8900 Series Dissipative Rubber Mats and Rolls 8900 Series Dissipative Rubber Mats and Rolls meet ANSI/ESD S20.20 required limit and the recommendation of work surface Made in the United States of America standard ANSI/ESD S4.1. The product is constructed using a top color layer of static dissipative neoprene rubber laminated to a bottom Electrical Properties Typical Value Test Method black layer of conductive neoprene rubber. Both layers are made from Color Top Layer Resistances vulcanized synthetic rubber, which offers resistance to oil, grease Surface to Ground (Rtg) 1 x 105 to < 1 x 109 ohms ANSI/ESD S4.1 & ESD TR53 and most common solvents. They offer increased resistance to heat Surface to Surface (Rtt) 1 x 105 to < 1 x 109 ohms ANSI/ESD S4.1 & ESD TR53 and hot solder as compared to vinyl or olefin materials. Non-standard Conductive Bottom Layer Resistance sizes are available on a custom order basis. Compatible with Surface to Surface (Rtt) < 1 x 105 ohms ANSI/ESD S4.1 & ESD TR53 Continuous or Constant Monitors. Physical Properties Typical Value Other Properties Typical Value Material Dual-layer rubber material Heat Resistance Does not melt or burn when coming into contact Thickness* 0.065" (1.7 mm) with hot solder and Hardness 70 +/- 5 Shore A soldering irons Tolerance Width +/- 0.250" Length +/- 0.250" Chemical Resistance Resistance to degradation Thickness +/- 10% by inorganic acids, organic acids, reducing agents, Color* Blue, Gray (Top) aliphatic hydrocarbons, Black (Bottom) mineral oil, aldehydes, and Texture* Slight embossed amines 8900 Table Mat Kit shown with included hardware Available in Blue or Gray Cutting Material: Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical, allow the material to condition for at least 4 hours before cutting to size. Always use care. Trim with a sharp knife or razor blade. Grounding: If the material is used on top of an already properly grounded surface, grounding hardware may Table Mat Kit Item Numbers not be necessary. Where no properly grounded surface is available, grounding hardware is required to provide Table Mat Kit Includes: a path-to-ground. Size Blue Gray 1 Table Mat, size as specified *Color, texture and thickness may vary between lots and mills. 2' x 4' 8900 8901 1 3048 Wrist Strap Grounding System (0.6 m x 1.2 m) 2 3034 Snap Fasteners (installed) Table Roll Item Numbers Table Roll Includes: Size Blue Gray 1 Table Roll, size as specified Limited Lifetime Warranty: SCS warrants for one year that 8900 Series matting products will be free of defects in materials and 24" x 50' 8902 workmanship and will guarantee dissipative/conductive mat properties for the life of the mat. Damage to matting (0.6 m x 15.2 m) caused by misuse of any kind, including using inappropriate cleaners is not covered by SCS Limited Warranty. 30" x 50' 8903 (0.7 m x 15.2 m) RoHS 3, REACH, and Conflict Minerals Statement None of the RoHS 3 restricted materials or REACH substances of very high concern as of 2018/08/01, or 36" x 50' 8904 Conflict Minerals are intentionally added in manufacturing this product. Ref: European Union Directive (EU) (0.9 m x 15.2 m) 2015/853 ammending Annex II of the RoHS 2 Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies. 48" x 50' 8905 8906 Specifications and procedures subject to change without notice. (1.2 m x 15.2 m) 8900 SERIES DISSIPATIVE RUBBER MATS AND ROLLS DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com NUMBER October PHONE: EAST: (919) 718-0000 | WEST: (909) 627-9634 8900 2018 © 2018 DESCO INDUSTRIES INC Employee Owned

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S CS: 8903 8905 8900 8904 8906 8901 8902