Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 17 n DC axial fans atio m or nf I s n a al f xi a C D DC axial fan overview 19 s DC axial fans / DC diagonal fans 23 n a al f g u ntrif e c C D s al ci e p s - s n a C f D x x a m - / i x x a m C A s n a al f xi a C A s n a al f g u ntrif e c C A s e ori s s e c c A s e v ati nt e s 17 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 18 DC fans mm m3/h (cid:3) 25 x 8 250 2,1...4,5 23 (cid:3) 40 x 10 400 F 6...9 24 (cid:3) 40 x 20 400 10...13,5 25 (cid:3) 40 x 25 400 J 19...24 26 (cid:3) 50 x 15 500 F 11...20 27 Technical information (cid:3) 60 x 15 600 F 19...33 28 (cid:3) 60 x 25 620 21...67 29 (cid:3) 60 x 25 630 40...44 30 (cid:3) 60 x 25 600 N 21...56 31 Range of fans Voltage range (cid:3) 60 x 25 600 N VARIOFAN 16...41 32 ebm-papst offers you the widest full product Many of our DC fans can be operated on volta- (cid:3) 60 x 32 600 J 70...84 33 (cid:3) 70 x 15 700 F 28...44 34 line of DC axial and diagonal fans:From 25 mm ges that are up to 50% lower and 25% higher (cid:3) 80 x 25 8450 33...118 35 to 280 mm in size. Every single type of fan can than their nominal voltage (see Voltage range in (cid:3) 80 x 25 8400 N 33...79 36 be optimally integrated in the respective device the technical tables). This enables the air per- (cid:3) 80 x 25 8400 N VARIOFAN 20...58 37 (cid:3) 80 x 32 8300 32...80 38 concept. The highly economical brushless motor formance to be adapted to the cooling require- (cid:3) 80 x 38 8200 J 132...222 39 technology of these fans provides a unique ments and allows the noise to be reduced, even (cid:3) 92 x 25 3400 N 61...102 40 variety of intelligent innovations that can be if the fan does not have a control input. (cid:3) 92 x 25 3400 N VARIOFAN 44...84 41 (cid:3) 92 x 32 3300 56...107 42 realised today at prices that would have been (cid:3) 92 x 38 3200 J 130...280 43 unthinkable just a few years ago. Closed-loop speed control and monitoring (cid:3) 119 x 25 4400 F 94...170 44 Closed-loop speed control and function monito- (cid:3) 119 x 25 4400 FN 200...225 45 (cid:3) 119 x 32 4300 95...204 46 Electronic protection against ring are becoming increasingly important in (cid:3) 119 x 32 4300 VARIOFAN 61...170 47 reverse polarity many applications. ebm-papst offers many fans (cid:3) 119 x 38 4400 150...285 48 ebm-papst DC fans have electronically commu- in the standard design with a control input and (cid:3) 119 x 38 4100 N 160...237 49 (cid:3) 119 x 38 4100 NHH..NH6260...440 50 tated drives with electronic protection against open collector speed signal. (cid:3) 119 x 38 4100 NH7..NH8500...570 51 reverse polarity.The electronics are conveniently (cid:3) 119 x 38 DV 4100 275 52 located in the fan hub. S-Force (cid:3) 127 x 38 5200 N 187...338 53 (cid:3) 127 x 38 DV 5200 270...324 54 The new S-Force fans with their extremely high (cid:3) 135 x 38 5100 N 122...250 55 Product life expectancy blower capacity of up to 950 m3/h and pressu- (cid:3) 140 x 51 5300 338 56 A distinctive feature of DC fan technology is re build-up of up to 1200 pascals are capable (cid:3) 140 x 51 5300 TD 410...670 57 Ø 150 x 38 7100 N 360...420 58 the convincingly high product life expectancy. of dealing with the extreme heat load. If nee- Ø 150 x 55 7200 N 360 59 Thanks to the excellent efficiency of the brush- ded, these fans can produce up to 100% more 172x160x52 6100 350 60 Ø 172 x 51 6300 395...545 61 less drives, the thermal load of the bear ings is output under full load and they work with a Ø 172 x 51 6300 TD 600...950 62 reduced, thus con siderably increasing the life much broader delivery bandwidth than current 172x160x51 6300 TD 710...950 63 expectancy of the fans. models. This makes them ideal for equipment Ø 172 x 51 DV 6200 540 64 Ø 172 x 51 DV 6200 TD 100...700 65 and systems with a high density of compo- 172x150x51 6400 205...480 66 Protection class nents. Thanks to intelligent motor features, they 172x150x51 6400 TD 90...900 67 DC fans with sleeve and ball bearings are pow- can be individually adapted for any application. 172x160x51 DV 6400 530 68 172x160x51 DV 6400 TD 100...680 69 ered by Class E insulated motors. All ebm-papst S-Force fans are available in 5 standard dimen- 220x200x51 2200 FTD 790...1220 70 fans conform to the requirements of protection sions. (cid:3) 225 x 80 W1G 200 1090 71 class IP 20. Fans conforming to IP 54 and spe- (cid:3) 225 x 80 K1G 200 1020...1245 72 (cid:3) 225 x 89 K3G 200 1215...1640 73 cial protection classes are also avail able. (cid:3) 280 x 80 W1G 250 1920 74 18

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 19 n DC fans Axial fans for DC operation o ati m or Overview of air performance nf I s n a Dimensions Series Air flow Page DC axial f mm m3/h 10 20 30 40 50 60 708090100 200 300 400 500 6007008009001000 2000 3000 (cid:3) 25 x 8 250 2,1...4,5 23 (cid:3) 40 x 10 400 F 6...9 24 ns a (cid:3) 40 x 20 400 10...13,5 25 al f (cid:3) 40 x 25 400 J 19...24 26 ug (cid:3)(cid:3) 5600 xx 1155 560000 FF 1119......2303 2278 entrif (cid:3) 60 x 25 620 21...67 29 C c (cid:3) 60 x 25 630 40...44 NEW 30 D (cid:3) 60 x 25 600 N 21...56 31 (cid:3) 60 x 25 600 N VARIOFAN 16...41 32 (cid:3) 60 x 32 600 J 70...84 NEW 33 als (cid:3) 70 x 15 700 F 28...44 34 eci (cid:3) 80 x 25 8450 33...118 NEW 35 sp (cid:3) 80 x 25 8400 N 33...79 36 s - (cid:3) 80 x 25 8400 N VARIOFAN 20...58 37 an (cid:3) 80 x 32 8300 32...80 38 C f D (cid:3) 80 x 38 8200 J 132...222 39 (cid:3) 92 x 25 3400 N 61...102 40 (cid:3) 92 x 25 3400 N VARIOFAN 44...84 41 (cid:3) 92 x 32 3300 56...107 42 xx (cid:3) 92 x 38 3200 J 130...280 43 ma (cid:3) 119 x 25 4400 F 94...170 44 / i- (cid:3) 119 x 25 4400 FN 200...225 45 x x (cid:3) 119 x 32 4300 95...204 46 ma (cid:3) 119 x 32 4300 VARIOFAN 61...170 47 AC (cid:3) 119 x 38 4400 150...285 48 (cid:3) 119 x 38 4100 N 160...237 49 (cid:3) 119 x 38 4100 NHH..NH6260...440 50 (cid:3) 119 x 38 4100 NH7..NH8500...570 51 (cid:3) 119 x 38 DV 4100 275 52 ns a (cid:3) 127 x 38 5200 N 187...338 53 al f (cid:3) 127 x 38 DV 5200 270...324 54 xi a (cid:3) 135 x 38 5100 N 122...250 55 C (cid:3) 140 x 51 5300 338 NEW 56 A (cid:3) 140 x 51 5300 TD 410...670 57 Ø 150 x 38 7100 N 360...420 58 Ø 150 x 55 7200 N 360 59 s 172x160x52 6100 350 NEW 60 n a Ø 172 x 51 6300 395...545 NEW 61 al f Ø 172 x 51 6300 TD 600...950 NEW 62 g u 1Ø721x7126 0x x5511 6D3V0 602 T0D0 751400...950 NEW 6634 ntrif e Ø 172 x 51 DV 6200 TD 100...700 65 C c 172x150x51 6400 205...480 66 A 172x150x51 6400 TD 90...900 67 172x160x51 DV 6400 530 68 172x160x51 DV 6400 TD 100...680 69 220x200x51 2200 FTD 790...1220 NEW 70 es (cid:3) 225 x 80 W1G 200 1090 71 ori s (cid:3) 225 x 80 K1G 200 1020...1245 NEW 72 es (cid:3) 225 x 89 K3G 200 1215...1640 NEW 73 cc A (cid:3) 280 x 80 W1G 250 1920 74 10 20 30 40 50 60 708090100 200 300 400 500 6007008009001000 2000 3000 m3/h s e v ati nt e s 19 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 20 Optional special versions Information on pictograms On the pages of the catalogue and on the following overview pages, the pictograms illustrated below provide information about technically possi- ble special versions in the fan line presented. Please note that these special versions are not possible for all voltages and speeds, and not in all combinations. The special versions are designed for specific customers and projects and are not usually available off the shelf. Speed signal PWM control input The fan uses a separate wire to output information The speed of the fan can be changed via a pulse-width- PPWWMM about its speed, and thus about the speed of the rotor. modulated signal. This signal is applied to a specially For technical details, please refer to page 110. provided wire. For technical details, please refer to page 121. NN Go / No-go alarm GG AA Analogue control input The fan uses a separate wire to output a static signal The speed of the fan can be changed via a control volta- when it is stationary, thus providing information about ge. This control voltage is applied to a specially provided whether or not the rotor is turning. For technical wire. For technical details, please refer to page 121. details, please refer to page 117. Alarm with limit speed Multi-option control input If the speed drops below a certain level defined in the The fan has a control input that the user can trigger eit- fan's electronics, the fan will emit a static signal, thus her using a PWM signal, an analogue signal or a providing information about whether or not the rotor is resistor. For technical details, please refer to page 122. turning. For technical details, please refer to page 114. External temperature sensor HH Protection against moisture PP TT An NTC is connected to the fan via a separate wire and Protection for the fan's electronics against moisture and the fan changes its speed depending on the temperatu- condensation. For technical details, please refer to re at the NTC. For technical details, please refer to page 123. page 120. ¤ IP 54 Internal temperature sensor IIPP5544 Protection of motor and PCB board against splashed II In this case, the NTC is integrated into the fan and the water and humidity. For technical details, please refer to fan changes its speed depending on the temperature at page 123. the NTC. For technical details, please refer to page SS Protection against salt spray fog PP 120. Protection of fan against the damaging effects of salt spray fog. For technical details, please refer to page 123. 20

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 21 n Axial fans for DC operation o ati m or Overview of technically feasible designs nf I Dimensions VDE, UL, CSASintec sleeve bearSiengnss/obrall bearingsG o / No-go alAlararmm with limit sEpxteeerdnal temIpnetreartnuarl et esemnpsePorraWtuMr ec osnetrnosl oirAnnpaluto gue controlM iulntip-uot ption controlH iunmpiudti t y proIteP ct>io= nIP54Salt spray fog protectPiaogne xial fans Axial fans Please note that these special versions are not possible DC a for all voltages and speeds, and not in all combinations. Series mm OPTIONAL P. 250 25 x 25 x 8 yes • – – – – – – – • – – 23 The special versions are designed for specific custo- 400 F 40 x 40 x 10 yes • • – – – – – – • – – 24 mers and projects. As a rule they are not available off 400 40 x 40 x 20 yes • • – – – • – – • – – 25 the shelf and are tied to minimum volumes. ans 400 J 40 x 40 x 25 yes • • – – – – – – • • – 26 Please consult your customer support representative al f 500 F 50 x 50 x 15 yes • • – – – • – – • – – 27 ug 600 F 60 x 60 x 15 yes • • – – – • – – • – – 28 about the feasibility of your special variant. ntrif 620 60 x 60 x 25 yes • • • • • • • – • • – 29 ce NEW 630 60 x 60 x 25 yes • • • • • • • – • • • 30 DC 600 N 60 x 60 x 25 yes / • • – • • – – – • • – 31 600 N VARIOFAN 60 x 60 x 25 yes / • • – • • – – – • – – 32 NEW 600 J 60 x 60 x 32 yes • • – – – – – – • – – 33 als 700 F 70 x 70 x 15 yes • • – – – – – – • – – 34 eci p NEW 8450 80 x 80 x 25 yes • • – – – • – – • – – 35 s - 8400 N 80 x 80 x 25 yes / • • • • • • • – • • – 36 s n a 8400 N VARIOFAN 80 x 80 x 25 yes • • – • • – – – • – – 37 C f 8300 80 x 80 x 32 yes / • • • • • • • – • • • 38 D 8200 J S-Force 80 x 80 x 38 yes • • • • • • • – • – – 39 3400 N 92 x 92 x 25 yes / • • • • • • • – • • – 40 3400 N VARIOFAN 92 x 92 x 25 yes • • – • • – – – • – – 41 xx a 3300 92 x 92 x 32 yes / • • • • • • • – • • • 42 m - 3200 J 92 x 92 x 38 yes • • • • • • • – • • – 43 / i x 4400 F 119 x 119 x 25 yes / • • • • • • • – • – – 44 x a m 4400 FN 119 x 119 x 25 yes • • • • • • • – • – – 45 C A 4300 119 x 119 x 32 yes / • • • • • • • – • • • 46 4300 VARIOFAN 119 x 119 x 32 yes • • • • • • • – • – – 47 4400 119 x 119 x 38 yes • • • • • • • – • – – 48 4100 N 119 x 119 x 38 yes / • • • • • • • – • • • 49 s 4100 NH..NH6 119 x 119 x 38 yes • • • • • • • – • – – 50 an 4100 NH7..NH8 119 x 119 x 38 yes • • • • • • • – • – – 51 al f xi DV 4100 119 x 119 x 38 yes • • • • • • • – • • • 52 a C 5200 N 127 x 127 x 38 yes • • • • • • • – • • • 53 A DV 5200 127 x 127 x 38 yes • • • • • • • – • • • 54 5100 N 135 x 135 x 38 yes • • • • • • • – • • • 55 NEW 5300 S-Force 140 x 140 x 51 yes • • • • • • • – • • • 56 s n 5300 TDS-Force 140 x 140 x 51 yes • • • • • • • • • – – 57 a 7100 N 150 Ø x 38 yes • • • • • • • – • • • 58 al f g NEW 67120000 NN 115702 Øx 1x6 505 x 51 yyeess •• •• •• •• •• •• •• –– •• •• •• 5690 ntrifu e NEW 6300 S-Force 172 Ø x 51 yes • • • • • • • – • • • 61 C c NEW 6300 TDS-Force 172 Ø x 51 yes • • • • • • • • • • • 62 A NEW 6300 TDS-Force 172 x 160 x 51 yes • • • • • • • • • • • 63 DV 6200 172 Ø x 51 yes • • • • • • • – • • • 64 DV 6200 TD 172 Ø x 51 yes • • • • • • • – • • • 65 s e 6400 172 x 150 x 51 yes • • • • • • • – • • • 66 ori 6400 TD 172 x 150 x 51 yes • • • • • • • – • • • 67 ss e DV 6400 172 x 160 x 51 yes • • • • • • • – • • • 68 cc A DV 6400 TD 172 x 160 x 51 yes • • • • • • • – • • • 69 NEW 2200 FTD 200 Ø x 51 yes • • • • • • • • • • • 70 W1G 200 225 x 225 x 80 UL/CSA • • • • – • • • • – • 71 NEW K1G 200 225 x 225 x 80 yes • • • • – • • • • – • 72 NEW K3G 200 225 x 225 x 89 yes • • • • – • • • • – • 73 s * approvals – not yet available Sleeve bearings ve W1G 250 280 x 280 x 80 UL/CSA • • • • – • • • • – • 74 applied for • available Ball bearings ati nt e s 21 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 22 Connection instructions for S-Force fans Special features of S-Force fans The S-Force series is the most powerful product series on the market. S-Force stands for the highest innovation in motor technology, fluid mecha- nics and electronics. The one-of-a-kind power density of the products requires special attention to the application at the customer's facility. Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Service life 255M 2,1 1,2 5 4,5...5,5 5 < 3 0,2 6000 -10...+70 45 000 /14 000 45 000 1 +Vs Due to the high currents in the fans, the load on the electrolyte capaci- 255N 3,2 1,9 5 4,5...5,5 16 < 3 0,4 9 600 -10...+70 40 000 /12 000 40 000 2 /2 tors is greater, which reduces the service life of the capacitor. As a lar- 255H 4,5 2,6 5 4,5...5,5 23 4,4 0,6 12 000 -10...+55 35 000 /12 000* 30 000 3 /2 Power ger or additional capacitor cannot be housed in the fan, the capacitor Supply M 252N 3,2 1,9 12 10...14 15 < 3 0,5 9 000 -10...+70 40 000 /12 000 40 000 2 /2 must be housed in the supply line. Micro- controller 252H 4,5 2,6 12 10...14 23 4,4 0,7 12 000 -10...+55 35 000 /12 000* 30 000 3 If the power pack of the application has a corresponding capacitor, in GND some cases it may be possible to omit the external capacitor. Recommended measure: Additional external capa- citor (thus must be installed as close to the fan as possible < 30 cm). Fan Capacitor Recommended capacitors required We recommend using the following capacitors from Rubycon: 24 VDC: S-Force axial 50 ZL 680 µF; 12,5 mm x 30 mm or 8200 / 3200 JH3-JH4 no 50 ZLH 680 µF 12,5 mm x 30 mm 4100 NH3 / NH4 / NH5 / NH6 no 4100 NH7 / NH8 yes 48 VDC: 5300 / 5300 TD no 100 YXG 470 µF; 16 mm x 35,5 mm or 6300 / 6300 TD no 100 ZLH 470 µF 16 mm x 31,5 mm 2200 FTD no Other capacitors with equal or greater capacitance and equal or lower S-Force centrifugal serial resistance can also be used. RET 97 TD yes ebm-papst St. Georgen offers the following capacitors ex stock: RER 120 TD yes 24 VDC: 1000 µF / 50 V, 16 mm x 25 mm RER 133 TD no Art. No.: 992 0345 000 (LZ 354) RER 160 NTDHH yes REF 175 TD no 48 VDC: 680 µF / 100 V, 18 mm x 40 mm RER 175 TD no Art. No. : 992 0355 000 (LZ 355) RER 190 TD / RG 190 TD no RER 220 TD / RG 220 no RER 225 TDM / RG 225 TDM no RER 225 TD / RG 225 TD yes 22

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 23 n max. 4,5 m3/h DC axial fans atio m or Series 250 25 x 25 x 8 mm nf I Highlights: – Compact fan with low power consumption. s n a General characteristics: al f – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. xi a – Fully integrated electronic commutation. C D – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 5 g. s n a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(20 °C) 10 ebm-papst Standard Service life L(60 °C)10ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 255M 2,1 1,2 5 4,5...5,5 5 < 3 0,2 6000 -10...+70 45 000 /14 000 45 000 1 C f D 255N 3,2 1,9 5 4,5...5,5 16 < 3 0,4 9 600 -10...+70 40 000 /12 000 40 000 2 /2 255H 4,5 2,6 5 4,5...5,5 23 4,4 0,6 12 000 -10...+55 35 000 /12 000* 30 000 3 /2 252N 3,2 1,9 12 10...14 15 < 3 0,5 9 000 -10...+70 40 000 /12 000 40 000 2 /2 x x a 252H 4,5 2,6 12 10...14 23 4,4 0,7 12 000 -10...+55 35 000 /12 000* 30 000 3 m - / i * at 55 °C x x a m C A s n a al f xi a C A s n a al f g u ntrif e c Pa [in HO]2 AC 50 40 3 0,15 es 30 ori s 0,10 2 ces 20 1 Ac 10 0,05 0 0,4 0,8 1,2 1,6 2,0 2,4 CFM 1 2 3 4 m³/h es v ati nt e HHPP 23 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 24 9 DC axial fans 3 max. m /h Series 400 F 40 x 40 x 10 mm Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. General characteristics: – Material: fibreglass-reinforced plastic. impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 17 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(20 °C)10 ebm-papst Standard Service life (60 °C)ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 405 F 8 4,7 5 4,5...5,5 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 405 10,0 5,9 5 4,5...5,5 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 405 FH 9 5,3 5 4,5...5,5 26,0 4,6 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 412 10,0 5,9 12 10...14 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FM 6 3,5 12 10...14 16,5 3,8 0,6 4 300 -20...+70 45 000 / 15 000 47 500 1 412 H 13,5 7,9 12 10...14 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /39 412 F 8 4,7 12 10...14 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 414 10,0 5,9 24 20...28 18 3,8 1,0 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FH 9 5,3 12 10...14 26,0 4,6 0,8 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 414 H 13,5 7,9 24 20...26,5 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /2 414 F 8 4,7 24 20...28 22,1 4,4 0,8 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 414 FH 9 5,3 24 21,6...26,4 26,0 4,4 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 412-099 10,0 5,9 12 10...14 18 3,8 0,8 6 000 -20...+85 50 000 / 20 000 62 500 1 Models with temperature range up to +85 °C. 412 FM-074 6 3,5 12 10...14 16,5 3,8 0,4 4 300 -20...+85 45 000 / 15 000 47 500 1 /2 412 F-130 8 4,7 12 10...14 22,1 4,4 0,6 5 400 -20...+85 45 000 / 15 000 47 500 2 412 FH-132 9 5,3 12 10...14 26,0 4,6 0,7 6 000 -20...+85 45 000 / 15 000 47 500 3 /2 Pa30 [in HO]2 3 25 0,10 2 20 0,08 15 0,06 1 10 0,04 5 0,02 0 1 2 3 4 5 CFM (cid:127) 2 4 6 8 m³/h 24 HHPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 25 n max. 13,5 m3/h DC axial fans atio m or Series 400 40 x 40 x 20 mm nf I Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. s n – Mass: 27 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(20 °C)10ebm-papst Standard Service life (60 °C)ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 s - n a 405 F 8 4,7 5 4,5...5,5 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 405 10,0 5,9 5 4,5...5,5 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 C f D 405 FH 9 5,3 5 4,5...5,5 26,0 4,6 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 412 10,0 5,9 12 10...14 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FM 6 3,5 12 10...14 16,5 3,8 0,6 4 300 -20...+70 45 000 / 15 000 47 500 1 412 H 13,5 7,9 12 10...14 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /39 412 F 8 4,7 12 10...14 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 x 414 10,0 5,9 24 20...28 18 3,8 1,0 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 x a 412 FH 9 5,3 12 10...14 26,0 4,6 0,8 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 m 414 H 13,5 7,9 24 20...26,5 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /2 - / i 414 F 8 4,7 24 20...28 22,1 4,4 0,8 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 x x 414 FH 9 5,3 24 21,6...26,4 26,0 4,4 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 Model with temperature range up to +85 °C. ma C 412-099 10,0 5,9 12 10...14 18 3,8 0,8 6 000 -20...+85 50 000 / 20 000 62 500 1 A 412 FM-074 6 3,5 12 10...14 16,5 3,8 0,4 4 300 -20...+85 45 000 / 15 000 47 500 1 /2 412 F-130 8 4,7 12 10...14 22,1 4,4 0,6 5 400 -20...+85 45 000 / 15 000 47 500 2 s n 412 FH-132 9 5,3 12 10...14 26,0 4,6 0,7 6 000 -20...+85 45 000 / 15 000 47 500 3 /2 al fa xi a C A s n a al f g u ntrif e c Pa [in HO]2 2 AC 50 40 0,15 1 es 30 ori s 0,10 ces 20 c A 10 0,05 0 1 2 3 4 5 6 7 CFM (cid:127) 2 4 6 8 10 m³/h es v ati nt e PPWWMM HHPP 25 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 26 24 DC axial fans 3 max. m /h Series 400 J 40 x 40 x 25 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 26, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 50 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 412 J 19 11,2 12 8...14 39 5,5 2,4 10 300 -20...+70 60 000 / 30000 120 000 1 512 F 20 11,8 12 10,8...13,2 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JH 22 12,9 12 8...13,5 43 5,8 3,0 11 700 -20...+70 60 000 / 30000 120 000 2 /2 514 F 20 11,8 24 21,6...26,4 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JHH 24 14,1 12 8...13,5 46 6,1 3,3 13 000 -20...+60 57 500 / 35000 110 000 3 /2 414 J 19 11,2 24 18...27 39 5,5 2,4 10 300 -20...+70 60 000 / 30000 120 000 1 414 JH 22 12,9 24 18...27 43 5,8 3,0 11 700 -20...+70 60 000 / 30000 120 000 2 /2 512 FL-547 11 6,5 12 11,5...13,2 12 3,7 0,4 3 000 -20...+85 50 000 / 20 000 65 500 1 414 JHH 24 14,1 24 18...27 46 6,1 3,6 13 000 -20...+60 57 500 / 35000 110 000 3 /2 512 F-532 20 11,8 12 10,8...13,2 30 4,5 0,9 5 000 -20...+85 50 000 / 20 000 65 500 2 Pa [in HO]2 3 200 2 150 0,6 1 100 0,4 50 0,2 0 2 4 6 8 10 12 CFM (cid:127) 5 10 15 20 m³/h ¤ 26 HHPP IIPP5544

