3M™ Pin Strip Header Single and Dual Row .100”, .235”/.318” Mating Length, Straight & Right Angle, Solder Tails 929 Series • Stackable • Gold, Matte Sn, or Tin-Lead plating options • High Temperature (PCT) plastic for Wave or IR soldering • Solder stand-off for wave soldering • Board pin retention feature option • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modifi ed: November 6, 2008 TS-0769-E Sheet 1 of 4 Physical Insulation: Material: Glass Filled Polyester (PBT) or High Temperature (PCT) Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Underplating: 50 µ” [1.27 µm] Nickel Wiping Area and Solder Tails: See ordering information (Gold, Matte Tin, Tin-Lead options) Marking: None Electrical Current Rating: 2.5 A Insulation Resistance: > 5 × 109 Ω at 500 V DC Withstanding Voltage: 1500 V at Sea Level RMS Environmental Temperature Rating: -40°C to +105°C Process Rating: 260°C (per J-STD-020C) for PCT parts only (PBT insulator version), maximum insulator temperature 191°C (Solder Wave Process Only) Moisture Sensitivity Level: Level 1 (per J-STD-020C) for PCT parts UL File No.: E68080 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

3M™ Pin Strip Header Single and Dual Row .100”, .235”/.318” Mating Length, Straight & Right Angle, Solder Tails 929 Series C PCB Edge 0.100±0.003 2x .0[15.02 7M]ax "B" ±.015 0.075±.005 [2.54] [1.91] 0.040±0.003 0.115 [1.02] [2.92] AFTER PLATING 0.170 Min [4.32] RIGHT ANGLE "C" SOLDER WRAP .070±.010 TAILS [1.78] 0.100±.003 0.060 [2.54] "A"±.008 [1.52] 0.040±.003 [1.02] AFTER PLATING "B"±.015 0.100 0.100 [2.54] STRAIGHT SOLDER WRAP [2.54] TYP TAILS 0.025±0.001 SQ. TYP. [0.64] RECOMMENDED HOLE PATTERN [02..15040] "B" ±.015 0.100±.003 PCB EDGE 0.075±0.005 0.170 [2.54] .215 [1.91] 0.100 [5.46] [2.54] 0.070±0.005 0.100 "C" [1.78] [2.54] 0.040±.003 [1.02] AFTER PLATING 0.100 [2.54] 2x .050 Max. 0.060 [1.27] [1.52] 0.100±.003 0.040±.003 0.100 [2.54] [1.02] "A"±.008 [2.54] AFTER PLATING 0.100 [2.54] "B"±.015 STRAIGHT WIREWRAP TAILS 0.100 TYP. 0.025±0.001 SQ. TYP. [2.54] [0.640] 0.100 RECOMMENDED HOLE PATTERN Inch [mm] Tolerance Unless Noted .0 .00 .000 inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference only Notes: 1. Dimension C is a maximum when the pin strip is cut to length, not when the strip is broken to length. 2. Board pin retention feature available: change from ‘‘9X9’’ to ‘‘9R9’’ when ordering. TS-0769-E 3. Breaking of dual row parts is not recommended. Sheet 2 of 4 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

