Datasheet Panel Mount Dual GN Series • Current rating 25 and 40 Amps • Output voltage 24-280 VAC and 48-660 VAC • Direct bond copper substrate • Back to back dual SCR output • 4000 VAC optical isolation • Zero Voltage and Instantaneous Turn-On • UL/cUL Recognized, CE Compliant PRODUCT SELECTION 1/4” Quick Connect 280 VAC 1/4” Quick Connect 660 VAC Locking Connector 280 VAC Control Voltage 25 A 40 A 25 A 40 A 25 A 40 A 4-15 VDC 84140000 84140200 84140500 84140600 84140800 84140900 17-32 VDC 84140410 84134210 84140510 84140610 84140810 84140910 AVAILABLE OPTIONS Series Rated Load Current Control Voltage Operating Voltage 84140 0 1 U0 0: 25 Amp/Zero Voltage Turn-On 0: 4-15 VDC 0: 24-280 VAC 1: 25 Amp/Instantaneous Turn-On 1: 17-32 VDC 1/4” Quick Connect 280 VAC 2: 40 Amp/Zero Voltage Turn-On 3: 40 Amp/Instantaneous Turn-On 5: 25 Amp 0: 4-15 VDC 0: 48-660 VAC/Zero Voltage Turn-On 1/4” Quick Connect 660 VAC 6: 40 Amp 1: 17-32 VDC 1: 48-660 VAC/Instantaneous Turn-On 8: 25 Amp 0: 4-15 VDC 0: 24-280 VAC/Zero Voltage Turn-On Locking Connector 280 VAC 9: 40 Amp 1: 17-32 VDC 1: 24-280 VAC/Instantaneous Turn-On OUTPUT SPECIFICATIONS (1) Description 280 VAC 660 VAC Operating Voltage [Vrms] 24-280 48-660 Transient Voltage(t=1 min.) [Vpk] 550 1000 Maximum Off-State Leakage Current @ Rated Voltage (@ max. line voltage) [mArms] 0.1 0.25 OUTPUT SPECIFICATIONS (1) Description 25 A 40 A Maximum Load Current [Arms] 25 40 Minimum Load Current [mArms] 100 100 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 275/300 710/750 1 Second surge current (50/60 Hz @ Ta=25°C) [Apk] 85 150 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.3 Thermal Resistance Junction to Case (Rjc) [°C/W] 0.6 0.4 Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 380/370 2520/2320 Maximum Off-State dv/dt @ Maximum Rated Voltage [V/μsec] 500 500 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount INPUT SPECIFICATIONS (1) Description 84140x0x 84140x1x Control Voltage Range [Vdc] 4-15 17-32 Minimum Turn-On Voltage [Vdc] 4 17 Must Turn-Off Voltage [Vdc] 1 1 Minimum Input Current (for on-state) [mA] 7.5 13 Maximum Input Current [mA] 34 24 Nominal Input Impedance [Ohms] 500 1500 Maximum Turn-On Time [msec] (2) 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle GENERAL SPECIFICATIONS(1) Description Parameters Ambient Operating Temperature Range -40 to 80 °C Ambient Storage Temperature Range -40 to 100 °C Input to Output Isolation 4000 Vrms Input/Output to Ground Isolation 2500 Vrms Input to Output Capacitance 8pF Operation Frequency 47 to 63 Hz Housing Material UL94 V-0 (self extinguishing) Weight (typical) 3.2 oz (91.5g) GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Turn-on time for Instantaneous turn-on versions is 0.02 msec. For additional information or specific questions, contact Crydom Technical Support. WIRING DIAGRAM AC AC V V 2A ( ) 2B ( ) Load Load 1A ( ) 1B ( ) SOLID STATE RELAY Input A - + Input B + - Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount EQUIVALENT CIRCUIT BLOCK DIAGRAMS -DC - 2A AC T T U Trigger U NP Circuit TP I U O +DC + 1A AC Current Limiter -DC - 2B AC T T U Trigger U NP Circuit TP I U O +DC + 1B AC Current Limiter MECHANICAL SPECIFICATIONS(1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 1.78 Mounting [45.3] Hole/Slot 1.17 0.19 [4.9] [29.7] DIA. 0.18 1.00 [4.7] [25.4] 0.56 [14.3] SOLID STATE RELAY 1.87 1.21 1.31 [47.5] [30.6] 0.86 [33.2] [21.8] Input A - + Input B Mating Connector for 841408xxx and 841409xxx + - Molex # 50-57-9404 without pins 0.60 2.30 Crimp Pins Molex # 16-02-0103 [15.2] [58.4] 0.74 Pin .025 SQ [18.8] .100 CENTERS 0.45 (4 places) [11.5] Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount THERMAL DERATE INFORMATION 25 A 40 A 0.7°C/W 1°C/W 1.5°C/W 2°C/W 0.5°C/W 1°C/W 1.5°C/W 2°C/W 50 80 nnelAmp) 40 nnelAmp) 7600 Chaent ( 30 Chaent ( 50 mbined put Curr 20 mbined put Curr 234000 Cout 10 Cout O O 10 0 0 20 30 40 50 60 70 80 20 30 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) AGENCY APPROVALS EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: Certified according to EN 62314:2006 IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3 E79183 LR 38595 Rev. 092616 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. ONE. • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie • Spenga tutta 备之前请先 power before suministros de sources jeglichen l'alimentazion 关闭电源。 installing or energia a este d'énergie de Strom ab, der e che fornisce working with equipo antes cet appareil dieses Gerät questa 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor apparecchiatu con este equipo. travailler Sie an dem ra prima del 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten lavorare a questa 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen apparecchiatu ra and replace all las conexiones • Vor dem covers before y colocar todas • Vérifier tous • Verificare tutti Drehen auf turning on las tapas antes connections, et i collegamenti Energie alle power. de energizer remettre tous e sostituire Anschlüsse el equipo. couverts en tutte le coperture Failure to follow olace avant de überprüfen prima della these El mettre sous und alle rotazione instructions will incumplimiento Abdeckungen sull'alimentazi one result in death de estas De non-suivi de ersetzen. or serious injury. instrucciones ces instructions Unterlassung L'omissione di puede provocar provoquera la dieser seguire queste la muerte o mort ou des Anweisungen istruz ioni lesiones serias. lésions sérieuses können zum provocherà la sérieuses. Tode oder zu morte o di schweren lesioni serie Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.