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 27 n max. 20 m3/h DC axial fans atio m or Series 500 F 50 x 50 x 15 mm nf I Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. s n – Mass: 25 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(20 °C)10ebm-papst Standard Service life L(60 °C)10ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 412 J 19 11,2 12 8...14 39 5,5 2,4 10 300 -20...+70 60 000 / 30000 120 000 1 512 F 20 11,8 12 10,8...13,2 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 C f D 412 JH 22 12,9 12 8...13,5 43 5,8 3,0 11 700 -20...+70 60 000 / 30000 120 000 2 /2 514 F 20 11,8 24 21,6...26,4 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JHH 24 14,1 12 8...13,5 46 6,1 3,3 13 000 -20...+60 57 500 / 35000 110 000 3 /2 414 J 19 11,2 24 18...27 39 5,5 2,4 10 300 -20...+70 60 000 / 30000 120 000 1 Model with temperature range up to +85 °C. x x a 414 JH 22 12,9 24 18...27 43 5,8 3,0 11 700 -20...+70 60 000 / 30000 120 000 2 /2 512 FL-547 11 6,5 12 11,5...13,2 12 3,7 0,4 3 000 -20...+85 50 000 / 20 000 65 500 1 m - 414 JHH 24 14,1 24 18...27 46 6,1 3,6 13 000 -20...+60 57 500 / 35000 110 000 3 /2 512 F-532 20 11,8 12 10,8...13,2 30 4,5 0,9 5 000 -20...+85 50 000 / 20 000 65 500 2 / i x x a m C A s n a al f xi a C A s n a al f g u ntrif e c Pa30 [in HO]2 AC 2 25 0,10 20 0,08 ories 15 0,06 ess c c 10 0,04 1 A 5 0,02 0 2 4 6 8 10 CFM (cid:127) 5 10 15 m³/h es v ati nt e PPWWMM HHPP 27 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 28 33 DC axial fans 3 max. m /h Series 600 F 60 x 60 x 15 mm Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 30 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(20 °C)10ebm-papst Standard Service life L(60 °C)10ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 605 F 29 17,1 5 4,5...5,2 27 4,4 1,1 4 000 -20...+50 50 000 / 20 000 50 000 2 /2 622 L 21 12,4 12 8...15 20 3,7 0,5 3 200 -20...+85 80 000 / 20 000 160 000 1 622 M 30 17,7 12 8...15 29 4,3 1,0 4 550 -20...+75 77 500 / 30 000 150 000 2 612 FL 19 11,2 12 11,5...13,2 16 3,6 0,4 2 650 0...+70 50 000 / 20 000 62 500 1 622 N 40 23,5 12 8...15 35 4,7 1,9 6 100 -20...+70 72 500 / 35 000 140 000 3 /2 612 F 29 17,1 12 10,8...13,2 27 4,4 1,0 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 622 H 46 27,1 12 8...15 39 5,1 2,3 6 850 -20...+70 70 000 / 35 000 140 000 4 612 FH 33 19,4 12 10,0...13,2 31 4,8 1,4 4 500 -20...+60 45 000 / 15 000 47 500 3 /2/39 622 HH 56 33,0 12 8...15 43 5,6 3,5 8 200 -20...+70 65 000 / 32 500 130 000 5 614 F 29 17,1 24 21,6...26,4 27 4,4 1,1 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 NEW 622 /2H3P 67 39,4 12 8...13,2 48 5,9 6,3 9 700 -20...+60 52 500 / 32 500 105 000 6 624 L 21 12,4 24 18...28 20 3,7 1,0 3 200 -20...+70 80 000 / 40 000 160 000 1 Models with temperature range up to +80 / 85 °C. 624 M 30 17,7 24 12...28 29 4,3 1,5 4 550 -20...+70 77 500 / 37 500 150 000 2 612 FL-680 19 11,2 12 11,5...14 16 3,6 0,5 2 650 -20...+85 50 000 / 20 000 62 500 1 624 N 40 23,5 24 12...28 35 4,7 2,2 6 100 -20...+70 72 500 / 35 000 140 000 3 612 F-637 29 17,1 12 10,8...12,6 27 4,4 1,0 3 900 -20...+80 50 000 / 20 000 62 500 2 624 H 46 27,1 24 18...28 39 5,1 2,4 6 850 -20...+70 70 000 / 35 000 140 000 4 624 HH 56 33,0 24 18...28 43 5,6 3,6 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 NEW 624 /2H3P 67 39,4 24 18...28 48 5,9 5,8 9 700 -20...+60 52 500 / 32 500 105 000 6 628 HH 56 33,0 48 36...56 43 5,6 4,2 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 Pa [in HO]2 3 25 2 20 0,08 15 0,06 10 0,04 1 5 0,02 0 3 6 9 12 15 18 CFM (cid:127) 5 10 15 20 25 m³/h 28 HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 29 n 67 DC axial fans o max. m3/h ati m or Series 620 60 x 60 x 25 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Motor with very low structure-borne noise. s n a – Innovative impeller with winglets for low noise. al f – Control inputs, alarm and speed signals available on request. xi a C D General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. s n – Connection via single strands AWG 22, TR 64. Bared and tin-plated. a – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. al f g – Mass: 85 g. ntrifu e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard )Service life L(T10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 605 F 29 17,1 5 4,5...5,2 27 4,4 1,1 4 000 -20...+50 50 000 / 20 000 50 000 2 /2 622 L 21 12,4 12 8...15 20 3,7 0,5 3 200 -20...+85 80 000 / 20 000 160 000 1 C f D 622 M 30 17,7 12 8...15 29 4,3 1,0 4 550 -20...+75 77 500 / 30 000 150 000 2 612 FL 19 11,2 12 11,5...13,2 16 3,6 0,4 2 650 0...+70 50 000 / 20 000 62 500 1 622 N 40 23,5 12 8...15 35 4,7 1,9 6 100 -20...+70 72 500 / 35 000 140 000 3 /2 612 F 29 17,1 12 10,8...13,2 27 4,4 1,0 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 622 H 46 27,1 12 8...15 39 5,1 2,3 6 850 -20...+70 70 000 / 35 000 140 000 4 612 FH 33 19,4 12 10,0...13,2 31 4,8 1,4 4 500 -20...+60 45 000 / 15 000 47 500 3 /2/39 x x 622 HH 56 33,0 12 8...15 43 5,6 3,5 8 200 -20...+70 65 000 / 32 500 130 000 5 ma 614 F 29 17,1 24 21,6...26,4 27 4,4 1,1 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 - NEW 622 /2H3P 67 39,4 12 8...13,2 48 5,9 6,3 9 700 -20...+60 52 500 / 32 500 105 000 6 / i x x 624 L 21 12,4 24 18...28 20 3,7 1,0 3 200 -20...+70 80 000 / 40 000 160 000 1 a m 612 FL-680 19 11,2 12 11,5...14 16 3,6 0,5 2 650 -20...+85 50 000 / 20 000 62 500 1 624 M 30 17,7 24 12...28 29 4,3 1,5 4 550 -20...+70 77 500 / 37 500 150 000 2 AC 624 N 40 23,5 24 12...28 35 4,7 2,2 6 100 -20...+70 72 500 / 35 000 140 000 3 612 F-637 29 17,1 12 10,8...12,6 27 4,4 1,0 3 900 -20...+80 50 000 / 20 000 62 500 2 624 H 46 27,1 24 18...28 39 5,1 2,4 6 850 -20...+70 70 000 / 35 000 140 000 4 624 HH 56 33,0 24 18...28 43 5,6 3,6 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 s NEW 624 /2H3P 67 39,4 24 18...28 48 5,9 5,8 9 700 -20...+60 52 500 / 32 500 105 000 6 an al f 628 HH 56 33,0 48 36...56 43 5,6 4,2 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 xi a C A 1Pa75 [in HO]2 6 s n 140 0,6 al fa g 105 0,4 ntrifu 70 e c Pa [in HO]2 5 35 0,2 AC 125 0 10 20 30 CFM 100 0,4 4 10 20 30 40 50 60 m³/h s e 75 0,3 3 sori s e 50 0,2 2 Acc 25 0,1 1 0 5 10 15 20 25 30 CFM (cid:127) 10 20 30 40 50 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 29 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 30 44 DC axial fans 3 max. m /h Series 630 60 x 60 x 25 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Motor with very low structure-borne noise. – Control inputs, alarm and speed signals available on request. – Developed for applications with stringent environmental requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 70 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 NEW 632 NU 40 23,5 12 6...15 33 5,2 1,8 5 900 -20...+70 85 000 / 42500 170 000 1 612 NGLE 21 12,4 12 8...15 16 3,6 0,6 2 500 -20...+85 80 000 / 27 500 160 000 1 NEW 632 /2HPU 44 25,9 12 10,8...13,2 35 5,4 1,5 6 400 -20...+70 85 000 / 42500 170 000 2 612 NLE 21 12,4 12 8...15 16 3,6 0,4 2 500 -20...+85 80 000 / 27 500 160 000 1 612 NGMLE 25 14,7 12 8...15 19 3,9 0,7 3 000 -20...+80 80 000 / 32 500 160 000 2 NEW 638 /2HPU 44 25,9 48 40...60 35 5,4 1,8 6 400 -20...+70 85 000 / 42500 170 000 2 612 NMLE 25 14,7 12 8...15 19 3,9 0,4 3 000 -20...+85 80 000 / 27 500 160 000 2 612 NGME 35 20,6 12 8...15 28 4,6 1,2 4 100 -20...+75 80 000 / 35 000 160 000 3 612 NME 35 20,6 12 8...15 28 4,6 0,8 4 100 -20...+75 80 000 / 35 000 160 000 3 /2 612 NN 42 24,7 12 8...15 35 5,0 1,6 5 100 -20...+70 70 000 / 35 000 140 000 4 612 NH 46 27,1 12 8...15 37 5,3 2,0 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 612 NHH-118 56 33,0 12 8...15 41 5,7 2,9 6 800 -20...+70 60 000 / 30 000 120 000 6 /2 614 NGL 21 12,4 24 18...28 16 3,6 1,0 2 500 -20...+70 80 000 / 40 000 160 000 1 614 NL 21 12,4 24 18...28 16 3,6 0,9 2 500 -20...+70 80 000 / 40 000 160 000 1 /2 614 NGML 25 14,7 24 18...28 19 3,9 1,2 3 000 -20...+70 80 000 / 40 000 160 000 2 /2 614 NML 25 14,7 24 18...28 19 3,9 1,0 3 000 -20...+70 80 000 / 40 000 160 000 2 614 NGM 35 20,6 24 18...28 28 4,6 1,7 4 100 -20...+70 80 000 / 40 000 160 000 3 /12 614 NM 35 20,6 24 18...28 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 /2/39 614 NN 42 24,7 24 18...28 35 5,0 1,8 5 100 -20...+70 70 000 / 35 000 140 000 4 614 NH 46 27,1 24 18...26 37 5,3 2,1 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 614 NHH 56 33,0 24 18...26 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 614 NHH-119 56 33,0 24 18...28 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 /2 618 NM 35 20,6 48 36...56 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 11[Pa]0100 0,4 [in HO]2 2 618 NN 42 24,7 48 36...56 35 5,0 2,1 5 100 -20...+65 70 000 / 40 000 140 000 4 /2/12/39 90 0,35 80 1 70 0,3 60 0,25 50 0,2 40 0,15 30 20 0,1 10 0,05 0 5 10 15 20 25 [CFM] 5 10 15 20 25 30 35 40 [m3/h] 30 NNGG TT PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 31 n max. 56 m3/h DC axial fans atio m or Series 600 N 60 x 60 x 25 mm nf I Highlights: – Ball bearings and sleeve bearings available. – Some models suitable for use at high ambient temperatures up to 85 °C. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. s n – Mass: 66 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 s - n a 632 NU 40 23,5 12 6...15 33 5,2 1,8 5 900 -20...+70 85 000 / 42500 170 000 1 612 NGLE 21 12,4 12 8...15 16 3,6 0,6 2 500 -20...+85 80 000 / 27 500 160 000 1 C f D 632 /2HPU 44 25,9 12 10,8...13,2 35 5,4 1,5 6 400 -20...+70 85 000 / 42500 170 000 2 612 NLE 21 12,4 12 8...15 16 3,6 0,4 2 500 -20...+85 80 000 / 27 500 160 000 1 612 NGMLE 25 14,7 12 8...15 19 3,9 0,7 3 000 -20...+80 80 000 / 32 500 160 000 2 638 /2HPU 44 25,9 48 40...60 35 5,4 1,8 6 400 -20...+70 85 000 / 42500 170 000 2 612 NMLE 25 14,7 12 8...15 19 3,9 0,4 3 000 -20...+85 80 000 / 27 500 160 000 2 x x 612 NGME 35 20,6 12 8...15 28 4,6 1,2 4 100 -20...+75 80 000 / 35 000 160 000 3 ma - 612 NME 35 20,6 12 8...15 28 4,6 0,8 4 100 -20...+75 80 000 / 35 000 160 000 3 /2 / i x 612 NN 42 24,7 12 8...15 35 5,0 1,6 5 100 -20...+70 70 000 / 35 000 140 000 4 x a m 612 NH 46 27,1 12 8...15 37 5,3 2,0 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 C A 612 NHH-118 56 33,0 12 8...15 41 5,7 2,9 6 800 -20...+70 60 000 / 30 000 120 000 6 /2 614 NGL 21 12,4 24 18...28 16 3,6 1,0 2 500 -20...+70 80 000 / 40 000 160 000 1 614 NL 21 12,4 24 18...28 16 3,6 0,9 2 500 -20...+70 80 000 / 40 000 160 000 1 /2 s 614 NGML 25 14,7 24 18...28 19 3,9 1,2 3 000 -20...+70 80 000 / 40 000 160 000 2 /2 n a 614 NML 25 14,7 24 18...28 19 3,9 1,0 3 000 -20...+70 80 000 / 40 000 160 000 2 al f xi 614 NGM 35 20,6 24 18...28 28 4,6 1,7 4 100 -20...+70 80 000 / 40 000 160 000 3 /12 a C 614 NM 35 20,6 24 18...28 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 /2/39 A 614 NN 42 24,7 24 18...28 35 5,0 1,8 5 100 -20...+70 70 000 / 35 000 140 000 4 614 NH 46 27,1 24 18...26 37 5,3 2,1 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 614 NHH 56 33,0 24 18...26 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 s n a 614 NHH-119 56 33,0 24 18...28 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 /2 al f g 618 NM 35 20,6 48 36...56 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 u 618 NN 42 24,7 48 36...56 35 5,0 2,1 5 100 -20...+65 70 000 / 40 000 140 000 4 /2/12/39 ntrif e c Pa [in HO]2 AC 100 6 80 5 0,3 s e 60 4 ori s 0,2 3 ces 40 c A 20 0,1 2 1 0 5 10 15 20 25 30 CFM (cid:127) 10 20 30 40 50 m³/h es v ati nt NNGG TT II HHPP IIPP55¤44 31 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 32 41 DC axial fans 3 max. m /h Series 600 N VARIOFAN 60 x 60 x 25 mm Highlights: – Open loop speed control by means of external or internal temperature sensor. – Automatic speed adjustment according to cooling requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 66 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 30°C 18 10,6 14 3,5 1,3 2 150 1 612 JH 70 41,1 12 7...13,6 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 612 NGMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 55°C 35 20,6 28 4,6 1,7 4 100 2 614 JH 70 41,1 24 14...26,4 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 30°C 16 9,4 16 3,6 1,0 2 400 3 612 NMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 618 JH 70 41,1 48 36...60 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 55°C 35 20,6 28 4,6 1,4 4 100 4 30°C 23 13,5 18 3,8 1,7 2 900 5 612 NGNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 55°C 41 24,1 35 5,0 2,4 5 100 6 NEW 614 J/2HHP 82 48,3 24 18...30 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 30°C 23 13,5 18 3,8 1,2 2 900 5 NEW 618 J/2HHP 82 48,3 48 38...58 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 612 NNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 55°C 41 24,1 35 5,0 1,5 5 100 6 30°C 23 13,5 18 3,8 1,7 2 900 5 612 NGNV 12 8...12,6 -20...+65 70 000 / 40 000 142 500 55°C 41 24,1 35 5,0 2,4 5 100 6 Pa [in HO]2 2 612NGMI Pa [in HO]2 4 612NMI Pa [in HO]2 6 666111222NNNGNGNNIIV 40 0,15 40 0,15 60 0,25 30 30 0,20 20 0,10 20 0,10 40 0,15 10 0,05 1 10 0,05 3 20 0,10 5 0,05 30°C 55°C 30°C 55°C 30°C 55°C 0 3 6 9 12 15 18CFM 0 3 6 9 12 15 18CFM 0 4 8 12 16 20 CFM (cid:127) 5 10 15 20 25 30 m³/h (cid:127) 5 10 15 20 25 30 m³/h (cid:127) 10 20 30 m³/h V-Types I-Types + NTC- Airflow TSeemnspoerrature NTC TemperatureSensor The temperature sensor for control- ling the motor speed is not included Temperature sensor (NTC-resistor) in delivery. for controlling the motor speed is Temperature sensor LZ 370 see positioned directly in the air flow. accessories. 32 NNGG TT II HHPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 33 n max. 82 m3/h DC axial fans atio m or Series 600 J 60 x 60 x 32 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. s n – Mass: 100 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 18 10,6 14 3,5 1,3 2 150 1 612 JH 70 41,1 12 7...13,6 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 C f 612 NGMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 D 35 20,6 28 4,6 1,7 4 100 2 614 JH 70 41,1 24 14...26,4 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 16 9,4 16 3,6 1,0 2 400 3 612 NMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 618 JH 70 41,1 48 36...60 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 35 20,6 28 4,6 1,4 4 100 4 x x 23 13,5 18 3,8 1,7 2 900 5 Fan types with streamer and integrated guard grille. ma 612 NGNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 - 41 24,1 35 5,0 2,4 5 100 6 NEW 614 J/2HHP 82 48,3 24 18...30 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 / i x 23 13,5 18 3,8 1,2 2 900 5 NEW 618 J/2HHP 82 48,3 48 38...58 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 ax 612 NNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 m 41 24,1 35 5,0 1,5 5 100 6 C A 23 13,5 18 3,8 1,7 2 900 5 612 NGNV 12 8...12,6 -20...+65 70 000 / 40 000 142 500 41 24,1 35 5,0 2,4 5 100 6 Rear view of types 614 J/2HHP and 618 J/2HHP s n a al f xi a C A s n a al f g u 5[Pa]50 [in HO]2 2 centrif 500 2 AC 450 1,75 400 350 1,5 300 1,25 es 250 1 1 sori s 200 0,75 cce 150 A 100 0,5 50 0,25 0 10 20 30 40 [CFM] 10 20 30 40 50 60 70 [m3/h] es v ati nt e NNGG TT PPWWMM AA HHPP 33 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 34 44 DC axial fans 3 max. m /h Series 700 F 70 x 70 x 15 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24 to AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 53 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours 712 F/2L-005* 28 16,5 12 8...13,8 25 4,7 0,6 3 300 -20...+70 60 000 / 30 000 120 000 1 /2 8452 GL 32 18,8 12 8...15 14 3,3 0,4 1 700 -20...75 80 000 / 35 000 160 000 1 712 F/2M-006* 36 21,2 12 8...13,8 32 5,0 1,1 4 300 -20...+70 60 000 / 30 000 120 000 2 /2 8452 GM 58 34,1 12 8...15 32 4,7 1,3 3 100 -20...75 80 000 / 35 000 160 000 2 712 F 44 25,9 12 8...13,8 38 5,3 1,7 5 300 -20...+70 60 000 / 30 000 120 000 3 /2 8452 GN 68 40,0 12 8...15 36 5,0 1,8 3 600 -20...70 70 000 / 35 000 140 000 3 714 F 44 25,9 24 18...28 38 5,3 1,5 5 300 -20...+70 60 000 / 30 000 120 000 3 *Version with 3-pole Molex plug housing 22-01-2035 8452 /2 GHP 75 44,1 12 10,8...13,2 38 5,3 2,5 4 000 -20...70 70 000 / 35 000 140 000 4 Molex Contacts 08-50-0113 8452 /2 GHHP 83 48,8 12 10,8...13,2 42 5,5 3,5 4 400 -20...60 65 000 / 40 000 130 000 5 NEW 8452 /2 H4P 117 68,8 12 8...15 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 NEW 8454 /2 H4P 117 68,8 24 20,0...26,4 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 Pa60 [in HO]2 3 50 0,20 40 0,15 2 30 0,10 20 1 10 0,05 0 4 8 12 16 20 24 CFM (cid:127) 10 20 30 40 m³/h 34 NNGG HHPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 35 n max. 117 m3/h DC axial fans atio m or Series 8450 80 x 80 x 25 mm nf I Highlights: – Highly stable characteristic curve for high air flow at high back pressure. – Motor with very low structure-borne noise properties. s n a – Innovative impeller with winglets for low noise. al f – Extremely quiet Sintec sleeve bearing / ball bearing. xi a – Models with PWM control and open collector speed signal. C D General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. s n – Connection via single strands AWG 24, TR 64. Bared and tin-plated. a – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. al f g – Mass: 105 g. ntrifu e s c Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard (T)Service life Lmax10ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials specialsDC Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours s - n a 712 F/2L-005* 28 16,5 12 8...13,8 25 4,7 0,6 3 300 -20...+70 60 000 / 30 000 120 000 1 /2 8452 GL 32 18,8 12 8...15 14 3,3 0,4 1 700 -20...75 80 000 / 35 000 160 000 1 C f D 712 F/2M-006* 36 21,2 12 8...13,8 32 5,0 1,1 4 300 -20...+70 60 000 / 30 000 120 000 2 /2 8452 GM 58 34,1 12 8...15 32 4,7 1,3 3 100 -20...75 80 000 / 35 000 160 000 2 712 F 44 25,9 12 8...13,8 38 5,3 1,7 5 300 -20...+70 60 000 / 30 000 120 000 3 /2 8452 GN 68 40,0 12 8...15 36 5,0 1,8 3 600 -20...70 70 000 / 35 000 140 000 3 714 F 44 25,9 24 18...28 38 5,3 1,5 5 300 -20...+70 60 000 / 30 000 120 000 3 x x a Models with 25 kHz PWM control and speed signal to 4-wire specification (see P. 121). m - 8452 /2 GHP 75 44,1 12 10,8...13,2 38 5,3 2,5 4 000 -20...70 70 000 / 35 000 140 000 4 / i x 8452 /2 GHHP 83 48,8 12 10,8...13,2 42 5,5 3,5 4 400 -20...60 65 000 / 40 000 130 000 5 x a m C A Models with 1-30 kHz PWM control and speed signal. NEW 8452 /2 H4P 117 68,8 12 8...15 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 NEW 8454 /2 H4P 117 68,8 24 20,0...26,4 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 s n a al f xi a C A s n a al f g u [Pa] [in HO]2 6 centrif C 100 0,4 A 0,35 75 0,3 0,25 5 ories 50 0,2 4 ss 0,15 23 Acce 25 0,1 0,05 1 0 10 20 30 40 50 60 [CFM] 20 40 60 80 100 [m3/h] es v ati nt e NNGG TT II PPWWMM AA HHPP 35 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 36 79 DC axial fans 3 max. m /h Series 8400 N 80 x 80 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Some models suitable for use at high ambient temperatures up to 85 °C. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 95 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/112 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 8412 NGLE 33 19,4 12 8...15 12 3,5 0,5 1 500 -20...+85 80 000 / 27 500 160 000 1 /2 20 11,8 < 10 < 3 0,9 900 1 8412 NGLV 12 10...14 -20...+70 80 000 / 40 000 160 000 8412 NLE 33 19,4 12 8...15 17 3,7 0,3 1 500 -20...+85 80 000 / 27 500 160 000 1 33 19,4 12 3,5 1,1 1 500 2 8412 NGMLE 45 26,5 12 8...15 19 3,9 0,9 2 050 -20...+80 80 000 / 32 500 160 000 2 27 15,9 < 10 3,0 1,1 1 200 3 8412 NMLE 45 26,5 12 8...15 21 4,0 0,6 2 050 -20...+85 80 000 / 27 500 160 000 2 8412 NGMLV 12 8...14 -20...+70 80 000 / 40 000 160 000 /37 45 26,6 19 3,9 1,5 2 050 4 8412 NGME 58 34,1 12 8...15 26 4,3 1,4 2 600 -20...+75 80 000 / 35 000 160 000 3 /2 35 20,6 < 13 3,5 1,4 1 600 5 8412 NME 58 34,1 12 8...15 27 4,4 1,0 2 600 -20...+75 80 000 / 35 000 160 000 3 8412 NGMI 12 8...14 -20...+70 80 000 / 35 000 125 000 58 34,1 26 4,3 2,0 2 600 6 8412 NG 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8412 N 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8412 NH 79 46,5 12 8...13,2 37 5,0 2,2 3 600 -20...+70 70 000 / 35 000 140 000 5 /2/12 8412 NH-217 79 46,5 12 8...15 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 8414 NGL 33 19,4 24 18...28 12 3,5 0,7 1 500 -20...+70 80 000 / 40 000 160 000 1 /2 8414 NL 33 19,4 24 18...28 17 3,7 0,7 1 500 -20...+70 80 000 / 40 000 160 000 1 8414 NGML 45 26,5 24 18...28 19 3,9 1,1 2 050 -20...+70 80 000 / 40 000 160 000 2 8414 NML 45 26,5 24 18...28 21 4,0 1,1 2 050 -20...+70 80 000 / 40 000 160 000 2 8414 NGM 58 34,1 24 18...28 26 4,3 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 /2 8414 NM 58 34,1 24 18...28 27 4,4 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 8414 NG 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8414 N 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8414 NH 79 46,5 24 18...26 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 /2 8414 NH-221 79 46,5 24 18...28 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 8418 N 69 40,6 48 36...56 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 Pa [in HO]2 5 40 0,15 4 30 0,10 3 20 10 0,05 2 1 0 8 16 24 32 40 CFM (cid:127) 10 20 30 40 50 60 m³/h 36 NNGG TT II PPWWMM AA HHPP IIPP55¤44

