- card cutout and double Contact Rating*: ty and reliability of such locking of the contacts 5 amperes equipment as appliance when a PC board is High Potential: controls, vending machine inserted. In addition, con- 2200 VAC, rms subassemblies, television, tacts are recessed to pre- stereo, business machines vent arcing. All sizes and Operating Temperature: –40°C to +105°C and other applications with configurations are available similar control needs. with or without mounting Vibration: ears. Added to low initial 10 to 55 cps per MIL-STD-1344, Among its assembly-saving cost, lowest installed costs Method 202 features is a right-angle are achieved through high- design which permits speed compression crimp- cabling in close quarters, ing with Tyco Electronics where it does not require matched tooling. frame mounting to attach *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 177 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors (Continued) Ta p e r e d Beam Crimp, Snap-In Contacts Material and Finish: Beryllium copper or phosphor bronze (see chart) plated as follows: Plating A—.000030 [0.00076] gold in mating area, with entire contact under- plated .000050 [0.00127] nickel Plating B—.000015 [0.00127] gold in mating area, with entire contact under- plated .000050 [0.00127] nickel Plating C—.000150 [0.00381] tin Related Product Data: Performance Specifications— page 177 CAopnpnlieccattoior nH Toouosliinnggs——ppaaggees 117894, 185 Wire Size Range Insulation Material CFoinntiascht Contact Part Numbers AMApPp-Olic-LaEtoCrT fRoIrC Hand Tool AWG mm2 Dia. Range (Plating) Loose Piece Strip Form Machine* Technical Documents: 26-22 0.12-0. 4 .00.3859--.10.5450 BCeroyplplieurm AB 530—005-3 553300000044--67 466586-2 90094-4 (pages 186, 187): B — 530002-7 Product Specification Phosphor C — 530002-5 Bronze 108-9038 A — 530002-3 .060-.090 Application Specification 22-18 0. 3 -0. 9 1.52-2.29 C — 530006-5 466424-2 90027-4 114-9002 Beryllium A — 530006-6 Instruction Sheets 408-7047, Copper B 530007-3 — 408-7780, 408-7848, 408-7849 C — 530006-2 .090-.130 Phosphor 18-16 0. 8 -1. 4 C — 530505-5 466413-2 — 2.29-3.30 Bronze *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Contact Extraction Tool Hand Crimping Tool 810992-1 178 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors (Continued) Housings, With and Without Mounting Ears A .100 Material: Natural nylon [2.54] Related Product Data: Performance Specifications— page 177 Contacts—page 178 PC Board Layout—page 181 .156 .265 [3.96] [6.73] Dia. 2 Holes .500 T(peagcehsn 1i8c6a, l1 D87o):cuments: [2.0.2990] B [1.0.5620] .095 [9.3.5735] [12.70] [2.41] Product Specification 108-9038 Application Specification .590 114-9002 [14.99] Instruction Sheet 408-7047 Fit for .055-.070 [1.40-1.78] On-Contact Keying Plug [.72.9459] PCBoard .156 [3.96] .380 Material: Nylon [9.65] C .190 [4.83] D Part Number 583661-1 Technical Documents: (pages 186, 187): Part Numbers Instruction Sheet 408-7486 No. Dimensions With Mounting Ears Without Mounting Ears of For Ins. For Ins. For Ins. For Ins. Pos. A B C D Dia. Range Dia. Range Dia. Range Dia. Range .0 3 5 - . 0 9 0 .0 9 0 - . 1 3 0 .0 3 5 - . 0 9 0 .0 9 0 - . 1 3 0 [0 . 8 9 - 2 . 2 9 ] [2 . 2 9 - 3 . 3 0 ] [0 . 8 9 - 2 . 2 9 ] [2 . 2 9 - 3 . 3 0 ] 1.384 .414 .624 1.004 3 582380-9 — — — 35.15 10.52 15.85 25.50 .736 .936 5 — — — — 582370-9 530853-2 22.40 27.74 1.852 .882 1.092 1.472 6 582382-9 530509-1 582371-9 530853-3 47.04 22.40 27.74 37.39 2.320 1.350 1.560 1.940 9 582383-9 530509-2 582375-9 — 58.93 34.29 39.62 49.28 2.788 1.818 2.028 2.408 12 582384-9 530509-6 582376-9 530853-5 70.82 46.18 51.51 61.16 3.100 2.130 2.340 2.720 14 582385-9 530509-7 582372-9 530853-6 78.74 54.10 59.44 69.09 3.256 2.286 2.496 2.876 15 582386-9 530509-3 582377-9 — 82.70 58.06 63.40 73.05 3.724 2.754 2.964 3.344 18 582387-9 530509-8 582378-9 530853-8 94.59 69.95 75.29 84.94 4.348 3.378 3.588 3.968 22 582388-9 530509-9 582379-9 — 110.44 85.80 91.14 100.79 Note: Other connector sizes can be made available, consult Tyco Electronics. 179 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors (Continued) Recommended PC Board Layouts Related PC Board Data: Recommended Board Thickness— A[±±.00.0038] [.00.1346//.00.1461] .055-.070 [1.40-1.78] .044 ±.005 Recommended Chamfer of Mating [1.12±0.13] Edge of Boards—.015 [0.38] x 45° .062 ±.005 Recommended Pad Plating—Tin [1.57±0.13] .156 ±.005 [3.96±0.13] .000150-.000400 [0.00381-0.01016] thick .280 ±.008 [7 . 1 1 ±0.13] Contact Pads Contact Pads .148[3.76] R. Retaining Dimples (Optional) .115 Min. A±.003 .070 ±.005 [2.92] [±0.08] [1.78±0.13] No. of Dimension Positions A .400 3 10.16 .712 5 18.09 .868 6 22.05 1.337 9 33.96 1.805 12 45.85 2.117 14 53.77 2.272 15 57.71 2.741 18 69.62 3.365 22 85.47 180 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Printed Circuit Board Connector Hood Assemblies Product Facts n Can be used with the highly versatile AMP-LEAF and Crimp Snap Twin Leaf printed circuit edge connectors n Clamping capabilities for wire bundles to .550 [13.97] maximum diameter n Available with 90° or 180° cable outlet n All plastic construction— thermoplastic material UL rated 94V-0 for electrical and mechanical applica- tions up to + 105°C n Thermoplastic material has excellent resistance to common commercial cleaners when used at moderate temperatures n Separate hood assembly halves permit easy cable dressing n Furnished in convenient kit form—each kit includes four cable clamp sizes For use with the following connectors: Crimp Snap Twin Leaf Connectors (Pages 154-163) AMP-LEAF Connectors (Pages 164-172) 181 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Specific Product Name_12 Hel. Con. (Continued)_9pt Helvetica Lt Condensed 90° Cable Outlet Material: Natural color thermoplastic Related Product Data: [.62.4100] [.62.6600] [.83.5809] [1.14.4108] #5 x 3/8[9.52] Crimp Snap Twin Leaf Thread Forming Connectors—pages 154-163 Screw (3) AMP-LEAFConnectors— 1.500 pages 164-172 [38.10] 1.150 [29.21] Technical Documents: (pages 186, 187): Instruction Sheet 408-7719 .170 .625 [4.32] [15.88] 1.797 [45.64] #5 x 5/8[15.88] Thread Forming .375 Screw (2) [9.52] Connector Size Ho o d Connector Width.3 8 0[9. 6 5] Max. Connector Width .437[11 . 1 0 ] L Dim. AMP Hood AMP Hood NPoo. so.f CCeonnttearcstMCtegn. tHeorsle L(Menagxt.h) (Max.) CoFna nm ei cl y tor KAits Nsuemmbbleyr* CoFna nm ei cl y tor KAits Ns ue m mb bl ey r* 1.56 3.406 3.685 3.826 18 AMP-LEAF 530088-3 — — 3.96 86.51 93.60 97.18 .156 4.031 4.296 4.451 Crimp Snap 22 — — 1-530088-4 3.96 102.39 109.12 113.06 Twin Leaf *All screws and four sizes of cable clamps are supplied with each kit. Note: Other hood sizes can be made available, consult Tyco Electronics. 182 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors (Board-to-Board, Wire-to-Board) Printed Circuit Board Connector Hood Assemblies (Continued) 180° Cable Outlet .350 .440 [8.89] [11.18] Material: Natural color thermoplastic .625 [15.88] Related Product Data: .260 [6.60] AMP-LEAF Connectors— pages 164-172 1.500 [38.10] .170 [4.32] 1.875 Technical Documents: [47.62] (pages 186, 187): .240 [6.10] Instruction Sheet 408-7719 1.150 [29.21] #5 x 3/8[9.52] Thread Forming #5 x 5/8[15.88] Screw (2) Thread Forming .563 Screw (2) [14.30] Connector Size Hood Connector Width .380 [9.65] Max. No. of Contact Mtg. Hole Length L Dim. AMPConnector Hood Assembly Pos. Centers Centers (Max.) (Max.) Fa m i l y Kit Number* .156 4.031 4.321 4.451 22 AMP-LEAF 530087-4 3.96 102.39 109.76 113.06 *All screws and four sizes of cable clamps are supplied with each kit. Note: Other hood sizes can be made available, consult Tyco Electronics. 183 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Application Tooling for Wire Crimp Contacts Tooling shown on this page is designed to terminate wire crimp contacts used in various wire-to-board connectors. AMP-O-LECTRIC Model “G” Terminating Machine (Shown with Optional Crimp Quality Monitor) The AMP-O-LECTRIC Model automatic precision adjust “G” is a semi-automatic and machine-mounted sen- bench-top machine for ter- sors, or with manual preci- minating wire using reeled sion adjust with or without terminals and contacts. It sensors. All versions will features a quiet and reliable accept existing Ty c o direct motor drive, micro- El e c t r o n i c s ministyle appli- processor controls for ease cators with minor modifica- of setup and operation, and tions. guarding and lighting For further details, request designed for operator con- Tyco ElectronicsCatalog venience and safety. Three 65828. versions are available: with AMP-O-MATIC Model II Stripper/Crimper Machine (Shown with Optional Crimp Quality Monitor) This machine also strips wire, and is therefore used to terminate jacketed cable. It features manual precision adjust, keyed strip blades for faster, more accurate setups, and an efficient scrap removal system. Applicators are inter- changeable. All adjust- ments can be made from the front of the machine without special tools. Entry Level Terminator (ELT), 1338600-(x) Semiautomatic Bench but the highest crimp force Terminator for side- and applications. Optional end-feed reeled terminals equipment is also available and contacts. The ELT uses to meet your specific appli- a DC motor with gear box cation requirements. drive. The result is a small- For more information, footprint design that is fast request catalog 1308382. and quiet. Cycle time is less than 0.400 sec. with an operation sound level of 76dBa. With a crimp force capacity of 3,000 pounds, the ELT is available for all Optional Stripping Module for the ELT and AMP-O-LECTRIC Model G The combination of the of damaging wire conduc- Stripping Module with the tors during handling or stor- AMP-O-LECTRIC Model G age. Once the wire is fed Terminator or the Entry into the start sensor the Level Terminator provides Stripping Module does the an economical, proficient rest, improving placement method of stripping wire accuracy. and crimping terminals on For more information, the same machine. Wires request catalog 1309085. are stripped moments before crimping, meaning there is virtually no chance 184 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Application Tooling for Wire Crimp Contacts (Continued) AMPOMATOR CLS IV+ Lead-Making Machines, 356500-1, -2 Fully-automatic machines wire runout and splice that measure, cut, strip and detection, and motorized terminate single leads. pre-feed with wire straight- Microprocessor-controlled, ener. Crimp quality monitor- and programmed and oper- ing is also available. ated using an easy-to-fol- For more information, low, menu-driven request catalog 124324. touchscreen. Features include direct-drive termi- nating units with precision crimp height adjustment, fully programmable setups, Crimp Quality Monitor (CQM), 1320420-1, -2 This unique system pro- AMP-O-LECTRIC Model “G” vides 100% on-the-fly crimp Termination Machines, the inspection. It measures the monitor is mounted to the crimp height of each termi- machine. When used with nation, and evaluates the AMPOMATOR CLS IV Lead- quality of each crimp. If a Making Machines, it is inte- crimp is questionable, the grated into the machine’s monitor alerts the operator operating system. with both visual and audible For more information, alarms. It also provides request catalog 82275. ports for printing and net- working. When used with CERTI-CRIMP Straight Action Hand Tools (SAHT) Premium grade hand tools. For more information, Feature ratchet control to request catalog 65780. provide complete crimp cycle. Die sets close in a straight line. Include a con- tact locator and wire stop, plus an insulation crimp adjustment lever, when applicable. Approximate weight 1.3 lb [0.59 kg]. 626 Pneumatic Tool System Lightweight, air-operated control available to provide modular tooling system. complete crimp cycle. Accepts a wide variety of For more information, interchangeable heads for request catalog 124208. crimping various types of contacts, terminals and splices onto wires ranging 6-26 AWG [13-0.12 mm2], plus coaxial and fiber optic cable. Available with either hand- or foot-actuation switch. Optional ratchet 185 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Technical Documents The following is a list of technical documents covering 114-26003 Linear ZIF PC Board Edge Connector, the application, performance and maintenance of the .100 [2.54] Centerline AMP Card Edge Connectors presented in this catalog. Instruction Sheets: Product Specificationsdescribe technical performance char- 408-2665 Linear ZIF, Carrier Removal Tool Series acteristics and verification tests. They are intended for the 265924 Design, Component and Quality Engineer. 408-2995 Linear ZIF, Housing Wing Removal and Replacement Tool 266233-1 Application Specificationsdescribe requirements for using 408-2999 Linear ZIF, T-Bar Insertion Tool Series 266267 the product in its intended application and/or crimping 408-6915 Linear ZIF, Housing Assembly Insertion Tool information. They are intended for the Packaging and Series 313136 Design Engineer and the Setup person. 