Datasheet Panel Mount GN Series DC Output SSRs • Current rating 10, 15 and 30 Amps • Output voltage 3-60, 1-50, 1-100 and 1-200 VDC • Transistor and Mosfet Output • Available with or without IP20 touch-safe cover • LED Input Status Indicator • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10 A 15 A 30 A 3-32 VDC 84134750 3.5-32 VDC 84134850 84134860 84134870 AVAILABLE OPTIONS Output Type Control Thermal Pad 7: Transistor Voltage Blank: Not included Series 8: MOSFET 0:3.5-32 VDC H: Included 8413 4 7 5 U0 H Touch Safe Cover Rated Voltage & 4: Not included (IP00) Load Current 7: Included (IP20) 5: 3-60 VDC, 10 Amps (with output type 7 only) 5: 1-200 VDC, 10 Amps 6: 1-100 VDC, 15 Amps With output type 8 only 7: 1-50 VDC, 30 Amps Required for valid part number For options only and not required for valid part number OUTPUT SPECIFICATIONS (1) Description 8413x750 8413x850 8413x860 8413x870 Recommended Operating Voltage [Vdc] 3-48 1-150 1-72 1-36 Absolute Maximum Rating [Vdc] 60 200 100 50 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1 0.1 0.1 0.1 Maximum Load Current [Adc] (2) 10 10 15 30 Minimum Load Current [mA] 100 0.1 0.1 0.1 Maximum On-State Voltage Drop @ Rated Current [Vdc] 1.4 2.1 0.8 0.8 Maximum On-State Resistance [RDS-ON] [Ohms] N/A 0.21 0.05 0.03 Maximum Surge Current [Adc] (10msec) 15 50 50 72 Thermal Resistance Junction to Case (Rjc) [°C/W] 2 1.25 2.1 1.5 Minimum Heat Sink for Rated Current @ 40°C [°C/W] 5 1.5 2 2 Maximum Pulse Width Modulation Frequency [Hz] (3) 1500 2000 2500 1200 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount INPUT SPECIFICATIONS (1) Description 8413x750 8413x8xx Control Voltage Range 3-32 VDC 3.5-32 VDC Maximum Reverse Voltage -32 VDC -32 VDC Minimum Turn-On Voltage 3 VDC 3.5 VDC (4) Must Turn-Off Voltage 1 VDC 1 VDC Minimum Input Current (for on-state) 9 mA 11 mA Maximum Input Current [mA] 14.5 mA 15 mA Nominal Input Impedance [Ohms] Current Regulated Maximum Turn-On Time [μsec] 100 75 Maximum Turn-Off Time [μsec] 200 50 GENERAL SPECIFICATIONS(1) Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3700 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (5) -40 to 100 °C Ambient Storage Temperature Range -40 to 100 °C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator Green MTBF (Mean Time Between Failures) at 40°C ambient temperature (6) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 60°C ambient temperature (6) 7,210,376 hours (823 years) GENERAL NOTES (1) All parameters at 25°C unless otherwise specified. (2) Heat sinking required, see derating curves. (3) 8 VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current. (4) Increase minimum voltage by 1V for operations from -20 to -40°C. (5) Maximum ambient temperature for 8413x750 is 80°C, decrease maximun control voltage 1.35V/°C above 80°C ambient temperature. (6) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). For additional information or specific questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount WIRING DIAGRAM * Inductive loads must be diode suppresed. + + - V Load * * Load V Recommended Wire Sizes - + + Terminals Wire Size Wire Pull-Out (Solid / Stranded) Strength (lb)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] Input 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] 1 OUTPUT +2 1 OUTPUT +2 SOLID STATE RELAY SOLID STATE RELAY 20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133] 4 INPUT +3 4 INPUT +3 Output 2 x 10 AWG (5.3 mm2) / 5.3 110 [490] 2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400] + + V V - - EQUIVALENT CIRCUIT BLOCK DIAGRAMS Input Current vs Input Voltage Standard Regulated DC Input 14 +DC 33 22 +DC mA)12 10 nt ( 8 INPUT CCoirncturoitl TCriirgcgueitr OUTPUT ut Curre 46 np 2 I -DC 44 11 -DC 0 Current 0 5 10 15 20 25 30 35 Limiter DC Input Voltage MECHANICAL SPECIFICATIONS(1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination, IP00 Screw Termination, IP20 1.1 [27.9] 0.89 1.10 Mounting Mounting [22.6] [27.9] Hole/Slot 0.49 Hole/Slot 0.49 0.19 [4.9] [12.4] 0.19 [4.9] [12.4] DIA. DIA. 1.88 1.7 2.25 1.88 1.7 2.32 2.25 [47.6] [43.2] [57.3] [47.6] [43.2] [58.8] [57.3] 1.0 1.0 [25.4] 1.22 [25.4] 1.75 [30.9] 1.75 [44.5] [44.5] Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount THERMAL DERATE INFORMATION (i) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. 