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 37 n max. 58 m3/h DC axial fans atio m or Series 8400 N VARIOFAN 80 x 80 x 25 mm nf I Highlights: – Open loop speed control by means of (external or internal) temperature sensor. – Automatic speed adjustment according to cooling requirements. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. s n – Mass: 95 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/112 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 s - n a 8412 NGLE 33 19,4 12 8...15 12 3,5 0,5 1 500 -20...+85 80 000 / 27 500 160 000 1 /2 30°C 20 11,8 < 10 < 3 0,9 900 1 C f 8412 NGLV 12 10...14 -20...+70 80 000 / 40 000 160 000 D 8412 NLE 33 19,4 12 8...15 17 3,7 0,3 1 500 -20...+85 80 000 / 27 500 160 000 1 50°C 33 19,4 12 3,5 1,1 1 500 2 8412 NGMLE 45 26,5 12 8...15 19 3,9 0,9 2 050 -20...+80 80 000 / 32 500 160 000 2 30°C 27 15,9 < 10 3,0 1,1 1 200 3 8412 NMLE 45 26,5 12 8...15 21 4,0 0,6 2 050 -20...+85 80 000 / 27 500 160 000 2 8412 NGMLV 12 8...14 -20...+70 80 000 / 40 000 160 000 /37 50°C 45 26,6 19 3,9 1,5 2 050 4 x x 8412 NGME 58 34,1 12 8...15 26 4,3 1,4 2 600 -20...+75 80 000 / 35 000 160 000 3 /2 ma 8412 NME 58 34,1 12 8...15 27 4,4 1,0 2 600 -20...+75 80 000 / 35 000 160 000 3 30°C 8412 NGMI 35 20,6 12 8...14 < 13 3,5 1,4 1 600 -20...+70 80 000 / 35 000 125 000 5 / i- 50°C 58 34,1 26 4,3 2,0 2 600 6 x 8412 NG 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 x a m 8412 N 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 C A 8412 NH 79 46,5 12 8...13,2 37 5,0 2,2 3 600 -20...+70 70 000 / 35 000 140 000 5 /2/12 88441124 NNGHL-217 7393 4169,,54 1224 81.8...1..528 3172 53,,05 20,,47 31 650000 --2200......++7700 7800 000000 // 3450 000000 114600 000000 51 /2 Pa [in HO]2 2 8412NGLV Pa [in HO]2 4 8412NGMLV Pa25 [in HO]2 6 88441122NNGGMMVI 888444111444 NNNLGMMLL 344355 122966,,,455 222444 111888.........222888 112791 334,,,790 011,,,711 122 500055000 ---222000.........+++777000 888000 000000000 /// 444000 000000000 111666000 000000000 122 7,55 0,030,02 1105 0,060,04 1250 0,080,06 axial fans 8414 NGM 58 34,1 24 18...28 26 4,3 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 /2 1 10 0,04 AC 2,5 0,01 5 0,02 3 8414 NM 58 34,1 24 18...28 27 4,4 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 5 0,02 5 8414 NG 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 30°C 50°C 30°C 50°C 30°C 50°C 8414 N 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 (cid:127) 0 4 10 8 2102 16 30 20 mCF³M/h (cid:127) 0 510 1020 15 30 20 4025 mCF³M/h (cid:127) 0 510 1020 15 30 20 4025 5030 mCF³M/h ns a 8414 NH 79 46,5 24 18...26 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 /2 al f g 8414 NH-221 79 46,5 24 18...28 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 u 8418 N 69 40,6 48 36...56 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 V-Types I-Types entrif c C A + NTC- Airflow TSeemnspoerrature NTC TemperatureSensor s e ori s s e c The temperature sensor for control- Ac ling the motor speed is not included Temperature sensor (NTC-resistor) in delivery. for controlling the motor speed is Temperature sensor LZ 370 see positioned directly in the air flow. accessories. s e v ati nt e NNGG TT II HHPP 37 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 38 80 DC axial fans 3 max. m /h Series 8300 80 x 80 x 32 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 170 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 8312 L 32 18,8 12 6...15 24 4,0 1,2 2 000 -20...+75 80 000 / 32 500 160 000 1 8212 JN 132 77,7 12 7...13,8 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8312 M 48 28,3 12 6...15 34 5,0 2,2 3 000 -20...+75 70 000 / 27 500 140 000 2 8212 JH3 190 111,8 12 6...13,8 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8312 54 31,8 12 6...15 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 8212 JH4 222 130,7 12 6...13,8 71 7,8 39 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8312 HL 67 39,4 12 6...15 43 5,8 4,0 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8214 JN 132 77,7 24 18...26,4 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8312 H 80 47,1 12 6...12,6 48 6,2 6,5 5 000 -20...+60 55 000 / 35 000 110 000 5 8214 JH3 190 111,8 24 12...27,6 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8314 L 32 18,8 24 12...31,5 24 4,0 1,0 2 000 -20...+75 80 000 / 32 500 160 000 1 8214 JH4 222 130,7 24 12...27,6 71 7,8 38 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 M 48 28,3 24 12...31,5 34 5,0 2,3 3 000 -20...+75 70 000 / 27 500 140 000 2 8218 JN 132 77,7 48 36...53 55 6,6 11 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8314 54 31,8 24 12...31,5 36 5,2 2,7 3 300 -20...+75 70 000 / 27 500 140 000 3 /2 8218 JH3 190 111,8 48 20...58 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8314 HL 67 39,4 24 12...31,5 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8218 JH4 222 130,7 48 20...58 71 7,8 36 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 H 80 47,1 24 12...28 48 6,2 6,0 5 000 -20...+75 55 000 / 22 500 100 000 5 /2/19 8318 54 31,8 48 36...56 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 /2/17 8318 HL 67 39,4 48 36...56 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 8318 H 80 47,1 48 36...56 48 6,2 5,8 5 000 -20...+65 55 000 / 30 000 100 000 5 /17 Rotor protrusion max. 0,4 mm. 1Pa20 [in HO]2 5 100 0,4 4 80 0,3 60 3 0,2 40 2 20 0,1 1 0 8 16 24 32 40 CFM (cid:127) 10 20 30 40 50 60 m³/h 38 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 39 n max. 222 m3/h DC axial fans atio m or Series 8200 J 80 x 80 x 38 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. s n a – Optional Vario-Pro: Highly adaptable software configuration of the fan enables al f a tailor-made solution to the specific requirements of your applications. xi a C D General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Connection via single strands AWG 24 (H3 and H4: AWG 22), TR 64. s n Bared and tin-plated. a – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. al f g – Mass: 160 g (H3 and H4: 200 g). ntrifu e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 8312 L 32 18,8 12 6...15 24 4,0 1,2 2 000 -20...+75 80 000 / 32 500 160 000 1 8212 JN 132 77,7 12 7...13,8 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 C f D 8312 M 48 28,3 12 6...15 34 5,0 2,2 3 000 -20...+75 70 000 / 27 500 140 000 2 8212 JH3 190 111,8 12 6...13,8 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8312 54 31,8 12 6...15 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 8212 JH4 222 130,7 12 6...13,8 71 7,8 39 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8312 HL 67 39,4 12 6...15 43 5,8 4,0 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8214 JN 132 77,7 24 18...26,4 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 x x 8312 H 80 47,1 12 6...12,6 48 6,2 6,5 5 000 -20...+60 55 000 / 35 000 110 000 5 8214 JH3 190 111,8 24 12...27,6 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 ma - 8314 L 32 18,8 24 12...31,5 24 4,0 1,0 2 000 -20...+75 80 000 / 32 500 160 000 1 8214 JH4 222 130,7 24 12...27,6 71 7,8 38 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 / i x x 8314 M 48 28,3 24 12...31,5 34 5,0 2,3 3 000 -20...+75 70 000 / 27 500 140 000 2 a 8218 JN 132 77,7 48 36...53 55 6,6 11 8400 -20...+70 62 500 / 32 500 130 000 1 /2 m 8314 54 31,8 24 12...31,5 36 5,2 2,7 3 300 -20...+75 70 000 / 27 500 140 000 3 /2 8218 JH3 190 111,8 48 20...58 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 AC 8314 HL 67 39,4 24 12...31,5 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8218 JH4 222 130,7 48 20...58 71 7,8 36 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 H 80 47,1 24 12...28 48 6,2 6,0 5 000 -20...+75 55 000 / 22 500 100 000 5 /2/19 8318 54 31,8 48 36...56 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 /2/17 8200 JH3 and JH4 also as standard with PWM control input and speed signal. s Speed control range from 2000 RPM up to maximum nominal speed. Stationary at 0 % PWM, n 8318 HL 67 39,4 48 36...56 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 maximum speed at sensor break. al fa 8318 H 80 47,1 48 36...56 48 6,2 5,8 5 000 -20...+65 55 000 / 30 000 100 000 5 /17 xi a C A s n a al f g u ntrif e c 6Pa00 [in HO]2 3 AC 500 2,0 2 400 1,6 ories 300 1,2 1 ess c c 200 0,8 A 100 0,4 0 25 50 75 100 125 CFM (cid:127) 50 100 150 200 m³/h s e v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 39 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 40 102 DC axial fans 3 max. m /h Series 3400 N 92 x 92 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Some models suitable for use at high ambient temperatures up to 85 °C. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 100 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 3412 NGLE 61 35,9 12 8...15 23 4,0 1,1 1 950 -20...+80 80 000 / 30 000 160 000 1 44 25,9 14 3,5 1,5 1 400 1 3412 NLE 61 35,9 12 8...15 23 4,0 0,8 1 950 -20...+85 80 000 / 27 500 160 000 1 3412 NGMV 12 8...14 -20...+70 75 000 / 37 500 142 500 72 42,4 28 4,3 2,0 2 300 2 3412 NGME 72 42,4 12 8...15 28 4,3 1,6 2 300 -20...+75 75 000 / 32 500 150 000 2 3412 NME 72 42,4 12 8...15 28 4,3 1,1 2 300 -20...+75 75 000 / 32 500 150 000 2 /2 50 29,4 16 3,7 1,6 1 600 3 3412 NG 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGV 12 8...12,6 -20...+70 75 000 / 37 500 142 500 /37 84 49,4 32 4,7 2,5 2 700 4 3412 N 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 3412 NH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 /39 3412 NGHH 102 60,0 12 8...13,2 39 5,1 3,2 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 3412 NHH 102 60,0 12 8...13,2 39 5,1 2,9 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 3412 NHH-379 102 60,0 12 8...15 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 3414 NGL 61 35,9 24 18...28 23 4,0 1,4 1 950 -20...+70 80 000 / 40 000 160 000 1 3414 NL 61 35,9 24 18...28 23 4,0 1,4 1 950 -20...+70 80 000 / 40 000 160 000 1 3414 NGM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 3414 NM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 3414 NG 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 3414 N 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3414 NGH 94 55,3 24 18...26 36 5,0 3,0 3 000 -20...+70 70 000 / 35 000 140 000 4 /2 3414 NH 94 55,3 24 18...26 36 5,0 3,0 3 000 -20...+70 70 000 / 35 000 140 000 4 3414 NGHH 102 60,0 24 18...26 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 /2 3414 NGHH-389 102 60,0 24 18...28 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 3414 NHH 102 60,0 24 18...26 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 /39 3414 NHH-386 102 60,0 24 18...28 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 3418 N 84 49,4 48 36...56 32 4,7 2,4 2 700 -20...+70 70 000 / 35 000 140 000 3 Other 48 VDC models on request. Pa [in HO]2 5 40 0,15 4 30 3 0,10 2 20 1 10 0,05 0 10 20 30 40 50 CFM (cid:127) 20 40 60 80 m³/h 40 NNGG TT II PPWWMM AA HHPP IIPP55¤44