408-6916 Linear ZIF, T-Bar Insertion Tool Series 313139 Instruction Sheetsprovide instructions for assembling Press-Fit Board-to-Board Connectors or applying the product. They are intended for the Manufacturing Assembler or Operator. AMP PACE Connectors Solder Type Board-to-Board Connectors Product Specifications: 108-14019 AMP PACE Connector, .125 x .250 [3.18 x 6.35] Standard Edge .050 Series PCI Connectors Centerline Product Specification: 108-26003 ACTION PIN Contacts 108-14034 Standard Edge .050 Series PCI Connector Application Specification: Application Specification: 114-26002 AMP PACE Connector 114-26012 Standard Edge .050 Series PCIConnector Instruction Sheets: Standard Edge .050 Series Connectors 408-2933 Contact Replacement Tool .100 x .200 Product Specification: [2.54 x 5.08] and .125 x .250 [3.18 x 6.35], 108-14034 Standard Edge .050 Series Connector AMP PACE Connector 408-2978 Seating Tool Ground Module, Application Specification: AMP PACE Connector 114-26012 Standard Edge .050 Series Connector 408-2979 Seating Tool Power Module, Standard Edge II Connectors AMP PACE Connector 408-6726 Seating Tool, .156 x .200 [3.96 x 5.08] Product Specification: Part No. 59955, AMP PACE Connector 108-9039 Standard Edge II Connector 408-6727 Seating Tool, .125 x .125 [3.18 x 3.18] Low Profile Connectors Part No. 59953, AMP PACE Connector Product Specification: 408-6881 Contact Replacement Tool 108-9044 Low Profile Edge Connector .100 x .100 [2.54 x 2.54] with and without Scoops AMP PACE Connector Instruction Sheet: 408-9058 Seating Tool .100 x .200 [2.54 x 5.08] with Card 408-7772 Contact Replacement, Low Profile Edge Connector Scoops, Part No. 58150, AMP PACE Connector Twin Leaf Mother Board Connectors 408-9063 Seating Tool .125 x .250 [3.18 x 6.35] Part No. 58142, AMP PACE Connector Product Specification: 408-9067 Seating Tool .100 x .200 [2.54 x 5.08] 108-9027 Twin Leaf Mother Board Connector Part No. 58140, AMP PACE Connector Instruction Sheets: 408-9091 Accessories and Tooling, .100 x .200 408-7479 Keying Plugs, Twin Leaf Mother Board Connector [2.54 x 5.08] AMP PACE Connector 408-7498 Connector Layout, Twin Leaf Mother Board 408-9119 Seating Tool, .125 x .250 [3.18 x 6.35] with Card Connector Scoops, Part No. 58184, AMP PACE Connector 408-7506 Card Guides, Twin Leaf Mother Board Connector 408-9186 Contact Replacement Tool; Rotary Cam ZIF Connectors .100 x .200 [2.54 x 5.08], .125 x .125 [3.18 x 3.18], Product Specification: .125 x .250 [3.18 x 6.35] with Scoops, 108-9048 Rotary Cam PCBoard Edge Connector .156 x .200 [3.96 x 5.08], Instruction Sheet: AMP PACE Connector 408-7911 Rotary Cam ZIF Connectors 408-9188 Seating Tool .100 x .100 [2.54 x 2.54] Part No. 58200, AMP PACE Connector Linear ZIF Connectors ECONOMATE Connectors Product Specifications: 108-14015 Linear ZIF PC Board Edge Connector, Product Specification: .100 [2.54] Centerline 108-26002 ECONOMATE Connector 108-26003 ACTION PIN Contacts Instruction Sheet: Application Specification: 408-9091 Accessories and Tooling, .100 x .200 [2.54 x 5.08] AMP PACE Connector 186 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Technical Documents (Continued) Wire-to-Board Connectors High Current Connectors Crimp Snap Twin Leaf Connectors Product Specification: 108-9045 High Current Edge Connector Product Specification: 108-9031 Crimp Snap Twin Leaf Connector Application Specification: (Bifurcated Contacts) 114-9005 Contact, High Current Edge Connector Application Specification: Instruction Sheets: 114-9004 Contact, Twin Leaf Connector 408-7782 Extraction Tool 91116-1, High Current Connector Instruction Sheets: 408-7783 Die Inserts 90332-1 and 90332-2 408-7527 Accessories and Contacts, Crimp Snap Twin 408-7802 Die Inserts 90333-1 and 90333-2 Leaf Connector 408-9123 High Current Connectors 408-7529 Extraction Tool 91073-1 408-7531 Hand Tool 90268-1, Single Crimp, 28-24 AWG DUO-TYNE Flag Connectors [0.08-0.2 mm2] Wire Product Specification: 408-7551 Hand Tool 90264-1, Double Crimp, 22-20 AWG 108-9038 DUO-TYNE Flag Connector, [0.3-0.6 mm2] and 18 AWG [0.8-0.9 mm2] Wire Tapered Beam Contact 408-7583 Hand Tool 90285-1, Double Crimp, 20-18 AWG [0.5-0.9 mm2] and 16 AWG [1.25-1.4 mm2] Wire Application Specification: 408-8547 CERTI-CRIMP II Straight Action Hand Tools 114-9002 Contact, DUO-TYNE Flag Connector AMP-LEAF Connectors Instruction Sheets: 408-7047 DUO-TYNE Flag Right-Angle Connector Product Specifications: 408-7486 On-Contact Keying Plug 583661 108-9013 AMP-LEAF Connector 408-7780 Hand Tool 90335-1, 18-16 AWG 108-9043 AMP-LEAF Connector, Tin Plated Contacts [0.8-1.4 mm2] Wire Application Specification: 408-7848 Hand Tool 90027-4, 22-18 AWG 114-9003 Contact, AMP-LEAF Connector [0.3-0.9 mm2] Wire 408-7849 Hand Tool 90094-4, 26-22 AWG Instruction Sheets: [0.12-0.4 mm2] Wire 408-6951 Lubricant for tin plating, fretting, corrosion 408-7035 Retaining Spring 42973 Printed Circuit Board Connector Hood Assemblies 408-7036 On-Contact Keying Plugs 480143 and 582756 Instruction Sheet: 408-7037 Accessories and Contacts, 408-7719 Printed Circuit Board Connector Hood Assemblies AMP-LEAF Connector 408-7045 Extraction Tool 465195 408-7068 Intercontact Keying Plug 582501 408-7339 Intercontact Keying Plug 583274 408-7419 Commoning Springs 408-7622 Hand Tool 90017-3, 22-20 AWG [0.3-0.6 mm2], Two 22 AWG [0.3-0.4 mm2] or One 18 AWG [0.8-0.9 mm2] Wire 408-7623 Hand Tool 90028-3, 26-22 AWG [0.12-0.4 mm2], Two 22 AWG [0.3-0.4 mm2] Wires 408-7624 Hand Tool 90031-8, Two 18 AWG [0.8-0.9 mm2] Wires 408-7626 Hand Tool 90101-3, 20 AWG [0.5-0.6 mm2] or Two 20 AWG [0.5-0.6 mm2] Wires 187 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number All Tyco Electronic Part Numbers without a TPyacrot Ac Pq au ri r te d Pa g e TPyacrot Ac Pq au ri r te d Pa g e corresponding acquired Part Number are listed as Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r base part numbers only. Complete part numbers (with prefixes and/or suffixes) are shown on the 119726 — 103 480110 — 165,168, page(s) indicated. 119734 — 101 169 Contact Engineering if no corresponding Tyco Number is 119736 — 101 480133 — 165,168, av a i l a b l e . 119738 — 103 169 119790 — 110 480142 — 165,168, TPyacrot Ac Pq au ri r t e d Pa g e 119791 — 103 169 Nu m b e r Nu m b e r Nu m b e r 119802 — 100,102, 480143 — 171 11299 — 9 104,106, 530002 — 178 42973 — 171 108,110, 530004 — 178 58084 — 117 111,120 530005 — 178 58140 — 115 119822 — 107 530006 — 178 58142 — 115 119831 — 101 530007 — 178 58143 — 115 119840 — 107 530030 — 72 58150 — 115 119841 — 107 530061 — 170 58184 — 115 119853 — 104 530087 — 183 58200 — 115 119880 — 105 530088 — 182 58210 — 115 119950 — 93 530213 — 162 58218 — 115 145031 — 14 530218 — 158 59881 — 112 145089 — 23 530238 — 160 60151 — 165 145098 — 9 530245 — 156 66067 — 166 145113 — 8 530265 — 72 66084 — 165 145116 — 176 530267 — 72 66092 — 171 145154 — 9 530268 — 72 69710 — 174 145165 — 10 530270 — 72 90017 — 165 145166 — 8 530278 — 72 90027 — 174 145167 — 9 530282 — 72 90028 — 165 145168 — 10 530286 — 72 90031 — 165 145169 — 8 530290 — 72 90094 — 174 145246 — 10 530291 — 72 90101 — 165 146912 — 176 530292 — 66 90264 — 155 147400 — 85 530384 — 22 90268 — 155 147668 — 129 530396 — 21 90285 — 155 176137 — 17 530505 — 178 90332 — 174 176139 — 25 530509 — 179 90333 — 174 265868 — 126 530517 — 174 91081 — 72 265871 — 95,115, 530518 — 174 91088 — 72 126 530519 — 174 91116 — 174,175 265879 — 126 530520 — 174 91535 — 155 265881 — 126 530521 — 175 98014 — 57 265902 — 126 530533 — 175 98341 — 150 265904 — 126 530654 — 62 117169 — 112,122 265905 — 126 530655 — 62 117249 — 124,126 265906 — 126 530656 — 62 117269 — 124,126 265910 — 126 530657 — 62 117272 — 126 265911 — 126 530659 — 60 117285 — 121,126 265912 — 126 530662 — 60 117296 — 121,126 265924 — 95,126 530663 — 60 117311 — 123 265931 — 126 530664 — 60 117793 — 126 265937 — 126 530666 — 62 117795 — 120,126 265962 — 126 530667 — 62 117796 — 126 266129 — 126 530668 — 62 117798 — 120,126 266220 — 115 530669 — 62 117879 — 126 266233 — 95,186 530671 — 60 117880 — 126 266235 — 95 530672 — 60 118243 — 123 266264 — 95 530673 — 60 118778 — 121 266267 — 95 530674 — 60 118951 — 120 313136 — 95 530677 — 62 118982 — 100,102, 313139 — 95 530678 — 62 104,105, 313256 — 95 530689 — 62 106,108, 343371 — 165 530825 — 21 110,111, 350396 — 21 530826 — 22 120,121 356500 — 185 530841 — 20 119136 — 123 465195 — 165 530842 — 20 119163 — 103 466366 — 165 530843 — 17 119196 — 88 466367 — 165 530844 — 18 119200 — 107 466368 — 165 530851 — 170 119202 — 107 466413 — 178 530853 — 179 119216 — 103 466424 — 178 531004 — 80 119216 — 103 466438 — 174 531007 — 78 119237 — 101 466439 — 174 531019 — 74 119254 — 110 466577 — 155 531020 — 74 119256 — 110 466586 — 178 531021 — 74 119311 — 88 466622 — 155 531023 — 77 119341 — 112 466713 — 155 531024 — 77 119413 — 101 466912 — 155 531025 — 78 119552 — 105 466919 — 155 531026 — 78 119677 — 103 466928 — 155 531250 — 22,162 188 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco Ac q u i r e d Tyco Ac q u i r e d Tyco Ac q u i r e d Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r 531341 — 20 583723 — 165,167 0-1437261-2 C8D50PF29023 138 531353 — 176 583724 — 165,167 0-1437261-5 C8D50PF29033 138 531369 — 175 583725 — 165,167 0-1437261-6 C8D50PF29043 140 531370 — 175 583726 — 165,167 0-1437262-4 C6D06PF29013 148 531373 — 174,175 583752 — 72 0-1437262-5 C6D06PF29043 148 531395 — 75 583753 — 72 0-1437262-6 C6D10PF29022 146 531395 — 75 583754 — 72 0-1437262-7 C6D10PF29043 148 531396 — 75 583755 — 72 0-1437262-9 C6D15PF29022 146 531414 — 76 583760 — 171 0-1437263-7 C7D06PF29023 142 531433 — 62 583764 — 162 0-1437263-8 C7D06PF29043 144 531476 — 155 583853 — 155 0-1437264-3 C1D18PF29015 131 531477 — 155 583854 — 156 0-1437264-6 C1D20PF29015 131 531478 — 155 583857 — 162 0-1437264-7 C1D20PF29043 131 531534 — 66 583859 — 161 0-1437264-9 C1D25PF29013 131 531863 — 79 583861 — 157 0-1437267-5 A6D06DS29A3 54 532563 — 79 583864 — 159 0-1437267-6 A6D10DS29A2 54 532600 — 23 583873 — 159 0-1437267-7 A6D10DS29C2 54 536128 — 25 583875 — 155 0-1437267-8 A6D10DS29C3 54 582140 — 165,168 583879 — 156 0-1437267-9 A6D10RA29A 56 582147 — 165,168 583884 — 156 0-1437268-4 A7D06DS29C2 49 582264 — 165,168 583900 — 158 0-1437268-5 A7D06RA29C 52 582355 — 166 583975 — 170 0-1437268-6 A7D06RA29E 52 582370 — 179 583989 — 165 0-1437268-7 A7D10DS29C2 49 582371 — 179 583990 — 165 0-1437268-8 A7D10RA29AM231 51 582372 — 179 583991 — 165 0-1437268-9 A7D10WW29A3 49 582375 — 179 645115 — 87 0-1437270-1 A8D31DS29B3 43 582376 — 179 645116 — 91 0-1437270-2 A8D31DS29C2 43 582377 — 179 645135 — 84 0-1437270-3 A8D31DS29D2 43 582378 — 179 645142 — 92 0-1437270-4 A8D31RA29A 46 582379 — 179 645145 — 85 0-1437270-6 A8D31RA29C 46 582380 — 179 645146 — 89 0-1437270-7 A8D31RA29CM233 47 582382 — 179 645147 — 86 0-1437270-8 A8D31RA29E 46 582383 — 179 645149 — 90 0-1437270-9 A8D31RA29F 46 582384 — 179 645155 — 66 0-1437274-3 C7D06DS29C1 36 582385 — 179 645169 — 25 0-1437274-5 C7D15DS29C1 36 582386 — 179 645200 — 176 0-1437274-7 C7D15DS29C3 36 582387 — 179 645235 — 24 0-1437274-8 C7D18DS29C3 36 582388 — 179 645293 — 80,82 0-1437274-9 C7D22DS29C1 36 582500 — 165,168, 645384 — 23 0-1437276-2 C8D31DS29A3 32 169 645394 — 105 0-1437276-3 C8D31DS29C1 31 582501 — 171 650025 — 17,18, 0-1437276-5 C8D31DS29C2 31 582963 — 165,168 20,21, 0-1437276-6 C8D31DS29C3 32 583167 — 165,168 22,23, 0-1437276-8 C8D31DS29D1 31 583204 — 165 24,25, 0-1437276-9 C8D31DS29D3 32 583274 — 162,171 63 1-1437260-4 C8D06PF29013 140 583280 — 165,168 650059 — 109 1-1437260-5 C8D06PF29043 140 583294 — 166 650083 — 79 1-1437261-1 C8D60PF29023 138 583361 — 165 650090 — 12 1-1437262-0 C6D15PF29023 146 583407 — 66,72 650091 — 13 1-1437262-3 C6D18PF29013 148 583425 — 71 650092 — 12 1-1437262-4 C6D18PF29023 146 583454 — 171 650118 — 23 1-1437262-8 C6D22PF29013 148 583458 — 170 650122 — 103 1-1437262-9 C6D22PF29023 146 583485 — 66,72 650123 — 103 1-1437263-4 C7D18PF29012 144 583486 — 66,72 650124 — 103 1-1437263-5 C7D18PF29013 144 583533 — 66,72 650148 — 117 1-1437263-6 C7D18PF29022 142 583544 — 170 650149 — 117 1-1437263-7 C7D18PF29023 142 583545 — 170 650150 — 117 1-1437263-8 C7D18PF29043 144 583552 — 167 650181 — 12 1-1437263-9 C7D20PF29012 144 583555 — 165 650187 — 23 1-1437264-0 C1D25PF29015 131 583599 — 170 650207 — 18 1-1437264-5 C1D35PF29013 131 583616 — 155 650263 — 17 1-1437264-6 C1D35PF29015 131 583617 — 165,167 650281 — 117 1-1437265-0 W8D18PF29063 136 583649 — 155 650297 — 103 1-1437265-2 W8D22PF29043 134 583660 — 68,72 650616 — 25 1-1437265-3 W8D25PF29013 134 583661 — 179 650718 — 20 1-1437265-4 W8D25PF29063 136 583671 — 70 650719 — 14 1-1437265-5 W8D25PF29093 136 583679 — 68,72 650728 — 19 1-1437265-6 W8D28PF29013 134 583680 — 165,167 678034 — 107 1-1437265-7 W8D28PF29093 136 583685 — 165,167 678035 — 111 1-1437266-0 98230 150 583691 — 162 687775 — 155 1-1437266-1 98231 150 583692 — 68,72 810992 — 178 1-1437266-6 98236 150 583694 — 66 1320420 — 185 1-1437266-8 98238 150 583714 — 72 1338600 — 184 1-1437267-0 A6D10RA29AM233 56 583715 — 68,72 1437266 — 151 1-1437267-1 A6D10RA29C 56 583717 — 157 1490560 — 150 1-1437267-2 A6D10RA29E 56 583718 — 157 1490563 — 150 1-1437267-3 A6D10WW29A3 54 583722 — 165,167 1571235 — 109 1-1437267-4 A6D12DS29C2 54 189 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco Ac q u i r e d Tyco Ac q u i r e d Tyco Ac q u i r e d Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r 1-1437267-5 A6D12RA29A 54 2-1437263-8 C7D28PF29013 144 3-1437260-8 C8D22PF29013 140 1-1437267-6 A6D12WW29A3 54 2-1437263-9 C7D28PF29023 142 3-1437262-3 C6D36PF29013 148 1-1437267-7 A6D15DS29A2 54 2-1437264-2 C1D50PF29013 131 3-1437262-4 C6D36PF29023 146 1-1437267-9 A6D15DS29C2 54 2-1437264-3 C1D50PF29015 131 3-1437262-6 C6D43PF29013 148 1-1437268-1 A7D15DS29A2 49 2-1437264-4 C1D50PF29017 132 3-1437262-8 C6D43PF29022 146 1-1437268-2 A7D15DS29C2 49 2-1437265-0 W8D30PF29013 134 3-1437262-9 C6D43PF29023 146 1-1437268-3 A7D15RA29C 52 2-1437265-1 W8D30PF29043 134 3-1437263-1 C7D30PF29013 144 1-1437268-4 A7D15RA29E 52 2-1437265-3 W8D35PF29013 134 3-1437263-2 C7D30PF29023 142 1-1437268-5 A7D15WW29A3 49 2-1437265-5 W8D35PF29063 136 3-1437263-3 C7D30PF29043 144 1-1437268-6 A7D18DS29A2 49 2-1437265-6 W8D36PF29013 134 3-1437263-9 C7D35PF29012 144 1-1437268-7 A7D18DS29B2 49 2-1437265-7 W8D36PF29043 134 3-1437264-3 C6D36DS29C3 39 1-1437268-8 A7D18WW29A3 49 2-1437265-8 W8D36PF29093 136 3-1437264-4 C9D020PF60048 129 1-1437268-9 A7D22DS29C2 49 2-1437267-0 A6D15RA29E 56 3-1437264-5 C9D030PF60048 129 1-1437269-9 A8D10DS29A2 43 2-1437267-1 A6D15WW29A3 54 3-1437264-6 C9D060PF60048 129 1-1437270-0 A8D31WW29A3 44 2-1437267-2 A6D18DS29A2 54 3-1437265-0 W8D40PF29013 134 1-1437270-2 A8D35DS29A2 43 2-1437267-3 A6D18DS29C2 54 3-1437265-4 W8D50PF29012 134 1-1437270-3 A8D35DS29C2 43 2-1437267-4 A6D18RA29A 56 3-1437265-5 W8D50PF29013 134 1-1437270-4 A8D35RA29C 46 2-1437267-5 A6D18WW29A3 54 3-1437265-6 W8D50PF29043 134 1-1437270-5 A8D35WW29A3 44 2-1437267-7 A6D22DS29A2 54 3-1437265-7 W8D50PF29062 136 1-1437270-6 A8D36DS29A2 43 2-1437267-8 A6D22DS29B2 54 3-1437265-9 W8D60PF29013 134 1-1437270-7 A8D36DS29B3 43 2-1437267-9 A6D22DS29C2 54 3-1437266-5 98336 150 1-1437270-8 A8D36DS29C2 43 2-1437268-1 A7D25DS29A2 49 3-1437266-9 9836701 151 1-1437270-9 A8D36DS29C3 43 2-1437268-2 A7D25RA29FM232 51 3-1437267-0 A6D22RA29A 56 1-1437273-3 C6D06DS29A1 39 2-1437268-3 A7D28DS29A2 49 3-1437267-1 A6D22RA29C 56 1-1437273-4 C6D06DS29C1 39 2-1437268-4 A7D28DS29B2 49 3-1437267-2 A6D22WW29A3 54 1-1437273-5 C6D06DS29C3 39 2-1437268-5 A7D28DS29C2 49 3-1437267-4 A6D25DS29C2 54 1-1437273-6 C6D06DS29D1 39 2-1437268-8 A7D28RA29AM231 51 3-1437267-5 A6D28DS29A2 54 1-1437273-7 C6D06DS29D3 39 2-1437268-9 A7D28RA29C 52 3-1437267-6 A6D28DS29C2 54 1-1437273-8 C6D06DS29D4 40 2-1437269-0 A8D10DS29C2 43 3-1437267-7 A6D28RA29A 56 1-1437273-9 C6D10DS29A1 39 2-1437269-1 A8D10RA29A 46 3-1437267-8 A6D28RA29C 56 1-1437274-0 C7D22DS29D3 36 2-1437269-2 A8D10RA29C 46 3-1437267-9 A6D28RA29E 56 1-1437274-1 C7D25DS29C1 36 2-1437269-3 A8D10RA29CM233 47 3-1437268-0 A7D28RA29CM232 51 1-1437274-3 C7D28DS29A1 36 2-1437269-4 A8D10RA29E 46 3-1437268-1 A7D28RA29E 52 1-1437274-4 C7D28DS29A3 36 2-1437269-5 A8D10WW29A3 44 3-1437268-2 A7D28RA29EM231 51 1-1437274-6 C7D28DS29B3 36 2-1437269-7 A8D12DS29A2 43 3-1437268-3 A7D28WW29A3 49 1-1437274-7 C7D28DS29C1 36 2-1437269-8 A8D12DS29C2 43 3-1437268-4 A7D30DS29A2 49 1-1437274-8 C7D28DS29C3 36 2-1437269-9 A8D12RA29C 46 3-1437268-5 A7D30DS29C2 49 1-1437274-9 C7D28DS29D1 36 2-1437270-0 A8D36RA29A 46 3-1437268-6 A7D30RA29AM231 51 1-1437276-0 C8D35DS29A1 31 2-1437270-1 A8D36RA29C 46 3-1437268-7 A7D30WW29A3 49 