3M™ Pin Strip Header Single and Dual Row .100”, .235”/.318” Mating Length, Straight & Right Angle, Solder Tails 929 Series Single Row Tail Length Code Table 2 Table 1 Pin Quantity Dimension C Per Row (see note 1) Tail Dimensions Plating 3M Part Length 01 0.10 [2.5] Number Code A B 02 0.20 [5.1] 01 0.110 [2.79] 03 0.30 [7.6] 04 0.40 [10.2] 09 0.145 [3.68] 05 0.50 [12.7] 02 0.210 [5.33] 06 0.60 [15.2] 929647 Straight 03 0.235 [5.97] 0.410 [10.41] 07 0.70 [17.8] 04 0.510 [12.95] 08 0.80 [20.3] 09 0.90 [22.9] 05 0.610 [15.49] Gold 10 1.00 [25.4] 07 0.910 [23.11] 11 1.10 [27.9] 929648 01 0.235 [5.97] 0.110 [2.79] 12 1.20 [30.5] Right Angle 13 1.30 [33.0] 01 0.110 [2.79] 14 1.40 [35.6] 929705 11 0.125 [3.18] 15 1.50 [38.1] 0.318 [8.08] Straight 09 0.145 [3.68] 16 1.60 [40.6] 17 1.70 [43.2] 06 0.710 [18.03] 18 1.80 [45.7] 01 0.110 [2.79] 19 1.90 [48.3] 02 0.210 [5.33] 20 2.00 [50.8] 03 0.410 [10.41] 21 2.10 [53.3] 929834 Straight 0.235 [5.97] 22 2.20 [55.9] 04 0.510 [12.95] 23 2.30 [58.4] 05 0.610 [15.49] 24 2.40 [61.0] 07 0.910 [23.11] 25 2.50 [63.5] Tin 929835 26 2.60 [66.0] 01 0.235 [5.97] 0.110 [2.79] Right Angle 27 2.70 [68.6] 01 0.110 [2.79] 28 2.80 [71.1] 929700 29 2.90 [73.7] 11 0.318 [8.08] 0.125 [3.18] Straight 30 3.00 [76.2] 06 0.710 [18.03] 31 3.10 [78.7] 929730 01 0.318 [8.08] 0.110 [2.79] 32 3.20 [81.3] Right Angle 33 3.30 [83.8] 34 3.40 [86.4] 35 3.50 [88.9] 36 3.60 [91.4] Single Row Ordering Information Gold 9X9XXX-XX-XX-XX 2 = No Pin Retention Gold Plating Suffix R = Pin Retention Location & Thickness (see table 1) I = 10 μ” [0.25 μm] all over, PBT insulator 3M Part Number (select from Table 1 based on Dim A and plating) Pin Quantity Per Row (RIA E1 & C1 apply) (see table1) (see table 2) EU = 10 μ” [0.25 μm] all over, PCT insulator Tail Length Code (RIA E1 & C1 apply) (see table 1) Tin 9X9XXX-XX-XX-XX 2 = No Pin Retention R = Pin Retention Plating Suffix: blank = 100 μ” [2.54 μm] tin-lead, PBT 3M Part Number (select from Table 1 insulator (RIA E3 & C2 apply) based on Dim A and plating) Pin Quantity Per Row RK = 200 μ” [5 µm] matte tin, PCT (see table1) Tail Length Code (see table 1) (see table 2) insulator (RIA E1 & C1 apply) TS-0769-E Sheet 3 of 4 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