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 41 n max. 84 m3/h DC axial fans atio m or Series 3400 N VARIOFAN 92 x 92 x 25 mm nf I Highlights: – Open loop speed control by means of external or internal temperature sensor. – Automatic speed adjustment according to cooling requirements. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. s n – Mass: 100 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard (T)Service life Lmax10ebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 s - n a 3412 NGLE 61 35,9 12 8...15 23 4,0 1,1 1 950 -20...+80 80 000 / 30 000 160 000 1 30°C 44 25,9 14 3,5 1,5 1 400 1 C f 3412 NLE 61 35,9 12 8...15 23 4,0 0,8 1 950 -20...+85 80 000 / 27 500 160 000 1 3412 NGMV 12 8...14 -20...+70 75 000 / 37 500 142 500 D 50°C 72 42,4 28 4,3 2,0 2 300 2 3412 NGME 72 42,4 12 8...15 28 4,3 1,6 2 300 -20...+75 75 000 / 32 500 150 000 2 3412 NME 72 42,4 12 8...15 28 4,3 1,1 2 300 -20...+75 75 000 / 32 500 150 000 2 /2 30°C 50 29,4 16 3,7 1,6 1 600 3 3412 NG 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGV 12 8...12,6 -20...+70 75 000 / 37 500 142 500 /37 50°C 84 49,4 32 4,7 2,5 2 700 4 x 3412 N 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 x a 3412 NGH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 m - 3412 NH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 /39 / i 3412 NGHH 102 60,0 12 8...13,2 39 5,1 3,2 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 xx 3412 NHH 102 60,0 12 8...13,2 39 5,1 2,9 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 ma 33441124 NNHGHL-379 10621 6305,,09 1224 81.8...1..528 3293 54,,10 21,,74 31 295500 --2200......++7700 7800 000000 // 3450 000000 114600 000000 51 Pa [in HO]2 3412NGMV AC 33441144 NNLGM 6712 3452,,94 2244 1188......2288 2238 44,,03 11,,48 12 935000 --2200......++7700 8705 000000 // 4307 050000 116500 000000 12 20 0,08 2 + 3414 NM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 NTC 3414 NG 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 15 0,06 TemperatureSensor ans 3414 N 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 al f 33441144 NNGHH 9944 5555,,33 2244 1188......2266 3366 55,,00 33,,00 33 000000 --2200......++7700 7700 000000 // 3355 000000 114400 000000 44 /2 10 0,04 Tmhoet otre msppeeerda tiusr en oste innscolur dfeodr cino ndterolilvlienrgy .the C axi 3414 NGHH 102 60,0 24 18...26 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 /2 Temperature sensor LZ 370 see accessories. A 1 3414 NGHH-389 102 60,0 24 18...28 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 5 0,02 3414 NHH 102 60,0 24 18...26 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 /39 3414 NHH-386 102 60,0 24 18...28 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 30°C 50°C s 3418 N 84 49,4 48 36...56 32 4,7 2,4 2 700 -20...+70 70 000 / 35 000 140 000 3 0 8 16 24 32 40 CFM n (cid:127) a 10 20 30 40 50 60 m³/h al f g u ntrif e c Pa [in HO]2 4 3412NGV AC 25 20 0,08 s e 15 0,06 sori s e 10 0,04 3 Acc 5 0,02 30°C 50°C 0 8 16 24 32 40 CFM (cid:127) 10 20 30 40 50 60 70 m³/h s e v ati nt e NNGG TT II HHPP 41 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 42 107 3 DC axial fans max. m /h Series 3300 92 x 92 x 32 mm Highlights: – Ball bearings and sleeve bearings available. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 190 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 3312 L 56 33,0 12 6...15 29 4,5 1,4 2 150 -20...+75 80 000 / 35 000 147 500 1 3212 JN 130 76,5 12 7...13,8 51 6,1 7,5 6 000 -20 ...+70 70 000 / 35 000 140 000 1 /2 3312 GM 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH 146 86,0 12 7...15 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3312 M 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH3 237 139,5 12 6...13,8 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3312 80 47,1 12 6...15 37 5,2 2,4 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3212 JH4 280 164,8 12 6...13,8 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 /2 3312-177 93 54,7 12 6...15 43 5,7 3,5 3 500 -20...+75 65 000 / 27 500 122 500 5 3214 JN 130 76,5 24 11...28 51 6,1 8,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3314 G 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 3214 JH 146 86,0 24 11...30 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3314 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 /17 3214 JH3 237 139,5 24 12...27,6 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3314-140 85 50,0 24 12...28 40 5,4 3,0 3 200 -20...+75 70 000 / 30 000 135 000 4 3214 JH4 280 164,8 24 12...27,6 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 3314 H 107 63,0 24 12...28 47 6,0 5,3 4 000 -20...+75 57 500 / 25 000 112 500 6 /2 3218 JN 130 76,5 48 36...56 51 6,1 7,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3318 80 47,1 48 36...56 37 5,2 2,7 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3218 JH 146 86,0 48 36...53 55 6,4 9,5 6 800 -20 ...+70 70 000 / 35 000 140 000 2 3318 H 107 63,0 48 36...56 47 6,0 4,3 4 000 -20...+60 57 500 / 35 000 112 500 6 /2/17 3218 JH3 237 139,5 48 20...58,0 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3218 JH4 280 164,8 48 20...58,0 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 Rotor protrusion max. 0,4 mm. Pa70 [in HO]2 6 5 60 0,25 4 50 0,20 3 40 0,15 2 30 20 0,10 1 10 0,05 0 10 20 30 40 50 60 CFM (cid:127) 20 40 60 80 100 m³/h 42 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 43 n max. 280 m3/h DC axial fans atio m or Series 3200 J 92 x 92 x 38 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. s n a – Optional Vario-Pro: Highly adaptable software configuration of the fan enables al f a tailor-made solution to the specific requirements of your applications. xi a C D General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Connection via single strands AWG 24 (H3 and H4: AWG 22), TR 64. s n Bared and tin-plated. a – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. al f g – Mass: 240 g (H3 and H4: 280 g). ntrifu e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 3312 L 56 33,0 12 6...15 29 4,5 1,4 2 150 -20...+75 80 000 / 35 000 147 500 1 3212 JN 130 76,5 12 7...13,8 51 6,1 7,5 6 000 -20 ...+70 70 000 / 35 000 140 000 1 /2 C f D 3312 GM 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH 146 86,0 12 7...15 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3312 M 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH3 237 139,5 12 6...13,8 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3312 80 47,1 12 6...15 37 5,2 2,4 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3212 JH4 280 164,8 12 6...13,8 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 /2 x x 3312-177 93 54,7 12 6...15 43 5,7 3,5 3 500 -20...+75 65 000 / 27 500 122 500 5 3214 JN 130 76,5 24 11...28 51 6,1 8,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 ma - 3314 G 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 3214 JH 146 86,0 24 11...30 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 / i x x 3314 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 /17 3214 JH3 237 139,5 24 12...27,6 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 a m 3314-140 85 50,0 24 12...28 40 5,4 3,0 3 200 -20...+75 70 000 / 30 000 135 000 4 3214 JH4 280 164,8 24 12...27,6 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 AC 3314 H 107 63,0 24 12...28 47 6,0 5,3 4 000 -20...+75 57 500 / 25 000 112 500 6 /2 3218 JN 130 76,5 48 36...56 51 6,1 7,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3318 80 47,1 48 36...56 37 5,2 2,7 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3218 JH 146 86,0 48 36...53 55 6,4 9,5 6 800 -20 ...+70 70 000 / 35 000 140 000 2 3318 H 107 63,0 48 36...56 47 6,0 4,3 4 000 -20...+60 57 500 / 35 000 112 500 6 /2/17 3218 JH3 237 139,5 48 20...58,0 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 s n 3218 JH4 280 164,8 48 20...58,0 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 al fa xi a 3200 JH3 and JH4 also as standard with PWM control input and speed signal. C Speed control range from 2000 RPM up to maximum nominal speed. Stationary at 0 % PWM, A maximum speed at sensor break. s 67Pa0000 [in HO]2,42 4 ugal fan 500 2,0 3 ntrif e Pa [in HO]2 340000 1,21,6 AC c 200 0,8 300 1,2 100 0,4 2 200 0,8 1 (cid:127) 0 2550 50100 75150100 200125 251050 mCF³M/h sories s e c c A 100 0,4 0 20 40 60 80 100 CFM (cid:127) 50 100 150 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 43 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 44 170 DC axial fans 3 max. m /h Series 4400 F 119 x 119 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Open loop speed control available on request. – Alarm and speed signals available on request. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 175 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 4412 FGL 94 55,3 12 7...14 26 3,9 1,3 1 600 -20...+75 80 000 / 35 000 157 500 1 /2/39 4412 FNH 225 132,4 12 7...13,2 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /2 4412 FGML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 /2 4414 FNN 200 117,7 24 14...28 52 6,5 8,5 4 850 -20...+70 60 000 / 30 000 120 000 1 /2 4412 FML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 4414 FNH 225 132,4 24 18...26,4 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /39 4412 FGM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /12/39 4418 FNH 225 132,4 48 36...53 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 4412 FM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4412 FG 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 4412 F 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 FL 94 55,3 24 18...28 26 3,9 1,0 1 600 -20...+75 80 000 / 35 000 157 500 1 /2 4414 FM 140 82,4 24 12...28 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4414 FG 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 F 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/39 4418 FG 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 4418 F 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/12 Available on request: Fan housing with moulded-in spacers. For mounting over both flanges. Pa [in HO]2 4 50 40 3 0,15 30 2 0,10 20 1 10 0,05 0 15 30 45 60 75 90 CFM (cid:127) 25 50 75 100 125 m³/h 44 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 45 n max. 225 m3/h DC axial fans atio m or Series 4400 FN 119 x 119 x 25 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. s n a – Optional Vario-Pro: Highly adaptable software configuration of the fan enables al f a tailor-made solution to the specific requirements of your applications. xi a C D General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. s n – Connection via single strands AWG 22, TR 64. Bared and tin-plated. a – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. al f g – Mass: 240 g. ntrifu e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 s - n a 4412 FGL 94 55,3 12 7...14 26 3,9 1,3 1 600 -20...+75 80 000 / 35 000 157 500 1 /2/39 4412 FNH 225 132,4 12 7...13,2 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /2 C f D 4412 FGML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 /2 4414 FNN 200 117,7 24 14...28 52 6,5 8,5 4 850 -20...+70 60 000 / 30 000 120 000 1 /2 4412 FML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 4414 FNH 225 132,4 24 18...26,4 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /39 4412 FGM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /12/39 x 4418 FNH 225 132,4 48 36...53 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 x 4412 FM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 ma - 4412 FG 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 / i x 4412 F 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 x a m 4414 FL 94 55,3 24 18...28 26 3,9 1,0 1 600 -20...+75 80 000 / 35 000 157 500 1 /2 AC 4414 FM 140 82,4 24 12...28 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4414 FG 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 F 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/39 s n 4418 FG 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 al fa 4418 F 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/12 xi a C A s n a al f g u ntrif e c 1Pa75 O][in H2 2 AC 150 0,6 1 125 0,5 s e 100 0,4 sori s 75 0,3 cce A 50 0,2 25 0,1 0 20 40 60 80 100 120 CFM (cid:127) 50 100 150 200 m³/h es v ati nt e NNGG TT II PPWWMM AA HHPP 45 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 46 204 DC axial fans 3 max. m /h Series 4300 119 x 119 x 32 mm Highlights: – Ball bearings and sleeve bearings available. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 220 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 114 4312 GL 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 65 38,2 25 3,9 1,1 1 100 1 4312 MT 12 8...15 -20...+65 70 000 / 40 000 142 500 /17 4312 L 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 138 81,2 39 5,3 3,0 2 300 2 4312 GM 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 85 50,0 29 4,2 2,4 1 400 3 4312 M 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 /12 4312 T 12 8...13,2 -20...+65 65 000 / 35 000 132 500 /17 170 100,1 45 5,8 5,5 2 800 4 4312 G 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 85 50,0 29 4,2 1,6 1 400 3 4312 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 /2/19 4314 T 24 18...32 -20...+65 65 000 / 35 000 132 500 /17 170 100,1 45 5,8 4,8 2 800 4 4312-179 204 120,1 12 6...13,2 51 6,4 8,5 3 400 -20...+75 47 500 / 20 000 90 000 5 61 35,9 21 — 2,6 1 000 5 4314 L 95 55,9 24 12...28 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 4318 V 48 40...53 -20...+65 65 000 / 35 000 132 500 /17 170 100,0 45 5,8 5,4 2 800 6 4314 M 140 82,4 24 12...28 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 4314 G 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 4314 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/12 4314-147 180 105,9 24 12...28 47 6,1 5,8 3 000 -20...+75 57 500 / 25 000 112 500 4 4314-180 204 120,1 24 12...26,5 51 6,4 9,5 3 400 -20...+75 45 000 / 20 000 90 000 5 4318 M 140 82,4 48 36...56 39 5,3 3,5 2 300 -20...+75 70 000 / 30 000 135 000 2 4318 170 100,1 48 36...53 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/17 Rotor protrusion max. 0,4 mm. Pa [in HO]2 5 80 0,3 4 60 3 0,2 40 2 20 0,1 1 0 15 30 45 60 75 90 CFM (cid:127) 25 50 75 100 125 150 m³/h 46 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 47 n max. 170 m3/h DC axial fans atio m or Series 4300 119 x 119 x 32 mm nf I Highlights: – Open loop speed control by means of external or internal temperature sensor. – Automatic speed adjustment according to cooling requirements. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. s n – Mass: 220 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 114 s - n a 4312 GL 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 25°C 65 38,2 25 3,9 1,1 1 100 1 C f 4312 MT 12 8...15 -20...+65 70 000 / 40 000 142 500 /17 D 4312 L 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 50°C 138 81,2 39 5,3 3,0 2 300 2 4312 GM 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 25°C 85 50,0 29 4,2 2,4 1 400 3 4312 M 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 /12 4312 T 12 8...13,2 -20...+65 65 000 / 35 000 132 500 /17 50°C 170 100,1 45 5,8 5,5 2 800 4 x x 4312 G 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 ma 4312 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 /2/19 30°C 4314 T 85 50,0 24 18...32 29 4,2 1,6 1 400 -20...+65 65 000 / 35 000 132 500 3 /17 / i- 50°C 170 100,1 45 5,8 4,8 2 800 4 x 4312-179 204 120,1 12 6...13,2 51 6,4 8,5 3 400 -20...+75 47 500 / 20 000 90 000 5 x a m 4314 L 95 55,9 24 12...28 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 25°C 4318 V 61 35,9 48 40...53 21 — 2,6 1 000 -20...+65 65 000 / 35 000 132 500 5 /17 AC 50°C 170 100,0 45 5,8 5,4 2 800 6 4314 M 140 82,4 24 12...28 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 4314 G 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 4314 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/12 Pa [in HO]2 2 4312MV Pa60 [in HO]2 4 44331124TV Pa60 [in HO]2 6 4318V s 44331144--114870 128004 110250,,91 2244 1122......2286,5 4571 66,,14 59,,85 33 040000 --2200......++7755 5475 500000 // 2250 000000 11920 500000 45 40 0,15 50 0,20 50 0,20 al fan 4318 M 140 82,4 48 36...56 39 5,3 3,5 2 300 -20...+75 70 000 / 30 000 135 000 2 3200 0,10 4300 0,15 4300 0,15 AC axi 4318 170 100,1 48 36...53 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/17 20 0,10 20 0,10 10 0,05 1 10 0,05 3 10 0,05 5 25°C/ 25°C 50°C 30°C 50°C 25°C 50°C ns (cid:127) 0 1200 2040 306040 8050 10600 70 mCF³M/h (cid:127) 0 2155 5300 7455 10600 12755 90mCF³M/h (cid:127) 0 2155 5300 7455 10600 12755 90mCF³M/h al fa g u Rotor protrusion max. 0.4 mm. ntrif e c C + A NTC TemperatureSensor s e The temperature sensor for controlling the ori s motor speed is not included in delivery. s e Temperature sensor LZ 370 see accessories. cc A s e v ati nt e NNGG TT II PPWWMM AA HHPP 47 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 48 285 DC axial fans 3 max. m /h Series 4400 119 x 119 x 38 mm Highlights: – Innovative impeller with winglets for low noise. – Control inputs, alarm and speed signals available on request. – High-speed version with 5000 rpm, standard models available with /2 and PWM. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 270 g. Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst standard Service life L(T)10maxebm-papst standard Life expectancyL∆(40 °C) see P. 1510 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 4412 L 150 88,3 12 7...14 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4182 NGX 160 94,2 12 7...15 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 4412 M 184 108,3 12 7...14 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4182 NX 180 105,9 12 7...15 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/12 4412 N 205 120,7 12 7...14 46 5,6 5,5 3 650 -20...+70 62 500 / 30 000 120 000 3 /2 4182 NXH 237 139,5 12 7...14 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 4412 H 240 141,3 12 7...14 50 6,0 8,9 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4184 NGX 160 94,2 24 12...30 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 4412 /2 HHP 285 167,7 12 7...14,5 55 6,4 13,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4184 NXM 160 94,2 24 12...30 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 4414 L 150 88,3 24 18...28 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4184 NX 180 105,9 24 12...29 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/17 4414 M 184 108,3 24 18...28 42 5,3 4,0 3 300 -20...+70 65 000 / 32 500 130 000 2 4184 NXH 237 139,5 24 12...25 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 /2 4414 N 205 120,7 24 18...28 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4188 NGX 160 94,2 48 36...56 44 5,3 3,8 2 800 -10...+75 85 000 / 37 500 167 500 1 4414 H 240 141,3 24 18...28 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4188 NXM 160 94,2 48 36...56 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 /12 4414 HH 285 164,8 24 16...28 55 6,4 14,0 5 000 -20...+70 50 000 / 25 000 100 000 5 4414 /2 HHP 285 167,7 24 18...28 55 6,4 12,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4418 L 150 88,3 48 36...60 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4418 M 184 108,3 48 36...60 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4418 N 205 120,7 48 36...60 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4418 H 240 141,3 48 36...60 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4418 /2 HHP 285 167,7 48 36...60 55 6,4 13,5 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 1Pa75 [in HO]2 5 150 0,6 125 0,5 Pa [in HO]2 10705 0,40,3 125 4 50 0,2 100 0,4 25 0,1 3 0 20 40 60 80 100 120 140 CFM 75 0,3 2 (cid:127) 50 100 150 200 250 m³/h 50 0,2 1 25 0,1 0 25 50 75 100 125 CFM (cid:127) 50 100 150 200 m³/h 48 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 49 n max. 237 m3/h DC axial fans atio m or Series 4100 N 119 x 119 x 38 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. s n a – Optional Vario-Pro: Highly adaptable software configuration of the fan enables al f a tailor-made solution to the specific requirements of your applications. xi a General characteristics: C D – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. s n – Electrical connection with flat plugs, 2.8 x 0.5 mm. Optionally with strands. a – Air intake over struts. Direction of rotation clockwise, seen on rotor. al f g – Mass: 390 g. ntrifu e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 s - n a 4412 L 150 88,3 12 7...14 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4182 NGX 160 94,2 12 7...15 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 C f D 4412 M 184 108,3 12 7...14 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4182 NX 180 105,9 12 7...15 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/12 4412 N 205 120,7 12 7...14 46 5,6 5,5 3 650 -20...+70 62 500 / 30 000 120 000 3 /2 4182 NXH 237 139,5 12 7...14 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 4412 H 240 141,3 12 7...14 50 6,0 8,9 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4184 NGX 160 94,2 24 12...30 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 x x 4412 /2 HHP 285 167,7 12 7...14,5 55 6,4 13,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4184 NXM 160 94,2 24 12...30 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 ma - 4414 L 150 88,3 24 18...28 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4184 NX 180 105,9 24 12...29 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/17 / i x x 4414 M 184 108,3 24 18...28 42 5,3 4,0 3 300 -20...+70 65 000 / 32 500 130 000 2 4184 NXH 237 139,5 24 12...25 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 /2 a m 4414 N 205 120,7 24 18...28 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4188 NGX 160 94,2 48 36...56 44 5,3 3,8 2 800 -10...+75 85 000 / 37 500 167 500 1 AC 4414 H 240 141,3 24 18...28 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4188 NXM 160 94,2 48 36...56 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 /12 4414 HH 285 164,8 24 16...28 55 6,4 14,0 5 000 -20...+70 50 000 / 25 000 100 000 5 4414 /2 HHP 285 167,7 24 18...28 55 6,4 12,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 s n 4418 L 150 88,3 48 36...60 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 al fa 4418 M 184 108,3 48 36...60 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 xi a 4418 N 205 120,7 48 36...60 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 C A 4418 H 240 141,3 48 36...60 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4418 /2 HHP 285 167,7 48 36...60 55 6,4 13,5 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 s n a al f g u ntrif e c 1Pa40 [in HO]2 3 AC 120 0,5 100 0,4 2 es 80 0,3 ssori 60 1 ce 0,2 Ac 40 20 0,1 0 20 40 60 80 100 120 CFM (cid:127) 40 80 120 160 200 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 49 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 50 440 DC axial fans 3 max. m /h Series 4100 N High Performance 119 x 119 x 38 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, UL1007, TR 64, bared and tin-plated – Air intake over struts. Direction of rotation clockwise, seen on rotor. – Mass: 390 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 4112 NHH 260 152,9 12 9...15 60 6,8 13,3 5 000 -20...+65 70 000 / 55 000 147 500 1 4114 N/2H7P 500 294,2 24 16...30 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4112 NH3 310 182,4 12 9...15 65 7,2 21,6 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4114 N/2H8P 570 335,5 24 16...30 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4112 NH4 355 208,9 12 9...14 67 7,4 32,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 N/2H7P 500 294,2 48 36...60* 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4114 NHH 260 152,9 24 16...30 60 6,8 12,4 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 N/2H8P 570 335,5 48 36...60* 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4114 NH3 310 182,4 24 16...30 65 7,2 19,5 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4114 NH4 355 208,9 24 16...30 67 7,4 30,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4114 NH5 390 229,5 24 16...30 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 4114 NH6 440 259,0 24 16...30 73 8,1 65,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 4118 NHH 260 152,9 48 36...60 60 6,8 12,0 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 NH3 310 182,4 48 36...60 65 7,2 20,0 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4118 NH4 355 208,9 48 36...60 67 7,4 28,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 NH5 390 229,5 48 36...60 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 4118 NH6 440 259,0 48 36...60 73 8,1 62,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 6Pa00 [in HO]2 5 500 2,0 400 1,6 4 300 1,2 3Pa50 [in HO]2 200 0,8 100 0,4 300 1,2 3 0 50 100 150 200 250 CFM 250 1,0 2 (cid:127) 100 200 300 400 m³/h 200 0,8 150 0,6 1 100 0,4 50 0,2 0 50 100 150 200 250 CFM (cid:127) 100 200 300 400 m³/h 50 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 51 n max. 570 m3/h DC axial fans atio m or Series 4100 N High Performance 119 x 119 x 38 mm nf I Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. s n a – Available as standard with PWM control input and speed signal, additional inputs and outputs on al f request. 3-phase fan drive with high degree of running smoothness. xi a General characteristics: C D – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 20, sensor and control leads AWG 22, UL1007, TR 64. s n Bared and tin-plated. a – Air intake over struts. Direction of rotation clockwise, seen on rotor. al f g – Mass: 425 g. ntrifu e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 4112 NHH 260 152,9 12 9...15 60 6,8 13,3 5 000 -20...+65 70 000 / 55 000 147 500 1 4114 N/2H7P 500 294,2 24 16...30 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 C f D 4112 NH3 310 182,4 12 9...15 65 7,2 21,6 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4114 N/2H8P 570 335,5 24 16...30 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4112 NH4 355 208,9 12 9...14 67 7,4 32,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 N/2H7P 500 294,2 48 36...60* 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4114 NHH 260 152,9 24 16...30 60 6,8 12,4 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 N/2H8P 570 335,5 48 36...60* 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 x x a 4114 NH3 310 182,4 24 16...30 65 7,2 19,5 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 *36...72 VDC on request. -m 4114 NH4 355 208,9 24 16...30 67 7,4 30,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 / i x 4114 NH5 390 229,5 24 16...30 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 Speed control range from 500 RPM up to maximum nominal speed. Stationary at 0 % PWM, ax m maximum speed at sensor break. 4114 NH6 440 259,0 24 16...30 73 8,1 65,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 To attain the specified service life, an external capacitor must be wired between the plus and minus strands. AC Please note the wiring suggestion on page 22. 4118 NHH 260 152,9 48 36...60 60 6,8 12,0 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 NH3 310 182,4 48 36...60 65 7,2 20,0 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4118 NH4 355 208,9 48 36...60 67 7,4 28,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 s n 4118 NH5 390 229,5 48 36...60 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 al fa 4118 NH6 440 259,0 48 36...60 73 8,1 62,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 xi a C A s n a al f g u ntrif e c 12Pa00 [in HO]2 2 AC 1000 4,0 1 800 3,2 ories 600 2,4 ess c c 400 1,6 A 200 0,8 0 50 100 150 200 250 300 CFM (cid:127) 100 200 300 400 500 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 51 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 52 275 DC diagonal fans 3 max. m /h Series DV 4100 119 x 119 x 38 mm Highlights: – Diagonal compact fan with low noise and high pressure saddle. – Very rigid compression curve for high air flow at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 375 g (with aluminium housing : 455 g). s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 DV 4112 N 280 164,7 12 9...15 61 6,9 21,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NM 187 110,1 12 7...14,5 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 5212 NN 216 127,1 12 7...14 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 DV 4114 N 280 164,7 24 16...30 61 6,9 20,5 6 000 -20...+65 70 000 / 40 000 142 500 1 /2 5212 NH 252 148,3 12 7...14 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 DV 4118 N 280 164,7 48 36...60 61 6,9 20,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NHH* 340 200,0 12 9...15 58 6,6 19,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 5214 NM 187 110,1 24 12...28 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 5214 NN 216 127,1 24 12...28 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 /2 5214 NH 252 148,3 24 12...28 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 /2 5214 NHH* 340 200,0 24 16...30 58 6,6 17,5 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 5218 NM 187 110,1 48 40...56 43 5,3 5,0 2 750 -20...+75 62 500 / 27 500 122 500 1 5218 NN 216 127,1 48 40...56 46 5,6 6,5 3 150 -20...+65 57 500 / 32 500 112 500 2 5218 NH 252 148,3 48 40...56 51 6,0 10,0 3 650 -20...+55 45 000 / 32 500 90 000 3 5218 NHH* 340 200,0 48 36...60 58 6,6 18,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 3Pa00 [in HO]2 1 250 1,0 200 0,8 150 0,6 100 0,4 50 0,2 0 30 60 90 120 150 CFM (cid:127) 50 100 150 200 250 m³/h 52 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 53 n max. 338 m3/h DC axial fans atio m or Series 5200 N 127 x 127 x 38 mm nf I Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. s n a al f General characteristics: xi a – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. C D – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. s n – Mass: 310 g. a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a DV 4112 N 280 164,7 12 9...15 61 6,9 21,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NM 187 110,1 12 7...14,5 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 C f D 5212 NN 216 127,1 12 7...14 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 DV 4114 N 280 164,7 24 16...30 61 6,9 20,5 6 000 -20...+65 70 000 / 40 000 142 500 1 /2 5212 NH 252 148,3 12 7...14 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 DV 4118 N 280 164,7 48 36...60 61 6,9 20,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NHH* 340 200,0 12 9...15 58 6,6 19,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 x x a 5214 NM 187 110,1 24 12...28 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 m - 5214 NN 216 127,1 24 12...28 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 /2 / i x x 5214 NH 252 148,3 24 12...28 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 /2 a m 5214 NHH* 340 200,0 24 16...30 58 6,6 17,5 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 AC 5218 NM 187 110,1 48 40...56 43 5,3 5,0 2 750 -20...+75 62 500 / 27 500 122 500 1 5218 NN 216 127,1 48 40...56 46 5,6 6,5 3 150 -20...+65 57 500 / 32 500 112 500 2 5218 NH 252 148,3 48 40...56 51 6,0 10,0 3 650 -20...+55 45 000 / 32 500 90 000 3 s n 5218 NHH* 340 200,0 48 36...60 58 6,6 18,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 al fa xi *Models NHH:Fan housing a C with moulded-in spacers. A s n a al f g u ntrif e c Pa [in HO]2 AC 200 0,8 4 150 0,6 es ori s s 100 0,4 3 ce c 2 A 50 0,2 1 0 40 80 120 160 200 CFM (cid:127) 100 200 300 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 53 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 54 324 DC diagonal fans 3 max. m /h Series DV 5200 127 x 127 x 38 mm Highlights: – Diagonal fan with lower operating noise at high pressures. – Very rigid compression curve for high air flow at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – DV 5214 /2HP with PWM control input and speed signal, additional inputs and outputs on request. General characteristics: – Material: housing of fibreglass-reinforced plastic, optionally of aluminium. Metal flange. Impeller of fibreglass-reinforced plastic PA; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 415 g (with metal housing: 490 g). s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-112 DV 5212 N 270 158,9 12 9...15 56 6,4 21,0 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5112 N 250 147,1 12 6...15 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5214 N 270 158,9 24 16...30 56 6,4 20,4 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5114 N 250 147,1 24 12...30 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5218 N 270 158,9 48 36...60 56 6,4 18,5 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5118 N 250 147,1 48 24...60 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2/12 Model comes standard with speed signal and PWM control input. Other versions by request. DV 5214 /2HP 320 188,2 24 16...30 62 7,2 38,5 6 000 -20...+65 62 500 / 35 000 125 000* 2 Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. Pa [in HO]2 2 400 1,6 300 1,2 1 200 0,8 100 0,4 0 25 50 75 100 125 150 175 CFM (cid:127) 50 100 150 200 250 m³/h 54 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 55 n max. 250 m3/h DC axial fans atio m or Series 5100 N 135 x 135 x 38 mm nf I General characteristics: – Material for aluminium housing and impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. s n a – Fully integrated electronic commutation. al f – Protected against reverse polarity and locking. xi a – Connection via single strands AWG 22, TR 64, bared and tin-plated. C D – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 650 g. s n a al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-112 s - n a DV 5212 N 270 158,9 12 9...15 56 6,4 21,0 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5112 N 250 147,1 12 6...15 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 C f D DV 5214 N 270 158,9 24 16...30 56 6,4 20,4 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5114 N 250 147,1 24 12...30 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5218 N 270 158,9 48 36...60 56 6,4 18,5 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5118 N 250 147,1 48 24...60 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2/12 x x a m - DV 5214 /2HP 320 188,2 24 16...30 62 7,2 38,5 6 000 -20...+65 62 500 / 35 000 125 000* 2 / i x x a m C A s n a al f xi a C A s n a al f g u ntrif e c Pa [in HO]2 1 AC 80 0,3 60 s e 0,2 sori 40 es c c A 20 0,1 0 25 50 75 100 125 CFM (cid:127) 50 100 150 200 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 55 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 56 338 DC axial fans 3 max. m /h Series 5300 140 x 140 x 51 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air intake over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 900 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 NEW 5314 /2HP 340 200 24 16...28 64 7,2 28,4 5 000 -20...+65 77 500/40 000 160 000 1 5312 /2 TDHP 410 241,3 12 8...16 70 7,7 43 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 NEW 5318 /2HP 340 200 48 36...72 64 7,2 27 5 000 -20...+65 77 500/40 000 160 000 1 5314 /2 TDHP 410 241,3 24 16...36 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 5314 /2 TDHHP 490 288,4 24 16...36 75 8,1 67 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 Speed control range from 700 RPM up to maximum nominal speed. Stationary at 0 % PWM, 5318 /2 TDHP 410 241,3 48 36...72 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 maximum speed at sensor break. 5318 /2 TDHHP 490 288,4 48 36...72 75 8,1 66 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 5318 /2 TDH4P 670 394,3 48 36...72 79 8,8 149 9 200 -20...+65 57 500 / 32 500 115 000 3 /2 3Pa00 [in HO]2 1 250 1,0 200 0,8 150 0,6 100 0,4 50 0,2 0 25 50 75 100 125 150 175 CFM (cid:127) 50 100 150 200 250 m³/h 56 NNGG TT II PPWWMM AA HHPP IIPP55¤44