1-1437276-1 C8D35DS29A3 32 2-1437270-2 A8D36RA29E 46 3-1437268-8 A7D35DS29A2 49 1-1437276-3 C8D35DS29C3 32 2-1437270-3 A8D36RA29EM233 47 3-1437268-9 A7D35DS29C2 49 1-1437276-4 C8D35DS29E3 32 2-1437270-4 A8D36WW29A3 44 3-1437269-0 A8D12RA29E 46 1-1437276-5 C8D36DS29A3 32 2-1437270-6 A8D40DS29A3 43 3-1437269-1 A8D12RA29EM233 47 1-1437276-6 C8D36DS29C1 31 2-1437270-7 A8D40DS29C2 43 3-1437269-2 A8D12WW29A3 44 1-1437276-8 C8D36DS29C2 31 2-1437270-8 A8D40RA29E 46 3-1437269-8 A8D15DS29A2 43 1-1437276-9 C8D36DS29C3 32 2-1437270-9 A8D40WW29A3 44 3-1437269-9 A8D15DS29C2 43 1437260-4 9820302 151 2-1437273-0 C6D10DS29B3 39 3-1437270-0 A8D43DS29C2 43 1437260-5 9820305 151 2-1437273-1 C6D10DS29C1 39 3-1437270-1 A8D43RA29A 46 1437260-6 9836301 151 2-1437273-2 C6D10DS29C4 40 3-1437270-2 A8D43RA29C 46 1437260-7 9836702 151 2-1437273-3 C6D12DS29A4 40 3-1437270-3 A8D43RA29E 46 1437266-3 9818002 151 2-1437273-4 C6D12DS29C1 39 3-1437270-4 A8D43WW29A3 44 1437266-4 9818004 151 2-1437273-5 C6D12DS29C3 39 3-1437270-5 A8D44DS29A2 43 1437266-5 9818005 151 2-1437273-6 C6D15DS29A1 39 3-1437270-6 A8D44DS29C2 43 1437266-6 9820301 151 2-1437273-7 C6D15DS29B3 39 3-1437270-7 A8D44DS29C3 44 1437266-7 9820401 151 2-1437273-8 C6D15DS29C1 39 3-1437270-8 A8D44RA29CM233 47 1437266-8 98206 150 2-1437273-9 C6D15DS29C3 39 3-1437270-9 A8D50DS29A2 43 1437266-9 98224 150 2-1437274-0 C7D28DS29D3 36 3-1437273-0 C6D15DS29D1 39 1437274-1 98293 150 2-1437274-2 C7D28DS29E3 36 3-1437273-1 C6D15DS29D3 39 2-1437260-0 C8D10PF29013 140 2-1437274-3 C7D28PF29032 142 3-1437273-2 C6D18DS29A1 39 2-1437260-2 C8D10PF29023 138 2-1437274-4 C7D30DS29A3 36 3-1437273-3 C6D18DS29A3 39 2-1437260-3 C8D10PF29043 140 2-1437274-5 C7D30DS29C3 36 3-1437273-4 C6D18DS29C1 39 2-1437260-4 C8D12PF29013 140 2-1437274-6 C7D30DS29C4 37 3-1437273-5 C6D22DS29A1 39 2-1437260-5 C8D12PF29023 138 2-1437274-7 C7D30PF29032 142 3-1437273-6 C6D22DS29A3 39 2-1437260-6 C8D12PF29043 140 2-1437274-8 C7D31DS29A3 36 3-1437273-7 C6D22DS29B4 40 2-1437260-7 C8D15PF29013 140 2-1437274-9 C7D31DS29C3 36 3-1437273-8 C6D22DS29C1 39 2-1437260-9 C8D15PF29023 138 2-1437275-9 C8D06DS29C1 31 3-1437273-9 C6D22DS29D1 39 2-1437262-0 C6D22PF29043 148 2-1437276-0 C8D36DS29D1 31 3-1437274-0 C7D31DS29D3 36 2-1437262-4 C6D28PF29013 148 2-1437276-1 C8D36DS29D2 31 3-1437274-1 C7D35DS29C1 36 2-1437262-6 C6D28PF29023 146 2-1437276-2 C8D36DS29D3 32 3-1437274-2 C7D36DS29C1 36 2-1437262-7 C6D28PF29033 146 2-1437276-3 C8D36DS29E3 32 3-1437274-3 C7D36DS29C3 36 2-1437262-8 C6D28PF29043 148 2-1437276-5 C8D40DS29A1 31 3-1437274-4 C7D36DS29D3 36 2-1437262-9 C6D30PF29023 146 2-1437276-6 C8D40DS29A3 32 3-1437274-6 C7D40DS29C1 36 2-1437263-0 C7D20PF29013 144 2-1437276-7 C8D40DS29C1 31 3-1437274-7 C7D40DS29C3 36 2-1437263-1 C7D20PF29023 142 2-1437276-9 C8D40DS29C3 32 3-1437274-8 C7D40DS29D3 36 2-1437263-3 C7D22PF29013 144 3-1437260-0 C8D15PF29043 140 3-1437274-9 C7D43DS29C1 36 2-1437263-4 C7D22PF29023 142 3-1437260-5 C8D20PF29023 138 3-1437275-0 C8D06DS29C2 31 2-1437263-7 C7D28PF29012 144 3-1437260-6 C8D20PF29043 140 3-1437275-1 C8D06DS29C3 32 190 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco Ac q u i r e d Tyco Ac q u i r e d Tyco Ac q u i r e d Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r 3-1437275-2 C8D06DS29E1 31 4-1437274-8 C7D50DS29D3 36 6-1437260-9 C8D31PF29133 140 3-1437275-5 C8D10DS29A3 32 4-1437275-0 C8D10DS29D1 31 6-1437268-0 A7D50RA29A 52 3-1437275-6 C8D10DS29C1 31 4-1437275-1 C8D10DS29D3 32 6-1437268-1 A7D50WW29A3 49 3-1437275-8 C8D10DS29C2 31 4-1437275-5 C8D12DS29C1 31 6-1437268-2 A7D50WW29B3 49 3-1437275-9 C8D10DS29C3 32 4-1437275-7 C8D12DS29C3 32 6-1437269-0 A8D20WW29A3 44 3-1437276-0 C8D40DS29D1 31 4-1437275-8 C8D12DS29D1 31 6-1437269-1 A8D22DS29A2 43 3-1437276-1 C8D40DS29D3 32 4-1437276-0 C8D50DS29C1 31 6-1437269-2 A8D22DS29C2 43 3-1437276-2 C8D43DS29C1 31 4-1437276-2 C8D50DS29C3 32 6-1437269-4 A8D22RA29A 46 3-1437276-3 C8D43DS29C3 32 4-1437276-3 C8D50DS29D1 31 6-1437269-5 A8D22RA29C 46 3-1437276-4 C8D43DS29D3 32 4-1437276-6 C8D52DS29C1M191 29 6-1437269-6 A8D22RA29E 46 3-1437276-5 C8D43DS29E1 31 4-1437276-7 C8D52DS29C1M195 29 6-1437269-7 A8D22RA29EM233 47 3-1437276-8 C8D50DS29A1 31 5-1437260-5 C8D28PF29023 138 6-1437269-8 A8D22WW29A3 44 3-1437276-9 C8D50DS29A3 32 5-1437260-6 C8D30PF29013 140 6-1437269-9 A8D25DS29A2 43 4-1437260-0 C8D22PF29023 138 5-1437260-8 C8D30PF29023 138 6-1437270-0 A8D65DS29D2 43 4-1437260-1 C8D22PF29043 140 5-1437263-0 C7D43PF29013 144 6-1437270-6 A8D28RA29C 46 4-1437260-5 C8D25PF29013 140 5-1437263-1 C7D50DS29B3 36 6-1437273-0 C6D43DS29A4 40 4-1437260-8 C8D25PF29023 138 5-1437263-2 C7D50PF29013 144 6-1437273-1 C6D43DS29B1 39 4-1437260-9 C8D25PF29033 138 5-1437263-3 C7D50PF29033 142 6-1437273-2 C6D43DS29C1 39 4-1437262-0 C6D43PF29043 148 5-1437263-4 C7D50PF29043 144 6-1437273-4 C6D43DS29C3 39 4-1437263-0 C7D35PF29013 144 5-1437263-7 C7D50PF29143 142 6-1437273-6 C6D43DS29D3 39 4-1437263-1 C7D36PF29012 144 5-1437267-0 A6D43DS29C3 54 6-1437275-1 C8D18DS29C3 32 4-1437263-2 C7D36PF29013 144 5-1437267-1 A6D43RA29AM233 56 6-1437275-2 C8D18DS29D1 31 4-1437263-3 C7D36PF29033 142 5-1437267-2 A6D43RA29C 56 6-1437275-3 C8D18DS29D3 32 4-1437263-4 C7D40PF29012 144 5-1437267-3 A6D43RA29E 56 6-1437275-4 C8D18DS29E1 31 4-1437263-5 C7D40PF29013 144 5-1437267-4 A6D43WW29A3 54 6-1437275-6 C8D20DS29C1 31 4-1437263-6 C7D40PF29023 142 5-1437268-0 A7D40WW29B3 49 6-1437275-8 C8D20DS29C3 32 4-1437263-7 C7D40PF29032 142 5-1437268-2 A7D43DS29A2 49 6-1437275-9 C8D20DS29D1 31 4-1437263-8 C7D40PF29043 144 5-1437268-3 A7D43DS29C2 49 7-1437260-3 C8D35PF29023 138 4-1437267-0 A6D28RA29EM233 56 5-1437268-4 A7D43WW29A3 49 7-1437260-7 C8D36PF29013 140 4-1437267-1 A6D28WW29A3 54 5-1437268-5 A7D50DS29A2 49 7-1437260-9 C8D36PF29022 138 4-1437267-2 A6D36DS29A2 54 5-1437268-6 A7D50DS29C2 49 7-1437269-0 A8D25DS29B2 43 4-1437267-3 A6D36DS29A3 54 5-1437268-8 A7D50DS29D2 49 7-1437269-1 A8D25DS29C2 43 4-1437267-4 A6D36DS29C2 54 5-1437269-0 A8D18DS29C3 43 7-1437269-2 A8D25DS29C3 43 4-1437267-5 A6D36RA29E 56 5-1437269-1 A8D18RA29C 46 7-1437269-3 A8D25RA29A 46 4-1437267-6 A6D36WW29A3 54 5-1437269-2 A8D18RA29CM233 47 7-1437269-4 A8D25RA29AM233 47 4-1437267-7 A6D43DS29A2 54 5-1437269-3 A8D18RA29FM233 47 7-1437269-5 A8D25RA29C 46 4-1437267-8 A6D43DS29A3 54 5-1437269-4 A8D18WW29A3 44 7-1437269-6 A8D25RA29CM233 47 4-1437267-9 A6D43DS29C2 54 5-1437269-6 A8D20DS29B2 43 7-1437269-7 A8D25RA29E 46 4-1437268-0 A7D35RA29A 52 5-1437269-7 A8D20DS29C2 43 7-1437269-8 A8D25RA29FM233 47 4-1437268-1 A7D36DS29A2 49 5-1437269-8 A8D20RA29C 46 7-1437269-9 A8D25WW29A3 44 4-1437268-2 A7D36DS29C2 49 5-1437269-9 A8D20RA29E 46 7-1437275-0 C8D20DS29D3 32 4-1437268-3 A7D36RA29AM232 51 5-1437270-1 A8D60DS29A2 43 7-1437275-1 C8D22DS29A1 31 4-1437268-4 A7D36WW29A3 49 5-1437270-2 A8D60DS29C2 43 7-1437275-2 C8D22DS29A3 32 4-1437268-6 A7D40DS29C2 49 5-1437270-3 A8D60DS29C3 44 7-1437275-3 C8D22DS29B1 31 4-1437268-8 A7D40RA29E 52 5-1437270-5 A8D60RA29A 46 7-1437275-4 C8D22DS29C1 31 4-1437268-9 A7D40WW29A3 49 5-1437270-6 A8D60WW29A3 44 7-1437275-6 C8D22DS29C3 32 4-1437269-0 A8D15DS29D2 43 5-1437270-9 A8D65DS29C2 43 7-1437275-7 C8D22DS29D1 31 4-1437269-1 A8D15RA29C 46 5-1437273-0 C6D30DS29D3 39 7-1437275-8 C8D25DS29A1 31 4-1437269-2 A8D15RA29CM233 47 5-1437273-1 C6D30DS29D4 40 7-1437275-9 C8D25DS29A3 32 4-1437269-3 A8D15RA29E 46 5-1437273-2 C6D31DS29A1 39 8-1437260-0 C8D36PF29023 138 4-1437269-4 A8D15RA29EM233 47 5-1437273-3 C6D36DS29A3 39 8-1437260-1 C8D36PF29033 138 4-1437269-5 A8D15RA29FM233 47 5-1437273-4 C6D36DS29C1 39 8-1437260-2 C8D36PF29043 140 4-1437269-6 A8D15WW29A3 44 5-1437273-5 C6D36DS29D1 39 8-1437260-4 C8D40PF29023 138 4-1437269-8 A8D18DS29A2 43 5-1437273-6 C6D36DS29D4 40 8-1437260-6 C8D40PF29043 140 4-1437269-9 A8D18DS29C2 43 5-1437273-7 C6D36DS29E4 40 8-1437260-9 C8D43PF29012 140 4-1437270-0 A8D50DS29C2 43 5-1437273-8 C6D40DS29B3 39 8-1437269-1 A8D28DS29A2 43 4-1437270-1 A8D50DS29C3 44 5-1437273-9 C6D43DS29A1 39 8-1437269-2 A8D28DS29C2 43 4-1437270-2 A8D50DS29D2 43 5-1437274-0 C7D50DS29E1 36 8-1437269-3 A8D28RA29E 46 4-1437270-4 A8D50RA29C 46 5-1437274-1 C8D12DS29E1 31 8-1437269-5 A8D30DS29A2 43 4-1437270-5 A8D50RA29E 46 5-1437275-1 C8D15DS29B3 32 8-1437269-6 A8D30DS29B2 43 4-1437270-6 A8D50RA29F 46 5-1437275-2 C8D15DS29C1 31 8-1437269-7 A8D30DS29C2 43 4-1437270-7 A8D50WW29A3 44 5-1437275-4 C8D15DS29C3 32 8-1437269-9 A8D30DS29C3 43 4-1437273-0 C6D22DS29D3 39 5-1437275-5 C8D15DS29D1 31 8-1437275-0 C8D25DS29C1 31 4-1437273-1 C6D25DS29A3 39 5-1437275-6 C8D15DS29D2 31 8-1437275-2 C8D25DS29C3 32 4-1437273-2 C6D25DS29C3 39 5-1437275-9 C8D18DS29C1 31 8-1437275-3 C8D25DS29D1 31 4-1437273-3 C6D25DS29D1 39 5-1437276-1 C8D60DS29A1 31 8-1437275-4 C8D25DS29D3 32 4-1437273-4 C6D28DS29C1 39 5-1437276-2 C8D60DS29A3 32 8-1437275-5 C8D28DS29C1 31 4-1437273-6 C6D28DS29C3 39 5-1437276-3 C8D60DS29B3 32 8-1437275-8 C8D28DS29C3 32 4-1437273-7 C6D28DS29D1 39 5-1437276-4 C8D60DS29C1 31 8-1437275-9 C8D28DS29D1 31 4-1437273-8 C6D30DS29C1 39 5-1437276-7 C8D60DS29D1 31 9-1437260-0 C8D43PF29013 140 4-1437273-9 C6D30DS29C3 39 5-1437276-8 C8D60PF29013 140 9-1437260-2 C8D43PF29022 138 4-1437274-0 C7D43DS29C3 36 6-1437260-1 C8D30PF29043 140 9-1437260-3 C8D43PF29023 138 4-1437274-1 C7D43DS29D4 37 6-1437260-4 C8D30PF29133 140 9-1437260-9 C8D50PF29013 140 4-1437274-3 C7D50DS29A3 36 6-1437260-5 C8D31PF29013 140 9-1437269-0 A8D30DS29D2 43 4-1437274-4 C7D50DS29C1 36 6-1437260-6 C8D31PF29023 138 9-1437269-1 A8D30DS29D2 43 4-1437274-5 C7D50DS29C3 36 6-1437260-7 C8D31PF29043 140 9-1437269-2 A8D30RA29C 46 4-1437274-6 C7D50DS29C4 37 6-1437260-8 C8D31PF29132 140 9-1437269-3 A8D30RA29E 46 191 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco Ac q u i r e d Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r 9-1437269-4 A8D30WW29A3 44 9-1437269-5 A8D30WW29B3 44 9-1437269-8 A8D31DS29A2 43 9-1437269-9 A8D31DS29A3 43 9-1437275-0 C8D28DS29D3 32 9-1437275-1 C8D28PF29012 140 9-1437275-3 C8D30DS29C1 31 9-1437275-5 C8D30DS29C3 32 9-1437275-6 C8D30DS29D1 31 9-1437275-7 C8D30DS29D3 32 9-1437275-8 C8D30DS29E1 31 9-1437275-9 C8D30DS29E3 32 AP3 — 149 BMEP 1K/2K — 149 BMEP 3T/5T — 149 MEP 6T/12T — 149 Model G — 184 SAHT — 185 192 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r 98 2 0 6 14 3 7 2 6 6 - 8 15 0 A6 D 1 8 D S 2 9 B 3 — 54 A6 D 4 3 D S 2 9 B 3 — 54 98 2 2 4 14 3 7 2 6 6 - 9 15 0 A6 D 1 8 D S 2 9 C 2 2- 1 4 3 7 2 6 7 - 3 54 A6 D 4 3 D S 2 9 C 2 4- 1 4 3 7 2 6 7 - 9 54 98 2 3 0 1- 1 4 3 7 2 6 6 - 0 15 0 A6 D 1 8 D S 2 9 C 3 — 54 A6 D 4 3 D S 2 9 C 3 5- 1 4 3 7 2 6 7 - 0 54 98 2 3 1 1- 1 4 3 7 2 6 6 - 1 15 0 A6 D 1 8 R A 2 9 A 2- 1 4 3 7 2 6 7 - 4 56 A6 D 4 3 R A 2 9 A — 56 98 2 3 6 1- 1 4 3 7 2 6 6 - 6 15 0 A6 D 1 8 R A 2 9 A M 2 3 3 — 56 A6 D 4 3 R A 2 9 A M 2 3 3 5- 1 4 3 7 2 6 7 - 1 56 98 2 3 8 1- 1 4 3 7 2 6 6 - 8 15 0 A6 D 1 8 R A 2 9 C — 56 A6 D 4 3 R A 2 9 C 5- 1 4 3 7 2 6 7 - 2 56 98 2 9 3 14 3 7 2 7 4 - 1 15 0 A6 D 1 8 R A 2 9 C M 2 3 3 — 56 A6 D 4 3 R A 2 9 C M 2 3 3 — 56 98 3 3 6 3- 1 4 3 7 2 6 6 - 5 15 0 A6 D 1 8 R A 2 9 E — 56 A6 D 4 3 R A 2 9 E 5- 1 4 3 7 2 6 7 - 3 56 98 1 8 0 0 1 — 15 1 A6 D 1 8 R A 2 9 E M 2 3 3 — 56 A6 D 4 3 R A 2 9 E M 2 3 3 — 56 98 1 8 0 0 2 14 3 7 2 6 6 - 3 15 1 A6 D 1 8 R A 2 9 F — 56 A6 D 4 3 R A 2 9 F — 56 98 1 8 0 0 3 — 15 1 A6 D 1 8 R A 2 9 F M 2 3 3 — 56 A6 D 4 3 R A 2 9 F M 2 3 3 — 56 98 1 8 0 0 4 14 3 7 2 6 6 - 4 15 1 A6 D 1 8 W W 2 9 A 3 2- 1 4 3 7 2 6 7 - 5 54 A6 D 4 3 W W 2 9 A 3 5- 1 4 3 7 2 6 7 - 4 54 98 1 8 0 0 5 14 3 7 2 6 6 - 5 15 1 A6 D 1 8 W W 2 9 B 3 — 54 A6 D 4 3 W W 2 9 B 3 — 54 98 2 0 3 0 1 14 3 7 2 6 6 - 6 15 1 A6 D 2 2 D S 2 9 A 2 2- 1 4 3 7 2 6 7 - 7 54 A7 D 0 6 D S 2 9 A 2 — 49 98 2 0 3 0 2 14 3 7 2 6 0 - 4 15 1 A6 D 2 2 D S 2 9 A 3 — 54 A7 D 0 6 D S 2 9 B 2 — 49 98 2 0 3 0 3 — 15 1 A6 D 2 2 D S 2 9 B 2 2- 1 4 3 7 2 6 7 - 8 54 A7 D 0 6 D S 2 9 C 2 0- 1 4 3 7 2 6 8 - 4 49 98 2 0 3 0 5 14 3 7 2 6 0 - 5 15 1 A6 D 2 2 D S 2 9 B 3 — 54 A7 D 0 6 D S 2 9 D 2 — 49 98 2 0 4 0 1 14 3 7 2 6 6 - 7 15 1 A6 D 2 2 D S 2 9 C 2 2- 1 4 3 7 2 6 7 - 9 54 A7 D 0 6 D S 2 9 E 2 — 49 98 3 6 3 0 1 14 3 7 2 6 0 - 6 15 1 A6 D 2 2 D S 2 9 C 3 — 54 A7 D 0 6 R A 2 9 A — 52 98 3 6 7 0 1 3- 1 4 3 7 2 6 6 - 9 15 1 A6 D 2 2 R A 2 9 A 3- 1 4 3 7 2 6 7 - 0 56 A7 D 0 6 R A 2 9 A M 2 3 1 — 51 98 3 6 7 0 2 14 3 7 2 6 0 - 7 15 1 A6 D 2 2 R A 2 9 A M 2 3 3 — 56 A7 D 0 6 R A 2 9 A M 2 3 2 — 51 A6 D 0 6 D S 2 9 A 2 — 54 A6 D 2 2 R A 2 9 C 3- 1 4 3 7 2 6 7 - 1 56 A7 D 0 6 R A 2 9 C 0- 1 4 3 7 2 6 8 - 5 52 A6 D 0 6 D S 2 9 A 3 0- 1 4 3 7 2 6 7 - 5 54 A6 D 2 2 R A 2 9 C M 2 3 3 — 56 A7 D 0 6 R A 2 9 C M 2 3 1 — 51 A6 D 0 6 D S 2 9 B 2 — 54 A6 D 2 2 R A 2 9 E — 56 A7 D 0 6 R A 2 9 C M 2 3 2 — 51 A6 D 0 6 D S 2 9 B 3 — 54 A6 D 2 2 R A 2 9 E M 2 3 3 — 56 A7 D 0 6 R A 2 9 E 0- 1 4 3 7 2 6 8 - 6 52 A6 D 0 6 D S 2 9 C 2 — 54 A6 D 2 2 R A 2 9 F — 56 A7 D 0 6 R A 2 9 E M 2 3 1 — 51 A6 D 0 6 D S 2 9 C 3 — 54 A6 D 2 2 R A 2 9 F M 2 3 3 — 56 A7 D 0 6 R A 2 9 E M 2 3 2 — 51 A6 D 0 6 R A 2 9 A — 56 A6 D 2 2 W W 2 9 A 3 3- 1 4 3 7 2 6 7 - 2 54 A7 D 0 6 R A 2 9 F — 52 A6 D 0 6 R A 2 9 A M 2 3 3 — 56 A6 D 2 2 W W 2 9 B 3 — 54 A7 D 0 6 R A 2 9 F M 2 3 1 — 51 A6 D 0 6 R A 2 9 C — 56 A6 D 2 5 D S 2 9 A 2 — 54 A7 D 0 6 R A 2 9 F M 2 3 2 — 51 A6 D 0 6 R A 2 9 C M 2 3 3 — 56 A6 D 2 5 D S 2 9 A 3 — 54 A7 D 0 6 W W 2 9 A 3 — 49 A6 D 0 6 R A 2 9 E — 56 A6 D 2 5 D S 2 9 B 2 — 54 A7 D 0 6 W W 2 9 B 3 — 49 A6 D 0 6 R A 2 9 E M 2 3 3 — 56 A6 D 2 5 D S 2 9 B 3 — 54 A7 D 1 0 D S 2 9 A 2 — 49 A6 D 0 6 R A 2 9 F — 56 A6 D 2 5 D S 2 9 C 2 3- 1 4 3 7 2 6 7 - 4 54 A7 D 1 0 D S 2 9 B 2 — 49 A6 D 0 6 R A 2 9 F M 2 3 3 — 56 A6 D 2 5 D S 2 9 C 3 — 54 A7 D 1 0 D S 2 9 C 2 0- 1 4 3 7 2 6 8 - 7 49 A6 D 0 6 W W 2 9 A 3 — 54 A6 D 2 5 R A 2 9 A — 56 A7 D 1 0 D S 2 9 D 2 — 49 A6 D 0 6 W W 2 9 B 3 — 54 A6 D 2 5 R A 2 9 A M 2 3 3 — 56 A7 D 1 0 D S 2 9 E 2 — 49 A6 D 1 0 D S 2 9 A 2 0- 1 4 3 7 2 6 7 - 6 54 A6 D 2 5 R A 2 9 C — 56 A7 D 1 0 R A 2 9 A — 52 A6 D 1 0 D S 2 9 A 3 — 54 A6 D 2 5 R A 2 9 C M 2 3 3 — 56 A7 D 1 0 R A 2 9 A M 2 3 1 0- 1 4 3 7 2 6 8 - 8 51 A6 D 1 0 D S 2 9 B 2 — 54 A6 D 2 5 R A 2 9 E — 56 A7 D 1 0 R A 2 9 A M 2 3 2 — 51 A6 D 1 0 D S 2 9 B 3 — 54 A6 D 2 5 R A 2 9 E M 2 3 3 — 56 A7 D 1 0 R A 2 9 C — 52 A6 D 1 0 D S 2 9 C 2 0- 1 4 3 7 2 6 7 - 7 54 A6 D 2 5 R A 2 9 F — 56 A7 D 1 0 R A 2 9 C M 2 3 1 — 51 A6 D 1 0 D S 2 9 C 3 0- 1 4 3 7 2 6 7 - 8 54 A6 D 2 5 R A 2 9 F M 2 3 3 — 56 A7 D 1 0 R A 2 9 C M 2 3 2 — 51 A6 D 1 0 R A 2 9 A 0- 1 4 3 7 2 6 7 - 9 56 A6 D 2 5 W W 2 9 A 3 — 54 A7 D 1 0 R A 2 9 E — 52 A6 D 1 0 R A 2 9 A M 2 3 3 1- 1 4 3 7 2 6 7 - 0 56 A6 D 2 5 W W 2 9 B 3 — 54 A7 D 1 0 R A 2 9 E M 2 3 1 — 51 A6 D 1 0 R A 2 9 C 1- 1 4 3 7 2 6 7 - 1 56 A6 D 2 8 D S 2 9 A 2 3- 1 4 3 7 2 6 7 - 5 54 A7 D 1 0 R A 2 9 E M 2 3 2 — 51 A6 D 1 0 R A 2 9 C M 2 3 3 — 56 A6 D 2 8 D S 2 9 A 3 — 54 A7 D 1 0 R A 2 9 F — 52 A6 D 1 0 R A 2 9 E 1- 1 4 3 7 2 6 7 - 2 56 A6 D 2 8 D S 2 9 B 2 — 54 A7 D 1 0 R A 2 9 F M 2 3 1 — 51 A6 D 1 0 R A 2 9 E M 2 3 3 — 56 A6 D 2 8 D S 2 9 B 3 — 54 A7 D 1 0 R A 2 9 F M 2 3 2 — 51 A6 D 1 0 R A 2 9 F — 56 