3M™ Pin Strip Header Single and Dual Row .100”, .235”/.318” Mating Length, Straight & Right Angle, Solder Tails 929 Series Dual Row Tail Length Code Table 4 Table 3 Pin Quantity Pin Quantity Dimension C Per Row Total Dual Row (see note 1) Dimensions 3M Part Tail Length Plating 01 02 0.10 [2.5] Number Code A B 02 04 0.20 [5.1] 01 0.110 [2.79] 03 06 0.30 [7.6] 09 0.145 [3.68] 04 08 0.40 [10.2] 02 0.210 [5.33] 05 10 0.50 [12.7] 929665 Straight 08 0.235 [5.97] 0.310 [7.87] 06 12 0.60 [15.2] 03 0.410 [10.41] 07 14 0.70 [17.8] 04 0.510 [12.95] 08 16 0.80 [20.3] 05 0.610 [15.49] 09 18 0.90 [22.9] 01 0.110 [2.79] 10 20 1.00 [25.4] Gold 11 0.125 [3.18] 11 22 1.10 [27.9] 929715 10 0.318 [8.08] 0.175 [4.45] Straight 12 24 1.20 [30.5] 03 0.410 [10.41] 13 26 1.30 [33.0] 06 0.710 [18.03] 14 28 1.40 [35.6] 01 0.110 [2.79] 929667 15 30 1.50 [38.1] 04 0.235 [5.97] 0.145 [3.68] Right Angle 16 32 1.60 [40.6] 02 0.405 [10.29] 17 34 1.70 [43.2] 929745 01 0.110 [2.79] 0.318 [8.08] 18 36 1.80 [45.7] Right 02 0.405 [10.29] 19 38 1.90 [48.3] 01 0.110 [2.79] 20 40 2.00 [50.8] 09 0.145 [3.68] 21 42 2.10 [53.3] 02 0.210 [5.33] 929836 22 44 2.20 [55.9] 08 0.235 [5.97] 0.310 [7.87] Straight 23 46 2.30 [58.4] 03 0.410 [10.41] 24 48 2.40 [61.0] 04 0.510 [12.95] 25 50 2.50 [63.5] 05 0.610 [15.49] 26 52 2.60 [66.0] 01 0.110 [2.79] Tin 27 54 2.70 [68.6] 11 0.125 [3.18] 28 56 2.80 [71.1] 929710 09 0.145 [3.68] Straight 10 0.318 [8.08] 0.175 [4.45] 29 58 2.90 [73.7] 03 0.410 [10.41] 30 60 3.00 [76.2] 06 0.710 [18.03] 31 62 3.10 [78.7] 32 64 3.20 [81.3] 01 0.110 [2.79] 929838 33 66 3.30 [83.8] Right Angle 04 0.235 [5.97] 0.145 [3.68] 34 68 3.40 [86.4] 02 0.405 [10.29] 35 70 3.50 [88.9] 36 72 3.60 [91.4] Dual Row Ordering Information Gold 9X9XXX-XX-XX-XX 2 = No Pin Retention Gold Plating Suffix R = Pin Retention Location & Thickness (see table 1) 3M Part Number (select from Table 3 I = 10 μ” [0.25 μm] all over, PBT insulator based on Dim A and plating) (RIA E1 & C1 apply) Pin Quantity Per Row (see table 3) Tail Length Code (see table 4) EU = 10 μ” [0.25 μm] all over, PCT insulator (see table 3) (RIA E1 & C1 apply) Tin 9X9XXX-XX-XX-XX 2 = No Pin Retention R = Pin Retention Plating Suffix: 3M Part Number (select from Table 3 blank = 100 μ” [2.54 μm] tin-lead, PBT based on Dim A and plating) insulator (RIA E3 & C2 apply) (see table 3) Pin Quantity Per Row RK = 200 μ” [5 μm] matte tin, PCT T(saeile L teanbgleth 3 C)ode (see table 4) insulator (RIA E1 & C1 apply) TS-0769-E Sheet 4 of 4 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-E

Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-E

Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. Please recycle. Printed in USA. 1-800-225-5373 © 3M 2008. All rights reserved. www.3m.com/interconnects RIA-2217A-E 3M is a trademark of 3M Company.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: 929647-01-04-I 929647-01-06-I 929647-01-07-I 929647-01-08-I 929647-01-12-I 929647-01-16-I 929647-01-20-I 929647-01-28-I 929647-02-03-I 929647-02-16-I 929647-03-02-I 929647-03-03-I 929647-03-06-I 929647-03-18-I 929647-09-01-I 929647-09-03-I 929647-09-04-I 929647-09-05-I 929647-09-07-I 929647-09-08-I 929647-09-12-I 929647-09-18-I 929647-09-24-I 929648-01-01-I 929648-01-07-I 929665-01-03-I 929665-01-04-I 929665-01-06-I 929665-01-08-I 929665-01-09-I 929665-01-11-I 929665-01-16-I 929665-01-20-I 929665-01-21-I 929665-01-22-I 929665-01-25-I 929665-01-26-I 929665-09-01-I 929665-09-02-I 929665-09-07-I 929665-09-08-I 929665-09-11-I 929665-09-13-I 929665-09-16-I 929665-09-26-I 929665-09-31-I 929667-01-01-I 929667-01-10-I 929667-04-12-I 929667-04-20-I 929705-01-01-I 929705-01-08-I 929705-01-33-I 929705-01-34-I 929705-11-03-I 929710-01-02 929710-01-03 929710-01-05 929710-01-10 929710-01-12 929710-01-13 929710-01-15 929710-01-16 929710-01- 25 929745-01-06-I 929745-01-24-I 929745-02-01-I 929745-02-02-I 929834-01-01 929834-01-05 929834-01-26 929834-01-28 929834-01-32 929834-04-16 929834-05-07 929834-05-09 929835-01-02 929835-01-03 929835-01- 07 929835-01-09 929835-01-10 929835-01-15 929835-01-17 929835-01-18 929835-01-20 929835-01-26 929836- 01-01 929836-01-06 929836-01-07 929836-01-12 929836-01-13 929836-01-16 929836-01-17 929836-01-21 929836-01-26 929836-01-32 929836-04-26 929836-09-03 929836-09-04 929836-09-06