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 57 n max. 670 m3/h DC axial fans atio m or Series 5300 TD 140 x 140 x 51 mm nf I Highlights: – 3-phase fan drive with high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. s n –– LSotawn doapredr awtiinthg PnWoiMse cleovnetrl oal ti nhpiguht abnadc ks ppereesds suirgen.al, additional inputs and outputs on xial fa request. C a General characteristics: D – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. s – Connection via single strands AWG 20, TR 64. Bared and tin-plated. an – Air intake over struts. Direction of rotation counter-clockwise, seen on rotor. al f g – Mass: 900 g. u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 s - n a 5314 /2HP 340 200 24 16...28 64 7,2 28,4 5 000 -20...+65 77 500/40 000 160 000 1 5312 /2 TDHP 410 241,3 12 8...16 70 7,7 43 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 C f D 5318 /2HP 340 200 48 36...72 64 7,2 27 5 000 -20...+65 77 500/40 000 160 000 1 5314 /2 TDHP 410 241,3 24 16...36 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 5314 /2 TDHHP 490 288,4 24 16...36 75 8,1 67 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 x 5318 /2 TDHP 410 241,3 48 36...72 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 x a m 5318 /2 TDHHP 490 288,4 48 36...72 75 8,1 66 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 - / i 5318 /2 TDH4P 670 394,3 48 36...72 79 8,8 149 9 200 -20...+65 57 500 / 32 500 115 000 3 /2 x x a m Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, AC maximum speed at sensor break. s n a al f xi a C A s n a al f g u ntrif e c 12Pa00 [in HO]2 3 AC 1000 4,0 800 3,2 2 ories s 600 2,4 es 1 cc 400 1,6 A 200 0,8 0 50 100 150 200 250 300 350 400 CFM (cid:127) 100 200 300 400 500 600 m³/h es v ati nt e NNGG TT II PPWWMM AA HHPP 57 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 58 420 DC axial fans 3 max. m /h Series 7100 N 150 Ø x 38 mm General characteristics: – Material: Aluminium housing and impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. – Air intake over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 620 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 7112 N 360 211,9 12 6...15 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7212 N 360 211,9 12 6...15 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /2 7114 N 360 211,9 24 12...30 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7214 N 360 211,9 24 12...30 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /12/17/19 7114 NH 420 247,2 24 12...26,5 59 7,0 19,0 3 350 -25...+72 75 000 / 35 000 147 500 2 7218 N 360 211,9 48 24...60 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 7118 N 360 211,9 48 24...60 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 Strand fastened using cable tie; cable tie protrudes 1 mm. 1Pa75 [in HO]2 2 150 0,6 125 0,5 1 100 0,4 75 0,3 50 0,2 25 0,1 0 40 80 120 160 200 CFM (cid:127) 100 200 300 m³/h 58 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 59 n max. 360 m3/h DC axial fans atio m or Series 7200 N 150 Ø x 55 mm nf I Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. s n a al f General characteristics: xi a – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug C D for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. s n – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. a – Mass: 725 g. al f g u ntrif e Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingsBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials pecialsDC c s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 s - n a 7112 N 360 211,9 12 6...15 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7212 N 360 211,9 12 6...15 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /2 C f D 7114 N 360 211,9 24 12...30 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7214 N 360 211,9 24 12...30 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /12/17/19 7114 NH 420 247,2 24 12...26,5 59 7,0 19,0 3 350 -25...+72 75 000 / 35 000 147 500 2 7218 N 360 211,9 48 24...60 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 x 7118 N 360 211,9 48 24...60 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 x a m - / i x x a m C A s n a al f xi a C A s n a al f g u ntrif e c Pa [in HO]2 1 AC 125 100 0,4 s e 75 0,3 sori s e 50 0,2 Acc 25 0,1 0 40 80 120 160 200 CFM (cid:127) 100 200 300 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 59 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 60 350 DC axial fans 3 max. m /h Series 6100 N 172 x 160 x 52 mm Highlights: – Compact, lightweight plastic housing. – VARIOFAN models available with external temperature sensor. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Open loop speed control, sensor and alarm signal available on request. General characteristics: – Material: housing and impeller of fibreglass-reinforced PA. – Fully integrated electronic commutation. – Protected against locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 610 g. s Nominal data Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearingBall bearings Power input Nominal speed Temperature range Service life L(40 °C)10 ebm-papst Standard Service life L(T)10maxebm-papst Standard LLife expectancy∆10(40 °C) see P. 15 Curve Specials Nominal data Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours NEW 6112 NM 350 206 12 8...15 49 5,9 11 2 850 -20...+70 80 000/37 500 157 500 1 NEW 6314 /2MP 395 232,4 24 16...30 51 6,0 13 3 600 -20...+75 82 500/32 500 165 000 1 NEW 6314 /2NP 470 276,5 24 16...30 56 6,5 23 4 400 -20...+70 80 000/40 000 160 000 2 NEW 6114 NM 350 206 24 12...32 49 5,9 11 2 850 -20...+70 80 000/37 500 157 500 1 NEW 6314 /2HP 545 320,6 24 16...30 58 6,9 31 5 000 -20...+65 77 500/42 500 155 000 3 NEW 6318 /2HP 545 320,6 48 36...72 58 6,9 32 5 000 -20...+65 77 500/42 500 155 000 3 1Pa50 [in HO]2 1 125 0,5 100 0,4 75 0,3 50 0,2 25 0,1 0 40 80 120 160 200 CFM (cid:127) 100 200 300 m³/h 60 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 61 n max. 545 m3/h DC axial fans atio m or Series 6300 172 Ø x 51 mm nf I Highlights: – Veryrigidcompressioncurveforhighairflowathighbackpressure. – Lowoperatingnoiselevelathighbackpressure. s n – AvailableasstandardwithPWMcontrolinputandspeedsignal. fa Additionalinputsandoutputsonrequest. xial a C Generalcharacteristics: D – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwith groundinglugforscrewM4x8(Torx). – Protectedagainstreversepolarityandlocking. s – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. an f – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. al g – Mass:910g. u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours s- n a NEW 6314/2MP 395 232,4 24 16...30 51 6,0 13 3600 -20...+75 82500/32500 165000 1 f C D NEW 6314/2NP 470 276,5 24 16...30 56 6,5 23 4400 -20...+70 80000/40000 160000 2 NEW 6314/2HP 545 320,6 24 16...30 58 6,9 31 5000 -20...+65 77500/42500 155000 3 NEW 6318/2HP 545 320,6 48 36...72 58 6,9 32 5000 -20...+65 77500/42500 155000 3 x x a m - Speedcontrolrangefrom700RPMuptomaximumnominalspeed.Stationaryat0%PWM, i / maximumspeedatsensorbreak. x x a m C A s n a f al xi a C A s n a f al g u [Pa] [inHO]2 centrif 500 C 2 3 A 1,75 400 1,5 2 300 1,25 ories 1 1 s s 200 0,75 Acce 100 0,5 0,25 0 50 100 150 200 250 300 [CFM] 100 200 300 400 500 [m3/h] es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 61 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 62 950 DC axial fans 3 max. m /h Series 6300TD 172 Ø x 51 mm Highlights: – 3-phasefandrivehighdegreeofrunningsmoothness. – Veryrigidcompressioncurveforhighairflowathighbackpressure. – Lowoperatingnoiselevelathighbackpressure. – StandardwithPWMcontrolinputandspeedsignal,additionalinputsandoutputson request. Generalcharacteristics: – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx). – Protectedagainstreversepolarityandlocking. – ConnectionviasinglestrandsAWG20,TR64.Baredandtin-plated. – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. – Mass:910g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P.110 6312/2TDHP 600 353,1 12 8...16 60 7,3 40 5500 -20...+70 75000/37500 150000 1 /2 NEW 6314/2TDHP-298 600 353,1 24 16...28 60 7,3 42 5500 -20...+65 75000/42500 150000 1 NEW 6314/2TDHP 600 353,1 24 16...36 60 7,3 40 5500 -20...+70 75000/37500 150000 1 /2 6314/2TDHHP 710 417,9 24 16...36 69 7,9 67 7000 -20...+70 62500/30000 120000 2 /2 NEW 6318/2TDHP-299 600 353,1 48 36...56 60 7,3 42 5500 -20...+65 75000/42500 150000 1 NEW 6318/2TDHP 600 353,1 48 36...72 60 7,3 40 5500 -20...+70 75000/37500 150000 1 /2 6318/2TDHHP 710 417,9 48 36...72 69 7,9 67 7000 -20...+70 62500/30000 120000 2 /2 6318/2TDH4P 950 559,1 48 36...72 75 8,4 150 9200 -20...+65 52500/30000 107500 3 /2 Speedcontrolrangefrom1000RPMuptomaximumnominalspeed.Stationaryat0%PWM, maximumspeedatsensorbreak. Pa HO]2 [in 3 1000 800 3,2 2 600 2,4 1 400 1,6 200 0,8 0 100 200 300 400 500 600 CFM 200 400 600 800 1000 m³/h 62 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 63 n max. 950 m3/h DC axial fans atio m or Series 6300TD 172 x 160 x 51 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryrigidcompressioncurveforhighairflowathighbackpressure. s n – Lowoperatingnoiselevelathighbackpressure. fa – StandardwithPWMcontrolinputandspeedsignal,additionalinputsandoutputson xial request. a C Generalcharacteristics: D – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx). – Protectedagainstreversepolarityandlocking. s n – ConnectionviasinglestrandsAWG20,TR64.Baredandtin-plated. a f – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. al g – Mass:910g. u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard Lifeexpectancy∆L10(40°C) Curve Specials pecialsDCc s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours s- n a NEW 6314/2TDHHP-015 710 415,0 24 16...36 69 7,9 67 7000 -20...+70 62500/30000 120000 1 f C D NEW 6318/2TDH4P-007 950 560,0 48 36...72 75 8,4 150 9200 -20...+65 52500/30000 107500 2 *Vorläufig Speedcontrolrangefrom1000RPMuptomaximumnominalspeed.Stationaryat0%PWM, x x maximumspeedatsensorbreak. a m - i / x x a m C A s n a f al xi a C A s n a f al g u ntrif e c Pa HO]2 AC [in 2 1000 800 3,2 s 600 2,4 1 sorie s e c 400 1,6 Ac 200 0,8 0 100 200 300 400 500 600 CFM 200 400 600 800 1000 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 63 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 64 540 DC diagonal fans 3 max. m /h Series DV 6200 172 Ø x 51 mm Highlights: – Diagonalcompactfanwithlownoiseandhighpressuresaddle. – Veryrigidcompressioncurveforhighairflowathighbackpressure. Generalcharacteristics: – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx).48Vversionincl.screws. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. – Mass:820g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P.110/112 DV6224 540 317,8 24 16...28 63 7,1 40,0 4300 -20...+75 90000/40000 180000 1 /2/12 DV6248 540 317,8 48 28...60 63 7,1 40,0 4300 -20...+75 90000/40000 180000 1 Pa HO]2 1 350 [in 300 1,2 250 1,0 200 0,8 150 0,6 100 0,4 50 0,2 0 50 100 150 200 250 300 CFM 100 200 300 400 500 600 m³/h 64 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 65 n max. 700 m3/h DC diagonal fans atio m or Series DV 6200TDTURBOFAN 172 Ø x 51 mm nf I Highlights: – Diagonalcompactfanwithlownoiseandhighpressuresaddle. – 3-phasefandrivewithhighdegreeofrunningsmoothness. s n – Veryrigidcompressioncurveforhighairflowathighbackpressure. fa – Controlinputs,alarmandspeedsignalsavailableonrequest. xial a C Generalcharacteristics: D – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx).48Vversionincl.screws. – Fullyintegratedelectroniccommutation. s – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. an f – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. al g – Mass:820g. u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. s- n a DV6224TD 700 421,0 24 16...36 69 7,8 89,0 5500 -20...+60 65000/40000 130000 2 f C D DV6248TD 700 421,0 48 40...55 69 7,8 89,0 5500 -20...+60 65000/40000 130000 2 min 100 58,9 29 — 2,0 800 1 P.110-116 DV6224TD... 24 16...36 -20...+60 65000 130000 and120, x max 700 421,0 69 7,8 89,0 5500 2 121,123 ax m - mmainx DV6248TD... 170000 45281,,90 48 40...55* 2699 —7,8 829,0,0 5850000 -20...+60 65000/40000 130000 12 P.1a1n21d101,1-212013,6 xx/i a m *Fanwithextendedvoltagerangeavailableonrequest. C A ModelsDV6224TD...andDV6248TD...areavailableincustomer-specific,custom-developedvariantsonly. Thedataspecifiedherearetechnicallyfeasiblebenchmarkvalues.Thefanscanbespeciallyadaptedtoyourapplicationwithsignaloutputs andcontrolinputs. s Fordetailsofthetechnicalpossibilities,refertothechaptersonthesensorsignal,alarmsignalandcontrolinputsbeginningonpage107. an f al xi a C A s n a f al g u ntrif e c Pa HO]2 2 AC 600 [in 500 2,0 s 400 1,6 orie s 300 1,2 es c c 200 0,8 A 100 0,4 1 nmin nmax 0 100 200 300 400 CFM 100 200 300 400 500 600 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 65 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 66 480 DC axial fans 3 max. m /h Series 6400 172 x 150 x 51 mm Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenables atailor-madesolutiontothespecificrequirementsofyourapplications. Generalcharacteristics: – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx).48Vversionincl.screws. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Electricalconnectionwithflatplugs3x0.5mm. – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. – Mass:760g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P.110/112 6412M 350 206,0 12 8...15 52 6,0 12,0 2850 -20...+72 80000/37500 157500 1 6424M 350 206,0 24 12...32 52 6,0 12,0 2850 -20...+72 80000/37500 157500 1 6424 410 241,3 24 12...28 57 6,4 18,0 3400 -20...+72 75000/35000 125000 2 /2 6424H 480 282,5 24 12...28 63 7,1 26,0 4000 -20...+55* 70000/50000 110000 3 /12 6448 410 241,3 48 28...60 57 6,4 17,0 3400 -20...+72 75000/35000 125000 2 6448H* 480 282,5 48 28...60 63 7,1 26,0 4000 -20...+55** 70000/50000 110000 3 *Leads310mm. **72°Cuponrequest. Pa HO]2 3 175 [in 150 0,60,6 2 125 0,5 100 0,4 1 75 0,3 50 0,2 25 0,1 0 50 100 150 200 250 CFM 100 200 300 400 m³/h 66 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 67 n max. 900 m3/h DC axial fans atio m or Series 6400TDTURBOFAN 172 x 150 x 51 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryrigidcompressioncurveforhighairflowathighbackpressure. s n – Controlinputs,alarmandspeedsignalsavailableonrequest. fa – Optionallyavailablewithreversiblespeed. xial Generalcharacteristics: a C – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug D forscrewM4x8(Torx).48Vversionincl.screws. – Fullyintegratedelectroniccommutation. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. s n – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor.Directionof a f rotationreversible. al g – Mass:760g. ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. s- n a min 90 53,0 18 — 2,0 800 1 Cf 6424TD... 24 16...28 -20...+60 70000/45000 110000 D max 600 353,1 65 7,4 50,0 5100 2 min 90 53,0 18 — 2,0 800 1 P.110-116 6448TD... 48 40...55* -20...+60 70000/45000 110000 and120, max 600 353,1 65 7,4 50,0 5100 2 121,123 xx a m min 6448TDHH... 90 53,0 48 36...72 18 — 2,0 800 -20...+60 70000/45000 110000 1 P.a1n1d01-2101,6 /i- max 900 529,7 78 8,6 163,0 7500 3 121,123 x x a m *Fanwithextendedvoltagerangeavailableonrequest. C A ModelsDV6224TD...andDV6248TD...areavailableincustomer-specific,custom-developedvariantsonly. Thedataspecifiedherearetechnicallyfeasiblebenchmarkvalues.Thefanscanbespeciallyadaptedtoyourapplicationwithsignaloutputs andcontrolinputs. s Fordetailsofthetechnicalpossibilities,refertothechaptersonthesensorsignal,alarmsignalandcontrolinputsbeginningonpage108. n a f al xi a C A s n a f al g u ntrif e c 80Pa0 [inHO]2 3 AC 700 2,8 600 2,4 s 450000 1,62,0 2 essorie c 300 1,2 Ac 200 0,8 100 0,4 1 nmin nmax 0 100 200 300 400 500 CFM 150 300 450 600 750 900 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 67 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 68 530 DC diagonal fans 3 max. m /h Series DV6400 172 x 160 x 51 mm Highlights: – Diagonalcompactfanwithlownoiseandhighpressuresaddle. – Veryrigidcompressioncurveforhighairflowathighbackpressure. – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenables atailor-madesolutiontothespecificrequirementsofyourapplications. Generalcharacteristics: – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx).48Vversionincl.screws. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. – Mass:820g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P.112 DV6424 530 311,9 24 16...28 65 7,3 40,0 4300 -20...+75 90000/45000 180000 1 /12 DV6448 530 311,9 48 28...60 65 7,3 40,0 4300 -20...+75 90000/45000 180000 1 /12 Pa HO]2 1 350 [in 300 1,2 250 1,0 200 0,8 150 0,6 100 0,4 50 0,2 0 60 120 180 240 300 CFM 100 200 300 400 500 m³/h 68 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 69 n max. 680 m3/h DC diagonal fans atio m or Series DV 6400TDTURBOFAN 172 x 160 x 51 mm nf I Highlights: – Diagonalcompactfanwithlownoiseandhighpressuresaddle. – 3-phasefandrivewithhighdegreeofrunningsmoothness. s n – Veryrigidcompressioncurveforhighairflowathighbackpressure. a f – Controlinputs,plusalarmandspeedsignalsavailableonrequest. al xi – Optionallyavailablewithreversiblespeed. a C Generalcharacteristics: D – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglug forscrewM4x8(Torx).48Vversionincl.screws. – Fullyintegratedelectroniccommutation. s – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. n a f – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor.Directionof al g rotationreversible. u – Mass:820g. ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. s- n a DV6424TD 680 400,2 24 16...28 71 7,9 91,0 5500 -20...+60 65000/40000 130000 2 f C D min 100 58,9 29 — 2,0 800 1 P.110-116 DV6424TD... 24 16...28 -20...+60 65000/40000 130000 and120, max 680 400,2 71 7,9 91,0 5500 2 121,123 x min 100 58,9 29 — 2,0 800 1 P.110-116 ax DV6448TD... 48 40...55 -20...+60 65000/40000 130000 and120, m max 680 400,2 71 7,9 86,0 5500 2 121,123 - i / x x a m ModelsDV6424TD...andDV6448TD...areavailableincustomer-specific,custom-developedvariantsonly. C Thedataspecifiedherearetechnicallyfeasiblebenchmarkvalues.Thefanscanbespeciallyadaptedtoyourapplicationwithsignaloutputs A andcontrolinputs. Fordetailsofthetechnicalpossibilities,refertothechaptersonthesensorsignal,alarmsignalandcontrolinputsbeginningonpage108. s n a f al xi a C A s n a f al g u ntrif e c Pa HO]2 2 AC 600 [in 500 2,0 400 1,6 ories 300 1,2 ess c c 200 0,8 A 100 0,4 1 nmin nmax 0 100 200 300 CFM 100 200 300 400 500 600 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 69 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 70 1220 3 DC axial fans max. m /h Series 2200 FTD 220 x 200 x 51 mm Highlights: – High-performance200mmfanwithcompactoverallheight. – Lowoperatingnoiselevelathighbackpressure. – 3-phasefandrivehighdegreeofrunningsmoothnessandhighefficiency. – StandardwithspeedsignalandPWM(P)or0-10VDC/PWM(O)speedcontrol. Generalcharacteristics: – Material:aluminiumhousing,fibreglass-reinforcedPAimpeller;housingwithgroundinglugfor screwM4x8. – Electroniccommutationfullyintegrated. – Protectedagainstreversepolarityandlocking. – ConnectionviasinglestrandsAWG20,UL1007/AWG22,UL1061,baredandtin-plated. – Airexhaustoverstruts.Directionofrotationcounter-clockwise,seenonrotor. – Mass:1000g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard Lifeexpectancy∆L10(40°C) Curve Specials Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P.110 NEW 2214F/2TDHO 790 464,7 24 16...30 62 7,1 35,0 4250 -25...+75 90000/42500 180000 1 /2 NEW 2214F/2TDHHO 940 552,9 24 16...36 66 7,4 35,0 5000 -25...+70 85000/42500 170000 2 /2 NEW 2218F/2TDHO 790 464,7 48 36...57 62 7,1 48,0 4250 -25...+75 90000/42500 180000 1 /2 NEW 2218F/2TDHHO 940 552,9 48 36...72 66 7,4 48,0 5000 -25...+70 85000/42500 170000 2 /2 NEW 2218F/2TDH4P 1220 717,6 48 36...72 72 8,2 103,0 6500 -20...+65 70000/40000 140000 3 /2 Speedcontrolrangefrom1000RPMuptomaximumnominalspeed.Stationaryat0%PWM/0V, TypeO:stationaryatsensorbreak;TypeP:maximumspeedatsensorbreak. Pa O]H2 [in 3,5 3 800 3,0 2 600 2,5 2,0 400 1,5 200 1,0 1 0,5 0 0 100 200 300 400 500 600 CFM 200 400 600 800 1000 m³/h 70 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 71 n max. 1090 m3/h DC axial fans atio m or W1G 200 225 x 225 x 80 mm nf I – Material:Die-castaluminiumwallring,9sheetsteelblades.Bladesand rotorcoatedinblack. – Protectedagainstreversepolarityandlocking. s n a – Directionorairflow:“V”,exhaustoverstruts.Directionofrotationcounter-clockwise,seen f al onrotor. xi a – Typeofprotection:IP42.Insulationclass:“B”. C D – Maintenance-freeballbearings. – Controlinput0-10VDC/PWMandtachoutput. – Electricalconnectionwithterminalstrip. – Continuousoperation(S1). s n – Mass:2.1kg. a f al g u ntrif Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard Curve pecialsDCce s Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours s- n a W1G200-HH77-52 1090 641,6 24 16...28 60 — 55,0 2950 -25...+60 57000/42000 1 f C D W1G200-HH01-52 1090 641,6 48 36...57 60 — 55,0 2950 -25...+60 57000/42000 1 x x a m - i / x x a m C A n P1 LpA [RPM] [W] [dB(A)] s (cid:2) (cid:1)’ 2300 73 63 an (cid:2) (cid:6)’ 2970 77 62 f (cid:2) (cid:7)’ 3100 80 63 xial (cid:2) (cid:8)’ 2970 80 66 a (cid:2) (cid:1) 2950 55 60 AC (cid:2) (cid:6) 2890 58 60 (cid:2) (cid:7) 2800 61 61 (cid:2) (cid:8) 2780 63 64 (cid:2) (cid:9) 2270 27 55 (cid:2) (cid:10) 2230 28 54 ns (cid:2) (cid:11) 2170 29 54 fa (cid:2) (cid:12) 2130 30 57 al g u Pa HO]2 11 ntrif [in ce C 240 A 200 0,8 112600 0,6 UN UR 4' ssories 80 0,4 4 3 3' Acce 8 40 0,2 7 2 2' 6 5 1 1' 0 200 400 600 CFM 200 400 600 800 1000 m³/h es v ati nt e s 71 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 72 1245 DC diagonal module 3 max. m /h K1G 200 225 x 225 x 80 mm – Material:Housingmadeoffibreglass-reinforcedPA6plastic,sevenbladesmadeoffibre- glass-reinforcedPA6plastic.Rotorcoatedinblack – Protectedagainstreversepolarityandlocking. – Directionofairflow“V”.DirectionofrotationCW,seenonrotor. – Typeofprotection:IP20(...02);IP44(...04).Insulationclass:“B”. – Maintenance-freeballbearings. – Controlinput0-10VDC/PWMandtachoutput. – ElectricalconnectionviaconnectionlineAWG20,4xbrassleadtipscrimped. – Continuousoperation(S1). – Mass:1.7kg. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Currentdraw Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard Curve Type m3/h CFM VDC VDC A dB(A) / Watts RPM °C Hours NEW K1G200-AD65-04 1020 600,3 24 16...28 4,7 76 95 3400 -25...+60 67000/33000 1 NEW K1G200-AD31-02 1045 614,9 24 16...28 5,3 77 107 3520 -25...+70 100000/50000 2 NEW K1G200-AD49-04 1095 644,4 48 36...57 3,4 77 120 3650 -25...+60 80000/32000 3 NEW K1G200-AD37-02 1245 732,7 48 36...57 5,6 81 183 4140 -25...+70 75000/30000 4 n P1 I LwA Airperformancemeasured [RPM] [W] [A] [dB(A)] asper:ISO5801, (cid:2) (cid:1) 3400 95 4,70 76 InstallationcategoryA, (cid:2) (cid:6) 3410 116 5,61 74 withoutprotectionagainst (cid:2) (cid:7) 3410 119 5,75 74 accidentalcontact (cid:2) (cid:8) 3410 117 5,62 76 (cid:3) (cid:1) 3520 107 5,30 77 Suction-sidenoiselevels: (cid:3) (cid:6) 3520 127 6,24 75 LwAasperISO13347 Cableassignment: (cid:3) (cid:7) 3520 129 6,31 76 Red =UN (cid:3) (cid:8) 3520 126 6,18 76 Theacousticvaluesgivenare Yellow =0-10VDC (cid:4) (cid:1) 3650 120 3,40 77 onlyvalidunderthemeasur- White =Speedmonitoringoutput (cid:4) (cid:6) 3650 141 3,90 75 mentconditionslistedand Blue =GND (cid:4) (cid:7) 3650 145 3,99 76 mayvarydependingonthe (cid:4) (cid:8) 3650 141 3,88 78 installationsituation. 28 (cid:5) (cid:1) 4140 183 5,60 81 276 8 (cid:5)(cid:5) (cid:6)(cid:7) 44009600 221123 66,,4562 7799 Wdairthdasentyudpe,vthiaetisopnetcoifitchevasltuaens- -+0,5 (cid:5) (cid:8) 4110 211 6,43 80 havetobecheckedandre- viewedonceinstalledorfitted! [Pa] HO]2 [in 4 500 2,0 4 3 400 1,6 2 4 3 1 4 4 3 300 1,2 33 2 2 200 0,8 22 6 100 0,4 6 11 1 1 80++1 0 100 200 300 400 500 600 [CFM] 200 400 600 800 1000 [m3/h] 72