A6 D 2 8 D S 2 9 C 2 3- 1 4 3 7 2 6 7 - 6 54 A7 D 1 0 W W 2 9 A 3 0- 1 4 3 7 2 6 8 - 9 49 A6 D 1 0 R A 2 9 F M 2 3 3 — 56 A6 D 2 8 D S 2 9 C 3 — 54 A7 D 1 0 W W 2 9 B 3 — 49 A6 D 1 0 W W 2 9 A 3 1- 1 4 3 7 2 6 7 - 3 54 A6 D 2 8 R A 2 9 A 3- 1 4 3 7 2 6 7 - 7 56 A7 D 1 5 D S 2 9 A 2 1- 1 4 3 7 2 6 8 - 1 49 A6 D 1 0 W W 2 9 B 3 — 54 A6 D 2 8 R A 2 9 A M 2 3 3 — 56 A7 D 1 5 D S 2 9 B 2 — 49 A6 D 1 2 D S 2 9 A 2 — 54 A6 D 2 8 R A 2 9 C 3- 1 4 3 7 2 6 7 - 8 56 A7 D 1 5 D S 2 9 C 2 1- 1 4 3 7 2 6 8 - 2 49 A6 D 1 2 D S 2 9 A 3 — 54 A6 D 2 8 R A 2 9 C M 2 3 3 — 56 A7 D 1 5 D S 2 9 D 2 — 49 A6 D 1 2 D S 2 9 B 2 — 54 A6 D 2 8 R A 2 9 E 3- 1 4 3 7 2 6 7 - 9 56 A7 D 1 5 D S 2 9 E 2 — 49 A6 D 1 2 D S 2 9 B 3 — 54 A6 D 2 8 R A 2 9 E M 2 3 3 4- 1 4 3 7 2 6 7 - 0 56 A7 D 1 5 R A 2 9 A — 52 A6 D 1 2 D S 2 9 C 2 1- 1 4 3 7 2 6 7 - 4 54 A6 D 2 8 R A 2 9 F — 56 A7 D 1 5 R A 2 9 A M 2 3 1 — 51 A6 D 1 2 D S 2 9 C 3 — 54 A6 D 2 8 R A 2 9 F M 2 3 3 — 56 A7 D 1 5 R A 2 9 A M 2 3 2 — 51 A6 D 1 2 R A 2 9 A 1- 1 4 3 7 2 6 7 - 5 54 A6 D 2 8 W W 2 9 A 3 4- 1 4 3 7 2 6 7 - 1 54 A7 D 1 5 R A 2 9 C 1- 1 4 3 7 2 6 8 - 3 52 A6 D 1 2 R A 2 9 A M 2 3 3 — 56 A6 D 2 8 W W 2 9 B 3 — 54 A7 D 1 5 R A 2 9 C M 2 3 1 — 51 A6 D 1 2 R A 2 9 C — 56 A6 D 3 6 D S 2 9 A 2 4- 1 4 3 7 2 6 7 - 2 54 A7 D 1 5 R A 2 9 C M 2 3 2 — 51 A6 D 1 2 R A 2 9 C M 2 3 3 — 56 A6 D 3 6 D S 2 9 A 3 4- 1 4 3 7 2 6 7 - 3 54 A7 D 1 5 R A 2 9 E 1- 1 4 3 7 2 6 8 - 4 52 A6 D 1 2 R A 2 9 E — 56 A6 D 3 6 D S 2 9 B 2 — 54 A7 D 1 5 R A 2 9 E M 2 3 1 — 51 A6 D 1 2 R A 2 9 E M 2 3 3 — 56 A6 D 3 6 D S 2 9 B 3 — 54 A7 D 1 5 R A 2 9 E M 2 3 2 — 51 A6 D 1 2 R A 2 9 F — 56 A6 D 3 6 D S 2 9 C 2 4- 1 4 3 7 2 6 7 - 4 54 A7 D 1 5 R A 2 9 F — 52 A6 D 1 2 R A 2 9 F M 2 3 3 — 56 A6 D 3 6 D S 2 9 C 3 — 54 A7 D 1 5 R A 2 9 F M 2 3 1 — 51 A6 D 1 2 W W 2 9 A 3 1- 1 4 3 7 2 6 7 - 6 54 A6 D 3 6 R A 2 9 A — 56 A7 D 1 5 R A 2 9 F M 2 3 2 — 51 A6 D 1 2 W W 2 9 B 3 — 54 A6 D 3 6 R A 2 9 A M 2 3 3 — 56 A7 D 1 5 W W 2 9 A 3 1- 1 4 3 7 2 6 8 - 5 49 A6 D 1 5 D S 2 9 A 2 1- 1 4 3 7 2 6 7 - 7 54 A6 D 3 6 R A 2 9 C — 56 A7 D 1 5 W W 2 9 B 3 — 49 A6 D 1 5 D S 2 9 A 3 — 54 A6 D 3 6 R A 2 9 C M 2 3 3 — 56 A7 D 1 8 D S 2 9 A 2 1- 1 4 3 7 2 6 8 - 6 49 A6 D 1 5 D S 2 9 B 2 — 54 A6 D 3 6 R A 2 9 E 4- 1 4 3 7 2 6 7 - 5 56 A7 D 1 8 D S 2 9 B 2 1- 1 4 3 7 2 6 8 - 7 49 A6 D 1 5 D S 2 9 B 3 — 54 A6 D 3 6 R A 2 9 E M 2 3 3 — 56 A7 D 1 8 D S 2 9 C 2 — 49 A6 D 1 5 D S 2 9 C 2 1- 1 4 3 7 2 6 7 - 9 54 A6 D 3 6 R A 2 9 F — 56 A7 D 1 8 D S 2 9 D 2 — 49 A6 D 1 5 D S 2 9 C 3 — 54 A6 D 3 6 R A 2 9 F M 2 3 3 — 56 A7 D 1 8 D S 2 9 E 2 — 49 A6 D 1 5 R A 2 9 A — 56 A6 D 3 6 W W 2 9 A 3 4- 1 4 3 7 2 6 7 - 6 54 A7 D 1 8 R A 2 9 A — 52 A6 D 1 5 R A 2 9 A M 2 3 3 — 56 A6 D 3 6 W W 2 9 B 3 — 54 A7 D 1 8 R A 2 9 A M 2 3 1 — 51 A6 D 1 5 R A 2 9 C — 56 A6 D 4 0 R A 2 9 A — 56 A7 D 1 8 R A 2 9 A M 2 3 2 — 51 A6 D 1 5 R A 2 9 C M 2 3 3 — 56 A6 D 4 0 R A 2 9 A M 2 3 3 — 56 A7 D 1 8 R A 2 9 C — 52 A6 D 1 5 R A 2 9 E 2- 1 4 3 7 2 6 7 - 0 56 A6 D 4 0 R A 2 9 C — 56 A7 D 1 8 R A 2 9 C M 2 3 1 — 51 A6 D 1 5 R A 2 9 E M 2 3 3 — 56 A6 D 4 0 R A 2 9 C M 2 3 3 — 56 A7 D 1 8 R A 2 9 C M 2 3 2 — 51 A6 D 1 5 R A 2 9 F — 56 A6 D 4 0 R A 2 9 E — 56 A7 D 1 8 R A 2 9 E — 52 A6 D 1 5 R A 2 9 F M 2 3 3 — 56 A6 D 4 0 R A 2 9 E M 2 3 3 — 56 A7 D 1 8 R A 2 9 E M 2 3 1 — 51 A6 D 1 5 W W 2 9 A 3 2- 1 4 3 7 2 6 7 - 1 54 A6 D 4 0 R A 2 9 F — 56 A7 D 1 8 R A 2 9 E M 2 3 2 — 51 A6 D 1 5 W W 2 9 B 3 — 54 A6 D 4 0 R A 2 9 F M 2 3 3 — 56 A7 D 1 8 R A 2 9 F — 52 A6 D 1 8 D S 2 9 A 2 2- 1 4 3 7 2 6 7 - 2 54 A6 D 4 3 D S 2 9 A 2 4- 1 4 3 7 2 6 7 - 7 54 A7 D 1 8 R A 2 9 F M 2 3 1 — 51 A6 D 1 8 D S 2 9 A 3 — 54 A6 D 4 3 D S 2 9 A 3 4- 1 4 3 7 2 6 7 - 8 54 A7 D 1 8 R A 2 9 F M 2 3 2 — 51 A6 D 1 8 D S 2 9 B 2 — 54 A6 D 4 3 D S 2 9 B 2 — 54 A7 D 1 8 W W 2 9 A 3 1- 1 4 3 7 2 6 8 - 8 49 193 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r A7 D 1 8 W W 2 9 B 3 — 49 A7 D 3 5 W W 2 9 A 3 — 49 A8 D 1 0 R A 2 9 F — 46 A7 D 2 2 D S 2 9 A 2 — 49 A7 D 3 5 W W 2 9 B 3 — 49 A8 D 1 0 R A 2 9 F M 2 3 3 — 47 A7 D 2 2 D S 2 9 B 2 — 49 A7 D 3 6 D S 2 9 A 2 4- 1 4 3 7 2 6 8 - 1 49 A8 D 1 0 W W 2 9 A 3 2- 1 4 3 7 2 6 9 - 5 44 A7 D 2 2 D S 2 9 C 2 1- 1 4 3 7 2 6 8 - 9 49 A7 D 3 6 D S 2 9 B 2 — 49 A8 D 1 0 W W 2 9 B 3 — 44 A7 D 2 2 R A 2 9 A — 52 A7 D 3 6 D S 2 9 C 2 4- 1 4 3 7 2 6 8 - 2 49 A8 D 1 2 D S 2 9 A 2 2- 1 4 3 7 2 6 9 - 7 43 A7 D 2 2 R A 2 9 A M 2 3 1 — 51 A7 D 3 6 R A 2 9 A — 52 A8 D 1 2 D S 2 9 A 3 — 43 A7 D 2 2 R A 2 9 A M 2 3 2 — 51 A7 D 3 6 R A 2 9 A M 2 3 1 — 51 A8 D 1 2 D S 2 9 B 2 — 43 A7 D 2 2 R A 2 9 C — 52 A7 D 3 6 R A 2 9 A M 2 3 2 4- 1 4 3 7 2 6 8 - 3 51 A8 D 1 2 D S 2 9 B 3 — 43 A7 D 2 2 R A 2 9 C M 2 3 1 — 51 A7 D 3 6 R A 2 9 C — 52 A8 D 1 2 D S 2 9 C 2 2- 1 4 3 7 2 6 9 - 8 43 A7 D 2 2 R A 2 9 C M 2 3 2 — 51 A7 D 3 6 R A 2 9 C M 2 3 1 — 51 A8 D 1 2 D S 2 9 C 3 — 43 A7 D 2 2 R A 2 9 E — 52 A7 D 3 6 R A 2 9 C M 2 3 2 — 51 A8 D 1 2 R A 2 9 A — 46 A7 D 2 2 R A 2 9 E M 2 3 1 — 51 A7 D 3 6 R A 2 9 E — 52 A8 D 1 2 R A 2 9 A M 2 3 3 — 47 A7 D 2 2 R A 2 9 E M 2 3 2 — 51 A7 D 3 6 R A 2 9 E M 2 3 1 — 51 A8 D 1 2 R A 2 9 C 2- 1 4 3 7 2 6 9 - 9 46 A7 D 2 2 R A 2 9 F — 52 A7 D 3 6 R A 2 9 E M 2 3 2 — 51 A8 D 1 2 R A 2 9 C M 2 3 3 — 47 A7 D 2 2 R A 2 9 F M 2 3 1 — 51 A7 D 3 6 R A 2 9 F — 52 A8 D 1 2 R A 2 9 E 3- 1 4 3 7 2 6 9 - 0 46 A7 D 2 2 R A 2 9 F M 2 3 2 — 51 A7 D 3 6 R A 2 9 F M 2 3 1 — 51 A8 D 1 2 R A 2 9 E M 2 3 3 3- 1 4 3 7 2 6 9 - 1 47 A7 D 2 2 W W 2 9 A 3 — 49 A7 D 3 6 R A 2 9 F M 2 3 2 — 51 A8 D 1 2 W W 2 9 A 3 3- 1 4 3 7 2 6 9 - 2 44 A7 D 2 2 W W 2 9 B 3 — 49 A7 D 3 6 W W 2 9 A 3 4- 1 4 3 7 2 6 8 - 4 49 A8 D 1 2 W W 2 9 B 3 — 44 A7 D 2 5 D S 2 9 A 2 2- 1 4 3 7 2 6 8 - 1 49 A7 D 3 6 W W 2 9 B 3 — 49 A8 D 1 5 D S 2 9 A 2 3- 1 4 3 7 2 6 9 - 8 43 A7 D 2 5 D S 2 9 B 2 — 49 A7 D 4 0 D S 2 9 A 2 — 49 A8 D 1 5 D S 2 9 A 3 — 43 A7 D 2 5 D S 2 9 C 2 — 49 A7 D 4 0 D S 2 9 B 2 — 49 A8 D 1 5 D S 2 9 B 2 — 43 A7 D 2 5 D S 2 9 D 2 — 49 A7 D 4 0 D S 2 9 C 2 4- 1 4 3 7 2 6 8 - 6 49 A8 D 1 5 D S 2 9 B 3 — 43 A7 D 2 5 D S 2 9 E 2 — 49 A7 D 4 0 R A 2 9 A — 52 A8 D 1 5 D S 2 9 C 2 3- 1 4 3 7 2 6 9 - 9 43 A7 D 2 5 R A 2 9 A — 52 A7 D 4 0 R A 2 9 A M 2 3 1 — 51 A8 D 1 5 D S 2 9 C 3 — 43 A7 D 2 5 R A 2 9 A M 2 3 1 — 51 A7 D 4 0 R A 2 9 A M 2 3 2 — 51 A8 D 1 5 D S 2 9 D 2 4- 1 4 3 7 2 6 9 - 0 43 A7 D 2 5 R A 2 9 A M 2 3 2 — 51 A7 D 4 0 R A 2 9 C — 52 A8 D 1 5 D S 2 9 D 3 — 43 A7 D 2 5 R A 2 9 C — 52 A7 D 4 0 R A 2 9 C M 2 3 1 — 51 A8 D 1 5 D S 2 9 E 2 — 43 A7 D 2 5 R A 2 9 C M 2 3 1 — 51 A7 D 4 0 R A 2 9 C M 2 3 2 — 51 A8 D 1 5 D S 2 9 E 3 — 43 A7 D 2 5 R A 2 9 C M 2 3 2 — 51 A7 D 4 0 R A 2 9 E 4- 1 4 3 7 2 6 8 - 8 52 A8 D 1 5 R A 2 9 A — 46 A7 D 2 5 R A 2 9 E — 52 A7 D 4 0 R A 2 9 E M 2 3 1 — 51 A8 D 1 5 R A 2 9 A M 2 3 3 — 47 A7 D 2 5 R A 2 9 E M 2 3 1 — 51 A7 D 4 0 R A 2 9 E M 2 3 2 — 51 A8 D 1 5 R A 2 9 C 4- 1 4 3 7 2 6 9 - 1 46 A7 D 2 5 R A 2 9 E M 2 3 2 — 51 A7 D 4 0 R A 2 9 F — 52 A8 D 1 5 R A 2 9 C M 2 3 3 4- 1 4 3 7 2 6 9 - 2 47 A7 D 2 5 R A 2 9 F — 52 A7 D 4 0 R A 2 9 F M 2 3 1 — 51 A8 D 1 5 R A 2 9 E 4- 1 4 3 7 2 6 9 - 3 46 A7 D 2 5 R A 2 9 F M 2 3 1 — 51 A7 D 4 0 R A 2 9 F M 2 3 2 — 51 A8 D 1 5 R A 2 9 E M 2 3 3 4- 1 4 3 7 2 6 9 - 4 47 A7 D 2 5 R A 2 9 F M 2 3 2 2- 1 4 3 7 2 6 8 - 2 51 A7 D 4 0 W W 2 9 A 3 4- 1 4 3 7 2 6 8 - 9 49 A8 D 1 5 R A 2 9 F — 46 A7 D 2 5 W W 2 9 A 3 — 49 A7 D 4 0 W W 2 9 B 3 5- 1 4 3 7 2 6 8 - 0 49 A8 D 1 5 R A 2 9 F M 2 3 3 4- 1 4 3 7 2 6 9 - 5 47 A7 D 2 5 W W 2 9 B 3 — 49 A7 D 4 3 D S 2 9 A 2 5- 1 4 3 7 2 6 8 - 2 49 A8 D 1 5 W W 2 9 A 3 4- 1 4 3 7 2 6 9 - 6 44 A7 D 2 8 D S 2 9 A 2 2- 1 4 3 7 2 6 8 - 3 49 A7 D 4 3 D S 2 9 B 2 — 49 A8 D 1 5 W W 2 9 B 3 — 44 A7 D 2 8 D S 2 9 B 2 2- 1 4 3 7 2 6 8 - 4 49 A7 D 4 3 D S 2 9 C 2 5- 1 4 3 7 2 6 8 - 3 49 A8 D 1 8 D S 2 9 A 2 4- 1 4 3 7 2 6 9 - 8 43 A7 D 2 8 D S 2 9 C 2 2- 1 4 3 7 2 6 8 - 5 49 A7 D 4 3 R A 2 9 A — 52 A8 D 1 8 D S 2 9 A 3 — 43 A7 D 2 8 R A 2 9 A — 52 A7 D 4 3 R A 2 9 A M 2 3 1 — 51 A8 D 1 8 D S 2 9 B 2 — 43 A7 D 2 8 R A 2 9 A M 2 3 1 2- 1 4 3 7 2 6 8 - 8 51 A7 D 4 3 R A 2 9 A M 2 3 2 — 51 A8 D 1 8 D S 2 9 B 3 — 43 A7 D 2 8 R A 2 9 A M 2 3 2 — 51 A7 D 4 3 R A 2 9 C — 52 A8 D 1 8 D S 2 9 C 2 4- 1 4 3 7 2 6 9 - 9 43 A7 D 2 8 R A 2 9 C 2- 1 4 3 7 2 6 8 - 9 52 A7 D 4 3 R A 2 9 C M 2 3 1 — 51 A8 D 1 8 D S 2 9 C 3 5- 1 4 3 7 2 6 9 - 0 43 A7 D 2 8 R A 2 9 C M 2 3 1 — 51 A7 D 4 3 R A 2 9 C M 2 3 2 — 51 A8 D 1 8 D S 2 9 D 2 — 43 A7 D 2 8 R A 2 9 C M 2 3 2 3- 1 4 3 7 2 6 8 - 0 51 A7 D 4 3 R A 2 9 E — 52 A8 D 1 8 D S 2 9 D 3 — 43 A7 D 2 8 R A 2 9 E 3- 1 4 3 7 2 6 8 - 1 52 A7 D 4 3 R A 2 9 E M 2 3 1 — 51 A8 D 1 8 D S 2 9 E 2 — 43 A7 D 2 8 R A 2 9 E M 2 3 1 3- 1 4 3 7 2 6 8 - 2 51 A7 D 4 3 R A 2 9 E M 2 3 2 — 51 A8 D 1 8 D S 2 9 E 3 — 43 A7 D 2 8 R A 2 9 E M 2 3 2 — 51 A7 D 4 3 R A 2 9 F — 52 A8 D 1 8 R A 2 9 A — 46 A7 D 2 8 R A 2 9 F — 52 A7 D 4 3 R A 2 9 F M 2 3 1 — 51 A8 D 1 8 R A 2 9 A M 2 3 3 — 47 A7 D 2 8 R A 2 9 F M 2 3 1 — 51 A7 D 4 3 R A 2 9 F M 2 3 2 — 51 A8 D 1 8 R A 2 9 C 5- 1 4 3 7 2 6 9 - 1 46 A7 D 2 8 R A 2 9 F M 2 3 2 — 51 A7 D 4 3 W W 2 9 A 3 5- 1 4 3 7 2 6 8 - 4 49 A8 D 1 8 R A 2 9 C M 2 3 3 5- 1 4 3 7 2 6 9 - 2 47 A7 D 2 8 W W 2 9 A 3 3- 1 4 3 7 2 6 8 - 3 49 A7 D 4 3 W W 2 9 B 3 — 49 A8 D 1 8 R A 2 9 E — 46 A7 D 2 8 W W 2 9 B 3 — 49 A7 D 5 0 D S 2 9 A 2 5- 1 4 3 7 2 6 8 - 5 49 A8 D 1 8 R A 2 9 E M 2 3 3 — 47 A7 D 3 0 D S 2 9 A 2 3- 1 4 3 7 2 6 8 - 4 49 A7 D 5 0 D S 2 9 B 2 — 49 A8 D 1 8 R A 2 9 F — 46 A7 D 3 0 D S 2 9 B 2 — 49 A7 D 5 0 D S 2 9 C 2 5- 1 4 3 7 2 6 8 - 6 49 A8 D 1 8 R A 2 9 F M 2 3 3 5- 1 4 3 7 2 6 9 - 3 47 A7 D 3 0 D S 2 9 C 2 3- 1 4 3 7 2 6 8 - 5 49 A7 D 5 0 D S 2 9 D 2 5- 1 4 3 7 2 6 8 - 8 49 A8 D 1 8 W W 2 9 A 3 5- 1 4 3 7 2 6 9 - 4 44 A7 D 3 0 D S 2 9 D 2 — 49 A7 D 5 0 D S 2 9 E 2 — 49 A8 D 1 8 W W 2 9 B 3 — 44 A7 D 3 0 D S 2 9 E 2 — 49 A7 D 5 0 R A 2 9 A 6- 1 4 3 7 2 6 8 - 0 52 A8 D 2 0 D S 2 9 A 2 — 43 A7 D 3 0 R A 2 9 A — 52 A7 D 5 0 R A 2 9 A M 2 3 1 — 51 A8 D 2 0 D S 2 9 A 3 — 43 A7 D 3 0 R A 2 9 A M 2 3 1 3- 1 4 3 7 2 6 8 - 6 51 A7 D 5 0 R A 2 9 A M 2 3 2 — 51 A8 D 2 0 D S 2 9 B 2 5- 1 4 3 7 2 6 9 - 6 43 A7 D 3 0 R A 2 9 A M 2 3 2 — 51 A7 D 5 0 R A 2 9 C — 52 A8 D 2 0 D S 2 9 B 3 — 43 A7 D 3 0 R A 2 9 C — 52 A7 D 5 0 R A 2 9 C M 2 3 1 — 51 A8 D 2 0 D S 2 9 C 2 5- 1 4 3 7 2 6 9 - 7 43 A7 D 3 0 R A 2 9 C M 2 3 1 — 51 A7 D 5 0 R A 2 9 C M 2 3 2 — 51 A8 D 2 0 D S 2 9 C 3 — 43 A7 D 3 0 R A 2 9 C M 2 3 2 — 51 A7 D 5 0 R A 2 9 E — 52 A8 D 2 0 R A 2 9 A — 46 A7 D 3 0 R A 2 9 E — 52 A7 D 5 0 R A 2 9 E M 2 3 1 — 51 A8 D 2 0 R A 2 9 A M 2 3 3 — 47 A7 D 3 0 R A 2 9 E M 2 3 1 — 51 A7 D 5 0 R A 2 9 E M 2 3 2 — 51 A8 D 2 0 R A 2 9 C 5- 1 4 3 7 2 6 9 - 8 46 A7 D 3 0 R A 2 9 E M 2 3 2 — 51 A7 D 5 0 R A 2 9 F — 52 A8 D 2 0 R A 2 9 C M 2 3 3 — 47 A7 D 3 0 R A 2 9 F — 52 A7 D 5 0 R A 2 9 F M 2 3 1 — 51 A8 D 2 0 R A 2 9 E 5- 1 4 3 7 2 6 9 - 9 46 A7 D 3 0 R A 2 9 F M 2 3 1 — 51 A7 D 5 0 R A 2 9 F M 2 3 2 — 51 A8 D 2 0 R A 2 9 E M 2 3 3 — 47 A7 D 3 0 R A 2 9 F M 2 3 2 — 51 A7 D 5 0 W W 2 9 A 3 6- 1 4 3 7 2 6 8 - 1 49 A8 D 2 0 W W 2 9 A 3 6- 1 4 3 7 2 6 9 - 0 44 A7 D 3 0 W W 2 9 A 3 3- 1 4 3 7 2 6 8 - 7 49 A7 D 5 0 W W 2 9 B 3 6- 1 4 3 7 2 6 8 - 2 49 A8 D 2 0 W W 2 9 B 3 — 44 A7 D 3 0 W W 2 9 B 3 — 49 A8 D 1 0 D S 2 9 A 2 1- 1 4 3 7 2 6 9 - 9 43 A8 D 2 2 D S 2 9 A 2 6- 1 4 3 7 2 6 9 - 1 43 A7 D 3 5 D S 2 9 A 2 3- 1 4 3 7 2 6 8 - 8 49 A8 D 1 0 D S 2 9 A 3 — 43 A8 D 2 2 D S 2 9 A 3 — 43 A7 D 3 5 D S 2 9 B 2 — 49 A8 D 1 0 D S 2 9 B 2 — 43 A8 D 2 2 D S 2 9 B 2 — 43 A7 D 3 5 D S 2 9 C 2 3- 1 4 3 7 2 6 8 - 9 49 A8 D 1 0 D S 2 9 B 3 — 43 A8 D 2 2 D S 2 9 B 3 — 43 A7 D 3 5 R A 2 9 A 4- 1 4 3 7 2 6 8 - 0 52 A8 D 1 0 D S 2 9 C 2 2- 1 4 3 7 2 6 9 - 0 43 A8 D 2 2 D S 2 9 C 2 6- 1 4 3 7 2 6 9 - 2 43 A7 D 3 5 R A 2 9 A M 2 3 1 — 51 A8 D 1 0 D S 2 9 C 3 — 43 A8 D 2 2 D S 2 9 C 3 — 43 A7 D 3 5 R A 2 9 A M 2 3 2 — 51 A8 D 1 0 D S 2 9 D 2 — 43 A8 D 2 2 R A 2 9 A 6- 1 4 3 7 2 6 9 - 4 46 A7 D 3 5 R A 2 9 C — 52 A8 D 1 0 D S 2 9 D 3 — 43 A8 D 2 2 R A 2 9 A M 2 3 3 — 47 A7 D 3 5 R A 2 9 C M 2 3 1 — 51 A8 D 1 0 D S 2 9 E 2 — 43 A8 D 2 2 R A 2 9 C 6- 1 4 3 7 2 6 9 - 5 46 A7 D 3 5 R A 2 9 C M 2 3 2 — 51 A8 D 1 0 D S 2 9 E 3 — 43 A8 D 2 2 R A 2 9 C M 2 3 3 — 47 A7 D 3 5 R A 2 9 E — 52 A8 D 1 0 R A 2 9 A 2- 1 4 3 7 2 6 9 - 1 46 A8 D 2 2 R A 2 9 E 6- 1 4 3 7 2 6 9 - 6 46 A7 D 3 5 R A 2 9 E M 2 3 1 — 51 A8 D 1 0 R A 2 9 A M 2 3 3 — 47 A8 D 2 2 R A 2 9 E M 2 3 3 6- 1 4 3 7 2 6 9 - 7 47 A7 D 3 5 R A 2 9 E M 2 3 2 — 51 A8 D 1 0 R A 2 9 C 2- 1 4 3 7 2 6 9 - 2 46 A8 D 2 2 W W 2 9 A 3 6- 1 4 3 7 2 6 9 - 8 44 A7 D 3 5 R A 2 9 F — 52 A8 D 1 0 R A 2 9 C M 2 3 3 2- 1 4 3 7 2 6 9 - 3 47 A8 D 2 2 W W 2 9 B 3 — 44 A7 D 3 5 R A 2 9 F M 2 3 1 — 51 A8 D 1 0 R A 2 9 E 2- 1 4 3 7 2 6 9 - 4 46 A8 D 2 5 D S 2 9 A 2 6- 1 4 3 7 2 6 9 - 9 43 A7 D 3 5 R A 2 9 F M 2 3 2 — 51 A8 D 1 0 R A 2 9 E M 2 3 3 — 47 A8 D 2 5 D S 2 9 A 3 — 43 194 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r A8 D 2 5 D S 2 9 B 2 7- 1 4 3 7 2 6 9 - 0 43 A8 D 3 6 D S 2 9 A 3 — 43 A8 D 6 0 W W 2 9 B 3 — 44 A8 D 2 5 D S 2 9 B 3 — 43 A8 D 3 6 D S 2 9 B 2 — 43 A8 D 6 5 D S 2 9 A 2 — 43 A8 D 2 5 D S 2 9 C 2 7- 1 4 3 7 2 6 9 - 1 43 A8 D 3 6 D S 2 9 B 3 1- 1 4 3 7 2 7 0 - 7 43 A8 D 6 5 D S 2 9 A 3 — 44 A8 D 2 5 D S 2 9 C 3 7- 1 4 3 7 2 6 9 - 2 43 A8 D 3 6 D S 2 9 C 2 1- 1 4 3 7 2 7 0 - 8 43 A8 D 6 5 D S 2 9 B 2 — 43 A8 D 2 5 D S 2 9 D 2 — 43 A8 D 3 6 D S 2 9 C 3 1- 1 4 3 7 2 7 0 - 9 43 A8 D 6 5 D S 2 9 B 3 — 44 A8 D 2 5 D S 2 9 D 3 — 43 A8 D 3 6 R A 2 9 A 2- 1 4 3 7 2 7 0 - 0 46 A8 D 6 5 D S 2 9 C 2 5- 1 4 3 7 2 7 0 - 9 43 A8 D 2 5 D S 2 9 E 2 — 43 A8 D 3 6 R A 2 9 A M 2 3 3 — 47 A8 D 6 5 D S 2 9 C 3 — 44 A8 D 2 5 D S 2 9 E 3 — 43 A8 D 3 6 R A 2 9 C 2- 1 4 3 7 2 7 0 - 1 46 A8 D 6 5 D S 2 9 D 2 6- 1 4 3 7 2 7 0 - 0 43 A8 D 2 5 R A 2 9 A 7- 1 4 3 7 2 6 9 - 3 46 A8 D 3 6 R A 2 9 C M 2 3 3 — 47 A8 D 6 5 D S 2 9 D 3 — 44 A8 D 2 5 R A 2 9 A M 2 3 3 7- 1 4 3 7 2 6 9 - 4 47 A8 D 3 6 R A 2 9 E 2- 1 4 3 7 2 7 0 - 2 46 A8 D 6 5 D S 2 9 E 2 — 43 A8 D 2 5 R A 2 9 C 7- 1 4 3 7 2 6 9 - 5 46 A8 D 3 6 R A 2 9 E M 2 3 3 2- 1 4 3 7 2 7 0 - 3 47 A8 D 6 5 D S 2 9 E 3 — 44 A8 D 2 5 R A 2 9 C M 2 3 3 7- 1 4 3 7 2 6 9 - 6 47 A8 D 3 6 W W 2 9 A 3 2- 1 4 3 7 2 7 0 - 4 44 A8 D 6 5 R A 2 9 A — 46 A8 D 2 5 R A 2 9 E 7- 1 4 3 7 2 6 9 - 7 46 A8 D 3 6 W W 2 9 B 3 — 44 A8 D 6 5 R A 2 9 A M 2 3 3 — 47 A8 D 2 5 R A 2 9 E M 2 3 3 — 47 A8 D 4 0 D S 2 9 A 2 — 43 A8 D 6 5 R A 2 9 C — 46 A8 D 2 5 R A 2 9 F — 46 A8 D 4 0 D S 2 9 A 3 2- 1 4 3 7 2 7 0 - 6 43 A8 D 6 5 R A 2 9 C M 2 3 3 — 47 A8 D 2 5 R A 2 9 F M 2 3 3 7- 1 4 3 7 2 6 9 - 8 47 A8 D 4 0 D S 2 9 B 2 — 43 A8 D 6 5 R A 2 9 E — 46 A8 D 2 5 W W 2 9 A 3 7- 1 4 3 7 2 6 9 - 9 44 A8 D 4 0 D S 2 9 B 3 — 43 A8 D 6 5 R A 2 9 E M 2 3 3 — 47 A8 D 2 5 W W 2 9 B 3 — 44 A8 D 4 0 D S 2 9 C 2 2- 1 4 3 7 2 7 0 - 7 43 A8 D 6 5 R A 2 9 F — 46 A8 D 2 8 D S 2 9 A 2 8- 1 4 3 7 2 6 9 - 1 43 A8 D 4 0 D S 2 9 C 3 — 43 A8 D 6 5 R A 2 9 F M 2 3 3 — 47 A8 D 2 8 D S 2 9 A 3 — 43 A8 D 4 0 R A 2 9 A — 46 A8 D 6 5 W W 2 9 A 3 — 44 A8 D 2 8 D S 2 9 B 2 — 43 A8 D 4 0 R A 2 9 A M 2 3 3 — 47 A8 D 6 5 W W 2 9 B 3 — 44 A8 D 2 8 D S 2 9 B 3 — 43 A8 D 4 0 R A 2 9 C — 46 C1 D 1 8 P F 2 9 0 1 3 — 13 1 A8 D 2 8 D S 2 9 