9000 SERIES/MOLDED SIP REED RELAYS 9000 Series High Performance SIP Reed Relays The SIP relay is the industry standard when high reliability and consistent perfor- mance are desired in a compact package. The 9001 and 9002 are high performance relays ideally suited for Automatic Test Equipment, Instrumentation, RF and Tele- communications applications. The specification tables allow you to select the appropri- ate relay for your application. 9000 Series Features u High Insulation Resistance - 1012Ω minimum (1013Ω typical) u High reliability, hermetically sealed contacts for long life (tested up to 1 Billion Operations) u High dielectric strength available, consult factory u High speed switching compared to electromechanical relays u Molded thermoset body on integral lead frame design u Coaxial Shield for 50Ω impedance and switching of fast rise time digital pulses - 9002 only u Optional Coil Suppression Diode - protects coil drive circuits u UL File #E67117, CSA File #028537 - Contact factory for details u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9001 Model 9002 .760 Max (19.3) .780 Max. .760 Max (19.3) .200 Max (5.08) (19.8) w/Shell .200 Max (5.08) .780 Max. .222 Max. (5.64) w/Shell .133 .222 Max. (5.64) w/Shell (19.8) w/Shell (3.4) Max. .020 .300 Max (7.6) .020 .133 (0.5) .320 Max. (8.1) w/Shell (0.5) (3.4) Max. .300 Max (7.6) .320 Max. (8.1) w/Shell .020 REF. .100 (Typ.) (0.51) .010 (2.54) .200 (Typ.) .200 (Typ.) (0.25) (5.08) .010 (5.08) (0.25) Alternate Package 30o .760 Max (19.3) .780 Max. .200 Max (5.08) (19.8) w/Shell .222 Max. (5.64) w/Shell .020 (0.5) .300 Max (7.6) .320 Max. (8.1) w/Shell .200 (Typ.) .0(200.5 R1E)F. (3.4.1) 3M3ax. Ordering Information (5.08) .010 (0.25) Part Number 90XX-XX-XX Model Number General Options 9001 9002 0 = No Diode Coil Voltage 1 = Diode2 NOTE 05=5 volts Magnetic Shield Option 12=12 volts uFor RF Graph Performance, see “RF Graphs” section 0 = No Shield of the Reed Relay Technical & Application Information 1 = Shield 07082013 tel: (401) 943.2686 | fax: (401) 942.0920

MODEL NUMBER 90012 90022 Parameters Test Conditions Units 4 Pin SIP 6 Pin SIP COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 Coil Resistance +/- 10%, 25° C Ω 500 1000 350 750 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 Life Expectancy-Typical1 Signal Level 1.0V, 10mA x 106 Ops. 1000 1000 Static Contact 50mV, 10mA Ω 0.150 0.150 Resistance (max. init.) Dynamic Contact 0.5V, 50mA Ω 0.200 0.200 Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins Ω 1012 1012 (minimum) at 100V, 25°C, 40% RH No Shield pF 0.7 - Capacitance - Typical Shield Floating pF - 0.8 Across Open Contacts Shield Guarding pF - 0.1 No Shield pF 1.4 - Open Contact to Coil Shield Floating pF - 1.4 Shield Guarding pF - 0.5 Contact to Shield Contacts Open, Shield Floating pF - 1.4 Between Contacts VDC/peak AC 300 300 Dielectric Strength Contacts to Coil VDC/peak AC - 1500 (minimum) Contacts/Shield to Coil VDC/peak AC 1500 1500 Operate Time - including At Nominal Coil Voltage, msec. 0.35 0.35 bounce - Typical 30 Hz Square Wave Release Time - Typical msec. 0.1 0.1 Top View: 1 1 Dot stamped on relay refers to pin #1 5 Grid = .1”x.1” (2.54mm x 2.54mm) 2 2 3 3 6 4 4 Notes: 1 Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open. 2 Optional diode is connected to pin #2(+) and pin #3(-). Correct coil polarity must be observed. Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C oto Technology: 9001-05-01 9001-05-00 9002-05-01 9002-05-00 9001-12-00 9001-12-01 9001-05-10 9001-05-11 9001-12-11 9002-05-10 9002-12-00 9002-12-10 9002-12-01 9001-05-12 9001-05-02 9002-05-02 9001-12-10 9002-05-11 9002-12-11