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 73 n max. 1640 m3/h DC diagonal module atio m or K3G 200 225 x 225 x 89 mm nf I – Material:Housingmadeoffibreglass-reinforcedPA6plastic,sevenbladesmadeoffibre- glass-reinforcedPA6plastic.Rotorcoatedinblack – Protectedagainstreversepolarityandlocking. s n a – Directionofairflow“V”.DirectionofrotationCW,seenonrotor. f al – Typeofprotection:IP20(...02);IP44(...04).Insulationclass:“B”. xi a – Maintenance-freeballbearings. C D – Controlinput0-10VDC/PWMandtachoutput. – ElectricalconnectionviaconnectionlineAWG16,4xcrimpedcore-endsleeves. – Continuousoperation(S1). – Mass:2.2kg. s n a f al g u ntrif Nominaldata Airflow Airflow Nominalvoltage Voltagerange Currentdraw Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard Curve pecialsDCce s Type m3/h CFM VDC VDC A dB(A) / Watts RPM °C Hours s- n a NEW K3G200-BDA3-04 1215 716,0 24 16...28 7,7 81 185 4060 -25...+60 55000/31000 1 f C D NEW K3G200-BDA1-02 1215 716,0 24 16...28 7,7 81 185 4060 -25...+65 60000/32000 1 NEW K3G200-BDA4-04 1550 911,0 48 36...57 7,1 86 339 5140 -25...+60 52000/32000 2 x x NEW K3G200-BDA2-02 1640 965,0 48 36...57 8,7 87 418 5480 -25...+60 40000/22000 3 a m - i / x x n P1 I LwA Airperformancemeasured ma [RPM] [W] [A] [dB(A)] asper:ISO5801, C (cid:2) (cid:1) 4060 185 7,70 81 InstallationcategoryA, A (cid:2) (cid:6) 4010 204 8,48 78 withoutprotectionagainst (cid:2) (cid:7) 4010 209 8,70 78 accidentalcontact (cid:2) (cid:8) 4020 208 8,66 79 (cid:3) (cid:1) 5140 339 7,10 86 Suction-sidenoiselevels: s (cid:3) (cid:6) 5070 373 7,78 83 LwAasperISO13347 Cableassignment: an (cid:3)(cid:3) (cid:7)(cid:8) 55006800 338850 87,,0911 8834 Theacousticvaluesgivenare RYeeldlow ==0U-N10VDC xialf (cid:4)(cid:4) (cid:1)(cid:6) 55428500 441281 88,,7707 8874 omnelyntvcaolindduitniodnesrtlihsetemdeaansdur- WBlhuiete ==SGpNeDedmonitoringoutput ACa (cid:4) (cid:7) 5190 422 8,78 83 mayvarydependingonthe 2 (cid:4) (cid:8) 5240 421 8,77 85 installationsituation. 2 88 7 6 -+ Withanydeviationtothestan- 0,5 dardsetup,thespecificvalues ns havetobecheckedandre- fa viewedonceinstalledorfitted! al g u [Pa] HO]2 3 ntrif 800 [in 2 4 ce 4 C A 700 2,8 600 2,4 33 500 2,0 1 4 s e 400 1,6 22 ori 3 s s 300 1,2 ce 2 Ac 200 0,8 100 0,4 6 1 1 1 89++1 0 200 400 600 800 [CFM] 400 800 1200 1600[m3/h] es v ati nt e s 73 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 74 1920 DC axial fans 3 max. m /h W1G 250 280 x 280 x 80 mm – Material:Die-castaluminiumwallring,7sheetsteelblades.Bladesand rotorcoatedinblack. – Protectedagainstreversepolarityandlocking. – Directionorairflow:“V”,exhaustoverstruts.Directionofrotationcounter-clockwise,seen onrotor. – Typeofprotection:IP42.Insulationclass:“B”. – Maintenance-freeballbearings. – Controlinput0-10VDC/PWMandtachoutput. – Electricalconnectionwithterminalstrip. – Continuousoperation(S1). – Mass:2.4kg. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard Curve Type m3/h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours W1G250-HH37-52 1920 1130,1 24 16...28 70 — 105,0 2750 -25...+60 57000/38000 1 W1G250-HH67-52 1920 1130,1 48 36...57 70 — 105,0 2750 -25...+60 57000/38000 1 n P1 LpA [RPM] [W] [dB(A)] (cid:2) (cid:1)’ 2920 129 71 (cid:2) (cid:6)’ 2800 132 72 (cid:2) (cid:7)’ 2680 135 71 (cid:2) (cid:8)’ 2600 139 72 (cid:2) (cid:1) 2750 105 70 (cid:2) (cid:6) 2630 110 69 (cid:2) (cid:7) 2520 111 69 (cid:2) (cid:8) 2440 114 70 (cid:2) (cid:9) 2610 73 66 (cid:2) (cid:10) 2320 75 67 (cid:2) (cid:11) 2230 78 67 (cid:2) (cid:12) 2170 80 68 Pa HO]2 12 [in 200 0,8 UR 160 0,6 UN 4' 120 4 0,4 8 3' 80 3 7 40 0,2 2 2' 6 5 1 1' 0 400 800 [CFM] 400 800 1200 1600 m³/h 74

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 75 n DC centrifugal fans atio m or nf I s n a f al xi a DCcentrifugalfanoverview 77 C D DCcentrifugalfans 79 s DCtangentialfans 105 n a f al g u ntrif e c C D s al ci e p s - s n a f C D x x a m - i / x x a m C A s n a f al xi a C A s n a f al g u ntrif e c C A s e ori s s e c c A s e v ati nt e s 75 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 76 DC fans Technical information Productline Voltagerange Ourcentrifugalproductlineincludesfansfor ManyofourDCfanscanbeoperatedonvolta- everyapplication.Whetherasfree-running gesthatareupto50%lowerand25%higher impellerswithadiameterbetween97mmand thantheirnominalvoltage(seeVoltagerangein 225mmorasassembliesinaready-to-install, thetechnicaltables).Thisenablestheairper- compacthousingwithinletnozzlewithanedge formancetobeadaptedtothecoolingrequire- lengthbetween51mmand270mm.Ofcour- mentsandallowsthenoisetobereduced,even se,allmodelsfeaturehigh-efficiency,brushless ifthefandoesnothaveacontrolinput. motortechnology. Closed-loopspeedcontrolandmonitoring Electronicprotectionagainst Closed-loopspeedcontrolandfunctionmonito- reversepolarity ringarebecomingincreasinglyimportantin ebm-papstDCfanshaveelectronicallycommu- manyapplications.ebm-papstoffersmanyfans tateddriveswithelectronicprotectionagainst inthestandarddesignwithacontrolinputand reversepolarity.Theelectronicsareconveniently opencollectorspeedsignal. locatedinthefanhub. S-Forcecentrifugal–RadiCal Productlifeexpectancy ThenewS-Forcecentrifugalfansprovidepeak AdistinctivefeatureofDCfantechnologyis performanceamongfansofthistype.Withair theconvincinglyhighproductlifeexpectancy. flowcapacityatover1500m³/handapressure Thankstotheexcellentefficiencyofthebrush- build-upofupto1000pascals,thehighestheat lessdrives,thethermalloadofthebearingsis flowsaremanageable.Inaddition,themodels reduced,thusconsiderablyincreasingthelife areextremelyefficientduetothemulti-pole, expectancyofthefans. electronicallycommutateddrivemotorsandcan beadaptedindividuallytoeveryapplication Protectionclass thankstointelligentmotorfeatures.Some DCfanswithsleeveandballbearingsarepow- modelsuseournew,highlyefficientRadiCal eredbyClassEinsulatedmotors.Allebm-papst impellers. fansconformtotherequirementsofProtection ClassIP20.FansconformingtoIP54andspe- cialprotectionclassesarealsoavailable. 76

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 77 n Centrifugal fans for DC operation o ati m or Overview of air performance nf I s n a Dimensions Series Airflow Page DCaxialf mm m3/h 10 20 30 40 50 60 708090100 200 300 400 500 6007008009001000 2000 3000 105x59x79 RV40 18...24 79 (cid:3) 51x15 RLF35 9,6 80 ans (cid:3) 76x27 RL48 22...28 81 alf 97x93,5x33 RL65 56...61 82 g u (cid:3)(cid:3) 112217xx3275 RRLLF9100N0 6440......8505 8834 entrif (cid:3) 135x38 RG90N 55 85 Cc (cid:3) 180x40 RG125N 60...137 86 D (cid:3) 220x56 RG160N 139...209 87 (cid:3) 220x56 RG160NTD 59...370 NEW 88 (cid:3) 225x85 RG190TD 630...930 NEW 89 als (cid:3) 270x99 RG220TD 1090...1280 NEW 90 eci (cid:3) 270x119 RG225TD 1040...1210 NEW 91 sp Ø 97x41 RET97TD 220 NEW 92 - s Ø 104x25 REF100 86...104 93 n a f Ø 101x52 RER101 190 94 C D Ø 120x54 RER120TD320...390 NEW 95 Ø 138x35 RER125N 74...166 96 Ø 133x91 RER133TD460...565 NEW 97 Ø 165x51 RER160N 255 98 x x Ø 165x51 RER160NTD 66...354 NEW 99 ma Ø 175x55 REF175TD 800 NEW 100 i- Ø 175x69 RER175TD 600...980 NEW 101 x/ x Ø 190x69 RER190TD 650...970 NEW 102 a m Ø 220x71 RER220TD1090...1280 NEW 103 C A Ø 225x99 RER225TD1080...1600 NEW 104 201...413x50x48 QG030 75...155 105 10 20 30 40 50 60 708090100 200 300 400 500 6007008009001000 2000 3000 m3/h s n a f al xi a C A s n a f al g u ntrif e c C A s e ori s s e c c A s e v ati nt e s 77 pre e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 78 Centrifugal fans for DC operation Overview of technically feasible designs Dimensions VDE,UL,CSASintecsleevebearSiengnss/obrallbearingsGo/No-goalAlararmmwithlimitsEpxteeerdnaltemIpnetreartnuarletesemnpsePorraWtuMrecosnetrnosloirAnnpalutoguecontrolMiulntip-uotptioncontrolinHpuutmidityproItPect>io=nIP54SaltsprayfogprotectiPoange Pleasenotethatthesespecialversionsarenotpossible Centrifugalfans forallvoltagesandspeeds,andnotinallcombinations. Series mm OPTIONAL P. RV40 105x59x79 yes – • – – – • – – • – – 79 Thespecialversionsaredesignedforspecificcusto- RLF35 51x51x15 * • – – – – – – – • – – 80 mersandprojects.Asaruletheyarenotavailableoff RL48 76x76x27 yes • • – – – – – – • – – 81 theshelfandaretiedtominimumvolumes. RL65 97x93,5x33 * • • • • • • • – • – – 82 Pleaseconsultyourcustomersupportrepresentative RL90N 121x121x37 yes / • • • • • • • – • • • 83 aboutthefeasibilityofyourspecialvariant. RLF100 127x127x25 yes • • • • • • • – • • – 84 RG90N 135x135x38 yes / • • • • • • • – • • • 85 RG125N 180x180x40 yes • • • • • • • – • • • 86 RG160N 220x220x56 yes • • • • • • • – • • • 87 NEW RG160NTD 220x220x56 yes • • • • • • • – • • • 88 NEW RG190TD 225x225x85 yes • • • • • • • • • • • 89 NEW RG220TD 270x270x99 yes • • • • • • • • • • – 90 NEW RG225TD 270x270x132 yes • • • • • • • • • • – 91 NEW RET97TD 97Øx41 * • • • • • • • – • – – 92 REF100 100Øx25 yes • • • • • • • – • • – 93 RER101 101Øx52 * • • • • • • • – • – – 94 NEW RER120TD 120Øx54 * • • • • • • • – • – – 95 RER125N 138Øx35 yes • • • • • • • – • – – 96 NEW RER133TD 133Øx91 * • • • • • • • • • – – 97 RER160N 165Øx51 yes • • • • • • • – • • • 98 NEW RER160NTD 165Øx51 yes • • • • • • • – • • • 99 NEW REF175TD 175Øx55 * • • • • • • • • • – – 100 NEW RER175TD 175Øx69 * • • • • • • • • • • • 101 NEW RER190TD 190Øx69 * • • • • • • • • • • • 102 NEW RER220TD 220Øx71 * • • • • • • • • • – – 103 NEW RER225TD 225Øx99 * • • • • • • • • • – – 104 QG030 201...413x50x48 yes • – – – – – – – • – – 105 *approvals – notyetavailable SleeveBearings appliedfor • available BallBearings Optional special versions / Information pictograms (seepage20) Onthecataloguepagesandintheoverview Thespecialversionsaredesignedforspecific onpage20,thepictogramsshownprovide customersandprojectsandarenotusually informationaboutthespecialdesignsthatare availableofftheshelf. technicallyfeasibleinthefanseries.Please notethatthesespecialversionsarenotpossi- bleforallvoltagesandspeeds,andnotinall combinations. 78