C 2 8- 1 4 3 7 2 6 9 - 2 43 A8 D 4 0 R A 2 9 C M 2 3 3 — 47 C1 D 1 8 P F 2 9 0 1 5 0- 1 4 3 7 2 6 4 - 3 13 1 A8 D 2 8 D S 2 9 C 3 — 43 A8 D 4 0 R A 2 9 E 2- 1 4 3 7 2 7 0 - 8 46 C1 D 1 8 P F 2 9 0 1 7 — 13 2 A8 D 2 8 R A 2 9 A — 46 A8 D 4 0 R A 2 9 E M 2 3 3 — 47 C1 D 1 8 P F 2 9 0 4 3 — 13 1 A8 D 2 8 R A 2 9 A M 2 3 3 — 47 A8 D 4 0 W W 2 9 A 3 2- 1 4 3 7 2 7 0 - 9 44 C1 D 1 8 P F 2 9 0 4 5 — 13 1 A8 D 2 8 R A 2 9 C 6- 1 4 3 7 2 7 0 - 6 46 A8 D 4 0 W W 2 9 B 3 — 44 C1 D 1 8 P F 2 9 0 4 7 — 13 2 A8 D 2 8 R A 2 9 C M 2 3 3 — 47 A8 D 4 3 D S 2 9 A 2 — 43 C1 D 1 8 P F 2 9 1 3 3 — 13 1 A8 D 2 8 R A 2 9 E 8- 1 4 3 7 2 6 9 - 3 46 A8 D 4 3 D S 2 9 A 3 — 43 C1 D 1 8 P F 2 9 1 3 5 — 13 1 A8 D 2 8 R A 2 9 E M 2 3 3 — 47 A8 D 4 3 D S 2 9 B 2 — 43 C1 D 1 8 P F 2 9 1 3 7 — 13 2 A8 D 2 8 W W 2 9 A 3 — 44 A8 D 4 3 D S 2 9 B 3 — 43 C1 D 2 0 P F 2 9 0 1 3 — 13 1 A8 D 2 8 W W 2 9 B 3 — 44 A8 D 4 3 D S 2 9 C 2 3- 1 4 3 7 2 7 0 - 0 43 C1 D 2 0 P F 2 9 0 1 5 0- 1 4 3 7 2 6 4 - 6 13 1 A8 D 3 0 D S 2 9 A 2 8- 1 4 3 7 2 6 9 - 5 43 A8 D 4 3 D S 2 9 C 3 — 43 C1 D 2 0 P F 2 9 0 1 7 — 13 2 A8 D 3 0 D S 2 9 A 3 — 43 A8 D 4 3 R A 2 9 A 3- 1 4 3 7 2 7 0 - 1 46 C1 D 2 0 P F 2 9 0 4 3 0- 1 4 3 7 2 6 4 - 7 13 1 A8 D 3 0 D S 2 9 B 2 8- 1 4 3 7 2 6 9 - 6 43 A8 D 4 3 R A 2 9 A M 2 3 3 — 47 C1 D 2 0 P F 2 9 0 4 5 — 13 1 A8 D 3 0 D S 2 9 B 3 — 43 A8 D 4 3 R A 2 9 C 3- 1 4 3 7 2 7 0 - 2 46 C1 D 2 0 P F 2 9 0 4 7 — 13 2 A8 D 3 0 D S 2 9 C 2 8- 1 4 3 7 2 6 9 - 7 43 A8 D 4 3 R A 2 9 C M 2 3 3 — 47 C1 D 2 0 P F 2 9 1 3 3 — 13 1 A8 D 3 0 D S 2 9 C 3 8- 1 4 3 7 2 6 9 - 9 43 A8 D 4 3 R A 2 9 E 3- 1 4 3 7 2 7 0 - 3 46 C1 D 2 0 P F 2 9 1 3 5 — 13 1 A8 D 3 0 D S 2 9 D 2 9- 1 4 3 7 2 6 9 - 0 43 A8 D 4 3 R A 2 9 E M 2 3 3 — 47 C1 D 2 0 P F 2 9 1 3 7 — 13 2 A8 D 3 0 D S 2 9 D 2 9- 1 4 3 7 2 6 9 - 1 43 A8 D 4 3 W W 2 9 A 3 3- 1 4 3 7 2 7 0 - 4 44 C1 D 2 2 P F 2 9 0 1 3 — 13 1 A8 D 3 0 D S 2 9 D 3 — 43 A8 D 4 3 W W 2 9 B 3 — 44 C1 D 2 2 P F 2 9 0 1 5 — 13 1 A8 D 3 0 D S 2 9 E 2 — 43 A8 D 4 4 D S 2 9 A 2 3- 1 4 3 7 2 7 0 - 5 43 C1 D 2 2 P F 2 9 0 1 7 — 13 2 A8 D 3 0 D S 2 9 E 3 — 43 A8 D 4 4 D S 2 9 A 3 — 44 C1 D 2 2 P F 2 9 0 4 3 — 13 1 A8 D 3 0 R A 2 9 A — 46 A8 D 4 4 D S 2 9 B 2 — 43 C1 D 2 2 P F 2 9 0 4 5 — 13 1 A8 D 3 0 R A 2 9 A M 2 3 3 — 47 A8 D 4 4 D S 2 9 B 3 — 44 C1 D 2 2 P F 2 9 0 4 7 — 13 2 A8 D 3 0 R A 2 9 C 9- 1 4 3 7 2 6 9 - 2 46 A8 D 4 4 D S 2 9 C 2 3- 1 4 3 7 2 7 0 - 6 43 C1 D 2 2 P F 2 9 1 3 3 — 13 1 A8 D 3 0 R A 2 9 C M 2 3 3 — 47 A8 D 4 4 D S 2 9 C 3 3- 1 4 3 7 2 7 0 - 7 44 C1 D 2 2 P F 2 9 1 3 5 — 13 1 A8 D 3 0 R A 2 9 E 9- 1 4 3 7 2 6 9 - 3 46 A8 D 4 4 R A 2 9 A — 46 C1 D 2 2 P F 2 9 1 3 7 — 13 2 A8 D 3 0 R A 2 9 E M 2 3 3 — 47 A8 D 4 4 R A 2 9 A M 2 3 3 — 47 C1 D 2 5 P F 2 9 0 1 3 0- 1 4 3 7 2 6 4 - 9 13 1 A8 D 3 0 R A 2 9 F — 46 A8 D 4 4 R A 2 9 C — 46 C1 D 2 5 P F 2 9 0 1 5 1- 1 4 3 7 2 6 4 - 0 13 1 A8 D 3 0 R A 2 9 F M 2 3 3 — 47 A8 D 4 4 R A 2 9 C M 2 3 3 3- 1 4 3 7 2 7 0 - 8 47 C1 D 2 5 P F 2 9 0 1 7 — 13 2 A8 D 3 0 W W 2 9 A 3 9- 1 4 3 7 2 6 9 - 4 44 A8 D 4 4 R A 2 9 E — 46 C1 D 2 5 P F 2 9 0 4 3 — 13 1 A8 D 3 0 W W 2 9 B 3 9- 1 4 3 7 2 6 9 - 5 44 A8 D 4 4 R A 2 9 E M 2 3 3 — 47 C1 D 2 5 P F 2 9 0 4 5 — 13 1 A8 D 3 1 D S 2 9 A 2 9- 1 4 3 7 2 6 9 - 8 43 A8 D 4 4 W W 2 9 A 3 — 44 C1 D 2 5 P F 2 9 0 4 7 — 13 2 A8 D 3 1 D S 2 9 A 3 9- 1 4 3 7 2 6 9 - 9 43 A8 D 4 4 W W 2 9 B 3 — 44 C1 D 2 5 P F 2 9 1 3 3 — 13 1 A8 D 3 1 D S 2 9 B 2 — 43 A8 D 5 0 D S 2 9 A 2 3- 1 4 3 7 2 7 0 - 9 43 C1 D 2 5 P F 2 9 1 3 5 — 13 1 A8 D 3 1 D S 2 9 B 3 0- 1 4 3 7 2 7 0 - 1 43 A8 D 5 0 D S 2 9 A 3 — 44 C1 D 2 5 P F 2 9 1 3 7 — 13 2 A8 D 3 1 D S 2 9 C 2 0- 1 4 3 7 2 7 0 - 2 43 A8 D 5 0 D S 2 9 B 2 — 43 C1 D 2 8 P F 2 9 0 1 3 — 13 1 A8 D 3 1 D S 2 9 C 3 — 43 A8 D 5 0 D S 2 9 B 3 — 44 C1 D 2 8 P F 2 9 0 1 5 — 13 1 A8 D 3 1 D S 2 9 D 2 0- 1 4 3 7 2 7 0 - 3 43 A8 D 5 0 D S 2 9 C 2 4- 1 4 3 7 2 7 0 - 0 43 C1 D 2 8 P F 2 9 0 1 7 — 13 2 A8 D 3 1 D S 2 9 D 3 — 43 A8 D 5 0 D S 2 9 C 3 4- 1 4 3 7 2 7 0 - 1 44 C1 D 2 8 P F 2 9 0 4 3 — 13 1 A8 D 3 1 D S 2 9 E 2 — 43 A8 D 5 0 D S 2 9 D 2 4- 1 4 3 7 2 7 0 - 2 43 C1 D 2 8 P F 2 9 0 4 5 — 13 1 A8 D 3 1 D S 2 9 E 3 — 43 A8 D 5 0 D S 2 9 D 3 — 44 C1 D 2 8 P F 2 9 0 4 7 — 13 2 A8 D 3 1 R A 2 9 A 0- 1 4 3 7 2 7 0 - 4 46 A8 D 5 0 D S 2 9 E 2 — 43 C1 D 2 8 P F 2 9 1 3 3 — 13 1 A8 D 3 1 R A 2 9 A M 2 3 3 — 47 A8 D 5 0 D S 2 9 E 3 — 44 C1 D 2 8 P F 2 9 1 3 5 — 13 1 A8 D 3 1 R A 2 9 C 0- 1 4 3 7 2 7 0 - 6 46 A8 D 5 0 R A 2 9 A — 46 C1 D 2 8 P F 2 9 1 3 7 — 13 2 A8 D 3 1 R A 2 9 C M 2 3 3 0- 1 4 3 7 2 7 0 - 7 47 A8 D 5 0 R A 2 9 A M 2 3 3 — 47 C1 D 3 0 P F 2 9 0 1 3 — 13 1 A8 D 3 1 R A 2 9 E 0- 1 4 3 7 2 7 0 - 8 46 A8 D 5 0 R A 2 9 C 4- 1 4 3 7 2 7 0 - 4 46 C1 D 3 0 P F 2 9 0 1 5 — 13 1 A8 D 3 1 R A 2 9 E M 2 3 3 — 47 A8 D 5 0 R A 2 9 C M 2 3 3 — 47 C1 D 3 0 P F 2 9 0 1 7 — 13 2 A8 D 3 1 R A 2 9 F 0- 1 4 3 7 2 7 0 - 9 46 A8 D 5 0 R A 2 9 E 4- 1 4 3 7 2 7 0 - 5 46 C1 D 3 0 P F 2 9 0 4 3 — 13 1 A8 D 3 1 R A 2 9 F M 2 3 3 — 47 A8 D 5 0 R A 2 9 E M 2 3 3 — 47 C1 D 3 0 P F 2 9 0 4 5 — 13 1 A8 D 3 1 W W 2 9 A 3 1- 1 4 3 7 2 7 0 - 0 44 A8 D 5 0 R A 2 9 F 4- 1 4 3 7 2 7 0 - 6 46 C1 D 3 0 P F 2 9 0 4 7 — 13 2 A8 D 3 1 W W 2 9 B 3 — 44 A8 D 5 0 R A 2 9 F M 2 3 3 — 47 C1 D 3 0 P F 2 9 1 3 3 — 13 1 A8 D 3 5 D S 2 9 A 2 1- 1 4 3 7 2 7 0 - 2 43 A8 D 5 0 W W 2 9 A 3 4- 1 4 3 7 2 7 0 - 7 44 C1 D 3 0 P F 2 9 1 3 5 — 13 1 A8 D 3 5 D S 2 9 A 3 — 43 A8 D 5 0 W W 2 9 B 3 — 44 C1 D 3 0 P F 2 9 1 3 7 — 13 2 A8 D 3 5 D S 2 9 B 2 — 43 A8 D 6 0 D S 2 9 A 2 5- 1 4 3 7 2 7 0 - 1 43 C1 D 3 5 P F 2 9 0 1 3 1- 1 4 3 7 2 6 4 - 5 13 1 A8 D 3 5 D S 2 9 B 3 — 43 A8 D 6 0 D S 2 9 A 3 — 44 C1 D 3 5 P F 2 9 0 1 5 1- 1 4 3 7 2 6 4 - 6 13 1 A8 D 3 5 D S 2 9 C 2 1- 1 4 3 7 2 7 0 - 3 43 A8 D 6 0 D S 2 9 B 2 — 43 C1 D 3 5 P F 2 9 0 1 7 — 13 2 A8 D 3 5 D S 2 9 C 3 — 43 A8 D 6 0 D S 2 9 B 3 — 44 C1 D 3 5 P F 2 9 0 4 3 — 13 1 A8 D 3 5 R A 2 9 A — 46 A8 D 6 0 D S 2 9 C 2 5- 1 4 3 7 2 7 0 - 2 43 C1 D 3 5 P F 2 9 0 4 5 — 13 1 A8 D 3 5 R A 2 9 A M 2 3 3 — 47 A8 D 6 0 D S 2 9 C 3 5- 1 4 3 7 2 7 0 - 3 44 C1 D 3 5 P F 2 9 0 4 7 — 13 2 A8 D 3 5 R A 2 9 C 1- 1 4 3 7 2 7 0 - 4 46 A8 D 6 0 R A 2 9 A 5- 1 4 3 7 2 7 0 - 5 46 C1 D 3 5 P F 2 9 1 3 3 — 13 1 A8 D 3 5 R A 2 9 C M 2 3 3 — 47 A8 D 6 0 R A 2 9 A M 2 3 3 — 47 C1 D 3 5 P F 2 9 1 3 5 — 13 1 A8 D 3 5 R A 2 9 E — 46 A8 D 6 0 R A 2 9 C — 46 C1 D 3 5 P F 2 9 1 3 7 — 13 2 A8 D 3 5 R A 2 9 E M 2 3 3 — 47 A8 D 6 0 R A 2 9 C M 2 3 3 — 47 C1 D 3 6 P F 2 9 0 1 3 — 13 1 A8 D 3 5 W W 2 9 A 3 1- 1 4 3 7 2 7 0 - 5 44 A8 D 6 0 R A 2 9 E — 46 C1 D 3 6 P F 2 9 0 1 5 — 13 1 A8 D 3 5 W W 2 9 B 3 — 44 A8 D 6 0 R A 2 9 E M 2 3 3 — 47 C1 D 3 6 P F 2 9 0 1 7 — 13 2 A8 D 3 6 D S 2 9 A 2 1- 1 4 3 7 2 7 0 - 6 43 A8 D 6 0 W W 2 9 A 3 5- 1 4 3 7 2 7 0 - 6 44 C1 D 3 6 P F 2 9 0 4 3 — 13 1 195 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r C1 D 3 6 P F 2 9 0 4 5 — 13 1 C6 D 1 0 D S 2 9 D 4 — 40 C6 D 1 8 P F 2 9 0 2 3 1- 1 4 3 7 2 6 2 - 4 14 6 C1 D 3 6 P F 2 9 0 4 7 — 13 2 C6 D 1 0 D S 2 9 E 1 — 39 C6 D 1 8 P F 2 9 0 3 2 — 14 6 C1 D 3 6 P F 2 9 1 3 3 — 13 1 C6 D 1 0 D S 2 9 E 3 — 39 C6 D 1 8 P F 2 9 0 3 3 — 14 6 C1 D 3 6 P F 2 9 1 3 5 — 13 1 C6 D 1 0 D S 2 9 E 4 — 40 C6 D 1 8 P F 2 9 0 4 2 — 14 8 C1 D 3 6 P F 2 9 1 3 7 — 13 2 C6 D 1 0 P F 2 9 0 1 2 — 14 8 C6 D 1 8 P F 2 9 0 4 3 — 14 8 C1 D 4 0 P F 2 9 0 1 3 — 13 1 C6 D 1 0 P F 2 9 0 1 3 — 14 8 C6 D 1 8 P F 2 9 1 3 2 — 14 8 C1 D 4 0 P F 2 9 0 1 5 — 13 1 C6 D 1 0 P F 2 9 0 2 2 0- 1 4 3 7 2 6 2 - 6 14 6 C6 D 1 8 P F 2 9 1 3 3 — 14 8 C1 D 4 0 P F 2 9 0 1 7 — 13 2 C6 D 1 0 P F 2 9 0 2 3 — 14 6 C6 D 1 8 P F 2 9 1 4 2 — 14 6 C1 D 4 0 P F 2 9 0 4 3 — 13 1 C6 D 1 0 P F 2 9 0 3 2 — 14 6 C6 D 1 8 P F 2 9 1 4 3 — 14 6 C1 D 4 0 P F 2 9 0 4 5 — 13 1 C6 D 1 0 P F 2 9 0 3 3 — 14 6 C6 D 2 0 D S 2 9 A 1 — 39 C1 D 4 0 P F 2 9 0 4 7 — 13 2 C6 D 1 0 P F 2 9 0 4 2 — 14 8 C6 D 2 0 D S 2 9 A 3 — 39 C1 D 4 0 P F 2 9 1 3 3 — 13 1 C6 D 1 0 P F 2 9 0 4 3 0- 1 4 3 7 2 6 2 - 7 14 8 C6 D 2 0 D S 2 9 A 4 — 40 C1 D 4 0 P F 2 9 1 3 5 — 13 1 C6 D 1 0 P F 2 9 1 3 2 — 14 8 C6 D 2 0 D S 2 9 B 1 — 39 C1 D 4 0 P F 2 9 1 3 7 — 13 2 C6 D 1 0 P F 2 9 1 3 3 — 14 8 C6 D 2 0 D S 2 9 B 3 — 39 C1 D 4 3 P F 2 9 0 1 3 — 13 1 C6 D 1 0 P F 2 9 1 4 2 — 14 6 C6 D 2 0 D S 2 9 B 4 — 40 C1 D 4 3 P F 2 9 0 1 5 — 13 1 C6 D 1 0 P F 2 9 1 4 3 — 14 6 C6 D 2 0 D S 2 9 C 1 — 39 C1 D 4 3 P F 2 9 0 1 7 — 13 2 C6 D 1 2 D S 2 9 A 1 — 39 C6 D 2 0 D S 2 9 C 3 — 39 C1 D 4 3 P F 2 9 0 4 3 — 13 1 C6 D 1 2 D S 2 9 A 3 — 39 C6 D 2 0 D S 2 9 C 4 — 40 C1 D 4 3 P F 2 9 0 4 5 — 13 1 C6 D 1 2 D S 2 9 A 4 2- 1 4 3 7 2 7 3 - 3 40 C6 D 2 0 D S 2 9 D 1 — 39 C1 D 4 3 P F 2 9 0 4 7 — 13 2 C6 D 1 2 D S 2 9 B 1 — 39 C6 D 2 0 D S 2 9 D 3 — 39 C1 D 4 3 P F 2 9 1 3 3 — 13 1 C6 D 1 2 D S 2 9 B 3 — 39 C6 D 2 0 D S 2 9 D 4 — 40 C1 D 4 3 P F 2 9 1 3 5 — 13 1 C6 D 1 2 D S 2 9 B 4 — 40 C6 D 2 0 D S 2 9 E 1 — 39 C1 D 4 3 P F 2 9 1 3 7 — 13 2 C6 D 1 2 D S 2 9 C 1 2- 1 4 3 7 2 7 3 - 4 39 C6 D 2 0 D S 2 9 E 3 — 39 C1 D 4 5 P F 2 9 0 1 3 — 13 1 C6 D 1 2 D S 2 9 C 3 2- 1 4 3 7 2 7 3 - 5 39 C6 D 2 0 D S 2 9 E 4 — 40 C1 D 4 5 P F 2 9 0 1 5 — 13 1 C6 D 1 2 D S 2 9 C 4 — 40 C6 D 2 0 P F 2 9 0 1 2 — 14 8 C1 D 4 5 P F 2 9 0 1 7 — 13 2 C6 D 1 2 D S 2 9 D 1 — 39 C6 D 2 0 P F 2 9 0 1 3 — 14 8 C1 D 4 5 P F 2 9 0 4 3 — 13 1 C6 D 1 2 D S 2 9 D 3 — 39 C6 D 2 0 P F 2 9 0 2 2 — 14 6 C1 D 4 5 P F 2 9 0 4 5 — 13 1 C6 D 1 2 D S 2 9 D 4 — 40 C6 D 2 0 P F 2 9 0 2 3 — 14 6 C1 D 4 5 P F 2 9 0 4 7 — 13 2 C6 D 1 2 D S 2 9 E 1 — 39 C6 D 2 0 P F 2 9 0 3 2 — 14 6 C1 D 4 5 P F 2 9 1 3 3 — 13 1 C6 D 1 2 D S 2 9 E 3 — 39 C6 D 2 0 P F 2 9 0 3 3 — 14 6 C1 D 4 5 P F 2 9 1 3 5 — 13 1 C6 D 1 2 D S 2 9 E 4 — 40 C6 D 2 0 P F 2 9 0 4 2 — 14 8 C1 D 4 5 P F 2 9 1 3 7 — 13 2 C6 D 1 2 P F 2 9 0 1 2 — 14 8 C6 D 2 0 P F 2 9 0 4 3 — 14 8 C1 D 5 0 P F 2 9 0 1 3 2- 1 4 3 7 2 6 4 - 2 13 1 C6 D 1 2 P F 2 9 0 1 3 — 14 8 C6 D 2 0 P F 2 9 1 3 2 — 14 8 C1 D 5 0 P F 2 9 0 1 5 2- 1 4 3 7 2 6 4 - 3 13 1 C6 D 1 2 P F 2 9 0 2 2 — 14 6 C6 D 2 0 P F 2 9 1 3 3 — 14 8 C1 D 5 0 P F 2 9 0 1 7 2- 1 4 3 7 2 6 4 - 4 13 2 C6 D 1 2 P F 2 9 0 2 3 — 14 6 C6 D 2 0 P F 2 9 1 4 2 — 14 6 C1 D 5 0 P F 2 9 0 4 3 — 13 1 C6 D 1 2 P F 2 9 0 3 2 — 14 6 C6 D 2 0 P F 2 9 1 4 3 — 14 6 C1 D 5 0 P F 2 9 0 4 5 — 13 1 C6 D 1 2 P F 2 9 0 3 3 — 14 6 C6 D 2 2 D S 2 9 A 1 3- 1 4 3 7 2 7 3 - 5 39 C1 D 5 0 P F 2 9 0 4 7 — 13 2 C6 D 1 2 P F 2 9 0 4 2 — 14 8 C6 D 2 2 D S 2 9 A 3 3- 1 4 3 7 2 7 3 - 6 39 C1 D 5 0 P F 2 9 1 3 3 — 13 1 C6 D 1 2 P F 2 9 0 4 3 — 14 8 C6 D 2 2 D S 2 9 A 4 — 40 C1 D 5 0 P F 2 9 1 3 5 — 13 1 C6 D 1 2 P F 2 9 1 3 2 — 14 8 C6 D 2 2 D S 2 9 B 1 — 39 C1 D 5 0 P F 2 9 1 3 7 — 13 2 C6 D 1 2 P F 2 9 1 3 3 — 14 8 C6 D 2 2 D S 2 9 B 3 — 39 C1 D 6 0 P F 2 9 0 1 3 — 13 1 C6 D 1 2 P F 2 9 1 4 2 — 14 6 C6 D 2 2 D S 2 9 B 4 3- 1 4 3 7 2 7 3 - 7 40 C1 D 6 0 P F 2 9 0 1 5 — 13 1 C6 D 1 2 P F 2 9 1 4 3 — 14 6 C6 D 2 2 D S 2 9 C 1 3- 1 4 3 7 2 7 3 - 8 39 C1 D 6 0 P F 2 9 0 1 7 — 13 2 C6 D 1 5 D S 2 9 A 1 2- 1 4 3 7 2 7 3 - 6 39 C6 D 2 2 D S 2 9 C 3 — 39 C1 D 6 0 P F 2 9 0 4 3 — 13 1 C6 D 1 5 D S 2 9 A 3 — 39 C6 D 2 2 D S 2 9 C 4 — 40 C1 D 6 0 P F 2 9 0 4 5 — 13 1 C6 D 1 5 D S 2 9 A 4 — 40 C6 D 2 2 D S 2 9 D 1 3- 1 4 3 7 2 7 3 - 9 39 C1 D 6 0 P F 2 9 0 4 7 — 13 2 C6 D 1 5 D S 2 9 B 1 — 39 C6 D 2 2 D S 2 9 D 3 4- 1 4 3 7 2 7 3 - 0 39 C1 D 6 0 P F 2 9 1 3 3 — 13 1 C6 D 1 5 D S 2 9 B 3 2- 1 4 3 7 2 7 3 - 7 39 C6 D 2 2 D S 2 9 D 4 — 40 C1 D 6 0 P F 2 9 1 3 5 — 13 1 C6 D 1 5 D S 2 9 B 4 — 40 C6 D 2 2 D S 2 9 E 1 — 39 C1 D 6 0 P F 2 9 1 3 7 — 13 2 C6 D 1 5 D S 2 9 C 1 2- 1 4 3 7 2 7 3 - 8 39 C6 D 2 2 D S 2 9 E 3 — 39 C6 D 0 6 D S 2 9 A 1 1- 1 4 3 7 2 7 3 - 3 39 C6 D 1 5 D S 2 9 C 3 2- 1 4 3 7 2 7 3 - 9 39 C6 D 2 2 D S 2 9 E 4 — 40 C6 D 0 6 D S 2 9 A 3 — 39 C6 D 1 5 D S 2 9 C 4 — 40 C6 D 2 2 P F 2 9 0 1 2 — 14 8 C6 D 0 6 D S 2 9 A 4 — 40 C6 D 1 5 D S 2 9 D 1 3- 1 4 3 7 2 7 3 - 0 39 C6 D 2 2 P F 2 9 0 1 3 1- 1 4 3 7 2 6 2 - 8 14 8 C6 D 0 6 D S 2 9 B 1 — 39 C6 D 1 5 D S 2 9 D 3 3- 1 4 3 7 2 7 3 - 1 39 C6 D 2 2 P F 2 9 0 2 2 — 14 6 C6 D 0 6 D S 2 9 B 3 — 39 C6 D 1 5 D S 2 9 D 4 — 40 C6 D 2 2 P F 2 9 0 2 3 1- 1 4 3 7 2 6 2 - 9 14 6 C6 D 0 6 D S 2 9 B 4 — 40 C6 D 1 5 D S 2 9 E 1 — 39 C6 D 2 2 P F 2 9 0 3 2 — 14 6 C6 D 0 6 D S 2 9 C 1 1- 1 4 3 7 2 7 3 - 4 39 C6 D 1 5 D S 2 9 E 3 — 39 C6 D 2 2 P F 2 9 0 3 3 — 14 6 C6 D 0 6 D S 2 9 C 3 1- 1 4 3 7 2 7 3 - 5 39 C6 D 1 5 D S 2 9 E 4 — 40 C6 D 2 2 P F 2 9 0 4 2 — 14 8 C6 D 0 6 D S 2 9 C 4 — 40 C6 D 1 5 P F 2 9 0 1 2 — 14 8 C6 D 2 2 P F 2 9 0 4 3 2- 1 4 3 7 2 6 2 - 0 14 8 C6 D 0 6 D S 2 9 D 1 1- 1 4 3 7 2 7 3 - 6 39 C6 D 1 5 P F 2 9 0 1 3 — 14 8 C6 D 2 2 P F 2 9 1 3 2 — 14 8 C6 D 0 6 D S 2 9 D 3 1- 1 4 3 7 2 7 3 - 7 39 C6 D 1 5 P F 2 9 0 2 2 0- 1 4 3 7 2 6 2 - 9 14 6 C6 D 2 2 P F 2 9 1 3 3 — 14 8 C6 D 0 6 D S 2 9 D 4 1- 1 4 3 7 2 7 3 - 8 40 C6 D 1 5 P F 2 9 0 2 3 1- 1 4 3 7 2 6 2 - 0 14 6 C6 D 2 2 P F 2 9 1 4 2 — 14 6 C6 D 0 6 D S 2 9 E 1 — 39 C6 D 1 5 P F 2 9 0 3 2 — 14 6 C6 D 2 2 P F 2 9 1 4 3 — 14 6 C6 D 0 6 D S 2 9 E 3 — 39 C6 D 1 5 P F 2 9 0 3 3 — 14 6 C6 D 2 5 D S 2 9 A 1 — 39 C6 D 0 6 D S 2 9 E 4 — 40 C6 D 1 5 P F 2 9 0 4 2 — 14 8 C6 D 2 5 D S 2 9 A 3 4- 1 4 3 7 2 7 3 - 1 39 C6 D 0 6 P F 2 9 0 1 2 — 14 8 C6 D 1 5 P F 2 9 0 4 3 — 14 8 C6 D 2 5 D S 2 9 A 4 — 40 C6 D 0 6 P F 2 9 0 1 3 0- 1 4 3 7 2 6 2 - 4 14 8 C6 D 1 5 P F 2 9 1 3 2 — 14 8 C6 D 2 5 D S 2 9 B 1 — 39 C6 D 0 6 P F 2 9 0 2 2 — 14 6 C6 D 1 5 P F 2 9 1 3 3 — 14 8 C6 D 2 5 D S 2 9 B 3 — 39 C6 D 0 6 P F 2 9 0 2 3 — 14 6 C6 D 1 5 P F 2 9 1 4 2 — 14 6 C6 D 2 5 D S 2 9 B 4 — 40 C6 D 0 6 P F 2 9 0 3 2 — 14 6 C6 D 1 5 P F 2 9 1 4 3 — 14 6 C6 D 2 5 D S 2 9 C 1 — 39 C6 D 0 6 P F 2 9 0 3 3 — 14 6 C6 D 1 8 D S 2 9 A 1 3- 1 4 3 7 2 7 3 - 2 39 C6 D 2 5 D S 2 9 C 3 4- 1 4 3 7 2 7 3 - 2 39 C6 D 0 6 P F 2 9 0 4 2 — 14 8 C6 D 1 8 D S 2 9 A 3 3- 1 4 3 7 2 7 3 - 3 39 C6 D 2 5 D S 2 9 C 4 — 40 C6 D 0 6 P F 2 9 0 4 3 0- 1 4 3 7 2 6 2 - 5 14 8 C6 D 1 8 D S 2 9 A 4 — 40 C6 D 2 5 D S 2 9 D 1 4- 1 4 3 7 2 7 3 - 3 39 C6 D 0 6 P F 2 9 1 3 2 — 14 8 C6 D 1 8 D S 2 9 B 1 — 39 C6 D 2 5 D S 2 9 D 3 — 39 C6 D 0 6 P F 2 9 1 3 3 — 14 8 C6 D 1 8 D S 2 9 B 3 — 39 C6 D 2 5 D S 2 9 D 4 — 40 C6 D 0 6 P F 2 9 1 4 2 — 14 6 C6 D 1 8 D S 2 9 B 4 — 40 C6 D 2 5 D S 2 9 E 1 — 39 C6 D 0 6 P F 2 9 1 4 3 — 14 6 C6 D 1 8 D S 2 9 C 1 3- 1 4 3 7 2 7 3 - 4 39 C6 D 2 5 D S 2 9 E 3 — 39 C6 D 1 0 D S 2 9 A 1 1- 1 4 3 7 2 7 3 - 9 39 C6 D 1 8 D S 2 9 C 3 — 39 C6 D 2 5 D S 2 9 E 4 — 40 C6 D 1 0 D S 2 9 A 3 — 39 C6 D 1 8 D S 2 9 C 4 — 40 C6 D 2 5 P F 2 9 0 1 2 — 14 8 C6 D 1 0 D S 2 9 A 4 — 40 C6 D 1 8 D S 2 9 D 1 — 39 C6 D 2 5 P F 2 9 0 1 3 — 14 8 C6 D 1 0 D S 2 9 B 1 — 39 C6 D 1 8 D S 2 9 D 3 — 39 C6 D 2 5 P F 2 9 0 2 2 — 14 6 C6 D 1 0 D S 2 9 B 3 2- 1 4 3 7 2 7 3 - 0 39 C6 D 1 8 D S 2 9 D 4 — 40 C6 D 2 5 P F 2 9 0 2 3 — 14 6 C6 D 1 0 D S 2 9 B 4 — 40 C6 D 1 8 D S 2 9 E 1 — 39 C6 D 2 5 P F 2 9 0 3 2 — 14 6 C6 D 1 0 D S 2 9 C 1 2- 1 4 3 7 2 7 3 - 1 39 C6 D 1 8 D S 2 9 E 3 — 39 C6 D 2 5 P F 2 9 0 3 3 — 14 6 C6 D 1 0 D S 2 9 C 3 — 39 C6 D 1 8 D S 2 9 E 4 — 40 C6 D 2 5 P F 2 9 0 4 2 — 14 8 C6 D 1 0 D S 2 9 C 4 2- 1 4 3 7 2 7 3 - 2 40 C6 D 1 8 P F 2 9 0 1 2 — 14 8 C6 D 2 5 P F 2 9 0 4 3 — 14 8 C6 D 1 0 D S 2 9 D 1 — 39 C6 D 1 8 P F 2 9 0 1 3 1- 1 4 3 7 2 6 2 - 3 14 8 C6 D 2 5 