Surface Mount DIP Switches SerIeS 76HP FeAtUreS Side Actuated PIANO-DIP® • Compatible with SMt Assembly Including Infrared reflow and Vapor-Phase • easily Accessed when PC Boards are racked • reliable Spring and Ball Contact D DIMeNSIONS In inches (and millimeters) IP S LeNGtH ±.3 .8001 0 recommended PC Pad Dimensions witc ± .010 (0,25 (9,65 he See OrDer INFO .023 ± 0,25) s .055 ± .010 (5,84) .305 ± .010 (1,40 ± 0,25) reF. .530 .280 (7,11) (7,75 ± 0,25) .025 (0,64) r. (13,46) tyP. tyP. .100 ± .005 .303 ± .015 C LC L (2,54 ± 0,13) tyP. .012 ± .001 (7,70 ± 0,38) .070 (1,78) tyP. (0,30 ± 0,03) .424 ± .015 .100 (2,54) tyP. tyP. (t1y0P,7.7 ± 0,38) C LC L CIrCUItry Vibration Resistance: Per Method 204, test Materials and finishes As viewed from Condition B. 1 mS opening (10 mS allowed) Shorting Member: Brass, gold-plated the top of the Mechanical Shock: Per Method 213, test over nickel barrier. switch in the Condition A. 1 mS opening (10 mS allowed) Base contacts: Copper alloy, gold-plated, positions shown thermal Shock Resistance: Per specification; over nickel barrier. in the drawing. no failures; passes contact resistance terminals: Copper alloy, matte tin plated over terminal Strength: Per specification nickel barrier. thermal aging: 1,000 hours at 85°C; no Non-Conductive Parts: Cover is natural color failures thermoplastic, actuators are white thermoplastic SpecificationS (UL94V-O) electrical Ratings environmental Ratings tape Seal: Not available with tape Seal. Make-and-break current Rating: 2,000 Meets all requirements of MIL- S-83504**. Where operations per switch position at 1 mA, 5 Vdc; Grayhill performance is superior, the MIL spec tAPe AND reeL PACkAGING 50 mA, 30 Vdc; or 150 mA, 30 Vdc is listed in parentheses. Meets requirements of contact Resistance: Initial: 30 mohms operating temperature Range: -40°C to + eIA 481-2 or eIA 481-3 maximum; After Life: 100 mohms maximum 85°C 13 INCH (10 mA at 50 Vdc, open circuit) Storage temperature Range: -55°C to + DIAMeter reeL insulation Resistance: Minimum, at 100 Vdc 85°C between adjacent closed contacts and also Moisture Resistance: Per MIL-StD-202, across open switch contacts. Initial: 2,000 Method 106 Mohms Dielectric Strength: Minimum voltage (AC Soldering information CONDUCtIVe rMS) measured between adjacent closed Solderability: Per MIL-StD-202, Method 208 PLAStIC eMBOSSeD contacts and also across open switch contacts. tested to eIA Standard rS-448-2. tAPe Initial: 750 volts; After Life: 500 volts Resistance to Soldering Heat: Per MIL-S-83504, carry Rating: 5 amps, maximum rise of 20°C six second test Switch Capacitance: 2 pF at 1 megahertz Recommended processing temperature: 220°C–230°C (1 pass—260°C maximum) DIreCtION Mechanical Ratings processing position: Switch is to be processed OF FeeD Mechanical Life: 2,000 operations per switch with all actuators in the closed (on) position as 16mm 16 &tA 2P4emm position shipped. OPeNXXXX08GW76HPSB OPeNXXXX08GW76HPSB OPeNXXXX08GW76HPSB OrDerING INFOrMAtION: tape and reel Packaging (500 switches per reel) PoNsoit.i oonf s * (Linecnhgeths ) (Lmeentgritch) CarDrieimr .W Ai d th NuPmarbter OPeN76HPSB08GW OPeN76HPSB08GW OPeN76HPSB08GW XXXX XXXX XXXX 2 0.280" 7,1 mm 24 mm 76HPSB02GWrt 4 0.480" 12,2 mm 24 mm 76HPSB04GWrt 16mm 32, 44 & 6 0.680" 17,3 mm 32 mm 76HPSB06GWrt 56mm 8 0.880" 22,4 mm 44 mm 76HPSB08GWrt PIN ONe LOCAtION tAPe 10 1.080" 27,4 mm 44 mm 76HPSB10GWrt COVer tAPe * For other lengths, contact Grayhill, Inc. DIM. A (See OrDer INFO.) ** Note: 100% matte tin terminal plating does not meet MIL-S-83504 for lead content. each reel has a 15.750 inch (390 mm) minimum leader and a 6.30 inch (160 mm) Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, minimum trailer. an authorized local Distributor or Grayhill. DIP Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com 8