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 79 n max. 24 m3/h DC centrifugal fans atio m or Series RV 40 105 x 59 x 79 mm nf I Highlights: – Pressure-optimisedblower. – Motorwithverylowstructure-bornenoiseproperties. s n a – Forwardcurvedimpeller. f al xi a Generalcharacteristics: C D – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG26,TR64.Baredandtin-plated. a f – Mass:100g. al g u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a RV40-18/12L 18 10,6 12 9...16 4,0 2,0 3900 -20...+70 70000/35000 110000 1 f C D RV40-18/12H 24 14,1 12 9...16 5,0 4,5 4800 -20...+70 50000/25000 80000 2 x x a m - i / x x a m C A s n a f al xi a C A s n a f al g u 18Ø30 Ø31 2,3 (2x) centrif Pa HO]2 2 4,2 AC [in 125 10,5 4 100 0,4 60, 5,78 4 s 75 0,3 46,5Ø Intakeopening 40Ø 27 cessorie 50 0,2 1 2,04 Ac 4 25 0,1 18,35 36,35 12 2,51 0 3 6 9 12 15 CFM 58,85 44,9 32,4 5 10 15 20 25 m³/h es v ati nt e NNGG PPWWMM HHPP 79 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 80 9,6 DC centrifugal fans 3 max. m /h Series RLF 35 51 x 51 x 15 mm Highlights: – Noise-optimisedairoutletinscrollhousing. – Veryflatandpowerfulcentrifugalfan. – Forwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG26,TR64.Baredandtin-plated. – Mass:40g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours RLF35-8/12N 9,6 5,7 12 8...13,2 5,5 3,5 6700 -20...+70 60000/30000 120000 1 RLF35-8/14N 9,6 5,7 24 14...28 5,5 4,3 6700 -20...+70 60000/30000 120000 1 Pa HO]2 175 [in 1 150 0,6 125 0,5 100 0,4 75 0,3 50 0,2 25 0,1 0 1 2 3 4 5 6 7 CFM 2 4 6 8 10 m³/h 80 HHPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 81 n max. 28 m3/h DC centrifugal fans atio m or Series RL 48 76 x 76 x 27 mm nf I Highlights: – Pressure-optimisedblower. – Noise-optimisedairoutletinscrollhousing. s n a – Forwardcurvedimpeller. f al xi a Generalcharacteristics: C D – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG26,TR64.Baredandtin-plated. a f – Mass:75g. al g u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.110 s- n a RL48-19/12ML 22 12,9 12 8...15 5,3 2,9 3500 -20...+70 70000/35000 140000 1 f C D RL48-19/12 28 16,5 12 8...13,5 5,7 5,0 4400 -20...+70 60000/30000 120000 2 /2 RL48-19/14ML 22 12,9 24 18...28 5,3 2,9 3500 -20...+70 70000/35000 140000 1 RL48-19/14 28 16,5 24 18...26,4 5,7 5,0 4400 -20...+70 60000/30000 120000 2 /2 x x a m - i / x x a m C A s n a f al xi a C A s n a f al g u ntrif e c Pa HO]2 2 AC [in 125 100 0,4 1 es 75 0,3 sori s e c 50 0,2 Ac 25 0,1 0 3 6 9 12 15 CFM 5 10 15 20 25 m³/h es v ati nt e NNGG HHPP 81 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 82 61 DC centrifugal fans 3 max. m /h Series RL 65 97 x 93,5 x 33 mm Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. – Pressure-optimisedblower.Noise-optimisedairoutletinscrollhousing. – Forwardcurvedimpeller. – Integratedsnap-infinsforeasyassembly. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG26,TR64.Baredandtin-plated. – Mass:170g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.110 RL65-21/12 56 33,0 12 6,8…13,8 6,6 15,0 4500 -20…+70 60000/30000 120000 1 /2 RL65-21/12H 61 35,9 12 6.8...13,2 6,8 19,2 4900 -20...+55 55000/37500 105000 2 RL65-21/14 56 33,0 24 12...26,4 6,6 14,0 4500 -20…+70 60000/30000 120000 1 RL65-21/14H 61 35,9 24 12...26,4 6,8 18,0 4900 -20...+60 55000/35000 105000 2 Snap-infinsfor easyassembly Pa HO]2 [in 400 1,6 2 1 300 1,2 200 0,8 100 0,4 0 10 20 30 CFM 10 20 30 40 50 60 m³/h 82 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 83 n 55 DC centrifugal fans o max. m3/h ati m or Series RL 90 N 121 x 121 x 37 mm nf I Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. s n a – Forwardcurvedimpeller. f al xi a Generalcharacteristics: C D – Fibreglass-reinforcedplasticscrollhousingandimpeller;Housingbaseofsteelplate. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. a f – Mass:420g. al g u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL40°C)10(ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.110 s- n a RL90-18/12N 40 23,5 12 7...15 5,8 5,5 2500 -30...+75 62500/27500 112500 1 /2 f C D RL90-18/14NG 40 23,5 24 12...28 5,8 5,0 2500 -10...+75 62500/27500 112500 1 RL90-18/14N 40 23,5 24 12...28 5,8 5,0 2500 -30...+75 62500/27500 112500 1 /2 x RL90-18/18NH 55 32,4 48 40...53 6,9 15,0 3500 -30...+55 32500/22500 62500 2 x a m - i / x x a m C A s n a f al xi a C A s n a f al g 37,3++0,7 u 4560,3 3,5 2 26,5 entrif c Pa HO]2 2 AC [in 112110205705005 0,80,60,4 1 ++61++31010 97++71,40,2 2,5 57,680++104,80,2 120,6 54 ++67,40,4 cessories c 75 A 5205 0,2 100,8++0,2 4,2++0,4 12±0,5 153,05++_0,3 ++60,3 112,7++0,2 120,6 0 5 10 15 20 25 30 CFM 10 20 30 40 50 m³/h ScrewclipM4or8-32UNC.Screw-indepthmax.12.5min.9.0 es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 83 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 84 80 DC centrifugal fans 3 max. m /h Series RLF 100 127 x 127 x 25 mm Highlights: – Veryflatandpowerfulcentrifugalfan.Pressure-optimisedblower. – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. – SomemodelsavailableasstandardwithPWMcontrolinputandspeedsignal. – Backwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller.Housingbaseofgalvanisedsteel plate. – Fullyintegratedelectroniccommutation.Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Mass:320g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.110/116 RLF100-11/12 64 37,7 12 8...15 6,4 8,0 5100 -20...+75 80000/30000 150000 1 /2 RLF100-11/14 64 37,7 24 16...30 6,4 8,0 5100 -20...+75 80000/30000 150000 1 /19 RLF100-11/18 64 37,7 48 36...60 6,4 8,6 5100 -20...+75 80000/30000 150000 1 HighspeedmodelswithOpenCollectorTachoandPWMspeedcontrol. RLF100-11/12/2HP-200 80 47,1 12 10...13,2 7,5 18,6 6400 -20...+60 72500/45000 112500 2 /2 RLF100-11/18/2HP-182 80 47,1 48 43...53 7,5 17,0 6400 -20...+70 72500/35000 112500 2 /2 Pa HO]2 600 [in 2 500 2,0 400 1,6 1 300 21, 200 0,8 100 0,4 0 10 20 30 40 CFM 10 20 30 40 50 60 m³/h 84 NNGG TT II PPWWMM AA HHPP IIPP55¤44

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 85 n max. 55 m3/h DC centrifugal fans atio m or Series RG90 N 135 x 135 x 38 mm nf I Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. s n a – Backwardcurvedimpeller. f al Generalcharacteristics: xi a – Fibreglass-reinforcedplasticscrollhousingandimpeller;Housingbaseofsteelplate. C D – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. s n 48VModel:Flatplug6.3x0.8mmforprotectiveearth. a f – Mass:440g. al g u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a RG90-18/12N 55 32,4 12 7...15 5,5 6,0 2200 -30...+75 62500/27500 112500 1 f C D RG90-18/14NG 55 32,4 24 12...28 5,5 5,5 2200 -10...+75 62500/27500 112500 1 RG90-18/14N 55 32,4 24 12...28 5,5 5,5 2200 -30...+75 62500/27500 112500 1 x RG90-18/18N 55 32,4 48 36...56 5,5 5,5 2200 -30...+75 62500/27500 112500 1 x a m - i / x x a m C A s n a f al xi a C A s n a f al g u ntrif e c Pa HO]2 AC [in 100 1 80 0,3 s e 60 ori s 0,2 ces 40 c A 20 0,1 0 5 10 15 20 25 30 CFM 10 20 30 40 50 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 85 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 86 137 DC centrifugal fans 3 max. m /h Series RG 125 N 180 x 180 x 40 mm Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. – Backwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller;Housingbaseofsteelplate. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. 48VModel:Flatplug6.3x0.8mmforprotectiveearth. – Mass:730g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.110/112 RG125-19/12NM 60,0 35,3 12 7...15 4,8 2,0 1750 -30...+75 70000/30000 135000 1 RG125-19/12N 87,5 51,5 12 7...15 5,8 5,0 2550 -30...+75 62500/27500 125000 2 /2/12 RG125-19/14NM 60,0 35,3 24 12...28 4,8 2,0 1750 -30...+75 70000/30000 135000 1 RG125-19/14N 87,5 51,5 24 12...28 5,8 5,0 2550 -30...+75 62500/27500 125000 2 /2 RG125-19/18N 87,5 51,5 48 36...56 5,8 5,0 2550 -30...+75 62500/27500 125000 2 RG125-19/18NH 137 80,6 48 36...56 7,0 19,0 4000 -20...+70 55000/27500 110000 3 Pa HO]2 420 [in 3 360 300 1,2 240 180 0,8 1Pa50 [inHO]2 2 12600 0,4 125 0,5 0 20 2040 6040 80 10600 120 80 mCF³M/h 100 0,4 75 0,3 1 50 0,2 25 0,1 0 10 20 30 40 50 CFM 20 40 60 80 m³/h 86 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 87 n max. 209 m3/h DC centrifugal fans atio m or Series RG 160 N 220 x 220 x 56 mm nf I Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. s n a – Backwardcurvedimpeller. f al Generalcharacteristics: xi a – Fibreglass-reinforcedplasticscrollhousingandimpeller;Housingbaseofsteelplate. C D – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. s n – 48VModel:Flatplug6.3x0.8mmforprotectiveearth. a f – Mass:1.4kg. al g u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.112 s- n a RG160-28/12NM 139 81,1 12 7...14 5,6 7,5 1900 -20...+70 80000/40000 160000 1 f C D RG160-28/12N 209 123,0 12 7,5...14 6,6 21,0 2850 -20...+70 70000/35000 140000 2 /12 RG160-28/14NM 139 81,1 24 12...28 5,6 7,0 1900 -20...+70 80000/40000 120000 1 RG160-28/14N 209 123,0 24 12...28 6,6 20,0 2850 -20...+70 70000/35000 120000 2 x x a m RG160-28/18N 209 123,0 48 28...60 6,6 20,0 2850 -20...+70 70000/35000 120000 2 /12 - i / x x a m C A s n a f al xi a C A s n a f al g u ntrif e c 3Pa50 [inHO]2 2 AC 300 1,2 250 1,0 s e 200 0,8 1 sori s 150 0,6 cce A 100 0,4 50 0,2 0 20 40 60 80 CFM 25 50 75 100 125 150 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 87 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 88 444 DC centrifugal fans 3 max. m /h Series RG 160 NTD 220 x 220 x 56 mm Highlights: – Controlinputs,alarmandspeedsignalsavailableonrequest. – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. – Backwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller; Housingbaseofsheetsteel. – Fullyintegratedelectroniccommutation. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. 48VModel:Flatplug6.3x0.8mmforprotectiveearth. – Mass:1.4kg. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. min. 59 16,4 — 2,0 800 1 RG160-28/14NTD... 24 16...28 -20...+60 55000/27500 110000 max. 308 85,6 7,5 64,0 4200 2 RG160-28/14NTD 308 85,6 24 16...28 7,5 64,0 4200 -20...+60 55000/35000 110000 2 RG160-28/14NTDH 370 217,8 24 16...28 7,8 101,0 5000 -20...+60 50000/32500 102500 3 min. 59 16,4 — 2,0 800 1 RG160-28/18NTD... 48 38...57 -20...+70 55000/27500 110000 max. 308 85,6 7,5 59,0 4200 2 NEW RG160-28/18/2NTDHHP* 444 261,2 48 36...60 8,5 159 6000 -20...+65 40000/22500 80000 4 ModelsRG160-28/14NTD...andRG160-28/18NTD...areavailableincustomer-specific,custom-developedvariantsonly. Thedataspecifiedherearetechnicallyfeasiblebenchmarkvalues.Thefanscanbespeciallyadaptedtoyourapplicationwithsignaloutputsand controlinputs. *Thespecificservicelifeisvalidwhenanexternalcapacitoriswiredbetweentheplusandminusstrands. Pleasenotethewiringsuggestion. 14Pa00 [inHO]2 4 1200 4,8 1000 4,0 3 800 3,2 600 2,4 7Pa00 [inHO]2 2 400 1,6 200 0,8 600 2,4 0 50 100 150 200 250 CFM 500 2,0 100 200 300 400 m³/h 400 1,6 300 1,2 200 0,8 100 0,4 1 nmin nmax 0 30 60 90 120 150 CFM 50 100 150 200 250 m³/h 88 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 89 n max. 930 m3/h DC centrifugal fans atio m or Series RG 190TD 225 x 225 x 85 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness.Veryhighpressurebuild-up. – Backward-curvedRadiCalimpellerwithhighefficiency. s n a – Standardmodelsavailablewithmultifunctionalcontrolinputforanalogue,PWMandspeedsign. f al – Compactdesignwithintegratedmountingplateandoptimisedinletnozzle. xi a Generalcharacteristics: C D – Housingandimpelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignaland a f controlinputAWG22,baredandtin-plated. al g – Mass:1210g. ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a NEW RG190-39/14/2TDMLO 630 370,6 24 16...30 7,6 54 3000 -20...+60 55000/35000 110000 1 f C D NEW RG190-39/14/2TDMO 820 482,4 24 16...36 7,9 100 3900 -20...+65 52500/30000 105000 2 NEW RG190-39/18/2TDMLO 630 370,6 48 36...57 7,6 52 3000 -20...+65 55000/35000 110000 1 NEW RG190-39/18/2TDMO 820 482,4 48 36...72 7,9 100 3900 -20...+65 52500/30000 105000 2 x x a NEW RG190-39/18/2TDO 930 547,1 48 36...72 8,3 135 4400 -20...+65 40000/25000 80000 3 m - i / Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, xx a standstillifcontrolcableisinterrupted. m C A Forsuitableguard grilles,seepage176. s n a f al xi a C A s n a f al g 9[Pa]00 3,5[inHO]2 3 266-+0,5 61++ 35010++ Ccentrifu 800 A 3 700 2 600 1,5 0,5++ 1 500 2 20 es 400 1,5 1 essori 300 c c 1 A 200 100 0,5 6,0++0,3 79++1,0 0 100 200 300 400 500 [CFM] 200 400 600 800 [m3/h] es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 89 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 90 1280 DC centrifugal fans 3 max. m /h Series RG 220TD 270 x 270 x 99 mm Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness.Veryhighpressurebuild-up. – Backward-curvedimpeller. – Standardmodelsavailablewithmultifunctionalcontrolinputforanalogue,PWMandspeedsignal. – Compactdesignwithintegratedmountingplateandoptimisedinletnozzle. Generalcharacteristics: – Housingandimpelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignaland controlinputAWG22,baredandtin-plated. – Mass:1870g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RG220-44/14/2TDMO 1090 641,2 24 16...36 7,7 82 3000 -20...+55 75000/52500 150000 1 NEW RG220-44/18/2TDMO 1090 641,2 48 36...72 7,7 80 3000 -20...+55 75000/52500 150000 1 NEW RG220-44/18/2TDO 1280 752,9 48 36...72 8,0 140 3500 -20...+55 55000/40000 110000 2 Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, standstillifcontrolcableisinterrupted. Forsuitableguard grilles,seepage176. 1++ [Pa] [inHO]2 2 305-+0,5 6 35010++ 600 2,25 500 2 1 400 1,75 ++0,5 1,5 43,2 300 1,25 2 1 200 0,75 100 0,5 0,25 7,0++0,3 92++1,0 0 100 200 300 400 500 600 700 [CFM] 200 400 600 800 1000 1200 [m3/h] 90 NNGG TT II PPWWMM AA HHPP IIPP55¤44