P F 2 9 1 3 2 — 14 8 C6 D 1 0 D S 2 9 D 3 — 39 C6 D 1 8 P F 2 9 0 2 2 — 14 6 C6 D 2 5 P F 2 9 1 3 3 — 14 8 196 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r C6 D 2 5 P F 2 9 1 4 2 — 14 6 C6 D 3 5 D S 2 9 B 4 — 40 C6 D 4 3 D S 2 9 E 1 — 39 C6 D 2 5 P F 2 9 1 4 3 — 14 6 C6 D 3 5 D S 2 9 C 1 — 39 C6 D 4 3 D S 2 9 E 3 — 39 C6 D 2 8 D S 2 9 A 1 — 39 C6 D 3 5 D S 2 9 C 3 — 39 C6 D 4 3 D S 2 9 E 4 — 40 C6 D 2 8 D S 2 9 A 3 — 39 C6 D 3 5 D S 2 9 C 4 — 40 C6 D 4 3 P F 2 9 0 1 2 — 14 8 C6 D 2 8 D S 2 9 A 4 — 40 C6 D 3 5 D S 2 9 D 1 — 39 C6 D 4 3 P F 2 9 0 1 3 3- 1 4 3 7 2 6 2 - 6 14 8 C6 D 2 8 D S 2 9 B 1 — 39 C6 D 3 5 D S 2 9 D 3 — 39 C6 D 4 3 P F 2 9 0 2 2 3- 1 4 3 7 2 6 2 - 8 14 6 C6 D 2 8 D S 2 9 B 3 — 39 C6 D 3 5 D S 2 9 D 4 — 40 C6 D 4 3 P F 2 9 0 2 3 3- 1 4 3 7 2 6 2 - 9 14 6 C6 D 2 8 D S 2 9 B 4 — 40 C6 D 3 5 D S 2 9 E 1 — 39 C6 D 4 3 P F 2 9 0 3 2 — 14 6 C6 D 2 8 D S 2 9 C 1 4- 1 4 3 7 2 7 3 - 4 39 C6 D 3 5 D S 2 9 E 3 — 39 C6 D 4 3 P F 2 9 0 3 3 — 14 6 C6 D 2 8 D S 2 9 C 3 4- 1 4 3 7 2 7 3 - 6 39 C6 D 3 5 D S 2 9 E 4 — 40 C6 D 4 3 P F 2 9 0 4 2 — 14 8 C6 D 2 8 D S 2 9 C 4 — 40 C6 D 3 5 P F 2 9 0 1 2 — 14 8 C6 D 4 3 P F 2 9 0 4 3 4- 1 4 3 7 2 6 2 - 0 14 8 C6 D 2 8 D S 2 9 D 1 4- 1 4 3 7 2 7 3 - 7 39 C6 D 3 5 P F 2 9 0 1 3 — 14 8 C6 D 4 3 P F 2 9 1 3 2 — 14 8 C6 D 2 8 D S 2 9 D 3 — 39 C6 D 3 5 P F 2 9 0 2 2 — 14 6 C6 D 4 3 P F 2 9 1 3 3 — 14 8 C6 D 2 8 D S 2 9 D 4 — 40 C6 D 3 5 P F 2 9 0 2 3 — 14 6 C6 D 4 3 P F 2 9 1 4 2 — 14 6 C6 D 2 8 D S 2 9 E 1 — 39 C6 D 3 5 P F 2 9 0 3 2 — 14 6 C6 D 4 3 P F 2 9 1 4 3 — 14 6 C6 D 2 8 D S 2 9 E 3 — 39 C6 D 3 5 P F 2 9 0 3 3 — 14 6 C6 D 5 0 D S 2 9 A 1 — 39 C6 D 2 8 D S 2 9 E 4 — 40 C6 D 3 5 P F 2 9 0 4 2 — 14 8 C6 D 5 0 D S 2 9 A 3 — 39 C6 D 2 8 P F 2 9 0 1 2 — 14 8 C6 D 3 5 P F 2 9 0 4 3 — 14 8 C6 D 5 0 D S 2 9 A 4 — 40 C6 D 2 8 P F 2 9 0 1 3 2- 1 4 3 7 2 6 2 - 4 14 8 C6 D 3 5 P F 2 9 1 3 2 — 14 8 C6 D 5 0 D S 2 9 B 1 — 39 C6 D 2 8 P F 2 9 0 2 2 — 14 6 C6 D 3 5 P F 2 9 1 3 3 — 14 8 C6 D 5 0 D S 2 9 B 3 — 39 C6 D 2 8 P F 2 9 0 2 3 2- 1 4 3 7 2 6 2 - 6 14 6 C6 D 3 5 P F 2 9 1 4 2 — 14 6 C6 D 5 0 D S 2 9 B 4 — 40 C6 D 2 8 P F 2 9 0 3 2 — 14 6 C6 D 3 5 P F 2 9 1 4 3 — 14 6 C6 D 5 0 D S 2 9 C 1 — 39 C6 D 2 8 P F 2 9 0 3 3 2- 1 4 3 7 2 6 2 - 7 14 6 C6 D 3 6 D S 2 9 A 1 — 39 C6 D 5 0 D S 2 9 C 3 — 39 C6 D 2 8 P F 2 9 0 4 2 — 14 8 C6 D 3 6 D S 2 9 A 3 5- 1 4 3 7 2 7 3 - 3 39 C6 D 5 0 D S 2 9 C 4 — 40 C6 D 2 8 P F 2 9 0 4 3 2- 1 4 3 7 2 6 2 - 8 14 8 C6 D 3 6 D S 2 9 A 4 — 40 C6 D 5 0 D S 2 9 D 1 — 39 C6 D 2 8 P F 2 9 1 3 2 — 14 8 C6 D 3 6 D S 2 9 B 1 — 39 C6 D 5 0 D S 2 9 D 3 — 39 C6 D 2 8 P F 2 9 1 3 3 — 14 8 C6 D 3 6 D S 2 9 B 3 — 39 C6 D 5 0 D S 2 9 D 4 — 40 C6 D 2 8 P F 2 9 1 4 2 — 14 6 C6 D 3 6 D S 2 9 B 4 — 40 C6 D 5 0 D S 2 9 E 1 — 39 C6 D 2 8 P F 2 9 1 4 3 — 14 6 C6 D 3 6 D S 2 9 C 1 5- 1 4 3 7 2 7 3 - 4 39 C6 D 5 0 D S 2 9 E 3 — 39 C6 D 3 0 D S 2 9 A 1 — 39 C6 D 3 6 D S 2 9 C 3 3- 1 4 3 7 2 6 4 - 3 39 C6 D 5 0 D S 2 9 E 4 — 40 C6 D 3 0 D S 2 9 A 3 — 39 C6 D 3 6 D S 2 9 C 4 — 40 C7 D 0 6 D S 2 9 A 1 — 36 C6 D 3 0 D S 2 9 A 4 — 40 C6 D 3 6 D S 2 9 D 1 5- 1 4 3 7 2 7 3 - 5 39 C7 D 0 6 D S 2 9 A 3 — 36 C6 D 3 0 D S 2 9 B 1 — 39 C6 D 3 6 D S 2 9 D 3 — 39 C7 D 0 6 D S 2 9 A 4 — 37 C6 D 3 0 D S 2 9 B 3 — 39 C6 D 3 6 D S 2 9 D 4 5- 1 4 3 7 2 7 3 - 6 40 C7 D 0 6 D S 2 9 B 1 — 36 C6 D 3 0 D S 2 9 B 4 — 40 C6 D 3 6 D S 2 9 E 1 — 39 C7 D 0 6 D S 2 9 B 3 — 36 C6 D 3 0 D S 2 9 C 1 4- 1 4 3 7 2 7 3 - 8 39 C6 D 3 6 D S 2 9 E 3 — 39 C7 D 0 6 D S 2 9 B 4 — 37 C6 D 3 0 D S 2 9 C 3 4- 1 4 3 7 2 7 3 - 9 39 C6 D 3 6 D S 2 9 E 4 5- 1 4 3 7 2 7 3 - 7 40 C7 D 0 6 D S 2 9 C 1 0- 1 4 3 7 2 7 4 - 3 36 C6 D 3 0 D S 2 9 C 4 — 40 C6 D 3 6 P F 2 9 0 1 2 — 14 8 C7 D 0 6 D S 2 9 C 3 — 36 C6 D 3 0 D S 2 9 D 1 — 39 C6 D 3 6 P F 2 9 0 1 3 3- 1 4 3 7 2 6 2 - 3 14 8 C7 D 0 6 D S 2 9 C 4 — 37 C6 D 3 0 D S 2 9 D 3 5- 1 4 3 7 2 7 3 - 0 39 C6 D 3 6 P F 2 9 0 2 2 — 14 6 C7 D 0 6 D S 2 9 D 1 — 36 C6 D 3 0 D S 2 9 D 4 5- 1 4 3 7 2 7 3 - 1 40 C6 D 3 6 P F 2 9 0 2 3 3- 1 4 3 7 2 6 2 - 4 14 6 C7 D 0 6 D S 2 9 D 3 — 36 C6 D 3 0 D S 2 9 E 1 — 39 C6 D 3 6 P F 2 9 0 3 2 — 14 6 C7 D 0 6 D S 2 9 D 4 — 37 C6 D 3 0 D S 2 9 E 3 — 39 C6 D 3 6 P F 2 9 0 3 3 — 14 6 C7 D 0 6 D S 2 9 E 1 — 36 C6 D 3 0 D S 2 9 E 4 — 40 C6 D 3 6 P F 2 9 0 4 2 — 14 8 C7 D 0 6 D S 2 9 E 3 — 36 C6 D 3 0 P F 2 9 0 1 2 — 14 8 C6 D 3 6 P F 2 9 0 4 3 — 14 8 C7 D 0 6 D S 2 9 E 4 — 37 C6 D 3 0 P F 2 9 0 1 3 — 14 8 C6 D 3 6 P F 2 9 1 3 2 — 14 8 C7 D 0 6 P F 2 9 0 1 2 — 14 4 C6 D 3 0 P F 2 9 0 2 2 — 14 6 C6 D 3 6 P F 2 9 1 3 3 — 14 8 C7 D 0 6 P F 2 9 0 1 3 — 14 4 C6 D 3 0 P F 2 9 0 2 3 2- 1 4 3 7 2 6 2 - 9 14 6 C6 D 3 6 P F 2 9 1 4 2 — 14 6 C7 D 0 6 P F 2 9 0 2 2 — 14 2 C6 D 3 0 P F 2 9 0 3 2 — 14 6 C6 D 3 6 P F 2 9 1 4 3 — 14 6 C7 D 0 6 P F 2 9 0 2 3 0- 1 4 3 7 2 6 3 - 7 14 2 C6 D 3 0 P F 2 9 0 3 3 — 14 6 C6 D 4 0 D S 2 9 A 1 — 39 C7 D 0 6 P F 2 9 0 3 2 — 14 2 C6 D 3 0 P F 2 9 0 4 2 — 14 8 C6 D 4 0 D S 2 9 A 3 — 39 C7 D 0 6 P F 2 9 0 3 3 — 14 2 C6 D 3 0 P F 2 9 0 4 3 — 14 8 C6 D 4 0 D S 2 9 A 4 — 40 C7 D 0 6 P F 2 9 0 4 2 — 14 4 C6 D 3 0 P F 2 9 1 3 2 — 14 8 C6 D 4 0 D S 2 9 B 1 — 39 C7 D 0 6 P F 2 9 0 4 3 0- 1 4 3 7 2 6 3 - 8 14 4 C6 D 3 0 P F 2 9 1 3 3 — 14 8 C6 D 4 0 D S 2 9 B 3 5- 1 4 3 7 2 7 3 - 8 39 C7 D 0 6 P F 2 9 1 3 2 — 14 4 C6 D 3 0 P F 2 9 1 4 2 — 14 6 C6 D 4 0 D S 2 9 B 4 — 40 C7 D 0 6 P F 2 9 1 3 3 — 14 4 C6 D 3 0 P F 2 9 1 4 3 — 14 6 C6 D 4 0 D S 2 9 C 1 — 39 C7 D 0 6 P F 2 9 1 4 2 — 14 2 C6 D 3 1 D S 2 9 A 1 5- 1 4 3 7 2 7 3 - 2 39 C6 D 4 0 D S 2 9 C 3 — 39 C7 D 0 6 P F 2 9 1 4 3 — 14 2 C6 D 3 1 D S 2 9 A 3 — 39 C6 D 4 0 D S 2 9 C 4 — 40 C7 D 1 0 D S 2 9 A 1 — 36 C6 D 3 1 D S 2 9 A 4 — 40 C6 D 4 0 D S 2 9 D 1 — 39 C7 D 1 0 D S 2 9 A 3 — 36 C6 D 3 1 D S 2 9 B 1 — 39 C6 D 4 0 D S 2 9 D 3 — 39 C7 D 1 0 D S 2 9 A 4 — 37 C6 D 3 1 D S 2 9 B 3 — 39 C6 D 4 0 D S 2 9 D 4 — 40 C7 D 1 0 D S 2 9 B 1 — 36 C6 D 3 1 D S 2 9 B 4 — 40 C6 D 4 0 D S 2 9 E 1 — 39 C7 D 1 0 D S 2 9 B 3 — 36 C6 D 3 1 D S 2 9 C 1 — 39 C6 D 4 0 D S 2 9 E 3 — 39 C7 D 1 0 D S 2 9 B 4 — 37 C6 D 3 1 D S 2 9 C 3 — 39 C6 D 4 0 D S 2 9 E 4 — 40 C7 D 1 0 D S 2 9 C 1 — 36 C6 D 3 1 D S 2 9 C 4 — 40 C6 D 4 0 P F 2 9 0 1 2 — 14 8 C7 D 1 0 D S 2 9 C 3 — 36 C6 D 3 1 D S 2 9 D 1 — 39 C6 D 4 0 P F 2 9 0 1 3 — 14 8 C7 D 1 0 D S 2 9 C 4 — 37 C6 D 3 1 D S 2 9 D 3 — 39 C6 D 4 0 P F 2 9 0 2 2 — 14 6 C7 D 1 0 D S 2 9 D 1 — 36 C6 D 3 1 D S 2 9 D 4 — 40 C6 D 4 0 P F 2 9 0 2 3 — 14 6 C7 D 1 0 D S 2 9 D 3 — 36 C6 D 3 1 D S 2 9 E 1 — 39 C6 D 4 0 P F 2 9 0 3 2 — 14 6 C7 D 1 0 D S 2 9 D 4 — 37 C6 D 3 1 D S 2 9 E 3 — 39 C6 D 4 0 P F 2 9 0 3 3 — 14 6 C7 D 1 0 D S 2 9 E 1 — 36 C6 D 3 1 D S 2 9 E 4 — 40 C6 D 4 0 P F 2 9 0 4 2 — 14 8 C7 D 1 0 D S 2 9 E 3 — 36 C6 D 3 1 P F 2 9 0 1 2 — 14 8 C6 D 4 0 P F 2 9 0 4 3 — 14 8 C7 D 1 0 D S 2 9 E 4 — 37 C6 D 3 1 P F 2 9 0 1 3 — 14 8 C6 D 4 0 P F 2 9 1 3 2 — 14 8 C7 D 1 0 P F 2 9 0 1 2 — 14 4 C6 D 3 1 P F 2 9 0 2 2 — 14 6 C6 D 4 0 P F 2 9 1 3 3 — 14 8 C7 D 1 0 P F 2 9 0 1 3 — 14 4 C6 D 3 1 P F 2 9 0 2 3 — 14 6 C6 D 4 0 P F 2 9 1 4 2 — 14 6 C7 D 1 0 P F 2 9 0 2 2 — 14 2 C6 D 3 1 P F 2 9 0 3 2 — 14 6 C6 D 4 0 P F 2 9 1 4 3 — 14 6 C7 D 1 0 P F 2 9 0 2 3 — 14 2 C6 D 3 1 P F 2 9 0 3 3 — 14 6 C6 D 4 3 D S 2 9 A 1 5- 1 4 3 7 2 7 3 - 9 39 C7 D 1 0 P F 2 9 0 3 2 — 14 2 C6 D 3 1 P F 2 9 0 4 2 — 14 8 C6 D 4 3 D S 2 9 A 3 — 39 C7 D 1 0 P F 2 9 0 3 3 — 14 2 C6 D 3 1 P F 2 9 0 4 3 — 14 8 C6 D 4 3 D S 2 9 A 4 6- 1 4 3 7 2 7 3 - 0 40 C7 D 1 0 P F 2 9 0 4 2 — 14 4 C6 D 3 1 P F 2 9 1 3 2 — 14 8 C6 D 4 3 D S 2 9 B 1 6- 1 4 3 7 2 7 3 - 1 39 C7 D 1 0 P F 2 9 0 4 3 — 14 4 C6 D 3 1 P F 2 9 1 3 3 — 14 8 C6 D 4 3 D S 2 9 B 3 — 39 C7 D 1 0 P F 2 9 1 3 2 — 14 4 C6 D 3 1 P F 2 9 1 4 2 — 14 6 C6 D 4 3 D S 2 9 B 4 — 40 C7 D 1 0 P F 2 9 1 3 3 — 14 4 C6 D 3 1 P F 2 9 1 4 3 — 14 6 C6 D 4 3 D S 2 9 C 1 6- 1 4 3 7 2 7 3 - 2 39 C7 D 1 0 P F 2 9 1 4 2 — 14 2 C6 D 3 5 D S 2 9 A 1 — 39 C6 D 4 3 D S 2 9 C 3 6- 1 4 3 7 2 7 3 - 4 39 C7 D 1 0 P F 2 9 1 4 3 — 14 2 C6 D 3 5 D S 2 9 A 3 — 39 C6 D 4 3 D S 2 9 C 4 — 40 C7 D 1 2 P F 2 9 0 1 2 — 14 4 C6 D 3 5 D S 2 9 A 4 — 40 C6 D 4 3 D S 2 9 D 1 — 39 C7 D 1 2 P F 2 9 0 1 3 — 14 4 C6 D 3 5 D S 2 9 B 1 — 39 C6 D 4 3 D S 2 9 D 3 6- 1 4 3 7 2 7 3 - 6 39 C7 D 1 2 P F 2 9 0 2 2 — 14 2 C6 D 3 5 D S 2 9 B 3 — 39 C6 D 4 3 D S 2 9 D 4 — 40 C7 D 1 2 P F 2 9 0 2 3 — 14 2 197 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r C7 D 1 2 P F 2 9 0 3 2 — 14 2 C7 D 2 2 D S 2 9 E 4 — 37 C7 D 3 0 P F 2 9 0 4 2 — 14 4 C7 D 1 2 P F 2 9 0 3 3 — 14 2 C7 D 2 2 P F 2 9 0 1 2 — 14 4 C7 D 3 0 P F 2 9 0 4 3 3- 1 4 3 7 2 6 3 - 3 14 4 C7 D 1 2 P F 2 9 0 4 2 — 14 4 C7 D 2 2 P F 2 9 0 1 3 2- 1 4 3 7 2 6 3 - 3 14 4 C7 D 3 0 P F 2 9 1 3 2 — 14 4 C7 D 1 2 P F 2 9 0 4 3 — 14 4 C7 D 2 2 P F 2 9 0 2 2 — 14 2 C7 D 3 0 P F 2 9 1 3 3 — 14 4 C7 D 1 2 P F 2 9 1 3 2 — 14 4 C7 D 2 2 P F 2 9 0 2 3 2- 1 4 3 7 2 6 3 - 4 14 2 C7 D 3 0 P F 2 9 1 4 2 — 14 2 C7 D 1 2 P F 2 9 1 3 3 — 14 4 C7 D 2 2 P F 2 9 0 3 2 — 14 2 C7 D 3 0 P F 2 9 1 4 3 — 14 2 C7 D 1 2 P F 2 9 1 4 2 — 14 2 C7 D 2 2 P F 2 9 0 3 3 — 14 2 C7 D 3 1 D S 2 9 A 1 — 36 C7 D 1 2 P F 2 9 1 4 3 — 14 2 C7 D 2 2 P F 2 9 0 4 2 — 14 4 C7 D 3 1 D S 2 9 A 3 2- 1 4 3 7 2 7 4 - 8 36 C7 D 1 5 D S 2 9 A 1 — 36 C7 D 2 2 P F 2 9 0 4 3 — 14 4 C7 D 3 1 D S 2 9 A 4 — 37 C7 D 1 5 D S 2 9 A 3 — 36 C7 D 2 2 P F 2 9 1 3 2 — 14 4 C7 D 3 1 D S 2 9 B 1 — 36 C7 D 1 5 D S 2 9 A 4 — 37 C7 D 2 2 P F 2 9 1 3 3 — 14 4 C7 D 3 1 D S 2 9 B 3 — 36 C7 D 1 5 D S 2 9 B 1 — 36 C7 D 2 2 P F 2 9 1 4 2 — 14 2 C7 D 3 1 D S 2 9 B 4 — 37 C7 D 1 5 D S 2 9 B 3 — 36 C7 D 2 2 P F 2 9 1 4 3 — 14 2 C7 D 3 1 D S 2 9 C 1 — 36 C7 D 1 5 D S 2 9 B 4 — 37 C7 D 2 5 D S 2 9 A 1 — 36 C7 D 3 1 D S 2 9 C 3 2- 1 4 3 7 2 7 4 - 9 36 C7 D 1 5 D S 2 9 C 1 0- 1 4 3 7 2 7 4 - 5 36 C7 D 2 5 D S 2 9 A 3 — 36 C7 D 3 1 D S 2 9 C 4 — 37 C7 D 1 5 D S 2 9 C 3 0- 1 4 3 7 2 7 4 - 7 36 C7 D 2 5 D S 2 9 A 4 — 37 C7 D 3 1 D S 2 9 D 1 — 36 C7 D 1 5 D S 2 9 C 4 — 37 C7 D 2 5 D S 2 9 B 1 — 36 C7 D 3 1 D S 2 9 D 3 3- 1 4 3 7 2 7 4 - 0 36 C7 D 1 5 D S 2 9 D 1 — 36 C7 D 2 5 D S 2 9 B 3 — 36 C7 D 3 1 D S 2 9 D 4 — 37 C7 D 1 5 D S 2 9 D 3 — 36 C7 D 2 5 D S 2 9 B 4 — 37 C7 D 3 1 D S 2 9 E 1 — 36 C7 D 1 5 D S 2 9 D 4 — 37 C7 D 2 5 D S 2 9 C 1 1- 1 4 3 7 2 7 4 - 1 36 C7 D 3 1 D S 2 9 E 3 — 36 C7 D 1 5 D S 2 9 E 1 — 36 C7 D 2 5 D S 2 9 C 3 — 36 C7 D 3 1 D S 2 9 E 4 — 37 C7 D 1 5 D S 2 9 E 3 — 36 C7 D 2 5 D S 2 9 C 4 — 37 C7 D 3 1 P F 2 9 0 1 2 — 14 4 C7 D 1 5 D S 2 9 E 4 — 37 C7 D 2 5 D S 2 9 D 1 — 36 C7 D 3 1 P F 2 9 0 1 3 — 14 4 C7 D 1 5 P F 2 9 0 1 2 — 14 4 C7 D 2 5 D S 2 9 D 3 — 36 C7 D 3 1 P F 2 9 0 2 2 — 14 2 C7 D 1 5 P F 2 9 0 1 3 — 14 4 C7 D 2 5 D S 2 9 D 4 — 37 C7 D 3 1 P F 2 9 0 2 3 — 14 2 C7 D 1 5 P F 2 9 0 2 2 — 14 2 C7 D 2 5 D S 2 9 E 1 — 36 C7 D 3 1 P F 2 9 0 3 2 — 14 2 C7 D 1 5 P F 2 9 0 2 3 14 2 C7 D 2 5 D S 2 9 E 3 — 36 C7 D 3 1 P F 2 9 0 3 3 — 14 2 C7 D 1 5 P F 2 9 0 3 2 — 14 2 C7 D 2 5 D S 2 9 E 4 — 37 C7 D 3 1 P F 2 9 0 4 2 — 14 4 C7 D 1 5 P F 2 9 0 3 3 — 14 2 C7 D 2 5 P F 2 9 0 1 2 — 14 4 C7 D 3 1 P F 2 9 0 4 3 — 14 4 C7 D 1 5 P F 2 9 0 4 2 — 14 4 C7 D 2 5 P F 2 9 0 1 3 — 14 4 C7 D 3 1 P F 2 9 1 3 2 — 14 4 C7 D 1 5 P F 2 9 0 4 3 14 4 C7 D 2 5 P F 2 9 0 2 2 — 14 2 C7 D 3 1 P F 2 9 1 3 3 — 14 4 C7 D 1 5 P F 2 9 1 3 2 — 14 4 C7 D 2 5 P F 2 9 0 2 3 — 14 2 C7 D 3 1 P F 2 9 1 4 2 — 14 2 C7 D 1 5 P F 2 9 1 3 3 — 14 4 C7 D 2 5 P F 2 9 0 3 2 — 14 2 C7 D 3 1 P F 2 9 1 4 3 — 14 2 C7 D 1 5 P F 2 9 1 4 2 — 14 2 C7 D 2 5 P F 2 9 0 3 3 — 14 2 C7 D 3 5 D S 2 9 A 1 — 36 C7 D 1 5 P F 2 9 1 4 3 — 14 2 C7 D 2 5 P F 2 9 0 4 2 — 14 4 C7 D 3 5 D S 2 9 A 3 — 36 C7 D 1 8 D S 2 9 A 1 — 36 C7 D 2 5 P F 2 9 0 4 3 — 14 4 C7 D 3 5 D S 2 9 A 4 — 37 C7 D 1 8 D S 2 9 A 3 — 36 C7 D 2 5 P F 2 9 1 3 2 — 14 4 C7 D 3 5 D S 2 9 B 1 — 36 C7 D 1 8 D S 2 9 A 4 — 37 C7 D 2 5 P F 2 9 1 3 3 — 14 4 C7 D 3 5 D S 2 9 B 3 — 36 C7 D 1 8 D S 2 9 B 1 — 36 C7 D 2 5 P F 2 9 1 4 2 — 14 2 C7 D 3 5 D S 2 9 B 4 — 37 C7 D 1 8 D S 2 9 B 3 — 36 C7 D 2 5 P F 2 9 1 4 3 — 14 2 C7 D 3 5 D S 2 9 C 1 3- 1 4 3 7 2 7 4 - 1 36 C7 D 1 8 D S 2 9 B 4 — 37 C7 D 2 8 D S 2 9 A 1 1- 1 4 3 7 2 7 4 - 3 36 C7 D 3 5 D S 2 9 C 3 — 36 C7 D 1 8 D S 2 9 C 1 — 36 C7 D 2 8 D S 2 9 A 3 1- 1 4 3 7 2 7 4 - 4 36 C7 D 3 5 D S 2 9 C 4 — 37 C7 D 1 8 D S 2 9 C 3 0- 1 4 3 7 2 7 4 - 8 36 C7 D 2 8 D S 2 9 A 4 — 37 C7 D 3 5 D S 2 9 D 1 — 36 C7 D 1 8 D S 2 9 C 4 — 37 C7 D 2 8 D S 2 9 B 1 — 36 C7 D 3 5 D S 2 9 D 3 — 36 C7 D 1 8 D S 2 9 D 1 — 36 C7 D 2 8 D S 2 9 B 3 1- 1 4 3 7 2 7 4 - 6 36 C7 D 3 5 D S 2 9 D 4 — 37 C7 D 1 8 D S 2 9 D 3 — 36 C7 D 2 8 D S 2 9 B 4 — 37 C7 D 3 5 D S 2 9 E 1 — 36 C7 D 1 8 D S 2 9 D 4 — 37 C7 D 2 8 D S 2 9 C 1 1- 1 4 3 7 2 7 4 - 7 36 C7 D 3 5 D S 2 9 E 3 — 36 C7 D 1 8 D S 2 9 E 1 — 36 C7 D 2 8 D S 2 9 C 3 1- 1 4 3 7 2 7 4 - 8 36 C7 D 3 5 D S 2 9 E 4 — 37 C7 D 1 8 D S 2 9 E 3 — 36 C7 D 2 8 D S 2 9 C 4 — 37 C7 D 3 5 P F 2 9 0 1 2 3- 1 4 3 7 2 6 3 - 9 14 4 C7 D 1 8 D S 2 9 E 4 — 37 C7 D 2 8 D S 2 9 D 1 1- 1 4 3 7 2 7 4 - 9 36 C7 D 3 5 P F 2 9 0 1 3 4- 1 4 3 7 2 6 3 - 0 14 4 C7 D 1 8 P F 2 9 0 1 2 1- 1 4 3 7 2 6 3 - 4 14 4 C7 D 2 8 D S 2 9 D 3 2- 1 4 3 7 2 7 4 - 0 36 C7 D 3 5 P F 2 9 0 2 2 — 14 2 C7 D 1 8 P F 2 9 0 1 3 1- 1 4 3 7 2 6 3 - 5 14 4 C7 D 2 8 D S 2 9 D 4 — 37 C7 D 3 5 P F 2 9 0 2 3 — 14 2 C7 D 1 8 P F 2 9 0 2 2 1- 1 4 3 7 2 6 3 - 6 14 2 C7 D 2 8 D S 2 9 E 1 — 36 C7 D 3 5 P F 2 9 0 3 2 — 14 2 C7 D 1 8 P F 2 9 0 2 3 1- 1 4 3 7 2 6 3 - 7 14 2 C7 D 2 8 D S 2 9 E 3 2- 1 4 3 7 2 7 4 - 2 36 C7 D 3 5 P F 2 9 0 3 3 — 14 2 C7 D 1 8 P F 2 9 0 3 2 — 14 2 C7 D 2 8 D S 2 9 E 4 — 37 C7 D 3 5 P F 2 9 0 4 2 — 14 4 C7 D 1 8 P F 2 9 0 3 3 — 14 2 C7 D 2 8 P F 2 9 0 1 2 2- 1 4 3 7 2 6 3 - 7 14 4 C7 D 3 5 P F 2 9 0 4 3 — 14 4 C7 D 1 8 P F 2 9 0 4 2 — 14 4 C7 D 2 8 P F 2 9 0 1 3 2- 1 4 3 7 2 6 3 - 8 14 4 C7 D 3 5 P F 2 9 1 3 2 — 14 4 C7 D 1 8 P F 2 9 0 4 3 1- 1 4 3 7 2 6 3 - 8 14 4 C7 D 2 8 P F 2 9 0 2 2 — 14 2 C7 D 3 5 P F 2 9 1 3 3 — 14 4 C7 D 1 8 P F 2 9 1 3 2 — 14 4 C7 D 2 8 P F 2 9 0 2 3 2- 1 4 3 7 2 6 3 - 9 14 2 C7 D 3 5 P F 2 9 1 4 2 — 14 2 C7 D 1 8 P F 2 9 1 3 3 — 14 4 C7 D 2 8 P F 2 9 0 3 2 2- 1 4 3 7 2 7 4 - 3 14 2 C7 D 3 5 P F 2 9 1 4 3 — 14 2 C7 D 1 8 P F 2 9 1 4 2 — 14 2 C7 D 2 8 P F 2 9 0 3 3 — 14 2 C7 D 3 6 D S 2 9 A 1 — 36 C7 D 1 8 P F 2 9 1 4 3 — 14 2 C7 D 2 8 P F 2 9 0 4 2 — 14 4 C7 D 3 6 D S 2 9 A 3 — 36 C7 D 2 0 P F 2 9 0 1 2 1- 1 4 3 7 2 6 3 - 9 14 4 C7 D 2 8 P F 2 9 0 4 3 — 14 4 C7 D 3 6 D S 2 9 A 4 — 37 C7 D 2 0 P F 2 9 0 1 3 2- 1 4 3 7 2 6 3 - 0 14 4 C7 D 2 8 P F 2 9 1 3 2 — 14 4 C7 D 3 6 D S 2 9 B 1 — 36 C7 D 2 0 P F 2 9 0 2 2 — 14 2 C7 D 2 8 P F 2 9 1 3 3 — 14 4 C7 D 3 6 D S 2 9 B 3 — 36 C7 D 2 0 P F 2 9 0 2 3 2- 1 4 3 7 2 6 3 - 1 14 2 C7 D 2 8 P F 2 9 1 4 2 — 14 2 C7 D 3 6 D S 2 9 B 4 — 37 C7 D 2 0 P F 2 9 0 3 2 — 14 2 C7 D 2 8 P F 2 9 1 4 3 — 14 2 C7 D 3 6 D S 2 9 C 1 3- 1 4 3 7 2 7 4 - 2 36 C7 D 2 0 P F 2 9 0 3 3 — 14 2 C7 D 3 0 D S 2 9 A 1 — 36 C7 D 3 6 D S 2 9 C 3 3- 1 4 3 7 2 7 4 - 3 36 C7 D 2 0 P F 2 9 0 4 2 — 14 4 C7 D 3 0 D S 2 9 A 3 2- 1 4 3 7 2 7 4 - 4 36 C7 D 3 6 D S 2 9 C 4 — 37 C7 D 2 0 P F 2 9 0 4 3 — 14 4 C7 D 3 0 D S 2 9 A 4 — 37 C7 D 3 6 D S 2 9 D 1 — 36 C7 D 2 0 P F 2 9 1 3 2 — 14 4 C7 D 3 0 D S 2 9 B 1 — 36 C7 D 3 6 D S 2 9 D 3 3- 1 4 3 7 2 7 4 - 4 36 C7 D 2 0 P F 2 9 1 3 3 — 