8413x750 8413x850 5ºC/W No Heat Sink (*) 2ºC/W 3ºC/W 5ºC/W 10 10 s) s) mp 8 mp 8 A A nt ( 6 nt ( 6 e e urr 4 urr 4 C C ad 2 ad 2 o o L L 0 0 20 30 40 50 60 70 80 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) Ambient Temperature (ºC) 8413x860 8413x870 2ºC/W 3ºC/W 5ºC/W 2ºC/W 3ºC/W 5ºC/W No Heat Sink (*) 15 30 ps) ps) 25 m m nt (A 10 nt (A 20 e e 15 Curr 5 Curr 10 d d oa oa 5 L L 0 0 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) Ambient Temperature (ºC) SURGE CURRENT INFORMATION 8413x750 8413x850 20 70 60 Surge Current (Amp) 11505 Surge Current (Amp) 1234500000 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount Surge Duration (msec) Surge Duration (msec) 8413x860 8413x870 80 150 70 mp) 60 mp)125 nt (A 50 nt (A100 urre 40 urre 75 C 30 C e e 50 urg 20 urg S S 25 10 0 0 0.1 1 10 100 1000 0.1 1 10 100 1000 Surge Duration (msec) Surge Duration (msec) Period For Pulse Width Modulation applications select the curve according duty factor and pulse duration as following. Duty Factor 10% Pulse W idth Duty Factor = x100 (%) Duty Factor 20% Period Duty Factor 50% Pulse Width (i) for Single Surge Pulse Tc=40°C ;Tj 175°C (ii) for Repetitive Surge Pulse Tc=40°C ;Tj 130°C AGENCY APPROVALS EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: E46203 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ACCESSORIES Recommended Accessories Cover Hardware Heat Sink Thermal Resistance Lug Terminal Thermal Pad Kit Part No. [ºC/W] KS101 HK1 HS501DR 5.0 TRM1 HSP-1 HK4 HS301 / HS301DR 3.0 TRM6 HSP-2 HS251 2.5 HS201 / HS201DR 2.0 HS202 / HS202DR 2.0 HS172 1.7 HS151 / HS151DR 1.5 HS122 / HS122DR 1.2 HS103 / HS103DR 1.0 HS101 1.0 HS073 0.7 HS072 0.7 HS053 0.5 HS033 0.36 HS023 0.25 Rev. 092816 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. ONE. • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie • Spenga tutta 备之前请先 power before suministros de sources jeglichen l'alimentazion 关闭电源。 installing or energia a este d'énergie de Strom ab, der e che fornisce working with equipo antes cet appareil dieses Gerät questa 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor apparecchiatu con este equipo. travailler Sie an dem ra prima del 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten lavorare a questa 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen apparecchiatu ra and replace all las conexiones • Vor dem covers before y colocar todas • Vérifier tous • Verificare tutti Drehen auf turning on las tapas antes connections, et i collegamenti Energie alle power. de energizer remettre tous e sostituire Anschlüsse el equipo. couverts en tutte le coperture Failure to follow olace avant de überprüfen prima della these El mettre sous und alle rotazione instructions will incumplimiento Abdeckungen sull'alimentazi one result in death de estas De non-suivi de ersetzen. or serious injury. instrucciones ces instructions Unterlassung L'omissione di puede provocar provoquera la dieser seguire queste la muerte o mort ou des Anweisungen istruz ioni lesiones serias. lésions sérieuses können zum provocherà la sérieuses. Tode oder zu morte o di schweren lesioni serie Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: 84134750 84134850 84134860 84134870 84137750 84137850 84137860 84137870 84134750H