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 91 n max. 1210 m3/h DC centrifugal fans atio m or Series RG 225TD 270 x 270 x 119 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness.Veryhighpressurebuild-up. – Backward-curvedRadiCalimpellerwithhighefficiency. s n a – Standardmodelsavailablewithmultifunctionalcontrolinputforanalogue,PWMandspeedsign. f al – Compactdesignwithintegratedmountingplateandoptimisedinletnozzle. xi a Generalcharacteristics: C D – Housingandimpelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignaland a f controlinputAWG22,baredandtin-plated. al g – Mass:1750g. ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a NEW RG225-55/14/2TDMLO 1040 611,8 24 16...36 7,3 65 2400 -20...+55 72500/52500 145000 1 f C D NEW RG225-55/18/2TDMLO 1040 611,8 48 36...72 7,3 65 2400 -20...+55 72500/52500 145000 1 NEW RG225-55/18/2TDMO 1210 711,8 48 36...72 7,9 116 2800 -20...+55 55000/40000 110000 2 x x a Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, m - standstillifcontrolcableisinterrupted. /i Thespecificservicelifeisvalidwhenanexternalcapacitoriswiredbetweentheplusandminusstrands. xx a Pleasenotethewiringsuggestion. m C A Forsuitableguard grilles,seepage176. s n a f al xi a C A s n a f al g [Pa] [inHO]2 305-+0,5 61++ 35010++ centrifu 600 C 2,25 2 A 500 2 400 1,75 1 3,20,5++ 1,5 24 es 300 1,25 sori s 1 e c 200 0,75 Ac 100 0,5 0,25 7,0++0,3 112++1,0 0 100 200 300 400 500 600 700 [CFM] 200 400 600 800 1000 1200 [m3/h] es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 91 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 92 220 DC centrifugal fans 3 max. m /h Series RET 97TD 97 Ø x 41 mm Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. – Forwardcurvedimpeller. – AvailableasstandardwithPWMcontrolinputandspeedsignal. Additionalinputsandoutputsonrequest. Generalcharacteristics: – Impellerofgalvanisedsteelplate. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Mass:430g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RET97-25/14/2TDP* 220 129 24 16...36 8,1 72 6000 -20...+60 80000/50000 160000 1 NEW RET97-25/18/2TDP 220 129 48 36...60 8,1 72 6000 -20...+60 80000/50000 160000 1 *Preliminary Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, maximumspeedatsensorbreak. Toattainthespecifiedservicelife,anexternalcapacitormustbewiredbetweentheplusandminusstrands. Pleasenotethewiringsuggestiononpage. Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: Centrifugalfanmountedonabaseplate116x116mm. R16 Ccoonvceernptlraicteto11th6exim11p6elmlerm. withanairinletofØ80mm, Airflow Airflow 1 ++ 6 m m 2 10++ 0 1 3 Pa HO]2 800 [in 1 700 3 600 2,4 47,1 ø58, 97 ø 500 400 1,6 300 4x) ( 4 200 0,8 24,4 M 100 7,95++1 40,5++1 0 25 50 75 100 125 CFM 50 100 150 200 m³/h 92 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 93 n max. 104 m3/h DC centrifugal fans atio m or Series REF 100 104 Ø x 25 mm nf I Highlights: – Pressure-optimisedblower. – Veryflatandpowerfulcentrifugalfan. s n a – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made f solutiontothespecificrequirementsofyourapplications. xial a – Backwardcurvedimpeller. C Generalcharacteristics: D – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. s n – Directionofairflowradial,directionofrotationclockwise,seenonrotor. a f – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. al g – Mass:160g ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.110 s- n a REF100-11/12 86 50,6 12 8...15 6,3 7,5 5400 -20...+75 80000/30000 135000 1 /2 f C D REF100-11/14 86 50,6 24 16...30 6,3 7,5 5400 -20...+75 80000/30000 135000 1 /2 REF100-11/18 86 50,6 48 36...60 6,3 7,5 5400 -20...+75 80000/30000 135000 1 /2 x REF100-11/18H 104 61,2 48 36...56 6,9 14,8 6700 -20...+70 67500/30000 120000 2 x a m - i / x x a m C A Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe s followingconditions: an 5 f 3, Centrifugalfanmountedonabaseplate127x127mm. al R Coverplate127x127mmwithanairinletofØ70mm, xi a Airflow concentrictotheimpeller. C A Airflow s n a f m al m g 2 24,9+-0,3 ntrifu 22,4+-0,4 ce Pa HO]2 AC [in 2 5,7+-0,3 500 400 1,6 1 es 300 1,2 72 56 sori O O es c 200 0,8 Ac 100 0,4 x) 0 1020 2040 30 60 40 8050 100 mCF³M/h M4(36tief6deep es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 93 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 94 190 DC centrifugal fans 3 max. m /h Series RER 101 101 Ø x 52 mm Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. – Backwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflowradial,directionofrotationclockwise,seenonrotor. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Mass:305g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.116 RER101-36/12NHH 190 111,8 12 9..13,6 7,2 20,5 5900 -20...+70 60000/30000 120000 1 RER101-36/14NHH 190 111,8 24 18..27,2 7,2 20,0 5900 -20...+70 60000/30000 120000 1 RER101-36/18NHH 190 111,8 48 43...52 7,2 19,0 5900 -20...+70 60000/30000 120000 1 /19 Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: Centrifugalfanmountedonabaseplate148x148mm. 7 R Coverplate148x148mmwithanairinletofØ66mm, concentrictotheimpeller. Airflow Airflow m m 1 36,7 Pa HO]2 [in 1 400 1,5 +0,2- 0 300 6 O 1,0 200 100 0,5 M4(3x)10deep10tief 67,,00++--00,,245 8,0+-0,55 50,25+-0,95 0 20 40 60 80 100 CFM 25 50 75 100 125 150 m³/h 51,7+-0,9 94 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 95 n max. 390 m3/h DC centrifugal fans atio m or Series RER 120TD 120 Ø x 54 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. s n – Backwardcurvedimpeller. fa – AvailableasstandardwithPWMcontrolinputandspeedsignal. xial Additionalinputsandoutputsonrequest. a C Generalcharacteristics: D – Impelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. s – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. an f – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. al g – Mass:430g. u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a NEW RER120-26/14/2TDMP* 320 188,2 24 16...32 tbd 51 5200 -20...+60 60000/37500 120000 1 f C D NEW RER120-26/14/2TDP 377 221,9 24 16...32 8,2 78 6100 -20...+60 55000/35000 110000 2 NEW RER120-26/18/2TDMP* 320 188,2 48 36...60 tbd 51 5200 -20...+60 57500/35000 115000 1 NEW RER120-26/18/2TDP 390 229,5 48 36...60 8,3 92 6300 -20...+60 50000/30000 100000 3 x x *Preliminary ma - Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, i / max.speedifcontrolcableisinterrupted. x x Thespecificservicelifeisvalidwhenanexternalcapacitoriswiredbetweentheplusandminusstrands.Pleasenotethe ma wiringsuggestion. C A Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated s n airflowandnoiselevelshavebeenmeasuredunderthe a f followingconditions: al xi Centrifugalfanmountedonabaseplate140x140mm. a R16Airflow Ccoonvceernptlraicteto14th0exim14p0elmlerm. withanairinletofØ96mm, AC Airflow s n a 1 f 6++ gal m u Pa HO]22m3 31010++ ACcentrif 600 [in 500 2 7,1 8,3 00,5++ 4 5 2 400 1,6 1 ø ø ø1 ories 230000 0,8 M4(4x)max.8max.8tiefdeep Access 13,5++1,5 100 26 54++1 0 50 100 150 200 CFM 100 200 300 m³/h es v ati nt e NNGG TT II PPWWMM AA HHPP 95 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 96 166 DC centrifugal fans 3 max. m /h Series RER 125 N 138 Ø x 35 mm Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. – Backwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflowradial,directionofrotationclockwise,seenonrotor. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Mass:320g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.112 RER125-19/12N 110 64,7 12 7...15 5,7 4,5 2650 -30...+75 62500/27500 125000 1 /12 RER125-19/14N 110 64,7 24 12...28 5,7 4,5 2650 -30...+75 62500/27500 125000 1 RER125-19/14NH 166 97,7 24 12...28 7,0 13,0 4000 -20...+70 55000/27500 110000 2 RER125-19/18N 110 64,7 48 36...56 5,7 5,0 2650 -30...+75 62500/27500 125000 1 Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: Centrifugalfanmountedonabaseplate220x220mm. Coverplate220x220mmwithanairinletofØ86mm, R5 concentrictotheimpeller. Airflow Airflow m 35 ++0,5 m 4 2 30,7++0,3 4 19 Pa [inHO]2 2 M4(2x) 5deep5tief 200 0,8 150 0,6 ø56ø47 ø125 1 100 0,4 ++10 50 0,2 400 ++1 6 0 20 40 60 80 CFM 25 50 75 100 125 m³/h 96 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 97 n max. 565 m3/h DC centrifugal fans atio m or Series RER 133TD 133 Ø x 91 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. s n – Backwardcurvedimpeller. fa – AvailableasstandardwithPWMcontrolinputandspeedsignal. xial Additionalinputsandoutputsonrequest. a C Generalcharacteristics: D – Impelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. s n – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. a f – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. al g – Mass:890g. ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a NEW RER133-41/14/2TDMP 460 270,6 24 16...30 tbd 53 5000 -20...+65 72500/40000 145000 1 f C D NEW RER133-41/14/2TDP* 565 332,4 24 16...36 tbd 90 6000 -20...+65 70000/37500 140000 2 NEW RER133-41/18/2TDMP* 460 270,6 48 36...57 tbd 50 5000 -20...+65 72500/40000 145000 1 NEW RER133-41/18/2TDP 565 332,4 48 36...72 8,2 87 6000 -20...+65 70000/37500 140000 2 x x a *Preliminary m - Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, i / max.speedifcontrolcableisinterrupted. x x a m C A Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe s n followingconditions: a f Centrifugalfanmountedonabaseplate140x140mm. al Coverplate140x140mmwithanairinletofØ87mm, xi R7Airflow concentrictotheimpeller. Ca A Airflow s n a m f m al 2 1++ ug 6 10++ centrif Pa HO]2 425 AC [in 2 460000 2,41,6 1 ø580,1++ ø720,3++ ø1330,5++ sories s 200 0,8 41 M4(4x)max.8tiefmax.8deep Acce 30,4++1,5 91++1 0 50 100 150 200 250 300 CFM 100 200 300 400 500 m³/h es v ati nt e NNGG TT II PPWWMM AA HHPP 97 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 98 255 DC centrifugal fans 3 max. m /h Series RER 160 N 165 Ø x 51 mm Highlights: – OptionalVario-Pro:Highlyadaptablesoftwareconfigurationofthefanenablesatailor-made solutiontothespecificrequirementsofyourapplications. – Backwardcurvedimpeller. Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Directionofairflowradial,directionofrotationclockwise,seenonrotor. – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. – Mass:590g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P.112 RER160-28/12N 255 150,1 12 7...14 6,4 19,0 3000 -20...+70 75000/35000 140000 1 /12 RER160-28/14N 255 150,1 24 12...28 6,4 19,0 3000 -20...+70 75000/35000 140000 1 RER160-28/18N 255 150,1 48 28...60 6,4 19,0 3000 -20...+70 75000/35000 140000 1 /12 Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: Centrifugalfanmountedonabaseplate260x260mm. Coverplate260x260mmwithanairinletofØ100mm, R5Airflow concentrictotheimpeller. Airflow m m 2 1++ 6 0 1 ++ 5 2 Pa HO]2 1 4 [in 200 0,8 150 0,6 ø580,1++ ø720,3++ ø1600,5++ 100 0,4 (4x)8tiefdeep M4max.max.8 50 0,2 6,1++0,8 50,3++0,7 0 20 40 60 80 100 120 CFM 50 100 150 200 m³/h 98 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 99 n max. 505 m3/h DC centrifugal fans atio m or Series RER 160 NTD 165 Ø x 51 mm nf I Highlights: – Controlinputs,alarmandspeedsignalsavailableonrequest. – 3-phasefandrivewithhighdegreeofrunningsmoothness. s n a – Highpressurebuild-up. f al – Backwardcurvedimpeller. xi a C D Generalcharacteristics: – Fibreglass-reinforcedplasticscrollhousingandimpeller;Housingbaseofsteelplate. – Fullyintegratedelectroniccommutation. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG22,TR64.Baredandtin-plated. a f – Mass:590g. al g u ntrif e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. s- n a NEW RER160-28/14N/2TDA 370 217 24 16...28 7,4 51 4200 -20...+60 55000/27500 110000 2 f C D NEW RER160-28/18N/2TDHHP* 505 297,5 48 36...60 8,5 142 6000 -20...+65 40000/22500 80000 3 min. 66 18,3 — 2,0 800 1 RER160-28/18NTD... 48 38...57 -20...+70 55000/27500 110000 x max. 354 98,3 7,4 43,0 4200 2 x a m - ModelRER160-28/18NTD...isavailableincustomer-specific,custom-developedvariantonly. i / Thedataspecifiedherearetechnicallyfeasiblebenchmarkvalues.Thefanscanbespeciallyadaptedtoyourapplicationwithsignal x x outputsandcontrolinputs. ma *Thespecificservicelifeisvalidwhenanexternalcapacitoriswiredbetweentheplusandminusstrands. C A Pleasenotethewiringsuggestion. Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thesta- s n tedairflowandnoiselevelshavebeenmeasuredunder fa thefollowingconditions: al R5 Centrifugalfanmountedonabaseplate260x260mm. axi Airflow Coverplate260x260mmwithanairinletofØ100 AC mm,concentrictotheimpeller. Airflow 2mm 180Pa0000[inHO]3,24,02 3 61++ ugalfans 600 2,4 10++ ntrif 5 e 2 c Pa HO]2 2 400 1,6 4 AC 500 [in 200 0,8 400 1,6 0 50100 100 200150 320000 250400 mCF³M/h ø580,1++ ø720,3++ ø1600,5++ es 320000 1,20,8 M4(4x)max.8tiefmax.8deep Accessori 6,1++0,8 100 0,4 50,3++0,7 1 nmin nmax 0 50 100 150 CFM 50 100 150 200 250 m³/h es v ati nt e NNGG TT II PPWWMM AA HHPP 99 pres e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 100 800 DC centrifugal fans 3 max. m /h Series REF 175TD 175 Ø x 55 mm Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up.Backwardcurvedimpeller. – AvailableasstandardwithPWMcontrolinputandspeedsignal. Additionalinputsandoutputsonrequest. Generalcharacteristics: – Impellerofgalvanisedsteelplate. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG20,TR64,speedsignalandcontrolinputAWG22, baredandtin-plated. – Mass:930g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW REF175-30/18/2TDP 800 470 48 36...72 8,3 121 4400 -20...+60 65000/37500 130000 1 Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, max.speedifcontrolcableisinterrupted. Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: Centrifugalfanmountedonabaseplate180x180mm. R10 Coverplate180x180mmwithanairinletofØ125,5mm, Airflow concentrictotheimpeller. Airflow m 1++ m 6 2 0 1 ++ 5 2 4 Pa HO]2 1 600 [in 450000 1,6 ø58++0,1 ø72++0,3 ø175++1,0 230000 0,8 M4(4x)max.8deeptiefmax.8 6,8++0,8 100 30 54,3++1 0 100 200 300 400 500 CFM 200 400 600 800 m³/h 100 NNGG TT II AA HHPP PPWWMM

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 101 n max. 980 m3/h DC centrifugal fans atio m or Series RER 175TD 175 Ø x 69 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up.Backwardcurvedimpeller. s n – AvailableasstandardwithPWMcontrolinputandspeedsignal. fa Additionalinputsandoutputsonrequest. xial Generalcharacteristics: a C D – Impelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignaland a f controlinputAWG22,baredandtin-plated. al g – Mass:775g. ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a NEW RER175-42/14/2TDMLP 600 353,0 24 16...30 7,3 45 3400 -20...+65 72500/45000 145000 1 f C D NEW RER175-42/14/2TDMP 865 508,8 24 16...36 8,2 110 4800 -20...+65 70000/40000 140000 2 NEW RER175-42/18/2TDMLP 600 353,0 48 36...57 7,3 46 3400 -20...+65 72500/45000 145000 1 NEW RER175-42/18/2TDMP* 865 508,8 48 36...72 8,2 110 4800 -20...+65 70000/40000 140000 2 x x a NEW RER175-42/18/2TDP 980 576,8 48 36...72 8,5 166 5400 -20...+65 60000/32500 115000 3 m - i *preliminarydata / Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, x x max.speedifcontrolcableisinterrupted. a m C A Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated s airflowandnoiselevelshavebeenmeasuredunderthe an followingconditions: alf Centrifugalfanmountedonabaseplate180x180mm. xi a R10 Coverplate180x180mmwithanairinletofØ125,5mm, AC Airflow concentrictotheimpeller. Airflow s n a f mm 61++ ugal 2 10++ entrif 5 c Pa HO]2 3 42 AC [in 800 3,2 600 2,4 2 ø580,1++ ø720,3++ ø1750,5++ ories s 240000 1,60,8 1 6M4(4x),8++max.8tiefmax.8deep0,8 Acces 42 0 100 200 300 400 500 CFM 69±1 200 400 600 800 m³/h es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP 101 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 102 970 DC centrifugal fans 3 max. m /h Series RER 190TD 190 Ø x 69 mm Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. – BackwardcurvedRadiCalimpellerwithmaximumefficiency. – Standardmodelsavailablewithmultifunctionalcontrolinputforanalogue,PWMandspeedsignal. Generalcharacteristics: – Impelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignalandcontrolinputAWG 22,baredandtin-plated. – Mass:870g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER190-39/14/2TDMLO 650 382,4 24 16...30 7,6 58 3000 -20...+60 55000/35000 110000 1 NEW RER190-39/14/2TDMO 860 505,9 24 16...36 7,9 110 3900 -20...+65 52500/30000 105000 2 NEW RER190-39/18/2TDMLO 650 382,4 48 36...57 7,6 56 3000 -20...+65 55000/35000 110000 1 NEW RER190-39/18/2TDMO 860 505,9 48 36...72 7,9 105 3900 -20...+65 52500/30000 105000 2 NEW RER190-39/18/2TDO 970 570,6 48 36...72 8,3 148 4400 -20...+65 40000/22500 80000 3 Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, standstillifcontrolcableisinterrupted. Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: R10 Centrifugalfanmountedonabaseplate195x195mm. Airflow Coverplate195x195mmwithanairinletofØ125,5mm, concentrictotheimpeller. Airflow m m 2 1 ++ 6 9[Pa]00 3,5[inHO]2 3 2510++ 800 4 670000 1,53 2 580,1++ 720,3++ 1900,3++ 500 2 1 340000 11,5 M4(4x)max.8tiefmax.8deep 200 39 100 0,5 6,5++1 69++1 0 100 200 300 400 500 600 [CFM] 200 400 600 800 1000 [m3/h] 102 NNGG TT II PPWWMM AA HHPP IIPP55¤44 SSPP

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 103 n max. 1280 m3/h DC centrifugal fans atio m or Series RER 220TD 221 Ø x 71 mm nf I Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. s n a – Backwardcurvedimpeller. f al – Standardmodelsavailablewithmultifunctionalcontrolinputforanalogue,PWMandspeedsign. xi a Generalcharacteristics: C D – Impelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. s n – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignalandcontrolinput a f AWG22,baredandtin-plated. al g – Mass:940g. ntrifu e Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingsBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDCc s Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours s- n a NEW RER220-44/14/2TDMO 1090 641,2 24 16...36 7,7 82 3000 -20...+55 75000/52500 150000 1 f C D NEW RER220-44/18/2TDMO 1090 641,2 48 36...72 7,7 80 3000 -20...+55 75000/52500 150000 1 NEW RER220-44/18/2TDO 1280 752,9 48 36...72 8,0 140 3500 -20...+55 55000/40000 110000 2 x Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, ax m standstillifcontrolcableisinterrupted. - i / x x a m C A Theairflowandnoiseleveloffanswithoutexternal housingdependsontheinstallationconditions.Thestated airflowandnoiselevelshavebeenmeasuredunderthe s n followingconditions: a R10 Centrifugalfanmountedonabaseplate230x230mm. alf Airflow Coverplate230x230mmwithanairinletofØ146mm, axi concentrictotheimpeller. C A Airflow m s m n 2 61++ alfa g u [Pa] [inHO]2 2 2510++ centrif 600 4 C 2,25 A 500 2 1 234000000 0,7511,251,51,75 ø++580,1M4(4x)ømax.8deep++720,3max.8tief ø220,9++0,5 Accessories 100 0,5 44,0 0,25 7,2++1,5 71++1 0 100 200 300 400 500 600 700 [CFM] 200 400 600 800 1000 1200 [m3/h] es v ati nt NNGG TT II PPWWMM AA HHPP IIPP55¤44 103 prese e R

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 104 1600 DC centrifugal fans 3 max. m /h Series RER 225TD 225 Ø x 99 mm Highlights: – 3-phasefandrivewithhighdegreeofrunningsmoothness. – Veryhighpressurebuild-up. – TDMandTDMLmodelwithbackward-curvedRadiCalimpellerwithmaximumefficiency. – Standardmodelsavailablewithmultifunctionalcontrolinputforanalogue,PWMandspeedsignal. Generalcharacteristics: – Impelleroffibreglass-reinforcedplastic. – Fullyintegratedelectroniccommutation. – Directionofrotation:CWseenonrotor. – Directionofairflow:axialairintake,centrifugalairexhaustoutoftheoutlet. – ConnectionviasinglestrandsAWG18,20orAWG22,TR64,speedsignalandcontrolinputAWG 22,baredandtin-plated. – Mass:1030g. s Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpowerlevel SintecsleevebearingBallbearings Powerinput Nominalspeed Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials Type m3/h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER225-55/18/2TDMLO 1080 635,4 48 36...72 7,5 82 2500 -20...+55 70000/50000 140000 1 NEW RER225-55/18/2TDMO 1210 711,9 48 36...72 7,9 120 2800 -20...+55 55000/40000 110000 2 NEW RER225-63/18/2TDP-402 1600 941,3 48 36...72 8,1 165 3300 -20...+55 52500/37500 105000 3 Speedcontrolrangefrom800rpmat7%PWMuptonominalspeedat>90%PWM.Standstillat0%PWM, TypeO:standstillatsensorbreak.TypeP:maximumspeedatsensorbreak. 1++ 6 TypeRER225-63 ++10 Theairflowandnoiseleveloffanswithoutexternal 5 2 housingdependsontheinstallationconditions.Thestated 4 airflowandnoiselevelshavebeenmeasuredunderthe followingconditions: R10Airflow CCeonvetrrifpulgaatelf2a3n0mxo2u3n0tedmomnwaitbhasaenpaliartienl2e3t0ofxØ231046mmmm., ø580,1++ ø720,3++ 2250,5 ø Airflow concentrictotheimpeller. M4(4x)max.8tiefmax.8deep max. 8,6++0,8 62,0 m m 2 99++1 7[Pa]00 [inHO]2,752 3 61++ 600 2,5 TypeRER225-55 10++ 2,25 2 425 500 2 234000000 0,7511,251,51,75 1 ø580,1++M4(4x)max.8deepmax.8tief72ø0,3++ 225ø0,5++ 100 0,5 55 0,25 10,6++1,5 0 100 200 300 400 500 600 700 800 900 [CFM] 99++1 200 400 600 800 1000 1200 1400 [m3/h] 104 NNGG TT II PPWWMM AA HHPP IIPP55¤44

Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 105 n max. 155 m3/h DC tangential fan atio m or Series QG 030 201...413 x 50 x 48 mm nf I Highlights: – Tangentialfanswithhighairflow. – Largeairoutlet. s n a f al Generalcharacteristics: xi a – Motorwithballbearingsystem.Impellermountingplatewithsleevebearings. C D – Fanhousingandimpellerofaluminium.Plastichousingsideparts. – Fullyintegratedelectroniccommutation. – Protectedagainstreversepolarityandlocking. – Airexhaustoutoftheoutlet. s n – Connectionviasinglestrands.Baredandtin-plated. a f – Mass:235/290/380/415g. al g u ntrif e c Nominaldata Airflow Airflow Nominalvoltage Voltagerange Soundpressurelevel Soundpowerlevel SleevebearingsBallbearings Powerinput Temperaturerange ServicelifeL(40°C)10ebm-papstStandard ServicelifeL(T)10maxebm-papstStandard LLifeexpectancy∆10(40°C)seeP.15 Curve Specials pecialsDC s Type m3/h CFM VDC VDC db(A) Bel(A) / Watts °C Hours Hours s- n a QG030-148/12 75 44,1 12 8...14 49 5,7 / 6,2 -20...+60 30000/10000 32500 1 Cf D QG030-198/12 100 58,9 12 8...14 51 5,8 / 8,0 -20...+60 30000/10000 32500 2 QG030-303/12 140 82,4 12 8...14 51 5,8 / 8,7 -20...+60 30000/10000 32500 3 QG030-353/12 155 91,3 12 8...14 51 5,9 / 9,6 -20...+60 30000/10000 32500 4 x x a QG030-148/14 75 44,1 24 16...28 49 5,7 / 6,2 -20...+60 30000/10000 32500 1 m - i QG030-198/14 100 58,9 24 16...28 51 5,8 / 8,0 -20...+60 30000/10000 32500 2 / x x QG030-303/14 140 82,4 24 16...28 51 5,8 / 8,7 -20...+60 30000/10000 32500 3 a m QG030-353/14 155 91,3 24 16...28 51 5,9 / 9,6 -20...+60 30000/10000 32500 4 AC Tangentialfansareonlysuitableforoperationwithhigh Type Dimension: L L1 rateandlowbackpressure. QG030-148/.. 201+1,5 148 s QG030-198/.. 258+1,5 198 an f QG030-303/.. 363+1,5 303 xial QG030-353/.. 413+1,5 353 Ca A Theservicelifevaluesrefertohorizontal installationofthefan. s n a f al g u 50 ntrif e 12 c Pa HO]2 AC [in 6 38,4 50 Ø2,3(8x) 10 L1 10 40 Ø9 30 0,150,10 47,5 Ø41+0,3 Ø35,1 cessories 20 ±10 Ac 0 10 0,05 3,2 30 5,4±0,7 16,5 21,5 L 1 2 3 4 10 34,4 0 15 30 45 60 75 CFM CCuutt-oouuttfofrosrqsuqaureanruetnMu3tDMIN35D6I2N-f5la6t2(6,xf)lat(6x) 20 40 60 80 100 120 m³/h es v ati nt e HHPP 105 pres e R