14 4 C7 D 3 0 D S 2 9 B 3 — 36 C7 D 3 6 D S 2 9 D 4 — 37 C7 D 2 0 P F 2 9 1 4 2 — 14 2 C7 D 3 0 D S 2 9 B 4 — 37 C7 D 3 6 D S 2 9 E 1 — 36 C7 D 2 0 P F 2 9 1 4 3 — 14 2 C7 D 3 0 D S 2 9 C 1 — 36 C7 D 3 6 D S 2 9 E 3 — 36 C7 D 2 2 D S 2 9 A 1 — 36 C7 D 3 0 D S 2 9 C 3 2- 1 4 3 7 2 7 4 - 5 36 C7 D 3 6 D S 2 9 E 4 — 37 C7 D 2 2 D S 2 9 A 3 — 36 C7 D 3 0 D S 2 9 C 4 2- 1 4 3 7 2 7 4 - 6 37 C7 D 3 6 P F 2 9 0 1 2 4- 1 4 3 7 2 6 3 - 1 14 4 C7 D 2 2 D S 2 9 A 4 — 37 C7 D 3 0 D S 2 9 D 1 — 36 C7 D 3 6 P F 2 9 0 1 3 4- 1 4 3 7 2 6 3 - 2 14 4 C7 D 2 2 D S 2 9 B 1 — 36 C7 D 3 0 D S 2 9 D 3 — 36 C7 D 3 6 P F 2 9 0 2 2 — 14 2 C7 D 2 2 D S 2 9 B 3 — 36 C7 D 3 0 D S 2 9 D 4 — 37 C7 D 3 6 P F 2 9 0 2 3 — 14 2 C7 D 2 2 D S 2 9 B 4 — 37 C7 D 3 0 D S 2 9 E 1 — 36 C7 D 3 6 P F 2 9 0 3 2 — 14 2 C7 D 2 2 D S 2 9 C 1 0- 1 4 3 7 2 7 4 - 9 36 C7 D 3 0 D S 2 9 E 3 — 36 C7 D 3 6 P F 2 9 0 3 3 4- 1 4 3 7 2 6 3 - 3 14 2 C7 D 2 2 D S 2 9 C 3 — 36 C7 D 3 0 D S 2 9 E 4 — 37 C7 D 3 6 P F 2 9 0 4 2 — 14 4 C7 D 2 2 D S 2 9 C 4 — 37 C7 D 3 0 P F 2 9 0 1 2 — 14 4 C7 D 3 6 P F 2 9 0 4 3 — 14 4 C7 D 2 2 D S 2 9 D 1 — 36 C7 D 3 0 P F 2 9 0 1 3 3- 1 4 3 7 2 6 3 - 1 14 4 C7 D 3 6 P F 2 9 1 3 2 — 14 4 C7 D 2 2 D S 2 9 D 3 1- 1 4 3 7 2 7 4 - 0 36 C7 D 3 0 P F 2 9 0 2 2 — 14 2 C7 D 3 6 P F 2 9 1 3 3 — 14 4 C7 D 2 2 D S 2 9 D 4 — 37 C7 D 3 0 P F 2 9 0 2 3 3- 1 4 3 7 2 6 3 - 2 14 2 C7 D 3 6 P F 2 9 1 4 2 — 14 2 C7 D 2 2 D S 2 9 E 1 — 36 C7 D 3 0 P F 2 9 0 3 2 2- 1 4 3 7 2 7 4 - 7 14 2 C7 D 3 6 P F 2 9 1 4 3 — 14 2 C7 D 2 2 D S 2 9 E 3 — 36 C7 D 3 0 P F 2 9 0 3 3 — 14 2 C7 D 4 0 D S 2 9 A 1 — 36 198 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r C7 D 4 0 D S 2 9 A 3 — 36 C8 D 0 6 D S 2 9 C 3 3- 1 4 3 7 2 7 5 - 1 32 C8 D 1 5 P F 2 9 0 1 2 — 14 0 C7 D 4 0 D S 2 9 A 4 — 37 C8 D 0 6 D S 2 9 D 1 — 31 C8 D 1 5 P F 2 9 0 1 3 2- 1 4 3 7 2 6 0 - 7 14 0 C7 D 4 0 D S 2 9 B 1 — 36 C8 D 0 6 D S 2 9 D 2 — 31 C8 D 1 5 P F 2 9 0 2 2 — 13 8 C7 D 4 0 D S 2 9 B 3 — 36 C8 D 0 6 D S 2 9 D 3 — 32 C8 D 1 5 P F 2 9 0 2 3 2- 1 4 3 7 2 6 0 - 9 13 8 C7 D 4 0 D S 2 9 B 4 — 37 C8 D 0 6 D S 2 9 E 1 3- 1 4 3 7 2 7 5 - 2 31 C8 D 1 5 P F 2 9 0 3 2 — 13 8 C7 D 4 0 D S 2 9 C 1 3- 1 4 3 7 2 7 4 - 6 36 C8 D 0 6 D S 2 9 E 2 — 31 C8 D 1 5 P F 2 9 0 3 3 — 13 8 C7 D 4 0 D S 2 9 C 3 3- 1 4 3 7 2 7 4 - 7 36 C8 D 0 6 D S 2 9 E 3 — 32 C8 D 1 5 P F 2 9 0 4 2 — 14 0 C7 D 4 0 D S 2 9 C 4 — 37 C8 D 0 6 P F 2 9 0 1 2 — 14 0 C8 D 1 5 P F 2 9 0 4 3 3- 1 4 3 7 2 6 0 - 0 14 0 C7 D 4 0 D S 2 9 D 1 — 36 C8 D 0 6 P F 2 9 0 1 3 1- 1 4 3 7 2 6 0 - 4 14 0 C8 D 1 5 P F 2 9 1 3 2 — 14 0 C7 D 4 0 D S 2 9 D 3 3- 1 4 3 7 2 7 4 - 8 36 C8 D 0 6 P F 2 9 0 2 2 — 13 8 C8 D 1 5 P F 2 9 1 3 3 — 14 0 C7 D 4 0 D S 2 9 D 4 — 37 C8 D 0 6 P F 2 9 0 2 3 — 13 8 C8 D 1 5 P F 2 9 1 4 2 — 13 8 C7 D 4 0 D S 2 9 E 1 — 36 C8 D 0 6 P F 2 9 0 3 2 — 13 8 C8 D 1 5 P F 2 9 1 4 3 — 13 8 C7 D 4 0 D S 2 9 E 3 — 36 C8 D 0 6 P F 2 9 0 3 3 — 13 8 C8 D 1 8 D S 2 9 A 1 — 31 C7 D 4 0 D S 2 9 E 4 — 37 C8 D 0 6 P F 2 9 0 4 2 — 14 0 C8 D 1 8 D S 2 9 A 2 — 31 C7 D 4 0 P F 2 9 0 1 2 4- 1 4 3 7 2 6 3 - 4 14 4 C8 D 0 6 P F 2 9 0 4 3 1- 1 4 3 7 2 6 0 - 5 14 0 C8 D 1 8 D S 2 9 A 3 — 32 C7 D 4 0 P F 2 9 0 1 3 4- 1 4 3 7 2 6 3 - 5 14 4 C8 D 0 6 P F 2 9 1 3 2 — 14 0 C8 D 1 8 D S 2 9 B 1 — 31 C7 D 4 0 P F 2 9 0 2 2 — 14 2 C8 D 0 6 P F 2 9 1 3 3 — 14 0 C8 D 1 8 D S 2 9 B 2 — 31 C7 D 4 0 P F 2 9 0 2 3 4- 1 4 3 7 2 6 3 - 6 14 2 C8 D 0 6 P F 2 9 1 4 2 — 13 8 C8 D 1 8 D S 2 9 B 3 — 32 C7 D 4 0 P F 2 9 0 3 2 4- 1 4 3 7 2 6 3 - 7 14 2 C8 D 0 6 P F 2 9 1 4 3 — 13 8 C8 D 1 8 D S 2 9 C 1 5- 1 4 3 7 2 7 5 - 9 31 C7 D 4 0 P F 2 9 0 3 3 — 14 2 C8 D 1 0 D S 2 9 A 1 — 31 C8 D 1 8 D S 2 9 C 2 — 31 C7 D 4 0 P F 2 9 0 4 2 — 14 4 C8 D 1 0 D S 2 9 A 2 — 31 C8 D 1 8 D S 2 9 C 3 6- 1 4 3 7 2 7 5 - 1 32 C7 D 4 0 P F 2 9 0 4 3 4- 1 4 3 7 2 6 3 - 8 14 4 C8 D 1 0 D S 2 9 A 3 3- 1 4 3 7 2 7 5 - 5 32 C8 D 1 8 D S 2 9 D 1 6- 1 4 3 7 2 7 5 - 2 31 C7 D 4 0 P F 2 9 1 3 2 — 14 4 C8 D 1 0 D S 2 9 B 1 — 31 C8 D 1 8 D S 2 9 D 2 — 31 C7 D 4 0 P F 2 9 1 3 3 — 14 4 C8 D 1 0 D S 2 9 B 2 — 31 C8 D 1 8 D S 2 9 D 3 6- 1 4 3 7 2 7 5 - 3 32 C7 D 4 0 P F 2 9 1 4 2 — 14 2 C8 D 1 0 D S 2 9 B 3 — 32 C8 D 1 8 D S 2 9 E 1 6- 1 4 3 7 2 7 5 - 4 31 C7 D 4 0 P F 2 9 1 4 3 — 14 2 C8 D 1 0 D S 2 9 C 1 3- 1 4 3 7 2 7 5 - 6 31 C8 D 1 8 D S 2 9 E 2 — 31 C7 D 4 3 D S 2 9 A 1 — 36 C8 D 1 0 D S 2 9 C 2 3- 1 4 3 7 2 7 5 - 8 31 C8 D 1 8 D S 2 9 E 3 — 32 C7 D 4 3 D S 2 9 A 3 — 36 C8 D 1 0 D S 2 9 C 3 3- 1 4 3 7 2 7 5 - 9 32 C8 D 2 0 D S 2 9 A 1 — 31 C7 D 4 3 D S 2 9 A 4 — 37 C8 D 1 0 D S 2 9 D 1 4- 1 4 3 7 2 7 5 - 0 31 C8 D 2 0 D S 2 9 A 2 — 31 C7 D 4 3 D S 2 9 B 1 — 36 C8 D 1 0 D S 2 9 D 2 — 31 C8 D 2 0 D S 2 9 A 3 — 32 C7 D 4 3 D S 2 9 B 3 — 36 C8 D 1 0 D S 2 9 D 3 4- 1 4 3 7 2 7 5 - 1 32 C8 D 2 0 D S 2 9 B 1 — 31 C7 D 4 3 D S 2 9 B 4 — 37 C8 D 1 0 D S 2 9 E 1 — 31 C8 D 2 0 D S 2 9 B 2 — 31 C7 D 4 3 D S 2 9 C 1 3- 1 4 3 7 2 7 4 - 9 36 C8 D 1 0 D S 2 9 E 2 — 31 C8 D 2 0 D S 2 9 B 3 — 32 C7 D 4 3 D S 2 9 C 3 4- 1 4 3 7 2 7 4 - 0 36 C8 D 1 0 D S 2 9 E 3 — 32 C8 D 2 0 D S 2 9 C 1 6- 1 4 3 7 2 7 5 - 6 31 C7 D 4 3 D S 2 9 C 4 — 37 C8 D 1 0 P F 2 9 0 1 2 — 14 0 C8 D 2 0 D S 2 9 C 2 — 31 C7 D 4 3 D S 2 9 D 1 — 36 C8 D 1 0 P F 2 9 0 1 3 2- 1 4 3 7 2 6 0 - 0 14 0 C8 D 2 0 D S 2 9 C 3 6- 1 4 3 7 2 7 5 - 8 32 C7 D 4 3 D S 2 9 D 3 — 36 C8 D 1 0 P F 2 9 0 2 2 — 13 8 C8 D 2 0 D S 2 9 D 1 6- 1 4 3 7 2 7 5 - 9 31 C7 D 4 3 D S 2 9 D 4 4- 1 4 3 7 2 7 4 - 1 37 C8 D 1 0 P F 2 9 0 2 3 2- 1 4 3 7 2 6 0 - 2 13 8 C8 D 2 0 D S 2 9 D 2 — 31 C7 D 4 3 D S 2 9 E 1 — 36 C8 D 1 0 P F 2 9 0 3 2 — 13 8 C8 D 2 0 D S 2 9 D 3 7- 1 4 3 7 2 7 5 - 0 32 C7 D 4 3 D S 2 9 E 3 — 36 C8 D 1 0 P F 2 9 0 3 3 — 13 8 C8 D 2 0 D S 2 9 E 1 — 31 C7 D 4 3 D S 2 9 E 4 — 37 C8 D 1 0 P F 2 9 0 4 2 — 14 0 C8 D 2 0 D S 2 9 E 2 — 31 C7 D 4 3 P F 2 9 0 1 2 — 14 4 C8 D 1 0 P F 2 9 0 4 3 2- 1 4 3 7 2 6 0 - 3 14 0 C8 D 2 0 D S 2 9 E 3 — 32 C7 D 4 3 P F 2 9 0 1 3 5- 1 4 3 7 2 6 3 - 0 14 4 C8 D 1 0 P F 2 9 1 3 2 — 14 0 C8 D 2 0 P F 2 9 0 1 2 — 14 0 C7 D 4 3 P F 2 9 0 2 2 — 14 2 C8 D 1 0 P F 2 9 1 3 3 — 14 0 C8 D 2 0 P F 2 9 0 1 3 — 14 0 C7 D 4 3 P F 2 9 0 2 3 — 14 2 C8 D 1 0 P F 2 9 1 4 2 — 13 8 C8 D 2 0 P F 2 9 0 2 2 — 13 8 C7 D 4 3 P F 2 9 0 3 2 — 14 2 C8 D 1 0 P F 2 9 1 4 3 — 13 8 C8 D 2 0 P F 2 9 0 2 3 3- 1 4 3 7 2 6 0 - 5 13 8 C7 D 4 3 P F 2 9 0 3 3 — 14 2 C8 D 1 2 D S 2 9 A 1 — 31 C8 D 2 0 P F 2 9 0 3 2 — 13 8 C7 D 4 3 P F 2 9 0 4 2 — 14 4 C8 D 1 2 D S 2 9 A 2 — 31 C8 D 2 0 P F 2 9 0 3 3 — 13 8 C7 D 4 3 P F 2 9 0 4 3 — 14 4 C8 D 1 2 D S 2 9 A 3 — 32 C8 D 2 0 P F 2 9 0 4 2 — 14 0 C7 D 4 3 P F 2 9 1 3 2 — 14 4 C8 D 1 2 D S 2 9 B 1 — 31 C8 D 2 0 P F 2 9 0 4 3 3- 1 4 3 7 2 6 0 - 6 14 0 C7 D 4 3 P F 2 9 1 3 3 — 14 4 C8 D 1 2 D S 2 9 B 2 — 31 C8 D 2 0 P F 2 9 1 3 2 — 14 0 C7 D 4 3 P F 2 9 1 4 2 — 14 2 C8 D 1 2 D S 2 9 B 3 — 32 C8 D 2 0 P F 2 9 1 3 3 — 14 0 C7 D 4 3 P F 2 9 1 4 3 — 14 2 C8 D 1 2 D S 2 9 C 1 4- 1 4 3 7 2 7 5 - 5 31 C8 D 2 0 P F 2 9 1 4 2 — 13 8 C7 D 5 0 D S 2 9 A 1 — 36 C8 D 1 2 D S 2 9 C 2 — 31 C8 D 2 0 P F 2 9 1 4 3 — 13 8 C7 D 5 0 D S 2 9 A 3 4- 1 4 3 7 2 7 4 - 3 36 C8 D 1 2 D S 2 9 C 3 4- 1 4 3 7 2 7 5 - 7 32 C8 D 2 2 D S 2 9 A 1 7- 1 4 3 7 2 7 5 - 1 31 C7 D 5 0 D S 2 9 A 4 — 37 C8 D 1 2 D S 2 9 D 1 4- 1 4 3 7 2 7 5 - 8 31 C8 D 2 2 D S 2 9 A 2 — 31 C7 D 5 0 D S 2 9 B 1 — 36 C8 D 1 2 D S 2 9 D 2 — 31 C8 D 2 2 D S 2 9 A 3 7- 1 4 3 7 2 7 5 - 2 32 C7 D 5 0 D S 2 9 B 3 5- 1 4 3 7 2 6 3 - 1 36 C8 D 1 2 D S 2 9 D 3 — 32 C8 D 2 2 D S 2 9 B 1 7- 1 4 3 7 2 7 5 - 3 31 C7 D 5 0 D S 2 9 B 4 — 37 C8 D 1 2 D S 2 9 E 1 5- 1 4 3 7 2 7 4 - 1 31 C8 D 2 2 D S 2 9 B 2 — 31 C7 D 5 0 D S 2 9 C 1 4- 1 4 3 7 2 7 4 - 4 36 C8 D 1 2 D S 2 9 E 2 — 31 C8 D 2 2 D S 2 9 B 3 — 32 C7 D 5 0 D S 2 9 C 3 4- 1 4 3 7 2 7 4 - 5 36 C8 D 1 2 D S 2 9 E 3 — 32 C8 D 2 2 D S 2 9 C 1 7- 1 4 3 7 2 7 5 - 4 31 C7 D 5 0 D S 2 9 C 4 4- 1 4 3 7 2 7 4 - 6 37 C8 D 1 2 P F 2 9 0 1 2 — 14 0 C8 D 2 2 D S 2 9 C 2 — 31 C7 D 5 0 D S 2 9 D 1 — 36 C8 D 1 2 P F 2 9 0 1 3 2- 1 4 3 7 2 6 0 - 4 14 0 C8 D 2 2 D S 2 9 C 3 7- 1 4 3 7 2 7 5 - 6 32 C7 D 5 0 D S 2 9 D 3 4- 1 4 3 7 2 7 4 - 8 36 C8 D 1 2 P F 2 9 0 2 2 — 13 8 C8 D 2 2 D S 2 9 D 1 7- 1 4 3 7 2 7 5 - 7 31 C7 D 5 0 D S 2 9 D 4 — 37 C8 D 1 2 P F 2 9 0 2 3 2- 1 4 3 7 2 6 0 - 5 13 8 C8 D 2 2 D S 2 9 D 2 — 31 C7 D 5 0 D S 2 9 E 1 5- 1 4 3 7 2 7 4 - 0 36 C8 D 1 2 P F 2 9 0 3 2 — 13 8 C8 D 2 2 D S 2 9 D 3 — 32 C7 D 5 0 D S 2 9 E 3 — 36 C8 D 1 2 P F 2 9 0 3 3 — 13 8 C8 D 2 2 D S 2 9 E 1 — 31 C7 D 5 0 D S 2 9 E 4 — 37 C8 D 1 2 P F 2 9 0 4 2 — 14 0 C8 D 2 2 D S 2 9 E 2 — 31 C7 D 5 0 P F 2 9 0 1 2 — 14 4 C8 D 1 2 P F 2 9 0 4 3 2- 1 4 3 7 2 6 0 - 6 14 0 C8 D 2 2 D S 2 9 E 3 — 32 C7 D 5 0 P F 2 9 0 1 3 5- 1 4 3 7 2 6 3 - 2 14 4 C8 D 1 2 P F 2 9 1 3 2 — 14 0 C8 D 2 2 P F 2 9 0 1 2 — 14 0 C7 D 5 0 P F 2 9 0 2 2 — 14 2 C8 D 1 2 P F 2 9 1 3 3 — 14 0 C8 D 2 2 P F 2 9 0 1 3 3- 1 4 3 7 2 6 0 - 8 14 0 C7 D 5 0 P F 2 9 0 2 3 — 14 2 C8 D 1 2 P F 2 9 1 4 2 — 13 8 C8 D 2 2 P F 2 9 0 2 2 — 13 8 C7 D 5 0 P F 2 9 0 3 2 — 14 2 C8 D 1 2 P F 2 9 1 4 3 — 13 8 C8 D 2 2 P F 2 9 0 2 3 4- 1 4 3 7 2 6 0 - 0 13 8 C7 D 5 0 P F 2 9 0 3 3 5- 1 4 3 7 2 6 3 - 3 14 2 C8 D 1 5 D S 2 9 A 1 — 31 C8 D 2 2 P F 2 9 0 3 2 — 13 8 C7 D 5 0 P F 2 9 0 4 2 — 14 4 C8 D 1 5 D S 2 9 A 2 — 31 C8 D 2 2 P F 2 9 0 3 3 — 13 8 C7 D 5 0 P F 2 9 0 4 3 5- 1 4 3 7 2 6 3 - 4 14 4 C8 D 1 5 D S 2 9 A 3 — 32 C8 D 2 2 P F 2 9 0 4 2 — 14 0 C7 D 5 0 P F 2 9 1 3 2 — 14 4 C8 D 1 5 D S 2 9 B 1 — 31 C8 D 2 2 P F 2 9 0 4 3 4- 1 4 3 7 2 6 0 - 1 14 0 C7 D 5 0 P F 2 9 1 3 3 — 14 4 C8 D 1 5 D S 2 9 B 2 — 31 C8 D 2 2 P F 2 9 1 3 2 — 14 0 C7 D 5 0 P F 2 9 1 4 2 — 14 2 C8 D 1 5 D S 2 9 B 3 5- 1 4 3 7 2 7 5 - 1 32 C8 D 2 2 P F 2 9 1 3 3 — 14 0 C7 D 5 0 P F 2 9 1 4 3 5- 1 4 3 7 2 6 3 - 7 14 2 C8 D 1 5 D S 2 9 C 1 5- 1 4 3 7 2 7 5 - 2 31 C8 D 2 2 P F 2 9 1 4 2 — 13 8 C8 D 0 6 D S 2 9 A 1 — 31 C8 D 1 5 D S 2 9 C 2 — 31 C8 D 2 2 P F 2 9 1 4 3 — 13 8 C8 D 0 6 D S 2 9 A 2 — 31 C8 D 1 5 D S 2 9 C 3 5- 1 4 3 7 2 7 5 - 4 32 C8 D 2 5 D S 2 9 A 1 7- 1 4 3 7 2 7 5 - 8 31 C8 D 0 6 D S 2 9 A 3 — 32 C8 D 1 5 D S 2 9 D 1 5- 1 4 3 7 2 7 5 - 5 31 C8 D 2 5 D S 2 9 A 2 — 31 C8 D 0 6 D S 2 9 B 1 — 31 C8 D 1 5 D S 2 9 D 2 5- 1 4 3 7 2 7 5 - 6 31 C8 D 2 5 D S 2 9 A 3 7- 1 4 3 7 2 7 5 - 9 32 C8 D 0 6 D S 2 9 B 2 — 31 C8 D 1 5 D S 2 9 D 3 — 32 C8 D 2 5 D S 2 9 B 1 — 31 C8 D 0 6 D S 2 9 B 3 — 32 C8 D 1 5 D S 2 9 E 1 — 31 C8 D 2 5 D S 2 9 B 2 — 31 C8 D 0 6 D S 2 9 C 1 2- 1 4 3 7 2 7 5 - 9 31 C8 D 1 5 D S 2 9 E 2 — 31 C8 D 2 5 D S 2 9 B 3 — 32 C8 D 0 6 D S 2 9 C 2 3- 1 4 3 7 2 7 5 - 0 31 C8 D 1 5 D S 2 9 E 3 — 32 C8 D 2 5 D S 2 9 C 1 8- 1 4 3 7 2 7 5 - 0 31 199 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r C8 D 2 5 D S 2 9 C 2 — 31 C8 D 3 1 D S 2 9 E 3 — 32 C8 D 4 0 P F 2 9 0 4 2 — 14 0 C8 D 2 5 D S 2 9 C 3 8- 1 4 3 7 2 7 5 - 2 32 C8 D 3 1 P F 2 9 0 1 2 — 14 0 C8 D 4 0 P F 2 9 0 4 3 8- 1 4 3 7 2 6 0 - 6 14 0 C8 D 2 5 D S 2 9 D 1 8- 1 4 3 7 2 7 5 - 3 31 C8 D 3 1 P F 2 9 0 1 3 6- 1 4 3 7 2 6 0 - 5 14 0 C8 D 4 0 P F 2 9 1 3 2 — 14 0 C8 D 2 5 D S 2 9 D 2 — 31 C8 D 3 1 P F 2 9 0 2 2 — 13 8 C8 D 4 0 P F 2 9 1 3 3 — 14 0 C8 D 2 5 D S 2 9 D 3 8- 1 4 3 7 2 7 5 - 4 32 C8 D 3 1 P F 2 9 0 2 3 6- 1 4 3 7 2 6 0 - 6 13 8 C8 D 4 0 P F 2 9 1 4 2 — 13 8 C8 D 2 5 D S 2 9 E 1 — 31 C8 D 3 1 P F 2 9 0 3 2 — 13 8 C8 D 4 0 P F 2 9 1 4 3 — 13 8 C8 D 2 5 D S 2 9 E 2 — 31 C8 D 3 1 P F 2 9 0 3 3 — 13 8 C8 D 4 3 D S 2 9 A 1 — 31 C8 D 2 5 D S 2 9 E 3 — 32 C8 D 3 1 P F 2 9 0 4 2 — 14 0 C8 D 4 3 D S 2 9 A 2 — 31 C8 D 2 5 P F 2 9 0 1 2 — 14 0 C8 D 3 1 P F 2 9 0 4 3 6- 1 4 3 7 2 6 0 - 7 14 0 C8 D 4 3 D S 2 9 A 3 — 32 C8 D 2 5 P F 2 9 0 1 3 4- 1 4 3 7 2 6 0 - 5 14 0 C8 D 3 1 P F 2 9 1 3 2 6- 1 4 3 7 2 6 0 - 8 14 0 C8 D 4 3 D S 2 9 B 1 — 31 C8 D 2 5 P F 2 9 0 2 2 — 13 8 C8 D 3 1 P F 2 9 1 3 3 6- 1 4 3 7 2 6 0 - 9 14 0 C8 D 4 3 D S 2 9 B 2 — 31 C8 D 2 5 P F 2 9 0 2 3 4- 1 4 3 7 2 6 0 - 8 13 8 C8 D 3 1 P F 2 9 1 4 2 — 13 8 C8 D 4 3 D S 2 9 B 3 — 32 C8 D 2 5 P F 2 9 0 3 2 — 13 8 C8 D 3 1 P F 2 9 1 4 3 — 13 8 C8 D 4 3 D S 2 9 C 1 3- 1 4 3 7 2 7 6 - 2 31 C8 D 2 5 P F 2 9 0 3 3 4- 1 4 3 7 2 6 0 - 9 13 8 C8 D 3 5 D S 2 9 A 1 1- 1 4 3 7 2 7 6 - 0 31 C8 D 4 3 D S 2 9 C 2 — 31 C8 D 2 5 P F 2 9 0 4 2 — 14 0 C8 D 3 5 D S 2 9 A 2 — 31 C8 D 4 3 D S 2 9 C 3 3- 1 4 3 7 2 7 6 - 3 32 C8 D 2 5 P F 2 9 0 4 3 — 14 0 C8 D 3 5 D S 2 9 A 3 1- 1 4 3 7 2 7 6 - 1 32 C8 D 4 3 D S 2 9 D 1 — 31 C8 D 2 5 P F 2 9 1 3 2 — 14 0 C8 D 3 5 D S 2 9 B 1 — 31 C8 D 4 3 D S 2 9 D 2 — 31 C8 D 2 5 P F 2 9 1 3 3 — 14 0 C8 D 3 5 D S 2 9 B 2 — 31 C8 D 4 3 D S 2 9 D 3 3- 1 4 3 7 2 7 6 - 4 32 C8 D 2 5 P F 2 9 1 4 2 — 13 8 C8 D 3 5 D S 2 9 B 3 — 32 C8 D 4 3 D S 2 9 E 1 3- 1 4 3 7 2 7 6 - 5 31 C8 D 2 5 P F 2 9 1 4 3 — 13 8 C8 D 3 5 D S 2 9 C 1 — 31 C8 D 4 3 D S 2 9 E 2 — 31 C8 D 2 8 D S 2 9 A 1 — 31 C8 D 3 5 D S 2 9 C 2 — 31 C8 D 4 3 D S 2 9 E 3 — 32 C8 D 2 8 D S 2 9 A 2 — 31 C8 D 3 5 D S 2 9 C 3 1- 1 4 3 7 2 7 6 - 3 32 C8 D 4 3 P F 2 9 0 1 2 8- 1 4 3 7 2 6 0 - 9 14 0 C8 D 2 8 D S 2 9 A 3 — 32 C8 D 3 5 D S 2 9 D 1 — 31 C8 D 4 3 P F 2 9 0 1 3 9- 1 4 3 7 2 6 0 - 0 14 0 C8 D 2 8 D S 2 9 B 1 — 31 C8 D 3 5 D S 2 9 D 2 — 31 C8 D 4 3 P F 2 9 0 2 2 9- 1 4 3 7 2 6 0 - 2 13 8 C8 D 2 8 D S 2 9 B 2 — 31 C8 D 3 5 D S 2 9 D 3 — 32 C8 D 4 3 P F 2 9 0 2 3 9- 1 4 3 7 2 6 0 - 3 13 8 C8 D 2 8 D S 2 9 B 3 — 32 C8 D 3 5 D S 2 9 E 1 — 31 C8 D 4 3 P F 2 9 0 3 2 — 13 8 C8 D 2 8 D S 2 9 C 1 8- 1 4 3 7 2 7 5 - 5 31 C8 D 3 5 D S 2 9 E 2 — 31 C8 D 4 3 P F 2 9 0 3 3 — 13 8 C8 D 2 8 D S 2 9 C 2 — 31 C8 D 3 5 D S 2 9 E 3 1- 1 4 3 7 2 7 6 - 4 32 C8 D 4 3 P F 2 9 0 4 2 — 14 0 C8 D 2 8 D S 2 9 C 3 8- 1 4 3 7 2 7 5 - 8 32 C8 D 3 5 P F 2 9 0 1 2 — 14 0 C8 D 4 3 P F 2 9 0 4 3 — 14 0 C8 D 2 8 D S 2 9 D 1 8- 1 4 3 7 2 7 5 - 9 31 C8 D 3 5 P F 2 9 0 1 3 — 14 0 C8 D 4 3 P F 2 9 1 3 2 — 14 0 C8 D 2 8 D S 2 9 D 2 — 31 C8 D 3 5 P F 2 9 0 2 2 — 13 8 C8 D 4 3 P F 2 9 1 3 3 — 14 0 C8 D 2 8 D S 2 9 D 3 9- 1 4 3 7 2 7 5 - 0 32 C8 D 3 5 P F 2 9 0 2 3 7- 1 4 3 7 2 6 0 - 3 13 8 C8 D 4 3 P F 2 9 1 4 2 — 13 8 C8 D 2 8 D S 2 9 E 1 — 31 C8 D 3 5 P F 2 9 0 3 2 — 13 8 C8 D 4 3 P F 2 9 1 4 3 — 13 8 C8 D 2 8 D S 2 9 E 2 — 31 C8 D 3 5 P F 2 9 0 3 3 — 13 8 C8 D 5 0 D S 2 9 A 1 3- 1 4 3 7 2 7 6 - 8 31 C8 D 2 8 D S 2 9 E 3 — 32 C8 D 3 5 P F 2 9 0 4 2 — 14 0 C8 D 5 0 D S 2 9 A 2 — 32 C8 D 2 8 P F 2 9 0 1 2 9- 1 4 3 7 2 7 5 - 1 14 0 C8 D 3 5 P F 2 9 0 4 3 — 14 0 C8 D 5 0 D S 2 9 A 3 3- 1 4 3 7 2 7 6 - 9 32 C8 D 2 8 P F 2 9 0 1 3 — 14 0 C8 D 3 5 P F 2 9 1 3 2 — 14 0 C8 D 5 0 D S 2 9 B 1 — 31 C8 D 2 8 P F 2 9 0 2 2 — 13 8 C8 D 3 5 P F 2 9 1 3 3 — 14 0 C8 D 5 0 D S 2 9 B 2 — 32 C8 D 2 8 P F 2 9 0 2 3 5- 1 4 3 7 2 6 0 - 5 13 8 C8 D 3 5 P F 2 9 1 4 2 — 13 8 C8 D 5 0 D S 2 9 B 3 — 32 C8 D 2 8 P F 2 9 0 3 2 — 13 8 C8 D 3 5 P F 2 9 1 4 3 — 13 8 C8 D 5 0 D S 2 9 C 1 4- 1 4 3 7 2 7 6 - 0 31 C8 D 2 8 P F 2 9 0 3 3 — 13 8 C8 D 3 6 D S 2 9 A 1 — 31 C8 D 5 0 D S 2 9 C 2 — 32 C8 D 2 8 P F 2 9 0 4 2 — 14 0 C8 D 3 6 D S 2 9 A 2 — 31 C8 D 5 0 D S 2 9 C 3 4- 1 4 3 7 2 7 6 - 2 32 C8 D 2 8 P F 2 9 0 4 3 — 14 0 C8 D 3 6 D S 2 9 A 3 1- 1 4 3 7 2 7 6 - 5 32 C8 D 5 0 D S 2 9 D 1 4- 1 4 3 7 2 7 6 - 3 31 C8 D 2 8 P F 2 9 1 3 2 — 14 0 C8 D 3 6 D S 2 9 B 1 — 31 C8 D 5 0 D S 2 9 D 2 — 32 C8 D 2 8 P F 2 9 1 3 3 — 14 0 C8 D 3 6 D S 2 9 B 2 — 31 C8 D 5 0 D S 2 9 D 3 — 32 C8 D 2 8 P F 2 9 1 4 2 — 13 8 C8 D 3 6 D S 2 9 B 3 — 32 C8 D 5 0 D S 2 9 E 1 — 31 C8 D 2 8 P F 2 9 1 4 3 — 13 8 C8 D 3 6 D S 2 9 C 1 1- 1 4 3 7 2 7 6 - 6 31 C8 D 5 0 D S 2 9 E 2 — 32 C8 D 3 0 D S 2 9 A 1 — 31 C8 D 3 6 D S 2 9 C 2 1- 1 4 3 7 2 7 6 - 8 31 C8 D 5 0 D S 2 9 E 3 — 32 C8 D 3 0 D S 2 9 A 2 — 31 C8 D 3 6 D S 2 9 C 3 1- 1 4 3 7 2 7 6 - 9 32 C8 D 5 0 P F 2 9 0 1 2 — 14 0 C8 D 3 0 D S 2 9 A 3 — 32 C8 D 3 6 D S 2 9 D 1 2- 1 4 3 7 2 7 6 - 0 31 C8 D 5 0 P F 2 9 0 1 3 9- 1 4 3 7 2 6 0 - 9 14 0 C8 D 3 0 D S 2 9 B 1 — 31 C8 D 3 6 D S 2 9 D 2 2- 1 4 3 7 2 7 6 - 1 31 C8 D 5 0 P F 2 9 0 2 2 — 13 8 C8 D 3 0 D S 2 9 B 2 — 31 C8 D 3 6 D S 2 9 D 3 2- 1 4 3 7 2 7 6 - 2 32 C8 D 5 0 P F 2 9 0 2 3 0- 1 4 3 7 2 6 1 - 2 13 8 C8 D 3 0 D S 2 9 B 3 — 32 C8 D 3 6 D S 2 9 E 1 — 31 C8 D 5 0 P F 2 9 0 3 2 — 13 8 C8 D 3 0 D S 2 9 C 1 9- 1 4 3 7 2 7 5 - 3 31 C8 D 3 6 D S 2 9 E 2 — 31 C8 D 5 0 P F 2 9 0 3 3 0- 1 4 3 7 2 6 1 - 5 13 8 C8 D 3 0 D S 2 9 C 2 — 31 C8 D 3 6 D S 2 9 E 3 2- 1 4 3 7 2 7 6 - 3 32 C8 D 5 0 P F 2 9 0 4 2 — 14 0 C8 D 3 0 D S 2 9 C 3 9- 1 4 3 7 2 7 5 - 5 32 C8 D 3 6 P F 2 9 0 1 2 — 14 0 C8 D 5 0 P F 2 9 0 4 3 0- 1 4 3 7 2 6 1 - 6 14 0 C8 D 3 0 D S 2 9 D 1 9- 1 4 3 7 2 7 5 - 6 31 C8 D 3 6 P F 2 9 0 1 3 7- 1 4 3 7 2 6 0 - 7 14 0 C8 D 5 0 P F 2 9 1 3 2 — 14 0 C8 D 3 0 D S 2 9 D 2 — 31 C8 D 3 6 P F 2 9 0 2 2 7- 1 4 3 7 2 6 0 - 9 13 8 C8 D 5 0 P F 2 9 1 3 3 — 14 0 C8 D 3 0 D S 2 9 D 3 9- 1 4 3 7 2 7 5 - 7 32 C8 D 3 6 P F 2 9 0 2 3 8- 1 4 3 7 2 6 0 - 0 13 8 C8 D 5 0 P F 2 9 1 4 2 — 13 8 C8 D 3 0 D S 2 9 E 1 9- 1 4 3 7 2 7 5 - 8 31 C8 D 3 6 P F 2 9 0 3 2 — 13 8 C8 D 5 0 P F 2 9 1 4 3 — 13 8 C8 D 3 0 D S 2 9 E 2 — 31 C8 D 3 6 P F 2 9 0 3 3 8- 1 4 3 7 2 6 0 - 1 13 8 C8 D 5 2 D S 2 9 C 1 M 1 9 1 4- 1 4 3 7 2 7 6 - 6 29 C8 D 3 0 D S 2 9 E 3 9- 1 4 3 7 2 7 5 - 9 32 C8 D 3 6 P F 2 9 0 4 2 — 14 0 C8 D 5 2 D S 2 9 C 1 M 1 9 5 4- 1 4 3 7 2 7 6 - 7 29 C8 D 3 0 P F 2 9 0 1 2 — 14 0 C8 D 3 6 P F 2 9 0 4 3 8- 1 4 3 7 2 6 0 - 2 14 0 C8 D 6 0 D S 2 9 A 1 5- 1 4 3 7 2 7 6 - 1 31 C8 D 3 0 P F 2 9 0 1 3 5- 1 4 3 7 2 6 0 - 6 14 0 C8 D 3 6 P F 2 9 1 3 2 — 14 0 C8 D 6 0 D S 2 9 A 2 — 32 C8 D 3 0 P F 2 9 0 2 2 — 13 8 C8 D 3 6 P F 2 9 1 3 3 — 14 0 C8 D 6 0 D S 2 9 A 3 5- 1 4 3 7 2 7 6 - 2 32 C8 D 3 0 P F 2 9 0 2 3 5- 1 4 3 7 2 6 0 - 8 13 8 C8 D 3 6 P F 2 9 1 4 2 — 13 8 C8 D 6 0 D S 2 9 B 1 — 31 C8 D 3 0 P F 2 9 0 3 2 — 13 8 C8 D 3 6 P F 2 9 1 4 3 — 13 8 C8 D 6 0 D S 2 9 B 2 — 32 C8 D 3 0 P F 2 9 0 3 3 — 13 8 C8 D 4 0 D S 2 9 A 1 2- 1 4 3 7 2 7 6 - 5 31 C8 D 6 0 D S 2 9 B 3 5- 1 4 3 7 2 7 6 - 3 32 C8 D 3 0 P F 2 9 0 4 2 — 14 0 C8 D 4 0 D S 2 9 A 2 — 31 C8 D 6 0 D S 2 9 C 1 5- 1 4 3 7 2 7 6 - 4 31 C8 D 3 0 P F 2 9 0 4 3 6- 1 4 3 7 2 6 0 - 1 14 0 C8 D 4 0 D S 2 9 A 3 2- 1 4 3 7 2 7 6 - 6 32 C8 D 6 0 D S 2 9 C 2 — 32 C8 D 3 0 P F 2 9 1 3 2 — 14 0 C8 D 4 0 D S 2 9 B 1 — 31 C8 D 6 0 D S 2 9 C 3 — 32 C8 D 3 0 P F 2 9 1 3 3 6- 1 4 3 7 2 6 0 - 4 14 0 C8 D 4 0 D S 2 9 B 2 — 31 C8 D 6 0 D S 2 9 D 1 5- 1 4 3 7 2 7 6 - 7 31 C8 D 3 0 P F 2 9 1 4 2 — 13 8 C8 D 4 0 D S 2 9 B 3 — 32 C8 D 6 0 D S 2 9 D 2 — 32 C8 D 3 0 P F 2 9 1 4 3 — 13 8 C8 D 4 0 D S 2 9 C 1 2- 1 4 3 7 2 7 6 - 7 31 C8 D 6 0 D S 2 9 D 3 — 32 C8 D 3 1 D S 2 9 A 1 — 31 C8 D 4 0 D S 2 9 C 2 — 31 C8 D 6 0 D S 2 9 E 1 — 31 C8 D 3 1 D S 2 9 A 2 — 31 C8 D 4 0 D S 2 9 C 3 2- 1 4 3 7 2 7 6 - 9 32 C8 D 6 0 D S 2 9 E 2 — 32 C8 D 3 1 D S 2 9 A 3 0- 1 4 3 7 2 7 6 - 2 32 C8 D 4 0 D S 2 9 D 1 3- 1 4 3 7 2 7 6 - 0 31 C8 D 6 0 D S 2 9 E 3 — 32 C8 D 3 1 D S 2 9 B 1 — 31 C8 D 4 0 D S 2 9 D 2 — 31 C8 D 6 0 P F 2 9 0 1 2 — 14 0 C8 D 3 1 D S 2 9 B 2 — 31 C8 D 4 0 D S 2 9 D 3 3- 1 4 3 7 2 7 6 - 1 32 C8 D 6 0 P F 2 9 0 1 3 5- 1 4 3 7 2 7 6 - 8 14 0 C8 D 3 1 D S 2 9 B 3 — 32 C8 D 4 0 D S 2 9 E 1 — 31 C8 D 6 0 P F 2 9 0 2 2 — 13 8 C8 D 3 1 D S 2 9 C 1 0- 1 4 3 7 2 7 6 - 3 31 C8 D 4 0 D S 2 9 E 2 — 31 C8 D 6 0 P F 2 9 0 2 3 1- 1 4 3 7 2 6 1 - 1 13 8 C8 D 3 1 D S 2 9 C 2 0- 1 4 3 7 2 7 6 - 5 31 C8 D 4 0 D S 2 9 E 3 — 32 C8 D 6 0 P F 2 9 0 3 2 — 13 8 C8 D 3 1 D S 2 9 C 3 0- 1 4 3 7 2 7 6 - 6 32 C8 D 4 0 P F 2 9 0 1 2 — 14 0 C8 D 6 0 P F 2 9 0 3 3 — 13 8 C8 D 3 1 D S 2 9 D 1 0- 1 4 3 7 2 7 6 - 8 31 C8 D 4 0 P F 2 9 0 1 3 — 14 0 C8 D 6 0 P F 2 9 0 4 2 — 14 0 C8 D 3 1 D S 2 9 D 2 — 31 C8 D 4 0 P F 2 9 0 2 2 — 13 8 C8 D 6 0 P F 2 9 0 4 3 — 14 0 C8 D 3 1 D S 2 9 D 3 0- 1 4 3 7 2 7 6 - 9 32 C8 D 4 0 P F 2 9 0 2 3 8- 1 4 3 7 2 6 0 - 4 13 8 C8 D 6 0 P F 2 9 1 3 2 — 14 0 C8 D 3 1 D S 2 9 E 1 — 31 C8 D 4 0 P F 2 9 0 3 2 — 13 8 C8 D 6 0 P F 2 9 1 3 3 — 14 0 C8 D 3 1 D S 2 9 E 2 — 31 C8 D 4 0 P F 2 9 0 3 3 — 13 8 C8 D 6 0 P F 2 9 1 4 2 — 13 8 200 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired Ty c o Acquired Ty c o Part Part Pa g e Part Part Pa g e Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r Nu m b e r C8 D 6 0 P F 2 9 1 4 3 — 13 8 W8 D 4 0 P F 2 9 0 1 2 — 13 4 C9 D 0 2 0 P F 6 0 0 4 8 3- 1 4 3 7 2 6 4 - 4 12 9 W8 D 4 0 P F 2 9 0 1 3 3- 1 4 3 7 2 6 5 - 0 13 4 C9 D 0 3 0 P F 6 0 0 4 8 3- 1 4 3 7 2 6 4 - 5 12 9 W8 D 4 0 P F 2 9 0 4 2 — 13 4 C9 D 0 4 0 P F 6 0 0 4 8 — 12 9 W8 D 4 0 P F 2 9 0 4 3 — 13 4 C9 D 0 5 0 P F 6 0 0 4 8 — 12 9 W8 D 4 0 P F 2 9 0 6 2 — 13 6 C9 D 0 6 0 P F 6 0 0 4 8 3- 1 4 3 7 2 6 4 - 6 12 9 W8 D 4 0 P F 2 9 0 6 3 — 13 6 W8 D 1 8 D S 2 9 0 6 3 — 34 W8 D 4 0 P F 2 9 0 9 2 — 13 6 W8 D 1 8 D S 2 9 0 9 3 — 34 W8 D 4 0 P F 2 9 0 9 3 — 13 6 W8 D 1 8 P F 2 9 0 1 2 — 13 4 W8 D 4 3 D S 2 9 0 6 3 — 34 W8 D 1 8 P F 2 9 0 1 3 — 13 4 W8 D 4 3 D S 2 9 0 9 3 — 34 W8 D 1 8 P F 2 9 0 4 2 — 13 4 W8 D 4 3 P F 2 9 0 1 2 — 13 4 W8 D 1 8 P F 2 9 0 4 3 — 13 4 W8 D 4 3 P F 2 9 0 1 3 — 13 4 W8 D 1 8 P F 2 9 0 6 2 — 13 6 W8 D 4 3 P F 2 9 0 4 2 — 13 4 W8 D 1 8 P F 2 9 0 6 3 1- 1 4 3 7 2 6 5 - 0 13 6 W8 D 4 3 P F 2 9 0 4 3 — 13 4 W8 D 1 8 P F 2 9 0 9 2 — 13 6 W8 D 4 3 P F 2 9 0 6 2 — 13 6 W8 D 1 8 P F 2 9 0 9 3 — 13 6 W8 D 4 3 P F 2 9 0 6 3 — 13 6 W8 D 2 0 D S 2 9 0 6 3 — 34 W8 D 4 3 P F 2 9 0 9 2 — 13 6 W8 D 2 0 D S 2 9 0 9 3 — 34 W8 D 4 3 P F 2 9 0 9 3 — 13 6 W8 D 2 0 P F 2 9 0 1 2 — 13 4 W8 D 4 5 D S 2 9 0 6 3 — 34 W8 D 2 0 P F 2 9 0 1 3 — 13 4 W8 D 4 5 D S 2 9 0 9 3 — 34 W8 D 2 0 P F 2 9 0 4 2 — 13 4 W8 D 4 5 P F 2 9 0 1 2 — 13 4 W8 D 2 0 P F 2 9 0 4 3 — 13 4 W8 D 4 5 P F 2 9 0 1 3 — 13 4 W8 D 2 0 P F 2 9 0 6 2 — 13 6 W8 D 4 5 P F 2 9 0 4 2 — 13 4 W8 D 2 0 P F 2 9 0 6 3 — 13 6 W8 D 4 5 P F 2 9 0 4 3 — 13 4 W8 D 2 0 P F 2 9 0 9 2 — 13 6 W8 D 4 5 P F 2 9 0 6 2 — 13 6 W8 D 2 0 P F 2 9 0 9 3 — 13 6 W8 D 4 5 P F 2 9 0 6 3 — 13 6 W8 D 2 2 D S 2 9 0 6 3 — 34 W8 D 4 5 P F 2 9 0 9 2 — 13 6 W8 D 2 2 D S 2 9 0 9 3 — 34 W8 D 4 5 P F 2 9 0 9 3 — 13 6 W8 D 2 2 P F 2 9 0 1 2 — 13 4 W8 D 5 0 D S 2 9 0 6 3 — 34 W8 D 2 2 P F 2 9 0 1 3 — 13 4 W8 D 5 0 D S 2 9 0 9 3 — 34 W8 D 2 2 P F 2 9 0 4 2 — 13 4 W8 D 5 0 P F 2 9 0 1 2 3- 1 4 3 7 2 6 5 - 4 13 4 W8 D 2 2 P F 2 9 0 4 3 1- 1 4 3 7 2 6 5 - 2 13 4 W8 D 5 0 P F 2 9 0 1 3 3- 1 4 3 7 2 6 5 - 5 13 4 W8 D 2 2 P F 2 9 0 6 2 — 13 6 W8 D 5 0 P F 2 9 0 4 2 — 13 4 W8 D 2 2 P F 2 9 0 6 3 — 13 6 W8 D 5 0 P F 2 9 0 4 3 3- 1 4 3 7 2 6 5 - 6 13 4 W8 D 2 2 P F 2 9 0 9 2 — 13 6 W8 D 5 0 P F 2 9 0 6 2 3- 1 4 3 7 2 6 5 - 7 13 6 W8 D 2 2 P F 2 9 0 9 3 — 13 6 W8 D 5 0 P F 2 9 0 6 3 — 13 6 W8 D 2 5 D S 2 9 0 6 3 — 34 W8 D 5 0 P F 2 9 0 9 2 — 13 6 W8 D 2 5 D S 2 9 0 9 3 — 34 W8 D 5 0 P F 2 9 0 9 3 — 13 6 W8 D 2 5 P F 2 9 0 1 2 — 13 4 W8 D 6 0 D S 2 9 0 6 3 — 34 W8 D 2 5 P F 2 9 0 1 3 1- 1 4 3 7 2 6 5 - 3 13 4 W8 D 6 0 D S 2 9 0 9 3 — 34 W8 D 2 5 P F 2 9 0 4 2 — 13 4 W8 D 6 0 P F 2 9 0 1 2 — 13 4 W8 D 2 5 P F 2 9 0 4 3 — 13 4 W8 D 6 0 P F 2 9 0 1 3 3- 1 4 3 7 2 6 5 - 9 13 4 W8 D 2 5 P F 2 9 0 6 2 — 13 6 W8 D 6 0 P F 2 9 0 4 2 — 13 4 W8 D 2 5 P F 2 9 0 6 3 1- 1 4 3 7 2 6 5 - 4 13 6 W8 D 6 0 P F 2 9 0 4 3 — 13 4 W8 D 2 5 P F 2 9 0 9 2 — 13 6 W8 D 6 0 P F 2 9 0 6 2 — 13 6 W8 D 2 5 P F 2 9 0 9 3 1- 1 4 3 7 2 6 5 - 5 13 6 W8 D 6 0 P F 2 9 0 6 3 — 13 6 W8 D 2 8 D S 2 9 0 6 3 — 34 W8 D 6 0 P F 2 9 0 9 2 — 13 6 W8 D 2 8 D S 2 9 0 9 3 — 34 W8 D 6 0 P F 2 9 0 9 3 — 13 6 W8 D 2 8 P F 2 9 0 1 2 — 13 4 W8 D 2 8 P F 2 9 0 1 3 1- 1 4 3 7 2 6 5 - 6 13 4 W8 D 2 8 P F 2 9 0 4 2 — 13 4 W8 D 2 8 P F 2 9 0 4 3 — 13 4 W8 D 2 8 P F 2 9 0 6 2 — 13 6 W8 D 2 8 P F 2 9 0 6 3 — 13 6 W8 D 2 8 P F 2 9 0 9 2 — 13 6 W8 D 2 8 P F 2 9 0 9 3 1- 1 4 3 7 2 6 5 - 7 13 6 W8 D 3 0 D S 2 9 0 6 3 — 34 W8 D 3 0 D S 2 9 0 9 3 — 34 W8 D 3 0 P F 2 9 0 1 2 — 13 4 W8 D 3 0 P F 2 9 0 1 3 2- 1 4 3 7 2 6 5 - 0 13 4 W8 D 3 0 P F 2 9 0 4 2 — 13 4 W8 D 3 0 P F 2 9 0 4 3 2- 1 4 3 7 2 6 5 - 1 13 4 W8 D 3 0 P F 2 9 0 6 2 — 13 6 W8 D 3 0 P F 2 9 0 6 3 — 13 6 W8 D 3 0 P F 2 9 0 9 2 — 13 6 W8 D 3 0 P F 2 9 0 9 3 — 13 6 W8 D 3 5 D S 2 9 0 6 3 — 34 W8 D 3 5 D S 2 9 0 9 3 — 34 W8 D 3 5 P F 2 9 0 1 2 — 13 4 W8 D 3 5 P F 2 9 0 1 3 2- 1 4 3 7 2 6 5 - 3 13 4 W8 D 3 5 P F 2 9 0 4 2 — 13 4 W8 D 3 5 P F 2 9 0 4 3 — 13 4 W8 D 3 5 P F 2 9 0 6 2 — 13 6 W8 D 3 5 P F 2 9 0 6 3 2- 1 4 3 7 2 6 5 - 5 13 6 W8 D 3 5 P F 2 9 0 9 2 — 13 6 W8 D 3 5 P F 2 9 0 9 3 — 13 6 W8 D 3 6 D S 2 9 0 6 3 — 34 W8 D 3 6 D S 2 9 0 9 3 — 34 W8 D 3 6 P F 2 9 0 1 2 — 13 4 W8 D 3 6 P F 2 9 0 1 3 2- 1 4 3 7 2 6 5 - 6 13 4 W8 D 3 6 P F 2 9 0 4 2 — 13 4 W8 D 3 6 P F 2 9 0 4 3 2- 1 4 3 7 2 6 5 - 7 13 4 W8 D 3 6 P F 2 9 0 6 2 — 13 6 W8 D 3 6 P F 2 9 0 6 3 — 13 6 W8 D 3 6 P F 2 9 0 9 2 — 13 6 W8 D 3 6 P F 2 9 0 9 3 2- 1 4 3 7 2 6 5 - 8 13 6 W8 D 4 0 D S 2 9 0 6 3 — 34 W8 D 4 0 D S 2 9 0 9 3 — 34 201 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Card Edge Connectors Related Product Information For additional component solutions for Industrial Machinery, Instrumentation, Security, and related appli- cations, request the follow- ing brochures: Brochure No. 889439 – Industrial Machinery Brochure No. 1307285 – Instrumentation Brochure No. 1308325 – Security These brochures list cata- log sources for connectors, switches, terminal blocks, relays, timers, circuit break- ers, and cable assemblies available from Tyco Electronics. 202 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK:44-141-810-8967

Global Contacts Americas Argentina– Buenos Aires Canada– Markham Mexico– Mexico City For Latin/South American Phone: +54-11-4733-2200 Phone: +905-475-6222 Phone: +52-55-5-729-0425 Countries not shown Fax: +54-11-4733-2250 Fax: +905-474-5520 Fax: +52-55-5-398-1430 Phone: +57-1-240-9396 Product Information Center: Fax: +57-1-660-0206 Brasil– São Paulo (Technical Support) United States– Harrisburg, PA Phone: +55-11-3611-1311 Phone: +905-470-4425 Phone: +717-564-0100 Fax: +55-11-3611-0397 Fax: +905-474-5525 Fax: +717-986-7575 Product Information Center: Colombia– Bogota (Technical Support) Phone: +57-1-240-9396 Phone: +800-522-6752 Fax: +57-1-660-0206 Fax: +717-986-7575 Asia/Pacific Australia– Sydney Japan– Kawasaki, Kanagawa New Zealand– Auckland Singapore– Singapore Phone: +61-2-9840-8200 Phone: +81-44-844-8079 Phone: +64-9-634-4580 Phone: +65-482-0311 Fax: +61-2-9899-5649 Fax: +81-44-844-8733 Fax: +64-9-634-4586 Fax: +65-482-1012 Product Information Center: Product Information Center: Raychem Products (Technical Support) (Technical Support) Philippines– Makati City Phone: +65-486-6151 Phone: +61-2-9554-2600 Phone: +81-44-844-8013 Phone: +632-867-8641 Fax: +65-654-5514 Fax: +61-2-9502-2556 Fax: +81-44-812-3200 Fax: +632-867-8661 Raychem Products Taiwan– Taipei India– Bangalore Phone: +81-44-900-5102 People’s Republic of China Phone: +886-2-2664-9977 Phone: +91-80-841-0200 Fax: +81-44-5025-5027 Hong Kong Fax: +886-2-2664-9900 Fax: +91-80-841-0210 Phone: +852-2735-1628 Korea– Seoul Fax: +852-2735-0243 Thailand– Bangkok Indonesia– Jakarta Phone: +82-2-3274-0535 Phone: +66-2-955-0500 Phone: +6221-526-7852 Fax: +82-2-3274-0524/0531 Shanghai Fax: +66-2-955-0505 Fax: +6221-526-7856 Phone: +86-21-6485-0602 Malaysia– Selangor Fax: +86-21-6485-0728 Vietnam– Ho Chi Minh City Phone: +60-3-7053055 Phone: +84-8-8232-546/7 Fax: +60-3-7053066 Shunde Fax: +84-8-8221-443 Phone: +86-765-775-1368 Fax: +86-765-775-2823 Europe/Middle East/Africa Austria– Vienna Germany– Bensheim Italy– Collegno (Torino) Spain– Barcelona Phone: +43-190-560-0 Phone: +49-6251-133-0 Phone: +39-011-4012-111 Phone: +34-93-291-0330 Fax: +43-190-560-1333 Fax: +49-6251-133-1600 Fax: +39-011-4031-116 Fax: +34-93-201-7879 Product Information Center: Product Information Center: Belgium– Kessel-Lo (Technical Support) Lithuania– Vilnius (Technical Support): Phone: +32-16-352-300 Phone: +49-6251-133-1999 Phone: +370-5-21-31-402 Phone: +34-93-291-0330 Fax: +32-16-352-352 Fax: +49-6251-133-1988 Fax: +370-5-21-31-403 Fax: +34-93-200-3779 Netherlands– ’s-Hertogenbosch Bulgaria– Sofia Germany– Langen Phone: +31-73-6246-246 Sweden– Upplands Väsby Phone: +359-2-971-2152 Phone: +49-6103-709-0 Fax: +31-73-6212-365 Phone: +46-8-50-72-50-00 Fax: +359-2-971-2153 Fax: +49-6103-709-1223 Product Information Center: Fax: +46-8-50-72-50-01 (Technical Support) Czech Republic– Kurim Germany– Speyer Phone: +31-73-6246-999 Switzerland– Steinach Phone: +420-5-41-162-111 Phone: +49-6232-30-0 Fax: +31-73-6246-998 Phone: +41-71-447-0447 Fax: +420-5-41-162-223 Fax: +49-6232-30-2243 Fax: +41-71-447-0444 Norway– Nesbru DPheonnme:ark–+ 4V5ib-y7 0J- 15-52-00 GHTerSm Dainvyis ion– Neunkirchen PFahxo:ne: ++4477--6666--7777--8888--9595 TPuhorkneey:– Is+ta9n0b-2u1l 2-281-8181…3 Fax: +45-86-29-51-33 PFahxo:ne: ++4499--22224477--330055--01 22 Poland– Warsaw Fax: ++9900--221122--228821--58113804/5430 Phone: +48-22-5490-888 Egypt– Cairo Fax: +48-22-5490-880 Phone: +20-2-417-76-47 Great Britain– Ukraine– Kiev Fax: +20-2-419-23-34 Stanmore Middlesex Romania– Bucharest Phone: +38-044-238-6908 Phone: +44-181-954-2356 Phone: +40-1-311-3479+3596 Fax: +38-044-568-5740 Fax: +44-181-954-6234 Fax: +40-1-312-0574 Estonia– Tallinn Product Information Center: Phone: +372-65-05-474 (Technical Support) Russia– Moscow Fax: +372-65-05-470 Freephone GB: 0800-267-666 Phone: +7-095-926-55-06…09 Phone: +44-141 810 8967…69 Fax: +7-095-926-55-05 Finland– Helsinki Fax: +44-141 810 8971 Phone: +358-95-12-34-20 Great Britain– Dorcan, Swindon Russia– St. Petersburg Fax: +358-95-12-34-250 Raychem Products Phone: +7-812-325-30-83 Phone: +44-1793-528171 Fax: +7-812-325-32-88 France– Fax: +44-1793-572516 Cergy-Pontoise Scotland– Dundee Phone: +33-1-3420-8888 Greece– Athens Madison Cable Products Fax: +33-1-3420-8600 Phone: +30-1-9370-396/397 Phone: +44-1382-508080 Product Information Center: Fax: +30-1-9370-655 Fax: +44-1382-505060 (Technical Support) Phone: +33-1-3420-8943 Hungary– Budapest Slovakia– Banská Bystrica Fax: +33-1-3420-8623 Phone: +36-1-289-1000 Phone: +421-48-415-20-11/12 Fax: +36-1-289-1010 Fax: +421-48-415-20-13 France Tyco Electronics Export– Ireland– Dublin Slovenia– Ljubljana St Ouen L’Aumone Phone: +353-1-820-3000 Phone: +386-1561-3270 Phone: +33-1-3440-7200 Fax: +353-1-820-9790 Fax: +386-1561-3240 Fax: +33-1-3440-7220 or +33-1-3440-7230 Israel– Yokneam Phone: +972-4-959-0508 South Africa– Port Elizabeth Fax: +972-4-959-0506 Phone: +27-41-405-4500 Fax: +27-41-486-1314 203 1654080–7.5M–SK–CAD–7-03–0G3B Tyco Electronics Corporation Printed in U.S.A. www.tycoelectronics.com

TYCO ELECTRONICS CORPORATION WWW.TYCOELECTRONICS.COM